drivers/microsemi/ea1000yang/src/main/yang/fpga-internal.yang

module fpga-internal {

	/*** NAMESPACE / PREFIX DEFINITION ***/

	namespace "http://www.microsemi.com/fpga-int";
	prefix "fpga-int";

	/*** META INFORMATION ***/

	organization
	"Microsemi Inc., FTD Division";

	contact
	"Web URL: http://www.microsemi.com/
	E-mail: info@microsemi.com
	Postal: Microsemi Corporation Corporate Headquarters
	One Enterprise Aliso Viejo,
	CA 92656
	U.S.A.
	Phone: +1 949 380 6100
	Fax: +1 949 215-4996";

	description
	"This YANG module add internal procedures to access FPAA hardware

	Copyright 2015 Microsemi Inc.
	All rights reserved.";

	revision "2015-11-30" {
		description
		"Initial version - Sean Condon, Microsemi";
	}

	typedef sixteen-bit-hex {
		type string {
			pattern '0x[0-9a-fA-F]{4}';
		}

		description
		"A 16-bit address represented as a hexadecimal number";
	}

	typedef thirtytwo-bit-hex {
		type string {
			pattern '0x[0-9a-fA-F]{8}';
		}

		description
		"A 32-bit address represented as a hexadecimal number";
	}
	
	typedef thirtytwobit-data {
		type string {
			pattern '([0-9a-fA-F]{8}(:[0-9a-fA-F]{8})*)?';
		}

		description
		"A set of 32 bit data values represented as colon separated 
		hex strings e.g. 'A1B2C3D4:B2C3D4F5:C3D4E5F6'";
	}

	typedef select-ram-enum {
		type enumeration {
			enum pkt-store-sel {value 0;}
			enum probe-store-sel {value 1;}
			enum xconn-store-sel {value 2;}
			enum rmep-err-store-sel {value 3;}
			enum rx-lmep-map-sel {value 4;}
			enum cpu-sys-capt-fifo-sel {value 5;}
			enum rmep-ram-sel {value 6;}
			enum xconn-ram-sel {value 7;}
			enum rmep-err-ram-sel {value 8;}
			enum tx-lmep-map-sel {value 9;}
			enum ext-sram-sel {value 10;}
			enum car-rmac-sel {value 11;}
			enum sys-mac-sel {value 12;}
			enum rx-carr-data-fifo-sel {value 13;}
			enum line-stats-ram-sel {value 14;}
			enum cpu-sys-capt-info-fifo-sel {value 15;}
			enum vlan-info-ram-sel {value 16;}
			enum lbm-store-sel {value 17;}
			enum lbr-ram-sel {value 18;}
			enum mc-lbr-store-sel {value 19;}
			enum port-mac-ram-sel {value 20;}
			enum pm-db-ram-sel {value 22;}
			enum tx-lb-ram-sel {value 24;}
			enum tlv-ram-sel {value 25;}
			enum cpu-capt-fifo-sel {value 26;}
			enum cpu-capt-info-fifo-sel {value 27;}
			enum policer-cfg-ram-sel {value 28;}
			enum policer-ctxt-ram-sel {value 29;}
			enum cpu-sys-tx-ram-sel {value 30;}
			enum policer-stats-ram-sel {value 31;}
		}
	}
	
	
	container fpga-internal {
		presence "Supports FPGA direct access";
	}
	
	rpc read-registers {

		description "Method to read directly from hardware registers";
		input {
			choice hex-or-dec {
				
				description "Enter the starting address in either decimal (0-65535) 
						or hexadecimal (preceeded with 0x)";
				mandatory true;

				case hex {
					leaf start-address-hex {
						type sixteen-bit-hex;
					}
				}

				case decimal {
					leaf start-address-dec {
						type uint16;
					}
				}
			}

			leaf num-locations {
				type uint8 {
					range 1..max;
				}
				description "The number of following locations (addresses) to read from";
				default 1;
			}
		}

		output {
            anyxml data {
				description "A set of 32 bit data values represented 
						as colon separated 8 character hexadecimal values";
			}
		}
	}
	

	rpc write-registers {

		description "Method to write directly to hardware registers.
				If a number of data values are given then subsequent
				locations are written to";
		input {
			choice hex-or-dec {
				
				description "Enter the starting address in either decimal (0-65535) 
						or hexadecimal (preceeded with 0x)";
				
				case hex {
					leaf start-address-hex {
						type sixteen-bit-hex;
					}
				}

				case decimal {
					leaf start-address-dec {
						type uint16;
					}
				}
			}

			leaf value-hex-32 {
				type thirtytwobit-data;
				description "A set of 32 bit data values represented 
						as colon separated 8 character hexadecimal values
						e.g. ffffffff:ffffffff:ffffffff
						The number of locations written to will be 
						determinted by the number of such values given";
			}
		}
	}

	rpc read-ram {

		description "Method to read directly from hardware RAM";
		input {
			leaf ram {
				type select-ram-enum;
				mandatory true;
				description "The type of RAM to read from";
			}
			
			choice hex-or-dec {
				
				description "Enter the starting address in either decimal (0-65535) 
						or hexadecimal (preceeded with 0x)";
				mandatory true;

				case hex {
					leaf start-address-hex {
						type thirtytwo-bit-hex;
					}
				}

				case decimal {
					leaf start-address-dec {
						type uint32;
					}
				}
			}
			
			leaf num-locations {
				type uint8 {
					range 1..max;
				}
				description "The number of following locations (addresses) to read from";
				default 1;
			}
		}

		output {
            anyxml data {
				description "A set of 32 bit data values represented 
						as colon separated 8 character hexadecimal values";
			}
		}
	}

	rpc write-ram {

		description "Method to write directly to RAM registers.
				If a number of data values are given then subsequent
				locations are written to";
		input {
			leaf ram {
				type select-ram-enum;
				mandatory true;
				description "The type of RAM to read from";
			}

			choice hex-or-dec {
				
				description "Enter the starting address in either decimal (0-65535) 
						or hexadecimal (preceeded with 0x)";
				mandatory true;
				
				case hex {
					leaf start-address-hex {
						type thirtytwo-bit-hex;
					}
				}

				case decimal {
					leaf start-address-dec {
						type uint32;
					}
				}
			}

			leaf value-hex-32 {
				type thirtytwobit-data;
				description "A set of 32 bit data values represented 
						as colon separated 8 character hexadecimal values
						e.g. ffffffff:ffffffff:ffffffff
						The number of locations written to will be 
						determinted by the number of such values given";
			}
		}
	}

}