| #!/usr/bin/python |
| |
| """ |
| Libraries for creating L3 topologies with routing protocols. |
| """ |
| |
| from mininet.node import Host, OVSBridge |
| from mininet.nodelib import NAT |
| from mininet.log import info, debug, error |
| from mininet.cli import CLI |
| from ipaddress import ip_network, ip_address, ip_interface |
| import os |
| |
| class RoutedHost(Host): |
| """Host that can be configured with multiple IP addresses.""" |
| def __init__(self, name, ips, gateway, *args, **kwargs): |
| super(RoutedHost, self).__init__(name, *args, **kwargs) |
| |
| self.ips = ips |
| self.gateway = gateway |
| |
| def config(self, **kwargs): |
| Host.config(self, **kwargs) |
| |
| self.cmd('ip addr flush dev %s' % self.defaultIntf()) |
| for ip in self.ips: |
| self.cmd('ip addr add %s dev %s' % (ip, self.defaultIntf())) |
| |
| self.cmd('ip route add default via %s' % self.gateway) |
| |
| class Router(Host): |
| |
| """An L3 router. |
| Configures the Linux kernel for L3 forwarding and supports rich interface |
| configuration of IP addresses, MAC addresses and VLANs.""" |
| |
| def __init__(self, name, interfaces, *args, **kwargs): |
| super(Router, self).__init__(name, **kwargs) |
| |
| self.interfaces = interfaces |
| |
| def config(self, **kwargs): |
| super(Host, self).config(**kwargs) |
| |
| self.cmd('sysctl net.ipv4.ip_forward=1') |
| self.cmd('sysctl net.ipv4.conf.all.rp_filter=0') |
| |
| for intf, configs in self.interfaces.items(): |
| self.cmd('ip addr flush dev %s' % intf) |
| self.cmd( 'sysctl net.ipv4.conf.%s.rp_filter=0' % intf ) |
| |
| if not isinstance(configs, list): |
| configs = [configs] |
| |
| for attrs in configs: |
| # Configure the vlan if there is one |
| if 'vlan' in attrs: |
| vlanName = '%s.%s' % (intf, attrs['vlan']) |
| self.cmd('ip link add link %s name %s type vlan id %s' % |
| (intf, vlanName, attrs['vlan'])) |
| self.cmd('ip link set %s up' % vlanName) |
| addrIntf = vlanName |
| else: |
| addrIntf = intf |
| |
| # Now configure the addresses on the vlan/native interface |
| if 'mac' in attrs: |
| self.cmd('ip link set %s down' % addrIntf) |
| self.cmd('ip link set %s address %s' % (addrIntf, attrs['mac'])) |
| self.cmd('ip link set %s up' % addrIntf) |
| for addr in attrs['ipAddrs']: |
| self.cmd('ip addr add %s dev %s' % (addr, addrIntf)) |
| |
| class QuaggaRouter(Router): |
| |
| """Runs Quagga to create a router that can speak routing protocols.""" |
| |
| binDir = '/usr/lib/quagga' |
| logDir = '/var/log/quagga' |
| |
| def __init__(self, name, interfaces, |
| defaultRoute=None, |
| zebraConfFile=None, |
| protocols=[], |
| fpm=None, |
| runDir='/var/run/quagga', *args, **kwargs): |
| super(QuaggaRouter, self).__init__(name, interfaces, **kwargs) |
| |
| self.protocols = protocols |
| self.fpm = fpm |
| |
| for p in self.protocols: |
| p.setQuaggaRouter(self) |
| |
| self.runDir = runDir |
| self.defaultRoute = defaultRoute |
| |
| # Ensure required directories exist |
| try: |
| original_umask = os.umask(0) |
| if (not os.path.isdir(QuaggaRouter.logDir)): |
| os.makedirs(QuaggaRouter.logDir, 0777) |
| if (not os.path.isdir(self.runDir)): |
| os.makedirs(self.runDir, 0777) |
| finally: |
| os.umask(original_umask) |
| |
| self.zebraConfFile = zebraConfFile |
| if (self.zebraConfFile is None): |
| self.zebraConfFile = '%s/zebrad%s.conf' % (self.runDir, self.name) |
| self.generateZebra() |
| |
| self.socket = '%s/zebra%s.api' % (self.runDir, self.name) |
| |
| self.zebraPidFile = '%s/zebra%s.pid' % (self.runDir, self.name) |
| |
| def generateZebra(self): |
| configFile = open(self.zebraConfFile, 'w+') |
| configFile.write('log file %s/zebrad%s.log\n' % (QuaggaRouter.logDir, self.name)) |
| configFile.write('hostname zebra-%s\n' % self.name) |
| configFile.write('password %s\n' % 'quagga') |
| if (self.fpm is not None): |
| configFile.write('fpm connection ip %s port 2620' % self.fpm) |
| configFile.close() |
| |
| def config(self, **kwargs): |
| super(QuaggaRouter, self).config(**kwargs) |
| |
| self.cmd('%s/zebra -d -f %s -z %s -i %s' |
| % (QuaggaRouter.binDir, self.zebraConfFile, self.socket, self.zebraPidFile)) |
| |
| for p in self.protocols: |
| p.config(**kwargs) |
| |
| if self.defaultRoute: |
| self.cmd('ip route add default via %s' % self.defaultRoute) |
| |
| def terminate(self, **kwargs): |
| self.cmd("ps ax | grep '%s' | awk '{print $1}' | xargs kill" |
| % (self.socket)) |
| |
| for p in self.protocols: |
| p.terminate(**kwargs) |
| |
| super(QuaggaRouter, self).terminate() |
| |
| class Protocol(object): |
| |
| """Base abstraction of a protocol that the QuaggaRouter can run.""" |
| |
| def setQuaggaRouter(self, qr): |
| self.qr = qr |
| |
| def config(self, **kwargs): |
| pass |
| |
| def terminate(self, **kwargs): |
| pass |
| |
| class BgpProtocol(Protocol): |
| |
| """Configures and runs the BGP protocol in Quagga.""" |
| |
| def __init__(self, configFile=None, asNum=None, neighbors=[], routes=[], *args, **kwargs): |
| self.configFile = configFile |
| |
| self.asNum = asNum |
| self.neighbors = neighbors |
| self.routes = routes |
| |
| def config(self, **kwargs): |
| if self.configFile is None: |
| self.configFile = '%s/bgpd%s.conf' % (self.qr.runDir, self.qr.name) |
| self.generateConfig() |
| |
| bgpdPidFile = '%s/bgpd%s.pid' % (self.qr.runDir, self.qr.name) |
| |
| self.qr.cmd('%s/bgpd -d -f %s -z %s -i %s' |
| % (QuaggaRouter.binDir, self.configFile, self.qr.socket, bgpdPidFile)) |
| |
| def generateConfig(self): |
| conf = ConfigurationWriter(self.configFile) |
| |
| def getRouterId(interfaces): |
| intfAttributes = interfaces.itervalues().next() |
| print intfAttributes |
| if isinstance(intfAttributes, list): |
| # Try use the first set of attributes, but if using vlans they might not have addresses |
| intfAttributes = intfAttributes[1] if not intfAttributes[0]['ipAddrs'] else intfAttributes[0] |
| return intfAttributes['ipAddrs'][0].split('/')[0] |
| |
| conf.writeLine('log file %s/bgpd%s.log' % (QuaggaRouter.logDir, self.qr.name)) |
| conf.writeLine('hostname bgp-%s' % self.qr.name); |
| conf.writeLine('password %s' % 'quagga') |
| conf.writeLine('!') |
| conf.writeLine('router bgp %s' % self.asNum) |
| |
| conf.indent() |
| |
| conf.writeLine('bgp router-id %s' % getRouterId(self.qr.interfaces)) |
| conf.writeLine('timers bgp %s' % '3 9') |
| conf.writeLine('!') |
| |
| for neighbor in self.neighbors: |
| conf.writeLine('neighbor %s remote-as %s' % (neighbor['address'], neighbor['as'])) |
| conf.writeLine('neighbor %s ebgp-multihop' % neighbor['address']) |
| conf.writeLine('neighbor %s timers connect %s' % (neighbor['address'], '5')) |
| conf.writeLine('neighbor %s advertisement-interval %s' % (neighbor['address'], '5')) |
| if 'port' in neighbor: |
| conf.writeLine('neighbor %s port %s' % (neighbor['address'], neighbor['port'])) |
| conf.writeLine('!') |
| |
| for route in self.routes: |
| conf.writeLine('network %s' % route) |
| |
| conf.close() |
| |
| class OspfProtocol(Protocol): |
| |
| """Configures and runs the OSPF protocol in Quagga.""" |
| |
| def __init__(self, configFile=None, *args, **kwargs): |
| self.configFile = configFile |
| |
| def config(self, **kwargs): |
| if self.configFile is None: |
| self.configFile = '%s/ospfd%s.conf' % (self.qr.runDir, self.qr.name) |
| self.generateConfig() |
| |
| ospfPidFile = '%s/ospf%s.pid' % (self.qr.runDir, self.qr.name) |
| |
| self.qr.cmd('%s/ospfd -d -f %s -z %s -i %s' |
| % (QuaggaRouter.binDir, self.configFile, self.qr.socket, ospfPidFile)) |
| |
| def generateConfig(self): |
| conf = ConfigurationWriter(self.configFile) |
| |
| def getRouterId(interfaces): |
| intfAttributes = interfaces.itervalues().next() |
| print intfAttributes |
| if isinstance(intfAttributes, list): |
| # Try use the first set of attributes, but if using vlans they might not have addresses |
| intfAttributes = intfAttributes[1] if not intfAttributes[0]['ipAddrs'] else intfAttributes[0] |
| return intfAttributes['ipAddrs'][0].split('/')[0] |
| |
| conf.writeLine('hostname ospf-%s' % self.qr.name); |
| conf.writeLine('password %s' % 'hello') |
| conf.writeLine('!') |
| conf.writeLine('router ospf') |
| |
| conf.indent() |
| |
| conf.writeLine('ospf router-id %s' % getRouterId(self.qr.interfaces)) |
| conf.writeLine('!') |
| |
| for name, intf in self.qr.interfaces.items(): |
| for ip in intf['ipAddrs']: |
| conf.writeLine('network %s area 0' % ip) |
| #if intf['ipAddrs'][0].startswith('192.168'): |
| # writeLine(1, 'passive-interface %s' % name) |
| |
| conf.close() |
| |
| class PimProtocol(Protocol): |
| |
| """Configures and runs the PIM protcol in Quagga.""" |
| |
| def __init__(self, configFile=None, *args, **kwargs): |
| self.configFile = configFile |
| |
| def config(self, **kwargs): |
| pimPidFile = '%s/pim%s.pid' % (self.qr.runDir, self.qr.name) |
| |
| self.qr.cmd('%s/pimd -Z -d -f %s -z %s -i %s' |
| % (QuaggaRouter.binDir, self.configFile, self.qr.socket, pimPidFile)) |
| |
| class ConfigurationWriter(object): |
| |
| """Utility class for writing a configuration file.""" |
| |
| def __init__(self, filename): |
| self.filename = filename |
| self.indentValue = 0; |
| |
| self.configFile = open(self.filename, 'w+') |
| |
| def indent(self): |
| self.indentValue += 1 |
| |
| def unindent(self): |
| if (self.indentValue > 0): |
| self.indentValue -= 1 |
| |
| def write(self, string): |
| self.configFile.write(string) |
| |
| def writeLine(self, string): |
| intentStr = '' |
| for _ in range(0, self.indentValue): |
| intentStr += ' ' |
| self.write('%s%s\n' % (intentStr, string)) |
| |
| def close(self): |
| self.configFile.close() |
| |
| #Backward compatibility for BGP-only use case |
| class BgpRouter(QuaggaRouter): |
| |
| """Quagga router running the BGP protocol.""" |
| |
| def __init__(self, name, interfaces, |
| asNum, neighbors, routes=[], |
| defaultRoute=None, |
| quaggaConfFile=None, |
| zebraConfFile=None, |
| *args, **kwargs): |
| bgp = BgpProtocol(configFile=quaggaConfFile, asNum=asNum, neighbors=neighbors, routes=routes) |
| |
| super(BgpRouter, self).__init__(name, interfaces, |
| zebraConfFile=zebraConfFile, |
| defaultRoute=defaultRoute, |
| protocols=[bgp], |
| *args, **kwargs) |
| |
| class RouterData(object): |
| |
| """Internal data structure storing information about a router.""" |
| |
| def __init__(self, index): |
| self.index = index; |
| self.neighbors = [] |
| self.interfaces = {} |
| self.switches = [] |
| |
| def addNeighbor(self, theirAddress, theirAsNum): |
| self.neighbors.append({'address':theirAddress.ip, 'as':theirAsNum}) |
| |
| def addInterface(self, intf, vlan, address): |
| if not intf in self.interfaces: |
| self.interfaces[intf] = InterfaceData(intf) |
| |
| self.interfaces[intf].addAddress(vlan, address) |
| |
| def setSwitch(self, switch): |
| self.switches.append(switch) |
| |
| class InterfaceData(object): |
| |
| """Internal data structure storing information about an interface.""" |
| |
| def __init__(self, number): |
| self.number = number |
| self.addressesByVlan = {} |
| |
| def addAddress(self, vlan, address): |
| if not vlan in self.addressesByVlan: |
| self.addressesByVlan[vlan] = [] |
| |
| self.addressesByVlan[vlan].append(address.with_prefixlen) |
| |
| class RoutedNetwork(object): |
| |
| """Creates a host behind a router. This is common boilerplate topology |
| segment in routed networks.""" |
| |
| @staticmethod |
| def build(topology, router, hostName, networks): |
| # There's a convention that the router's addresses are already set up, |
| # and it has the last address in the network. |
| |
| def getFirstAddress(network): |
| return '%s/%s' % (network[1], network.prefixlen) |
| |
| defaultRoute = AutonomousSystem.getLastAddress(networks[0]).ip |
| |
| host = topology.addHost(hostName, cls=RoutedHost, |
| ips=[getFirstAddress(network) for network in networks], |
| gateway=defaultRoute) |
| |
| topology.addLink(router, host) |
| |
| class AutonomousSystem(object): |
| |
| """Base abstraction of an autonomous system, which implies some internal |
| topology and connections to other topology elements (switches/other ASes).""" |
| |
| psIdx = 1 |
| |
| def __init__(self, asNum, numRouters): |
| self.asNum = asNum |
| self.numRouters = numRouters |
| self.routers = {} |
| for i in range(1, numRouters + 1): |
| self.routers[i] = RouterData(i) |
| |
| self.routerNodes={} |
| |
| self.neighbors=[] |
| self.vlanAddresses={} |
| |
| def peerWith(self, myRouter, myAddress, theirAddress, theirAsNum, intf=1, vlan=None): |
| router = self.routers[myRouter] |
| |
| router.addInterface(intf, vlan, myAddress) |
| router.addNeighbor(theirAddress, theirAsNum) |
| |
| def getRouter(self, i): |
| return self.routerNodes[i] |
| |
| @staticmethod |
| def generatePeeringAddresses(): |
| network = ip_network(u'10.0.%s.0/24' % AutonomousSystem.psIdx) |
| AutonomousSystem.psIdx += 1 |
| |
| return ip_interface('%s/%s' % (network[1], network.prefixlen)), \ |
| ip_interface('%s/%s' % (network[2], network.prefixlen)) |
| |
| @staticmethod |
| def addPeering(as1, as2, router1=1, router2=1, intf1=1, intf2=1, address1=None, address2=None, useVlans=False): |
| vlan = AutonomousSystem.psIdx if useVlans else None |
| |
| if address1 is None or address2 is None: |
| (address1, address2) = AutonomousSystem.generatePeeringAddresses() |
| |
| as1.peerWith(router1, address1, address2, as2.asNum, intf=intf1, vlan=vlan) |
| as2.peerWith(router2, address2, address1, as1.asNum, intf=intf2, vlan=vlan) |
| |
| @staticmethod |
| def getLastAddress(network): |
| return ip_interface(network.network_address + network.num_addresses - 2) |
| |
| @staticmethod |
| def getIthAddress(network, i): |
| return ip_interface('%s/%s' % (network[i], network.prefixlen)) |
| |
| class BasicAutonomousSystem(AutonomousSystem): |
| |
| """Basic autonomous system containing one host and one or more routers |
| which peer with other ASes.""" |
| |
| def __init__(self, num, routes, numRouters=1): |
| super(BasicAutonomousSystem, self).__init__(65000+num, numRouters) |
| self.num = num |
| self.routes = routes |
| |
| def addLink(self, switch, router=1): |
| self.routers[router].setSwitch(switch) |
| |
| def build(self, topology): |
| self.addRouterAndHost(topology) |
| |
| def addRouterAndHost(self, topology): |
| |
| # TODO implementation is messy and needs to be cleaned up |
| |
| intfs = {} |
| |
| router = self.routers[1] |
| for i, router in self.routers.items(): |
| |
| #routerName = 'r%i%i' % (self.num, i) |
| routerName = 'r%i' % self.num |
| if not i==1: |
| routerName += ('%i' % i) |
| |
| hostName = 'h%i' % self.num |
| |
| for j, interface in router.interfaces.items(): |
| nativeAddresses = interface.addressesByVlan.pop(None, []) |
| peeringIntf = [{'mac' : '00:00:%02x:00:%02x:%02x' % (self.num, i, j), |
| 'ipAddrs' : nativeAddresses}] |
| |
| for vlan, addresses in interface.addressesByVlan.items(): |
| peeringIntf.append({'vlan':vlan, |
| 'mac':'00:00:%02x:%02x:%02x:%02x' % (self.num, vlan, i, j), |
| 'ipAddrs':addresses}) |
| |
| intfs.update({'%s-eth%s' % (routerName, j-1) : peeringIntf}) |
| |
| # Only add the host to the first router for now |
| if i==1: |
| internalAddresses=[] |
| for route in self.routes: |
| internalAddresses.append('%s/%s' % (AutonomousSystem.getLastAddress(route).ip, route.prefixlen)) |
| |
| internalIntf = {'ipAddrs' : internalAddresses} |
| |
| # This is the configuration of the next interface after all the peering interfaces |
| intfs.update({'%s-eth%s' % (routerName, len(router.interfaces.keys())) : internalIntf}) |
| |
| routerNode = topology.addHost(routerName, |
| asNum=self.asNum, neighbors=router.neighbors, |
| routes=self.routes, |
| cls=BgpRouter, interfaces=intfs) |
| |
| self.routerNodes[i] = routerNode |
| |
| for switch in router.switches: |
| topology.addLink(switch, routerNode) |
| |
| # Only add the host to the first router for now |
| if i==1: |
| defaultRoute = internalAddresses[0].split('/')[0] |
| |
| host = topology.addHost(hostName, cls=RoutedHost, |
| ips=[self.getFirstAddress(route) for route in self.routes], |
| gateway=defaultRoute) |
| |
| topology.addLink(routerNode, host) |
| |
| #def getLastAddress(self, network): |
| # return ip_address(network.network_address + network.num_addresses - 2) |
| |
| def getFirstAddress(self, network): |
| return '%s/%s' % (network[1], network.prefixlen) |
| |
| # TODO fix this AS - doesn't currently work |
| class RouteServerAutonomousSystem(BasicAutonomousSystem): |
| |
| def __init__(self, routerAddress, *args, **kwargs): |
| BasicAutonomousSystem.__init__(self, *args, **kwargs) |
| |
| self.routerAddress = routerAddress |
| |
| def build(self, topology, connectAtSwitch): |
| |
| switch = topology.addSwitch('as%isw' % self.num, cls=OVSBridge) |
| |
| self.addRouterAndHost(topology, self.routerAddress, switch) |
| |
| rsName = 'rs%i' % self.num |
| routeServer = topology.addHost(rsName, |
| self.asnum, self.neighbors, |
| cls=BgpRouter, |
| interfaces={'%s-eth0' % rsName : {'ipAddrs':[self.peeringAddress]}}) |
| |
| topology.addLink(routeServer, switch) |
| topology.addLink(switch, connectAtSwitch) |
| |
| class SdnAutonomousSystem(AutonomousSystem): |
| |
| """Runs the internal BGP speakers needed for ONOS routing apps like |
| SDN-IP.""" |
| |
| routerIdx = 1 |
| |
| def __init__(self, onosIps, num=1, numBgpSpeakers=1, asNum=65000, externalOnos=True, |
| peerIntfConfig=None, withFpm=False): |
| super(SdnAutonomousSystem, self).__init__(asNum, numBgpSpeakers) |
| self.onosIps = onosIps |
| self.num = num |
| self.numBgpSpeakers = numBgpSpeakers |
| self.peerIntfConfig = peerIntfConfig |
| self.withFpm = withFpm |
| self.externalOnos= externalOnos |
| self.internalPeeringSubnet = ip_network(u'1.1.1.0/24') |
| |
| for router in self.routers.values(): |
| # Add iBGP sessions to ONOS nodes |
| for onosIp in onosIps: |
| router.neighbors.append({'address':onosIp, 'as':asNum, 'port':2000}) |
| |
| # Add iBGP sessions to other BGP speakers |
| for i, router2 in self.routers.items(): |
| if router == router2: |
| continue |
| cpIpBase = self.num*10 |
| ip = AutonomousSystem.getIthAddress(self.internalPeeringSubnet, cpIpBase+i) |
| router.neighbors.append({'address':ip.ip, 'as':asNum}) |
| |
| def build(self, topology, connectAtSwitch, controlSwitch): |
| |
| natIp = AutonomousSystem.getLastAddress(self.internalPeeringSubnet) |
| |
| for i, router in self.routers.items(): |
| num = SdnAutonomousSystem.routerIdx |
| SdnAutonomousSystem.routerIdx += 1 |
| name = 'bgp%s' % num |
| |
| cpIpBase = self.num*10 |
| ip = AutonomousSystem.getIthAddress(self.internalPeeringSubnet, cpIpBase+i) |
| |
| eth0 = { 'ipAddrs' : [ str(ip) ] } |
| if self.peerIntfConfig is not None: |
| eth1 = self.peerIntfConfig |
| else: |
| nativeAddresses = router.interfaces[1].addressesByVlan.pop(None, []) |
| eth1 = [{ 'mac':'00:00:00:00:00:%02x' % num, |
| 'ipAddrs' : nativeAddresses }] |
| |
| for vlan, addresses in router.interfaces[1].addressesByVlan.items(): |
| eth1.append({'vlan':vlan, |
| 'mac':'00:00:00:%02x:%02x:00' % (num, vlan), |
| 'ipAddrs':addresses}) |
| |
| |
| intfs = { '%s-eth0' % name : eth0, |
| '%s-eth1' % name : eth1 } |
| |
| bgp = topology.addHost( name, cls=BgpRouter, asNum=self.asNum, |
| neighbors=router.neighbors, |
| interfaces=intfs, |
| defaultRoute=str(natIp.ip), |
| fpm=self.onosIps[0] if self.withFpm else None ) |
| |
| topology.addLink( bgp, controlSwitch ) |
| topology.addLink( bgp, connectAtSwitch ) |
| |
| |
| if self.externalOnos: |
| nat = topology.addHost('nat', cls=NAT, |
| ip='%s/%s' % (natIp.ip, self.internalPeeringSubnet.prefixlen), |
| subnet=str(self.internalPeeringSubnet), inNamespace=False); |
| topology.addLink(controlSwitch, nat) |
| |
| |
| def generateRoutes(baseRange, numRoutes, subnetSize=None): |
| baseNetwork = ip_network(baseRange) |
| |
| # We need to get at least 2 addresses out of each subnet, so the biggest |
| # prefix length we can have is /30 |
| maxPrefixLength = baseNetwork.max_prefixlen - 2 |
| |
| if subnetSize is not None: |
| return list(baseNetwork.subnets(new_prefix=subnetSize)) |
| |
| trySubnetSize = baseNetwork.prefixlen + 1 |
| while trySubnetSize <= maxPrefixLength and \ |
| len(list(baseNetwork.subnets(new_prefix=trySubnetSize))) < numRoutes: |
| trySubnetSize += 1 |
| |
| if trySubnetSize > maxPrefixLength: |
| raise Exception("Can't get enough routes from input parameters") |
| |
| return list(baseNetwork.subnets(new_prefix=trySubnetSize))[:numRoutes] |
| |
| class RoutingCli( CLI ): |
| |
| """CLI command that can bring a host up or down. Useful for simulating router failure.""" |
| |
| def do_host( self, line ): |
| args = line.split() |
| if len(args) != 2: |
| error( 'invalid number of args: host <host name> {up, down}\n' ) |
| return |
| |
| host = args[ 0 ] |
| command = args[ 1 ] |
| if host not in self.mn or self.mn.get( host ) not in self.mn.hosts: |
| error( 'invalid host: %s\n' % args[ 1 ] ) |
| else: |
| if command == 'up': |
| op = 'up' |
| elif command == 'down': |
| op = 'down' |
| else: |
| error( 'invalid command: host <host name> {up, down}\n' ) |
| return |
| |
| for intf in self.mn.get( host ).intfList( ): |
| intf.link.intf1.ifconfig( op ) |
| intf.link.intf2.ifconfig( op ) |