blob: 4befc706c92222c72b4b7ee7f874745ddb65c4bc [file] [log] [blame]
Kunihiro Ishigurod37c9ca2014-12-31 16:05:40 +09001#
2# Sample configuration for onos-app-fwd.
Pavlin Radoslavov71594942015-03-03 15:21:30 -08003#
Dusan Pajin0d1d48f2015-02-20 16:05:11 +01004
5#
6# Reactive flows default matching is InPort, Src MAC, Dst MAC and EtherType fields
Kunihiro Ishigurod37c9ca2014-12-31 16:05:40 +09007#
8
9#
10# Enable packet-out only forwarding.
11# This flag affects to both IPv4 and IPv6.
12#
13# packetOutOnly = true
14
15#
Dusan Pajin0d1d48f2015-02-20 16:05:11 +010016# Enable forwarding of the first packet by using OFPP_TABLE port in the
17# PacketOut message instead of sending it directly to the switch port
18#
19# packetOutOfppTable = true
20
21#
22# Timeout of reactively installed flows (in seconds).
23# Default is 10 sec
24#
25# flowTimeout = 10
26
27#
28# Priority of reactively installed flows
29#
30# flowPriority = 10
31
32#
Kunihiro Ishigurod37c9ca2014-12-31 16:05:40 +090033# Enable IPv6 forwarding.
34#
35# ipv6Forwarding = true
Dusan Pajin0d1d48f2015-02-20 16:05:11 +010036
37#
38# Flows matching destination MAC only - as legacy L2 switches
39# - This option overrides all other options below
40#
41# matchDstMacOnly = true
42
43#
44# Matching of VLAN ID in Ethernet header
45#
46# matchVlanId = true
47
48#
49# Matching of IPv4 addresses and Protocol field
50# - must be enabled to match IPv4 DSCP, TCP/UDP ports and ICMP type/code
51#
52# matchIpv4Address = true
53
54#
55# Matching of IPv4 DSCP and ECN fields
56#
57# matchIpv4Dscp = true
58
59#
60# Matching of IPv6 addresses and Next-Header field
61# - must be enabled to match IPv6 Flow Label, TCP/UDP ports and ICMP type/code
62#
63# matchIpv6Address = true
64
65#
66# Matching of IPv6 Flow Label
67#
68# matchIpv6FlowLabel = true
69
70#
71# Matching of TCP/UDP ports for IPv4 and IPv6
72#
73# matchTcpUdpPorts = true
74
75#
76# Matching of ICMP Type and Code fields for IPv4 and IPv6
77#
78# matchIcmpFields = true
79