| # coding=utf-8 |
| """ |
| Copyright 2019-present Open Networking Foundation |
| |
| Licensed under the Apache License, Version 2.0 (the "License"); |
| you may not use this file except in compliance with the License. |
| You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| """ |
| import multiprocessing |
| import os |
| |
| import json |
| import random |
| import re |
| import socket |
| import sys |
| import threading |
| import time |
| import urllib2 |
| from contextlib import closing |
| from mininet.log import info, warn, debug |
| from mininet.node import Switch, Host |
| |
| SIMPLE_SWITCH_GRPC = 'simple_switch_grpc' |
| PKT_BYTES_TO_DUMP = 80 |
| VALGRIND_PREFIX = 'valgrind --leak-check=yes' |
| SWITCH_START_TIMEOUT = 5 # seconds |
| BMV2_LOG_LINES = 5 |
| BMV2_DEFAULT_DEVICE_ID = 1 |
| DEFAULT_PIPECONF = "org.onosproject.pipelines.basic" |
| |
| # Stratum paths relative to stratum repo root |
| STRATUM_BMV2 = 'stratum_bmv2' |
| STRATUM_BINARY = '/bazel-bin/stratum/hal/bin/bmv2/' + STRATUM_BMV2 |
| STRATUM_INIT_PIPELINE = '/stratum/hal/bin/bmv2/dummy.json' |
| |
| |
| def getStratumRoot(): |
| if 'STRATUM_ROOT' not in os.environ: |
| raise Exception("Env variable STRATUM_ROOT not set") |
| return os.environ['STRATUM_ROOT'] |
| |
| |
| def parseBoolean(value): |
| if value in ['1', 1, 'true', 'True']: |
| return True |
| else: |
| return False |
| |
| |
| def pickUnusedPort(): |
| s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) |
| s.bind(('localhost', 0)) |
| addr, port = s.getsockname() |
| s.close() |
| return port |
| |
| |
| def writeToFile(path, value): |
| with open(path, "w") as f: |
| f.write(str(value)) |
| |
| |
| def watchDog(sw): |
| try: |
| writeToFile(sw.keepaliveFile, |
| "Remove this file to terminate %s" % sw.name) |
| while True: |
| if ONOSBmv2Switch.mininet_exception == 1 \ |
| or not os.path.isfile(sw.keepaliveFile): |
| sw.killBmv2(log=False) |
| return |
| if sw.stopped: |
| return |
| with closing(socket.socket(socket.AF_INET, socket.SOCK_STREAM)) as s: |
| if s.connect_ex(('127.0.0.1', sw.grpcPort)) == 0: |
| time.sleep(1) |
| else: |
| warn("\n*** WARN: switch %s died ☠️ \n" % sw.name) |
| sw.printBmv2Log() |
| print ("-" * 80) + "\n" |
| return |
| except Exception as e: |
| warn("*** ERROR: " + e.message) |
| sw.killBmv2(log=True) |
| |
| |
| class ONOSHost(Host): |
| def __init__(self, name, inNamespace=True, **params): |
| Host.__init__(self, name, inNamespace=inNamespace, **params) |
| |
| def config(self, **params): |
| r = super(Host, self).config(**params) |
| for off in ["rx", "tx", "sg"]: |
| cmd = "/sbin/ethtool --offload %s %s off" \ |
| % (self.defaultIntf(), off) |
| self.cmd(cmd) |
| # disable IPv6 |
| self.cmd("sysctl -w net.ipv6.conf.all.disable_ipv6=1") |
| self.cmd("sysctl -w net.ipv6.conf.default.disable_ipv6=1") |
| self.cmd("sysctl -w net.ipv6.conf.lo.disable_ipv6=1") |
| return r |
| |
| |
| class ONOSBmv2Switch(Switch): |
| """BMv2 software switch with gRPC server""" |
| # Shared value used to notify to all instances of this class that a Mininet |
| # exception occurred. Mininet exception handling doesn't call the stop() |
| # method, so the mn process would hang after clean-up since Bmv2 would still |
| # be running. |
| mininet_exception = multiprocessing.Value('i', 0) |
| |
| def __init__(self, name, json=None, debugger=False, loglevel="warn", |
| elogger=False, grpcport=None, cpuport=255, notifications=False, |
| thriftport=None, netcfg=True, dryrun=False, |
| pipeconf=DEFAULT_PIPECONF, pktdump=False, valgrind=False, |
| gnmi=False, portcfg=True, onosdevid=None, stratum=False, |
| **kwargs): |
| Switch.__init__(self, name, **kwargs) |
| self.grpcPort = grpcport |
| self.thriftPort = thriftport |
| self.cpuPort = cpuport |
| self.json = json |
| self.useStratum = parseBoolean(stratum) |
| self.debugger = parseBoolean(debugger) |
| self.notifications = parseBoolean(notifications) |
| self.loglevel = loglevel |
| # Important: Mininet removes all /tmp/*.log files in case of exceptions. |
| # We want to be able to see the bmv2 log if anything goes wrong, hence |
| # avoid the .log extension. |
| self.logfile = '/tmp/bmv2-%s-log' % self.name |
| self.elogger = parseBoolean(elogger) |
| self.pktdump = parseBoolean(pktdump) |
| self.netcfg = parseBoolean(netcfg) |
| self.dryrun = parseBoolean(dryrun) |
| self.valgrind = parseBoolean(valgrind) |
| self.netcfgfile = '/tmp/bmv2-%s-netcfg.json' % self.name |
| self.chassisConfigFile = '/tmp/bmv2-%s-chassis-config.txt' % self.name |
| self.pipeconfId = pipeconf |
| self.injectPorts = parseBoolean(portcfg) |
| self.withGnmi = parseBoolean(gnmi) |
| self.longitude = kwargs['longitude'] if 'longitude' in kwargs else None |
| self.latitude = kwargs['latitude'] if 'latitude' in kwargs else None |
| if onosdevid is not None and len(onosdevid) > 0: |
| self.onosDeviceId = onosdevid |
| else: |
| self.onosDeviceId = "device:bmv2:%s" % self.name |
| self.p4DeviceId = BMV2_DEFAULT_DEVICE_ID |
| self.logfd = None |
| self.bmv2popen = None |
| self.stopped = True |
| # In case of exceptions, mininet removes *.out files from /tmp. We use |
| # this as a signal to terminate the switch instance (if active). |
| self.keepaliveFile = '/tmp/bmv2-%s-watchdog.out' % self.name |
| self.targetName = STRATUM_BMV2 if self.useStratum else SIMPLE_SWITCH_GRPC |
| |
| # Remove files from previous executions |
| self.cleanupTmpFiles() |
| |
| def getSourceIp(self, dstIP): |
| """ |
| Queries the Linux routing table to get the source IP that can talk with |
| dstIP, and vice versa. |
| """ |
| ipRouteOut = self.cmd('ip route get %s' % dstIP) |
| r = re.search(r"src (\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})", ipRouteOut) |
| return r.group(1) if r else None |
| |
| def getDeviceConfig(self, srcIP): |
| |
| basicCfg = { |
| "managementAddress": "grpc://%s:%d?device_id=%d" % ( |
| srcIP, self.grpcPort, self.p4DeviceId), |
| "driver": "stratum-bmv2" if self.useStratum else "bmv2", |
| "pipeconf": self.pipeconfId |
| } |
| |
| if self.longitude and self.latitude: |
| basicCfg["longitude"] = self.longitude |
| basicCfg["latitude"] = self.latitude |
| |
| cfgData = { |
| "basic": basicCfg |
| } |
| |
| if not self.useStratum and self.injectPorts: |
| portData = {} |
| portId = 1 |
| for intfName in self.intfNames(): |
| if intfName == 'lo': |
| continue |
| portData[str(portId)] = { |
| "number": portId, |
| "name": intfName, |
| "enabled": True, |
| "removed": False, |
| "type": "copper", |
| "speed": 10000 |
| } |
| portId += 1 |
| |
| cfgData['ports'] = portData |
| |
| return cfgData |
| |
| def chassisConfig(self): |
| config = """description: "BMv2 simple_switch {name}" |
| chassis {{ |
| platform: PLT_P4_SOFT_SWITCH |
| name: "{name}" |
| }} |
| nodes {{ |
| id: {nodeId} |
| name: "{name} node {nodeId}" |
| slot: 1 |
| index: 1 |
| }}\n""".format(name=self.name, nodeId=self.p4DeviceId) |
| |
| intfNumber = 1 |
| for intfName in self.intfNames(): |
| if intfName == 'lo': |
| continue |
| config = config + """singleton_ports {{ |
| id: {intfNumber} |
| name: "{intfName}" |
| slot: 1 |
| port: {intfNumber} |
| channel: 1 |
| speed_bps: 10000000000 |
| config_params {{ |
| admin_state: ADMIN_STATE_ENABLED |
| }} |
| node: {nodeId} |
| }}\n""".format(intfName=intfName, intfNumber=intfNumber, |
| nodeId=self.p4DeviceId) |
| intfNumber += 1 |
| |
| return config |
| |
| def doOnosNetcfg(self, controllerIP): |
| """ |
| Notifies ONOS about the new device via Netcfg. |
| """ |
| srcIP = self.getSourceIp(controllerIP) |
| if not srcIP: |
| warn("*** WARN: unable to get switch IP address, won't do netcfg\n") |
| return |
| |
| cfgData = { |
| "devices": { |
| self.onosDeviceId: self.getDeviceConfig(srcIP) |
| } |
| } |
| with open(self.netcfgfile, 'w') as fp: |
| json.dump(cfgData, fp, indent=4) |
| |
| if not self.netcfg: |
| # Do not push config to ONOS. |
| return |
| |
| # Build netcfg URL |
| url = 'http://%s:8181/onos/v1/network/configuration/' % controllerIP |
| # Instantiate password manager for HTTP auth |
| pm = urllib2.HTTPPasswordMgrWithDefaultRealm() |
| pm.add_password(None, url, |
| os.environ['ONOS_WEB_USER'], |
| os.environ['ONOS_WEB_PASS']) |
| urllib2.install_opener(urllib2.build_opener( |
| urllib2.HTTPBasicAuthHandler(pm))) |
| # Push config data to controller |
| req = urllib2.Request(url, json.dumps(cfgData), |
| {'Content-Type': 'application/json'}) |
| try: |
| f = urllib2.urlopen(req) |
| print f.read() |
| f.close() |
| except urllib2.URLError as e: |
| warn("*** WARN: unable to push config to ONOS (%s)\n" % e.reason) |
| |
| def start(self, controllers): |
| |
| if not self.stopped: |
| warn("*** %s is already running!\n" % self.name) |
| return |
| |
| # Remove files from previous executions (if we are restarting) |
| self.cleanupTmpFiles() |
| |
| if self.grpcPort is None: |
| self.grpcPort = pickUnusedPort() |
| writeToFile("/tmp/bmv2-%s-grpc-port" % self.name, self.grpcPort) |
| |
| if self.useStratum: |
| config_dir = "/tmp/bmv2-%s-stratum" % self.name |
| os.mkdir(config_dir) |
| with open(self.chassisConfigFile, 'w') as fp: |
| fp.write(self.chassisConfig()) |
| cmdString = self.getStratumCmdString(config_dir) |
| else: |
| if self.thriftPort is None: |
| self.thriftPort = pickUnusedPort() |
| writeToFile("/tmp/bmv2-%s-thrift-port" % self.name, self.thriftPort) |
| cmdString = self.getBmv2CmdString() |
| |
| if self.dryrun: |
| info("\n*** DRY RUN (not executing %s)\n" % self.targetName) |
| |
| debug("\n%s\n" % cmdString) |
| |
| try: |
| if not self.dryrun: |
| # Start the switch |
| self.stopped = False |
| self.logfd = open(self.logfile, "w") |
| self.bmv2popen = self.popen(cmdString, |
| stdout=self.logfd, |
| stderr=self.logfd) |
| self.waitBmv2Start() |
| # We want to be notified if BMv2/Stratum dies... |
| threading.Thread(target=watchDog, args=[self]).start() |
| |
| self.doOnosNetcfg(self.controllerIp(controllers)) |
| except Exception: |
| ONOSBmv2Switch.mininet_exception = 1 |
| self.killBmv2() |
| self.printBmv2Log() |
| raise |
| |
| def getBmv2CmdString(self): |
| bmv2Args = [SIMPLE_SWITCH_GRPC] + self.bmv2Args() |
| if self.valgrind: |
| bmv2Args = VALGRIND_PREFIX.split() + bmv2Args |
| return " ".join(bmv2Args) |
| |
| def getStratumCmdString(self, config_dir): |
| stratumRoot = getStratumRoot() |
| args = [ |
| stratumRoot + STRATUM_BINARY, |
| '-device_id=%d' % self.p4DeviceId, |
| '-chassis_config_file=%s' % self.chassisConfigFile, |
| '-forwarding_pipeline_configs_file=%s/config.txt' % config_dir, |
| '-persistent_config_dir=' + config_dir, |
| '-initial_pipeline=' + stratumRoot + STRATUM_INIT_PIPELINE, |
| '-cpu_port=%s' % self.cpuPort, |
| '-external_hercules_urls=0.0.0.0:%d' % self.grpcPort, |
| '-max_num_controllers_per_node=10' |
| ] |
| return " ".join(args) |
| |
| def bmv2Args(self): |
| args = ['--device-id %s' % str(self.p4DeviceId)] |
| for port, intf in self.intfs.items(): |
| if not intf.IP(): |
| args.append('-i %d@%s' % (port, intf.name)) |
| args.append('--thrift-port %s' % self.thriftPort) |
| if self.notifications: |
| ntfaddr = 'ipc:///tmp/bmv2-%s-notifications.ipc' % self.name |
| args.append('--notifications-addr %s' % ntfaddr) |
| if self.elogger: |
| nanologaddr = 'ipc:///tmp/bmv2-%s-nanolog.ipc' % self.name |
| args.append('--nanolog %s' % nanologaddr) |
| if self.debugger: |
| dbgaddr = 'ipc:///tmp/bmv2-%s-debug.ipc' % self.name |
| args.append('--debugger-addr %s' % dbgaddr) |
| args.append('--log-console') |
| if self.pktdump: |
| args.append('--pcap --dump-packet-data %s' % PKT_BYTES_TO_DUMP) |
| args.append('-L%s' % self.loglevel) |
| if not self.json: |
| args.append('--no-p4') |
| else: |
| args.append(self.json) |
| # gRPC target-specific options |
| args.append('--') |
| args.append('--cpu-port %s' % self.cpuPort) |
| args.append('--grpc-server-addr 0.0.0.0:%s' % self.grpcPort) |
| return args |
| |
| def waitBmv2Start(self): |
| # Wait for switch to open gRPC port, before sending ONOS the netcfg. |
| # Include time-out just in case something hangs. |
| sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) |
| endtime = time.time() + SWITCH_START_TIMEOUT |
| while True: |
| result = sock.connect_ex(('127.0.0.1', self.grpcPort)) |
| if result == 0: |
| # No new line |
| sys.stdout.write("⚡️ %s @ %d" % (self.targetName, self.bmv2popen.pid)) |
| sys.stdout.flush() |
| # The port is open. Let's go! (Close socket first) |
| sock.close() |
| break |
| # Port is not open yet. If there is time, we wait a bit. |
| if endtime > time.time(): |
| sys.stdout.write('.') |
| sys.stdout.flush() |
| time.sleep(0.05) |
| else: |
| # Time's up. |
| raise Exception("Switch did not start before timeout") |
| |
| def printBmv2Log(self): |
| if os.path.isfile(self.logfile): |
| print "-" * 80 |
| print "%s log (from %s):" % (self.name, self.logfile) |
| with open(self.logfile, 'r') as f: |
| lines = f.readlines() |
| if len(lines) > BMV2_LOG_LINES: |
| print "..." |
| for line in lines[-BMV2_LOG_LINES:]: |
| print line.rstrip() |
| |
| @staticmethod |
| def controllerIp(controllers): |
| try: |
| # onos.py |
| clist = controllers[0].nodes() |
| except AttributeError: |
| clist = controllers |
| assert len(clist) > 0 |
| return random.choice(clist).IP() |
| |
| def killBmv2(self, log=False): |
| self.stopped = True |
| if self.bmv2popen is not None: |
| self.bmv2popen.terminate() |
| self.bmv2popen.wait() |
| self.bmv2popen = None |
| if self.logfd is not None: |
| if log: |
| self.logfd.write("*** PROCESS TERMINATED BY MININET ***\n") |
| self.logfd.close() |
| self.logfd = None |
| |
| def cleanupTmpFiles(self): |
| self.cmd("rm -rf /tmp/bmv2-%s-*" % self.name) |
| |
| def stop(self, deleteIntfs=True): |
| """Terminate switch.""" |
| self.killBmv2(log=True) |
| Switch.stop(self, deleteIntfs) |
| |
| |
| class ONOSStratumSwitch(ONOSBmv2Switch): |
| def __init__(self, name, **kwargs): |
| kwargs["stratum"] = True |
| super(ONOSStratumSwitch, self).__init__(name, **kwargs) |
| |
| |
| # Exports for bin/mn |
| switches = { |
| 'onosbmv2': ONOSBmv2Switch, |
| 'stratum': ONOSStratumSwitch, |
| } |
| hosts = {'onoshost': ONOSHost} |