| /* |
| * Copyright 2017-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| package org.onosproject.drivers.microsemi.yang.impl; |
| |
| import org.onosproject.drivers.microsemi.yang.MseaCfmNetconfService; |
| import org.onosproject.incubator.net.l2monitoring.cfm.identifier.MaIdShort; |
| import org.onosproject.incubator.net.l2monitoring.cfm.identifier.MdId; |
| import org.onosproject.incubator.net.l2monitoring.cfm.identifier.MepId; |
| import org.onosproject.incubator.net.l2monitoring.cfm.service.CfmConfigException; |
| import org.onosproject.incubator.net.l2monitoring.soam.SoamId; |
| import org.onosproject.netconf.DatastoreId; |
| import org.onosproject.netconf.NetconfException; |
| import org.onosproject.netconf.NetconfSession; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.MseaCfm; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.MseaCfmOpParam; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.DefaultMefCfm; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.abortloopback.AbortLoopbackInput; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.mefcfm.MaintenanceDomain; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.mefcfm.maintenancedomain.MaintenanceAssociation; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.mefcfm.maintenancedomain.maintenanceassociation.MaintenanceAssociationEndPoint; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.transmitlinktrace.TransmitLinktraceInput; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.transmitlinktrace.TransmitLinktraceOutput; |
| import org.onosproject.yang.gen.v1.mseacfm.rev20160229.mseacfm.transmitloopback.TransmitLoopbackInput; |
| import org.onosproject.yang.gen.v1.mseasoampm.rev20160229.mseasoampm.mefcfm.maintenancedomain.maintenanceassociation.maintenanceassociationendpoint.AugmentedMseaCfmMaintenanceAssociationEndPoint; |
| import org.onosproject.yang.gen.v1.mseasoampm.rev20160229.mseasoampm.mefcfm.maintenancedomain.maintenanceassociation.maintenanceassociationendpoint.DefaultAugmentedMseaCfmMaintenanceAssociationEndPoint; |
| import org.onosproject.yang.gen.v1.mseasoampm.rev20160229.mseasoampm.mefcfm.maintenancedomain.maintenanceassociation.maintenanceassociationendpoint.augmentedmseacfmmaintenanceassociationendpoint.delaymeasurements.DelayMeasurement; |
| import org.onosproject.yang.gen.v1.mseatypes.rev20160229.mseatypes.MepIdType; |
| import org.onosproject.yang.model.DefaultModelObjectData; |
| import org.onosproject.yang.model.ModelConverter; |
| import org.onosproject.yang.model.ModelObject; |
| import org.onosproject.yang.model.ModelObjectData; |
| import org.onosproject.yang.model.ResourceId; |
| import org.onosproject.yang.runtime.AnnotatedNodeInfo; |
| import org.onosproject.yang.runtime.CompositeData; |
| import org.onosproject.yang.runtime.DefaultAnnotatedNodeInfo; |
| import org.onosproject.yang.runtime.DefaultAnnotation; |
| import org.onosproject.yang.runtime.DefaultCompositeStream; |
| import org.osgi.service.component.annotations.Activate; |
| import org.osgi.service.component.annotations.Component; |
| import org.osgi.service.component.annotations.Deactivate; |
| |
| import java.io.ByteArrayInputStream; |
| import java.util.ArrayList; |
| import java.util.Optional; |
| import java.util.regex.Pattern; |
| |
| /** |
| * Implementation of the MseaCfmServiceNetconf YANG model service. |
| */ |
| @Component(immediate = true, service = MseaCfmNetconfService.class) |
| public class MseaCfmManager extends AbstractYangServiceImpl |
| implements MseaCfmNetconfService { |
| |
| private static final String MSEA_CFM = "org.onosproject.drivers.microsemi.yang.mseacfmservice"; |
| |
| private static final String MSEA_CFM_NS = "http://www.microsemi.com/microsemi-edge-assure/msea-cfm"; |
| private static final String MSEA_CFM_PM_NS = "http://www.microsemi.com/microsemi-edge-assure/msea-soam-pm"; |
| |
| //FIXME Remove when the issue with Null bits on onos-yang-tools is sorted |
| @Deprecated |
| protected static final Pattern REGEX_EMPTY_ACTIVE_DEFECTS = |
| Pattern.compile("(<active-defects)[ ]?(/>)", Pattern.DOTALL); |
| //FIXME Remove when the issue with Null bits on onos-yang-tools is sorted |
| @Deprecated |
| protected static final Pattern REGEX_EMPTY_LAST_DEFECT_SENT = |
| Pattern.compile("(<msea-soam-fm:last-defect-sent)[ ]?(/>)", Pattern.DOTALL); |
| private static final String MEF_CFM = "mef-cfm"; |
| private static final String MAINTENANCE_DOMAIN = "maintenance-domain"; |
| public static final String ID = "id"; |
| private static final String MAINTENANCE_ASSOCIATION = "maintenance-association"; |
| private static final String TRANSMIT_LOOPBACK = "transmit-loopback"; |
| private static final String ABORT_LOOPBACK = "abort-loopback"; |
| private static final String MAINTENANCE_ASSOCIATION_END_POINT = "maintenance-association-end-point"; |
| private static final String MEP_ID = "mep-id"; |
| private static final String DELAY_MEASUREMENTS = "delay-measurements"; |
| private static final String DELAY_MEASUREMENT = "delay-measurement"; |
| private static final String DM_ID = "dm-id"; |
| private static final String MEP_IDENTIFIER = "mep-identifier"; |
| private static final String REMOTE_MEPS = "remote-meps"; |
| |
| @Activate |
| public void activate() { |
| super.activate(); |
| appId = coreService.registerApplication(MSEA_CFM); |
| log.info("MseaCfmService Started"); |
| } |
| |
| @Deactivate |
| public void deactivate() { |
| super.deactivate(); |
| log.info("MseaCfmService Stopped"); |
| } |
| |
| @Override |
| public MseaCfm getMepEssentials(MdId mdId, MaIdShort maId, MepId mepId, |
| NetconfSession session) throws NetconfException { |
| if (session == null) { |
| throw new NetconfException("Session is null when calling getMepEssentials()"); |
| } |
| |
| String xmlQueryStr = buildMepEssentialsQueryString(mdId, maId, mepId); |
| log.debug("Sending <get> for MEP essentials" + |
| " query on NETCONF session " + session.getSessionId() + |
| ":\n" + xmlQueryStr); |
| |
| String xmlResult = session.get(xmlQueryStr, null); |
| xmlResult = removeRpcReplyData(xmlResult); |
| DefaultCompositeStream resultDcs = new DefaultCompositeStream( |
| null, new ByteArrayInputStream(xmlResult.getBytes())); |
| CompositeData compositeData = xSer.decode(resultDcs, yCtx); |
| |
| ModelObjectData mod = ((ModelConverter) yangModelRegistry).createModel( |
| compositeData.resourceData()); |
| |
| MseaCfmOpParam mseaCfm = new MseaCfmOpParam(); |
| for (ModelObject mo:mod.modelObjects()) { |
| if (mo instanceof DefaultMefCfm) { |
| mseaCfm.mefCfm((DefaultMefCfm) mo); |
| } |
| } |
| return mseaCfm; |
| } |
| |
| @Override |
| public MseaCfm getMepFull(MdId mdId, MaIdShort maId, MepId mepId, |
| NetconfSession session) throws NetconfException { |
| if (session == null) { |
| throw new NetconfException("Session is null when calling getMepFull()"); |
| } |
| |
| String xmlQueryStr = buildMepFullQueryString(mdId, maId, mepId); |
| log.debug("Sending <get> for full MEP" + |
| " query on NETCONF session " + session.getSessionId() + |
| ":\n" + xmlQueryStr); |
| |
| String xmlResult = session.get(xmlQueryStr, null); |
| xmlResult = removeRpcReplyData(xmlResult); |
| xmlResult = removeEmptyActiveDefects(xmlResult); |
| DefaultCompositeStream resultDcs = new DefaultCompositeStream( |
| null, new ByteArrayInputStream(xmlResult.getBytes())); |
| CompositeData compositeData = xSer.decode(resultDcs, yCtx); |
| |
| ModelObjectData mod = ((ModelConverter) yangModelRegistry).createModel(compositeData.resourceData()); |
| |
| MseaCfmOpParam mseaCfm = new MseaCfmOpParam(); |
| for (ModelObject mo:mod.modelObjects()) { |
| if (mo instanceof DefaultMefCfm) { |
| mseaCfm.mefCfm((DefaultMefCfm) mo); |
| } |
| } |
| |
| return mseaCfm; |
| } |
| |
| @Override |
| public MseaCfm getMepIds(Optional<MdId> mdIdOptional, Optional<MaIdShort> maIdOptional, |
| NetconfSession session, DatastoreId targetDs) throws NetconfException { |
| |
| ModelObjectData.Builder moQueryBldr = DefaultModelObjectData.builder(); |
| |
| ArrayList<AnnotatedNodeInfo> annotations = new ArrayList<>(); |
| String xmlQueryStr = encodeMoToXmlStr(moQueryBldr.build(), annotations); |
| |
| log.debug("Sending <get> for full MEP" + |
| " query on NETCONF session " + session.getSessionId() + |
| ":\n" + xmlQueryStr); |
| |
| String xmlResult = session.get(xmlQueryStr, null); |
| xmlResult = removeRpcReplyData(xmlResult); |
| xmlResult = removeEmptyActiveDefects(xmlResult); |
| DefaultCompositeStream resultDcs = new DefaultCompositeStream( |
| null, new ByteArrayInputStream(xmlResult.getBytes())); |
| CompositeData compositeData = xSer.decode(resultDcs, yCtx); |
| |
| ModelObjectData mod = ((ModelConverter) yangModelRegistry).createModel(compositeData.resourceData()); |
| |
| MseaCfmOpParam mseaCfm = new MseaCfmOpParam(); |
| for (ModelObject mo:mod.modelObjects()) { |
| if (mo instanceof DefaultMefCfm) { |
| mseaCfm.mefCfm((DefaultMefCfm) mo); |
| } |
| } |
| |
| return mseaCfm; |
| } |
| |
| @Override |
| public MseaCfm getSoamDm(MdId mdName, MaIdShort maName, MepId mepId, |
| SoamId dmId, DmEntryParts parts, NetconfSession session) |
| throws NetconfException { |
| String xmlQueryStr = buildDmQueryString(mdName, maName, mepId, dmId, parts); |
| log.debug("Sending <get> for " + |
| " query on NETCONF session " + session.getSessionId() + |
| ":\n" + xmlQueryStr); |
| |
| String xmlResult = session.get(xmlQueryStr, null); |
| xmlResult = removeRpcReplyData(xmlResult); |
| DefaultCompositeStream resultDcs = new DefaultCompositeStream( |
| null, new ByteArrayInputStream(xmlResult.getBytes())); |
| CompositeData compositeData = xSer.decode(resultDcs, yCtx); |
| |
| ModelObjectData mod = ((ModelConverter) yangModelRegistry).createModel(compositeData.resourceData()); |
| |
| MseaCfmOpParam mseaCfm = new MseaCfmOpParam(); |
| for (ModelObject mo:mod.modelObjects()) { |
| if (mo instanceof DefaultMefCfm) { |
| mseaCfm.mefCfm((DefaultMefCfm) mo); |
| } |
| } |
| |
| return mseaCfm; |
| } |
| |
| @Override |
| public boolean setMseaCfm(MseaCfmOpParam mseaCfm, NetconfSession session, |
| DatastoreId targetDs) throws NetconfException { |
| |
| ModelObjectData moQuery = DefaultModelObjectData.builder() |
| .addModelObject((ModelObject) mseaCfm.mefCfm()).build(); |
| return setNetconfObject(moQuery, session, targetDs, null); |
| } |
| |
| @Override |
| public boolean deleteMseaCfmDm(MseaCfmOpParam mseaCfm, NetconfSession session, |
| DatastoreId targetDs) throws NetconfException, CfmConfigException { |
| |
| if (mseaCfm.mefCfm() == null) { |
| throw new CfmConfigException("mefCfm object must be present before Meps can be added"); |
| } |
| ModelObjectData mseCfmDmList = DefaultModelObjectData.builder() |
| .addModelObject(mseaCfm).build(); |
| |
| ArrayList<AnnotatedNodeInfo> anis = new ArrayList<>(); |
| for (MaintenanceDomain md:mseaCfm.mefCfm().maintenanceDomain()) { |
| if (md.id() == 0) { |
| throw new CfmConfigException("An MD numeric ID must be given"); |
| } |
| for (MaintenanceAssociation ma:md.maintenanceAssociation()) { |
| if (ma.id() == 0) { |
| throw new CfmConfigException("An MA numeric ID must be given"); |
| } |
| for (MaintenanceAssociationEndPoint mep:ma.maintenanceAssociationEndPoint()) { |
| AugmentedMseaCfmMaintenanceAssociationEndPoint mepAugment = |
| mep.augmentation(DefaultAugmentedMseaCfmMaintenanceAssociationEndPoint.class); |
| if (mepAugment != null && mepAugment.delayMeasurements() != null) { |
| for (DelayMeasurement dm:mepAugment.delayMeasurements().delayMeasurement()) { |
| ResourceId.Builder ridBuilder = ResourceId.builder() |
| .addBranchPointSchema("/", null) |
| .addBranchPointSchema(MEF_CFM, MSEA_CFM_NS) |
| .addBranchPointSchema(MAINTENANCE_DOMAIN, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, md.id()) |
| .addBranchPointSchema(MAINTENANCE_ASSOCIATION, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, ma.id()) |
| .addBranchPointSchema(MAINTENANCE_ASSOCIATION_END_POINT, MSEA_CFM_NS) |
| .addKeyLeaf(MEP_ID, MSEA_CFM_NS, mep.mepIdentifier()) |
| .addBranchPointSchema(DELAY_MEASUREMENTS, MSEA_CFM_PM_NS) |
| .addBranchPointSchema(DELAY_MEASUREMENT, MSEA_CFM_PM_NS) |
| .addKeyLeaf(DM_ID, MSEA_CFM_PM_NS, dm.dmId()); |
| AnnotatedNodeInfo ani = DefaultAnnotatedNodeInfo.builder() |
| .resourceId(ridBuilder.build()) |
| .addAnnotation(new DefaultAnnotation(NC_OPERATION, OP_DELETE)) |
| .build(); |
| anis.add(ani); |
| } |
| } |
| } |
| } |
| } |
| |
| return setNetconfObject(mseCfmDmList, session, targetDs, anis); |
| } |
| |
| @Override |
| public boolean deleteMseaMep(MseaCfmOpParam mseaCfm, NetconfSession session, |
| DatastoreId targetDs) throws NetconfException, CfmConfigException { |
| |
| if (mseaCfm.mefCfm() == null) { |
| throw new CfmConfigException("mefCfm object must be present before Meps can be added"); |
| } |
| ModelObjectData mseCfmMepList = DefaultModelObjectData.builder() |
| .addModelObject((ModelObject) mseaCfm.mefCfm()).build(); |
| |
| ArrayList<AnnotatedNodeInfo> anis = new ArrayList<>(); |
| for (MaintenanceDomain md:mseaCfm.mefCfm().maintenanceDomain()) { |
| if (md.id() == 0) { |
| throw new CfmConfigException("An MD numeric ID must be given"); |
| } |
| for (MaintenanceAssociation ma:md.maintenanceAssociation()) { |
| if (ma.id() == 0) { |
| throw new CfmConfigException("An MA numeric ID must be given"); |
| } |
| for (MaintenanceAssociationEndPoint mep:ma.maintenanceAssociationEndPoint()) { |
| ResourceId.Builder ridBuilder = ResourceId.builder() |
| .addBranchPointSchema("/", null) |
| .addBranchPointSchema(MEF_CFM, MSEA_CFM_NS) |
| .addBranchPointSchema(MAINTENANCE_DOMAIN, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, md.id()) |
| .addBranchPointSchema(MAINTENANCE_ASSOCIATION, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, ma.id()) |
| .addBranchPointSchema(MAINTENANCE_ASSOCIATION_END_POINT, MSEA_CFM_NS) |
| .addKeyLeaf(MEP_IDENTIFIER, MSEA_CFM_NS, mep.mepIdentifier().uint16()); |
| AnnotatedNodeInfo ani = DefaultAnnotatedNodeInfo.builder() |
| .resourceId(ridBuilder.build()) |
| .addAnnotation(new DefaultAnnotation(NC_OPERATION, OP_DELETE)) |
| .build(); |
| anis.add(ani); |
| } |
| } |
| } |
| |
| return setNetconfObject(mseCfmMepList, session, targetDs, anis); |
| } |
| |
| @Override |
| public boolean deleteMseaMa(MseaCfmOpParam mseaCfm, NetconfSession session, |
| DatastoreId targetDs) throws NetconfException, CfmConfigException { |
| if (mseaCfm.mefCfm() == null) { |
| throw new CfmConfigException("mefCfm object must be present before Meps can be added"); |
| } |
| |
| ModelObjectData mseCfmMepList = DefaultModelObjectData.builder() |
| .addModelObject((ModelObject) mseaCfm.mefCfm()).build(); |
| ArrayList<AnnotatedNodeInfo> anis = new ArrayList<>(); |
| for (MaintenanceDomain md:mseaCfm.mefCfm().maintenanceDomain()) { |
| if (md.id() == 0) { |
| throw new CfmConfigException("An MD numeric ID must be given"); |
| } |
| for (MaintenanceAssociation ma:md.maintenanceAssociation()) { |
| if (ma.id() == 0) { |
| throw new CfmConfigException("An MA numeric ID must be given"); |
| } |
| ResourceId.Builder ridBuilder = ResourceId.builder() |
| .addBranchPointSchema("/", null) |
| .addBranchPointSchema(MEF_CFM, MSEA_CFM_NS) |
| .addBranchPointSchema(MAINTENANCE_DOMAIN, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, md.id()) |
| .addBranchPointSchema(MAINTENANCE_ASSOCIATION, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, ma.id()); |
| |
| AnnotatedNodeInfo ani = DefaultAnnotatedNodeInfo.builder() |
| .resourceId(ridBuilder.build()) |
| .addAnnotation(new DefaultAnnotation(NC_OPERATION, OP_DELETE)) |
| .build(); |
| anis.add(ani); |
| } |
| } |
| |
| return setNetconfObject(mseCfmMepList, session, targetDs, anis); |
| } |
| |
| @Override |
| public boolean deleteMseaMaRMep(MseaCfmOpParam mseaCfm, NetconfSession session, |
| DatastoreId targetDs) throws NetconfException, CfmConfigException { |
| if (mseaCfm.mefCfm() == null) { |
| throw new CfmConfigException("mefCfm object must be present before Meps can be added"); |
| } |
| |
| ModelObjectData mseCfmMepList = DefaultModelObjectData.builder() |
| .addModelObject((ModelObject) mseaCfm.mefCfm()).build(); |
| ArrayList<AnnotatedNodeInfo> anis = new ArrayList<>(); |
| for (MaintenanceDomain md:mseaCfm.mefCfm().maintenanceDomain()) { |
| if (md.id() == 0) { |
| throw new CfmConfigException("An MD numeric ID must be given"); |
| } |
| for (MaintenanceAssociation ma:md.maintenanceAssociation()) { |
| if (ma.id() == 0) { |
| throw new CfmConfigException("An MA numeric ID must be given"); |
| } |
| for (MepIdType rmep:ma.remoteMeps()) { |
| ResourceId.Builder ridBuilder = ResourceId.builder() |
| .addBranchPointSchema("/", null) |
| .addBranchPointSchema(MEF_CFM, MSEA_CFM_NS) |
| .addBranchPointSchema(MAINTENANCE_DOMAIN, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, md.id()) |
| .addBranchPointSchema(MAINTENANCE_ASSOCIATION, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, ma.id()) |
| .addLeafListBranchPoint(REMOTE_MEPS, MSEA_CFM_NS, |
| rmep.uint16()); |
| AnnotatedNodeInfo ani = DefaultAnnotatedNodeInfo.builder() |
| .resourceId(ridBuilder.build()) |
| .addAnnotation(new DefaultAnnotation(NC_OPERATION, OP_DELETE)) |
| .build(); |
| anis.add(ani); |
| } |
| } |
| } |
| |
| return setNetconfObject(mseCfmMepList, session, targetDs, anis); |
| } |
| |
| |
| @Override |
| public boolean deleteMseaMd(MseaCfmOpParam mseaCfm, NetconfSession session, |
| DatastoreId targetDs) throws NetconfException, CfmConfigException { |
| if (mseaCfm.mefCfm() == null) { |
| throw new CfmConfigException("mefCfm object must be present before Meps can be added"); |
| } |
| ModelObjectData mseCfmMepList = DefaultModelObjectData.builder() |
| .addModelObject((ModelObject) mseaCfm.mefCfm()).build(); |
| |
| ArrayList<AnnotatedNodeInfo> anis = new ArrayList<>(); |
| for (MaintenanceDomain md:mseaCfm.mefCfm().maintenanceDomain()) { |
| if (md.id() == 0) { |
| throw new CfmConfigException("An MD numeric ID must be given"); |
| } |
| ResourceId.Builder ridBuilder = ResourceId.builder() |
| .addBranchPointSchema("/", null) |
| .addBranchPointSchema(MEF_CFM, MSEA_CFM_NS) |
| .addBranchPointSchema(MAINTENANCE_DOMAIN, MSEA_CFM_NS) |
| .addKeyLeaf(ID, MSEA_CFM_NS, md.id()); |
| AnnotatedNodeInfo ani = DefaultAnnotatedNodeInfo.builder() |
| .resourceId(ridBuilder.build()) |
| .addAnnotation(new DefaultAnnotation(NC_OPERATION, OP_DELETE)) |
| .build(); |
| anis.add(ani); |
| } |
| |
| return setNetconfObject(mseCfmMepList, session, targetDs, anis); |
| } |
| |
| /** |
| * Call RPCs on the device through NETCONF. |
| */ |
| @Override |
| public void transmitLoopback(TransmitLoopbackInput inputVar, |
| NetconfSession session) throws NetconfException { |
| |
| ModelObjectData transLoopbackMo = DefaultModelObjectData.builder() |
| .addModelObject((ModelObject) inputVar).build(); |
| |
| customRpcNetconf(transLoopbackMo, |
| TRANSMIT_LOOPBACK, session); |
| } |
| |
| @Override |
| public void abortLoopback(AbortLoopbackInput inputVar, |
| NetconfSession session) throws NetconfException { |
| ModelObjectData abortLoopbackMo = DefaultModelObjectData.builder() |
| .addModelObject((ModelObject) inputVar).build(); |
| |
| customRpcNetconf(abortLoopbackMo, ABORT_LOOPBACK, session); |
| } |
| |
| @Override |
| public TransmitLinktraceOutput transmitLinktrace( |
| TransmitLinktraceInput inputVar, NetconfSession session) |
| throws NetconfException { |
| throw new UnsupportedOperationException("Not yet implemented"); |
| } |
| |
| //FIXME Remove when the fix for null bits with onos-yang-tools |
| // https://gerrit.onosproject.org/#/c/15777/ is available |
| @Deprecated |
| private static String removeEmptyActiveDefects(String rpcReplyXml) throws NetconfException { |
| rpcReplyXml = REGEX_EMPTY_ACTIVE_DEFECTS.matcher(rpcReplyXml).replaceFirst(""); |
| rpcReplyXml = REGEX_EMPTY_LAST_DEFECT_SENT.matcher(rpcReplyXml).replaceFirst(""); |
| |
| return rpcReplyXml; |
| } |
| |
| @Deprecated //Replace this with a ModelObject defintion |
| private String buildMepEssentialsQueryString(MdId mdId, MaIdShort maId, |
| MepId mepId) { |
| StringBuilder rpc = new StringBuilder(); |
| |
| rpc.append("<mef-cfm xmlns=\"http://www.microsemi.com/microsemi-edge-assure/msea-cfm\" "); |
| rpc.append(" xmlns:msea-soam-fm=\"http://www.microsemi.com/microsemi-edge-assure/msea-soam-fm\" "); |
| rpc.append("xmlns:msea-soam-pm=\"http://www.microsemi.com/microsemi-edge-assure/msea-soam-pm\">\n"); |
| rpc.append("<maintenance-domain>\n"); |
| rpc.append("<id/>\n"); |
| rpc.append("<name>"); |
| rpc.append(mdId.mdName()); |
| rpc.append("</name>\n"); |
| rpc.append("<maintenance-association>\n"); |
| rpc.append("<id/>\n"); |
| rpc.append("<name>"); |
| rpc.append(maId.maName()); |
| rpc.append("</name>\n"); |
| rpc.append("<ccm-interval>10ms</ccm-interval>\n"); |
| rpc.append("<remote-meps/>\n"); |
| rpc.append("<component-list/>\n"); |
| rpc.append("<maintenance-association-end-point>\n"); |
| rpc.append("<mep-identifier>"); |
| rpc.append(mepId.id()); |
| rpc.append("</mep-identifier>\n"); |
| rpc.append("<mac-address/>\n"); |
| rpc.append("<remote-mep-database>\n"); |
| rpc.append("<remote-mep>\n"); |
| rpc.append("<remote-mep-id/>\n"); |
| rpc.append("</remote-mep>\n"); |
| rpc.append("</remote-mep-database>\n"); |
| rpc.append("<msea-soam-pm:delay-measurements>\n"); |
| rpc.append("<msea-soam-pm:delay-measurement>\n"); |
| rpc.append("<msea-soam-pm:dm-id/>\n"); |
| rpc.append("</msea-soam-pm:delay-measurement>\n"); |
| rpc.append("</msea-soam-pm:delay-measurements>\n"); |
| rpc.append("<msea-soam-pm:loss-measurements>\n"); |
| rpc.append("<msea-soam-pm:loss-measurement>\n"); |
| rpc.append("<msea-soam-pm:lm-id/>\n"); |
| rpc.append("</msea-soam-pm:loss-measurement>\n"); |
| rpc.append("</msea-soam-pm:loss-measurements>\n"); |
| rpc.append("</maintenance-association-end-point>\n"); |
| rpc.append("</maintenance-association>\n"); |
| rpc.append("</maintenance-domain>\n"); |
| rpc.append("</mef-cfm>"); |
| |
| return rpc.toString(); |
| } |
| |
| @Deprecated //Replace this with a ModelObject defintion |
| private String buildMepFullQueryString(MdId mdId, MaIdShort maId, MepId mepId) { |
| StringBuilder rpc = new StringBuilder(); |
| |
| rpc.append("<mef-cfm xmlns=\"http://www.microsemi.com/microsemi-edge-assure/msea-cfm\" "); |
| rpc.append(" xmlns:msea-soam-fm=\"http://www.microsemi.com/microsemi-edge-assure/msea-soam-fm\" "); |
| rpc.append("xmlns:msea-soam-pm=\"http://www.microsemi.com/microsemi-edge-assure/msea-soam-pm\">\n"); |
| rpc.append("<maintenance-domain>\n"); |
| rpc.append("<id/>\n"); |
| rpc.append("<name>"); |
| rpc.append(mdId.mdName()); |
| rpc.append("</name>\n"); |
| rpc.append("<maintenance-association>\n"); |
| rpc.append("<id/>\n"); |
| rpc.append("<name>"); |
| rpc.append(maId.maName()); |
| rpc.append("</name>\n"); |
| rpc.append("<maintenance-association-end-point>\n"); |
| rpc.append("<mep-identifier>"); |
| rpc.append(mepId.id()); |
| rpc.append("</mep-identifier>\n"); |
| rpc.append("<interface/>\n"); |
| //Direction will always be DOWN for EA1000 |
| rpc.append("<primary-vid/>\n"); |
| rpc.append("<administrative-state/>\n"); |
| rpc.append("<mac-address/>\n"); |
| rpc.append("<ccm-ltm-priority/>\n"); |
| rpc.append("<continuity-check/>\n"); //Container |
| rpc.append("<loopback/>\n"); //Container |
| rpc.append("<linktrace/>\n"); //Container |
| rpc.append("<remote-mep-database/>\n"); //Container |
| rpc.append("<msea-soam-fm:operational-state/>\n"); |
| rpc.append("<msea-soam-fm:connectivity-status/>\n"); |
| rpc.append("<msea-soam-fm:port-status/>\n"); |
| rpc.append("<msea-soam-fm:interface-status/>\n"); |
| rpc.append("<msea-soam-fm:last-defect-sent/>\n"); |
| rpc.append("<msea-soam-fm:rdi-transmit-status/>\n"); |
| rpc.append("</maintenance-association-end-point>\n"); |
| rpc.append("</maintenance-association>\n"); |
| rpc.append("</maintenance-domain>\n"); |
| rpc.append("</mef-cfm>"); |
| |
| return rpc.toString(); |
| } |
| |
| @Deprecated //Replace this with a ModelObject defintion |
| private String buildDmQueryString(MdId mdId, MaIdShort maId, MepId mepId, |
| SoamId dmId, DmEntryParts parts) { |
| StringBuilder rpc = new StringBuilder(); |
| |
| rpc.append("<mef-cfm xmlns=\"http://www.microsemi.com/microsemi-edge-assure/msea-cfm\" "); |
| rpc.append(" xmlns:msea-soam-fm=\"http://www.microsemi.com/microsemi-edge-assure/msea-soam-fm\" "); |
| rpc.append("xmlns:msea-soam-pm=\"http://www.microsemi.com/microsemi-edge-assure/msea-soam-pm\">\n"); |
| rpc.append("<maintenance-domain>\n"); |
| rpc.append("<id/>\n"); |
| rpc.append("<name>"); |
| rpc.append(mdId.mdName()); |
| rpc.append("</name>\n"); |
| rpc.append("<maintenance-association>\n"); |
| rpc.append("<id/>\n"); |
| rpc.append("<name>"); |
| rpc.append(maId.maName()); |
| rpc.append("</name>\n"); |
| rpc.append("<maintenance-association-end-point>\n"); |
| rpc.append("<mep-identifier>"); |
| rpc.append(mepId.id()); |
| rpc.append("</mep-identifier>\n"); |
| if (dmId != null) { |
| rpc.append("<msea-soam-pm:delay-measurements>"); |
| rpc.append("<msea-soam-pm:delay-measurement>\n"); |
| rpc.append("<msea-soam-pm:dm-id>"); |
| rpc.append(dmId.id()); |
| rpc.append("</msea-soam-pm:dm-id>\n"); |
| rpc.append("<msea-soam-pm:mep-id/>"); |
| rpc.append("<msea-soam-pm:mac-address/>"); |
| rpc.append("<msea-soam-pm:administrative-state/>\n"); |
| rpc.append("<msea-soam-pm:measurement-enable/>\n"); |
| rpc.append("<msea-soam-pm:message-period/>\n"); |
| rpc.append("<msea-soam-pm:priority/>\n"); |
| rpc.append("<msea-soam-pm:frame-size/>\n"); |
| rpc.append("<msea-soam-pm:measurement-interval/>\n"); |
| rpc.append("<msea-soam-pm:number-intervals-stored/>\n"); |
| rpc.append("<msea-soam-pm:session-status/>\n"); |
| rpc.append("<msea-soam-pm:frame-delay-two-way/>\n"); |
| rpc.append("<msea-soam-pm:inter-frame-delay-variation-two-way/>\n"); |
| if (parts != null && (parts.equals(DmEntryParts.CURRENT_ONLY) || |
| parts.equals(DmEntryParts.ALL_PARTS))) { |
| rpc.append("<msea-soam-pm:current-stats/>\n"); |
| } |
| if (parts != null && (parts.equals(DmEntryParts.HISTORY_ONLY) || |
| parts.equals(DmEntryParts.ALL_PARTS))) { |
| rpc.append("<msea-soam-pm:history-stats/>\n"); |
| } |
| rpc.append("</msea-soam-pm:delay-measurement>\n"); |
| rpc.append("</msea-soam-pm:delay-measurements>"); |
| } else { |
| rpc.append("<msea-soam-pm:delay-measurements/>"); |
| } |
| rpc.append("</maintenance-association-end-point>\n"); |
| rpc.append("</maintenance-association>\n"); |
| rpc.append("</maintenance-domain>\n"); |
| rpc.append("</mef-cfm>"); |
| |
| return rpc.toString(); |
| } |
| |
| @Deprecated //Replace this with a ModelObject defintion |
| private String buildAbortLoopbackQueryString(Short mdId, Short maId, |
| Short mepId) { |
| StringBuilder rpc = new StringBuilder(); |
| |
| rpc.append("<abort-loopback xmlns=\"http://www.microsemi.com/microsemi-edge-assure/msea-cfm\">"); |
| rpc.append("<maintenance-domain>"); |
| rpc.append(mdId); |
| rpc.append("</maintenance-domain>"); |
| rpc.append("<maintenance-association>"); |
| rpc.append(maId); |
| rpc.append("</maintenance-association>"); |
| rpc.append("<maintenance-association-end-point>"); |
| rpc.append(mepId); |
| rpc.append("</maintenance-association-end-point>"); |
| rpc.append("</abort-loopback>"); |
| |
| return rpc.toString(); |
| } |
| } |