| import os |
| import socket |
| import re |
| import json |
| import threading |
| import urllib2 |
| |
| import time |
| from contextlib import closing |
| |
| from mininet.log import info, warn, error |
| from mininet.node import Switch, Host |
| |
| if 'ONOS_ROOT' not in os.environ: |
| error("ERROR: environment var $ONOS_ROOT not set") |
| exit() |
| |
| SIMPLE_SWITCH_GRPC = 'simple_switch_grpc' |
| ONOS_ROOT = os.environ["ONOS_ROOT"] |
| PKT_BYTES_TO_DUMP = 80 |
| VALGRIND_PREFIX = 'valgrind --leak-check=yes' |
| SWITCH_START_TIMEOUT = 5 # seconds |
| BMV2_LOG_LINES = 5 |
| |
| |
| def parseBoolean(value): |
| if value in ['1', 1, 'true', 'True']: |
| return True |
| else: |
| return False |
| |
| |
| def pickUnusedPort(): |
| s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) |
| s.bind(('localhost', 0)) |
| addr, port = s.getsockname() |
| s.close() |
| return port |
| |
| |
| def writeToFile(path, value): |
| with open(path, "w") as f: |
| f.write(str(value)) |
| |
| |
| def watchDog(sw): |
| while True: |
| if sw.stopped: |
| return |
| with closing(socket.socket(socket.AF_INET, socket.SOCK_STREAM)) as s: |
| if s.connect_ex(('127.0.0.1', sw.grpcPort)) == 0: |
| time.sleep(1) |
| else: |
| warn("\n*** WARN: BMv2 instance %s (%s) died!\n" |
| % (sw.deviceId, sw.name)) |
| sw.printBmv2Log() |
| print ("-" * 80) + "\n" |
| return |
| |
| |
| class ONOSHost(Host): |
| def __init__(self, name, inNamespace=True, **params): |
| Host.__init__(self, name, inNamespace=inNamespace, **params) |
| |
| def config(self, **params): |
| r = super(Host, self).config(**params) |
| for off in ["rx", "tx", "sg"]: |
| cmd = "/sbin/ethtool --offload %s %s off" \ |
| % (self.defaultIntf(), off) |
| self.cmd(cmd) |
| # disable IPv6 |
| self.cmd("sysctl -w net.ipv6.conf.all.disable_ipv6=1") |
| self.cmd("sysctl -w net.ipv6.conf.default.disable_ipv6=1") |
| self.cmd("sysctl -w net.ipv6.conf.lo.disable_ipv6=1") |
| return r |
| |
| |
| class ONOSBmv2Switch(Switch): |
| """BMv2 software switch with gRPC server""" |
| |
| deviceId = 0 |
| |
| def __init__(self, name, json=None, debugger=False, loglevel="warn", |
| elogger=False, grpcport=None, cpuport=255, |
| thriftport=None, netcfg=True, dryrun=False, pipeconf="", |
| pktdump=False, valgrind=False, gnmi=False, |
| portcfg=True, **kwargs): |
| Switch.__init__(self, name, **kwargs) |
| self.grpcPort = pickUnusedPort() if not grpcport else grpcport |
| self.thriftPort = pickUnusedPort() if not thriftport else thriftport |
| if self.dpid: |
| self.deviceId = int(self.dpid, 0 if 'x' in self.dpid else 16) |
| else: |
| self.deviceId = ONOSBmv2Switch.deviceId |
| ONOSBmv2Switch.deviceId += 1 |
| self.cpuPort = cpuport |
| self.json = json |
| self.debugger = parseBoolean(debugger) |
| self.loglevel = loglevel |
| # Important: Mininet removes all /tmp/*.log files in case of exceptions. |
| # We want to be able to see the bmv2 log if anything goes wrong, hence |
| # avoid the .log extension. |
| self.logfile = '/tmp/bmv2-%d-log' % self.deviceId |
| self.elogger = parseBoolean(elogger) |
| self.pktdump = parseBoolean(pktdump) |
| self.netcfg = parseBoolean(netcfg) |
| self.dryrun = parseBoolean(dryrun) |
| self.valgrind = parseBoolean(valgrind) |
| self.netcfgfile = '/tmp/bmv2-%d-netcfg.json' % self.deviceId |
| self.pipeconfId = pipeconf |
| self.injectPorts = parseBoolean(portcfg) |
| self.withGnmi = parseBoolean(gnmi) |
| self.longitude = kwargs['longitude'] if 'longitude' in kwargs else None |
| self.latitude = kwargs['latitude'] if 'latitude' in kwargs else None |
| self.onosDeviceId = "device:bmv2:%d" % self.deviceId |
| self.logfd = None |
| self.bmv2popen = None |
| self.stopped = False |
| |
| # Remove files from previous executions |
| self.cleanupTmpFiles() |
| |
| writeToFile("/tmp/bmv2-%d-grpc-port" % self.deviceId, self.grpcPort) |
| writeToFile("/tmp/bmv2-%d-thrift-port" % self.deviceId, self.thriftPort) |
| |
| def getSourceIp(self, dstIP): |
| """ |
| Queries the Linux routing table to get the source IP that can talk with |
| dstIP, and vice versa. |
| """ |
| ipRouteOut = self.cmd('ip route get %s' % dstIP) |
| r = re.search(r"src (\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})", ipRouteOut) |
| return r.group(1) if r else None |
| |
| def getDeviceConfig(self, srcIP): |
| |
| basicCfg = { |
| "driver": "bmv2" |
| } |
| |
| if self.longitude and self.latitude: |
| basicCfg["longitude"] = self.longitude |
| basicCfg["latitude"] = self.latitude |
| |
| cfgData = { |
| "generalprovider": { |
| "p4runtime": { |
| "ip": srcIP, |
| "port": self.grpcPort, |
| "deviceId": self.deviceId, |
| "deviceKeyId": "p4runtime:%s" % self.onosDeviceId |
| } |
| }, |
| "piPipeconf": { |
| "piPipeconfId": self.pipeconfId |
| }, |
| "basic": basicCfg |
| } |
| |
| if self.withGnmi: |
| cfgData["generalprovider"]["gnmi"] = { |
| "ip": srcIP, |
| "port": self.grpcPort |
| } |
| |
| if self.injectPorts: |
| portData = {} |
| portId = 1 |
| for intfName in self.intfNames(): |
| if intfName == 'lo': |
| continue |
| portData[str(portId)] = { |
| "number": portId, |
| "name": intfName, |
| "enabled": True, |
| "removed": False, |
| "type": "copper", |
| "speed": 10000 |
| } |
| portId += 1 |
| |
| cfgData['ports'] = portData |
| |
| return cfgData |
| |
| def doOnosNetcfg(self, controllerIP): |
| """ |
| Notifies ONOS about the new device via Netcfg. |
| """ |
| srcIP = self.getSourceIp(controllerIP) |
| if not srcIP: |
| warn("*** WARN: unable to get switch IP address, won't do netcfg\n") |
| return |
| |
| cfgData = { |
| "devices": { |
| self.onosDeviceId: self.getDeviceConfig(srcIP) |
| } |
| } |
| with open(self.netcfgfile, 'w') as fp: |
| json.dump(cfgData, fp, indent=4) |
| |
| if not self.netcfg: |
| # Do not push config to ONOS. |
| return |
| |
| # Build netcfg URL |
| url = 'http://%s:8181/onos/v1/network/configuration/' % controllerIP |
| # Instantiate password manager for HTTP auth |
| pm = urllib2.HTTPPasswordMgrWithDefaultRealm() |
| pm.add_password(None, url, |
| os.environ['ONOS_WEB_USER'], |
| os.environ['ONOS_WEB_PASS']) |
| urllib2.install_opener(urllib2.build_opener( |
| urllib2.HTTPBasicAuthHandler(pm))) |
| # Push config data to controller |
| req = urllib2.Request(url, json.dumps(cfgData), |
| {'Content-Type': 'application/json'}) |
| try: |
| f = urllib2.urlopen(req) |
| print f.read() |
| f.close() |
| except urllib2.URLError as e: |
| warn("*** WARN: unable to push config to ONOS (%s)\n" % e.reason) |
| |
| def start(self, controllers): |
| bmv2Args = [SIMPLE_SWITCH_GRPC] + self.grpcTargetArgs() |
| if self.valgrind: |
| bmv2Args = VALGRIND_PREFIX.split() + bmv2Args |
| |
| cmdString = " ".join(bmv2Args) |
| |
| if self.dryrun: |
| info("\n*** DRY RUN (not executing bmv2)") |
| |
| info("\nStarting BMv2 target: %s\n" % cmdString) |
| |
| try: |
| if not self.dryrun: |
| # Start the switch |
| self.logfd = open(self.logfile, "w") |
| self.bmv2popen = self.popen(cmdString, |
| stdout=self.logfd, |
| stderr=self.logfd) |
| self.waitBmv2Start() |
| # We want to be notified if BMv2 dies... |
| threading.Thread(target=watchDog, args=[self]).start() |
| |
| self.doOnosNetcfg(self.controllerIp(controllers)) |
| except Exception as ex: |
| self.killBmv2() |
| self.printBmv2Log() |
| raise ex |
| |
| def grpcTargetArgs(self): |
| args = ['--device-id %s' % str(self.deviceId)] |
| for port, intf in self.intfs.items(): |
| if not intf.IP(): |
| args.append('-i %d@%s' % (port, intf.name)) |
| if self.elogger: |
| nanomsg = 'ipc:///tmp/bmv2-%d-log.ipc' % self.deviceId |
| args.append('--nanolog %s' % nanomsg) |
| if self.debugger: |
| args.append('--debugger') |
| args.append('--log-console') |
| if self.pktdump: |
| args.append('--pcap --dump-packet-data %s' % PKT_BYTES_TO_DUMP) |
| args.append('-L%s' % self.loglevel) |
| args.append('--thrift-port %s' % self.thriftPort) |
| if not self.json: |
| args.append('--no-p4') |
| else: |
| args.append(self.json) |
| # gRPC target-specific options |
| args.append('--') |
| args.append('--cpu-port %s' % self.cpuPort) |
| args.append('--grpc-server-addr 0.0.0.0:%s' % self.grpcPort) |
| return args |
| |
| def waitBmv2Start(self): |
| # Wait for switch to open gRPC port, before sending ONOS the netcfg. |
| # Include time-out just in case something hangs. |
| sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) |
| endtime = time.time() + SWITCH_START_TIMEOUT |
| while True: |
| result = sock.connect_ex(('127.0.0.1', self.grpcPort)) |
| if result == 0: |
| # The port is open. Let's go! (Close socket first) |
| sock.close() |
| break |
| # Port is not open yet. If there is time, we wait a bit. |
| if endtime > time.time(): |
| time.sleep(0.2) |
| else: |
| # Time's up. |
| raise Exception("Switch did not start before timeout") |
| |
| def printBmv2Log(self): |
| if os.path.isfile(self.logfile): |
| print "-" * 80 |
| print "BMv2 %d log (from %s):" % (self.deviceId, self.logfile) |
| with open(self.logfile, 'r') as f: |
| lines = f.readlines() |
| if len(lines) > BMV2_LOG_LINES: |
| print "..." |
| for line in lines[-BMV2_LOG_LINES:]: |
| print line.rstrip() |
| |
| @staticmethod |
| def controllerIp(controllers): |
| try: |
| # onos.py |
| clist = controllers[0].nodes() |
| except AttributeError: |
| clist = controllers |
| assert len(clist) > 0 |
| return clist[0].IP() |
| |
| def killBmv2(self, log=False): |
| if self.bmv2popen is not None: |
| self.bmv2popen.kill() |
| if self.logfd is not None: |
| if log: |
| self.logfd.write("*** PROCESS TERMINATED BY MININET ***\n") |
| self.logfd.close() |
| |
| def cleanupTmpFiles(self): |
| self.cmd("rm -f /tmp/bmv2-%d-*" % self.deviceId) |
| |
| def stop(self, deleteIntfs=True): |
| """Terminate switch.""" |
| self.stopped = True |
| self.killBmv2(log=True) |
| Switch.stop(self, deleteIntfs) |
| |
| |
| # Exports for bin/mn |
| switches = {'onosbmv2': ONOSBmv2Switch} |
| hosts = {'onoshost': ONOSHost} |