| # |
| # Sample configuration for onos-app-fwd. |
| # |
| |
| # |
| # Reactive flows default matching is InPort, Src MAC, Dst MAC and EtherType fields |
| # |
| |
| # |
| # Enable packet-out only forwarding. |
| # This flag affects to both IPv4 and IPv6. |
| # |
| # packetOutOnly = true |
| |
| # |
| # Enable forwarding of the first packet by using OFPP_TABLE port in the |
| # PacketOut message instead of sending it directly to the switch port |
| # |
| # packetOutOfppTable = true |
| |
| # |
| # Timeout of reactively installed flows (in seconds). |
| # Default is 10 sec |
| # |
| # flowTimeout = 10 |
| |
| # |
| # Priority of reactively installed flows |
| # |
| # flowPriority = 10 |
| |
| # |
| # Enable IPv6 forwarding. |
| # |
| # ipv6Forwarding = true |
| |
| # |
| # Flows matching destination MAC only - as legacy L2 switches |
| # - This option overrides all other options below |
| # |
| # matchDstMacOnly = true |
| |
| # |
| # Matching of VLAN ID in Ethernet header |
| # |
| # matchVlanId = true |
| |
| # |
| # Matching of IPv4 addresses and Protocol field |
| # - must be enabled to match IPv4 DSCP, TCP/UDP ports and ICMP type/code |
| # |
| # matchIpv4Address = true |
| |
| # |
| # Matching of IPv4 DSCP and ECN fields |
| # |
| # matchIpv4Dscp = true |
| |
| # |
| # Matching of IPv6 addresses and Next-Header field |
| # - must be enabled to match IPv6 Flow Label, TCP/UDP ports and ICMP type/code |
| # |
| # matchIpv6Address = true |
| |
| # |
| # Matching of IPv6 Flow Label |
| # |
| # matchIpv6FlowLabel = true |
| |
| # |
| # Matching of TCP/UDP ports for IPv4 and IPv6 |
| # |
| # matchTcpUdpPorts = true |
| |
| # |
| # Matching of ICMP Type and Code fields for IPv4 and IPv6 |
| # |
| # matchIcmpFields = true |
| |