| /* |
| * Copyright 2016-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| package org.onosproject.driver.pipeline.ofdpa; |
| |
| import com.google.common.collect.ImmutableList; |
| import com.google.common.collect.ImmutableSet; |
| import org.onlab.packet.EthType; |
| import org.onlab.packet.Ethernet; |
| import org.onlab.packet.IpAddress; |
| import org.onlab.packet.IpPrefix; |
| import org.onlab.packet.MacAddress; |
| import org.onlab.packet.VlanId; |
| import org.onosproject.core.ApplicationId; |
| import org.onosproject.core.GroupId; |
| import org.onosproject.net.ConnectPoint; |
| import org.onosproject.net.DeviceId; |
| import org.onosproject.driver.extensions.OfdpaMatchActsetOutput; |
| import org.onosproject.net.Host; |
| import org.onosproject.net.Port; |
| import org.onosproject.net.PortNumber; |
| import org.onosproject.net.behaviour.NextGroup; |
| import org.onosproject.net.behaviour.PipelinerContext; |
| import org.onosproject.net.flow.DefaultFlowRule; |
| import org.onosproject.net.flow.DefaultTrafficSelector; |
| import org.onosproject.net.flow.DefaultTrafficTreatment; |
| import org.onosproject.net.flow.FlowRule; |
| import org.onosproject.net.flow.FlowRuleOperations; |
| import org.onosproject.net.flow.FlowRuleOperationsContext; |
| import org.onosproject.net.flow.TrafficSelector; |
| import org.onosproject.net.flow.TrafficTreatment; |
| import org.onosproject.net.flow.criteria.Criteria; |
| import org.onosproject.net.flow.criteria.Criterion; |
| import org.onosproject.net.flow.criteria.EthCriterion; |
| import org.onosproject.net.flow.criteria.EthTypeCriterion; |
| import org.onosproject.net.flow.criteria.IPCriterion; |
| import org.onosproject.net.flow.criteria.MplsBosCriterion; |
| import org.onosproject.net.flow.criteria.MplsCriterion; |
| import org.onosproject.net.flow.criteria.PortCriterion; |
| import org.onosproject.net.flow.criteria.VlanIdCriterion; |
| import org.onosproject.net.flow.instructions.Instruction; |
| import org.onosproject.net.flow.instructions.Instructions; |
| import org.onosproject.net.flow.instructions.Instructions.OutputInstruction; |
| import org.onosproject.net.flow.instructions.Instructions.NoActionInstruction; |
| import org.onosproject.net.flow.instructions.L2ModificationInstruction; |
| import org.onosproject.net.flow.instructions.L3ModificationInstruction; |
| import org.onosproject.net.flowobjective.FilteringObjective; |
| import org.onosproject.net.flowobjective.ForwardingObjective; |
| import org.onosproject.net.flowobjective.ObjectiveError; |
| import org.onosproject.net.group.DefaultGroupBucket; |
| import org.onosproject.net.group.DefaultGroupDescription; |
| import org.onosproject.net.group.DefaultGroupKey; |
| import org.onosproject.net.group.Group; |
| import org.onosproject.net.group.GroupBucket; |
| import org.onosproject.net.group.GroupBuckets; |
| import org.onosproject.net.group.GroupDescription; |
| import org.onosproject.net.group.GroupKey; |
| import org.onosproject.net.host.HostService; |
| import org.onosproject.net.packet.PacketPriority; |
| import org.slf4j.Logger; |
| |
| import java.util.ArrayList; |
| import java.util.Collection; |
| import java.util.Collections; |
| import java.util.Deque; |
| import java.util.HashSet; |
| import java.util.List; |
| import java.util.Objects; |
| import java.util.Queue; |
| import java.util.concurrent.ConcurrentLinkedQueue; |
| import java.util.concurrent.Executors; |
| import java.util.concurrent.ScheduledExecutorService; |
| import java.util.concurrent.TimeUnit; |
| import java.util.concurrent.locks.ReentrantLock; |
| import java.util.Optional; |
| |
| import static org.onlab.packet.MacAddress.BROADCAST; |
| import static org.onlab.packet.MacAddress.NONE; |
| import static org.onlab.util.Tools.groupedThreads; |
| import static org.onosproject.driver.pipeline.ofdpa.OfdpaGroupHandlerUtility.*; |
| import static org.onosproject.driver.pipeline.ofdpa.OfdpaPipelineUtility.*; |
| import static org.onosproject.net.flow.criteria.Criterion.Type.VLAN_VID; |
| import static org.slf4j.LoggerFactory.getLogger; |
| |
| /** |
| * Driver for Open vSwitch emulation of the OFDPA pipeline. |
| */ |
| public class OvsOfdpaPipeline extends Ofdpa2Pipeline { |
| |
| private final Logger log = getLogger(getClass()); |
| |
| private static final int EGRESS_VLAN_FLOW_TABLE_IN_INGRESS = 31; |
| private static final int UNICAST_ROUTING_TABLE_1 = 32; |
| /** |
| * Table that determines whether VLAN is popped before punting to controller. |
| * <p> |
| * This is a non-OFDPA table to emulate OFDPA packet in behavior. |
| * VLAN will be popped before punting if the VLAN is internally assigned. |
| */ |
| private static final int PUNT_TABLE = 63; |
| |
| /** |
| * A static indirect group that pop vlan and punt to controller. |
| * <p> |
| * The purpose of using a group instead of immediate action is that this |
| * won't affect another copy on the data plane when write action exists. |
| */ |
| private static final int POP_VLAN_PUNT_GROUP_ID = 0xd0000000; |
| |
| /** |
| * Executor for group checker thread that checks pop vlan punt group. |
| */ |
| private ScheduledExecutorService groupChecker; |
| |
| /** |
| * Queue for passing pop vlan punt group flow rules to the GroupChecker thread. |
| */ |
| private Queue<FlowRule> flowRuleQueue; |
| |
| /** |
| * Lock used in synchronizing driver thread with groupCheckerThread. |
| */ |
| private ReentrantLock groupCheckerLock; |
| |
| @Override |
| protected boolean requireVlanExtensions() { |
| return false; |
| } |
| |
| @Override |
| protected boolean requireEthType() { |
| return false; |
| } |
| |
| @Override |
| protected void initDriverId() { |
| driverId = coreService.registerApplication( |
| "org.onosproject.driver.OvsOfdpaPipeline"); |
| } |
| |
| @Override |
| protected void initGroupHander(PipelinerContext context) { |
| // Terminate internal references |
| // We are terminating the references here |
| // because when the device is offline the apps |
| // are still sending flowobjectives |
| if (groupHandler != null) { |
| groupHandler.terminate(); |
| } |
| groupHandler = new OvsOfdpaGroupHandler(); |
| groupHandler.init(deviceId, context); |
| } |
| |
| @Override |
| public void init(DeviceId deviceId, PipelinerContext context) { |
| // Terminate internal references |
| // We are terminating the references here |
| // because when the device is offline the apps |
| // are still sending flowobjectives |
| if (groupChecker != null) { |
| groupChecker.shutdown(); |
| } |
| // create a new executor at each init and a new empty queue |
| groupChecker = Executors.newSingleThreadScheduledExecutor(groupedThreads("onos/driver", |
| "ovs-ofdpa-%d", log)); |
| if (flowRuleQueue != null) { |
| flowRuleQueue.clear(); |
| } |
| flowRuleQueue = new ConcurrentLinkedQueue<>(); |
| groupCheckerLock = new ReentrantLock(); |
| groupChecker.scheduleAtFixedRate(new PopVlanPuntGroupChecker(), 20, 50, TimeUnit.MILLISECONDS); |
| super.init(deviceId, context); |
| } |
| |
| protected void processFilter(FilteringObjective filteringObjective, |
| boolean install, |
| ApplicationId applicationId) { |
| if (OfdpaPipelineUtility.isDoubleTagged(filteringObjective)) { |
| processDoubleTaggedFilter(filteringObjective, install, applicationId); |
| } else { |
| // If it is not a double-tagged filter, we fall back |
| // to the OFDPA 2.0 pipeline. |
| super.processFilter(filteringObjective, install, applicationId); |
| } |
| } |
| |
| /** |
| * Determines if the forwarding objective will be used for double-tagged packets. |
| * |
| * @param fwd Forwarding objective |
| * @return True if the objective was created for double-tagged packets, false otherwise. |
| */ |
| private boolean isDoubleTagged(ForwardingObjective fwd) { |
| if (fwd.nextId() != null) { |
| NextGroup next = getGroupForNextObjective(fwd.nextId()); |
| if (next != null) { |
| List<Deque<GroupKey>> gkeys = appKryo.deserialize(next.data()); |
| // we only need the top level group's key |
| Group group = groupService.getGroup(deviceId, gkeys.get(0).peekFirst()); |
| if (group != null) { |
| int groupId = group.id().id(); |
| if (((groupId & ~TYPE_MASK) == L3_UNICAST_TYPE) && |
| ((groupId & TYPE_L3UG_DOUBLE_VLAN_MASK) == TYPE_L3UG_DOUBLE_VLAN_MASK)) { |
| return true; |
| } |
| } |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * Configure filtering rules of outer and inner VLAN IDs, and a MAC address. |
| * Filtering happens in three tables (VLAN_TABLE, VLAN_1_TABLE, TMAC_TABLE). |
| * |
| * @param filteringObjective the filtering objective |
| * @param install true to add, false to remove |
| * @param applicationId for application programming this filter |
| */ |
| private void processDoubleTaggedFilter(FilteringObjective filteringObjective, |
| boolean install, |
| ApplicationId applicationId) { |
| PortCriterion portCriterion = null; |
| EthCriterion ethCriterion = null; |
| VlanIdCriterion innervidCriterion = null; |
| VlanIdCriterion outerVidCriterion = null; |
| boolean popVlan = false; |
| TrafficTreatment meta = filteringObjective.meta(); |
| if (!filteringObjective.key().equals(Criteria.dummy()) && |
| filteringObjective.key().type() == Criterion.Type.IN_PORT) { |
| portCriterion = (PortCriterion) filteringObjective.key(); |
| } |
| if (portCriterion == null) { |
| log.warn("No IN_PORT defined in filtering objective from app: {}" + |
| "Failed to program VLAN tables.", applicationId); |
| return; |
| } else { |
| log.debug("Received filtering objective for dev/port: {}/{}", deviceId, |
| portCriterion.port()); |
| } |
| |
| // meta should have only one instruction, popVlan. |
| if (meta != null && meta.allInstructions().size() == 1) { |
| L2ModificationInstruction l2Inst = (L2ModificationInstruction) meta.allInstructions().get(0); |
| if (l2Inst.subtype().equals(L2ModificationInstruction.L2SubType.VLAN_POP)) { |
| popVlan = true; |
| } else { |
| log.warn("Filtering objective can have only VLAN_POP instruction."); |
| return; |
| } |
| } else { |
| log.warn("Filtering objective should have one instruction."); |
| return; |
| } |
| |
| FlowRuleOperations.Builder ops = FlowRuleOperations.builder(); |
| for (Criterion criterion : filteringObjective.conditions()) { |
| switch (criterion.type()) { |
| case ETH_DST: |
| case ETH_DST_MASKED: |
| ethCriterion = (EthCriterion) criterion; |
| break; |
| case VLAN_VID: |
| outerVidCriterion = (VlanIdCriterion) criterion; |
| break; |
| case INNER_VLAN_VID: |
| innervidCriterion = (VlanIdCriterion) criterion; |
| break; |
| default: |
| log.warn("Unsupported filter {}", criterion); |
| fail(filteringObjective, ObjectiveError.UNSUPPORTED); |
| return; |
| } |
| } |
| |
| if (innervidCriterion == null || outerVidCriterion == null) { |
| log.warn("filtering objective should have two vidCriterion."); |
| return; |
| } |
| |
| if (ethCriterion == null || ethCriterion.mac().equals(NONE)) { |
| // NOTE: it is possible that a filtering objective only has vidCriterion |
| log.warn("filtering objective missing dstMac, cannot program TMAC table"); |
| return; |
| } else { |
| MacAddress unicastMac = readEthDstFromTreatment(filteringObjective.meta()); |
| List<List<FlowRule>> allStages = processEthDstFilter(portCriterion, ethCriterion, innervidCriterion, |
| innervidCriterion.vlanId(), unicastMac, |
| applicationId); |
| for (List<FlowRule> flowRules : allStages) { |
| log.trace("Starting a new flow rule stage for TMAC table flow"); |
| ops.newStage(); |
| |
| for (FlowRule flowRule : flowRules) { |
| log.trace("{} flow rules in TMAC table: {} for dev: {}", |
| (install) ? "adding" : "removing", flowRules, deviceId); |
| if (install) { |
| ops = ops.add(flowRule); |
| } else { |
| // NOTE: Only remove TMAC flow when there is no more enabled port within the |
| // same VLAN on this device if TMAC doesn't support matching on in_port. |
| if (matchInPortTmacTable() |
| || (filteringObjective.meta() != null |
| && filteringObjective.meta().clearedDeferred())) { |
| ops = ops.remove(flowRule); |
| } else { |
| log.debug("Abort TMAC flow removal on {}. Some other ports still share this TMAC flow"); |
| } |
| } |
| } |
| } |
| } |
| |
| List<FlowRule> rules; |
| rules = processDoubleVlanIdFilter(portCriterion, innervidCriterion, |
| outerVidCriterion, popVlan, applicationId); |
| for (FlowRule flowRule : rules) { |
| log.trace("{} flow rule in VLAN table: {} for dev: {}", |
| (install) ? "adding" : "removing", flowRule, deviceId); |
| ops = install ? ops.add(flowRule) : ops.remove(flowRule); |
| } |
| |
| // apply filtering flow rules |
| flowRuleService.apply(ops.build(new FlowRuleOperationsContext() { |
| @Override |
| public void onSuccess(FlowRuleOperations ops) { |
| log.debug("Applied {} filtering rules in device {}", |
| ops.stages().get(0).size(), deviceId); |
| pass(filteringObjective); |
| } |
| |
| @Override |
| public void onError(FlowRuleOperations ops) { |
| log.info("Failed to apply all filtering rules in dev {}", deviceId); |
| fail(filteringObjective, ObjectiveError.FLOWINSTALLATIONFAILED); |
| } |
| })); |
| |
| } |
| /** |
| * Internal implementation of processDoubleVlanIdFilter. |
| * |
| * @param portCriterion port on device for which this filter is programmed |
| * @param innerVidCriterion inner vlan |
| * @param outerVidCriterion outer vlan |
| * @param popVlan true if outer vlan header needs to be removed |
| * @param applicationId for application programming this filter |
| * @return flow rules for port-vlan filters |
| */ |
| private List<FlowRule> processDoubleVlanIdFilter(PortCriterion portCriterion, |
| VlanIdCriterion innerVidCriterion, |
| VlanIdCriterion outerVidCriterion, |
| boolean popVlan, |
| ApplicationId applicationId) { |
| List<FlowRule> rules = new ArrayList<>(); |
| TrafficSelector.Builder outerSelector = DefaultTrafficSelector.builder(); |
| TrafficTreatment.Builder outerTreatment = DefaultTrafficTreatment.builder(); |
| TrafficSelector.Builder innerSelector = DefaultTrafficSelector.builder(); |
| TrafficTreatment.Builder innerTreatment = DefaultTrafficTreatment.builder(); |
| |
| VlanId outerVlanId = outerVidCriterion.vlanId(); |
| VlanId innerVlanId = innerVidCriterion.vlanId(); |
| PortNumber portNumber = portCriterion.port(); |
| // Check arguments |
| if (PortNumber.ALL.equals(portNumber) |
| || outerVlanId.equals(VlanId.NONE) |
| || innerVlanId.equals(VlanId.NONE)) { |
| log.warn("Incomplete Filtering Objective. " + |
| "VLAN Table cannot be programmed for {}", deviceId); |
| return ImmutableList.of(); |
| } else { |
| outerSelector.matchInPort(portNumber); |
| innerSelector.matchInPort(portNumber); |
| outerTreatment.transition(VLAN_1_TABLE); |
| innerTreatment.transition(TMAC_TABLE); |
| outerTreatment.writeMetadata(outerVlanId.toShort(), 0xFFF); |
| |
| outerSelector.matchVlanId(outerVlanId); |
| innerSelector.matchVlanId(innerVlanId); |
| //force recompilation |
| //FIXME might be issue due tu /fff mask |
| innerSelector.matchMetadata(outerVlanId.toShort()); |
| |
| if (popVlan) { |
| outerTreatment.popVlan(); |
| } |
| } |
| |
| // NOTE: for double-tagged packets, restore original outer vlan |
| // before sending it to the controller. |
| GroupKey groupKey = popVlanPuntGroupKey(); |
| Group group = groupService.getGroup(deviceId, groupKey); |
| if (group != null) { |
| // push outer vlan and send to controller |
| TrafficSelector.Builder sbuilder = DefaultTrafficSelector.builder() |
| .matchInPort(portNumber) |
| .matchVlanId(innerVlanId); |
| Host host = handler().get(HostService.class).getConnectedHosts(ConnectPoint. |
| deviceConnectPoint(deviceId + "/" + portNumber.toLong())).stream().filter(h -> |
| h.vlan().equals(outerVlanId)).findFirst().orElse(null); |
| EthType vlanType = EthType.EtherType.VLAN.ethType(); |
| if (host != null) { |
| vlanType = host.tpid(); |
| } |
| TrafficTreatment.Builder tbuilder = DefaultTrafficTreatment.builder() |
| .pushVlan(vlanType).setVlanId(outerVlanId).punt(); |
| |
| rules.add(DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(sbuilder.build()) |
| .withTreatment(tbuilder.build()) |
| .withPriority(PacketPriority.CONTROL.priorityValue()) |
| .fromApp(driverId) |
| .makePermanent() |
| .forTable(PUNT_TABLE).build()); |
| } else { |
| log.info("popVlanPuntGroup not found in dev:{}", deviceId); |
| return Collections.emptyList(); |
| } |
| |
| FlowRule outerRule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(outerSelector.build()) |
| .withTreatment(outerTreatment.build()) |
| .withPriority(DEFAULT_PRIORITY) |
| .fromApp(applicationId) |
| .makePermanent() |
| .forTable(VLAN_TABLE) |
| .build(); |
| FlowRule innerRule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(innerSelector.build()) |
| .withTreatment(innerTreatment.build()) |
| .withPriority(DEFAULT_PRIORITY) |
| .fromApp(applicationId) |
| .makePermanent() |
| .forTable(VLAN_1_TABLE) |
| .build(); |
| rules.add(outerRule); |
| rules.add(innerRule); |
| |
| return rules; |
| } |
| |
| /** |
| * In the OF-DPA 2.0 pipeline, egress forwarding objectives go to the |
| * egress tables. |
| * @param fwd the forwarding objective of type 'egress' |
| * @return a collection of flow rules to be sent to the switch. An empty |
| * collection may be returned if there is a problem in processing |
| * the flow rule |
| */ |
| @Override |
| protected Collection<FlowRule> processEgress(ForwardingObjective fwd) { |
| log.debug("Processing egress forwarding objective:{} in dev:{}", |
| fwd, deviceId); |
| |
| List<FlowRule> rules = new ArrayList<>(); |
| |
| // Build selector |
| TrafficSelector.Builder sb = DefaultTrafficSelector.builder(); |
| VlanIdCriterion vlanIdCriterion = (VlanIdCriterion) fwd.selector().getCriterion(Criterion.Type.VLAN_VID); |
| if (vlanIdCriterion == null) { |
| log.error("Egress forwarding objective:{} must include vlanId", fwd.id()); |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return rules; |
| } |
| |
| Optional<Instruction> outInstr = fwd.treatment().allInstructions().stream() |
| .filter(instruction -> instruction instanceof Instructions.OutputInstruction).findFirst(); |
| if (!outInstr.isPresent()) { |
| log.error("Egress forwarding objective:{} must include output port", fwd.id()); |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return rules; |
| } |
| |
| PortNumber portNumber = ((Instructions.OutputInstruction) outInstr.get()).port(); |
| |
| sb.matchVlanId(vlanIdCriterion.vlanId()); |
| OfdpaMatchActsetOutput actsetOutput = new OfdpaMatchActsetOutput(portNumber); |
| sb.extension(actsetOutput, deviceId); |
| |
| // Build a flow rule for Egress VLAN Flow table |
| TrafficTreatment.Builder tb = DefaultTrafficTreatment.builder(); |
| tb.transition(UNICAST_ROUTING_TABLE_1); |
| if (fwd.treatment() != null) { |
| for (Instruction instr : fwd.treatment().allInstructions()) { |
| if (instr instanceof L2ModificationInstruction && |
| ((L2ModificationInstruction) instr).subtype() == |
| L2ModificationInstruction.L2SubType.VLAN_ID) { |
| tb.immediate().add(instr); |
| } |
| if (instr instanceof L2ModificationInstruction && |
| ((L2ModificationInstruction) instr).subtype() == |
| L2ModificationInstruction.L2SubType.VLAN_PUSH) { |
| EthType ethType = ((L2ModificationInstruction.ModVlanHeaderInstruction) instr).ethernetType(); |
| tb.immediate().pushVlan(ethType); |
| } |
| } |
| } |
| |
| FlowRule.Builder ruleBuilder = DefaultFlowRule.builder() |
| .fromApp(fwd.appId()) |
| .withPriority(fwd.priority()) |
| .forDevice(deviceId) |
| .withSelector(sb.build()) |
| .withTreatment(tb.build()) |
| .makePermanent() |
| .forTable(EGRESS_VLAN_FLOW_TABLE_IN_INGRESS); |
| rules.add(ruleBuilder.build()); |
| return rules; |
| } |
| |
| /** |
| * Handles forwarding rules to the IP Unicast Routing. |
| * |
| * @param fwd the forwarding objective |
| * @return A collection of flow rules, or an empty set |
| */ |
| protected Collection<FlowRule> processDoubleTaggedFwd(ForwardingObjective fwd) { |
| // inner for UNICAST_ROUTING_TABLE_1, outer for UNICAST_ROUTING_TABLE |
| TrafficSelector selector = fwd.selector(); |
| TrafficSelector.Builder sBuilder = DefaultTrafficSelector.builder(); |
| TrafficTreatment.Builder innerTtb = DefaultTrafficTreatment.builder(); |
| TrafficTreatment.Builder outerTtb = DefaultTrafficTreatment.builder(); |
| |
| EthTypeCriterion ethType = |
| (EthTypeCriterion) selector.getCriterion(Criterion.Type.ETH_TYPE); |
| |
| if (ethType.ethType().toShort() == Ethernet.TYPE_IPV4) { |
| sBuilder.matchEthType(Ethernet.TYPE_IPV4); |
| sBuilder.matchVlanId(VlanId.ANY); |
| IpPrefix ipv4Dst = ((IPCriterion) selector.getCriterion(Criterion.Type.IPV4_DST)).ip(); |
| if (!ipv4Dst.isMulticast() && ipv4Dst.prefixLength() == 32) { |
| sBuilder.matchIPDst(ipv4Dst); |
| if (fwd.nextId() != null) { |
| NextGroup next = getGroupForNextObjective(fwd.nextId()); |
| if (next != null) { |
| List<Deque<GroupKey>> gkeys = appKryo.deserialize(next.data()); |
| // we only need the top level group's key to point the flow to it |
| Group group = groupService.getGroup(deviceId, gkeys.get(0).peekFirst()); |
| if (group == null) { |
| log.warn("Group with key:{} for next-id:{} not found in dev:{}", |
| gkeys.get(0).peekFirst(), fwd.nextId(), deviceId); |
| fail(fwd, ObjectiveError.GROUPMISSING); |
| return Collections.emptySet(); |
| } |
| outerTtb.immediate().setVlanId(extractDummyVlanIdFromGroupId(group.id().id())); |
| //ACTSET_OUTPUT in OVS will match output action in write_action() set. |
| outerTtb.deferred().setOutput(extractOutputPortFromGroupId(group.id().id())); |
| outerTtb.transition(EGRESS_VLAN_FLOW_TABLE_IN_INGRESS); |
| innerTtb.deferred().group(group.id()); |
| innerTtb.transition(ACL_TABLE); |
| |
| FlowRule.Builder innerRuleBuilder = DefaultFlowRule.builder() |
| .fromApp(fwd.appId()) |
| .withPriority(fwd.priority()) |
| .forDevice(deviceId) |
| .withSelector(sBuilder.build()) |
| .withTreatment(innerTtb.build()) |
| .forTable(UNICAST_ROUTING_TABLE_1); |
| if (fwd.permanent()) { |
| innerRuleBuilder.makePermanent(); |
| } else { |
| innerRuleBuilder.makeTemporary(fwd.timeout()); |
| } |
| Collection<FlowRule> flowRuleCollection = new HashSet<>(); |
| flowRuleCollection.add(innerRuleBuilder.build()); |
| |
| FlowRule.Builder outerRuleBuilder = DefaultFlowRule.builder() |
| .fromApp(fwd.appId()) |
| .withPriority(fwd.priority()) |
| .forDevice(deviceId) |
| .withSelector(sBuilder.build()) |
| .withTreatment(outerTtb.build()) |
| .forTable(UNICAST_ROUTING_TABLE); |
| if (fwd.permanent()) { |
| outerRuleBuilder.makePermanent(); |
| } else { |
| outerRuleBuilder.makeTemporary(fwd.timeout()); |
| } |
| flowRuleCollection.add(innerRuleBuilder.build()); |
| flowRuleCollection.add(outerRuleBuilder.build()); |
| return flowRuleCollection; |
| } else { |
| log.warn("Cannot find group for nextId:{} in dev:{}. Aborting fwd:{}", |
| fwd.nextId(), deviceId, fwd.id()); |
| fail(fwd, ObjectiveError.FLOWINSTALLATIONFAILED); |
| return Collections.emptySet(); |
| } |
| } else { |
| log.warn("NextId is not specified in fwd:{}", fwd.id()); |
| fail(fwd, ObjectiveError.FLOWINSTALLATIONFAILED); |
| return Collections.emptySet(); |
| } |
| } |
| } |
| return Collections.emptySet(); |
| } |
| |
| private static VlanId extractDummyVlanIdFromGroupId(int groupId) { |
| short vlanId = (short) ((groupId & 0x7FF8000) >> 15); |
| return VlanId.vlanId(vlanId); |
| } |
| |
| private static PortNumber extractOutputPortFromGroupId(int groupId) { |
| return PortNumber.portNumber(groupId & 0x7FFF); |
| } |
| |
| /* |
| * Open vSwitch emulation does not require the non OF-standard rules for |
| * matching untagged packets that ofdpa uses. |
| * |
| * (non-Javadoc) |
| * @see org.onosproject.driver.pipeline.OFDPA2Pipeline#processVlanIdFilter |
| */ |
| @Override |
| protected List<List<FlowRule>> processVlanIdFilter(PortCriterion portCriterion, |
| VlanIdCriterion vidCriterion, |
| VlanId assignedVlan, |
| ApplicationId applicationId, |
| boolean install) { |
| List<FlowRule> rules = new ArrayList<>(); |
| TrafficSelector.Builder selector = DefaultTrafficSelector.builder(); |
| TrafficTreatment.Builder treatment = DefaultTrafficTreatment.builder(); |
| selector.matchVlanId(vidCriterion.vlanId()); |
| treatment.transition(TMAC_TABLE); |
| |
| if (vidCriterion.vlanId() == VlanId.NONE) { |
| // untagged packets are assigned vlans |
| treatment.pushVlan().setVlanId(assignedVlan); |
| } else if (!vidCriterion.vlanId().equals(assignedVlan)) { |
| // Rewrite with assigned vlans |
| treatment.setVlanId(assignedVlan); |
| } |
| |
| // ofdpa cannot match on ALL portnumber, so we need to use separate |
| // rules for each port. |
| List<PortNumber> portnums = new ArrayList<>(); |
| if (portCriterion != null) { |
| if (portCriterion.port() == PortNumber.ALL) { |
| for (Port port : deviceService.getPorts(deviceId)) { |
| if (port.number().toLong() > 0 && port.number().toLong() < OFPP_MAX) { |
| portnums.add(port.number()); |
| } |
| } |
| } else { |
| portnums.add(portCriterion.port()); |
| } |
| } |
| |
| for (PortNumber pnum : portnums) { |
| // NOTE: Emulating OFDPA behavior by popping off internal assigned |
| // VLAN before sending to controller |
| if (vidCriterion.vlanId() == VlanId.NONE) { |
| try { |
| groupCheckerLock.lock(); |
| if (flowRuleQueue == null) { |
| // this means that the group has been created |
| // and that groupChecker has destroyed the queue |
| log.debug("Installing punt table rule for untagged port {} and vlan {}.", |
| pnum, assignedVlan); |
| rules.add(buildPuntTableRule(pnum, assignedVlan)); |
| } else { |
| // The VLAN punt group may be held back due to device initial audit. |
| // In that case, we queue all punt table flow until the group has been created. |
| log.debug("popVlanPuntGroup not found in dev:{}, queueing this flow rule.", deviceId); |
| flowRuleQueue.add(buildPuntTableRule(pnum, assignedVlan)); |
| } |
| } finally { |
| groupCheckerLock.unlock(); |
| } |
| } else if (vidCriterion.vlanId() != VlanId.NONE) { |
| // for tagged ports just forward to the controller |
| log.debug("Installing punt rule for tagged port {} and vlan {}.", pnum, vidCriterion.vlanId()); |
| rules.add(buildPuntTableRuleTagged(pnum, vidCriterion.vlanId())); |
| } |
| |
| // create rest of flowrule |
| selector.matchInPort(pnum); |
| FlowRule rule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(selector.build()) |
| .withTreatment(treatment.build()) |
| .withPriority(DEFAULT_PRIORITY) |
| .fromApp(applicationId) |
| .makePermanent() |
| .forTable(VLAN_TABLE).build(); |
| rules.add(rule); |
| } |
| |
| return ImmutableList.of(rules); |
| } |
| |
| /** |
| * Creates punt table entry that matches IN_PORT and VLAN_VID and points to |
| * a group that pop vlan and punt. |
| * |
| * @param portNumber port number |
| * @param assignedVlan internally assigned vlan id |
| * @return punt table flow rule |
| */ |
| private FlowRule buildPuntTableRule(PortNumber portNumber, VlanId assignedVlan) { |
| TrafficSelector.Builder sbuilder = DefaultTrafficSelector.builder() |
| .matchInPort(portNumber) |
| .matchVlanId(assignedVlan); |
| TrafficTreatment.Builder tbuilder = DefaultTrafficTreatment.builder() |
| .group(new GroupId(POP_VLAN_PUNT_GROUP_ID)); |
| |
| return DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(sbuilder.build()) |
| .withTreatment(tbuilder.build()) |
| .withPriority(PacketPriority.CONTROL.priorityValue()) |
| .fromApp(driverId) |
| .makePermanent() |
| .forTable(PUNT_TABLE).build(); |
| } |
| |
| /** |
| * Creates punt table entry that matches IN_PORT and VLAN_VID and forwards |
| * packet to controller tagged. |
| * |
| * @param portNumber port number |
| * @param packetVlan vlan tag of the packet |
| * @return punt table flow rule |
| */ |
| private FlowRule buildPuntTableRuleTagged(PortNumber portNumber, VlanId packetVlan) { |
| TrafficSelector.Builder sbuilder = DefaultTrafficSelector.builder() |
| .matchInPort(portNumber) |
| .matchVlanId(packetVlan); |
| TrafficTreatment.Builder tbuilder = DefaultTrafficTreatment.builder().punt(); |
| |
| return DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(sbuilder.build()) |
| .withTreatment(tbuilder.build()) |
| .withPriority(PacketPriority.CONTROL.priorityValue()) |
| .fromApp(driverId) |
| .makePermanent() |
| .forTable(PUNT_TABLE).build(); |
| } |
| |
| @Override |
| protected List<List<FlowRule>> processEthDstFilter(PortCriterion portCriterion, |
| EthCriterion ethCriterion, |
| VlanIdCriterion vidCriterion, |
| VlanId assignedVlan, |
| MacAddress unicastMac, |
| ApplicationId applicationId) { |
| // Consider PortNumber.ANY as wildcard. Match ETH_DST only |
| if (portCriterion != null && portCriterion.port() == PortNumber.ANY) { |
| return processEthDstOnlyFilter(ethCriterion, applicationId); |
| } |
| |
| // Multicast MAC |
| if (ethCriterion.mask() != null) { |
| return processMcastEthDstFilter(ethCriterion, assignedVlan, unicastMac, applicationId); |
| } |
| |
| //handling untagged packets via assigned VLAN |
| if (vidCriterion.vlanId() == VlanId.NONE) { |
| vidCriterion = (VlanIdCriterion) Criteria.matchVlanId(assignedVlan); |
| } |
| // ofdpa cannot match on ALL portnumber, so we need to use separate |
| // rules for each port. |
| List<PortNumber> portnums = new ArrayList<>(); |
| if (portCriterion != null) { |
| if (portCriterion.port() == PortNumber.ALL) { |
| for (Port port : deviceService.getPorts(deviceId)) { |
| if (port.number().toLong() > 0 && port.number().toLong() < OFPP_MAX) { |
| portnums.add(port.number()); |
| } |
| } |
| } else { |
| portnums.add(portCriterion.port()); |
| } |
| } |
| |
| List<FlowRule> rules = new ArrayList<>(); |
| for (PortNumber pnum : portnums) { |
| // TMAC rules for unicast IP packets |
| TrafficSelector.Builder selector = DefaultTrafficSelector.builder(); |
| TrafficTreatment.Builder treatment = DefaultTrafficTreatment.builder(); |
| selector.matchInPort(pnum); |
| selector.matchVlanId(vidCriterion.vlanId()); |
| selector.matchEthType(Ethernet.TYPE_IPV4); |
| selector.matchEthDst(ethCriterion.mac()); |
| treatment.transition(UNICAST_ROUTING_TABLE); |
| FlowRule rule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(selector.build()) |
| .withTreatment(treatment.build()) |
| .withPriority(DEFAULT_PRIORITY) |
| .fromApp(applicationId) |
| .makePermanent() |
| .forTable(TMAC_TABLE).build(); |
| rules.add(rule); |
| |
| // TMAC rules for MPLS packets |
| selector = DefaultTrafficSelector.builder(); |
| treatment = DefaultTrafficTreatment.builder(); |
| selector.matchInPort(pnum); |
| selector.matchVlanId(vidCriterion.vlanId()); |
| selector.matchEthType(Ethernet.MPLS_UNICAST); |
| selector.matchEthDst(ethCriterion.mac()); |
| treatment.transition(MPLS_TABLE_0); |
| rule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(selector.build()) |
| .withTreatment(treatment.build()) |
| .withPriority(DEFAULT_PRIORITY) |
| .fromApp(applicationId) |
| .makePermanent() |
| .forTable(TMAC_TABLE).build(); |
| rules.add(rule); |
| |
| // TMAC rules for IPv6 packets |
| selector = DefaultTrafficSelector.builder(); |
| treatment = DefaultTrafficTreatment.builder(); |
| selector.matchInPort(pnum); |
| selector.matchVlanId(vidCriterion.vlanId()); |
| selector.matchEthType(Ethernet.TYPE_IPV6); |
| selector.matchEthDst(ethCriterion.mac()); |
| treatment.transition(UNICAST_ROUTING_TABLE); |
| rule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(selector.build()) |
| .withTreatment(treatment.build()) |
| .withPriority(DEFAULT_PRIORITY) |
| .fromApp(applicationId) |
| .makePermanent() |
| .forTable(TMAC_TABLE).build(); |
| rules.add(rule); |
| } |
| return ImmutableList.of(rules); |
| } |
| |
| @Override |
| protected List<List<FlowRule>> processEthDstOnlyFilter(EthCriterion ethCriterion, |
| ApplicationId applicationId) { |
| TrafficSelector.Builder selector = DefaultTrafficSelector.builder(); |
| TrafficTreatment.Builder treatment = DefaultTrafficTreatment.builder(); |
| selector.matchEthType(Ethernet.TYPE_IPV4); |
| selector.matchEthDst(ethCriterion.mac()); |
| treatment.transition(UNICAST_ROUTING_TABLE); |
| FlowRule rule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(selector.build()) |
| .withTreatment(treatment.build()) |
| .withPriority(DEFAULT_PRIORITY) |
| .fromApp(applicationId) |
| .makePermanent() |
| .forTable(TMAC_TABLE).build(); |
| return ImmutableList.of(ImmutableList.of(rule)); |
| } |
| |
| /* |
| * Open vSwitch emulation allows MPLS ECMP. |
| * |
| * (non-Javadoc) |
| * @see org.onosproject.driver.pipeline.OFDPA2Pipeline#processEthTypeSpecific |
| */ |
| @Override |
| protected Collection<FlowRule> processEthTypeSpecific(ForwardingObjective fwd) { |
| if (isDoubleTagged(fwd)) { |
| return processDoubleTaggedFwd(fwd); |
| } |
| TrafficSelector selector = fwd.selector(); |
| EthTypeCriterion ethType = |
| (EthTypeCriterion) selector.getCriterion(Criterion.Type.ETH_TYPE); |
| if ((ethType == null) || |
| (ethType.ethType().toShort() != Ethernet.TYPE_IPV4) && |
| (ethType.ethType().toShort() != Ethernet.MPLS_UNICAST) && |
| (ethType.ethType().toShort() != Ethernet.TYPE_IPV6)) { |
| log.warn("processSpecific: Unsupported forwarding objective criteria" |
| + "ethType:{} in dev:{}", ethType, deviceId); |
| fail(fwd, ObjectiveError.UNSUPPORTED); |
| return Collections.emptySet(); |
| } |
| boolean defaultRule = false; |
| int forTableId; |
| TrafficSelector.Builder filteredSelector = DefaultTrafficSelector.builder(); |
| TrafficSelector.Builder complementarySelector = DefaultTrafficSelector.builder(); |
| |
| if (ethType.ethType().toShort() == Ethernet.TYPE_IPV4) { |
| IpPrefix ipv4Dst = ((IPCriterion) selector.getCriterion(Criterion.Type.IPV4_DST)).ip(); |
| if (ipv4Dst.isMulticast()) { |
| if (ipv4Dst.prefixLength() != 32) { |
| log.warn("Multicast specific forwarding objective can only be /32"); |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return ImmutableSet.of(); |
| } |
| VlanId assignedVlan = readVlanFromSelector(fwd.meta()); |
| if (assignedVlan == null) { |
| log.warn("VLAN ID required by multicast specific fwd obj is missing. Abort."); |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return ImmutableSet.of(); |
| } |
| filteredSelector.matchVlanId(assignedVlan); |
| filteredSelector.matchEthType(Ethernet.TYPE_IPV4).matchIPDst(ipv4Dst); |
| forTableId = MULTICAST_ROUTING_TABLE; |
| log.debug("processing IPv4 multicast specific forwarding objective {} -> next:{}" |
| + " in dev:{}", fwd.id(), fwd.nextId(), deviceId); |
| } else { |
| if (ipv4Dst.prefixLength() == 0) { |
| // The entire IPV4_DST field is wildcarded intentionally |
| filteredSelector.matchEthType(Ethernet.TYPE_IPV4); |
| } else { |
| filteredSelector.matchEthType(Ethernet.TYPE_IPV4).matchIPDst(ipv4Dst); |
| } |
| forTableId = UNICAST_ROUTING_TABLE; |
| log.debug("processing IPv4 unicast specific forwarding objective {} -> next:{}" |
| + " in dev:{}", fwd.id(), fwd.nextId(), deviceId); |
| } |
| } else if (ethType.ethType().toShort() == Ethernet.TYPE_IPV6) { |
| IpPrefix ipv6Dst = ((IPCriterion) selector.getCriterion(Criterion.Type.IPV6_DST)).ip(); |
| if (ipv6Dst.isMulticast()) { |
| if (ipv6Dst.prefixLength() != IpAddress.INET6_BIT_LENGTH) { |
| log.debug("Multicast specific IPv6 forwarding objective can only be /128"); |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return ImmutableSet.of(); |
| } |
| VlanId assignedVlan = readVlanFromSelector(fwd.meta()); |
| if (assignedVlan == null) { |
| log.debug("VLAN ID required by multicast specific fwd obj is missing. Abort."); |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return ImmutableSet.of(); |
| } |
| filteredSelector.matchVlanId(assignedVlan); |
| filteredSelector.matchEthType(Ethernet.TYPE_IPV6).matchIPv6Dst(ipv6Dst); |
| forTableId = MULTICAST_ROUTING_TABLE; |
| log.debug("processing IPv6 multicast specific forwarding objective {} -> next:{}" |
| + " in dev:{}", fwd.id(), fwd.nextId(), deviceId); |
| } else { |
| if (buildIpv6Selector(filteredSelector, fwd) < 0) { |
| return Collections.emptyList(); |
| } |
| forTableId = UNICAST_ROUTING_TABLE; |
| } |
| } else { |
| filteredSelector |
| .matchEthType(Ethernet.MPLS_UNICAST) |
| .matchMplsLabel(((MplsCriterion) |
| selector.getCriterion(Criterion.Type.MPLS_LABEL)).label()); |
| MplsBosCriterion bos = (MplsBosCriterion) selector |
| .getCriterion(Criterion.Type.MPLS_BOS); |
| if (bos != null) { |
| filteredSelector.matchMplsBos(bos.mplsBos()); |
| } |
| forTableId = MPLS_TABLE_1; |
| log.debug("processing MPLS specific forwarding objective {} -> next:{}" |
| + " in dev {}", fwd.id(), fwd.nextId(), deviceId); |
| } |
| |
| TrafficTreatment.Builder tb = DefaultTrafficTreatment.builder(); |
| if (fwd.treatment() != null) { |
| for (Instruction i : fwd.treatment().allInstructions()) { |
| if (i instanceof L3ModificationInstruction) { |
| L3ModificationInstruction l3instr = (L3ModificationInstruction) i; |
| if (l3instr.subtype().equals(L3ModificationInstruction.L3SubType.TTL_IN) || |
| l3instr.subtype().equals(L3ModificationInstruction.L3SubType.TTL_OUT)) { |
| continue; |
| } |
| } |
| /* |
| * NOTE: OF-DPA does not support immediate instruction in |
| * L3 unicast and MPLS table. |
| */ |
| tb.deferred().add(i); |
| } |
| } |
| |
| if (fwd.nextId() != null) { |
| NextGroup next = getGroupForNextObjective(fwd.nextId()); |
| if (next != null) { |
| List<Deque<GroupKey>> gkeys = appKryo.deserialize(next.data()); |
| // we only need the top level group's key to point the flow to it |
| Group group = groupService.getGroup(deviceId, gkeys.get(0).peekFirst()); |
| if (group == null) { |
| log.warn("Group with key:{} for next-id:{} not found in dev:{}", |
| gkeys.get(0).peekFirst(), fwd.nextId(), deviceId); |
| fail(fwd, ObjectiveError.GROUPMISSING); |
| return Collections.emptySet(); |
| } |
| tb.deferred().group(group.id()); |
| } |
| } |
| tb.transition(ACL_TABLE); |
| FlowRule.Builder ruleBuilder = DefaultFlowRule.builder() |
| .fromApp(fwd.appId()) |
| .withPriority(fwd.priority()) |
| .forDevice(deviceId) |
| .withSelector(filteredSelector.build()) |
| .withTreatment(tb.build()) |
| .forTable(forTableId); |
| |
| if (fwd.permanent()) { |
| ruleBuilder.makePermanent(); |
| } else { |
| ruleBuilder.makeTemporary(fwd.timeout()); |
| } |
| Collection<FlowRule> flowRuleCollection = new ArrayList<>(); |
| flowRuleCollection.add(ruleBuilder.build()); |
| if (defaultRule) { |
| flowRuleCollection.add( |
| defaultRoute(fwd, complementarySelector, forTableId, tb) |
| ); |
| log.debug("Default rule 0.0.0.0/0 is being installed two rules"); |
| } |
| return flowRuleCollection; |
| } |
| |
| @Override |
| protected Collection<FlowRule> processEthDstSpecific(ForwardingObjective fwd) { |
| List<FlowRule> rules = new ArrayList<>(); |
| |
| // Build filtered selector |
| TrafficSelector selector = fwd.selector(); |
| EthCriterion ethCriterion = (EthCriterion) selector |
| .getCriterion(Criterion.Type.ETH_DST); |
| VlanIdCriterion vlanIdCriterion = (VlanIdCriterion) selector |
| .getCriterion(VLAN_VID); |
| |
| if (vlanIdCriterion == null) { |
| log.warn("Forwarding objective for bridging requires vlan. Not " |
| + "installing fwd:{} in dev:{}", fwd.id(), deviceId); |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return Collections.emptySet(); |
| } |
| |
| TrafficSelector.Builder filteredSelectorBuilder = |
| DefaultTrafficSelector.builder(); |
| // Do not match MacAddress for subnet broadcast entry |
| if (!ethCriterion.mac().equals(NONE) && !ethCriterion.mac().equals(BROADCAST)) { |
| filteredSelectorBuilder.matchEthDst(ethCriterion.mac()); |
| log.debug("processing L2 forwarding objective:{} -> next:{} in dev:{}", |
| fwd.id(), fwd.nextId(), deviceId); |
| } else { |
| log.debug("processing L2 Broadcast forwarding objective:{} -> next:{} " |
| + "in dev:{} for vlan:{}", |
| fwd.id(), fwd.nextId(), deviceId, vlanIdCriterion.vlanId()); |
| } |
| filteredSelectorBuilder.matchVlanId(vlanIdCriterion.vlanId()); |
| TrafficSelector filteredSelector = filteredSelectorBuilder.build(); |
| |
| if (fwd.treatment() != null) { |
| log.warn("Ignoring traffic treatment in fwd rule {} meant for L2 table" |
| + "for dev:{}. Expecting only nextId", fwd.id(), deviceId); |
| } |
| |
| TrafficTreatment.Builder treatmentBuilder = DefaultTrafficTreatment.builder(); |
| if (fwd.nextId() != null) { |
| NextGroup next = getGroupForNextObjective(fwd.nextId()); |
| if (next != null) { |
| List<Deque<GroupKey>> gkeys = appKryo.deserialize(next.data()); |
| // we only need the top level group's key to point the flow to it |
| Group group = groupService.getGroup(deviceId, gkeys.get(0).peekFirst()); |
| if (group != null) { |
| treatmentBuilder.deferred().group(group.id()); |
| } else { |
| log.warn("Group with key:{} for next-id:{} not found in dev:{}", |
| gkeys.get(0).peekFirst(), fwd.nextId(), deviceId); |
| fail(fwd, ObjectiveError.GROUPMISSING); |
| return Collections.emptySet(); |
| } |
| } |
| } |
| treatmentBuilder.immediate().transition(ACL_TABLE); |
| TrafficTreatment filteredTreatment = treatmentBuilder.build(); |
| |
| // Build bridging table entries |
| FlowRule.Builder flowRuleBuilder = DefaultFlowRule.builder(); |
| flowRuleBuilder.fromApp(fwd.appId()) |
| .withPriority(fwd.priority()) |
| .forDevice(deviceId) |
| .withSelector(filteredSelector) |
| .withTreatment(filteredTreatment) |
| .forTable(BRIDGING_TABLE); |
| if (fwd.permanent()) { |
| flowRuleBuilder.makePermanent(); |
| } else { |
| flowRuleBuilder.makeTemporary(fwd.timeout()); |
| } |
| rules.add(flowRuleBuilder.build()); |
| return rules; |
| } |
| |
| @Override |
| protected TrafficTreatment.Builder versatileTreatmentBuilder(ForwardingObjective fwd) { |
| // XXX driver does not currently do type checking as per Tables 65-67 in |
| // OFDPA 2.0 spec. The only allowed treatment is a punt to the controller. |
| TrafficTreatment.Builder ttBuilder = DefaultTrafficTreatment.builder(); |
| if (fwd.treatment() != null) { |
| for (Instruction ins : fwd.treatment().allInstructions()) { |
| if (ins instanceof OutputInstruction) { |
| OutputInstruction o = (OutputInstruction) ins; |
| if (PortNumber.CONTROLLER.equals(o.port())) { |
| ttBuilder.transition(PUNT_TABLE); |
| } else { |
| log.warn("Only allowed treatments in versatile forwarding " |
| + "objectives are punts to the controller"); |
| } |
| } else if (ins instanceof NoActionInstruction) { |
| // No action is allowed and nothing needs to be done |
| } else { |
| log.warn("Cannot process instruction in versatile fwd {}", ins); |
| } |
| } |
| if (fwd.treatment().clearedDeferred()) { |
| ttBuilder.wipeDeferred(); |
| } |
| } |
| if (fwd.nextId() != null) { |
| // Override case |
| NextGroup next = getGroupForNextObjective(fwd.nextId()); |
| if (next == null) { |
| fail(fwd, ObjectiveError.BADPARAMS); |
| return null; |
| } |
| List<Deque<GroupKey>> gkeys = appKryo.deserialize(next.data()); |
| // we only need the top level group's key to point the flow to it |
| Group group = groupService.getGroup(deviceId, gkeys.get(0).peekFirst()); |
| if (group == null) { |
| log.warn("Group with key:{} for next-id:{} not found in dev:{}", |
| gkeys.get(0).peekFirst(), fwd.nextId(), deviceId); |
| fail(fwd, ObjectiveError.GROUPMISSING); |
| return null; |
| } |
| ttBuilder.deferred().group(group.id()); |
| } |
| return ttBuilder; |
| } |
| |
| /* |
| * Open vSwitch emulation requires table-miss-entries in forwarding tables. |
| * Real OFDPA does not require these rules as they are put in by default. |
| * |
| * (non-Javadoc) |
| * @see org.onosproject.driver.pipeline.OFDPA2Pipeline#initializePipeline() |
| */ |
| @Override |
| protected void initializePipeline() { |
| initTableMiss(PORT_TABLE, VLAN_TABLE, null); |
| initTableMiss(VLAN_TABLE, ACL_TABLE, null); |
| initTableMiss(VLAN_1_TABLE, ACL_TABLE, null); |
| initTableMiss(TMAC_TABLE, BRIDGING_TABLE, null); |
| initTableMiss(UNICAST_ROUTING_TABLE, ACL_TABLE, null); |
| initTableMiss(MULTICAST_ROUTING_TABLE, ACL_TABLE, null); |
| initTableMiss(EGRESS_VLAN_FLOW_TABLE_IN_INGRESS, ACL_TABLE, null); |
| initTableMiss(UNICAST_ROUTING_TABLE_1, ACL_TABLE, null); |
| initTableMiss(MPLS_TABLE_0, MPLS_TABLE_1, null); |
| initTableMiss(MPLS_TABLE_1, ACL_TABLE, null); |
| initTableMiss(BRIDGING_TABLE, ACL_TABLE, null); |
| initTableMiss(ACL_TABLE, -1, null); |
| initPuntTable(); |
| |
| initPopVlanPuntGroup(); |
| } |
| |
| /** |
| * Install table-miss flow entry. |
| * |
| * If treatment exists, use it directly. |
| * Else if treatment does not exist but nextTable > 0, transit to next table. |
| * Else apply empty treatment. |
| * |
| * @param thisTable this table ID |
| * @param nextTable next table ID |
| * @param treatment traffic treatment to apply. |
| */ |
| private void initTableMiss(int thisTable, int nextTable, TrafficTreatment treatment) { |
| FlowRuleOperations.Builder ops = FlowRuleOperations.builder(); |
| TrafficSelector selector = DefaultTrafficSelector.builder().build(); |
| |
| if (treatment == null) { |
| TrafficTreatment.Builder tBuilder = DefaultTrafficTreatment.builder(); |
| if (nextTable > 0) { |
| tBuilder.transition(nextTable); |
| } |
| treatment = tBuilder.build(); |
| } |
| |
| FlowRule rule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(selector) |
| .withTreatment(treatment) |
| .withPriority(LOWEST_PRIORITY) |
| .fromApp(driverId) |
| .makePermanent() |
| .forTable(thisTable).build(); |
| ops = ops.add(rule); |
| |
| flowRuleService.apply(ops.build(new FlowRuleOperationsContext() { |
| @Override |
| public void onSuccess(FlowRuleOperations ops) { |
| log.info("Initialized table {} on {}", thisTable, deviceId); |
| } |
| @Override |
| public void onError(FlowRuleOperations ops) { |
| log.warn("Failed to initialize table {} on {}", thisTable, deviceId); |
| } |
| })); |
| } |
| |
| /** |
| * Install lldp/bbdp matching rules at table PUNT_TABLE |
| * that forward traffic to controller. |
| * |
| */ |
| private void initPuntTable() { |
| FlowRuleOperations.Builder ops = FlowRuleOperations.builder(); |
| TrafficTreatment treatment = DefaultTrafficTreatment.builder().punt().build(); |
| |
| // Add punt rule for LLDP and BDDP |
| TrafficSelector.Builder lldpSelector = DefaultTrafficSelector.builder(); |
| lldpSelector.matchEthType(EthType.EtherType.LLDP.ethType().toShort()); |
| FlowRule lldpRule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(lldpSelector.build()) |
| .withTreatment(treatment) |
| .withPriority(HIGHEST_PRIORITY) |
| .fromApp(driverId) |
| .makePermanent() |
| .forTable(PUNT_TABLE).build(); |
| ops = ops.add(lldpRule); |
| |
| TrafficSelector.Builder bbdpSelector = DefaultTrafficSelector.builder(); |
| bbdpSelector.matchEthType(EthType.EtherType.BDDP.ethType().toShort()); |
| FlowRule bbdpRule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(bbdpSelector.build()) |
| .withTreatment(treatment) |
| .withPriority(HIGHEST_PRIORITY) |
| .fromApp(driverId) |
| .makePermanent() |
| .forTable(PUNT_TABLE).build(); |
| ops.add(bbdpRule); |
| |
| flowRuleService.apply(ops.build(new FlowRuleOperationsContext() { |
| @Override |
| public void onSuccess(FlowRuleOperations ops) { |
| log.info("Initialized table {} on {}", PUNT_TABLE, deviceId); |
| } |
| @Override |
| public void onError(FlowRuleOperations ops) { |
| log.warn("Failed to initialize table {} on {}", PUNT_TABLE, deviceId); |
| } |
| })); |
| } |
| |
| /** |
| * Builds a indirect group contains pop_vlan and punt actions. |
| * <p> |
| * Using group instead of immediate action to ensure that |
| * the copy of packet on the data plane is not affected by the pop vlan action. |
| */ |
| private void initPopVlanPuntGroup() { |
| GroupKey groupKey = popVlanPuntGroupKey(); |
| TrafficTreatment bucketTreatment = DefaultTrafficTreatment.builder() |
| .popVlan().punt().build(); |
| GroupBucket bucket = |
| DefaultGroupBucket.createIndirectGroupBucket(bucketTreatment); |
| GroupDescription groupDesc = |
| new DefaultGroupDescription( |
| deviceId, |
| GroupDescription.Type.INDIRECT, |
| new GroupBuckets(Collections.singletonList(bucket)), |
| groupKey, |
| POP_VLAN_PUNT_GROUP_ID, |
| driverId); |
| groupService.addGroup(groupDesc); |
| |
| log.info("Initialized pop vlan punt group on {}", deviceId); |
| } |
| |
| /** |
| * Generates group key for a static indirect group that pop vlan and punt to |
| * controller. |
| * |
| * @return the group key of the indirect table |
| */ |
| private GroupKey popVlanPuntGroupKey() { |
| int hash = POP_VLAN_PUNT_GROUP_ID | (Objects.hash(deviceId) & FOUR_NIBBLE_MASK); |
| return new DefaultGroupKey(Ofdpa2Pipeline.appKryo.serialize(hash)); |
| } |
| |
| private class PopVlanPuntGroupChecker implements Runnable { |
| @Override |
| public void run() { |
| try { |
| groupCheckerLock.lock(); |
| // this can happen outside of the lock but I think it is safer |
| // to include it here. |
| Group group = groupService.getGroup(deviceId, popVlanPuntGroupKey()); |
| if (group != null) { |
| log.debug("PopVlanPuntGroupChecker: Installing {} missing rules at punt table.", |
| flowRuleQueue.size()); |
| |
| // if we have pending flow rules install them |
| if (flowRuleQueue.size() > 0) { |
| FlowRuleOperations.Builder ops = FlowRuleOperations.builder(); |
| // we should not care about the context here, it can only be add |
| // since when removing the rules the group should be there already. |
| flowRuleQueue.forEach(ops::add); |
| flowRuleService.apply(ops.build(new FlowRuleOperationsContext() { |
| @Override |
| public void onSuccess(FlowRuleOperations ops) { |
| log.debug("Applied {} pop vlan punt rules in device {}", |
| ops.stages().get(0).size(), deviceId); |
| } |
| |
| @Override |
| public void onError(FlowRuleOperations ops) { |
| log.error("Failed to apply all pop vlan punt rules in dev {}", deviceId); |
| } |
| })); |
| } |
| // this signifies that the group is created and now |
| // flow rules can be installed directly |
| flowRuleQueue = null; |
| // Schedule with an initial delay the miss table flow rule installation |
| // the delay is to make sure the queued flows are all installed before |
| // pushing the table miss flow rule |
| // TODO it can be further optimized by using context and completable future |
| groupChecker.schedule(new TableMissFlowInstaller(), 5000, TimeUnit.MILLISECONDS); |
| } |
| } finally { |
| groupCheckerLock.unlock(); |
| } |
| } |
| } |
| |
| private class TableMissFlowInstaller implements Runnable { |
| @Override |
| public void run() { |
| // Add table miss flow rule |
| FlowRuleOperations.Builder ops = FlowRuleOperations.builder(); |
| TrafficSelector.Builder defaultSelector = DefaultTrafficSelector.builder(); |
| TrafficTreatment treatment = DefaultTrafficTreatment.builder().punt().build(); |
| FlowRule defaultRule = DefaultFlowRule.builder() |
| .forDevice(deviceId) |
| .withSelector(defaultSelector.build()) |
| .withTreatment(treatment) |
| .withPriority(LOWEST_PRIORITY) |
| .fromApp(driverId) |
| .makePermanent() |
| .forTable(PUNT_TABLE).build(); |
| ops.add(defaultRule); |
| flowRuleService.apply(ops.build(new FlowRuleOperationsContext() { |
| @Override |
| public void onSuccess(FlowRuleOperations ops) { |
| log.info("Initialized table miss flow rule {} on {}", PUNT_TABLE, deviceId); |
| } |
| @Override |
| public void onError(FlowRuleOperations ops) { |
| log.warn("Failed to initialize table miss flow rule {} on {}", PUNT_TABLE, deviceId); |
| } |
| })); |
| // shutdown the group checker gracefully |
| groupChecker.shutdown(); |
| } |
| } |
| } |