| /* |
| * Copyright 2017-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <core.p4> |
| #include <v1model.p4> |
| |
| #include "../header.p4" |
| |
| control Next (inout parsed_headers_t hdr, |
| inout fabric_metadata_t fabric_metadata, |
| inout standard_metadata_t standard_metadata) { |
| |
| /* |
| * General actions. |
| */ |
| @hidden |
| action output(port_num_t port_num) { |
| standard_metadata.egress_spec = port_num; |
| } |
| |
| @hidden |
| action rewrite_smac(mac_addr_t smac) { |
| hdr.ethernet.src_addr = smac; |
| } |
| |
| @hidden |
| action rewrite_dmac(mac_addr_t dmac) { |
| hdr.ethernet.dst_addr = dmac; |
| } |
| |
| @hidden |
| action set_mpls_label(mpls_label_t label) { |
| fabric_metadata.mpls_label = label; |
| } |
| |
| @hidden |
| action routing(port_num_t port_num, mac_addr_t smac, mac_addr_t dmac) { |
| rewrite_smac(smac); |
| rewrite_dmac(dmac); |
| output(port_num); |
| } |
| |
| @hidden |
| action mpls_routing(port_num_t port_num, mac_addr_t smac, mac_addr_t dmac, |
| mpls_label_t label) { |
| set_mpls_label(label); |
| routing(port_num, smac, dmac); |
| } |
| |
| /* |
| * Next VLAN table. |
| * Modify VLAN ID based on next ID. |
| */ |
| direct_counter(CounterType.packets_and_bytes) next_vlan_counter; |
| |
| action set_vlan(vlan_id_t vlan_id) { |
| fabric_metadata.vlan_id = vlan_id; |
| next_vlan_counter.count(); |
| } |
| |
| table next_vlan { |
| key = { |
| fabric_metadata.next_id: exact @name("next_id"); |
| } |
| actions = { |
| set_vlan; |
| @defaultonly nop; |
| } |
| const default_action = nop(); |
| counters = next_vlan_counter; |
| } |
| |
| #ifdef WITH_XCONNECT |
| /* |
| * Cross-connect table. |
| * Bidirectional forwarding for the same next id. |
| */ |
| direct_counter(CounterType.packets_and_bytes) xconnect_counter; |
| |
| action output_xconnect(port_num_t port_num) { |
| output(port_num); |
| xconnect_counter.count(); |
| } |
| |
| action set_next_id_xconnect(next_id_t next_id) { |
| fabric_metadata.next_id = next_id; |
| xconnect_counter.count(); |
| } |
| |
| table xconnect { |
| key = { |
| standard_metadata.ingress_port: exact @name("ig_port"); |
| fabric_metadata.next_id: exact @name("next_id"); |
| } |
| actions = { |
| output_xconnect; |
| set_next_id_xconnect; |
| @defaultonly nop; |
| } |
| counters = xconnect_counter; |
| const default_action = nop(); |
| } |
| #endif // WITH_XCONNECT |
| |
| #ifdef WITH_SIMPLE_NEXT |
| /* |
| * Simple Table. |
| * Do a single egress action based on next id. |
| */ |
| direct_counter(CounterType.packets_and_bytes) simple_counter; |
| |
| action output_simple(port_num_t port_num) { |
| output(port_num); |
| simple_counter.count(); |
| } |
| |
| action routing_simple(port_num_t port_num, mac_addr_t smac, mac_addr_t dmac) { |
| routing(port_num, smac, dmac); |
| simple_counter.count(); |
| } |
| |
| action mpls_routing_simple(port_num_t port_num, mac_addr_t smac, mac_addr_t dmac, |
| mpls_label_t label) { |
| mpls_routing(port_num, smac, dmac, label); |
| simple_counter.count(); |
| } |
| |
| table simple { |
| key = { |
| fabric_metadata.next_id: exact @name("next_id"); |
| } |
| actions = { |
| output_simple; |
| routing_simple; |
| mpls_routing_simple; |
| @defaultonly nop; |
| } |
| const default_action = nop(); |
| counters = simple_counter; |
| } |
| #endif // WITH_SIMPLE_NEXT |
| |
| #ifdef WITH_HASHED_NEXT |
| /* |
| * Hashed table. |
| * Execute an action profile selector based on next id. |
| */ |
| action_selector(HashAlgorithm.crc16, 32w64, 32w16) hashed_selector; |
| direct_counter(CounterType.packets_and_bytes) hashed_counter; |
| |
| action output_hashed(port_num_t port_num) { |
| output(port_num); |
| hashed_counter.count(); |
| } |
| |
| action routing_hashed(port_num_t port_num, mac_addr_t smac, mac_addr_t dmac) { |
| routing(port_num, smac, dmac); |
| hashed_counter.count(); |
| } |
| |
| action mpls_routing_hashed(port_num_t port_num, mac_addr_t smac, mac_addr_t dmac, |
| mpls_label_t label) { |
| mpls_routing(port_num, smac, dmac, label); |
| hashed_counter.count(); |
| } |
| |
| table hashed { |
| key = { |
| fabric_metadata.next_id: exact @name("next_id"); |
| hdr.ipv4.dst_addr: selector; |
| hdr.ipv4.src_addr: selector; |
| fabric_metadata.ip_proto: selector; |
| fabric_metadata.l4_sport: selector; |
| fabric_metadata.l4_dport: selector; |
| } |
| actions = { |
| output_hashed; |
| routing_hashed; |
| mpls_routing_hashed; |
| @defaultonly nop; |
| } |
| implementation = hashed_selector; |
| counters = hashed_counter; |
| const default_action = nop(); |
| } |
| #endif // WITH_HASHED_NEXT |
| |
| /* |
| * Multicast |
| * Maps next IDs to PRE multicat group IDs. |
| */ |
| direct_counter(CounterType.packets_and_bytes) multicast_counter; |
| |
| action set_mcast_group_id(mcast_group_id_t group_id) { |
| standard_metadata.mcast_grp = group_id; |
| fabric_metadata.is_multicast = _TRUE; |
| multicast_counter.count(); |
| } |
| |
| table multicast { |
| key = { |
| fabric_metadata.next_id: exact @name("next_id"); |
| } |
| actions = { |
| set_mcast_group_id; |
| @defaultonly nop; |
| } |
| counters = multicast_counter; |
| const default_action = nop(); |
| } |
| |
| apply { |
| #ifdef WITH_XCONNECT |
| // xconnect might set a new next_id. |
| xconnect.apply(); |
| #endif // WITH_XCONNECT |
| #ifdef WITH_SIMPLE_NEXT |
| simple.apply(); |
| #endif // WITH_SIMPLE_NEXT |
| #ifdef WITH_HASHED_NEXT |
| hashed.apply(); |
| #endif // WITH_HASHED_NEXT |
| multicast.apply(); |
| next_vlan.apply(); |
| } |
| } |
| |
| control EgressNextControl (inout parsed_headers_t hdr, |
| inout fabric_metadata_t fabric_metadata, |
| inout standard_metadata_t standard_metadata) { |
| @hidden |
| action pop_mpls_if_present() { |
| hdr.mpls.setInvalid(); |
| // Assuming there's an IP header after the MPLS one. |
| fabric_metadata.eth_type = fabric_metadata.ip_eth_type; |
| } |
| |
| @hidden |
| action set_mpls() { |
| hdr.mpls.setValid(); |
| hdr.mpls.label = fabric_metadata.mpls_label; |
| hdr.mpls.tc = 3w0; |
| hdr.mpls.bos = 1w1; // BOS = TRUE |
| hdr.mpls.ttl = fabric_metadata.mpls_ttl; // Decrement after push. |
| fabric_metadata.eth_type = ETHERTYPE_MPLS; |
| } |
| |
| @hidden |
| action push_vlan() { |
| // If VLAN is already valid, we overwrite it with a potentially new VLAN |
| // ID, and same CFI, PRI, and eth_type values found in ingress. |
| hdr.vlan_tag.setValid(); |
| hdr.vlan_tag.cfi = fabric_metadata.vlan_cfi; |
| hdr.vlan_tag.pri = fabric_metadata.vlan_pri; |
| hdr.vlan_tag.eth_type = fabric_metadata.eth_type; |
| hdr.vlan_tag.vlan_id = fabric_metadata.vlan_id; |
| hdr.ethernet.eth_type = ETHERTYPE_VLAN; |
| } |
| |
| /* |
| * Egress VLAN Table. |
| * Pops the VLAN tag if the pair egress port and VLAN ID is matched. |
| */ |
| direct_counter(CounterType.packets_and_bytes) egress_vlan_counter; |
| |
| action pop_vlan() { |
| hdr.ethernet.eth_type = fabric_metadata.eth_type; |
| hdr.vlan_tag.setInvalid(); |
| egress_vlan_counter.count(); |
| } |
| |
| table egress_vlan { |
| key = { |
| fabric_metadata.vlan_id: exact @name("vlan_id"); |
| standard_metadata.egress_port: exact @name("eg_port"); |
| } |
| actions = { |
| pop_vlan; |
| @defaultonly nop; |
| } |
| const default_action = nop(); |
| counters = egress_vlan_counter; |
| } |
| |
| apply { |
| if (fabric_metadata.is_multicast == _TRUE |
| && standard_metadata.ingress_port == standard_metadata.egress_port) { |
| mark_to_drop(); |
| } |
| |
| if (fabric_metadata.mpls_label == 0) { |
| if (hdr.mpls.isValid()) pop_mpls_if_present(); |
| } else { |
| set_mpls(); |
| } |
| |
| if (!egress_vlan.apply().hit) { |
| // Push VLAN tag if not the default one. |
| if (fabric_metadata.vlan_id != DEFAULT_VLAN_ID) { |
| push_vlan(); |
| } |
| } |
| |
| // TTL decrement and check. |
| if (hdr.mpls.isValid()) { |
| hdr.mpls.ttl = hdr.mpls.ttl - 1; |
| if (hdr.mpls.ttl == 0) mark_to_drop(); |
| } else { |
| if(hdr.ipv4.isValid()) { |
| hdr.ipv4.ttl = hdr.ipv4.ttl - 1; |
| if (hdr.ipv4.ttl == 0) mark_to_drop(); |
| } |
| #ifdef WITH_IPV6 |
| else if (hdr.ipv6.isValid()) { |
| hdr.ipv6.hop_limit = hdr.ipv6.hop_limit - 1; |
| if (hdr.ipv6.hop_limit == 0) mark_to_drop(); |
| } |
| #endif // WITH_IPV6 |
| } |
| } |
| } |