| // alarm topology overlay - client side |
| // |
| // This is the glue that binds our business logic (in alarmTopovDemo.js) |
| // to the overlay framework. |
| |
| (function () { |
| 'use strict'; |
| |
| // injected refs |
| var $log, tov, atds, ns; |
| |
| // internal state should be kept in the service module (not here) |
| |
| var viewbox = '0 0 110 110'; |
| |
| // alarm clock glyph (view box 110x110) |
| var clock = 'M92.9,61.3a39,39,0,1,1-39-39,39,39,0,0,1,39,39h0Z' + |
| 'M44,19.3c-4.4-7.4-14.8-9.3-23.2-4.2S9.1,30.2,13.5,37.6m80.8,0' + |
| 'c4.4-7.4,1.2-17.5-7.3-22.5s-18.8-3.2-23.3,4.2m-8.4,1.8V16.5h4.4' + |
| 'V11.9H48.2v4.6h4.6v4.6M51.6,56.4H51.5' + |
| 'a5.4,5.4,0,0,0,2.4,10.3,4.7,4.7,0,0,0,4.9-3.1H74.5' + |
| 'a2.2,2.2,0,0,0,2.4-2.2,2.4,2.4,0,0,0-2.4-2.3H58.8' + |
| 'a5.3,5.3,0,0,0-2.5-2.6H56.2V32.9' + |
| 'a2.3,2.3,0,0,0-.6-1.7,2.2,2.2,0,0,0-1.6-.7,2.4,2.4,0,0,0-2.4,2.4' + |
| 'h0V56.4M82.2,91.1l-7.1,5.3-0.2.2-1.2,2.1a0.6,0.6,0,0,0,.2.8' + |
| 'h0.2c2.6,0.4,10.7.9,10.3-1.2m-60.8,0c-0.4,2.1,7.7,1.6,10.3,1.2' + |
| 'h0.2a0.6,0.6,0,0,0,.2-0.8l-1.2-2.1-0.2-.2-7.1-5.3'; |
| |
| // overlapping alarm clocks glyph (view box 110x110) |
| var clocks = "M65.7,26.6A34.7,34.7,0,0,0,31,61.5c0,19,16,35.2,35.5,34.8" + |
| "a35.1,35.1,0,0,0,34-35.1A34.7,34.7,0,0,0,65.7,26.6Z" + |
| "m8.6-2.7,27.4,16.4a31.3,31.3,0,0,0,1.2-3.1c1.3-5,0-9.4-3.2-13.2" + |
| "a16.9,16.9,0,0,0-16-6.2A12.8,12.8,0,0,0,74.3,23.9Z" + |
| "M57,23.9L56.4,23a12.9,12.9,0,0,0-10.7-5.5,16.9,16.9,0,0,0-15.1,8," + |
| "14.1,14.1,0,0,0-2.3,11.2,10.4,10.4,0,0,0,1.4,3.5Z" + |
| "M26.9,31.6A33.7,33.7,0,0,0,9.7,59.3C9.2,72.8,14.9,83.1,26,90.7l1-1.9" + |
| "a0.6,0.6,0,0,0-.2-1A34.2,34.2,0,0,1,15.5,50.4" + |
| "a33.8,33.8,0,0,1,10.8-16,1.2,1.2,0,0,0,.5-0.6" + |
| "C26.9,33.1,26.9,32.4,26.9,31.6Z" + |
| "m1,8.1C14.6,55.9,19.2,81,37.6,91.1l1-2.3-2.8-2.4" + |
| "C26.4,77.6,22.9,66.7,25.1,54" + |
| "a31.6,31.6,0,0,1,4.2-10.8,0.8,0.8,0,0,0,.1-0.6Z" + |
| "M12,38.4a11.2,11.2,0,0,1-1.4-5.8A13.7,13.7,0,0,1,14.3,24" + |
| "a17.3,17.3,0,0,1,10.5-5.7h0.4C19,18,13.7,20,9.9,25.2" + |
| "a14.5,14.5,0,0,0-3,11,11.2,11.2,0,0,0,1.6,4.3Z" + |
| "m5.5-2.7L21,33" + |
| "a1,1,0,0,0,.3-0.7,14,14,0,0,1,3.9-8.6,17.3,17.3,0,0,1,10.2-5.4" + |
| "l0.6-.2C24.4,17.3,16.4,27,17.4,35.7Z" + |
| "M70.9,17.2H60.7v4.1h4v4.2H67V21.3h3.9V17.2Z" + |
| "M90.9,87.9l-0.5.3L86,91.5a7.9,7.9,0,0,0-2.6,3.1" + |
| "c-0.3.6-.2,0.8,0.5,0.9a27.9,27.9,0,0,0,6.8.2l1.6-.4" + |
| "a0.8,0.8,0,0,0,.6-1.2l-0.4-1.4Z" + |
| "m-50.2,0-1.8,6c-0.3,1.1-.1,1.4.9,1.7h0.7a26.3,26.3,0,0,0,7.2-.1" + |
| "c0.8-.1.9-0.4,0.5-1.1a8.2,8.2,0,0,0-2.7-3.1Z" + |
| "m-10.8-.4-0.2.6L28,93.5a0.9,0.9,0,0,0,.7,1.3,7.7,7.7,0,0,0,2.2.4" + |
| "l5.9-.2c0.5,0,.7-0.3.5-0.8a7.6,7.6,0,0,0-2.2-2.9Z" + |
| "m-11.3,0-0.2.7-1.6,5.4c-0.2.8-.1,1.2,0.7,1.4a8,8,0,0,0,2.2.4l6-.2" + |
| "c0.4,0,.7-0.3.5-0.6a7.1,7.1,0,0,0-1.9-2.7l-2.8-2.1Z" + |
| "M65.7,26.6m-2,30.3a4.4,4.4,0,0,0-2.2,2,4.8,4.8,0,0,0,4,7.2," + |
| "4.1,4.1,0,0,0,4.3-2.3,0.8,0.8,0,0,1,.8-0.5H84.1" + |
| "a1.9,1.9,0,0,0,2-1.7,2.1,2.1,0,0,0-1.7-2.2H70.8" + |
| "a1,1,0,0,1-1-.5,6.4,6.4,0,0,0-1.5-1.6,1.1,1.1,0,0,1-.5-1" + |
| "q0-10.1,0-20.3a1.9,1.9,0,0,0-2.2-2.1,2.1,2.1,0,0,0-1.8,2.2" + |
| "q0,6.1,0,12.2C63.7,51.2,63.7,54,63.7,56.9Z"; |
| |
| // our overlay definition |
| var overlay = { |
| // NOTE: this must match the ID defined in AppUiTopovOverlay |
| overlayId: 'alarmsTopo-overlay', |
| glyphId: '*clock', |
| tooltip: 'Alarms Overlay', |
| // These glyphs get installed using the overlayId as a prefix. |
| // e.g. 'clock' is installed as 'alarmsTopo-overlay-clock' |
| // They can be referenced (from this overlay) as '*clock' |
| // That is, the '*' prefix stands in for 'alarmsTopo-overlay-' |
| glyphs: { |
| clock: { |
| vb: viewbox, |
| d: clock |
| }, |
| clocks: { |
| vb: viewbox, |
| d: clocks |
| } |
| }, |
| activate: function () { |
| $log.debug("Alarm topology overlay ACTIVATED"); |
| atds.startDisplay(); |
| }, |
| deactivate: function () { |
| atds.stopDisplay(); |
| $log.debug("Alarm topology overlay DEACTIVATED"); |
| }, |
| // detail panel button definitions |
| buttons: { |
| alarm1button: { |
| gid: '*clock', |
| tt: 'Show alarms for this device', |
| cb: function (data) { |
| $log.debug('Show alarms for selected device. data:', data); |
| ns.navTo("alarmTable", {devId: data.id}); |
| } |
| } |
| }, |
| hooks: { |
| // hooks for when the selection changes... |
| empty: function () { |
| selectionCallback('empty'); |
| }, |
| single: function (data) { |
| selectionCallback('single', data); |
| }, |
| multi: function (selectOrder) { |
| selectionCallback('multi', selectOrder); |
| tov.addDetailButton('alarm1button'); |
| } |
| } |
| }; |
| |
| |
| function buttonCallback(x) { |
| $log.debug('Toolbar-button callback', x); |
| } |
| |
| function selectionCallback(x, d) { |
| $log.debug('Selection callback', x, d); |
| } |
| |
| // invoke code to register with the overlay service |
| angular.module('ovAlarmTopov') |
| .run(['$log', 'TopoOverlayService', 'AlarmTopovDemoService', 'NavService', |
| function (_$log_, _tov_, _atds_, _ns_) { |
| $log = _$log_; |
| tov = _tov_; |
| atds = _atds_; |
| ns = _ns_; |
| tov.register(overlay); |
| }]); |
| |
| }()); |