Adding OpenConfig YANG models.
Change-Id: I0a2fdd5826e80933cf4b9ae939ff3051acec02aa
diff --git a/models/openconfig/src/main/yang/comm/iana-if-type.yang b/models/openconfig/src/main/yang/comm/iana-if-type.yang
new file mode 100644
index 0000000..931f8b6
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/iana-if-type.yang
@@ -0,0 +1,1629 @@
+module iana-if-type {
+ namespace "urn:ietf:params:xml:ns:yang:iana-if-type";
+ prefix ianaift;
+
+ import ietf-interfaces {
+ prefix if;
+ }
+
+ organization "IANA";
+ contact
+ " Internet Assigned Numbers Authority
+
+ Postal: ICANN
+ 12025 Waterfront Drive, Suite 300
+ Los Angeles, CA 90094-2536
+ United States
+
+ Tel: +1 310 301 5800
+ <mailto:iana&iana.org>";
+ description
+ "This YANG module defines YANG identities for IANA-registered
+ interface types.
+
+ This YANG module is maintained by IANA and reflects the
+ 'ifType definitions' registry.
+
+ The latest revision of this YANG module can be obtained from
+ the IANA web site.
+
+ Requests for new values should be made to IANA via
+ email (iana&iana.org).
+
+ Copyright (c) 2014 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ The initial version of this YANG module is part of RFC 7224;
+ see the RFC itself for full legal notices.";
+ reference
+ "IANA 'ifType definitions' registry.
+ <http://www.iana.org/assignments/smi-numbers>";
+
+ revision 2017-03-30 {
+ description
+ "Registered ifType 290.";
+ }
+
+ revision 2017-01-19 {
+ description
+ "Registered ifType 289.";
+ }
+
+ revision 2016-11-23 {
+ description
+ "Registered ifTypes 283-288.";
+ }
+
+ revision 2016-06-09 {
+ description
+ "Registered ifType 282.";
+ }
+ revision 2016-05-03 {
+ description
+ "Registered ifType 281.";
+ }
+ revision 2015-06-12 {
+ description
+ "Corrected formatting issue.";
+ }
+ revision 2014-09-24 {
+ description
+ "Registered ifType 280.";
+ }
+ revision 2014-09-19 {
+ description
+ "Registered ifType 279.";
+ }
+ revision 2014-07-03 {
+ description
+ "Registered ifTypes 277-278.";
+ }
+ revision 2014-05-19 {
+ description
+ "Updated the contact address.";
+ }
+ revision 2014-05-08 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 7224: IANA Interface Type YANG Module";
+ }
+
+ identity iana-interface-type {
+ base if:interface-type;
+ description
+ "This identity is used as a base for all interface types
+ defined in the 'ifType definitions' registry.";
+ }
+
+ identity other {
+ base iana-interface-type;
+ }
+ identity regular1822 {
+ base iana-interface-type;
+ }
+ identity hdh1822 {
+ base iana-interface-type;
+ }
+ identity ddnX25 {
+ base iana-interface-type;
+ }
+ identity rfc877x25 {
+ base iana-interface-type;
+ reference
+ "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer";
+ }
+ identity ethernetCsmacd {
+ base iana-interface-type;
+ description
+ "For all Ethernet-like interfaces, regardless of speed,
+ as per RFC 3635.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity iso88023Csmacd {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Deprecated via RFC 3635.
+ Use ethernetCsmacd(6) instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity iso88024TokenBus {
+ base iana-interface-type;
+ }
+ identity iso88025TokenRing {
+ base iana-interface-type;
+ }
+ identity iso88026Man {
+ base iana-interface-type;
+ }
+ identity starLan {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Deprecated via RFC 3635.
+ Use ethernetCsmacd(6) instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity proteon10Mbit {
+ base iana-interface-type;
+ }
+ identity proteon80Mbit {
+ base iana-interface-type;
+ }
+ identity hyperchannel {
+ base iana-interface-type;
+ }
+ identity fddi {
+ base iana-interface-type;
+ reference
+ "RFC 1512 - FDDI Management Information Base";
+ }
+ identity lapb {
+ base iana-interface-type;
+ reference
+ "RFC 1381 - SNMP MIB Extension for X.25 LAPB";
+ }
+ identity sdlc {
+ base iana-interface-type;
+ }
+ identity ds1 {
+ base iana-interface-type;
+ description
+ "DS1-MIB.";
+ reference
+ "RFC 4805 - Definitions of Managed Objects for the
+ DS1, J1, E1, DS2, and E2 Interface Types";
+ }
+ identity e1 {
+ base iana-interface-type;
+ status obsolete;
+ description
+ "Obsolete; see DS1-MIB.";
+ reference
+ "RFC 4805 - Definitions of Managed Objects for the
+ DS1, J1, E1, DS2, and E2 Interface Types";
+ }
+ identity basicISDN {
+ base iana-interface-type;
+ description
+ "No longer used. See also RFC 2127.";
+ }
+ identity primaryISDN {
+ base iana-interface-type;
+ description
+ "No longer used. See also RFC 2127.";
+ }
+ identity propPointToPointSerial {
+ base iana-interface-type;
+ description
+ "Proprietary serial.";
+ }
+ identity ppp {
+ base iana-interface-type;
+ }
+ identity softwareLoopback {
+ base iana-interface-type;
+ }
+ identity eon {
+ base iana-interface-type;
+ description
+ "CLNP over IP.";
+ }
+ identity ethernet3Mbit {
+ base iana-interface-type;
+ }
+ identity nsip {
+ base iana-interface-type;
+ description
+ "XNS over IP.";
+ }
+ identity slip {
+ base iana-interface-type;
+ description
+ "Generic SLIP.";
+ }
+ identity ultra {
+ base iana-interface-type;
+ description
+ "Ultra Technologies.";
+ }
+ identity ds3 {
+ base iana-interface-type;
+ description
+ "DS3-MIB.";
+ reference
+ "RFC 3896 - Definitions of Managed Objects for the
+ DS3/E3 Interface Type";
+ }
+ identity sip {
+ base iana-interface-type;
+ description
+ "SMDS, coffee.";
+ reference
+ "RFC 1694 - Definitions of Managed Objects for SMDS
+ Interfaces using SMIv2";
+ }
+ identity frameRelay {
+ base iana-interface-type;
+ description
+ "DTE only.";
+ reference
+ "RFC 2115 - Management Information Base for Frame Relay
+ DTEs Using SMIv2";
+ }
+ identity rs232 {
+ base iana-interface-type;
+ reference
+ "RFC 1659 - Definitions of Managed Objects for RS-232-like
+ Hardware Devices using SMIv2";
+ }
+ identity para {
+ base iana-interface-type;
+ description
+ "Parallel-port.";
+ reference
+ "RFC 1660 - Definitions of Managed Objects for
+ Parallel-printer-like Hardware Devices using
+ SMIv2";
+ }
+ identity arcnet {
+ base iana-interface-type;
+ description
+ "ARCnet.";
+ }
+ identity arcnetPlus {
+ base iana-interface-type;
+ description
+ "ARCnet Plus.";
+ }
+ identity atm {
+ base iana-interface-type;
+ description
+ "ATM cells.";
+ }
+ identity miox25 {
+ base iana-interface-type;
+ reference
+ "RFC 1461 - SNMP MIB extension for Multiprotocol
+ Interconnect over X.25";
+ }
+ identity sonet {
+ base iana-interface-type;
+ description
+ "SONET or SDH.";
+ }
+ identity x25ple {
+ base iana-interface-type;
+ reference
+ "RFC 2127 - ISDN Management Information Base using SMIv2";
+ }
+ identity iso88022llc {
+ base iana-interface-type;
+ }
+ identity localTalk {
+ base iana-interface-type;
+ }
+ identity smdsDxi {
+ base iana-interface-type;
+ }
+ identity frameRelayService {
+ base iana-interface-type;
+ description
+ "FRNETSERV-MIB.";
+ reference
+ "RFC 2954 - Definitions of Managed Objects for Frame
+ Relay Service";
+ }
+ identity v35 {
+ base iana-interface-type;
+ }
+ identity hssi {
+ base iana-interface-type;
+ }
+ identity hippi {
+ base iana-interface-type;
+ }
+ identity modem {
+ base iana-interface-type;
+ description
+ "Generic modem.";
+ }
+ identity aal5 {
+ base iana-interface-type;
+ description
+ "AAL5 over ATM.";
+ }
+ identity sonetPath {
+ base iana-interface-type;
+ }
+ identity sonetVT {
+ base iana-interface-type;
+ }
+ identity smdsIcip {
+ base iana-interface-type;
+ description
+ "SMDS InterCarrier Interface.";
+ }
+ identity propVirtual {
+ base iana-interface-type;
+ description
+ "Proprietary virtual/internal.";
+ reference
+ "RFC 2863 - The Interfaces Group MIB";
+ }
+ identity propMultiplexor {
+ base iana-interface-type;
+ description
+ "Proprietary multiplexing.";
+ reference
+ "RFC 2863 - The Interfaces Group MIB";
+ }
+ identity ieee80212 {
+ base iana-interface-type;
+ description
+ "100BaseVG.";
+ }
+ identity fibreChannel {
+ base iana-interface-type;
+ description
+ "Fibre Channel.";
+ }
+ identity hippiInterface {
+ base iana-interface-type;
+ description
+ "HIPPI interfaces.";
+ }
+ identity frameRelayInterconnect {
+ base iana-interface-type;
+ status obsolete;
+ description
+ "Obsolete; use either
+ frameRelay(32) or frameRelayService(44).";
+ }
+ identity aflane8023 {
+ base iana-interface-type;
+ description
+ "ATM Emulated LAN for 802.3.";
+ }
+ identity aflane8025 {
+ base iana-interface-type;
+ description
+ "ATM Emulated LAN for 802.5.";
+ }
+ identity cctEmul {
+ base iana-interface-type;
+ description
+ "ATM Emulated circuit.";
+ }
+ identity fastEther {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Obsoleted via RFC 3635.
+ ethernetCsmacd(6) should be used instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity isdn {
+ base iana-interface-type;
+ description
+ "ISDN and X.25.";
+ reference
+ "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN
+ in the Packet Mode";
+ }
+ identity v11 {
+ base iana-interface-type;
+ description
+ "CCITT V.11/X.21.";
+ }
+ identity v36 {
+ base iana-interface-type;
+ description
+ "CCITT V.36.";
+ }
+ identity g703at64k {
+ base iana-interface-type;
+ description
+ "CCITT G703 at 64Kbps.";
+ }
+ identity g703at2mb {
+ base iana-interface-type;
+ status obsolete;
+ description
+ "Obsolete; see DS1-MIB.";
+ }
+ identity qllc {
+ base iana-interface-type;
+ description
+ "SNA QLLC.";
+ }
+ identity fastEtherFX {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Obsoleted via RFC 3635.
+ ethernetCsmacd(6) should be used instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity channel {
+ base iana-interface-type;
+ description
+ "Channel.";
+ }
+ identity ieee80211 {
+ base iana-interface-type;
+ description
+ "Radio spread spectrum.";
+ }
+ identity ibm370parChan {
+ base iana-interface-type;
+ description
+ "IBM System 360/370 OEMI Channel.";
+ }
+ identity escon {
+ base iana-interface-type;
+ description
+ "IBM Enterprise Systems Connection.";
+ }
+ identity dlsw {
+ base iana-interface-type;
+ description
+ "Data Link Switching.";
+ }
+ identity isdns {
+ base iana-interface-type;
+ description
+ "ISDN S/T interface.";
+ }
+ identity isdnu {
+ base iana-interface-type;
+ description
+ "ISDN U interface.";
+ }
+ identity lapd {
+ base iana-interface-type;
+ description
+ "Link Access Protocol D.";
+ }
+ identity ipSwitch {
+ base iana-interface-type;
+ description
+ "IP Switching Objects.";
+ }
+ identity rsrb {
+ base iana-interface-type;
+ description
+ "Remote Source Route Bridging.";
+ }
+ identity atmLogical {
+ base iana-interface-type;
+ description
+ "ATM Logical Port.";
+ reference
+ "RFC 3606 - Definitions of Supplemental Managed Objects
+ for ATM Interface";
+ }
+ identity ds0 {
+ base iana-interface-type;
+ description
+ "Digital Signal Level 0.";
+ reference
+ "RFC 2494 - Definitions of Managed Objects for the DS0
+ and DS0 Bundle Interface Type";
+ }
+ identity ds0Bundle {
+ base iana-interface-type;
+ description
+ "Group of ds0s on the same ds1.";
+ reference
+ "RFC 2494 - Definitions of Managed Objects for the DS0
+ and DS0 Bundle Interface Type";
+ }
+ identity bsc {
+ base iana-interface-type;
+ description
+ "Bisynchronous Protocol.";
+ }
+ identity async {
+ base iana-interface-type;
+ description
+ "Asynchronous Protocol.";
+ }
+ identity cnr {
+ base iana-interface-type;
+ description
+ "Combat Net Radio.";
+ }
+ identity iso88025Dtr {
+ base iana-interface-type;
+ description
+ "ISO 802.5r DTR.";
+ }
+ identity eplrs {
+ base iana-interface-type;
+ description
+ "Ext Pos Loc Report Sys.";
+ }
+ identity arap {
+ base iana-interface-type;
+ description
+ "Appletalk Remote Access Protocol.";
+ }
+ identity propCnls {
+ base iana-interface-type;
+ description
+ "Proprietary Connectionless Protocol.";
+ }
+ identity hostPad {
+ base iana-interface-type;
+ description
+ "CCITT-ITU X.29 PAD Protocol.";
+ }
+ identity termPad {
+ base iana-interface-type;
+ description
+ "CCITT-ITU X.3 PAD Facility.";
+ }
+ identity frameRelayMPI {
+ base iana-interface-type;
+ description
+ "Multiproto Interconnect over FR.";
+ }
+ identity x213 {
+ base iana-interface-type;
+ description
+ "CCITT-ITU X213.";
+ }
+ identity adsl {
+ base iana-interface-type;
+ description
+ "Asymmetric Digital Subscriber Loop.";
+ }
+ identity radsl {
+ base iana-interface-type;
+ description
+ "Rate-Adapt. Digital Subscriber Loop.";
+ }
+ identity sdsl {
+ base iana-interface-type;
+ description
+ "Symmetric Digital Subscriber Loop.";
+ }
+ identity vdsl {
+ base iana-interface-type;
+ description
+ "Very H-Speed Digital Subscrib. Loop.";
+ }
+ identity iso88025CRFPInt {
+ base iana-interface-type;
+ description
+ "ISO 802.5 CRFP.";
+ }
+ identity myrinet {
+ base iana-interface-type;
+ description
+ "Myricom Myrinet.";
+ }
+ identity voiceEM {
+ base iana-interface-type;
+ description
+ "Voice recEive and transMit.";
+ }
+ identity voiceFXO {
+ base iana-interface-type;
+ description
+ "Voice Foreign Exchange Office.";
+ }
+ identity voiceFXS {
+ base iana-interface-type;
+ description
+ "Voice Foreign Exchange Station.";
+ }
+ identity voiceEncap {
+ base iana-interface-type;
+ description
+ "Voice encapsulation.";
+ }
+ identity voiceOverIp {
+ base iana-interface-type;
+ description
+ "Voice over IP encapsulation.";
+ }
+ identity atmDxi {
+ base iana-interface-type;
+ description
+ "ATM DXI.";
+ }
+ identity atmFuni {
+ base iana-interface-type;
+ description
+ "ATM FUNI.";
+ }
+ identity atmIma {
+ base iana-interface-type;
+ description
+ "ATM IMA.";
+ }
+ identity pppMultilinkBundle {
+ base iana-interface-type;
+ description
+ "PPP Multilink Bundle.";
+ }
+ identity ipOverCdlc {
+ base iana-interface-type;
+ description
+ "IBM ipOverCdlc.";
+ }
+ identity ipOverClaw {
+ base iana-interface-type;
+ description
+ "IBM Common Link Access to Workstn.";
+ }
+ identity stackToStack {
+ base iana-interface-type;
+ description
+ "IBM stackToStack.";
+ }
+ identity virtualIpAddress {
+ base iana-interface-type;
+ description
+ "IBM VIPA.";
+ }
+ identity mpc {
+ base iana-interface-type;
+ description
+ "IBM multi-protocol channel support.";
+ }
+ identity ipOverAtm {
+ base iana-interface-type;
+ description
+ "IBM ipOverAtm.";
+ reference
+ "RFC 2320 - Definitions of Managed Objects for Classical IP
+ and ARP Over ATM Using SMIv2 (IPOA-MIB)";
+ }
+ identity iso88025Fiber {
+ base iana-interface-type;
+ description
+ "ISO 802.5j Fiber Token Ring.";
+ }
+ identity tdlc {
+ base iana-interface-type;
+ description
+ "IBM twinaxial data link control.";
+ }
+ identity gigabitEthernet {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Obsoleted via RFC 3635.
+ ethernetCsmacd(6) should be used instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity hdlc {
+ base iana-interface-type;
+ description
+ "HDLC.";
+ }
+ identity lapf {
+ base iana-interface-type;
+ description
+ "LAP F.";
+ }
+ identity v37 {
+ base iana-interface-type;
+ description
+ "V.37.";
+ }
+ identity x25mlp {
+ base iana-interface-type;
+ description
+ "Multi-Link Protocol.";
+ }
+ identity x25huntGroup {
+ base iana-interface-type;
+ description
+ "X25 Hunt Group.";
+ }
+ identity transpHdlc {
+ base iana-interface-type;
+ description
+ "Transp HDLC.";
+ }
+ identity interleave {
+ base iana-interface-type;
+ description
+ "Interleave channel.";
+ }
+ identity fast {
+ base iana-interface-type;
+ description
+ "Fast channel.";
+ }
+ identity ip {
+ base iana-interface-type;
+ description
+ "IP (for APPN HPR in IP networks).";
+ }
+ identity docsCableMaclayer {
+ base iana-interface-type;
+ description
+ "CATV Mac Layer.";
+ }
+ identity docsCableDownstream {
+ base iana-interface-type;
+ description
+ "CATV Downstream interface.";
+ }
+ identity docsCableUpstream {
+ base iana-interface-type;
+ description
+ "CATV Upstream interface.";
+ }
+ identity a12MppSwitch {
+ base iana-interface-type;
+ description
+ "Avalon Parallel Processor.";
+ }
+ identity tunnel {
+ base iana-interface-type;
+ description
+ "Encapsulation interface.";
+ }
+ identity coffee {
+ base iana-interface-type;
+ description
+ "Coffee pot.";
+ reference
+ "RFC 2325 - Coffee MIB";
+ }
+ identity ces {
+ base iana-interface-type;
+ description
+ "Circuit Emulation Service.";
+ }
+ identity atmSubInterface {
+ base iana-interface-type;
+ description
+ "ATM Sub Interface.";
+ }
+ identity l2vlan {
+ base iana-interface-type;
+ description
+ "Layer 2 Virtual LAN using 802.1Q.";
+ }
+ identity l3ipvlan {
+ base iana-interface-type;
+ description
+ "Layer 3 Virtual LAN using IP.";
+ }
+ identity l3ipxvlan {
+ base iana-interface-type;
+ description
+ "Layer 3 Virtual LAN using IPX.";
+ }
+ identity digitalPowerline {
+ base iana-interface-type;
+ description
+ "IP over Power Lines.";
+ }
+ identity mediaMailOverIp {
+ base iana-interface-type;
+ description
+ "Multimedia Mail over IP.";
+ }
+ identity dtm {
+ base iana-interface-type;
+ description
+ "Dynamic synchronous Transfer Mode.";
+ }
+ identity dcn {
+ base iana-interface-type;
+ description
+ "Data Communications Network.";
+ }
+ identity ipForward {
+ base iana-interface-type;
+ description
+ "IP Forwarding Interface.";
+ }
+ identity msdsl {
+ base iana-interface-type;
+ description
+ "Multi-rate Symmetric DSL.";
+ }
+ identity ieee1394 {
+ base iana-interface-type;
+
+ description
+ "IEEE1394 High Performance Serial Bus.";
+ }
+ identity if-gsn {
+ base iana-interface-type;
+ description
+ "HIPPI-6400.";
+ }
+ identity dvbRccMacLayer {
+ base iana-interface-type;
+ description
+ "DVB-RCC MAC Layer.";
+ }
+ identity dvbRccDownstream {
+ base iana-interface-type;
+ description
+ "DVB-RCC Downstream Channel.";
+ }
+ identity dvbRccUpstream {
+ base iana-interface-type;
+ description
+ "DVB-RCC Upstream Channel.";
+ }
+ identity atmVirtual {
+ base iana-interface-type;
+ description
+ "ATM Virtual Interface.";
+ }
+ identity mplsTunnel {
+ base iana-interface-type;
+ description
+ "MPLS Tunnel Virtual Interface.";
+ }
+ identity srp {
+ base iana-interface-type;
+ description
+ "Spatial Reuse Protocol.";
+ }
+ identity voiceOverAtm {
+ base iana-interface-type;
+ description
+ "Voice over ATM.";
+ }
+ identity voiceOverFrameRelay {
+ base iana-interface-type;
+ description
+ "Voice Over Frame Relay.";
+ }
+ identity idsl {
+ base iana-interface-type;
+ description
+ "Digital Subscriber Loop over ISDN.";
+ }
+ identity compositeLink {
+ base iana-interface-type;
+ description
+ "Avici Composite Link Interface.";
+ }
+ identity ss7SigLink {
+ base iana-interface-type;
+ description
+ "SS7 Signaling Link.";
+ }
+ identity propWirelessP2P {
+ base iana-interface-type;
+ description
+ "Prop. P2P wireless interface.";
+ }
+ identity frForward {
+ base iana-interface-type;
+ description
+ "Frame Forward Interface.";
+ }
+ identity rfc1483 {
+ base iana-interface-type;
+ description
+ "Multiprotocol over ATM AAL5.";
+ reference
+ "RFC 1483 - Multiprotocol Encapsulation over ATM
+ Adaptation Layer 5";
+ }
+ identity usb {
+ base iana-interface-type;
+ description
+ "USB Interface.";
+ }
+ identity ieee8023adLag {
+ base iana-interface-type;
+ description
+ "IEEE 802.3ad Link Aggregate.";
+ }
+ identity bgppolicyaccounting {
+ base iana-interface-type;
+ description
+ "BGP Policy Accounting.";
+ }
+ identity frf16MfrBundle {
+ base iana-interface-type;
+ description
+ "FRF.16 Multilink Frame Relay.";
+ }
+ identity h323Gatekeeper {
+ base iana-interface-type;
+ description
+ "H323 Gatekeeper.";
+ }
+ identity h323Proxy {
+ base iana-interface-type;
+ description
+ "H323 Voice and Video Proxy.";
+ }
+ identity mpls {
+ base iana-interface-type;
+ description
+ "MPLS.";
+ }
+ identity mfSigLink {
+ base iana-interface-type;
+ description
+ "Multi-frequency signaling link.";
+ }
+ identity hdsl2 {
+ base iana-interface-type;
+ description
+ "High Bit-Rate DSL - 2nd generation.";
+ }
+ identity shdsl {
+ base iana-interface-type;
+ description
+ "Multirate HDSL2.";
+ }
+ identity ds1FDL {
+ base iana-interface-type;
+ description
+ "Facility Data Link (4Kbps) on a DS1.";
+ }
+ identity pos {
+ base iana-interface-type;
+ description
+ "Packet over SONET/SDH Interface.";
+ }
+ identity dvbAsiIn {
+ base iana-interface-type;
+ description
+ "DVB-ASI Input.";
+ }
+ identity dvbAsiOut {
+ base iana-interface-type;
+ description
+ "DVB-ASI Output.";
+ }
+ identity plc {
+ base iana-interface-type;
+ description
+ "Power Line Communications.";
+ }
+ identity nfas {
+ base iana-interface-type;
+ description
+ "Non-Facility Associated Signaling.";
+ }
+ identity tr008 {
+ base iana-interface-type;
+ description
+ "TR008.";
+ }
+ identity gr303RDT {
+ base iana-interface-type;
+ description
+ "Remote Digital Terminal.";
+ }
+ identity gr303IDT {
+ base iana-interface-type;
+ description
+ "Integrated Digital Terminal.";
+ }
+ identity isup {
+ base iana-interface-type;
+ description
+ "ISUP.";
+ }
+ identity propDocsWirelessMaclayer {
+ base iana-interface-type;
+ description
+ "Cisco proprietary Maclayer.";
+ }
+ identity propDocsWirelessDownstream {
+ base iana-interface-type;
+ description
+ "Cisco proprietary Downstream.";
+ }
+ identity propDocsWirelessUpstream {
+ base iana-interface-type;
+ description
+ "Cisco proprietary Upstream.";
+ }
+ identity hiperlan2 {
+ base iana-interface-type;
+ description
+ "HIPERLAN Type 2 Radio Interface.";
+ }
+ identity propBWAp2Mp {
+ base iana-interface-type;
+ description
+ "PropBroadbandWirelessAccesspt2Multipt (use of this value
+ for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f
+ is deprecated, and ieee80216WMAN(237) should be used
+ instead).";
+ }
+ identity sonetOverheadChannel {
+ base iana-interface-type;
+ description
+ "SONET Overhead Channel.";
+ }
+ identity digitalWrapperOverheadChannel {
+ base iana-interface-type;
+ description
+ "Digital Wrapper.";
+ }
+ identity aal2 {
+ base iana-interface-type;
+ description
+ "ATM adaptation layer 2.";
+ }
+ identity radioMAC {
+ base iana-interface-type;
+ description
+ "MAC layer over radio links.";
+ }
+ identity atmRadio {
+ base iana-interface-type;
+ description
+ "ATM over radio links.";
+ }
+ identity imt {
+ base iana-interface-type;
+ description
+ "Inter-Machine Trunks.";
+ }
+ identity mvl {
+ base iana-interface-type;
+ description
+ "Multiple Virtual Lines DSL.";
+ }
+ identity reachDSL {
+ base iana-interface-type;
+ description
+ "Long Reach DSL.";
+ }
+ identity frDlciEndPt {
+ base iana-interface-type;
+ description
+ "Frame Relay DLCI End Point.";
+ }
+ identity atmVciEndPt {
+ base iana-interface-type;
+ description
+ "ATM VCI End Point.";
+ }
+ identity opticalChannel {
+ base iana-interface-type;
+ description
+ "Optical Channel.";
+ }
+ identity opticalTransport {
+ base iana-interface-type;
+ description
+ "Optical Transport.";
+ }
+ identity propAtm {
+ base iana-interface-type;
+ description
+ "Proprietary ATM.";
+ }
+ identity voiceOverCable {
+ base iana-interface-type;
+ description
+ "Voice Over Cable Interface.";
+ }
+ identity infiniband {
+ base iana-interface-type;
+ description
+ "Infiniband.";
+ }
+ identity teLink {
+ base iana-interface-type;
+ description
+ "TE Link.";
+ }
+ identity q2931 {
+ base iana-interface-type;
+ description
+ "Q.2931.";
+ }
+ identity virtualTg {
+ base iana-interface-type;
+ description
+ "Virtual Trunk Group.";
+ }
+ identity sipTg {
+ base iana-interface-type;
+ description
+ "SIP Trunk Group.";
+ }
+ identity sipSig {
+ base iana-interface-type;
+ description
+ "SIP Signaling.";
+ }
+ identity docsCableUpstreamChannel {
+ base iana-interface-type;
+ description
+ "CATV Upstream Channel.";
+ }
+ identity econet {
+ base iana-interface-type;
+ description
+ "Acorn Econet.";
+ }
+ identity pon155 {
+ base iana-interface-type;
+ description
+ "FSAN 155Mb Symetrical PON interface.";
+ }
+ identity pon622 {
+ base iana-interface-type;
+ description
+ "FSAN 622Mb Symetrical PON interface.";
+ }
+ identity bridge {
+ base iana-interface-type;
+ description
+ "Transparent bridge interface.";
+ }
+ identity linegroup {
+ base iana-interface-type;
+ description
+ "Interface common to multiple lines.";
+ }
+ identity voiceEMFGD {
+ base iana-interface-type;
+ description
+ "Voice E&M Feature Group D.";
+ }
+ identity voiceFGDEANA {
+ base iana-interface-type;
+ description
+ "Voice FGD Exchange Access North American.";
+ }
+ identity voiceDID {
+ base iana-interface-type;
+ description
+ "Voice Direct Inward Dialing.";
+ }
+ identity mpegTransport {
+ base iana-interface-type;
+ description
+ "MPEG transport interface.";
+ }
+ identity sixToFour {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "6to4 interface (DEPRECATED).";
+ reference
+ "RFC 4087 - IP Tunnel MIB";
+ }
+ identity gtp {
+ base iana-interface-type;
+ description
+ "GTP (GPRS Tunneling Protocol).";
+ }
+ identity pdnEtherLoop1 {
+ base iana-interface-type;
+ description
+ "Paradyne EtherLoop 1.";
+ }
+ identity pdnEtherLoop2 {
+ base iana-interface-type;
+ description
+ "Paradyne EtherLoop 2.";
+ }
+ identity opticalChannelGroup {
+ base iana-interface-type;
+ description
+ "Optical Channel Group.";
+ }
+ identity homepna {
+ base iana-interface-type;
+ description
+ "HomePNA ITU-T G.989.";
+ }
+ identity gfp {
+ base iana-interface-type;
+ description
+ "Generic Framing Procedure (GFP).";
+ }
+ identity ciscoISLvlan {
+ base iana-interface-type;
+ description
+ "Layer 2 Virtual LAN using Cisco ISL.";
+ }
+ identity actelisMetaLOOP {
+ base iana-interface-type;
+ description
+ "Acteleis proprietary MetaLOOP High Speed Link.";
+ }
+ identity fcipLink {
+ base iana-interface-type;
+ description
+ "FCIP Link.";
+ }
+ identity rpr {
+ base iana-interface-type;
+ description
+ "Resilient Packet Ring Interface Type.";
+ }
+ identity qam {
+ base iana-interface-type;
+ description
+ "RF Qam Interface.";
+ }
+ identity lmp {
+ base iana-interface-type;
+ description
+ "Link Management Protocol.";
+ reference
+ "RFC 4327 - Link Management Protocol (LMP) Management
+ Information Base (MIB)";
+ }
+ identity cblVectaStar {
+ base iana-interface-type;
+ description
+ "Cambridge Broadband Networks Limited VectaStar.";
+ }
+ identity docsCableMCmtsDownstream {
+ base iana-interface-type;
+ description
+ "CATV Modular CMTS Downstream Interface.";
+ }
+ identity adsl2 {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Asymmetric Digital Subscriber Loop Version 2
+ (DEPRECATED/OBSOLETED - please use adsl2plus(238)
+ instead).";
+ reference
+ "RFC 4706 - Definitions of Managed Objects for Asymmetric
+ Digital Subscriber Line 2 (ADSL2)";
+ }
+ identity macSecControlledIF {
+ base iana-interface-type;
+ description
+ "MACSecControlled.";
+ }
+ identity macSecUncontrolledIF {
+ base iana-interface-type;
+ description
+ "MACSecUncontrolled.";
+ }
+ identity aviciOpticalEther {
+ base iana-interface-type;
+ description
+ "Avici Optical Ethernet Aggregate.";
+ }
+ identity atmbond {
+ base iana-interface-type;
+ description
+ "atmbond.";
+ }
+ identity voiceFGDOS {
+ base iana-interface-type;
+ description
+ "Voice FGD Operator Services.";
+ }
+ identity mocaVersion1 {
+ base iana-interface-type;
+ description
+ "MultiMedia over Coax Alliance (MoCA) Interface
+ as documented in information provided privately to IANA.";
+ }
+ identity ieee80216WMAN {
+ base iana-interface-type;
+ description
+ "IEEE 802.16 WMAN interface.";
+ }
+ identity adsl2plus {
+ base iana-interface-type;
+ description
+ "Asymmetric Digital Subscriber Loop Version 2 -
+ Version 2 Plus and all variants.";
+ }
+ identity dvbRcsMacLayer {
+ base iana-interface-type;
+ description
+ "DVB-RCS MAC Layer.";
+ reference
+ "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+ }
+ identity dvbTdm {
+ base iana-interface-type;
+ description
+ "DVB Satellite TDM.";
+ reference
+ "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+ }
+ identity dvbRcsTdma {
+ base iana-interface-type;
+ description
+ "DVB-RCS TDMA.";
+ reference
+ "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+ }
+ identity x86Laps {
+ base iana-interface-type;
+ description
+ "LAPS based on ITU-T X.86/Y.1323.";
+ }
+ identity wwanPP {
+ base iana-interface-type;
+ description
+ "3GPP WWAN.";
+ }
+ identity wwanPP2 {
+ base iana-interface-type;
+ description
+ "3GPP2 WWAN.";
+ }
+ identity voiceEBS {
+ base iana-interface-type;
+ description
+ "Voice P-phone EBS physical interface.";
+ }
+ identity ifPwType {
+ base iana-interface-type;
+ description
+ "Pseudowire interface type.";
+ reference
+ "RFC 5601 - Pseudowire (PW) Management Information Base (MIB)";
+ }
+ identity ilan {
+ base iana-interface-type;
+ description
+ "Internal LAN on a bridge per IEEE 802.1ap.";
+ }
+ identity pip {
+ base iana-interface-type;
+ description
+ "Provider Instance Port on a bridge per IEEE 802.1ah PBB.";
+ }
+ identity aluELP {
+ base iana-interface-type;
+ description
+ "Alcatel-Lucent Ethernet Link Protection.";
+ }
+ identity gpon {
+ base iana-interface-type;
+ description
+ "Gigabit-capable passive optical networks (G-PON) as per
+ ITU-T G.948.";
+ }
+ identity vdsl2 {
+ base iana-interface-type;
+ description
+ "Very high speed digital subscriber line Version 2
+ (as per ITU-T Recommendation G.993.2).";
+ reference
+ "RFC 5650 - Definitions of Managed Objects for Very High
+ Speed Digital Subscriber Line 2 (VDSL2)";
+ }
+ identity capwapDot11Profile {
+ base iana-interface-type;
+ description
+ "WLAN Profile Interface.";
+ reference
+ "RFC 5834 - Control and Provisioning of Wireless Access
+ Points (CAPWAP) Protocol Binding MIB for
+ IEEE 802.11";
+ }
+ identity capwapDot11Bss {
+ base iana-interface-type;
+ description
+ "WLAN BSS Interface.";
+ reference
+ "RFC 5834 - Control and Provisioning of Wireless Access
+ Points (CAPWAP) Protocol Binding MIB for
+ IEEE 802.11";
+ }
+ identity capwapWtpVirtualRadio {
+ base iana-interface-type;
+ description
+ "WTP Virtual Radio Interface.";
+ reference
+ "RFC 5833 - Control and Provisioning of Wireless Access
+ Points (CAPWAP) Protocol Base MIB";
+ }
+ identity bits {
+ base iana-interface-type;
+ description
+ "bitsport.";
+ }
+ identity docsCableUpstreamRfPort {
+ base iana-interface-type;
+ description
+ "DOCSIS CATV Upstream RF Port.";
+ }
+ identity cableDownstreamRfPort {
+ base iana-interface-type;
+ description
+ "CATV downstream RF Port.";
+ }
+ identity vmwareVirtualNic {
+ base iana-interface-type;
+ description
+ "VMware Virtual Network Interface.";
+ }
+ identity ieee802154 {
+ base iana-interface-type;
+ description
+ "IEEE 802.15.4 WPAN interface.";
+ reference
+ "IEEE 802.15.4-2006";
+ }
+ identity otnOdu {
+ base iana-interface-type;
+ description
+ "OTN Optical Data Unit.";
+ }
+ identity otnOtu {
+ base iana-interface-type;
+ description
+ "OTN Optical channel Transport Unit.";
+ }
+ identity ifVfiType {
+ base iana-interface-type;
+ description
+ "VPLS Forwarding Instance Interface Type.";
+ }
+ identity g9981 {
+ base iana-interface-type;
+ description
+ "G.998.1 bonded interface.";
+ }
+ identity g9982 {
+ base iana-interface-type;
+ description
+ "G.998.2 bonded interface.";
+ }
+ identity g9983 {
+ base iana-interface-type;
+ description
+ "G.998.3 bonded interface.";
+ }
+
+ identity aluEpon {
+ base iana-interface-type;
+ description
+ "Ethernet Passive Optical Networks (E-PON).";
+ }
+ identity aluEponOnu {
+ base iana-interface-type;
+ description
+ "EPON Optical Network Unit.";
+ }
+ identity aluEponPhysicalUni {
+ base iana-interface-type;
+ description
+ "EPON physical User to Network interface.";
+ }
+ identity aluEponLogicalLink {
+ base iana-interface-type;
+ description
+ "The emulation of a point-to-point link over the EPON
+ layer.";
+ }
+ identity aluGponOnu {
+ base iana-interface-type;
+ description
+ "GPON Optical Network Unit.";
+ reference
+ "ITU-T G.984.2";
+ }
+ identity aluGponPhysicalUni {
+ base iana-interface-type;
+ description
+ "GPON physical User to Network interface.";
+ reference
+ "ITU-T G.984.2";
+ }
+ identity vmwareNicTeam {
+ base iana-interface-type;
+ description
+ "VMware NIC Team.";
+ }
+ identity docsOfdmDownstream {
+ base iana-interface-type;
+ description
+ "CATV Downstream OFDM interface.";
+ }
+ identity docsOfdmaUpstream {
+ base iana-interface-type;
+ description
+ "CATV Upstream OFDMA interface.";
+ }
+ identity gfast {
+ base iana-interface-type;
+ description
+ "G.fast port.";
+ reference
+ "ITU-T G.9701";
+ }
+ identity sdci {
+ base iana-interface-type;
+ description
+ "SDCI (IO-Link).";
+ reference
+ "IEC 61131-9 Edition 1.0 2013-09";
+ }
+ identity xboxWireless {
+ base iana-interface-type;
+ description
+ "Xbox wireless.";
+ }
+ identity fastdsl {
+ base iana-interface-type;
+ description
+ "FastDSL.";
+ reference
+ "BBF TR-355";
+ }
+ identity docsCableScte55d1FwdOob {
+ base iana-interface-type;
+ description
+ "Cable SCTE 55-1 OOB Forward Channel.";
+ }
+ identity docsCableScte55d1RetOob {
+ base iana-interface-type;
+ description
+ "Cable SCTE 55-1 OOB Return Channel.";
+ }
+ identity docsCableScte55d2DsOob {
+ base iana-interface-type;
+ description
+ "Cable SCTE 55-2 OOB Downstream Channel.";
+ }
+ identity docsCableScte55d2UsOob {
+ base iana-interface-type;
+ description
+ "Cable SCTE 55-2 OOB Upstream Channel.";
+ }
+ identity docsCableNdf {
+ base iana-interface-type;
+ description
+ "Cable Narrowband Digital Forward.";
+ }
+ identity docsCableNdr {
+ base iana-interface-type;
+ description
+ "Cable Narrowband Digital Return.";
+ }
+ identity ptm {
+ base iana-interface-type;
+ description
+ "Packet Transfer Mode.";
+ }
+ identity ghn {
+ base iana-interface-type;
+ description
+ "G.hn port.";
+ }
+}
diff --git a/models/openconfig/src/main/yang/comm/ietf-inet-types.yang b/models/openconfig/src/main/yang/comm/ietf-inet-types.yang
new file mode 100644
index 0000000..2b7ed38
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/ietf-inet-types.yang
@@ -0,0 +1,454 @@
+ module ietf-inet-types {
+
+ yang-version 1;
+
+ namespace
+ "urn:ietf:params:xml:ns:yang:ietf-inet-types";
+
+ prefix inet;
+
+ organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+
+ WG Chair: David Kessens
+ <mailto:david.kessens@nsn.com>
+
+ WG Chair: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+
+ Editor: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>";
+
+ description
+ "This module contains a collection of generally useful derived
+ YANG data types for Internet addresses and related things.
+
+ Copyright (c) 2013 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 6991; see
+ the RFC itself for full legal notices.";
+
+ revision "2013-07-15" {
+ description
+ "This revision adds the following new data types:
+ - ip-address-no-zone
+ - ipv4-address-no-zone
+ - ipv6-address-no-zone";
+ reference
+ "RFC 6991: Common YANG Data Types";
+
+ }
+
+ revision "2010-09-24" {
+ description "Initial revision.";
+ reference
+ "RFC 6021: Common YANG Data Types";
+
+ }
+
+
+ typedef ip-version {
+ type enumeration {
+ enum "unknown" {
+ value 0;
+ description
+ "An unknown or unspecified version of the Internet
+ protocol.";
+ }
+ enum "ipv4" {
+ value 1;
+ description
+ "The IPv4 protocol as defined in RFC 791.";
+ }
+ enum "ipv6" {
+ value 2;
+ description
+ "The IPv6 protocol as defined in RFC 2460.";
+ }
+ }
+ description
+ "This value represents the version of the IP protocol.
+
+ In the value set and its semantics, this type is equivalent
+ to the InetVersion textual convention of the SMIv2.";
+ reference
+ "RFC 791: Internet Protocol
+ RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+ RFC 4001: Textual Conventions for Internet Network Addresses";
+
+ }
+
+ typedef dscp {
+ type uint8 {
+ range "0..63";
+ }
+ description
+ "The dscp type represents a Differentiated Services Code Point
+ that may be used for marking packets in a traffic stream.
+ In the value set and its semantics, this type is equivalent
+ to the Dscp textual convention of the SMIv2.";
+ reference
+ "RFC 3289: Management Information Base for the Differentiated
+ Services Architecture
+ RFC 2474: Definition of the Differentiated Services Field
+ (DS Field) in the IPv4 and IPv6 Headers
+ RFC 2780: IANA Allocation Guidelines For Values In
+ the Internet Protocol and Related Headers";
+
+ }
+
+ typedef ipv6-flow-label {
+ type uint32 {
+ range "0..1048575";
+ }
+ description
+ "The ipv6-flow-label type represents the flow identifier or Flow
+ Label in an IPv6 packet header that may be used to
+ discriminate traffic flows.
+
+ In the value set and its semantics, this type is equivalent
+ to the IPv6FlowLabel textual convention of the SMIv2.";
+ reference
+ "RFC 3595: Textual Conventions for IPv6 Flow Label
+ RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
+
+ }
+
+ typedef port-number {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "The port-number type represents a 16-bit port number of an
+ Internet transport-layer protocol such as UDP, TCP, DCCP, or
+ SCTP. Port numbers are assigned by IANA. A current list of
+ all assignments is available from <http://www.iana.org/>.
+
+ Note that the port number value zero is reserved by IANA. In
+ situations where the value zero does not make sense, it can
+ be excluded by subtyping the port-number type.
+ In the value set and its semantics, this type is equivalent
+ to the InetPortNumber textual convention of the SMIv2.";
+ reference
+ "RFC 768: User Datagram Protocol
+ RFC 793: Transmission Control Protocol
+ RFC 4960: Stream Control Transmission Protocol
+ RFC 4340: Datagram Congestion Control Protocol (DCCP)
+ RFC 4001: Textual Conventions for Internet Network Addresses";
+
+ }
+
+ typedef as-number {
+ type uint32;
+ description
+ "The as-number type represents autonomous system numbers
+ which identify an Autonomous System (AS). An AS is a set
+ of routers under a single technical administration, using
+ an interior gateway protocol and common metrics to route
+ packets within the AS, and using an exterior gateway
+ protocol to route packets to other ASes. IANA maintains
+ the AS number space and has delegated large parts to the
+ regional registries.
+
+ Autonomous system numbers were originally limited to 16
+ bits. BGP extensions have enlarged the autonomous system
+ number space to 32 bits. This type therefore uses an uint32
+ base type without a range restriction in order to support
+ a larger autonomous system number space.
+
+ In the value set and its semantics, this type is equivalent
+ to the InetAutonomousSystemNumber textual convention of
+ the SMIv2.";
+ reference
+ "RFC 1930: Guidelines for creation, selection, and registration
+ of an Autonomous System (AS)
+ RFC 4271: A Border Gateway Protocol 4 (BGP-4)
+ RFC 4001: Textual Conventions for Internet Network Addresses
+ RFC 6793: BGP Support for Four-Octet Autonomous System (AS)
+ Number Space";
+
+ }
+
+ typedef ip-address {
+ type union {
+ type ipv4-address;
+ type ipv6-address;
+ }
+ description
+ "The ip-address type represents an IP address and is IP
+ version neutral. The format of the textual representation
+ implies the IP version. This type supports scoped addresses
+ by allowing zone identifiers in the address format.";
+ reference
+ "RFC 4007: IPv6 Scoped Address Architecture";
+
+ }
+
+ typedef ipv4-address {
+ type string {
+ pattern
+ '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?';
+ }
+ description
+ "The ipv4-address type represents an IPv4 address in
+ dotted-quad notation. The IPv4 address may include a zone
+ index, separated by a % sign.
+
+ The zone index is used to disambiguate identical address
+ values. For link-local addresses, the zone index will
+ typically be the interface index number or the name of an
+ interface. If the zone index is not present, the default
+ zone of the device will be used.
+
+ The canonical format for the zone index is the numerical
+ format";
+ }
+
+ typedef ipv6-address {
+ type string {
+ pattern
+ '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(%[\p{N}\p{L}]+)?';
+ pattern
+ '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)(%.+)?';
+ }
+ description
+ "The ipv6-address type represents an IPv6 address in full,
+ mixed, shortened, and shortened-mixed notation. The IPv6
+ address may include a zone index, separated by a % sign.
+
+ The zone index is used to disambiguate identical address
+ values. For link-local addresses, the zone index will
+ typically be the interface index number or the name of an
+ interface. If the zone index is not present, the default
+ zone of the device will be used.
+
+
+
+ The canonical format of IPv6 addresses uses the textual
+ representation defined in Section 4 of RFC 5952. The
+ canonical format for the zone index is the numerical
+ format as described in Section 11.2 of RFC 4007.";
+ reference
+ "RFC 4291: IP Version 6 Addressing Architecture
+ RFC 4007: IPv6 Scoped Address Architecture
+ RFC 5952: A Recommendation for IPv6 Address Text
+ Representation";
+
+ }
+
+ typedef ip-address-no-zone {
+ type union {
+ type ipv4-address-no-zone;
+ type ipv6-address-no-zone;
+ }
+ description
+ "The ip-address-no-zone type represents an IP address and is
+ IP version neutral. The format of the textual representation
+ implies the IP version. This type does not support scoped
+ addresses since it does not allow zone identifiers in the
+ address format.";
+ reference
+ "RFC 4007: IPv6 Scoped Address Architecture";
+
+ }
+
+ typedef ipv4-address-no-zone {
+ type ipv4-address {
+ pattern '[0-9\.]*';
+ }
+ description
+ "An IPv4 address without a zone index. This type, derived from
+ ipv4-address, may be used in situations where the zone is
+ known from the context and hence no zone index is needed.";
+ }
+
+ typedef ipv6-address-no-zone {
+ type ipv6-address {
+ pattern '[0-9a-fA-F:\.]*';
+ }
+ description
+ "An IPv6 address without a zone index. This type, derived from
+ ipv6-address, may be used in situations where the zone is
+ known from the context and hence no zone index is needed.";
+ reference
+ "RFC 4291: IP Version 6 Addressing Architecture
+ RFC 4007: IPv6 Scoped Address Architecture
+ RFC 5952: A Recommendation for IPv6 Address Text
+ Representation";
+
+ }
+
+ typedef ip-prefix {
+ type union {
+ type ipv4-prefix;
+ type ipv6-prefix;
+ }
+ description
+ "The ip-prefix type represents an IP prefix and is IP
+ version neutral. The format of the textual representations
+ implies the IP version.";
+ }
+
+ typedef ipv4-prefix {
+ type string {
+ pattern
+ '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])/(([0-9])|([1-2][0-9])|(3[0-2]))';
+ }
+ description
+ "The ipv4-prefix type represents an IPv4 address prefix.
+ The prefix length is given by the number following the
+ slash character and must be less than or equal to 32.
+
+ A prefix length value of n corresponds to an IP address
+ mask that has n contiguous 1-bits from the most
+ significant bit (MSB) and all other bits set to 0.
+
+ The canonical format of an IPv4 prefix has all bits of
+ the IPv4 address set to zero that are not part of the
+ IPv4 prefix.";
+ }
+
+ typedef ipv6-prefix {
+ type string {
+ pattern
+ '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
+ pattern
+ '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)(/.+)';
+ }
+ description
+ "The ipv6-prefix type represents an IPv6 address prefix.
+ The prefix length is given by the number following the
+ slash character and must be less than or equal to 128.
+
+ A prefix length value of n corresponds to an IP address
+ mask that has n contiguous 1-bits from the most
+ significant bit (MSB) and all other bits set to 0.
+
+ The IPv6 address should have all bits that do not belong
+ to the prefix set to zero.
+
+ The canonical format of an IPv6 prefix has all bits of
+ the IPv6 address set to zero that are not part of the
+ IPv6 prefix. Furthermore, the IPv6 address is represented
+ as defined in Section 4 of RFC 5952.";
+ reference
+ "RFC 5952: A Recommendation for IPv6 Address Text
+ Representation";
+
+ }
+
+ typedef domain-name {
+ type string {
+ length "1..253";
+ pattern
+ '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)|\.';
+ }
+ description
+ "The domain-name type represents a DNS domain name. The
+ name SHOULD be fully qualified whenever possible.
+
+ Internet domain names are only loosely specified. Section
+ 3.5 of RFC 1034 recommends a syntax (modified in Section
+ 2.1 of RFC 1123). The pattern above is intended to allow
+ for current practice in domain name use, and some possible
+ future expansion. It is designed to hold various types of
+ domain names, including names used for A or AAAA records
+ (host names) and other records, such as SRV records. Note
+ that Internet host names have a stricter syntax (described
+ in RFC 952) than the DNS recommendations in RFCs 1034 and
+ 1123, and that systems that want to store host names in
+ schema nodes using the domain-name type are recommended to
+ adhere to this stricter standard to ensure interoperability.
+
+ The encoding of DNS names in the DNS protocol is limited
+ to 255 characters. Since the encoding consists of labels
+ prefixed by a length bytes and there is a trailing NULL
+ byte, only 253 characters can appear in the textual dotted
+ notation.
+
+ The description clause of schema nodes using the domain-name
+ type MUST describe when and how these names are resolved to
+ IP addresses. Note that the resolution of a domain-name value
+ may require to query multiple DNS records (e.g., A for IPv4
+ and AAAA for IPv6). The order of the resolution process and
+ which DNS record takes precedence can either be defined
+ explicitly or may depend on the configuration of the
+ resolver.
+
+ Domain-name values use the US-ASCII encoding. Their canonical
+ format uses lowercase US-ASCII characters. Internationalized
+ domain names MUST be A-labels as per RFC 5890.";
+ reference
+ "RFC 952: DoD Internet Host Table Specification
+ RFC 1034: Domain Names - Concepts and Facilities
+ RFC 1123: Requirements for Internet Hosts -- Application
+ and Support
+ RFC 2782: A DNS RR for specifying the location of services
+ (DNS SRV)
+ RFC 5890: Internationalized Domain Names in Applications
+ (IDNA): Definitions and Document Framework";
+
+ }
+
+ typedef host {
+ type union {
+ type ip-address;
+ type domain-name;
+ }
+ description
+ "The host type represents either an IP address or a DNS
+ domain name.";
+ }
+
+ typedef uri {
+ type string;
+ description
+ "The uri type represents a Uniform Resource Identifier
+ (URI) as defined by STD 66.
+
+ Objects using the uri type MUST be in US-ASCII encoding,
+ and MUST be normalized as described by RFC 3986 Sections
+ 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary
+ percent-encoding is removed, and all case-insensitive
+ characters are set to lowercase except for hexadecimal
+ digits, which are normalized to uppercase as described in
+ Section 6.2.2.1.
+
+ The purpose of this normalization is to help provide
+ unique URIs. Note that this normalization is not
+ sufficient to provide uniqueness. Two URIs that are
+ textually distinct after this normalization may still be
+ equivalent.
+
+ Objects using the uri type may restrict the schemes that
+ they permit. For example, 'data:' and 'urn:' schemes
+ might not be appropriate.
+
+ A zero-length URI is not a valid URI. This can be used to
+ express 'URI absent' where required.
+
+ In the value set and its semantics, this type is equivalent
+ to the Uri SMIv2 textual convention defined in RFC 5017.";
+ reference
+ "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
+ RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
+ Group: Uniform Resource Identifiers (URIs), URLs,
+ and Uniform Resource Names (URNs): Clarifications
+ and Recommendations
+ RFC 5017: MIB Textual Conventions for Uniform Resource
+ Identifiers (URIs)";
+
+ }
+ } // module ietf-inet-types
diff --git a/models/openconfig/src/main/yang/comm/ietf-interfaces.yang b/models/openconfig/src/main/yang/comm/ietf-interfaces.yang
new file mode 100644
index 0000000..d02aca2
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/ietf-interfaces.yang
@@ -0,0 +1,703 @@
+module ietf-interfaces {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces";
+ prefix if;
+
+ import ietf-yang-types {
+ prefix yang;
+ }
+
+ organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+
+ WG Chair: Thomas Nadeau
+ <mailto:tnadeau@lucidvision.com>
+
+ WG Chair: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+
+ Editor: Martin Bjorklund
+ <mailto:mbj@tail-f.com>";
+
+ description
+ "This module contains a collection of YANG definitions for
+ managing network interfaces.
+
+ Copyright (c) 2014 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 7223; see
+ the RFC itself for full legal notices.";
+
+ revision 2014-05-08 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 7223: A YANG Data Model for Interface Management";
+ }
+
+ /*
+ * Typedefs
+ */
+
+ typedef interface-ref {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description
+ "This type is used by data models that need to reference
+ configured interfaces.";
+ }
+
+ typedef interface-state-ref {
+ type leafref {
+ path "/if:interfaces-state/if:interface/if:name";
+ }
+ description
+ "This type is used by data models that need to reference
+ the operationally present interfaces.";
+ }
+
+ /*
+ * Identities
+ */
+
+ identity interface-type {
+ description
+ "Base identity from which specific interface types are
+ derived.";
+ }
+
+ /*
+ * Features
+ */
+
+ feature arbitrary-names {
+ description
+ "This feature indicates that the device allows user-controlled
+ interfaces to be named arbitrarily.";
+ }
+
+
+ feature pre-provisioning {
+ description
+ "This feature indicates that the device supports
+ pre-provisioning of interface configuration, i.e., it is
+ possible to configure an interface whose physical interface
+ hardware is not present on the device.";
+ }
+
+ feature if-mib {
+ description
+ "This feature indicates that the device implements
+ the IF-MIB.";
+ reference
+ "RFC 2863: The Interfaces Group MIB";
+ }
+
+ /*
+ * Configuration data nodes
+ */
+
+ container interfaces {
+ description
+ "Interface configuration parameters.";
+
+ list interface {
+ key "name";
+
+ description
+ "The list of configured interfaces on the device.
+
+ The operational state of an interface is available in the
+ /interfaces-state/interface list. If the configuration of a
+ system-controlled interface cannot be used by the system
+ (e.g., the interface hardware present does not match the
+ interface type), then the configuration is not applied to
+ the system-controlled interface shown in the
+ /interfaces-state/interface list. If the configuration
+ of a user-controlled interface cannot be used by the system,
+ the configured interface is not instantiated in the
+ /interfaces-state/interface list.";
+
+ leaf name {
+ type string;
+ description
+ "The name of the interface.
+
+ A device MAY restrict the allowed values for this leaf,
+ possibly depending on the type of the interface.
+
+
+ For system-controlled interfaces, this leaf is the
+ device-specific name of the interface. The 'config false'
+ list /interfaces-state/interface contains the currently
+ existing interfaces on the device.
+
+ If a client tries to create configuration for a
+ system-controlled interface that is not present in the
+ /interfaces-state/interface list, the server MAY reject
+ the request if the implementation does not support
+ pre-provisioning of interfaces or if the name refers to
+ an interface that can never exist in the system. A
+ NETCONF server MUST reply with an rpc-error with the
+ error-tag 'invalid-value' in this case.
+
+ If the device supports pre-provisioning of interface
+ configuration, the 'pre-provisioning' feature is
+ advertised.
+
+ If the device allows arbitrarily named user-controlled
+ interfaces, the 'arbitrary-names' feature is advertised.
+
+ When a configured user-controlled interface is created by
+ the system, it is instantiated with the same name in the
+ /interface-state/interface list.";
+ }
+
+ leaf description {
+ type string;
+ description
+ "A textual description of the interface.
+
+ A server implementation MAY map this leaf to the ifAlias
+ MIB object. Such an implementation needs to use some
+ mechanism to handle the differences in size and characters
+ allowed between this leaf and ifAlias. The definition of
+ such a mechanism is outside the scope of this document.
+
+ Since ifAlias is defined to be stored in non-volatile
+ storage, the MIB implementation MUST map ifAlias to the
+ value of 'description' in the persistently stored
+ datastore.
+
+ Specifically, if the device supports ':startup', when
+ ifAlias is read the device MUST return the value of
+ 'description' in the 'startup' datastore, and when it is
+ written, it MUST be written to the 'running' and 'startup'
+ datastores. Note that it is up to the implementation to
+
+ decide whether to modify this single leaf in 'startup' or
+ perform an implicit copy-config from 'running' to
+ 'startup'.
+
+ If the device does not support ':startup', ifAlias MUST
+ be mapped to the 'description' leaf in the 'running'
+ datastore.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifAlias";
+ }
+
+ leaf type {
+ type identityref {
+ base interface-type;
+ }
+ mandatory true;
+ description
+ "The type of the interface.
+
+ When an interface entry is created, a server MAY
+ initialize the type leaf with a valid value, e.g., if it
+ is possible to derive the type from the name of the
+ interface.
+
+ If a client tries to set the type of an interface to a
+ value that can never be used by the system, e.g., if the
+ type is not supported or if the type does not match the
+ name of the interface, the server MUST reject the request.
+ A NETCONF server MUST reply with an rpc-error with the
+ error-tag 'invalid-value' in this case.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifType";
+ }
+
+ leaf enabled {
+ type boolean;
+ default "true";
+ description
+ "This leaf contains the configured, desired state of the
+ interface.
+
+ Systems that implement the IF-MIB use the value of this
+ leaf in the 'running' datastore to set
+ IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry
+ has been initialized, as described in RFC 2863.
+
+ Changes in this leaf in the 'running' datastore are
+ reflected in ifAdminStatus, but if ifAdminStatus is
+ changed over SNMP, this leaf is not affected.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+ }
+
+ leaf link-up-down-trap-enable {
+ if-feature if-mib;
+ type enumeration {
+ enum enabled {
+ value 1;
+ }
+ enum disabled {
+ value 2;
+ }
+ }
+ description
+ "Controls whether linkUp/linkDown SNMP notifications
+ should be generated for this interface.
+
+ If this node is not configured, the value 'enabled' is
+ operationally used by the server for interfaces that do
+ not operate on top of any other interface (i.e., there are
+ no 'lower-layer-if' entries), and 'disabled' otherwise.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifLinkUpDownTrapEnable";
+ }
+ }
+ }
+
+ /*
+ * Operational state data nodes
+ */
+
+ container interfaces-state {
+ config false;
+ description
+ "Data nodes for the operational state of interfaces.";
+
+ list interface {
+ key "name";
+
+ description
+ "The list of interfaces on the device.
+
+ System-controlled interfaces created by the system are
+ always present in this list, whether they are configured or
+ not.";
+
+ leaf name {
+ type string;
+ description
+ "The name of the interface.
+
+ A server implementation MAY map this leaf to the ifName
+ MIB object. Such an implementation needs to use some
+ mechanism to handle the differences in size and characters
+ allowed between this leaf and ifName. The definition of
+ such a mechanism is outside the scope of this document.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifName";
+ }
+
+ leaf type {
+ type identityref {
+ base interface-type;
+ }
+ mandatory true;
+ description
+ "The type of the interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifType";
+ }
+
+ leaf admin-status {
+ if-feature if-mib;
+ type enumeration {
+ enum up {
+ value 1;
+ description
+ "Ready to pass packets.";
+ }
+ enum down {
+ value 2;
+ description
+ "Not ready to pass packets and not in some test mode.";
+ }
+
+ enum testing {
+ value 3;
+ description
+ "In some test mode.";
+ }
+ }
+ mandatory true;
+ description
+ "The desired state of the interface.
+
+ This leaf has the same read semantics as ifAdminStatus.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+ }
+
+ leaf oper-status {
+ type enumeration {
+ enum up {
+ value 1;
+ description
+ "Ready to pass packets.";
+ }
+ enum down {
+ value 2;
+ description
+ "The interface does not pass any packets.";
+ }
+ enum testing {
+ value 3;
+ description
+ "In some test mode. No operational packets can
+ be passed.";
+ }
+ enum unknown {
+ value 4;
+ description
+ "Status cannot be determined for some reason.";
+ }
+ enum dormant {
+ value 5;
+ description
+ "Waiting for some external event.";
+ }
+ enum not-present {
+ value 6;
+ description
+ "Some component (typically hardware) is missing.";
+ }
+
+ enum lower-layer-down {
+ value 7;
+ description
+ "Down due to state of lower-layer interface(s).";
+ }
+ }
+ mandatory true;
+ description
+ "The current operational state of the interface.
+
+ This leaf has the same semantics as ifOperStatus.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifOperStatus";
+ }
+
+ leaf last-change {
+ type yang:date-and-time;
+ description
+ "The time the interface entered its current operational
+ state. If the current state was entered prior to the
+ last re-initialization of the local network management
+ subsystem, then this node is not present.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifLastChange";
+ }
+
+ leaf if-index {
+ if-feature if-mib;
+ type int32 {
+ range "1..2147483647";
+ }
+ mandatory true;
+ description
+ "The ifIndex value for the ifEntry represented by this
+ interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifIndex";
+ }
+
+ leaf phys-address {
+ type yang:phys-address;
+ description
+ "The interface's address at its protocol sub-layer. For
+ example, for an 802.x interface, this object normally
+ contains a Media Access Control (MAC) address. The
+ interface's media-specific modules must define the bit
+
+
+ and byte ordering and the format of the value of this
+ object. For interfaces that do not have such an address
+ (e.g., a serial line), this node is not present.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifPhysAddress";
+ }
+
+ leaf-list higher-layer-if {
+ type interface-state-ref;
+ description
+ "A list of references to interfaces layered on top of this
+ interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifStackTable";
+ }
+
+ leaf-list lower-layer-if {
+ type interface-state-ref;
+ description
+ "A list of references to interfaces layered underneath this
+ interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifStackTable";
+ }
+
+ leaf speed {
+ type yang:gauge64;
+ units "bits/second";
+ description
+ "An estimate of the interface's current bandwidth in bits
+ per second. For interfaces that do not vary in
+ bandwidth or for those where no accurate estimation can
+ be made, this node should contain the nominal bandwidth.
+ For interfaces that have no concept of bandwidth, this
+ node is not present.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifSpeed, ifHighSpeed";
+ }
+
+
+ container statistics {
+ description
+ "A collection of interface-related statistics objects.";
+
+ leaf discontinuity-time {
+ type yang:date-and-time;
+ mandatory true;
+ description
+ "The time on the most recent occasion at which any one or
+ more of this interface's counters suffered a
+ discontinuity. If no such discontinuities have occurred
+ since the last re-initialization of the local management
+ subsystem, then this node contains the time the local
+ management subsystem re-initialized itself.";
+ }
+
+ leaf in-octets {
+ type yang:counter64;
+ description
+ "The total number of octets received on the interface,
+ including framing characters.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCInOctets";
+ }
+
+ leaf in-unicast-pkts {
+ type yang:counter64;
+ description
+ "The number of packets, delivered by this sub-layer to a
+ higher (sub-)layer, that were not addressed to a
+ multicast or broadcast address at this sub-layer.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts";
+ }
+
+ leaf in-broadcast-pkts {
+ type yang:counter64;
+ description
+ "The number of packets, delivered by this sub-layer to a
+ higher (sub-)layer, that were addressed to a broadcast
+ address at this sub-layer.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCInBroadcastPkts";
+ }
+
+ leaf in-multicast-pkts {
+ type yang:counter64;
+ description
+ "The number of packets, delivered by this sub-layer to a
+ higher (sub-)layer, that were addressed to a multicast
+ address at this sub-layer. For a MAC-layer protocol,
+ this includes both Group and Functional addresses.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCInMulticastPkts";
+ }
+
+ leaf in-discards {
+ type yang:counter32;
+ description
+ "The number of inbound packets that were chosen to be
+ discarded even though no errors had been detected to
+ prevent their being deliverable to a higher-layer
+ protocol. One possible reason for discarding such a
+ packet could be to free up buffer space.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifInDiscards";
+ }
+
+ leaf in-errors {
+ type yang:counter32;
+ description
+ "For packet-oriented interfaces, the number of inbound
+ packets that contained errors preventing them from being
+ deliverable to a higher-layer protocol. For character-
+ oriented or fixed-length interfaces, the number of
+ inbound transmission units that contained errors
+ preventing them from being deliverable to a higher-layer
+ protocol.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifInErrors";
+ }
+
+ leaf in-unknown-protos {
+ type yang:counter32;
+ description
+ "For packet-oriented interfaces, the number of packets
+ received via the interface that were discarded because
+ of an unknown or unsupported protocol. For
+ character-oriented or fixed-length interfaces that
+ support protocol multiplexing, the number of
+ transmission units received via the interface that were
+ discarded because of an unknown or unsupported protocol.
+ For any interface that does not support protocol
+ multiplexing, this counter is not present.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";
+ }
+
+ leaf out-octets {
+ type yang:counter64;
+ description
+ "The total number of octets transmitted out of the
+ interface, including framing characters.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCOutOctets";
+ }
+
+ leaf out-unicast-pkts {
+ type yang:counter64;
+ description
+ "The total number of packets that higher-level protocols
+ requested be transmitted, and that were not addressed
+ to a multicast or broadcast address at this sub-layer,
+ including those that were discarded or not sent.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts";
+ }
+
+ leaf out-broadcast-pkts {
+ type yang:counter64;
+ description
+ "The total number of packets that higher-level protocols
+ requested be transmitted, and that were addressed to a
+ broadcast address at this sub-layer, including those
+ that were discarded or not sent.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCOutBroadcastPkts";
+ }
+
+ leaf out-multicast-pkts {
+ type yang:counter64;
+ description
+ "The total number of packets that higher-level protocols
+ requested be transmitted, and that were addressed to a
+ multicast address at this sub-layer, including those
+ that were discarded or not sent. For a MAC-layer
+ protocol, this includes both Group and Functional
+ addresses.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCOutMulticastPkts";
+ }
+
+ leaf out-discards {
+ type yang:counter32;
+ description
+ "The number of outbound packets that were chosen to be
+ discarded even though no errors had been detected to
+ prevent their being transmitted. One possible reason
+ for discarding such a packet could be to free up buffer
+ space.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifOutDiscards";
+ }
+
+ leaf out-errors {
+ type yang:counter32;
+ description
+ "For packet-oriented interfaces, the number of outbound
+ packets that could not be transmitted because of errors.
+ For character-oriented or fixed-length interfaces, the
+ number of outbound transmission units that could not be
+ transmitted because of errors.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifOutErrors";
+ }
+ }
+ }
+ }
+ }
diff --git a/models/openconfig/src/main/yang/comm/ietf-yang-types.yang b/models/openconfig/src/main/yang/comm/ietf-yang-types.yang
new file mode 100644
index 0000000..9a543fa
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/ietf-yang-types.yang
@@ -0,0 +1,490 @@
+ module ietf-yang-types {
+
+ yang-version 1;
+
+ namespace
+ "urn:ietf:params:xml:ns:yang:ietf-yang-types";
+
+ prefix yang;
+
+ organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+
+ WG Chair: David Kessens
+ <mailto:david.kessens@nsn.com>
+
+ WG Chair: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+
+ Editor: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>";
+
+ description
+ "This module contains a collection of generally useful derived
+ YANG data types.
+
+ Copyright (c) 2013 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 6991; see
+ the RFC itself for full legal notices.";
+
+ revision "2013-07-15" {
+ description
+ "This revision adds the following new data types:
+ - yang-identifier
+ - hex-string
+ - uuid
+ - dotted-quad";
+ reference
+ "RFC 6991: Common YANG Data Types";
+
+ }
+
+ revision "2010-09-24" {
+ description "Initial revision.";
+ reference
+ "RFC 6021: Common YANG Data Types";
+
+ }
+
+
+ typedef counter32 {
+ type uint32;
+ description
+ "The counter32 type represents a non-negative integer
+ that monotonically increases until it reaches a
+ maximum value of 2^32-1 (4294967295 decimal), when it
+ wraps around and starts increasing again from zero.
+
+ Counters have no defined 'initial' value, and thus, a
+ single value of a counter has (in general) no information
+ content. Discontinuities in the monotonically increasing
+ value normally occur at re-initialization of the
+ management system, and at other times as specified in the
+ description of a schema node using this type. If such
+ other times can occur, for example, the creation of
+ a schema node of type counter32 at times other than
+ re-initialization, then a corresponding schema node
+ should be defined, with an appropriate type, to indicate
+ the last discontinuity.
+
+ The counter32 type should not be used for configuration
+ schema nodes. A default statement SHOULD NOT be used in
+ combination with the type counter32.
+
+ In the value set and its semantics, this type is equivalent
+ to the Counter32 type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2
+ (SMIv2)";
+
+ }
+
+ typedef zero-based-counter32 {
+ type counter32;
+ default "0";
+ description
+ "The zero-based-counter32 type represents a counter32
+ that has the defined 'initial' value zero.
+
+ A schema node of this type will be set to zero (0) on creation
+ and will thereafter increase monotonically until it reaches
+ a maximum value of 2^32-1 (4294967295 decimal), when it
+ wraps around and starts increasing again from zero.
+
+ Provided that an application discovers a new schema node
+ of this type within the minimum time to wrap, it can use the
+ 'initial' value as a delta. It is important for a management
+ station to be aware of this minimum time and the actual time
+ between polls, and to discard data if the actual time is too
+ long or there is no defined minimum time.
+
+ In the value set and its semantics, this type is equivalent
+ to the ZeroBasedCounter32 textual convention of the SMIv2.";
+ reference
+ "RFC 4502: Remote Network Monitoring Management Information
+ Base Version 2";
+
+ }
+
+ typedef counter64 {
+ type uint64;
+ description
+ "The counter64 type represents a non-negative integer
+ that monotonically increases until it reaches a
+ maximum value of 2^64-1 (18446744073709551615 decimal),
+ when it wraps around and starts increasing again from zero.
+
+ Counters have no defined 'initial' value, and thus, a
+ single value of a counter has (in general) no information
+ content. Discontinuities in the monotonically increasing
+ value normally occur at re-initialization of the
+ management system, and at other times as specified in the
+ description of a schema node using this type. If such
+ other times can occur, for example, the creation of
+ a schema node of type counter64 at times other than
+ re-initialization, then a corresponding schema node
+ should be defined, with an appropriate type, to indicate
+ the last discontinuity.
+
+ The counter64 type should not be used for configuration
+ schema nodes. A default statement SHOULD NOT be used in
+ combination with the type counter64.
+
+ In the value set and its semantics, this type is equivalent
+ to the Counter64 type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2
+ (SMIv2)";
+
+ }
+
+ typedef zero-based-counter64 {
+ type counter64;
+ default "0";
+ description
+ "The zero-based-counter64 type represents a counter64 that
+ has the defined 'initial' value zero.
+
+
+
+
+ A schema node of this type will be set to zero (0) on creation
+ and will thereafter increase monotonically until it reaches
+ a maximum value of 2^64-1 (18446744073709551615 decimal),
+ when it wraps around and starts increasing again from zero.
+
+ Provided that an application discovers a new schema node
+ of this type within the minimum time to wrap, it can use the
+ 'initial' value as a delta. It is important for a management
+ station to be aware of this minimum time and the actual time
+ between polls, and to discard data if the actual time is too
+ long or there is no defined minimum time.
+
+ In the value set and its semantics, this type is equivalent
+ to the ZeroBasedCounter64 textual convention of the SMIv2.";
+ reference
+ "RFC 2856: Textual Conventions for Additional High Capacity
+ Data Types";
+
+ }
+
+ typedef gauge32 {
+ type uint32;
+ description
+ "The gauge32 type represents a non-negative integer, which
+ may increase or decrease, but shall never exceed a maximum
+ value, nor fall below a minimum value. The maximum value
+ cannot be greater than 2^32-1 (4294967295 decimal), and
+ the minimum value cannot be smaller than 0. The value of
+ a gauge32 has its maximum value whenever the information
+ being modeled is greater than or equal to its maximum
+ value, and has its minimum value whenever the information
+ being modeled is smaller than or equal to its minimum value.
+ If the information being modeled subsequently decreases
+ below (increases above) the maximum (minimum) value, the
+ gauge32 also decreases (increases).
+
+ In the value set and its semantics, this type is equivalent
+ to the Gauge32 type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2
+ (SMIv2)";
+
+ }
+
+ typedef gauge64 {
+ type uint64;
+ description
+ "The gauge64 type represents a non-negative integer, which
+ may increase or decrease, but shall never exceed a maximum
+ value, nor fall below a minimum value. The maximum value
+ cannot be greater than 2^64-1 (18446744073709551615), and
+ the minimum value cannot be smaller than 0. The value of
+ a gauge64 has its maximum value whenever the information
+ being modeled is greater than or equal to its maximum
+ value, and has its minimum value whenever the information
+ being modeled is smaller than or equal to its minimum value.
+ If the information being modeled subsequently decreases
+ below (increases above) the maximum (minimum) value, the
+ gauge64 also decreases (increases).
+
+ In the value set and its semantics, this type is equivalent
+ to the CounterBasedGauge64 SMIv2 textual convention defined
+ in RFC 2856";
+ reference
+ "RFC 2856: Textual Conventions for Additional High Capacity
+ Data Types";
+
+ }
+
+ typedef object-identifier {
+ type string {
+ pattern
+ '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*';
+ }
+ description
+ "The object-identifier type represents administratively
+ assigned names in a registration-hierarchical-name tree.
+
+ Values of this type are denoted as a sequence of numerical
+ non-negative sub-identifier values. Each sub-identifier
+ value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers
+ are separated by single dots and without any intermediate
+ whitespace.
+
+ The ASN.1 standard restricts the value space of the first
+ sub-identifier to 0, 1, or 2. Furthermore, the value space
+ of the second sub-identifier is restricted to the range
+ 0 to 39 if the first sub-identifier is 0 or 1. Finally,
+ the ASN.1 standard requires that an object identifier
+ has always at least two sub-identifiers. The pattern
+ captures these restrictions.
+
+ Although the number of sub-identifiers is not limited,
+ module designers should realize that there may be
+ implementations that stick with the SMIv2 limit of 128
+ sub-identifiers.
+
+ This type is a superset of the SMIv2 OBJECT IDENTIFIER type
+ since it is not restricted to 128 sub-identifiers. Hence,
+ this type SHOULD NOT be used to represent the SMIv2 OBJECT
+ IDENTIFIER type; the object-identifier-128 type SHOULD be
+ used instead.";
+ reference
+ "ISO9834-1: Information technology -- Open Systems
+ Interconnection -- Procedures for the operation of OSI
+ Registration Authorities: General procedures and top
+ arcs of the ASN.1 Object Identifier tree";
+
+ }
+
+ typedef object-identifier-128 {
+ type object-identifier {
+ pattern '\d*(\.\d*){1,127}';
+ }
+ description
+ "This type represents object-identifiers restricted to 128
+ sub-identifiers.
+
+ In the value set and its semantics, this type is equivalent
+ to the OBJECT IDENTIFIER type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2
+ (SMIv2)";
+
+ }
+
+ typedef yang-identifier {
+ type string {
+ length "1..max";
+ pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*';
+ pattern
+ '.|..|[^xX].*|.[^mM].*|..[^lL].*';
+ }
+ description
+ "A YANG identifier string as defined by the 'identifier'
+ rule in Section 12 of RFC 6020. An identifier must
+ start with an alphabetic character or an underscore
+ followed by an arbitrary sequence of alphabetic or
+ numeric characters, underscores, hyphens, or dots.
+
+ A YANG identifier MUST NOT start with any possible
+ combination of the lowercase or uppercase character
+ sequence 'xml'.";
+ reference
+ "RFC 6020: YANG - A Data Modeling Language for the Network
+ Configuration Protocol (NETCONF)";
+
+ }
+
+ typedef date-and-time {
+ type string {
+ pattern
+ '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?(Z|[\+\-]\d{2}:\d{2})';
+ }
+ description
+ "The date-and-time type is a profile of the ISO 8601
+ standard for representation of dates and times using the
+ Gregorian calendar. The profile is defined by the
+ date-time production in Section 5.6 of RFC 3339.
+
+ The date-and-time type is compatible with the dateTime XML
+ schema type with the following notable exceptions:
+
+ (a) The date-and-time type does not allow negative years.
+
+ (b) The date-and-time time-offset -00:00 indicates an unknown
+ time zone (see RFC 3339) while -00:00 and +00:00 and Z
+ all represent the same time zone in dateTime.
+
+ (c) The canonical format (see below) of data-and-time values
+ differs from the canonical format used by the dateTime XML
+ schema type, which requires all times to be in UTC using
+ the time-offset 'Z'.
+
+ This type is not equivalent to the DateAndTime textual
+ convention of the SMIv2 since RFC 3339 uses a different
+ separator between full-date and full-time and provides
+ higher resolution of time-secfrac.
+
+ The canonical format for date-and-time values with a known time
+ zone uses a numeric time zone offset that is calculated using
+ the device's configured known offset to UTC time. A change of
+ the device's offset to UTC time will cause date-and-time values
+ to change accordingly. Such changes might happen periodically
+ in case a server follows automatically daylight saving time
+ (DST) time zone offset changes. The canonical format for
+ date-and-time values with an unknown time zone (usually
+ referring to the notion of local time) uses the time-offset
+ -00:00.";
+ reference
+ "RFC 3339: Date and Time on the Internet: Timestamps
+ RFC 2579: Textual Conventions for SMIv2
+ XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
+
+ }
+
+ typedef timeticks {
+ type uint32;
+ description
+ "The timeticks type represents a non-negative integer that
+ represents the time, modulo 2^32 (4294967296 decimal), in
+ hundredths of a second between two epochs. When a schema
+ node is defined that uses this type, the description of
+ the schema node identifies both of the reference epochs.
+
+ In the value set and its semantics, this type is equivalent
+ to the TimeTicks type of the SMIv2.";
+ reference
+ "RFC 2578: Structure of Management Information Version 2
+ (SMIv2)";
+
+ }
+
+ typedef timestamp {
+ type timeticks;
+ description
+ "The timestamp type represents the value of an associated
+ timeticks schema node at which a specific occurrence
+ happened. The specific occurrence must be defined in the
+ description of any schema node defined using this type. When
+ the specific occurrence occurred prior to the last time the
+ associated timeticks attribute was zero, then the timestamp
+ value is zero. Note that this requires all timestamp values
+ to be reset to zero when the value of the associated timeticks
+ attribute reaches 497+ days and wraps around to zero.
+
+ The associated timeticks schema node must be specified
+ in the description of any schema node using this type.
+
+ In the value set and its semantics, this type is equivalent
+ to the TimeStamp textual convention of the SMIv2.";
+ reference
+ "RFC 2579: Textual Conventions for SMIv2";
+
+ }
+
+ typedef phys-address {
+ type string {
+ pattern
+ '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
+ }
+ description
+ "Represents media- or physical-level addresses represented
+ as a sequence octets, each octet represented by two hexadecimal
+ numbers. Octets are separated by colons. The canonical
+ representation uses lowercase characters.
+
+ In the value set and its semantics, this type is equivalent
+ to the PhysAddress textual convention of the SMIv2.";
+ reference
+ "RFC 2579: Textual Conventions for SMIv2";
+
+ }
+
+ typedef mac-address {
+ type string {
+ pattern
+ '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
+ }
+ description
+ "The mac-address type represents an IEEE 802 MAC address.
+ The canonical representation uses lowercase characters.
+
+ In the value set and its semantics, this type is equivalent
+ to the MacAddress textual convention of the SMIv2.";
+ reference
+ "IEEE 802: IEEE Standard for Local and Metropolitan Area
+ Networks: Overview and Architecture
+ RFC 2579: Textual Conventions for SMIv2";
+
+ }
+
+ typedef xpath1.0 {
+ type string;
+ description
+ "This type represents an XPATH 1.0 expression.
+
+ When a schema node is defined that uses this type, the
+ description of the schema node MUST specify the XPath
+ context in which the XPath expression is evaluated.";
+ reference
+ "XPATH: XML Path Language (XPath) Version 1.0";
+
+ }
+
+ typedef hex-string {
+ type string {
+ pattern
+ '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
+ }
+ description
+ "A hexadecimal string with octets represented as hex digits
+ separated by colons. The canonical representation uses
+ lowercase characters.";
+ }
+
+ typedef uuid {
+ type string {
+ pattern
+ '[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}';
+ }
+ description
+ "A Universally Unique IDentifier in the string representation
+ defined in RFC 4122. The canonical representation uses
+ lowercase characters.
+
+ The following is an example of a UUID in string representation:
+ f81d4fae-7dec-11d0-a765-00a0c91e6bf6
+ ";
+ reference
+ "RFC 4122: A Universally Unique IDentifier (UUID) URN
+ Namespace";
+
+ }
+
+ typedef dotted-quad {
+ type string {
+ pattern
+ '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])';
+ }
+ description
+ "An unsigned 32-bit number expressed in the dotted-quad
+ notation, i.e., four octets written as decimal numbers
+ and separated with the '.' (full stop) character.";
+ }
+ } // module ietf-yang-types
+