diff --git a/models/openconfig/src/main/yang/comm/iana-if-type.yang b/models/openconfig/src/main/yang/comm/iana-if-type.yang
new file mode 100644
index 0000000..931f8b6
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/iana-if-type.yang
@@ -0,0 +1,1629 @@
+module iana-if-type {
+  namespace "urn:ietf:params:xml:ns:yang:iana-if-type";
+  prefix ianaift;
+
+  import ietf-interfaces {
+    prefix if;
+  }
+
+  organization "IANA";
+  contact
+    "        Internet Assigned Numbers Authority
+
+     Postal: ICANN
+             12025 Waterfront Drive, Suite 300
+             Los Angeles, CA 90094-2536
+             United States
+
+     Tel:    +1 310 301 5800
+     <mailto:iana&iana.org>";
+  description
+    "This YANG module defines YANG identities for IANA-registered
+     interface types.
+
+     This YANG module is maintained by IANA and reflects the
+     'ifType definitions' registry.
+
+     The latest revision of this YANG module can be obtained from
+     the IANA web site.
+
+     Requests for new values should be made to IANA via
+     email (iana&iana.org).
+
+     Copyright (c) 2014 IETF Trust and the persons identified as
+     authors of the code.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD License
+     set forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (http://trustee.ietf.org/license-info).
+
+     The initial version of this YANG module is part of RFC 7224;
+     see the RFC itself for full legal notices.";
+  reference
+    "IANA 'ifType definitions' registry.
+     <http://www.iana.org/assignments/smi-numbers>";
+
+  revision 2017-03-30 {
+    description
+      "Registered ifType 290.";
+  }
+
+  revision 2017-01-19 {
+    description
+      "Registered ifType 289.";
+  }
+
+  revision 2016-11-23 {
+    description
+      "Registered ifTypes 283-288.";
+  }
+
+  revision 2016-06-09 {
+    description
+      "Registered ifType 282.";
+  }
+  revision 2016-05-03 {
+    description
+      "Registered ifType 281.";
+  }
+  revision 2015-06-12 {
+    description
+      "Corrected formatting issue.";
+  }  
+  revision 2014-09-24 {
+    description
+      "Registered ifType 280.";
+  }
+  revision 2014-09-19 {
+    description
+      "Registered ifType 279.";
+  }
+  revision 2014-07-03 {
+    description
+      "Registered ifTypes 277-278.";
+  }
+  revision 2014-05-19 {
+    description
+      "Updated the contact address.";
+  }
+  revision 2014-05-08 {
+    description
+      "Initial revision.";
+    reference
+      "RFC 7224: IANA Interface Type YANG Module";
+  }
+
+  identity iana-interface-type {
+    base if:interface-type;
+    description
+      "This identity is used as a base for all interface types
+       defined in the 'ifType definitions' registry.";
+  }
+
+  identity other {
+    base iana-interface-type;
+  }
+  identity regular1822 {
+    base iana-interface-type;
+  }
+  identity hdh1822 {
+    base iana-interface-type;
+  }
+  identity ddnX25 {
+    base iana-interface-type;
+  }
+  identity rfc877x25 {
+    base iana-interface-type;
+    reference
+      "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer";
+  }
+  identity ethernetCsmacd {
+    base iana-interface-type;
+    description
+      "For all Ethernet-like interfaces, regardless of speed,
+       as per RFC 3635.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity iso88023Csmacd {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Deprecated via RFC 3635.
+       Use ethernetCsmacd(6) instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity iso88024TokenBus {
+    base iana-interface-type;
+  }
+  identity iso88025TokenRing {
+    base iana-interface-type;
+  }
+  identity iso88026Man {
+    base iana-interface-type;
+  }
+  identity starLan {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Deprecated via RFC 3635.
+       Use ethernetCsmacd(6) instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity proteon10Mbit {
+    base iana-interface-type;
+  }
+  identity proteon80Mbit {
+    base iana-interface-type;
+  }
+  identity hyperchannel {
+    base iana-interface-type;
+  }
+  identity fddi {
+    base iana-interface-type;
+    reference
+      "RFC 1512 - FDDI Management Information Base";
+  }
+  identity lapb {
+    base iana-interface-type;
+    reference
+      "RFC 1381 - SNMP MIB Extension for X.25 LAPB";
+  }
+  identity sdlc {
+    base iana-interface-type;
+  }
+  identity ds1 {
+    base iana-interface-type;
+    description
+      "DS1-MIB.";
+    reference
+      "RFC 4805 - Definitions of Managed Objects for the
+                  DS1, J1, E1, DS2, and E2 Interface Types";
+  }
+  identity e1 {
+    base iana-interface-type;
+    status obsolete;
+    description
+      "Obsolete; see DS1-MIB.";
+    reference
+      "RFC 4805 - Definitions of Managed Objects for the
+                  DS1, J1, E1, DS2, and E2 Interface Types";
+  }
+  identity basicISDN {
+    base iana-interface-type;
+    description
+      "No longer used.  See also RFC 2127.";
+  }
+  identity primaryISDN {
+    base iana-interface-type;
+    description
+      "No longer used.  See also RFC 2127.";
+  }
+  identity propPointToPointSerial {
+    base iana-interface-type;
+    description
+      "Proprietary serial.";
+  }
+  identity ppp {
+    base iana-interface-type;
+  }
+  identity softwareLoopback {
+    base iana-interface-type;
+  }
+  identity eon {
+    base iana-interface-type;
+    description
+      "CLNP over IP.";
+  }
+  identity ethernet3Mbit {
+    base iana-interface-type;
+  }
+  identity nsip {
+    base iana-interface-type;
+    description
+      "XNS over IP.";
+  }
+  identity slip {
+    base iana-interface-type;
+    description
+      "Generic SLIP.";
+  }
+  identity ultra {
+    base iana-interface-type;
+    description
+      "Ultra Technologies.";
+  }
+  identity ds3 {
+    base iana-interface-type;
+    description
+      "DS3-MIB.";
+    reference
+      "RFC 3896 - Definitions of Managed Objects for the
+                  DS3/E3 Interface Type";
+  }
+  identity sip {
+    base iana-interface-type;
+    description
+      "SMDS, coffee.";
+    reference
+      "RFC 1694 - Definitions of Managed Objects for SMDS
+                  Interfaces using SMIv2";
+  }
+  identity frameRelay {
+    base iana-interface-type;
+    description
+      "DTE only.";
+    reference
+      "RFC 2115 - Management Information Base for Frame Relay
+                  DTEs Using SMIv2";
+  }
+  identity rs232 {
+    base iana-interface-type;
+    reference
+      "RFC 1659 - Definitions of Managed Objects for RS-232-like
+                  Hardware Devices using SMIv2";
+  }
+  identity para {
+    base iana-interface-type;
+    description
+      "Parallel-port.";
+    reference
+      "RFC 1660 - Definitions of Managed Objects for
+                  Parallel-printer-like Hardware Devices using
+                  SMIv2";
+  }
+  identity arcnet {
+    base iana-interface-type;
+    description
+      "ARCnet.";
+  }
+  identity arcnetPlus {
+    base iana-interface-type;
+    description
+      "ARCnet Plus.";
+  }
+  identity atm {
+    base iana-interface-type;
+    description
+      "ATM cells.";
+  }
+  identity miox25 {
+    base iana-interface-type;
+    reference
+      "RFC 1461 - SNMP MIB extension for Multiprotocol
+                  Interconnect over X.25";
+  }
+  identity sonet {
+    base iana-interface-type;
+    description
+      "SONET or SDH.";
+  }
+  identity x25ple {
+    base iana-interface-type;
+    reference
+      "RFC 2127 - ISDN Management Information Base using SMIv2";
+  }
+  identity iso88022llc {
+    base iana-interface-type;
+  }
+  identity localTalk {
+    base iana-interface-type;
+  }
+  identity smdsDxi {
+    base iana-interface-type;
+  }
+  identity frameRelayService {
+    base iana-interface-type;
+    description
+      "FRNETSERV-MIB.";
+    reference
+      "RFC 2954 - Definitions of Managed Objects for Frame
+                  Relay Service";
+  }
+  identity v35 {
+    base iana-interface-type;
+  }
+  identity hssi {
+    base iana-interface-type;
+  }
+  identity hippi {
+    base iana-interface-type;
+  }
+  identity modem {
+    base iana-interface-type;
+    description
+      "Generic modem.";
+  }
+  identity aal5 {
+    base iana-interface-type;
+    description
+      "AAL5 over ATM.";
+  }
+  identity sonetPath {
+    base iana-interface-type;
+  }
+  identity sonetVT {
+    base iana-interface-type;
+  }
+  identity smdsIcip {
+    base iana-interface-type;
+    description
+      "SMDS InterCarrier Interface.";
+  }
+  identity propVirtual {
+    base iana-interface-type;
+    description
+      "Proprietary virtual/internal.";
+    reference
+      "RFC 2863 - The Interfaces Group MIB";
+  }
+  identity propMultiplexor {
+    base iana-interface-type;
+    description
+      "Proprietary multiplexing.";
+    reference
+      "RFC 2863 - The Interfaces Group MIB";
+  }
+  identity ieee80212 {
+    base iana-interface-type;
+    description
+      "100BaseVG.";
+  }
+  identity fibreChannel {
+    base iana-interface-type;
+    description
+      "Fibre Channel.";
+  }
+  identity hippiInterface {
+    base iana-interface-type;
+    description
+      "HIPPI interfaces.";
+  }
+  identity frameRelayInterconnect {
+    base iana-interface-type;
+    status obsolete;
+    description
+      "Obsolete; use either
+       frameRelay(32) or frameRelayService(44).";
+  }
+  identity aflane8023 {
+    base iana-interface-type;
+    description
+      "ATM Emulated LAN for 802.3.";
+  }
+  identity aflane8025 {
+    base iana-interface-type;
+    description
+      "ATM Emulated LAN for 802.5.";
+  }
+  identity cctEmul {
+    base iana-interface-type;
+    description
+      "ATM Emulated circuit.";
+  }
+  identity fastEther {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Obsoleted via RFC 3635.
+       ethernetCsmacd(6) should be used instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity isdn {
+    base iana-interface-type;
+    description
+      "ISDN and X.25.";
+    reference
+      "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN
+                  in the Packet Mode";
+  }
+  identity v11 {
+    base iana-interface-type;
+    description
+      "CCITT V.11/X.21.";
+  }
+  identity v36 {
+    base iana-interface-type;
+    description
+      "CCITT V.36.";
+  }
+  identity g703at64k {
+    base iana-interface-type;
+    description
+      "CCITT G703 at 64Kbps.";
+  }
+  identity g703at2mb {
+    base iana-interface-type;
+    status obsolete;
+    description
+      "Obsolete; see DS1-MIB.";
+  }
+  identity qllc {
+    base iana-interface-type;
+    description
+      "SNA QLLC.";
+  }
+  identity fastEtherFX {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Obsoleted via RFC 3635.
+       ethernetCsmacd(6) should be used instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity channel {
+    base iana-interface-type;
+    description
+      "Channel.";
+  }
+  identity ieee80211 {
+    base iana-interface-type;
+    description
+      "Radio spread spectrum.";
+  }
+  identity ibm370parChan {
+    base iana-interface-type;
+    description
+      "IBM System 360/370 OEMI Channel.";
+  }
+  identity escon {
+    base iana-interface-type;
+    description
+      "IBM Enterprise Systems Connection.";
+  }
+  identity dlsw {
+    base iana-interface-type;
+    description
+      "Data Link Switching.";
+  }
+  identity isdns {
+    base iana-interface-type;
+    description
+      "ISDN S/T interface.";
+  }
+  identity isdnu {
+    base iana-interface-type;
+    description
+      "ISDN U interface.";
+  }
+  identity lapd {
+    base iana-interface-type;
+    description
+      "Link Access Protocol D.";
+  }
+  identity ipSwitch {
+    base iana-interface-type;
+    description
+      "IP Switching Objects.";
+  }
+  identity rsrb {
+    base iana-interface-type;
+    description
+      "Remote Source Route Bridging.";
+  }
+  identity atmLogical {
+    base iana-interface-type;
+    description
+      "ATM Logical Port.";
+    reference
+      "RFC 3606 - Definitions of Supplemental Managed Objects
+                  for ATM Interface";
+  }
+  identity ds0 {
+    base iana-interface-type;
+    description
+      "Digital Signal Level 0.";
+    reference
+      "RFC 2494 - Definitions of Managed Objects for the DS0
+                  and DS0 Bundle Interface Type";
+  }
+  identity ds0Bundle {
+    base iana-interface-type;
+    description
+      "Group of ds0s on the same ds1.";
+    reference
+      "RFC 2494 - Definitions of Managed Objects for the DS0
+                  and DS0 Bundle Interface Type";
+  }
+  identity bsc {
+    base iana-interface-type;
+    description
+      "Bisynchronous Protocol.";
+  }
+  identity async {
+    base iana-interface-type;
+    description
+      "Asynchronous Protocol.";
+  }
+  identity cnr {
+    base iana-interface-type;
+    description
+      "Combat Net Radio.";
+  }
+  identity iso88025Dtr {
+    base iana-interface-type;
+    description
+      "ISO 802.5r DTR.";
+  }
+  identity eplrs {
+    base iana-interface-type;
+    description
+      "Ext Pos Loc Report Sys.";
+  }
+  identity arap {
+    base iana-interface-type;
+    description
+      "Appletalk Remote Access Protocol.";
+  }
+  identity propCnls {
+    base iana-interface-type;
+    description
+      "Proprietary Connectionless Protocol.";
+  }
+  identity hostPad {
+    base iana-interface-type;
+    description
+      "CCITT-ITU X.29 PAD Protocol.";
+  }
+  identity termPad {
+    base iana-interface-type;
+    description
+      "CCITT-ITU X.3 PAD Facility.";
+  }
+  identity frameRelayMPI {
+    base iana-interface-type;
+    description
+      "Multiproto Interconnect over FR.";
+  }
+  identity x213 {
+    base iana-interface-type;
+    description
+      "CCITT-ITU X213.";
+  }
+  identity adsl {
+    base iana-interface-type;
+    description
+      "Asymmetric Digital Subscriber Loop.";
+  }
+  identity radsl {
+    base iana-interface-type;
+    description
+      "Rate-Adapt. Digital Subscriber Loop.";
+  }
+  identity sdsl {
+    base iana-interface-type;
+    description
+      "Symmetric Digital Subscriber Loop.";
+  }
+  identity vdsl {
+    base iana-interface-type;
+    description
+      "Very H-Speed Digital Subscrib. Loop.";
+  }
+  identity iso88025CRFPInt {
+    base iana-interface-type;
+    description
+      "ISO 802.5 CRFP.";
+  }
+  identity myrinet {
+    base iana-interface-type;
+    description
+      "Myricom Myrinet.";
+  }
+  identity voiceEM {
+    base iana-interface-type;
+    description
+      "Voice recEive and transMit.";
+  }
+  identity voiceFXO {
+    base iana-interface-type;
+    description
+      "Voice Foreign Exchange Office.";
+  }
+  identity voiceFXS {
+    base iana-interface-type;
+    description
+      "Voice Foreign Exchange Station.";
+  }
+  identity voiceEncap {
+    base iana-interface-type;
+    description
+      "Voice encapsulation.";
+  }
+  identity voiceOverIp {
+    base iana-interface-type;
+    description
+      "Voice over IP encapsulation.";
+  }
+  identity atmDxi {
+    base iana-interface-type;
+    description
+      "ATM DXI.";
+  }
+  identity atmFuni {
+    base iana-interface-type;
+    description
+      "ATM FUNI.";
+  }
+  identity atmIma {
+    base iana-interface-type;
+    description
+      "ATM IMA.";
+  }
+  identity pppMultilinkBundle {
+    base iana-interface-type;
+    description
+      "PPP Multilink Bundle.";
+  }
+  identity ipOverCdlc {
+    base iana-interface-type;
+    description
+      "IBM ipOverCdlc.";
+  }
+  identity ipOverClaw {
+    base iana-interface-type;
+    description
+      "IBM Common Link Access to Workstn.";
+  }
+  identity stackToStack {
+    base iana-interface-type;
+    description
+      "IBM stackToStack.";
+  }
+  identity virtualIpAddress {
+    base iana-interface-type;
+    description
+      "IBM VIPA.";
+  }
+  identity mpc {
+    base iana-interface-type;
+    description
+      "IBM multi-protocol channel support.";
+  }
+  identity ipOverAtm {
+    base iana-interface-type;
+    description
+      "IBM ipOverAtm.";
+    reference
+      "RFC 2320 - Definitions of Managed Objects for Classical IP
+                  and ARP Over ATM Using SMIv2 (IPOA-MIB)";
+  }
+  identity iso88025Fiber {
+    base iana-interface-type;
+    description
+      "ISO 802.5j Fiber Token Ring.";
+  }
+  identity tdlc {
+    base iana-interface-type;
+    description
+      "IBM twinaxial data link control.";
+  }
+  identity gigabitEthernet {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Obsoleted via RFC 3635.
+       ethernetCsmacd(6) should be used instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity hdlc {
+    base iana-interface-type;
+    description
+      "HDLC.";
+  }
+  identity lapf {
+    base iana-interface-type;
+    description
+      "LAP F.";
+  }
+  identity v37 {
+    base iana-interface-type;
+    description
+      "V.37.";
+  }
+  identity x25mlp {
+    base iana-interface-type;
+    description
+      "Multi-Link Protocol.";
+  }
+  identity x25huntGroup {
+    base iana-interface-type;
+    description
+      "X25 Hunt Group.";
+  }
+  identity transpHdlc {
+    base iana-interface-type;
+    description
+      "Transp HDLC.";
+  }
+  identity interleave {
+    base iana-interface-type;
+    description
+      "Interleave channel.";
+  }
+  identity fast {
+    base iana-interface-type;
+    description
+      "Fast channel.";
+  }
+  identity ip {
+    base iana-interface-type;
+    description
+      "IP (for APPN HPR in IP networks).";
+  }
+  identity docsCableMaclayer {
+    base iana-interface-type;
+    description
+      "CATV Mac Layer.";
+  }
+  identity docsCableDownstream {
+    base iana-interface-type;
+    description
+      "CATV Downstream interface.";
+  }
+  identity docsCableUpstream {
+    base iana-interface-type;
+    description
+      "CATV Upstream interface.";
+  }
+  identity a12MppSwitch {
+    base iana-interface-type;
+    description
+      "Avalon Parallel Processor.";
+  }
+  identity tunnel {
+    base iana-interface-type;
+    description
+      "Encapsulation interface.";
+  }
+  identity coffee {
+    base iana-interface-type;
+    description
+      "Coffee pot.";
+    reference
+      "RFC 2325 - Coffee MIB";
+  }
+  identity ces {
+    base iana-interface-type;
+    description
+      "Circuit Emulation Service.";
+  }
+  identity atmSubInterface {
+    base iana-interface-type;
+    description
+      "ATM Sub Interface.";
+  }
+  identity l2vlan {
+    base iana-interface-type;
+    description
+      "Layer 2 Virtual LAN using 802.1Q.";
+  }
+  identity l3ipvlan {
+    base iana-interface-type;
+    description
+      "Layer 3 Virtual LAN using IP.";
+  }
+  identity l3ipxvlan {
+    base iana-interface-type;
+    description
+      "Layer 3 Virtual LAN using IPX.";
+  }
+  identity digitalPowerline {
+    base iana-interface-type;
+    description
+      "IP over Power Lines.";
+  }
+  identity mediaMailOverIp {
+    base iana-interface-type;
+    description
+      "Multimedia Mail over IP.";
+  }
+  identity dtm {
+    base iana-interface-type;
+    description
+      "Dynamic synchronous Transfer Mode.";
+  }
+  identity dcn {
+    base iana-interface-type;
+    description
+      "Data Communications Network.";
+  }
+  identity ipForward {
+    base iana-interface-type;
+    description
+      "IP Forwarding Interface.";
+  }
+  identity msdsl {
+    base iana-interface-type;
+    description
+      "Multi-rate Symmetric DSL.";
+  }
+  identity ieee1394 {
+    base iana-interface-type;
+
+    description
+      "IEEE1394 High Performance Serial Bus.";
+  }
+  identity if-gsn {
+    base iana-interface-type;
+    description
+      "HIPPI-6400.";
+  }
+  identity dvbRccMacLayer {
+    base iana-interface-type;
+    description
+      "DVB-RCC MAC Layer.";
+  }
+  identity dvbRccDownstream {
+    base iana-interface-type;
+    description
+      "DVB-RCC Downstream Channel.";
+  }
+  identity dvbRccUpstream {
+    base iana-interface-type;
+    description
+      "DVB-RCC Upstream Channel.";
+  }
+  identity atmVirtual {
+    base iana-interface-type;
+    description
+      "ATM Virtual Interface.";
+  }
+  identity mplsTunnel {
+    base iana-interface-type;
+    description
+      "MPLS Tunnel Virtual Interface.";
+  }
+  identity srp {
+    base iana-interface-type;
+    description
+      "Spatial Reuse Protocol.";
+  }
+  identity voiceOverAtm {
+    base iana-interface-type;
+    description
+      "Voice over ATM.";
+  }
+  identity voiceOverFrameRelay {
+    base iana-interface-type;
+    description
+      "Voice Over Frame Relay.";
+  }
+  identity idsl {
+    base iana-interface-type;
+    description
+      "Digital Subscriber Loop over ISDN.";
+  }
+  identity compositeLink {
+    base iana-interface-type;
+    description
+      "Avici Composite Link Interface.";
+  }
+  identity ss7SigLink {
+    base iana-interface-type;
+    description
+      "SS7 Signaling Link.";
+  }
+  identity propWirelessP2P {
+    base iana-interface-type;
+    description
+      "Prop. P2P wireless interface.";
+  }
+  identity frForward {
+    base iana-interface-type;
+    description
+      "Frame Forward Interface.";
+  }
+  identity rfc1483 {
+    base iana-interface-type;
+    description
+      "Multiprotocol over ATM AAL5.";
+    reference
+      "RFC 1483 - Multiprotocol Encapsulation over ATM
+                  Adaptation Layer 5";
+  }
+  identity usb {
+    base iana-interface-type;
+    description
+      "USB Interface.";
+  }
+  identity ieee8023adLag {
+    base iana-interface-type;
+    description
+      "IEEE 802.3ad Link Aggregate.";
+  }
+  identity bgppolicyaccounting {
+    base iana-interface-type;
+    description
+      "BGP Policy Accounting.";
+  }
+  identity frf16MfrBundle {
+    base iana-interface-type;
+    description
+      "FRF.16 Multilink Frame Relay.";
+  }
+  identity h323Gatekeeper {
+    base iana-interface-type;
+    description
+      "H323 Gatekeeper.";
+  }
+  identity h323Proxy {
+    base iana-interface-type;
+    description
+      "H323 Voice and Video Proxy.";
+  }
+  identity mpls {
+    base iana-interface-type;
+    description
+      "MPLS.";
+  }
+  identity mfSigLink {
+    base iana-interface-type;
+    description
+      "Multi-frequency signaling link.";
+  }
+  identity hdsl2 {
+    base iana-interface-type;
+    description
+      "High Bit-Rate DSL - 2nd generation.";
+  }
+  identity shdsl {
+    base iana-interface-type;
+    description
+      "Multirate HDSL2.";
+  }
+  identity ds1FDL {
+    base iana-interface-type;
+    description
+      "Facility Data Link (4Kbps) on a DS1.";
+  }
+  identity pos {
+    base iana-interface-type;
+    description
+      "Packet over SONET/SDH Interface.";
+  }
+  identity dvbAsiIn {
+    base iana-interface-type;
+    description
+      "DVB-ASI Input.";
+  }
+  identity dvbAsiOut {
+    base iana-interface-type;
+    description
+      "DVB-ASI Output.";
+  }
+  identity plc {
+    base iana-interface-type;
+    description
+      "Power Line Communications.";
+  }
+  identity nfas {
+    base iana-interface-type;
+    description
+      "Non-Facility Associated Signaling.";
+  }
+  identity tr008 {
+    base iana-interface-type;
+    description
+      "TR008.";
+  }
+  identity gr303RDT {
+    base iana-interface-type;
+    description
+      "Remote Digital Terminal.";
+  }
+  identity gr303IDT {
+    base iana-interface-type;
+    description
+      "Integrated Digital Terminal.";
+  }
+  identity isup {
+    base iana-interface-type;
+    description
+      "ISUP.";
+  }
+  identity propDocsWirelessMaclayer {
+    base iana-interface-type;
+    description
+      "Cisco proprietary Maclayer.";
+  }
+  identity propDocsWirelessDownstream {
+    base iana-interface-type;
+    description
+      "Cisco proprietary Downstream.";
+  }
+  identity propDocsWirelessUpstream {
+    base iana-interface-type;
+    description
+      "Cisco proprietary Upstream.";
+  }
+  identity hiperlan2 {
+    base iana-interface-type;
+    description
+      "HIPERLAN Type 2 Radio Interface.";
+  }
+  identity propBWAp2Mp {
+    base iana-interface-type;
+    description
+      "PropBroadbandWirelessAccesspt2Multipt (use of this value
+       for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f
+       is deprecated, and ieee80216WMAN(237) should be used
+       instead).";
+  }
+  identity sonetOverheadChannel {
+    base iana-interface-type;
+    description
+      "SONET Overhead Channel.";
+  }
+  identity digitalWrapperOverheadChannel {
+    base iana-interface-type;
+    description
+      "Digital Wrapper.";
+  }
+  identity aal2 {
+    base iana-interface-type;
+    description
+      "ATM adaptation layer 2.";
+  }
+  identity radioMAC {
+    base iana-interface-type;
+    description
+      "MAC layer over radio links.";
+  }
+  identity atmRadio {
+    base iana-interface-type;
+    description
+      "ATM over radio links.";
+  }
+  identity imt {
+    base iana-interface-type;
+    description
+      "Inter-Machine Trunks.";
+  }
+  identity mvl {
+    base iana-interface-type;
+    description
+      "Multiple Virtual Lines DSL.";
+  }
+  identity reachDSL {
+    base iana-interface-type;
+    description
+      "Long Reach DSL.";
+  }
+  identity frDlciEndPt {
+    base iana-interface-type;
+    description
+      "Frame Relay DLCI End Point.";
+  }
+  identity atmVciEndPt {
+    base iana-interface-type;
+    description
+      "ATM VCI End Point.";
+  }
+  identity opticalChannel {
+    base iana-interface-type;
+    description
+      "Optical Channel.";
+  }
+  identity opticalTransport {
+    base iana-interface-type;
+    description
+      "Optical Transport.";
+  }
+  identity propAtm {
+    base iana-interface-type;
+    description
+      "Proprietary ATM.";
+  }
+  identity voiceOverCable {
+    base iana-interface-type;
+    description
+      "Voice Over Cable Interface.";
+  }
+  identity infiniband {
+    base iana-interface-type;
+    description
+      "Infiniband.";
+  }
+  identity teLink {
+    base iana-interface-type;
+    description
+      "TE Link.";
+  }
+  identity q2931 {
+    base iana-interface-type;
+    description
+      "Q.2931.";
+  }
+  identity virtualTg {
+    base iana-interface-type;
+    description
+      "Virtual Trunk Group.";
+  }
+  identity sipTg {
+    base iana-interface-type;
+    description
+      "SIP Trunk Group.";
+  }
+  identity sipSig {
+    base iana-interface-type;
+    description
+      "SIP Signaling.";
+  }
+  identity docsCableUpstreamChannel {
+    base iana-interface-type;
+    description
+      "CATV Upstream Channel.";
+  }
+  identity econet {
+    base iana-interface-type;
+    description
+      "Acorn Econet.";
+  }
+  identity pon155 {
+    base iana-interface-type;
+    description
+      "FSAN 155Mb Symetrical PON interface.";
+  }
+  identity pon622 {
+    base iana-interface-type;
+    description
+      "FSAN 622Mb Symetrical PON interface.";
+  }
+  identity bridge {
+    base iana-interface-type;
+    description
+      "Transparent bridge interface.";
+  }
+  identity linegroup {
+    base iana-interface-type;
+    description
+      "Interface common to multiple lines.";
+  }
+  identity voiceEMFGD {
+    base iana-interface-type;
+    description
+      "Voice E&M Feature Group D.";
+  }
+  identity voiceFGDEANA {
+    base iana-interface-type;
+    description
+      "Voice FGD Exchange Access North American.";
+  }
+  identity voiceDID {
+    base iana-interface-type;
+    description
+      "Voice Direct Inward Dialing.";
+  }
+  identity mpegTransport {
+    base iana-interface-type;
+    description
+      "MPEG transport interface.";
+  }
+  identity sixToFour {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "6to4 interface (DEPRECATED).";
+    reference
+      "RFC 4087 - IP Tunnel MIB";
+  }
+  identity gtp {
+    base iana-interface-type;
+    description
+      "GTP (GPRS Tunneling Protocol).";
+  }
+  identity pdnEtherLoop1 {
+    base iana-interface-type;
+    description
+      "Paradyne EtherLoop 1.";
+  }
+  identity pdnEtherLoop2 {
+    base iana-interface-type;
+    description
+      "Paradyne EtherLoop 2.";
+  }
+  identity opticalChannelGroup {
+    base iana-interface-type;
+    description
+      "Optical Channel Group.";
+  }
+  identity homepna {
+    base iana-interface-type;
+    description
+      "HomePNA ITU-T G.989.";
+  }
+  identity gfp {
+    base iana-interface-type;
+    description
+      "Generic Framing Procedure (GFP).";
+  }
+  identity ciscoISLvlan {
+    base iana-interface-type;
+    description
+      "Layer 2 Virtual LAN using Cisco ISL.";
+  }
+  identity actelisMetaLOOP {
+    base iana-interface-type;
+    description
+      "Acteleis proprietary MetaLOOP High Speed Link.";
+  }
+  identity fcipLink {
+    base iana-interface-type;
+    description
+      "FCIP Link.";
+  }
+  identity rpr {
+    base iana-interface-type;
+    description
+      "Resilient Packet Ring Interface Type.";
+  }
+  identity qam {
+    base iana-interface-type;
+    description
+      "RF Qam Interface.";
+  }
+  identity lmp {
+    base iana-interface-type;
+    description
+      "Link Management Protocol.";
+    reference
+      "RFC 4327 - Link Management Protocol (LMP) Management
+                  Information Base (MIB)";
+  }
+  identity cblVectaStar {
+    base iana-interface-type;
+    description
+      "Cambridge Broadband Networks Limited VectaStar.";
+  }
+  identity docsCableMCmtsDownstream {
+    base iana-interface-type;
+    description
+      "CATV Modular CMTS Downstream Interface.";
+  }
+  identity adsl2 {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Asymmetric Digital Subscriber Loop Version 2
+       (DEPRECATED/OBSOLETED - please use adsl2plus(238)
+       instead).";
+    reference
+      "RFC 4706 - Definitions of Managed Objects for Asymmetric
+                  Digital Subscriber Line 2 (ADSL2)";
+  }
+  identity macSecControlledIF {
+    base iana-interface-type;
+    description
+      "MACSecControlled.";
+  }
+  identity macSecUncontrolledIF {
+    base iana-interface-type;
+    description
+      "MACSecUncontrolled.";
+  }
+  identity aviciOpticalEther {
+    base iana-interface-type;
+    description
+      "Avici Optical Ethernet Aggregate.";
+  }
+  identity atmbond {
+    base iana-interface-type;
+    description
+      "atmbond.";
+  }
+  identity voiceFGDOS {
+    base iana-interface-type;
+    description
+      "Voice FGD Operator Services.";
+  }
+  identity mocaVersion1 {
+    base iana-interface-type;
+    description
+      "MultiMedia over Coax Alliance (MoCA) Interface
+       as documented in information provided privately to IANA.";
+  }
+  identity ieee80216WMAN {
+    base iana-interface-type;
+    description
+      "IEEE 802.16 WMAN interface.";
+  }
+  identity adsl2plus {
+    base iana-interface-type;
+    description
+      "Asymmetric Digital Subscriber Loop Version 2 -
+       Version 2 Plus and all variants.";
+  }
+  identity dvbRcsMacLayer {
+    base iana-interface-type;
+    description
+      "DVB-RCS MAC Layer.";
+    reference
+      "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+  }
+  identity dvbTdm {
+    base iana-interface-type;
+    description
+      "DVB Satellite TDM.";
+    reference
+      "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+  }
+  identity dvbRcsTdma {
+    base iana-interface-type;
+    description
+      "DVB-RCS TDMA.";
+    reference
+      "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+  }
+  identity x86Laps {
+    base iana-interface-type;
+    description
+      "LAPS based on ITU-T X.86/Y.1323.";
+  }
+  identity wwanPP {
+    base iana-interface-type;
+    description
+      "3GPP WWAN.";
+  }
+  identity wwanPP2 {
+    base iana-interface-type;
+    description
+      "3GPP2 WWAN.";
+  }
+  identity voiceEBS {
+    base iana-interface-type;
+    description
+      "Voice P-phone EBS physical interface.";
+  }
+  identity ifPwType {
+    base iana-interface-type;
+    description
+      "Pseudowire interface type.";
+    reference
+      "RFC 5601 - Pseudowire (PW) Management Information Base (MIB)";
+  }
+  identity ilan {
+    base iana-interface-type;
+    description
+      "Internal LAN on a bridge per IEEE 802.1ap.";
+  }
+  identity pip {
+    base iana-interface-type;
+    description
+      "Provider Instance Port on a bridge per IEEE 802.1ah PBB.";
+  }
+  identity aluELP {
+    base iana-interface-type;
+    description
+      "Alcatel-Lucent Ethernet Link Protection.";
+  }
+  identity gpon {
+    base iana-interface-type;
+    description
+      "Gigabit-capable passive optical networks (G-PON) as per
+       ITU-T G.948.";
+  }
+  identity vdsl2 {
+    base iana-interface-type;
+    description
+      "Very high speed digital subscriber line Version 2
+       (as per ITU-T Recommendation G.993.2).";
+    reference
+      "RFC 5650 - Definitions of Managed Objects for Very High
+                  Speed Digital Subscriber Line 2 (VDSL2)";
+  }
+  identity capwapDot11Profile {
+    base iana-interface-type;
+    description
+      "WLAN Profile Interface.";
+    reference
+      "RFC 5834 - Control and Provisioning of Wireless Access
+                  Points (CAPWAP) Protocol Binding MIB for
+                  IEEE 802.11";
+  }
+  identity capwapDot11Bss {
+    base iana-interface-type;
+    description
+      "WLAN BSS Interface.";
+    reference
+      "RFC 5834 - Control and Provisioning of Wireless Access
+                  Points (CAPWAP) Protocol Binding MIB for
+                  IEEE 802.11";
+  }
+  identity capwapWtpVirtualRadio {
+    base iana-interface-type;
+    description
+      "WTP Virtual Radio Interface.";
+    reference
+      "RFC 5833 - Control and Provisioning of Wireless Access
+                  Points (CAPWAP) Protocol Base MIB";
+  }
+  identity bits {
+    base iana-interface-type;
+    description
+      "bitsport.";
+  }
+  identity docsCableUpstreamRfPort {
+    base iana-interface-type;
+    description
+      "DOCSIS CATV Upstream RF Port.";
+  }
+  identity cableDownstreamRfPort {
+    base iana-interface-type;
+    description
+      "CATV downstream RF Port.";
+  }
+  identity vmwareVirtualNic {
+    base iana-interface-type;
+    description
+      "VMware Virtual Network Interface.";
+  }
+  identity ieee802154 {
+    base iana-interface-type;
+    description
+      "IEEE 802.15.4 WPAN interface.";
+    reference
+      "IEEE 802.15.4-2006";
+  }
+  identity otnOdu {
+    base iana-interface-type;
+    description
+      "OTN Optical Data Unit.";
+  }
+  identity otnOtu {
+    base iana-interface-type;
+    description
+      "OTN Optical channel Transport Unit.";
+  }
+  identity ifVfiType {
+    base iana-interface-type;
+    description
+      "VPLS Forwarding Instance Interface Type.";
+  }
+  identity g9981 {
+    base iana-interface-type;
+    description
+      "G.998.1 bonded interface.";
+  }
+  identity g9982 {
+    base iana-interface-type;
+    description
+      "G.998.2 bonded interface.";
+  }
+  identity g9983 {
+    base iana-interface-type;
+    description
+      "G.998.3 bonded interface.";
+  }
+
+  identity aluEpon {
+    base iana-interface-type;
+    description
+      "Ethernet Passive Optical Networks (E-PON).";
+  }
+  identity aluEponOnu {
+    base iana-interface-type;
+    description
+      "EPON Optical Network Unit.";
+  }
+  identity aluEponPhysicalUni {
+    base iana-interface-type;
+    description
+      "EPON physical User to Network interface.";
+  }
+  identity aluEponLogicalLink {
+    base iana-interface-type;
+    description
+      "The emulation of a point-to-point link over the EPON
+       layer.";
+  }
+  identity aluGponOnu {
+    base iana-interface-type;
+    description
+      "GPON Optical Network Unit.";
+    reference
+      "ITU-T G.984.2";
+  }
+  identity aluGponPhysicalUni {
+    base iana-interface-type;
+    description
+      "GPON physical User to Network interface.";
+    reference
+      "ITU-T G.984.2";
+  }
+  identity vmwareNicTeam {
+    base iana-interface-type;
+    description
+      "VMware NIC Team.";
+  }
+  identity docsOfdmDownstream {
+    base iana-interface-type;
+    description
+      "CATV Downstream OFDM interface.";
+  }
+  identity docsOfdmaUpstream {
+    base iana-interface-type;
+    description
+      "CATV Upstream OFDMA interface.";
+  }
+  identity gfast {
+    base iana-interface-type;
+    description
+      "G.fast port.";
+    reference
+      "ITU-T G.9701";
+  }
+  identity sdci {
+    base iana-interface-type;
+    description
+      "SDCI (IO-Link).";
+    reference
+      "IEC 61131-9 Edition 1.0 2013-09";
+  }
+  identity xboxWireless {
+    base iana-interface-type;
+    description
+      "Xbox wireless.";
+  }
+  identity fastdsl {
+    base iana-interface-type;
+    description
+      "FastDSL.";
+    reference
+      "BBF TR-355";
+  }
+  identity docsCableScte55d1FwdOob {
+    base iana-interface-type;
+    description
+      "Cable SCTE 55-1 OOB Forward Channel.";
+  }
+  identity docsCableScte55d1RetOob {
+    base iana-interface-type;
+    description
+      "Cable SCTE 55-1 OOB Return Channel.";
+  }
+  identity docsCableScte55d2DsOob {
+    base iana-interface-type;
+    description
+      "Cable SCTE 55-2 OOB Downstream Channel.";
+  }
+  identity docsCableScte55d2UsOob {
+    base iana-interface-type;
+    description
+      "Cable SCTE 55-2 OOB Upstream Channel.";
+  }
+  identity docsCableNdf {
+    base iana-interface-type;
+    description
+      "Cable Narrowband Digital Forward.";
+  }
+  identity docsCableNdr {
+    base iana-interface-type;
+    description
+      "Cable Narrowband Digital Return.";
+  }
+  identity ptm {
+    base iana-interface-type;
+    description
+      "Packet Transfer Mode.";
+  }
+  identity ghn {
+    base iana-interface-type;
+    description
+      "G.hn port.";
+  }
+}
diff --git a/models/openconfig/src/main/yang/comm/ietf-inet-types.yang b/models/openconfig/src/main/yang/comm/ietf-inet-types.yang
new file mode 100644
index 0000000..2b7ed38
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/ietf-inet-types.yang
@@ -0,0 +1,454 @@
+  module ietf-inet-types {
+
+    yang-version 1;
+
+    namespace
+      "urn:ietf:params:xml:ns:yang:ietf-inet-types";
+
+    prefix inet;
+
+    organization
+      "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+    contact
+      "WG Web:   <http://tools.ietf.org/wg/netmod/>
+    WG List:  <mailto:netmod@ietf.org>
+
+    WG Chair: David Kessens
+              <mailto:david.kessens@nsn.com>
+
+    WG Chair: Juergen Schoenwaelder
+              <mailto:j.schoenwaelder@jacobs-university.de>
+
+    Editor:   Juergen Schoenwaelder
+              <mailto:j.schoenwaelder@jacobs-university.de>";
+
+    description
+      "This module contains a collection of generally useful derived
+    YANG data types for Internet addresses and related things.
+
+    Copyright (c) 2013 IETF Trust and the persons identified as
+    authors of the code.  All rights reserved.
+
+    Redistribution and use in source and binary forms, with or
+    without modification, is permitted pursuant to, and subject
+    to the license terms contained in, the Simplified BSD License
+    set forth in Section 4.c of the IETF Trust's Legal Provisions
+    Relating to IETF Documents
+    (http://trustee.ietf.org/license-info).
+
+    This version of this YANG module is part of RFC 6991; see
+    the RFC itself for full legal notices.";
+
+    revision "2013-07-15" {
+      description
+        "This revision adds the following new data types:
+      - ip-address-no-zone
+      - ipv4-address-no-zone
+      - ipv6-address-no-zone";
+      reference
+        "RFC 6991: Common YANG Data Types";
+
+    }
+
+    revision "2010-09-24" {
+      description "Initial revision.";
+      reference
+        "RFC 6021: Common YANG Data Types";
+
+    }
+
+
+    typedef ip-version {
+      type enumeration {
+        enum "unknown" {
+          value 0;
+          description
+            "An unknown or unspecified version of the Internet
+          protocol.";
+        }
+        enum "ipv4" {
+          value 1;
+          description
+            "The IPv4 protocol as defined in RFC 791.";
+        }
+        enum "ipv6" {
+          value 2;
+          description
+            "The IPv6 protocol as defined in RFC 2460.";
+        }
+      }
+      description
+        "This value represents the version of the IP protocol.
+
+      In the value set and its semantics, this type is equivalent
+      to the InetVersion textual convention of the SMIv2.";
+      reference
+        "RFC  791: Internet Protocol
+         RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+         RFC 4001: Textual Conventions for Internet Network Addresses";
+
+    }
+
+    typedef dscp {
+      type uint8 {
+        range "0..63";
+      }
+      description
+        "The dscp type represents a Differentiated Services Code Point
+      that may be used for marking packets in a traffic stream.
+      In the value set and its semantics, this type is equivalent
+      to the Dscp textual convention of the SMIv2.";
+      reference
+        "RFC 3289: Management Information Base for the Differentiated
+        	  Services Architecture
+         RFC 2474: Definition of the Differentiated Services Field
+        	  (DS Field) in the IPv4 and IPv6 Headers
+         RFC 2780: IANA Allocation Guidelines For Values In
+        	  the Internet Protocol and Related Headers";
+
+    }
+
+    typedef ipv6-flow-label {
+      type uint32 {
+        range "0..1048575";
+      }
+      description
+        "The ipv6-flow-label type represents the flow identifier or Flow
+      Label in an IPv6 packet header that may be used to
+      discriminate traffic flows.
+
+      In the value set and its semantics, this type is equivalent
+      to the IPv6FlowLabel textual convention of the SMIv2.";
+      reference
+        "RFC 3595: Textual Conventions for IPv6 Flow Label
+         RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
+
+    }
+
+    typedef port-number {
+      type uint16 {
+        range "0..65535";
+      }
+      description
+        "The port-number type represents a 16-bit port number of an
+      Internet transport-layer protocol such as UDP, TCP, DCCP, or
+      SCTP.  Port numbers are assigned by IANA.  A current list of
+      all assignments is available from <http://www.iana.org/>.
+
+      Note that the port number value zero is reserved by IANA.  In
+      situations where the value zero does not make sense, it can
+      be excluded by subtyping the port-number type.
+      In the value set and its semantics, this type is equivalent
+      to the InetPortNumber textual convention of the SMIv2.";
+      reference
+        "RFC  768: User Datagram Protocol
+         RFC  793: Transmission Control Protocol
+         RFC 4960: Stream Control Transmission Protocol
+         RFC 4340: Datagram Congestion Control Protocol (DCCP)
+         RFC 4001: Textual Conventions for Internet Network Addresses";
+
+    }
+
+    typedef as-number {
+      type uint32;
+      description
+        "The as-number type represents autonomous system numbers
+      which identify an Autonomous System (AS).  An AS is a set
+      of routers under a single technical administration, using
+      an interior gateway protocol and common metrics to route
+      packets within the AS, and using an exterior gateway
+      protocol to route packets to other ASes.  IANA maintains
+      the AS number space and has delegated large parts to the
+      regional registries.
+
+      Autonomous system numbers were originally limited to 16
+      bits.  BGP extensions have enlarged the autonomous system
+      number space to 32 bits.  This type therefore uses an uint32
+      base type without a range restriction in order to support
+      a larger autonomous system number space.
+
+      In the value set and its semantics, this type is equivalent
+      to the InetAutonomousSystemNumber textual convention of
+      the SMIv2.";
+      reference
+        "RFC 1930: Guidelines for creation, selection, and registration
+        	  of an Autonomous System (AS)
+         RFC 4271: A Border Gateway Protocol 4 (BGP-4)
+         RFC 4001: Textual Conventions for Internet Network Addresses
+         RFC 6793: BGP Support for Four-Octet Autonomous System (AS)
+        	  Number Space";
+
+    }
+
+    typedef ip-address {
+      type union {
+        type ipv4-address;
+        type ipv6-address;
+      }
+      description
+        "The ip-address type represents an IP address and is IP
+      version neutral.  The format of the textual representation
+      implies the IP version.  This type supports scoped addresses
+      by allowing zone identifiers in the address format.";
+      reference
+        "RFC 4007: IPv6 Scoped Address Architecture";
+
+    }
+
+    typedef ipv4-address {
+      type string {
+        pattern
+          '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?';
+      }
+      description
+        "The ipv4-address type represents an IPv4 address in
+       dotted-quad notation.  The IPv4 address may include a zone
+       index, separated by a % sign.
+
+       The zone index is used to disambiguate identical address
+       values.  For link-local addresses, the zone index will
+       typically be the interface index number or the name of an
+       interface.  If the zone index is not present, the default
+       zone of the device will be used.
+
+       The canonical format for the zone index is the numerical
+       format";
+    }
+
+    typedef ipv6-address {
+      type string {
+        pattern
+          '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(%[\p{N}\p{L}]+)?';
+        pattern
+          '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)(%.+)?';
+      }
+      description
+        "The ipv6-address type represents an IPv6 address in full,
+      mixed, shortened, and shortened-mixed notation.  The IPv6
+      address may include a zone index, separated by a % sign.
+
+      The zone index is used to disambiguate identical address
+      values.  For link-local addresses, the zone index will
+      typically be the interface index number or the name of an
+      interface.  If the zone index is not present, the default
+      zone of the device will be used.
+
+
+
+      The canonical format of IPv6 addresses uses the textual
+      representation defined in Section 4 of RFC 5952.  The
+      canonical format for the zone index is the numerical
+      format as described in Section 11.2 of RFC 4007.";
+      reference
+        "RFC 4291: IP Version 6 Addressing Architecture
+         RFC 4007: IPv6 Scoped Address Architecture
+         RFC 5952: A Recommendation for IPv6 Address Text
+        	  Representation";
+
+    }
+
+    typedef ip-address-no-zone {
+      type union {
+        type ipv4-address-no-zone;
+        type ipv6-address-no-zone;
+      }
+      description
+        "The ip-address-no-zone type represents an IP address and is
+      IP version neutral.  The format of the textual representation
+      implies the IP version.  This type does not support scoped
+      addresses since it does not allow zone identifiers in the
+      address format.";
+      reference
+        "RFC 4007: IPv6 Scoped Address Architecture";
+
+    }
+
+    typedef ipv4-address-no-zone {
+      type ipv4-address {
+        pattern '[0-9\.]*';
+      }
+      description
+        "An IPv4 address without a zone index.  This type, derived from
+       ipv4-address, may be used in situations where the zone is
+       known from the context and hence no zone index is needed.";
+    }
+
+    typedef ipv6-address-no-zone {
+      type ipv6-address {
+        pattern '[0-9a-fA-F:\.]*';
+      }
+      description
+        "An IPv6 address without a zone index.  This type, derived from
+       ipv6-address, may be used in situations where the zone is
+       known from the context and hence no zone index is needed.";
+      reference
+        "RFC 4291: IP Version 6 Addressing Architecture
+         RFC 4007: IPv6 Scoped Address Architecture
+         RFC 5952: A Recommendation for IPv6 Address Text
+        	  Representation";
+
+    }
+
+    typedef ip-prefix {
+      type union {
+        type ipv4-prefix;
+        type ipv6-prefix;
+      }
+      description
+        "The ip-prefix type represents an IP prefix and is IP
+      version neutral.  The format of the textual representations
+      implies the IP version.";
+    }
+
+    typedef ipv4-prefix {
+      type string {
+        pattern
+          '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])/(([0-9])|([1-2][0-9])|(3[0-2]))';
+      }
+      description
+        "The ipv4-prefix type represents an IPv4 address prefix.
+      The prefix length is given by the number following the
+      slash character and must be less than or equal to 32.
+
+      A prefix length value of n corresponds to an IP address
+      mask that has n contiguous 1-bits from the most
+      significant bit (MSB) and all other bits set to 0.
+
+      The canonical format of an IPv4 prefix has all bits of
+      the IPv4 address set to zero that are not part of the
+      IPv4 prefix.";
+    }
+
+    typedef ipv6-prefix {
+      type string {
+        pattern
+          '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
+        pattern
+          '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)(/.+)';
+      }
+      description
+        "The ipv6-prefix type represents an IPv6 address prefix.
+      The prefix length is given by the number following the
+      slash character and must be less than or equal to 128.
+
+      A prefix length value of n corresponds to an IP address
+      mask that has n contiguous 1-bits from the most
+      significant bit (MSB) and all other bits set to 0.
+
+      The IPv6 address should have all bits that do not belong
+      to the prefix set to zero.
+
+      The canonical format of an IPv6 prefix has all bits of
+      the IPv6 address set to zero that are not part of the
+      IPv6 prefix.  Furthermore, the IPv6 address is represented
+      as defined in Section 4 of RFC 5952.";
+      reference
+        "RFC 5952: A Recommendation for IPv6 Address Text
+        	  Representation";
+
+    }
+
+    typedef domain-name {
+      type string {
+        length "1..253";
+        pattern
+          '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)|\.';
+      }
+      description
+        "The domain-name type represents a DNS domain name.  The
+      name SHOULD be fully qualified whenever possible.
+
+      Internet domain names are only loosely specified.  Section
+      3.5 of RFC 1034 recommends a syntax (modified in Section
+      2.1 of RFC 1123).  The pattern above is intended to allow
+      for current practice in domain name use, and some possible
+      future expansion.  It is designed to hold various types of
+      domain names, including names used for A or AAAA records
+      (host names) and other records, such as SRV records.  Note
+      that Internet host names have a stricter syntax (described
+      in RFC 952) than the DNS recommendations in RFCs 1034 and
+      1123, and that systems that want to store host names in
+      schema nodes using the domain-name type are recommended to
+      adhere to this stricter standard to ensure interoperability.
+
+      The encoding of DNS names in the DNS protocol is limited
+      to 255 characters.  Since the encoding consists of labels
+      prefixed by a length bytes and there is a trailing NULL
+      byte, only 253 characters can appear in the textual dotted
+      notation.
+
+      The description clause of schema nodes using the domain-name
+      type MUST describe when and how these names are resolved to
+      IP addresses.  Note that the resolution of a domain-name value
+      may require to query multiple DNS records (e.g., A for IPv4
+      and AAAA for IPv6).  The order of the resolution process and
+      which DNS record takes precedence can either be defined
+      explicitly or may depend on the configuration of the
+      resolver.
+
+      Domain-name values use the US-ASCII encoding.  Their canonical
+      format uses lowercase US-ASCII characters.  Internationalized
+      domain names MUST be A-labels as per RFC 5890.";
+      reference
+        "RFC  952: DoD Internet Host Table Specification
+         RFC 1034: Domain Names - Concepts and Facilities
+         RFC 1123: Requirements for Internet Hosts -- Application
+        	  and Support
+         RFC 2782: A DNS RR for specifying the location of services
+        	  (DNS SRV)
+         RFC 5890: Internationalized Domain Names in Applications
+        	  (IDNA): Definitions and Document Framework";
+
+    }
+
+    typedef host {
+      type union {
+        type ip-address;
+        type domain-name;
+      }
+      description
+        "The host type represents either an IP address or a DNS
+      domain name.";
+    }
+
+    typedef uri {
+      type string;
+      description
+        "The uri type represents a Uniform Resource Identifier
+      (URI) as defined by STD 66.
+
+      Objects using the uri type MUST be in US-ASCII encoding,
+      and MUST be normalized as described by RFC 3986 Sections
+      6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
+      percent-encoding is removed, and all case-insensitive
+      characters are set to lowercase except for hexadecimal
+      digits, which are normalized to uppercase as described in
+      Section 6.2.2.1.
+
+      The purpose of this normalization is to help provide
+      unique URIs.  Note that this normalization is not
+      sufficient to provide uniqueness.  Two URIs that are
+      textually distinct after this normalization may still be
+      equivalent.
+
+      Objects using the uri type may restrict the schemes that
+      they permit.  For example, 'data:' and 'urn:' schemes
+      might not be appropriate.
+
+      A zero-length URI is not a valid URI.  This can be used to
+      express 'URI absent' where required.
+
+      In the value set and its semantics, this type is equivalent
+      to the Uri SMIv2 textual convention defined in RFC 5017.";
+      reference
+        "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
+         RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
+        	  Group: Uniform Resource Identifiers (URIs), URLs,
+        	  and Uniform Resource Names (URNs): Clarifications
+        	  and Recommendations
+         RFC 5017: MIB Textual Conventions for Uniform Resource
+        	  Identifiers (URIs)";
+
+    }
+  }  // module ietf-inet-types
diff --git a/models/openconfig/src/main/yang/comm/ietf-interfaces.yang b/models/openconfig/src/main/yang/comm/ietf-interfaces.yang
new file mode 100644
index 0000000..d02aca2
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/ietf-interfaces.yang
@@ -0,0 +1,703 @@
+module ietf-interfaces {
+
+     namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces";
+     prefix if;
+
+     import ietf-yang-types {
+       prefix yang;
+     }
+
+     organization
+       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+     contact
+       "WG Web:   <http://tools.ietf.org/wg/netmod/>
+        WG List:  <mailto:netmod@ietf.org>
+
+        WG Chair: Thomas Nadeau
+                  <mailto:tnadeau@lucidvision.com>
+
+        WG Chair: Juergen Schoenwaelder
+                  <mailto:j.schoenwaelder@jacobs-university.de>
+
+        Editor:   Martin Bjorklund
+                  <mailto:mbj@tail-f.com>";
+
+     description
+       "This module contains a collection of YANG definitions for
+        managing network interfaces.
+
+        Copyright (c) 2014 IETF Trust and the persons identified as
+        authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, is permitted pursuant to, and subject
+        to the license terms contained in, the Simplified BSD License
+        set forth in Section 4.c of the IETF Trust's Legal Provisions
+        Relating to IETF Documents
+        (http://trustee.ietf.org/license-info).
+
+        This version of this YANG module is part of RFC 7223; see
+        the RFC itself for full legal notices.";
+
+     revision 2014-05-08 {
+       description
+         "Initial revision.";
+       reference
+         "RFC 7223: A YANG Data Model for Interface Management";
+     }
+
+     /*
+      * Typedefs
+      */
+
+     typedef interface-ref {
+       type leafref {
+         path "/if:interfaces/if:interface/if:name";
+       }
+       description
+         "This type is used by data models that need to reference
+          configured interfaces.";
+     }
+
+     typedef interface-state-ref {
+       type leafref {
+         path "/if:interfaces-state/if:interface/if:name";
+       }
+       description
+         "This type is used by data models that need to reference
+          the operationally present interfaces.";
+     }
+
+     /*
+      * Identities
+      */
+
+     identity interface-type {
+       description
+         "Base identity from which specific interface types are
+          derived.";
+     }
+
+     /*
+      * Features
+      */
+
+     feature arbitrary-names {
+       description
+         "This feature indicates that the device allows user-controlled
+          interfaces to be named arbitrarily.";
+     }
+
+
+     feature pre-provisioning {
+       description
+         "This feature indicates that the device supports
+          pre-provisioning of interface configuration, i.e., it is
+          possible to configure an interface whose physical interface
+          hardware is not present on the device.";
+     }
+
+     feature if-mib {
+       description
+         "This feature indicates that the device implements
+          the IF-MIB.";
+       reference
+         "RFC 2863: The Interfaces Group MIB";
+     }
+
+     /*
+      * Configuration data nodes
+      */
+
+     container interfaces {
+       description
+         "Interface configuration parameters.";
+
+       list interface {
+         key "name";
+
+         description
+           "The list of configured interfaces on the device.
+
+            The operational state of an interface is available in the
+            /interfaces-state/interface list.  If the configuration of a
+            system-controlled interface cannot be used by the system
+            (e.g., the interface hardware present does not match the
+            interface type), then the configuration is not applied to
+            the system-controlled interface shown in the
+            /interfaces-state/interface list.  If the configuration
+            of a user-controlled interface cannot be used by the system,
+            the configured interface is not instantiated in the
+            /interfaces-state/interface list.";
+
+        leaf name {
+           type string;
+           description
+             "The name of the interface.
+
+              A device MAY restrict the allowed values for this leaf,
+              possibly depending on the type of the interface.
+
+
+              For system-controlled interfaces, this leaf is the
+              device-specific name of the interface.  The 'config false'
+              list /interfaces-state/interface contains the currently
+              existing interfaces on the device.
+
+              If a client tries to create configuration for a
+              system-controlled interface that is not present in the
+              /interfaces-state/interface list, the server MAY reject
+              the request if the implementation does not support
+              pre-provisioning of interfaces or if the name refers to
+              an interface that can never exist in the system.  A
+              NETCONF server MUST reply with an rpc-error with the
+              error-tag 'invalid-value' in this case.
+
+              If the device supports pre-provisioning of interface
+              configuration, the 'pre-provisioning' feature is
+              advertised.
+
+              If the device allows arbitrarily named user-controlled
+              interfaces, the 'arbitrary-names' feature is advertised.
+
+              When a configured user-controlled interface is created by
+              the system, it is instantiated with the same name in the
+              /interface-state/interface list.";
+         }
+
+         leaf description {
+           type string;
+           description
+             "A textual description of the interface.
+
+              A server implementation MAY map this leaf to the ifAlias
+              MIB object.  Such an implementation needs to use some
+              mechanism to handle the differences in size and characters
+              allowed between this leaf and ifAlias.  The definition of
+              such a mechanism is outside the scope of this document.
+
+              Since ifAlias is defined to be stored in non-volatile
+              storage, the MIB implementation MUST map ifAlias to the
+              value of 'description' in the persistently stored
+              datastore.
+
+              Specifically, if the device supports ':startup', when
+              ifAlias is read the device MUST return the value of
+              'description' in the 'startup' datastore, and when it is
+              written, it MUST be written to the 'running' and 'startup'
+              datastores.  Note that it is up to the implementation to
+
+              decide whether to modify this single leaf in 'startup' or
+              perform an implicit copy-config from 'running' to
+              'startup'.
+
+              If the device does not support ':startup', ifAlias MUST
+              be mapped to the 'description' leaf in the 'running'
+              datastore.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifAlias";
+         }
+
+         leaf type {
+           type identityref {
+             base interface-type;
+           }
+           mandatory true;
+           description
+             "The type of the interface.
+
+              When an interface entry is created, a server MAY
+              initialize the type leaf with a valid value, e.g., if it
+              is possible to derive the type from the name of the
+              interface.
+
+              If a client tries to set the type of an interface to a
+              value that can never be used by the system, e.g., if the
+              type is not supported or if the type does not match the
+              name of the interface, the server MUST reject the request.
+              A NETCONF server MUST reply with an rpc-error with the
+              error-tag 'invalid-value' in this case.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifType";
+         }
+
+         leaf enabled {
+           type boolean;
+           default "true";
+           description
+             "This leaf contains the configured, desired state of the
+              interface.
+
+              Systems that implement the IF-MIB use the value of this
+              leaf in the 'running' datastore to set
+              IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry
+              has been initialized, as described in RFC 2863.
+
+              Changes in this leaf in the 'running' datastore are
+              reflected in ifAdminStatus, but if ifAdminStatus is
+              changed over SNMP, this leaf is not affected.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+         }
+
+         leaf link-up-down-trap-enable {
+           if-feature if-mib;
+           type enumeration {
+             enum enabled {
+               value 1;
+             }
+             enum disabled {
+               value 2;
+             }
+           }
+           description
+             "Controls whether linkUp/linkDown SNMP notifications
+              should be generated for this interface.
+
+              If this node is not configured, the value 'enabled' is
+              operationally used by the server for interfaces that do
+              not operate on top of any other interface (i.e., there are
+              no 'lower-layer-if' entries), and 'disabled' otherwise.";
+           reference
+             "RFC 2863: The Interfaces Group MIB -
+                        ifLinkUpDownTrapEnable";
+         }
+       }
+     }
+
+     /*
+      * Operational state data nodes
+      */
+
+     container interfaces-state {
+       config false;
+       description
+         "Data nodes for the operational state of interfaces.";
+
+       list interface {
+         key "name";
+
+         description
+           "The list of interfaces on the device.
+
+            System-controlled interfaces created by the system are
+            always present in this list, whether they are configured or
+            not.";
+
+         leaf name {
+           type string;
+           description
+             "The name of the interface.
+
+              A server implementation MAY map this leaf to the ifName
+              MIB object.  Such an implementation needs to use some
+              mechanism to handle the differences in size and characters
+              allowed between this leaf and ifName.  The definition of
+              such a mechanism is outside the scope of this document.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifName";
+         }
+
+         leaf type {
+           type identityref {
+             base interface-type;
+           }
+           mandatory true;
+           description
+             "The type of the interface.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifType";
+         }
+
+         leaf admin-status {
+           if-feature if-mib;
+           type enumeration {
+             enum up {
+               value 1;
+               description
+                 "Ready to pass packets.";
+             }
+             enum down {
+               value 2;
+               description
+                 "Not ready to pass packets and not in some test mode.";
+             }
+
+             enum testing {
+               value 3;
+               description
+                 "In some test mode.";
+             }
+           }
+           mandatory true;
+           description
+             "The desired state of the interface.
+
+              This leaf has the same read semantics as ifAdminStatus.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+         }
+
+         leaf oper-status {
+           type enumeration {
+             enum up {
+               value 1;
+               description
+                 "Ready to pass packets.";
+             }
+             enum down {
+               value 2;
+               description
+                 "The interface does not pass any packets.";
+             }
+             enum testing {
+               value 3;
+               description
+                 "In some test mode.  No operational packets can
+                  be passed.";
+             }
+             enum unknown {
+               value 4;
+               description
+                 "Status cannot be determined for some reason.";
+             }
+             enum dormant {
+               value 5;
+               description
+                 "Waiting for some external event.";
+             }
+             enum not-present {
+               value 6;
+               description
+                 "Some component (typically hardware) is missing.";
+             }
+
+             enum lower-layer-down {
+               value 7;
+               description
+                 "Down due to state of lower-layer interface(s).";
+             }
+           }
+           mandatory true;
+           description
+             "The current operational state of the interface.
+
+              This leaf has the same semantics as ifOperStatus.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifOperStatus";
+         }
+
+         leaf last-change {
+           type yang:date-and-time;
+           description
+             "The time the interface entered its current operational
+              state.  If the current state was entered prior to the
+              last re-initialization of the local network management
+              subsystem, then this node is not present.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifLastChange";
+         }
+
+         leaf if-index {
+           if-feature if-mib;
+           type int32 {
+             range "1..2147483647";
+           }
+           mandatory true;
+           description
+             "The ifIndex value for the ifEntry represented by this
+              interface.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifIndex";
+         }
+
+         leaf phys-address {
+           type yang:phys-address;
+           description
+             "The interface's address at its protocol sub-layer.  For
+              example, for an 802.x interface, this object normally
+              contains a Media Access Control (MAC) address.  The
+              interface's media-specific modules must define the bit
+
+
+              and byte ordering and the format of the value of this
+              object.  For interfaces that do not have such an address
+              (e.g., a serial line), this node is not present.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifPhysAddress";
+         }
+
+         leaf-list higher-layer-if {
+           type interface-state-ref;
+           description
+             "A list of references to interfaces layered on top of this
+              interface.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifStackTable";
+         }
+
+         leaf-list lower-layer-if {
+           type interface-state-ref;
+           description
+             "A list of references to interfaces layered underneath this
+              interface.";
+           reference
+             "RFC 2863: The Interfaces Group MIB - ifStackTable";
+         }
+
+         leaf speed {
+           type yang:gauge64;
+           units "bits/second";
+           description
+               "An estimate of the interface's current bandwidth in bits
+                per second.  For interfaces that do not vary in
+                bandwidth or for those where no accurate estimation can
+                be made, this node should contain the nominal bandwidth.
+                For interfaces that have no concept of bandwidth, this
+                node is not present.";
+           reference
+             "RFC 2863: The Interfaces Group MIB -
+                        ifSpeed, ifHighSpeed";
+         }
+
+
+         container statistics {
+           description
+             "A collection of interface-related statistics objects.";
+
+           leaf discontinuity-time {
+             type yang:date-and-time;
+             mandatory true;
+             description
+               "The time on the most recent occasion at which any one or
+                more of this interface's counters suffered a
+                discontinuity.  If no such discontinuities have occurred
+                since the last re-initialization of the local management
+                subsystem, then this node contains the time the local
+                management subsystem re-initialized itself.";
+           }
+
+           leaf in-octets {
+             type yang:counter64;
+             description
+               "The total number of octets received on the interface,
+                including framing characters.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifHCInOctets";
+           }
+
+           leaf in-unicast-pkts {
+             type yang:counter64;
+             description
+               "The number of packets, delivered by this sub-layer to a
+                higher (sub-)layer, that were not addressed to a
+                multicast or broadcast address at this sub-layer.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts";
+           }
+
+           leaf in-broadcast-pkts {
+             type yang:counter64;
+             description
+               "The number of packets, delivered by this sub-layer to a
+                higher (sub-)layer, that were addressed to a broadcast
+                address at this sub-layer.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB -
+                          ifHCInBroadcastPkts";
+           }
+
+           leaf in-multicast-pkts {
+             type yang:counter64;
+             description
+               "The number of packets, delivered by this sub-layer to a
+                higher (sub-)layer, that were addressed to a multicast
+                address at this sub-layer.  For a MAC-layer protocol,
+                this includes both Group and Functional addresses.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB -
+                          ifHCInMulticastPkts";
+           }
+
+           leaf in-discards {
+             type yang:counter32;
+             description
+               "The number of inbound packets that were chosen to be
+                discarded even though no errors had been detected to
+                prevent their being deliverable to a higher-layer
+                protocol.  One possible reason for discarding such a
+                packet could be to free up buffer space.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifInDiscards";
+           }
+
+           leaf in-errors {
+             type yang:counter32;
+             description
+               "For packet-oriented interfaces, the number of inbound
+                packets that contained errors preventing them from being
+                deliverable to a higher-layer protocol.  For character-
+                oriented or fixed-length interfaces, the number of
+                inbound transmission units that contained errors
+                preventing them from being deliverable to a higher-layer
+                protocol.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifInErrors";
+           }
+
+           leaf in-unknown-protos {
+             type yang:counter32;
+             description
+               "For packet-oriented interfaces, the number of packets
+                received via the interface that were discarded because
+                of an unknown or unsupported protocol.  For
+                character-oriented or fixed-length interfaces that
+                support protocol multiplexing, the number of
+                transmission units received via the interface that were
+                discarded because of an unknown or unsupported protocol.
+                For any interface that does not support protocol
+                multiplexing, this counter is not present.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";
+           }
+
+           leaf out-octets {
+             type yang:counter64;
+             description
+               "The total number of octets transmitted out of the
+                interface, including framing characters.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifHCOutOctets";
+           }
+
+           leaf out-unicast-pkts {
+             type yang:counter64;
+             description
+               "The total number of packets that higher-level protocols
+                requested be transmitted, and that were not addressed
+                to a multicast or broadcast address at this sub-layer,
+                including those that were discarded or not sent.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts";
+           }
+
+           leaf out-broadcast-pkts {
+             type yang:counter64;
+             description
+               "The total number of packets that higher-level protocols
+                requested be transmitted, and that were addressed to a
+                broadcast address at this sub-layer, including those
+                that were discarded or not sent.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB -
+                          ifHCOutBroadcastPkts";
+           }
+
+           leaf out-multicast-pkts {
+             type yang:counter64;
+             description
+               "The total number of packets that higher-level protocols
+                requested be transmitted, and that were addressed to a
+                multicast address at this sub-layer, including those
+                that were discarded or not sent.  For a MAC-layer
+                protocol, this includes both Group and Functional
+                addresses.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB -
+                          ifHCOutMulticastPkts";
+           }
+
+           leaf out-discards {
+             type yang:counter32;
+             description
+               "The number of outbound packets that were chosen to be
+                discarded even though no errors had been detected to
+                prevent their being transmitted.  One possible reason
+                for discarding such a packet could be to free up buffer
+                space.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifOutDiscards";
+           }
+
+           leaf out-errors {
+             type yang:counter32;
+             description
+               "For packet-oriented interfaces, the number of outbound
+                packets that could not be transmitted because of errors.
+                For character-oriented or fixed-length interfaces, the
+                number of outbound transmission units that could not be
+                transmitted because of errors.
+
+                Discontinuities in the value of this counter can occur
+                at re-initialization of the management system, and at
+                other times as indicated by the value of
+                'discontinuity-time'.";
+             reference
+               "RFC 2863: The Interfaces Group MIB - ifOutErrors";
+           }
+         }
+       }
+     }
+   }
diff --git a/models/openconfig/src/main/yang/comm/ietf-yang-types.yang b/models/openconfig/src/main/yang/comm/ietf-yang-types.yang
new file mode 100644
index 0000000..9a543fa
--- /dev/null
+++ b/models/openconfig/src/main/yang/comm/ietf-yang-types.yang
@@ -0,0 +1,490 @@
+  module ietf-yang-types {
+
+    yang-version 1;
+
+    namespace
+      "urn:ietf:params:xml:ns:yang:ietf-yang-types";
+
+    prefix yang;
+
+    organization
+      "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+    contact
+      "WG Web:   <http://tools.ietf.org/wg/netmod/>
+    WG List:  <mailto:netmod@ietf.org>
+
+    WG Chair: David Kessens
+              <mailto:david.kessens@nsn.com>
+
+    WG Chair: Juergen Schoenwaelder
+              <mailto:j.schoenwaelder@jacobs-university.de>
+
+    Editor:   Juergen Schoenwaelder
+              <mailto:j.schoenwaelder@jacobs-university.de>";
+
+    description
+      "This module contains a collection of generally useful derived
+    YANG data types.
+
+    Copyright (c) 2013 IETF Trust and the persons identified as
+    authors of the code.  All rights reserved.
+
+    Redistribution and use in source and binary forms, with or
+    without modification, is permitted pursuant to, and subject
+    to the license terms contained in, the Simplified BSD License
+    set forth in Section 4.c of the IETF Trust's Legal Provisions
+    Relating to IETF Documents
+    (http://trustee.ietf.org/license-info).
+
+    This version of this YANG module is part of RFC 6991; see
+    the RFC itself for full legal notices.";
+
+    revision "2013-07-15" {
+      description
+        "This revision adds the following new data types:
+      - yang-identifier
+      - hex-string
+      - uuid
+      - dotted-quad";
+      reference
+        "RFC 6991: Common YANG Data Types";
+
+    }
+
+    revision "2010-09-24" {
+      description "Initial revision.";
+      reference
+        "RFC 6021: Common YANG Data Types";
+
+    }
+
+
+    typedef counter32 {
+      type uint32;
+      description
+        "The counter32 type represents a non-negative integer
+      that monotonically increases until it reaches a
+      maximum value of 2^32-1 (4294967295 decimal), when it
+      wraps around and starts increasing again from zero.
+
+      Counters have no defined 'initial' value, and thus, a
+      single value of a counter has (in general) no information
+      content.  Discontinuities in the monotonically increasing
+      value normally occur at re-initialization of the
+      management system, and at other times as specified in the
+      description of a schema node using this type.  If such
+      other times can occur, for example, the creation of
+      a schema node of type counter32 at times other than
+      re-initialization, then a corresponding schema node
+      should be defined, with an appropriate type, to indicate
+      the last discontinuity.
+
+      The counter32 type should not be used for configuration
+      schema nodes.  A default statement SHOULD NOT be used in
+      combination with the type counter32.
+
+      In the value set and its semantics, this type is equivalent
+      to the Counter32 type of the SMIv2.";
+      reference
+        "RFC 2578: Structure of Management Information Version 2
+        	  (SMIv2)";
+
+    }
+
+    typedef zero-based-counter32 {
+      type counter32;
+      default "0";
+      description
+        "The zero-based-counter32 type represents a counter32
+      that has the defined 'initial' value zero.
+
+      A schema node of this type will be set to zero (0) on creation
+      and will thereafter increase monotonically until it reaches
+      a maximum value of 2^32-1 (4294967295 decimal), when it
+      wraps around and starts increasing again from zero.
+
+      Provided that an application discovers a new schema node
+      of this type within the minimum time to wrap, it can use the
+      'initial' value as a delta.  It is important for a management
+      station to be aware of this minimum time and the actual time
+      between polls, and to discard data if the actual time is too
+      long or there is no defined minimum time.
+
+      In the value set and its semantics, this type is equivalent
+      to the ZeroBasedCounter32 textual convention of the SMIv2.";
+      reference
+        "RFC 4502: Remote Network Monitoring Management Information
+        	  Base Version 2";
+
+    }
+
+    typedef counter64 {
+      type uint64;
+      description
+        "The counter64 type represents a non-negative integer
+      that monotonically increases until it reaches a
+      maximum value of 2^64-1 (18446744073709551615 decimal),
+      when it wraps around and starts increasing again from zero.
+
+      Counters have no defined 'initial' value, and thus, a
+      single value of a counter has (in general) no information
+      content.  Discontinuities in the monotonically increasing
+      value normally occur at re-initialization of the
+      management system, and at other times as specified in the
+      description of a schema node using this type.  If such
+      other times can occur, for example, the creation of
+      a schema node of type counter64 at times other than
+      re-initialization, then a corresponding schema node
+      should be defined, with an appropriate type, to indicate
+      the last discontinuity.
+
+      The counter64 type should not be used for configuration
+      schema nodes.  A default statement SHOULD NOT be used in
+      combination with the type counter64.
+
+      In the value set and its semantics, this type is equivalent
+      to the Counter64 type of the SMIv2.";
+      reference
+        "RFC 2578: Structure of Management Information Version 2
+        	  (SMIv2)";
+
+    }
+
+    typedef zero-based-counter64 {
+      type counter64;
+      default "0";
+      description
+        "The zero-based-counter64 type represents a counter64 that
+      has the defined 'initial' value zero.
+
+
+
+
+      A schema node of this type will be set to zero (0) on creation
+      and will thereafter increase monotonically until it reaches
+      a maximum value of 2^64-1 (18446744073709551615 decimal),
+      when it wraps around and starts increasing again from zero.
+
+      Provided that an application discovers a new schema node
+      of this type within the minimum time to wrap, it can use the
+      'initial' value as a delta.  It is important for a management
+      station to be aware of this minimum time and the actual time
+      between polls, and to discard data if the actual time is too
+      long or there is no defined minimum time.
+
+      In the value set and its semantics, this type is equivalent
+      to the ZeroBasedCounter64 textual convention of the SMIv2.";
+      reference
+        "RFC 2856: Textual Conventions for Additional High Capacity
+        	  Data Types";
+
+    }
+
+    typedef gauge32 {
+      type uint32;
+      description
+        "The gauge32 type represents a non-negative integer, which
+      may increase or decrease, but shall never exceed a maximum
+      value, nor fall below a minimum value.  The maximum value
+      cannot be greater than 2^32-1 (4294967295 decimal), and
+      the minimum value cannot be smaller than 0.  The value of
+      a gauge32 has its maximum value whenever the information
+      being modeled is greater than or equal to its maximum
+      value, and has its minimum value whenever the information
+      being modeled is smaller than or equal to its minimum value.
+      If the information being modeled subsequently decreases
+      below (increases above) the maximum (minimum) value, the
+      gauge32 also decreases (increases).
+
+      In the value set and its semantics, this type is equivalent
+      to the Gauge32 type of the SMIv2.";
+      reference
+        "RFC 2578: Structure of Management Information Version 2
+        	  (SMIv2)";
+
+    }
+
+    typedef gauge64 {
+      type uint64;
+      description
+        "The gauge64 type represents a non-negative integer, which
+      may increase or decrease, but shall never exceed a maximum
+      value, nor fall below a minimum value.  The maximum value
+      cannot be greater than 2^64-1 (18446744073709551615), and
+      the minimum value cannot be smaller than 0.  The value of
+      a gauge64 has its maximum value whenever the information
+      being modeled is greater than or equal to its maximum
+      value, and has its minimum value whenever the information
+      being modeled is smaller than or equal to its minimum value.
+      If the information being modeled subsequently decreases
+      below (increases above) the maximum (minimum) value, the
+      gauge64 also decreases (increases).
+
+      In the value set and its semantics, this type is equivalent
+      to the CounterBasedGauge64 SMIv2 textual convention defined
+      in RFC 2856";
+      reference
+        "RFC 2856: Textual Conventions for Additional High Capacity
+        	  Data Types";
+
+    }
+
+    typedef object-identifier {
+      type string {
+        pattern
+          '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*';
+      }
+      description
+        "The object-identifier type represents administratively
+      assigned names in a registration-hierarchical-name tree.
+
+      Values of this type are denoted as a sequence of numerical
+      non-negative sub-identifier values.  Each sub-identifier
+      value MUST NOT exceed 2^32-1 (4294967295).  Sub-identifiers
+      are separated by single dots and without any intermediate
+      whitespace.
+
+      The ASN.1 standard restricts the value space of the first
+      sub-identifier to 0, 1, or 2.  Furthermore, the value space
+      of the second sub-identifier is restricted to the range
+      0 to 39 if the first sub-identifier is 0 or 1.  Finally,
+      the ASN.1 standard requires that an object identifier
+      has always at least two sub-identifiers.  The pattern
+      captures these restrictions.
+
+      Although the number of sub-identifiers is not limited,
+      module designers should realize that there may be
+      implementations that stick with the SMIv2 limit of 128
+      sub-identifiers.
+
+      This type is a superset of the SMIv2 OBJECT IDENTIFIER type
+      since it is not restricted to 128 sub-identifiers.  Hence,
+      this type SHOULD NOT be used to represent the SMIv2 OBJECT
+      IDENTIFIER type; the object-identifier-128 type SHOULD be
+      used instead.";
+      reference
+        "ISO9834-1: Information technology -- Open Systems
+        Interconnection -- Procedures for the operation of OSI
+        Registration Authorities: General procedures and top
+        arcs of the ASN.1 Object Identifier tree";
+
+    }
+
+    typedef object-identifier-128 {
+      type object-identifier {
+        pattern '\d*(\.\d*){1,127}';
+      }
+      description
+        "This type represents object-identifiers restricted to 128
+      sub-identifiers.
+
+      In the value set and its semantics, this type is equivalent
+      to the OBJECT IDENTIFIER type of the SMIv2.";
+      reference
+        "RFC 2578: Structure of Management Information Version 2
+        	  (SMIv2)";
+
+    }
+
+    typedef yang-identifier {
+      type string {
+        length "1..max";
+        pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*';
+        pattern
+          '.|..|[^xX].*|.[^mM].*|..[^lL].*';
+      }
+      description
+        "A YANG identifier string as defined by the 'identifier'
+       rule in Section 12 of RFC 6020.  An identifier must
+       start with an alphabetic character or an underscore
+       followed by an arbitrary sequence of alphabetic or
+       numeric characters, underscores, hyphens, or dots.
+
+       A YANG identifier MUST NOT start with any possible
+       combination of the lowercase or uppercase character
+       sequence 'xml'.";
+      reference
+        "RFC 6020: YANG - A Data Modeling Language for the Network
+        	  Configuration Protocol (NETCONF)";
+
+    }
+
+    typedef date-and-time {
+      type string {
+        pattern
+          '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?(Z|[\+\-]\d{2}:\d{2})';
+      }
+      description
+        "The date-and-time type is a profile of the ISO 8601
+      standard for representation of dates and times using the
+      Gregorian calendar.  The profile is defined by the
+      date-time production in Section 5.6 of RFC 3339.
+
+      The date-and-time type is compatible with the dateTime XML
+      schema type with the following notable exceptions:
+
+      (a) The date-and-time type does not allow negative years.
+
+      (b) The date-and-time time-offset -00:00 indicates an unknown
+          time zone (see RFC 3339) while -00:00 and +00:00 and Z
+          all represent the same time zone in dateTime.
+
+      (c) The canonical format (see below) of data-and-time values
+          differs from the canonical format used by the dateTime XML
+          schema type, which requires all times to be in UTC using
+          the time-offset 'Z'.
+
+      This type is not equivalent to the DateAndTime textual
+      convention of the SMIv2 since RFC 3339 uses a different
+      separator between full-date and full-time and provides
+      higher resolution of time-secfrac.
+
+      The canonical format for date-and-time values with a known time
+      zone uses a numeric time zone offset that is calculated using
+      the device's configured known offset to UTC time.  A change of
+      the device's offset to UTC time will cause date-and-time values
+      to change accordingly.  Such changes might happen periodically
+      in case a server follows automatically daylight saving time
+      (DST) time zone offset changes.  The canonical format for
+      date-and-time values with an unknown time zone (usually
+      referring to the notion of local time) uses the time-offset
+      -00:00.";
+      reference
+        "RFC 3339: Date and Time on the Internet: Timestamps
+         RFC 2579: Textual Conventions for SMIv2
+        XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
+
+    }
+
+    typedef timeticks {
+      type uint32;
+      description
+        "The timeticks type represents a non-negative integer that
+      represents the time, modulo 2^32 (4294967296 decimal), in
+      hundredths of a second between two epochs.  When a schema
+      node is defined that uses this type, the description of
+      the schema node identifies both of the reference epochs.
+
+      In the value set and its semantics, this type is equivalent
+      to the TimeTicks type of the SMIv2.";
+      reference
+        "RFC 2578: Structure of Management Information Version 2
+        	  (SMIv2)";
+
+    }
+
+    typedef timestamp {
+      type timeticks;
+      description
+        "The timestamp type represents the value of an associated
+      timeticks schema node at which a specific occurrence
+      happened.  The specific occurrence must be defined in the
+      description of any schema node defined using this type.  When
+      the specific occurrence occurred prior to the last time the
+      associated timeticks attribute was zero, then the timestamp
+      value is zero.  Note that this requires all timestamp values
+      to be reset to zero when the value of the associated timeticks
+      attribute reaches 497+ days and wraps around to zero.
+
+      The associated timeticks schema node must be specified
+      in the description of any schema node using this type.
+
+      In the value set and its semantics, this type is equivalent
+      to the TimeStamp textual convention of the SMIv2.";
+      reference
+        "RFC 2579: Textual Conventions for SMIv2";
+
+    }
+
+    typedef phys-address {
+      type string {
+        pattern
+          '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
+      }
+      description
+        "Represents media- or physical-level addresses represented
+      as a sequence octets, each octet represented by two hexadecimal
+      numbers.  Octets are separated by colons.  The canonical
+      representation uses lowercase characters.
+
+      In the value set and its semantics, this type is equivalent
+      to the PhysAddress textual convention of the SMIv2.";
+      reference
+        "RFC 2579: Textual Conventions for SMIv2";
+
+    }
+
+    typedef mac-address {
+      type string {
+        pattern
+          '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
+      }
+      description
+        "The mac-address type represents an IEEE 802 MAC address.
+      The canonical representation uses lowercase characters.
+
+      In the value set and its semantics, this type is equivalent
+      to the MacAddress textual convention of the SMIv2.";
+      reference
+        "IEEE 802: IEEE Standard for Local and Metropolitan Area
+        	  Networks: Overview and Architecture
+         RFC 2579: Textual Conventions for SMIv2";
+
+    }
+
+    typedef xpath1.0 {
+      type string;
+      description
+        "This type represents an XPATH 1.0 expression.
+
+      When a schema node is defined that uses this type, the
+      description of the schema node MUST specify the XPath
+      context in which the XPath expression is evaluated.";
+      reference
+        "XPATH: XML Path Language (XPath) Version 1.0";
+
+    }
+
+    typedef hex-string {
+      type string {
+        pattern
+          '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
+      }
+      description
+        "A hexadecimal string with octets represented as hex digits
+      separated by colons.  The canonical representation uses
+      lowercase characters.";
+    }
+
+    typedef uuid {
+      type string {
+        pattern
+          '[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}';
+      }
+      description
+        "A Universally Unique IDentifier in the string representation
+      defined in RFC 4122.  The canonical representation uses
+      lowercase characters.
+
+      The following is an example of a UUID in string representation:
+      f81d4fae-7dec-11d0-a765-00a0c91e6bf6
+      ";
+      reference
+        "RFC 4122: A Universally Unique IDentifier (UUID) URN
+        	  Namespace";
+
+    }
+
+    typedef dotted-quad {
+      type string {
+        pattern
+          '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])';
+      }
+      description
+        "An unsigned 32-bit number expressed in the dotted-quad
+       notation, i.e., four octets written as decimal numbers
+       and separated with the '.' (full stop) character.";
+    }
+  }  // module ietf-yang-types
+