| module ietf-te-topology { | |
| yang-version 1; | |
| namespace "urn:ietf:params:xml:ns:yang:ietf-te-topology"; | |
| // replace with IANA namespace when assigned | |
| prefix "tet"; | |
| import ietf-inet-types { | |
| prefix "inet"; | |
| } | |
| import ietf-schedule { | |
| prefix "sch"; | |
| } | |
| import ietf-te-types { | |
| prefix "te-types"; | |
| } | |
| import ietf-network { | |
| prefix "nw"; | |
| } | |
| import ietf-network-topology { | |
| prefix "nt"; | |
| } | |
| organization | |
| "Traffic Engineering Architecture and Signaling (TEAS) | |
| Working Group"; | |
| contact | |
| "WG Web: <http://tools.ietf.org/wg/teas/> | |
| WG List: <mailto:teas@ietf.org> | |
| WG Chair: Lou Berger | |
| <mailto:lberger@labn.net> | |
| WG Chair: Vishnu Pavan Beeram | |
| <mailto:vbeeram@juniper.net> | |
| Editor: Xufeng Liu | |
| <mailto:xliu@kuatrotech.com> | |
| Editor: Igor Bryskin | |
| <mailto:Igor.Bryskin@huawei.com> | |
| Editor: Vishnu Pavan Beeram | |
| <mailto:vbeeram@juniper.net> | |
| Editor: Tarek Saad | |
| <mailto:tsaad@cisco.com> | |
| Editor: Himanshu Shah | |
| <mailto:hshah@ciena.com> | |
| Editor: Oscar Gonzalez De Dios | |
| <mailto:oscar.gonzalezdedios@telefonica.com>"; | |
| description "TE topology model"; | |
| revision "2016-03-17" { | |
| description "Initial revision"; | |
| reference "TBD"; | |
| } | |
| /* | |
| * Features | |
| */ | |
| /*feature configuration-schedule { | |
| description | |
| "This feature indicates that the system supports | |
| configuration scheduling."; | |
| } | |
| feature te-topology-hierarchy { | |
| description | |
| "This feature indicates that the system allows underlay | |
| and/or overlay TE topology hierarchy."; | |
| } | |
| feature te-performance-metric { | |
| description | |
| "This feature indicates that the system supports | |
| TE performance metric defined in | |
| RFC7471: OSPF Traffic Engineering (TE) Metric Extensions."; | |
| } | |
| feature template { | |
| description | |
| "This feature indicates that the system supports | |
| template configuration."; | |
| }*/ | |
| /* | |
| * Typedefs | |
| */ | |
| typedef performance-metric-normality { | |
| type enumeration { | |
| enum "unknown" { | |
| value 0; | |
| description | |
| "Unknown."; | |
| } | |
| enum "normal" { | |
| value 1; | |
| description | |
| "Normal."; | |
| } | |
| enum "abnormal" { | |
| value 2; | |
| description | |
| "Abnormal. The anomalous bit is set."; | |
| } | |
| } | |
| description | |
| "Indicates whether a performance metric is normal, abnormal, or | |
| unknown."; | |
| reference | |
| "RFC7471: OSPF Traffic Engineering (TE) Metric Extensions."; | |
| } | |
| typedef te-admin-status { | |
| type enumeration { | |
| enum up { | |
| description | |
| "Enabled."; | |
| } | |
| enum down { | |
| description | |
| "Disabled."; | |
| } | |
| enum testing { | |
| description | |
| "In some test mode."; | |
| } | |
| enum preparing-maintenance { | |
| description | |
| "Resource is disabled in the control plane to prepare for | |
| graceful shutdown for maintenance purposes."; | |
| reference | |
| "RFC5817: Graceful Shutdown in MPLS and Generalized MPLS | |
| Traffic Engineering Networks"; | |
| } | |
| enum maintenance { | |
| description | |
| "Resource is disabled in the data plane for maintenance | |
| purposes."; | |
| } | |
| } | |
| description | |
| "Defines a type representing the administrative status of | |
| a TE resource."; | |
| } | |
| typedef te-global-id { | |
| type uint32; | |
| description | |
| "An identifier to uniquely identify an operator, which can be | |
| either a provider or a client. | |
| The definition of this type is taken from RFC6370 and RFC5003. | |
| This attribute type is used solely to provide a globally | |
| unique context for TE topologies."; | |
| } | |
| typedef te-link-access-type { | |
| type enumeration { | |
| enum point-to-point { | |
| description | |
| "The link is point-to-point."; | |
| } | |
| enum multi-access { | |
| description | |
| "The link is multi-access, including broacast and NBMA."; | |
| } | |
| } | |
| description | |
| "Defines a type representing the access type of a TE link."; | |
| reference | |
| "RFC3630: Traffic Engineering (TE) Extensions to OSPF | |
| Version 2."; | |
| } | |
| typedef te-node-id { | |
| type inet:ip-address; | |
| description | |
| "An identifier for a node in a topology. | |
| The identifier is represented as an IPv4 or IPv6 address. | |
| This attribute is mapped to Router ID in | |
| RFC3630, RFC5329, RFC5305, and RFC 6119."; | |
| } | |
| typedef te-oper-status { | |
| type enumeration { | |
| enum up { | |
| description | |
| "Operational up."; | |
| } | |
| enum down { | |
| description | |
| "Operational down."; | |
| } | |
| enum testing { | |
| description | |
| "In some test mode."; | |
| } | |
| enum unknown { | |
| description | |
| "Status cannot be determined for some reason."; | |
| } | |
| enum preparing-maintenance { | |
| description | |
| "Resource is disabled in the control plane to prepare for | |
| graceful shutdown for maintenance purposes."; | |
| reference | |
| "RFC5817: Graceful Shutdown in MPLS and Generalized MPLS | |
| Traffic Engineering Networks"; | |
| } | |
| enum maintenance { | |
| description | |
| "Resource is disabled in the data plane for maintenance | |
| purposes."; | |
| } | |
| } | |
| description | |
| "Defines a type representing the operational status of | |
| a TE resource."; | |
| } | |
| typedef te-recovery-status { | |
| type enumeration { | |
| enum normal { | |
| description | |
| "Both the recovery and working spans are fully | |
| allocated and active, data traffic is being | |
| transported over (or selected from) the working | |
| span, and no trigger events are reported."; | |
| } | |
| enum recovery-started { | |
| description | |
| "The recovery action has been started, but not completed."; | |
| } | |
| enum recovery-succeeded { | |
| description | |
| "The recovery action has succeeded. The working span has | |
| reported a failure/degrade condition and the user traffic | |
| is being transported (or selected) on the recovery span."; | |
| } | |
| enum recovery-failed { | |
| description | |
| "The recovery action has failed."; | |
| } | |
| enum reversion-started { | |
| description | |
| "The reversion has started."; | |
| } | |
| enum reversion-failed { | |
| description | |
| "The reversion has failed."; | |
| } | |
| enum recovery-unavailable { | |
| description | |
| "The recovery is unavailable -- either as a result of an | |
| operator Lockout command or a failure condition detected | |
| on the recovery span."; | |
| } | |
| enum recovery-admin { | |
| description | |
| "The operator has issued a command switching the user | |
| traffic to the recovery span."; | |
| } | |
| enum wait-to-restore { | |
| description | |
| "The recovery domain is recovering from a failuer/degrade | |
| condition on the working span that is being controlled by | |
| the Wait-to-Restore (WTR) timer."; | |
| } | |
| } | |
| description | |
| "Defines the status of a recovery action."; | |
| reference | |
| "RFC4427: Recovery (Protection and Restoration) Terminology | |
| for Generalized Multi-Protocol Label Switching (GMPLS). | |
| RFC6378: MPLS Transport Profile (MPLS-TP) Linear Protection"; | |
| } | |
| typedef te-template-name { | |
| type string { | |
| pattern '/?([a-zA-Z0-9\-_.]+)(/[a-zA-Z0-9\-_.]+)*'; | |
| } | |
| description | |
| "A type for the name of a TE node template or TE link | |
| template."; | |
| } | |
| typedef te-topology-event-type { | |
| type enumeration { | |
| enum "add" { | |
| value 0; | |
| description | |
| "A TE node or te-link has been added."; | |
| } | |
| enum "remove" { | |
| value 1; | |
| description | |
| "A TE node or te-link has been removed."; | |
| } | |
| enum "update" { | |
| value 2; | |
| description | |
| "A TE node or te-link has been updated."; | |
| } | |
| } | |
| description "TE Event type for notifications"; | |
| } // te-topology-event-type | |
| typedef te-topology-id { | |
| type string { | |
| pattern '/?([a-zA-Z0-9\-_.]+)(/[a-zA-Z0-9\-_.]+)*'; | |
| } | |
| description | |
| "An identifier for a topology."; | |
| } | |
| typedef te-tp-id { | |
| type union { | |
| type uint32; // Unnumbered | |
| type inet:ip-address; // IPv4 or IPv6 address | |
| } | |
| description | |
| "An identifier for a TE link endpoint on a node. | |
| This attribute is mapped to local or remote link identifier in | |
| RFC3630 and RFC5305."; | |
| } | |
| /* | |
| * Identities | |
| */ | |
| /* | |
| * Groupings | |
| */ | |
| grouping information-source-attributes { | |
| description | |
| "The attributes identifying source that has provided the | |
| related information, and the source credibility."; | |
| leaf information-source { | |
| type enumeration { | |
| enum "unknown" { | |
| description "The source is unknown."; | |
| } | |
| enum "locally-configured" { | |
| description "Configured entity."; | |
| } | |
| enum "ospfv2" { | |
| description "OSPFv2."; | |
| } | |
| enum "ospfv3" { | |
| description "OSPFv3."; | |
| } | |
| enum "isis" { | |
| description "ISIS."; | |
| } | |
| enum "system-processed" { | |
| description "System processed entity."; | |
| } | |
| enum "other" { | |
| description "Other source."; | |
| } | |
| } | |
| description | |
| "Indicates the source of the information."; | |
| } | |
| container information-source-state { | |
| description | |
| "The container contains state attributes related to | |
| the information source."; | |
| leaf credibility-preference { | |
| type uint16; | |
| description | |
| "The preference value to calculate the traffic | |
| engineering database credibility value used for | |
| tie-break selection between different | |
| information-source values. | |
| Higher value is more preferable."; | |
| } | |
| container topology { | |
| description | |
| "When the information is processed by the system, | |
| the attributes in this container indicate which topology | |
| is used to process to generate the result information."; | |
| uses te-topology-ref; | |
| } // topology | |
| leaf routing-instance { | |
| type string; | |
| description | |
| "When applicable, this is the name of a routing instance | |
| from which the information is learned."; | |
| } // routing-information | |
| } | |
| } // information-source-attributes | |
| grouping performance-metric-attributes { | |
| description | |
| "Link performance information in real time."; | |
| reference | |
| "RFC7471: OSPF Traffic Engineering (TE) Metric Extensions."; | |
| leaf unidirectional-delay { | |
| type uint32 { | |
| range 0..16777215; | |
| } | |
| description "Delay or latency in micro seconds."; | |
| } | |
| leaf unidirectional-min-delay { | |
| type uint32 { | |
| range 0..16777215; | |
| } | |
| description "Minimum delay or latency in micro seconds."; | |
| } | |
| leaf unidirectional-max-delay { | |
| type uint32 { | |
| range 0..16777215; | |
| } | |
| description "Maximum delay or latency in micro seconds."; | |
| } | |
| leaf unidirectional-delay-variation { | |
| type uint32 { | |
| range 0..16777215; | |
| } | |
| description "Delay variation in micro seconds."; | |
| } | |
| leaf unidirectional-packet-loss { | |
| type decimal64 { | |
| /*fraction-digits 6; | |
| range "0 .. 50.331642";*/ | |
| } | |
| description | |
| "Packet loss as a percentage of the total traffic sent | |
| over a configurable interval. The finest precision is | |
| 0.000003%."; | |
| } | |
| leaf unidirectional-residual-bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Residual bandwidth that subtracts tunnel | |
| reservations from Maximum Bandwidth (or link capacity) | |
| [RFC3630] and provides an aggregated remainder across QoS | |
| classes."; | |
| } | |
| leaf unidirectional-available-bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Available bandwidth that is defined to be residual | |
| bandwidth minus the measured bandwidth used for the | |
| actual forwarding of non-RSVP-TE LSP packets. For a | |
| bundled link, available bandwidth is defined to be the | |
| sum of the component link available bandwidths."; | |
| } | |
| leaf unidirectional-utilized-bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Bandwidth utilization that represents the actual | |
| utilization of the link (i.e. as measured in the router). | |
| For a bundled link, bandwidth utilization is defined to | |
| be the sum of the component link bandwidth | |
| utilizations."; | |
| } | |
| } // performance-metric-attributes | |
| grouping performance-metric-normality-attributes { | |
| description | |
| "Link performance metric normality attributes."; | |
| reference | |
| "RFC7471: OSPF Traffic Engineering (TE) Metric Extensions."; | |
| leaf unidirectional-delay { | |
| type performance-metric-normality; | |
| description "Delay normality."; | |
| } | |
| leaf unidirectional-min-delay { | |
| type performance-metric-normality; | |
| description "Minimum delay or latency normality."; | |
| } | |
| leaf unidirectional-max-delay { | |
| type performance-metric-normality; | |
| description "Maximum delay or latency normality."; | |
| } | |
| leaf unidirectional-delay-variation { | |
| type performance-metric-normality; | |
| description "Delay variation normality."; | |
| } | |
| leaf unidirectional-packet-loss { | |
| type performance-metric-normality; | |
| description "Packet loss normality."; | |
| } | |
| leaf unidirectional-residual-bandwidth { | |
| type performance-metric-normality; | |
| description "Residual bandwidth normality."; | |
| } | |
| leaf unidirectional-available-bandwidth { | |
| type performance-metric-normality; | |
| description "Available bandwidth normality."; | |
| } | |
| leaf unidirectional-utilized-bandwidth { | |
| type performance-metric-normality; | |
| description "Bandwidth utilization normality."; | |
| } | |
| } // performance-metric-normality-attributes | |
| grouping performance-metric-throttle-container { | |
| description | |
| "A container controlling performance metric throttle."; | |
| container performance-metric-throttle { | |
| if-feature te-performance-metric; | |
| /*must "suppression-interval >= measure-interval" { | |
| error-message | |
| "suppression-interval cannot be less then | |
| measure-interval."; | |
| description | |
| "Constraint on suppression-interval and | |
| measure-interval."; | |
| }*/ | |
| description | |
| "Link performance information in real time."; | |
| reference | |
| "RFC7471: OSPF Traffic Engineering (TE) Metric Extensions."; | |
| leaf unidirectional-delay-offset { | |
| type uint32 { | |
| range 0..16777215; | |
| } | |
| description | |
| "Offset value to be added to the measured delay value."; | |
| } | |
| leaf measure-interval { | |
| type uint32; | |
| default 30; | |
| description | |
| "Interval in seconds to measure the extended metric | |
| values."; | |
| } | |
| leaf advertisement-interval { | |
| type uint32; | |
| description | |
| "Interval in seconds to advertise the extended metric | |
| values."; | |
| } | |
| leaf suppression-interval { | |
| type uint32 { | |
| range "1..max"; | |
| } | |
| default 120; | |
| description | |
| "Interval in seconds to suppress advertising the extended | |
| metric values."; | |
| } | |
| container threshold-out { | |
| uses performance-metric-attributes; | |
| description | |
| "If the measured parameter falls outside an upper bound | |
| for all but the min delay metric (or lower bound for | |
| min-delay metric only) and the advertised value is not | |
| already outside that bound, anomalous announcement will be | |
| triggered."; | |
| } | |
| container threshold-in { | |
| uses performance-metric-attributes; | |
| description | |
| "If the measured parameter falls inside an upper bound | |
| for all but the min delay metric (or lower bound for | |
| min-delay metric only) and the advertised value is not | |
| already inside that bound, normal (anomalous-flag cleared) | |
| announcement will be triggered."; | |
| } | |
| container threshold-accelerated-advertisement { | |
| description | |
| "When the difference between the last advertised value and | |
| current measured value exceed this threshold, anomalous | |
| announcement will be triggered."; | |
| uses performance-metric-attributes; | |
| } | |
| } | |
| } // performance-metric-throttle-container | |
| grouping te-link-augment { | |
| description | |
| "Augmentation for TE link."; | |
| container te { | |
| presence "TE support."; | |
| description | |
| "Indicates TE support."; | |
| container config { | |
| description | |
| "Configuration data."; | |
| uses te-link-config; | |
| } // config | |
| container state { | |
| config false; | |
| description | |
| "Operational state data."; | |
| uses te-link-config; | |
| uses te-link-state-derived; | |
| } // state | |
| } // te | |
| } // te-link-augment | |
| grouping te-link-config { | |
| description | |
| "TE link configuration grouping."; | |
| choice bundle-stack-level { | |
| description | |
| "The TE link can be partitioned into bundled | |
| links, or component links."; | |
| case bundle { | |
| container bundled-links { | |
| description | |
| "A set of bundled links."; | |
| reference | |
| "RFC4201: Link Bundling in MPLS Traffic Engineering | |
| (TE)."; | |
| list bundled-link { | |
| key "sequence"; | |
| description | |
| "Specify a bundled interface that is | |
| further partitioned."; | |
| leaf sequence { | |
| type uint32; | |
| description | |
| "Identify the sequence in the bundle."; | |
| } | |
| leaf src-tp-ref { | |
| type nt:tp-id; | |
| description | |
| "Reference to another TE termination point on the | |
| same souruce node."; | |
| } | |
| leaf des-tp-ref { | |
| type nt:tp-id; | |
| description | |
| "Reference to another TE termination point on the | |
| same destination node."; | |
| } | |
| } // list bundled-link | |
| } | |
| } | |
| case component { | |
| container component-links { | |
| description | |
| "A set of component links"; | |
| list component-link { | |
| key "sequence"; | |
| description | |
| "Specify a component interface that is | |
| sufficient to unambiguously identify the | |
| appropriate resources"; | |
| leaf sequence { | |
| type uint32; | |
| description | |
| "Identify the sequence in the bundle."; | |
| } | |
| leaf src-interface-ref { | |
| type string; | |
| description | |
| "Reference to component link interface on the | |
| source node."; | |
| } | |
| leaf des-interface-ref { | |
| type string; | |
| description | |
| "Reference to component link interface on the | |
| destinatioin node."; | |
| } | |
| } | |
| } | |
| } | |
| } // bundle-stack-level | |
| leaf-list te-link-template { | |
| if-feature template; | |
| type te-template-name; | |
| description | |
| "The reference to a TE link template."; | |
| } | |
| uses te-link-config-attributes; | |
| } // te-link-config | |
| grouping te-link-config-attributes { | |
| description | |
| "Link configuration attributes in a TE topology."; | |
| container te-link-attributes { | |
| description "Link attributes in a TE topology."; | |
| uses sch:schedules; | |
| leaf access-type { | |
| type te-link-access-type; | |
| description | |
| "Link access type, which can be point-to-point or | |
| multi-access."; | |
| } | |
| leaf is-abstract { | |
| type empty; | |
| description "Present if the link is abstract."; | |
| } | |
| leaf name { | |
| type string; | |
| description "Link Name."; | |
| } | |
| container underlay { | |
| if-feature te-topology-hierarchy; | |
| presence | |
| "Indicates the underlay exists for this link."; | |
| description "Attributes of the te-link underlay."; | |
| reference | |
| "RFC4206: Label Switched Paths (LSP) Hierarchy with | |
| Generalized Multi-Protocol Label Switching (GMPLS) | |
| Traffic Engineering (TE)"; | |
| uses te-link-underlay-attributes; | |
| } // underlay | |
| leaf admin-status { | |
| type te-admin-status; | |
| description | |
| "The administrative state of the link."; | |
| } | |
| uses performance-metric-throttle-container; | |
| uses te-link-info-attributes; | |
| } // te-link-attributes | |
| } // te-link-config-attributes | |
| grouping te-link-info-attributes { | |
| description | |
| "Advertised TE information attributes."; | |
| leaf link-index { | |
| type uint64; | |
| description | |
| "The link identifier. If OSPF is used, this represents an | |
| ospfLsdbID. If IS-IS is used, this represents an isisLSPID. | |
| If a locally configured link is used, this object represents | |
| a unique value, which is locally defined in a router."; | |
| } | |
| leaf administrative-group { | |
| type te-types:admin-groups; | |
| description | |
| "Administrative group or color of the link. | |
| This attribute covers both administrative group (defined in | |
| RFC3630, RFC5329, and RFC5305), and extended administrative | |
| group (defined in RFC7308)."; | |
| } | |
| leaf max-link-bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Maximum bandwidth that can be seen on this link in this | |
| direction. Units in bytes per second."; | |
| reference | |
| "RFC3630: Traffic Engineering (TE) Extensions to OSPF | |
| Version 2. | |
| RFC5305: IS-IS Extensions for Traffic Engineering."; | |
| } | |
| leaf max-resv-link-bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Maximum amount of bandwidth that can be reserved in this | |
| direction in this link. Units in bytes per second."; | |
| reference | |
| "RFC3630: Traffic Engineering (TE) Extensions to OSPF | |
| Version 2. | |
| RFC5305: IS-IS Extensions for Traffic Engineering."; | |
| } | |
| list unreserved-bandwidth { | |
| key "priority"; | |
| max-elements "8"; | |
| description | |
| "Unreserved bandwidth for 0-7 priority levels. Units in | |
| bytes per second."; | |
| reference | |
| "RFC3630: Traffic Engineering (TE) Extensions to OSPF | |
| Version 2. | |
| RFC5305: IS-IS Extensions for Traffic Engineering."; | |
| leaf priority { | |
| type uint8 { | |
| range "0..7"; | |
| } | |
| description "Priority."; | |
| } | |
| leaf bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Unreserved bandwidth for this level."; | |
| } | |
| } | |
| leaf te-default-metric { | |
| type uint32; | |
| description | |
| "Traffic Engineering Metric."; | |
| } | |
| container performance-metric { | |
| if-feature te-performance-metric; | |
| description | |
| "Link performance information in real time."; | |
| reference | |
| "RFC7471: OSPF Traffic Engineering (TE) Metric Extensions."; | |
| container measurement { | |
| description | |
| "Measured performance metric values. Static configuration | |
| and manual overrides of these measurements are also | |
| allowed."; | |
| uses performance-metric-attributes; | |
| } | |
| container normality | |
| { | |
| description | |
| "Performance metric normality values."; | |
| uses performance-metric-normality-attributes; | |
| } | |
| } | |
| leaf link-protection-type { | |
| type enumeration { | |
| enum "unprotected" { | |
| description "Unprotected."; | |
| } | |
| enum "extra-traffic" { | |
| description "Extra traffic."; | |
| } | |
| enum "shared" { | |
| description "Shared."; | |
| } | |
| enum "1-for-1" { | |
| description "One for one protection."; | |
| } | |
| enum "1-plus-1" { | |
| description "One plus one protection."; | |
| } | |
| enum "enhanced" { | |
| description "Enhanced protection."; | |
| } | |
| } | |
| description | |
| "Link Protection Type desired for this link."; | |
| reference | |
| "RFC4202: Routing Extensions in Support of | |
| Generalized Multi-Protocol Label Switching (GMPLS)."; | |
| } | |
| list interface-switching-capability { | |
| key "switching-capability"; | |
| description | |
| "List of Interface Switching Capabilities Descriptors (ISCD) | |
| for this link."; | |
| reference | |
| "RFC3471: Generalized Multi-Protocol Label Switching (GMPLS) | |
| Signaling Functional Description. | |
| RFC4203: OSPF Extensions in Support of Generalized | |
| Multi-Protocol Label Switching (GMPLS)."; | |
| leaf switching-capability { | |
| type string; | |
| description | |
| "Switching Capability for this interface."; | |
| } | |
| leaf encoding { | |
| type string; | |
| description | |
| "Encoding supported by this interface."; | |
| } | |
| list max-lsp-bandwidth { | |
| key "priority"; | |
| max-elements "8"; | |
| description | |
| "Maximum LSP Bandwidth at priorities 0-7."; | |
| leaf priority { | |
| type uint8 { | |
| range "0..7"; | |
| } | |
| description "Priority."; | |
| } | |
| leaf bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Max LSP Bandwidth for this level"; | |
| } | |
| } | |
| container time-division-multiplex-capable { | |
| when "../switching-capability = 'TDM'" { | |
| description "Valid only for TDM"; | |
| } | |
| description | |
| "Interface has time-division multiplex capabilities."; | |
| leaf minimum-lsp-bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Minimum LSP Bandwidth. Units in bytes per second."; | |
| } | |
| leaf indication { | |
| type enumeration { | |
| enum "standard" { | |
| description | |
| "Indicates support of standard SONET/SDH."; | |
| } | |
| enum "arbitrary" { | |
| description | |
| "Indicates support of arbitrary SONET/SDH."; | |
| } | |
| } | |
| description | |
| "Indication whether the interface supports Standard or | |
| Arbitrary SONET/SDH"; | |
| } | |
| } | |
| list interface-adjustment-capability { | |
| key "upper-sc"; | |
| description | |
| "List of Interface Adjustment Capability Descriptors (IACD) | |
| for this link."; | |
| reference | |
| "RFC6001: Generalized MPLS (GMPLS) Protocol Extensions | |
| for Multi-Layer and Multi-Region Networks (MLN/MRN)."; | |
| leaf upper-sc { | |
| type string; | |
| description | |
| "Switching Capability for this interface."; | |
| } | |
| leaf upper-encoding { | |
| type string; | |
| description | |
| "Encoding supported by this interface."; | |
| } | |
| list max-lsp-bandwidth { | |
| key "priority"; | |
| max-elements "8"; | |
| description | |
| "Maximum LSP Bandwidth at priorities 0-7."; | |
| leaf priority { | |
| type uint8 { | |
| range "0..7"; | |
| } | |
| description "Priority."; | |
| } | |
| leaf bandwidth { | |
| type decimal64 { | |
| /*fraction-digits 2;*/ | |
| } | |
| description | |
| "Max LSP Bandwidth for this level."; | |
| } | |
| } | |
| } // interface-adjustment-capability | |
| } // interface-switching-capability | |
| container te-srlgs { | |
| description | |
| "A list of SLRGs."; | |
| leaf-list values { | |
| type te-types:srlg; | |
| description "SRLG value."; | |
| reference | |
| "RFC4202: Routing Extensions in Support of | |
| Generalized Multi-Protocol Label Switching (GMPLS)."; | |
| } | |
| } | |
| } // te-link-info-attributes | |
| grouping te-link-state-derived { | |
| description | |
| "Link state attributes in a TE topology."; | |
| leaf oper-status { | |
| type te-oper-status; | |
| description | |
| "The current operational state of the link."; | |
| } | |
| uses information-source-attributes; | |
| list alt-information-sources { | |
| key "information-source"; | |
| description | |
| "A list of information sources learned but not used."; | |
| uses information-source-attributes; | |
| uses te-link-info-attributes; | |
| } | |
| container recovery { | |
| description | |
| "Status of the recovery process."; | |
| leaf restoration-status { | |
| type te-recovery-status; | |
| description | |
| "Restoration status."; | |
| } | |
| leaf protection-status { | |
| type te-recovery-status; | |
| description | |
| "Protection status."; | |
| } | |
| } | |
| container underlay { | |
| if-feature te-topology-hierarchy; | |
| description "State attributes for te-link underlay."; | |
| uses te-link-state-underlay-attributes; | |
| } | |
| } // te-link-state-derived | |
| grouping te-link-state-underlay-attributes { | |
| description "State attributes for te-link underlay."; | |
| leaf dynamic { | |
| type boolean; | |
| description | |
| "true if the underlay is dynamically created."; | |
| } | |
| leaf committed { | |
| type boolean; | |
| description | |
| "true if the underlay is committed."; | |
| } | |
| } // te-link-state-underlay-attributes | |
| grouping te-link-underlay-attributes { | |
| description "Attributes for te-link underlay."; | |
| reference | |
| "RFC4206: Label Switched Paths (LSP) Hierarchy with | |
| Generalized Multi-Protocol Label Switching (GMPLS) | |
| Traffic Engineering (TE)"; | |
| container underlay-primary-path { | |
| description | |
| "The service path on the underlay topology that | |
| supports this link."; | |
| uses te-topology-ref; | |
| list path-element { | |
| key "path-element-id"; | |
| description | |
| "A list of path elements describing the service path."; | |
| leaf path-element-id { | |
| type uint32; | |
| description "To identify the element in a path."; | |
| } | |
| uses te-path-element; | |
| } | |
| } // underlay-primary-path | |
| list underlay-backup-path { | |
| key "index"; | |
| description | |
| "A list of backup service paths on the underlay topology that | |
| protect the underlay primary path. If the primary path is | |
| not protected, the list contains zero elements. If the | |
| primary path is protected, the list contains one or more | |
| elements."; | |
| leaf index { | |
| type uint32; | |
| description | |
| "A sequence number to identify a backup path."; | |
| } | |
| uses te-topology-ref; | |
| list path-element { | |
| key "path-element-id"; | |
| description | |
| "A list of path elements describing the backup service | |
| path"; | |
| leaf path-element-id { | |
| type uint32; | |
| description "To identify the element in a path."; | |
| } | |
| uses te-path-element; | |
| } | |
| } // underlay-backup-path | |
| leaf underlay-protection-type { | |
| type uint16; | |
| description | |
| "Underlay protection type desired for this link"; | |
| } | |
| container underlay-trail-src { | |
| uses nt:tp-ref; | |
| description | |
| "Source TE link of the underlay trail."; | |
| } | |
| container underlay-trail-des { | |
| uses nt:tp-ref; | |
| description | |
| "Destination TE link of the underlay trail."; | |
| } | |
| } // te-link-underlay-attributes | |
| grouping te-node-augment { | |
| description | |
| "Augmentation for TE node."; | |
| container te { | |
| presence "TE support."; | |
| description | |
| "Indicates TE support."; | |
| leaf te-node-id { | |
| type te-node-id; | |
| mandatory true; | |
| description | |
| "The identifier of a node in the TE topology. | |
| A node is specific to a topology to which it belongs."; | |
| } | |
| container config { | |
| description | |
| "Configuration data."; | |
| uses te-node-config; | |
| } // config | |
| container state { | |
| config false; | |
| description | |
| "Operational state data."; | |
| uses te-node-config; | |
| uses te-node-state-derived; | |
| } // state | |
| list tunnel-termination-point { | |
| key "tunnel-tp-id"; | |
| description | |
| "A termination point can terminate a tunnel."; | |
| leaf tunnel-tp-id { | |
| type binary; | |
| description | |
| "Tunnel termination point identifier."; | |
| } | |
| container config { | |
| description | |
| "Configuration data."; | |
| uses te-node-tunnel-termination-capability; | |
| } | |
| container state { | |
| config false; | |
| description | |
| "Operational state data."; | |
| uses te-node-tunnel-termination-capability; | |
| leaf switching-capability { | |
| type string; | |
| mandatory true; | |
| description | |
| "Switching Capability."; | |
| } | |
| leaf encoding { | |
| type string; | |
| mandatory true; | |
| description | |
| "Encoding type."; | |
| } | |
| } // state | |
| } // tunnel-termination-point | |
| } // te | |
| } // te-node-augment | |
| grouping te-node-config { | |
| description "TE node configuration grouping."; | |
| leaf-list te-node-template { | |
| if-feature template; | |
| type te-template-name; | |
| description | |
| "The reference to a TE node template."; | |
| } | |
| uses te-node-config-attributes; | |
| } // te-node-config | |
| grouping te-node-config-attributes { | |
| description "Configuration node attributes in a TE topology."; | |
| container te-node-attributes { | |
| description "Containing node attributes in a TE topology."; | |
| uses sch:schedules; | |
| leaf admin-status { | |
| type te-admin-status; | |
| description | |
| "The administrative state of the link."; | |
| } | |
| uses te-node-connectivity-matrix; | |
| uses te-node-info-attributes; | |
| } // te-node-attributes | |
| } // te-node-config-attributes | |
| grouping te-node-config-attributes-notification { | |
| description | |
| "Configuration node attributes for template in a TE topology."; | |
| container te-node-attributes { | |
| description "Containing node attributes in a TE topology."; | |
| uses sch:schedules; | |
| leaf admin-status { | |
| type te-admin-status; | |
| description | |
| "The administrative state of the link."; | |
| } | |
| uses te-node-connectivity-matrix-abs; | |
| uses te-node-info-attributes; | |
| } // te-node-attributes | |
| } // te-node-config-attributes-notification | |
| grouping te-node-config-attributes-template { | |
| description | |
| "Configuration node attributes for template in a TE topology."; | |
| container te-node-attributes { | |
| description "Containing node attributes in a TE topology."; | |
| uses sch:schedules; | |
| leaf admin-status { | |
| type te-admin-status; | |
| description | |
| "The administrative state of the link."; | |
| } | |
| uses te-node-info-attributes; | |
| } // te-node-attributes | |
| } // te-node-config-attributes-template | |
| grouping te-node-connectivity-matrix { | |
| description "Connectivity matrix on a TE node."; | |
| list connectivity-matrix { | |
| key "id"; | |
| description | |
| "Represents node's switching limitations, i.e. limitations | |
| in interconnecting network TE links across the node."; | |
| reference | |
| "RFC7579: General Network Element Constraint Encoding | |
| for GMPLS-Controlled Networks."; | |
| leaf id { | |
| type uint32; | |
| description "Identifies the connectivity-matrix entry."; | |
| } | |
| container from { | |
| leaf tp-ref { | |
| type nt:tp-id; | |
| description | |
| "Relative reference to source termination point."; | |
| } | |
| description | |
| "Reference to source NTP."; | |
| } | |
| container to { | |
| leaf tp-ref { | |
| type nt:tp-id; | |
| description | |
| "Relative reference to destination termination point."; | |
| } | |
| description | |
| "Reference to destination NTP."; | |
| } | |
| leaf is-allowed { | |
| type boolean; | |
| description | |
| "true - switching is allowed, | |
| false - switching is disallowed."; | |
| } | |
| } | |
| } // te-node-connectivity-matrix | |
| grouping te-node-connectivity-matrix-abs { | |
| description | |
| "Connectivity matrix on a TE node, using absolute | |
| paths to reference termination points."; | |
| list connectivity-matrix { | |
| key "id"; | |
| description | |
| "Represents node's switching limitations, i.e. limitations | |
| in interconnecting network TE links across the node."; | |
| reference | |
| "RFC7579: General Network Element Constraint Encoding | |
| for GMPLS-Controlled Networks."; | |
| leaf id { | |
| type uint32; | |
| description "Identifies the connectivity-matrix entry."; | |
| } | |
| container from { | |
| uses nt:tp-ref; | |
| description | |
| "Reference to source NTP."; | |
| } | |
| container to { | |
| uses nt:tp-ref; | |
| description | |
| "Reference to destination NTP."; | |
| } | |
| leaf is-allowed { | |
| type boolean; | |
| description | |
| "true - switching is allowed, | |
| false - switching is disallowed."; | |
| } | |
| } | |
| } // te-node-connectivity-matrix-abs | |
| grouping te-node-info-attributes { | |
| description | |
| "Advertised TE information attributes."; | |
| leaf domain-id { | |
| type uint32; | |
| description | |
| "Identifies the domain that this node belongs. | |
| This attribute is used to support inter-domain links."; | |
| reference | |
| "RFC5152: A Per-Domain Path Computation Method for | |
| Establishing Inter-Domain Traffic Engineering (TE) | |
| Label Switched Paths (LSPs). | |
| RFC5392: OSPF Extensions in Support of Inter-Autonomous | |
| System (AS) MPLS and GMPLS Traffic Engineering. | |
| RFC5316: ISIS Extensions in Support of Inter-Autonomous | |
| System (AS) MPLS and GMPLS Traffic Engineering."; | |
| } | |
| leaf is-abstract { | |
| type empty; | |
| description | |
| "Present if the node is abstract, not present if the node | |
| is actual."; | |
| } | |
| leaf name { | |
| type inet:domain-name; | |
| description "Node name."; | |
| } | |
| leaf-list signaling-address { | |
| type inet:ip-address; | |
| description "Node signaling address."; | |
| } | |
| container underlay-topology { | |
| if-feature te-topology-hierarchy; | |
| description | |
| "When an abstract node encapsulates a topology, | |
| the attributes in this container point to said topology."; | |
| uses te-topology-ref; | |
| } | |
| } // te-node-info-attributes | |
| grouping te-node-state-derived { | |
| description "Node state attributes in a TE topology."; | |
| leaf oper-status { | |
| type te-oper-status; | |
| description | |
| "The current operational state of the node."; | |
| } | |
| leaf is-multi-access-dr { | |
| type empty; | |
| description | |
| "The presence of this attribute indicates that this TE node | |
| is a pseudonode elected as a designated router."; | |
| reference | |
| "RFC3630: Traffic Engineering (TE) Extensions to OSPF | |
| Version 2. | |
| RFC1195: Use of OSI IS-IS for Routing in TCP/IP and Dual | |
| Environments."; | |
| } | |
| uses information-source-attributes; | |
| list alt-information-sources { | |
| key "information-source"; | |
| description | |
| "A list of information sources learned but not used."; | |
| uses information-source-attributes; | |
| uses te-node-connectivity-matrix; | |
| uses te-node-info-attributes; | |
| } | |
| } // te-node-state-derived | |
| grouping te-node-state-derived-notification { | |
| description "Node state attributes in a TE topology."; | |
| leaf oper-status { | |
| type te-oper-status; | |
| description | |
| "The current operational state of the node."; | |
| } | |
| leaf is-multi-access-dr { | |
| type empty; | |
| description | |
| "The presence of this attribute indicates that this TE node | |
| is a pseudonode elected as a designated router."; | |
| reference | |
| "RFC3630: Traffic Engineering (TE) Extensions to OSPF | |
| Version 2. | |
| RFC1195: Use of OSI IS-IS for Routing in TCP/IP and Dual | |
| Environments."; | |
| } | |
| uses information-source-attributes; | |
| list alt-information-sources { | |
| key "information-source"; | |
| description | |
| "A list of information sources learned but not used."; | |
| uses information-source-attributes; | |
| uses te-node-connectivity-matrix-abs; | |
| uses te-node-info-attributes; | |
| } | |
| } // te-node-state-derived-notification | |
| grouping te-node-tunnel-termination-capability { | |
| description | |
| "Termination capability of a tunnel termination point on a | |
| TE node."; | |
| list termination-capability { | |
| key "link-tp"; | |
| description | |
| "The termination capabilities between | |
| tunnel-termination-point and link termination-point. | |
| The capability information can be used to compute | |
| the tunnel path."; | |
| leaf link-tp { | |
| type nt:tp-id; | |
| description | |
| "Link termination point."; | |
| } | |
| } // termination-capability | |
| } // te-node-tunnel-termination-capability | |
| grouping te-path-element { | |
| description | |
| "A group of attributes defining an element in a TE path | |
| such as TE node, TE link, TE atomic resource or label."; | |
| uses te-types:explicit-route-subobject; | |
| } // te-path-element | |
| grouping te-termination-point-augment { | |
| description | |
| "Augmentation for TE termination point."; | |
| container te { | |
| presence "TE support."; | |
| description | |
| "Indicates TE support."; | |
| leaf te-tp-id { | |
| type te-tp-id; | |
| mandatory true; | |
| description | |
| "An identifier to uniquely identify a TE termination | |
| point."; | |
| } | |
| container config { | |
| description | |
| "Configuration data."; | |
| uses te-termination-point-config; | |
| } // config | |
| container state { | |
| config false; | |
| description | |
| "Operational state data."; | |
| uses te-termination-point-config; | |
| } // state | |
| } // te | |
| } // te-termination-point-augment | |
| grouping te-termination-point-config { | |
| description | |
| "TE termination point configuration grouping."; | |
| uses sch:schedules; | |
| } // te-termination-point-config | |
| grouping te-topologies-augment { | |
| description | |
| "Augmentation for TE topologies."; | |
| container te { | |
| presence "TE support."; | |
| description | |
| "Indicates TE support."; | |
| container templates { | |
| description | |
| "Configuration parameters for templates used for TE | |
| topology."; | |
| list node-template { | |
| if-feature template; | |
| key "name"; | |
| leaf name { | |
| type te-template-name; | |
| description | |
| "The name to identify a TE node template."; | |
| } | |
| description | |
| "The list of TE node templates used to define sharable | |
| and reusable TE node attributes."; | |
| uses template-attributes; | |
| uses te-node-config-attributes-template; | |
| } // node-template | |
| list link-template { | |
| if-feature template; | |
| key "name"; | |
| leaf name { | |
| type te-template-name; | |
| description | |
| "The name to identify a TE link template."; | |
| } | |
| description | |
| "The list of TE link templates used to define sharable | |
| and reusable TE link attributes."; | |
| uses template-attributes; | |
| uses te-link-config-attributes; | |
| } // link-template | |
| } // templates | |
| } // te | |
| } // te-topologies-augment | |
| grouping te-topology-augment { | |
| description | |
| "Augmentation for TE topology."; | |
| container te { | |
| presence "TE support."; | |
| description | |
| "Indicates TE support."; | |
| leaf provider-id { | |
| type te-global-id; | |
| mandatory true; | |
| description | |
| "An identifier to uniquely identify a provider."; | |
| } | |
| leaf client-id { | |
| type te-global-id; | |
| mandatory true; | |
| description | |
| "An identifier to uniquely identify a client."; | |
| } | |
| leaf te-topology-id { | |
| type te-topology-id; | |
| mandatory true; | |
| description | |
| "It is presumed that a datastore will contain many | |
| topologies. To distinguish between topologies it is | |
| vital to have UNIQUE topology identifiers."; | |
| } | |
| container config { | |
| description | |
| "Configuration data."; | |
| uses te-topology-config; | |
| } // config | |
| container state { | |
| config false; | |
| description | |
| "Operational state data."; | |
| uses te-topology-config; | |
| } // state | |
| } // te | |
| } // te-topology-augment | |
| grouping te-topology-config { | |
| description | |
| "TE topology configuration grouping."; | |
| uses sch:schedules; | |
| leaf preference { | |
| type uint8 { | |
| range "1..255"; | |
| } | |
| description | |
| "Specifies a preference for this topology. A lower number | |
| indicates a higher preference."; | |
| } | |
| } // te-topology-config | |
| grouping te-topology-ref { | |
| description | |
| "References a TE topology."; | |
| leaf provider-id-ref { | |
| type te-global-id; | |
| description | |
| "A reference to a provider-id."; | |
| } | |
| leaf client-id-ref { | |
| type te-global-id; | |
| description | |
| "A reference to a client-id."; | |
| } | |
| leaf te-topology-id-ref { | |
| type tet:te-topology-id; | |
| description | |
| "A reference to a te-topology-id."; | |
| } | |
| leaf network-id-ref { | |
| type nw:network-id; | |
| description | |
| "A reference to a network-id in base ietf-network module."; | |
| } | |
| } // te-topology-ref | |
| grouping te-topology-type { | |
| description | |
| "Identifies the TE topology type."; | |
| container te-topology { | |
| presence "Indicates TE topology."; | |
| description | |
| "Its presence identifies the TE topology type."; | |
| } | |
| } // te-topology-type | |
| grouping template-attributes { | |
| description | |
| "Common attributes for all templates."; | |
| leaf priority { | |
| type uint16; | |
| description | |
| "The preference value to resolve conflicts between different | |
| templates. When two or more templates specify values for | |
| one configuration attribute, the value from the template | |
| with the highest priority is used."; | |
| } | |
| leaf reference-change-policy { | |
| type enumeration { | |
| enum no-action { | |
| description | |
| "When an attribute changes in this template, the | |
| configuration node referring to this template does | |
| not take any action."; | |
| } | |
| enum not-allowed { | |
| description | |
| "When any configuration object has a reference to this | |
| template, changing this template is not allowed."; | |
| } | |
| enum cascade { | |
| description | |
| "When an attribute changes in this template, the | |
| configuration object referring to this template applies | |
| the new attribute value to the corresponding | |
| configuration."; | |
| } | |
| } | |
| description | |
| "This attribute specifies the action taken to a configuration | |
| node that has a reference to this template."; | |
| } | |
| } // template-attributes | |
| /* | |
| * Configuration data nodes | |
| */ | |
| augment "/nw:networks/nw:network/nw:network-types" { | |
| description | |
| "Introduce new network type for TE topology."; | |
| uses te-topology-type; | |
| } | |
| augment "/nw:networks" { | |
| description | |
| "Augmentation parameters for TE topologies."; | |
| uses te-topologies-augment; | |
| } | |
| augment "/nw:networks/nw:network" { | |
| when "nw:network-types/te-topology" { | |
| description | |
| "Augmentation parameters apply only for networks with | |
| TE topology type."; | |
| } | |
| description | |
| "Configuration parameters for TE topology."; | |
| uses te-topology-augment; | |
| } | |
| augment "/nw:networks/nw:network/nw:node" { | |
| when "../nw:network-types/te-topology" { | |
| description | |
| "Augmentation parameters apply only for networks with | |
| TE topology type."; | |
| } | |
| description | |
| "Configuration parameters for TE at node level."; | |
| uses te-node-augment; | |
| } | |
| augment "/nw:networks/nw:network/nt:link" { | |
| when "../nw:network-types/te-topology" { | |
| description | |
| "Augmentation parameters apply only for networks with | |
| TE topology type."; | |
| } | |
| description | |
| "Configuration parameters for TE at link level"; | |
| uses te-link-augment; | |
| } | |
| augment "/nw:networks/nw:network/nw:node/" | |
| + "nt:termination-point" { | |
| when "../../nw:network-types/te-topology" { | |
| description | |
| "Augmentation parameters apply only for networks with | |
| TE topology type."; | |
| } | |
| description | |
| "Configuration parameters for TE at termination point level"; | |
| uses te-termination-point-augment; | |
| } | |
| /* | |
| * Operational state data nodes | |
| */ | |
| /* | |
| * Notifications | |
| */ | |
| notification te-node-event { | |
| description "Notification event for TE node."; | |
| leaf event-type { | |
| type te-topology-event-type; | |
| description "Event type."; | |
| } | |
| uses nw:node-ref; | |
| uses te-topology-type; | |
| uses tet:te-node-config-attributes-notification; | |
| uses tet:te-node-state-derived-notification; | |
| } | |
| notification te-link-event { | |
| description "Notification event for TE link."; | |
| leaf event-type { | |
| type te-topology-event-type; | |
| description "Event type"; | |
| } | |
| uses nt:link-ref; | |
| uses te-topology-type; | |
| uses tet:te-link-config-attributes; | |
| uses tet:te-link-state-derived; | |
| } | |
| augment "/te-link-event/te-link-attributes/underlay" { | |
| description "Add state attributes to te-link underlay."; | |
| uses te-link-state-underlay-attributes; | |
| } | |
| } |