Rich Lane | a06d0c3 | 2013-03-25 08:52:03 -0700 | [diff] [blame] | 1 | /* Copyright (c) 2008 The Board of Trustees of The Leland Stanford |
| 2 | * Junior University |
| 3 | * Copyright (c) 2011, 2012 Open Networking Foundation |
| 4 | * |
| 5 | * We are making the OpenFlow specification and associated documentation |
| 6 | * (Software) available for public use and benefit with the expectation |
| 7 | * that others will use, modify and enhance the Software and contribute |
| 8 | * those enhancements back to the community. However, since we would |
| 9 | * like to make the Software available for broadest use, with as few |
| 10 | * restrictions as possible permission is hereby granted, free of |
| 11 | * charge, to any person obtaining a copy of this Software to deal in |
| 12 | * the Software under the copyrights without restriction, including |
| 13 | * without limitation the rights to use, copy, modify, merge, publish, |
| 14 | * distribute, sublicense, and/or sell copies of the Software, and to |
| 15 | * permit persons to whom the Software is furnished to do so, subject to |
| 16 | * the following conditions: |
| 17 | * |
| 18 | * The above copyright notice and this permission notice shall be |
| 19 | * included in all copies or substantial portions of the Software. |
| 20 | * |
| 21 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 22 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| 23 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 24 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| 25 | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| 26 | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| 27 | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| 28 | * SOFTWARE. |
| 29 | * |
| 30 | * The name and trademarks of copyright holder(s) may NOT be used in |
| 31 | * advertising or publicity pertaining to the Software or any |
| 32 | * derivatives without specific, written prior permission. |
| 33 | */ |
| 34 | |
| 35 | /* OpenFlow: protocol between controller and datapath. */ |
| 36 | |
| 37 | #ifndef OPENFLOW_OPENFLOW_H |
| 38 | #define OPENFLOW_OPENFLOW_H 1 |
| 39 | |
| 40 | #ifdef __KERNEL__ |
| 41 | #include <linux/types.h> |
| 42 | #else |
| 43 | #include <stdint.h> |
| 44 | #endif |
| 45 | |
| 46 | #ifdef SWIG |
| 47 | #define OFP_ASSERT(EXPR) /* SWIG can't handle OFP_ASSERT. */ |
| 48 | #elif !defined(__cplusplus) |
| 49 | /* Build-time assertion for use in a declaration context. */ |
| 50 | #define OFP_ASSERT(EXPR) \ |
| 51 | extern int (*build_assert(void))[ sizeof(struct { \ |
| 52 | unsigned int build_assert_failed : (EXPR) ? 1 : -1; })] |
| 53 | #else /* __cplusplus */ |
| 54 | #define OFP_ASSERT(_EXPR) typedef int build_assert_failed[(_EXPR) ? 1 : -1] |
| 55 | #endif /* __cplusplus */ |
| 56 | |
| 57 | #ifndef SWIG |
| 58 | #define OFP_PACKED __attribute__((packed)) |
| 59 | #else |
| 60 | #define OFP_PACKED /* SWIG doesn't understand __attribute. */ |
| 61 | #endif |
| 62 | |
| 63 | /* Version number: |
| 64 | * Non-experimental versions released: 0x01 = 1.0 ; 0x02 = 1.1 ; 0x03 = 1.2 |
| 65 | * 0x04 = 1.3 |
| 66 | * Experimental versions released: 0x81 -- 0x99 |
| 67 | */ |
| 68 | /* The most significant bit being set in the version field indicates an |
| 69 | * experimental OpenFlow version. |
| 70 | */ |
| 71 | #define OFP_VERSION 0x04 |
| 72 | |
| 73 | #define OFP_MAX_TABLE_NAME_LEN 32 |
| 74 | #define OFP_MAX_PORT_NAME_LEN 16 |
| 75 | |
| 76 | #define OFP_TCP_PORT 6633 |
| 77 | #define OFP_SSL_PORT 6633 |
| 78 | |
| 79 | #define OFP_ETH_ALEN 6 /* Bytes in an Ethernet address. */ |
| 80 | |
| 81 | /* Port numbering. Ports are numbered starting from 1. */ |
| 82 | enum ofp_port_no { |
| 83 | /* Maximum number of physical and logical switch ports. */ |
| 84 | OFPP_MAX = 0xffffff00, |
| 85 | |
| 86 | /* Reserved OpenFlow Port (fake output "ports"). */ |
| 87 | OFPP_IN_PORT = 0xfffffff8, /* Send the packet out the input port. This |
| 88 | reserved port must be explicitly used |
| 89 | in order to send back out of the input |
| 90 | port. */ |
| 91 | OFPP_TABLE = 0xfffffff9, /* Submit the packet to the first flow table |
| 92 | NB: This destination port can only be |
| 93 | used in packet-out messages. */ |
| 94 | OFPP_NORMAL = 0xfffffffa, /* Process with normal L2/L3 switching. */ |
| 95 | OFPP_FLOOD = 0xfffffffb, /* All physical ports in VLAN, except input |
| 96 | port and those blocked or link down. */ |
| 97 | OFPP_ALL = 0xfffffffc, /* All physical ports except input port. */ |
| 98 | OFPP_CONTROLLER = 0xfffffffd, /* Send to controller. */ |
| 99 | OFPP_LOCAL = 0xfffffffe, /* Local openflow "port". */ |
| 100 | OFPP_ANY = 0xffffffff /* Wildcard port used only for flow mod |
| 101 | (delete) and flow stats requests. Selects |
| 102 | all flows regardless of output port |
| 103 | (including flows with no output port). */ |
| 104 | }; |
| 105 | |
| 106 | enum ofp_type { |
| 107 | /* Immutable messages. */ |
| 108 | OFPT_HELLO = 0, /* Symmetric message */ |
| 109 | OFPT_ERROR = 1, /* Symmetric message */ |
| 110 | OFPT_ECHO_REQUEST = 2, /* Symmetric message */ |
| 111 | OFPT_ECHO_REPLY = 3, /* Symmetric message */ |
| 112 | OFPT_EXPERIMENTER = 4, /* Symmetric message */ |
| 113 | |
| 114 | /* Switch configuration messages. */ |
| 115 | OFPT_FEATURES_REQUEST = 5, /* Controller/switch message */ |
| 116 | OFPT_FEATURES_REPLY = 6, /* Controller/switch message */ |
| 117 | OFPT_GET_CONFIG_REQUEST = 7, /* Controller/switch message */ |
| 118 | OFPT_GET_CONFIG_REPLY = 8, /* Controller/switch message */ |
| 119 | OFPT_SET_CONFIG = 9, /* Controller/switch message */ |
| 120 | |
| 121 | /* Asynchronous messages. */ |
| 122 | OFPT_PACKET_IN = 10, /* Async message */ |
| 123 | OFPT_FLOW_REMOVED = 11, /* Async message */ |
| 124 | OFPT_PORT_STATUS = 12, /* Async message */ |
| 125 | |
| 126 | /* Controller command messages. */ |
| 127 | OFPT_PACKET_OUT = 13, /* Controller/switch message */ |
| 128 | OFPT_FLOW_MOD = 14, /* Controller/switch message */ |
| 129 | OFPT_GROUP_MOD = 15, /* Controller/switch message */ |
| 130 | OFPT_PORT_MOD = 16, /* Controller/switch message */ |
| 131 | OFPT_TABLE_MOD = 17, /* Controller/switch message */ |
| 132 | |
| 133 | /* Multipart messages. */ |
| 134 | OFPT_MULTIPART_REQUEST = 18, /* Controller/switch message */ |
| 135 | OFPT_MULTIPART_REPLY = 19, /* Controller/switch message */ |
| 136 | |
| 137 | /* Barrier messages. */ |
| 138 | OFPT_BARRIER_REQUEST = 20, /* Controller/switch message */ |
| 139 | OFPT_BARRIER_REPLY = 21, /* Controller/switch message */ |
| 140 | |
| 141 | /* Queue Configuration messages. */ |
| 142 | OFPT_QUEUE_GET_CONFIG_REQUEST = 22, /* Controller/switch message */ |
| 143 | OFPT_QUEUE_GET_CONFIG_REPLY = 23, /* Controller/switch message */ |
| 144 | |
| 145 | /* Controller role change request messages. */ |
| 146 | OFPT_ROLE_REQUEST = 24, /* Controller/switch message */ |
| 147 | OFPT_ROLE_REPLY = 25, /* Controller/switch message */ |
| 148 | |
| 149 | /* Asynchronous message configuration. */ |
| 150 | OFPT_GET_ASYNC_REQUEST = 26, /* Controller/switch message */ |
| 151 | OFPT_GET_ASYNC_REPLY = 27, /* Controller/switch message */ |
| 152 | OFPT_SET_ASYNC = 28, /* Controller/switch message */ |
| 153 | |
| 154 | /* Meters and rate limiters configuration messages. */ |
| 155 | OFPT_METER_MOD = 29, /* Controller/switch message */ |
| 156 | }; |
| 157 | |
| 158 | /* Header on all OpenFlow packets. */ |
| 159 | struct ofp_header { |
| 160 | uint8_t version; /* OFP_VERSION. */ |
| 161 | uint8_t type; /* One of the OFPT_ constants. */ |
| 162 | uint16_t length; /* Length including this ofp_header. */ |
| 163 | uint32_t xid; /* Transaction id associated with this packet. |
| 164 | Replies use the same id as was in the request |
| 165 | to facilitate pairing. */ |
| 166 | }; |
| 167 | OFP_ASSERT(sizeof(struct ofp_header) == 8); |
| 168 | |
| 169 | /* Hello elements types. |
| 170 | */ |
| 171 | enum ofp_hello_elem_type { |
| 172 | OFPHET_VERSIONBITMAP = 1, /* Bitmap of version supported. */ |
| 173 | }; |
| 174 | |
| 175 | /* Common header for all Hello Elements */ |
| 176 | struct ofp_hello_elem_header { |
| 177 | uint16_t type; /* One of OFPHET_*. */ |
| 178 | uint16_t length; /* Length in bytes of this element. */ |
| 179 | }; |
| 180 | OFP_ASSERT(sizeof(struct ofp_hello_elem_header) == 4); |
| 181 | |
| 182 | /* Version bitmap Hello Element */ |
| 183 | struct ofp_hello_elem_versionbitmap { |
| 184 | uint16_t type; /* OFPHET_VERSIONBITMAP. */ |
| 185 | uint16_t length; /* Length in bytes of this element. */ |
| 186 | /* Followed by: |
| 187 | * - Exactly (length - 4) bytes containing the bitmaps, then |
| 188 | * - Exactly (length + 7)/8*8 - (length) (between 0 and 7) |
| 189 | * bytes of all-zero bytes */ |
| 190 | uint32_t bitmaps[0]; /* List of bitmaps - supported versions */ |
| 191 | }; |
| 192 | OFP_ASSERT(sizeof(struct ofp_hello_elem_versionbitmap) == 4); |
| 193 | |
| 194 | /* OFPT_HELLO. This message includes zero or more hello elements having |
| 195 | * variable size. Unknown elements types must be ignored/skipped, to allow |
| 196 | * for future extensions. */ |
| 197 | struct ofp_hello { |
| 198 | struct ofp_header header; |
| 199 | |
| 200 | /* Hello element list */ |
| 201 | struct ofp_hello_elem_header elements[0]; |
| 202 | }; |
| 203 | OFP_ASSERT(sizeof(struct ofp_hello) == 8); |
| 204 | |
| 205 | #define OFP_DEFAULT_MISS_SEND_LEN 128 |
| 206 | |
| 207 | enum ofp_config_flags { |
| 208 | /* Handling of IP fragments. */ |
| 209 | OFPC_FRAG_NORMAL = 0, /* No special handling for fragments. */ |
| 210 | OFPC_FRAG_DROP = 1 << 0, /* Drop fragments. */ |
| 211 | OFPC_FRAG_REASM = 1 << 1, /* Reassemble (only if OFPC_IP_REASM set). */ |
| 212 | OFPC_FRAG_MASK = 3, |
| 213 | }; |
| 214 | |
| 215 | /* Switch configuration. */ |
| 216 | struct ofp_switch_config { |
| 217 | struct ofp_header header; |
| 218 | uint16_t flags; /* OFPC_* flags. */ |
| 219 | uint16_t miss_send_len; /* Max bytes of packet that datapath |
| 220 | should send to the controller. See |
| 221 | ofp_controller_max_len for valid values. |
| 222 | */ |
| 223 | }; |
| 224 | OFP_ASSERT(sizeof(struct ofp_switch_config) == 12); |
| 225 | |
| 226 | /* Flags to configure the table. Reserved for future use. */ |
| 227 | enum ofp_table_config { |
| 228 | OFPTC_DEPRECATED_MASK = 3, /* Deprecated bits */ |
| 229 | }; |
| 230 | |
| 231 | /* Table numbering. Tables can use any number up to OFPT_MAX. */ |
| 232 | enum ofp_table { |
| 233 | /* Last usable table number. */ |
| 234 | OFPTT_MAX = 0xfe, |
| 235 | |
| 236 | /* Fake tables. */ |
| 237 | OFPTT_ALL = 0xff /* Wildcard table used for table config, |
| 238 | flow stats and flow deletes. */ |
| 239 | }; |
| 240 | |
| 241 | |
| 242 | /* Configure/Modify behavior of a flow table */ |
| 243 | struct ofp_table_mod { |
| 244 | struct ofp_header header; |
| 245 | uint8_t table_id; /* ID of the table, OFPTT_ALL indicates all tables */ |
| 246 | uint8_t pad[3]; /* Pad to 32 bits */ |
| 247 | uint32_t config; /* Bitmap of OFPTC_* flags */ |
| 248 | }; |
| 249 | OFP_ASSERT(sizeof(struct ofp_table_mod) == 16); |
| 250 | |
| 251 | /* Capabilities supported by the datapath. */ |
| 252 | enum ofp_capabilities { |
| 253 | OFPC_FLOW_STATS = 1 << 0, /* Flow statistics. */ |
| 254 | OFPC_TABLE_STATS = 1 << 1, /* Table statistics. */ |
| 255 | OFPC_PORT_STATS = 1 << 2, /* Port statistics. */ |
| 256 | OFPC_GROUP_STATS = 1 << 3, /* Group statistics. */ |
| 257 | OFPC_IP_REASM = 1 << 5, /* Can reassemble IP fragments. */ |
| 258 | OFPC_QUEUE_STATS = 1 << 6, /* Queue statistics. */ |
| 259 | OFPC_PORT_BLOCKED = 1 << 8 /* Switch will block looping ports. */ |
| 260 | }; |
| 261 | |
| 262 | /* Flags to indicate behavior of the physical port. These flags are |
| 263 | * used in ofp_port to describe the current configuration. They are |
| 264 | * used in the ofp_port_mod message to configure the port's behavior. |
| 265 | */ |
| 266 | enum ofp_port_config { |
| 267 | OFPPC_PORT_DOWN = 1 << 0, /* Port is administratively down. */ |
| 268 | |
| 269 | OFPPC_NO_RECV = 1 << 2, /* Drop all packets received by port. */ |
| 270 | OFPPC_NO_FWD = 1 << 5, /* Drop packets forwarded to port. */ |
| 271 | OFPPC_NO_PACKET_IN = 1 << 6 /* Do not send packet-in msgs for port. */ |
| 272 | }; |
| 273 | |
| 274 | /* Current state of the physical port. These are not configurable from |
| 275 | * the controller. |
| 276 | */ |
| 277 | enum ofp_port_state { |
| 278 | OFPPS_LINK_DOWN = 1 << 0, /* No physical link present. */ |
| 279 | OFPPS_BLOCKED = 1 << 1, /* Port is blocked */ |
| 280 | OFPPS_LIVE = 1 << 2, /* Live for Fast Failover Group. */ |
| 281 | }; |
| 282 | |
| 283 | /* Features of ports available in a datapath. */ |
| 284 | enum ofp_port_features { |
| 285 | OFPPF_10MB_HD = 1 << 0, /* 10 Mb half-duplex rate support. */ |
| 286 | OFPPF_10MB_FD = 1 << 1, /* 10 Mb full-duplex rate support. */ |
| 287 | OFPPF_100MB_HD = 1 << 2, /* 100 Mb half-duplex rate support. */ |
| 288 | OFPPF_100MB_FD = 1 << 3, /* 100 Mb full-duplex rate support. */ |
| 289 | OFPPF_1GB_HD = 1 << 4, /* 1 Gb half-duplex rate support. */ |
| 290 | OFPPF_1GB_FD = 1 << 5, /* 1 Gb full-duplex rate support. */ |
| 291 | OFPPF_10GB_FD = 1 << 6, /* 10 Gb full-duplex rate support. */ |
| 292 | OFPPF_40GB_FD = 1 << 7, /* 40 Gb full-duplex rate support. */ |
| 293 | OFPPF_100GB_FD = 1 << 8, /* 100 Gb full-duplex rate support. */ |
| 294 | OFPPF_1TB_FD = 1 << 9, /* 1 Tb full-duplex rate support. */ |
| 295 | OFPPF_OTHER = 1 << 10, /* Other rate, not in the list. */ |
| 296 | |
| 297 | OFPPF_COPPER = 1 << 11, /* Copper medium. */ |
| 298 | OFPPF_FIBER = 1 << 12, /* Fiber medium. */ |
| 299 | OFPPF_AUTONEG = 1 << 13, /* Auto-negotiation. */ |
| 300 | OFPPF_PAUSE = 1 << 14, /* Pause. */ |
| 301 | OFPPF_PAUSE_ASYM = 1 << 15 /* Asymmetric pause. */ |
| 302 | }; |
| 303 | |
| 304 | /* Description of a port */ |
| 305 | struct ofp_port { |
| 306 | uint32_t port_no; |
| 307 | uint8_t pad[4]; |
| 308 | uint8_t hw_addr[OFP_ETH_ALEN]; |
| 309 | uint8_t pad2[2]; /* Align to 64 bits. */ |
| 310 | char name[OFP_MAX_PORT_NAME_LEN]; /* Null-terminated */ |
| 311 | |
| 312 | uint32_t config; /* Bitmap of OFPPC_* flags. */ |
| 313 | uint32_t state; /* Bitmap of OFPPS_* flags. */ |
| 314 | |
| 315 | /* Bitmaps of OFPPF_* that describe features. All bits zeroed if |
| 316 | * unsupported or unavailable. */ |
| 317 | uint32_t curr; /* Current features. */ |
| 318 | uint32_t advertised; /* Features being advertised by the port. */ |
| 319 | uint32_t supported; /* Features supported by the port. */ |
| 320 | uint32_t peer; /* Features advertised by peer. */ |
| 321 | |
| 322 | uint32_t curr_speed; /* Current port bitrate in kbps. */ |
| 323 | uint32_t max_speed; /* Max port bitrate in kbps */ |
| 324 | }; |
| 325 | OFP_ASSERT(sizeof(struct ofp_port) == 64); |
| 326 | |
| 327 | /* Switch features. */ |
| 328 | struct ofp_switch_features { |
| 329 | struct ofp_header header; |
| 330 | uint64_t datapath_id; /* Datapath unique ID. The lower 48-bits are for |
| 331 | a MAC address, while the upper 16-bits are |
| 332 | implementer-defined. */ |
| 333 | |
| 334 | uint32_t n_buffers; /* Max packets buffered at once. */ |
| 335 | |
| 336 | uint8_t n_tables; /* Number of tables supported by datapath. */ |
| 337 | uint8_t auxiliary_id; /* Identify auxiliary connections */ |
| 338 | uint8_t pad[2]; /* Align to 64-bits. */ |
| 339 | |
| 340 | /* Features. */ |
| 341 | uint32_t capabilities; /* Bitmap of support "ofp_capabilities". */ |
| 342 | uint32_t reserved; |
| 343 | }; |
| 344 | OFP_ASSERT(sizeof(struct ofp_switch_features) == 32); |
| 345 | |
| 346 | /* What changed about the physical port */ |
| 347 | enum ofp_port_reason { |
| 348 | OFPPR_ADD = 0, /* The port was added. */ |
| 349 | OFPPR_DELETE = 1, /* The port was removed. */ |
| 350 | OFPPR_MODIFY = 2, /* Some attribute of the port has changed. */ |
| 351 | }; |
| 352 | |
| 353 | /* A physical port has changed in the datapath */ |
| 354 | struct ofp_port_status { |
| 355 | struct ofp_header header; |
| 356 | uint8_t reason; /* One of OFPPR_*. */ |
| 357 | uint8_t pad[7]; /* Align to 64-bits. */ |
| 358 | struct ofp_port desc; |
| 359 | }; |
| 360 | OFP_ASSERT(sizeof(struct ofp_port_status) == 80); |
| 361 | |
| 362 | /* Modify behavior of the physical port */ |
| 363 | struct ofp_port_mod { |
| 364 | struct ofp_header header; |
| 365 | uint32_t port_no; |
| 366 | uint8_t pad[4]; |
| 367 | uint8_t hw_addr[OFP_ETH_ALEN]; /* The hardware address is not |
| 368 | configurable. This is used to |
| 369 | sanity-check the request, so it must |
| 370 | be the same as returned in an |
| 371 | ofp_port struct. */ |
| 372 | uint8_t pad2[2]; /* Pad to 64 bits. */ |
| 373 | uint32_t config; /* Bitmap of OFPPC_* flags. */ |
| 374 | uint32_t mask; /* Bitmap of OFPPC_* flags to be changed. */ |
| 375 | |
| 376 | uint32_t advertise; /* Bitmap of OFPPF_*. Zero all bits to prevent |
| 377 | any action taking place. */ |
| 378 | uint8_t pad3[4]; /* Pad to 64 bits. */ |
| 379 | }; |
| 380 | OFP_ASSERT(sizeof(struct ofp_port_mod) == 40); |
| 381 | |
| 382 | /* ## -------------------------- ## */ |
| 383 | /* ## OpenFlow Extensible Match. ## */ |
| 384 | /* ## -------------------------- ## */ |
| 385 | |
| 386 | /* The match type indicates the match structure (set of fields that compose the |
| 387 | * match) in use. The match type is placed in the type field at the beginning |
| 388 | * of all match structures. The "OpenFlow Extensible Match" type corresponds |
| 389 | * to OXM TLV format described below and must be supported by all OpenFlow |
| 390 | * switches. Extensions that define other match types may be published on the |
| 391 | * ONF wiki. Support for extensions is optional. |
| 392 | */ |
| 393 | enum ofp_match_type { |
| 394 | OFPMT_STANDARD = 0, /* Deprecated. */ |
| 395 | OFPMT_OXM = 1, /* OpenFlow Extensible Match */ |
| 396 | }; |
| 397 | |
| 398 | /* Fields to match against flows */ |
| 399 | struct ofp_match { |
| 400 | uint16_t type; /* One of OFPMT_* */ |
| 401 | uint16_t length; /* Length of ofp_match (excluding padding) */ |
| 402 | /* Followed by: |
| 403 | * - Exactly (length - 4) (possibly 0) bytes containing OXM TLVs, then |
| 404 | * - Exactly ((length + 7)/8*8 - length) (between 0 and 7) bytes of |
| 405 | * all-zero bytes |
| 406 | * In summary, ofp_match is padded as needed, to make its overall size |
| 407 | * a multiple of 8, to preserve alignement in structures using it. |
| 408 | */ |
| 409 | uint8_t oxm_fields[4]; /* OXMs start here - Make compiler happy */ |
| 410 | }; |
| 411 | OFP_ASSERT(sizeof(struct ofp_match) == 8); |
| 412 | |
| 413 | /* Components of a OXM TLV header. */ |
| 414 | #define OXM_HEADER__(CLASS, FIELD, HASMASK, LENGTH) \ |
| 415 | (((CLASS) << 16) | ((FIELD) << 9) | ((HASMASK) << 8) | (LENGTH)) |
| 416 | #define OXM_HEADER(CLASS, FIELD, LENGTH) \ |
| 417 | OXM_HEADER__(CLASS, FIELD, 0, LENGTH) |
| 418 | #define OXM_HEADER_W(CLASS, FIELD, LENGTH) \ |
| 419 | OXM_HEADER__(CLASS, FIELD, 1, (LENGTH) * 2) |
| 420 | #define OXM_CLASS(HEADER) ((HEADER) >> 16) |
| 421 | #define OXM_FIELD(HEADER) (((HEADER) >> 9) & 0x7f) |
| 422 | #define OXM_TYPE(HEADER) (((HEADER) >> 9) & 0x7fffff) |
| 423 | #define OXM_HASMASK(HEADER) (((HEADER) >> 8) & 1) |
| 424 | #define OXM_LENGTH(HEADER) ((HEADER) & 0xff) |
| 425 | |
| 426 | #define OXM_MAKE_WILD_HEADER(HEADER) \ |
| 427 | OXM_HEADER_W(OXM_CLASS(HEADER), OXM_FIELD(HEADER), OXM_LENGTH(HEADER)) |
| 428 | |
| 429 | /* OXM Class IDs. |
| 430 | * The high order bit differentiate reserved classes from member classes. |
| 431 | * Classes 0x0000 to 0x7FFF are member classes, allocated by ONF. |
| 432 | * Classes 0x8000 to 0xFFFE are reserved classes, reserved for standardisation. |
| 433 | */ |
| 434 | enum ofp_oxm_class { |
| 435 | OFPXMC_NXM_0 = 0x0000, /* Backward compatibility with NXM */ |
| 436 | OFPXMC_NXM_1 = 0x0001, /* Backward compatibility with NXM */ |
| 437 | OFPXMC_OPENFLOW_BASIC = 0x8000, /* Basic class for OpenFlow */ |
| 438 | OFPXMC_EXPERIMENTER = 0xFFFF, /* Experimenter class */ |
| 439 | }; |
| 440 | |
| 441 | /* OXM Flow match field types for OpenFlow basic class. */ |
| 442 | enum oxm_ofb_match_fields { |
| 443 | OFPXMT_OFB_IN_PORT = 0, /* Switch input port. */ |
| 444 | OFPXMT_OFB_IN_PHY_PORT = 1, /* Switch physical input port. */ |
| 445 | OFPXMT_OFB_METADATA = 2, /* Metadata passed between tables. */ |
| 446 | OFPXMT_OFB_ETH_DST = 3, /* Ethernet destination address. */ |
| 447 | OFPXMT_OFB_ETH_SRC = 4, /* Ethernet source address. */ |
| 448 | OFPXMT_OFB_ETH_TYPE = 5, /* Ethernet frame type. */ |
| 449 | OFPXMT_OFB_VLAN_VID = 6, /* VLAN id. */ |
| 450 | OFPXMT_OFB_VLAN_PCP = 7, /* VLAN priority. */ |
| 451 | OFPXMT_OFB_IP_DSCP = 8, /* IP DSCP (6 bits in ToS field). */ |
| 452 | OFPXMT_OFB_IP_ECN = 9, /* IP ECN (2 bits in ToS field). */ |
| 453 | OFPXMT_OFB_IP_PROTO = 10, /* IP protocol. */ |
| 454 | OFPXMT_OFB_IPV4_SRC = 11, /* IPv4 source address. */ |
| 455 | OFPXMT_OFB_IPV4_DST = 12, /* IPv4 destination address. */ |
| 456 | OFPXMT_OFB_TCP_SRC = 13, /* TCP source port. */ |
| 457 | OFPXMT_OFB_TCP_DST = 14, /* TCP destination port. */ |
| 458 | OFPXMT_OFB_UDP_SRC = 15, /* UDP source port. */ |
| 459 | OFPXMT_OFB_UDP_DST = 16, /* UDP destination port. */ |
| 460 | OFPXMT_OFB_SCTP_SRC = 17, /* SCTP source port. */ |
| 461 | OFPXMT_OFB_SCTP_DST = 18, /* SCTP destination port. */ |
| 462 | OFPXMT_OFB_ICMPV4_TYPE = 19, /* ICMP type. */ |
| 463 | OFPXMT_OFB_ICMPV4_CODE = 20, /* ICMP code. */ |
| 464 | OFPXMT_OFB_ARP_OP = 21, /* ARP opcode. */ |
| 465 | OFPXMT_OFB_ARP_SPA = 22, /* ARP source IPv4 address. */ |
| 466 | OFPXMT_OFB_ARP_TPA = 23, /* ARP target IPv4 address. */ |
| 467 | OFPXMT_OFB_ARP_SHA = 24, /* ARP source hardware address. */ |
| 468 | OFPXMT_OFB_ARP_THA = 25, /* ARP target hardware address. */ |
| 469 | OFPXMT_OFB_IPV6_SRC = 26, /* IPv6 source address. */ |
| 470 | OFPXMT_OFB_IPV6_DST = 27, /* IPv6 destination address. */ |
| 471 | OFPXMT_OFB_IPV6_FLABEL = 28, /* IPv6 Flow Label */ |
| 472 | OFPXMT_OFB_ICMPV6_TYPE = 29, /* ICMPv6 type. */ |
| 473 | OFPXMT_OFB_ICMPV6_CODE = 30, /* ICMPv6 code. */ |
| 474 | OFPXMT_OFB_IPV6_ND_TARGET = 31, /* Target address for ND. */ |
| 475 | OFPXMT_OFB_IPV6_ND_SLL = 32, /* Source link-layer for ND. */ |
| 476 | OFPXMT_OFB_IPV6_ND_TLL = 33, /* Target link-layer for ND. */ |
| 477 | OFPXMT_OFB_MPLS_LABEL = 34, /* MPLS label. */ |
| 478 | OFPXMT_OFB_MPLS_TC = 35, /* MPLS TC. */ |
| 479 | OFPXMT_OFP_MPLS_BOS = 36, /* MPLS BoS bit. */ |
| 480 | OFPXMT_OFB_PBB_ISID = 37, /* PBB I-SID. */ |
| 481 | OFPXMT_OFB_TUNNEL_ID = 38, /* Logical Port Metadata. */ |
| 482 | OFPXMT_OFB_IPV6_EXTHDR = 39, /* IPv6 Extension Header pseudo-field */ |
| 483 | }; |
| 484 | |
| 485 | #define OFPXMT_OFB_ALL ((UINT64_C(1) << 40) - 1) |
| 486 | |
| 487 | /* OpenFlow port on which the packet was received. |
| 488 | * May be a physical port, a logical port, or the reserved port OFPP_LOCAL |
| 489 | * |
| 490 | * Prereqs: None. |
| 491 | * |
| 492 | * Format: 32-bit integer in network byte order. |
| 493 | * |
| 494 | * Masking: Not maskable. */ |
| 495 | #define OXM_OF_IN_PORT OXM_HEADER (0x8000, OFPXMT_OFB_IN_PORT, 4) |
| 496 | |
| 497 | /* Physical port on which the packet was received. |
| 498 | * |
| 499 | * Consider a packet received on a tunnel interface defined over a link |
| 500 | * aggregation group (LAG) with two physical port members. If the tunnel |
| 501 | * interface is the logical port bound to OpenFlow. In this case, |
| 502 | * OFPXMT_OF_IN_PORT is the tunnel's port number and OFPXMT_OF_IN_PHY_PORT is |
| 503 | * the physical port number of the LAG on which the tunnel is configured. |
| 504 | * |
| 505 | * When a packet is received directly on a physical port and not processed by a |
| 506 | * logical port, OFPXMT_OF_IN_PORT and OFPXMT_OF_IN_PHY_PORT have the same |
| 507 | * value. |
| 508 | * |
| 509 | * This field is usually not available in a regular match and only available |
| 510 | * in ofp_packet_in messages when it's different from OXM_OF_IN_PORT. |
| 511 | * |
| 512 | * Prereqs: OXM_OF_IN_PORT must be present. |
| 513 | * |
| 514 | * Format: 32-bit integer in network byte order. |
| 515 | * |
| 516 | * Masking: Not maskable. */ |
| 517 | #define OXM_OF_IN_PHY_PORT OXM_HEADER (0x8000, OFPXMT_OFB_IN_PHY_PORT, 4) |
| 518 | |
| 519 | /* Table metadata. |
| 520 | * |
| 521 | * Prereqs: None. |
| 522 | * |
| 523 | * Format: 64-bit integer in network byte order. |
| 524 | * |
| 525 | * Masking: Arbitrary masks. |
| 526 | */ |
| 527 | #define OXM_OF_METADATA OXM_HEADER (0x8000, OFPXMT_OFB_METADATA, 8) |
| 528 | #define OXM_OF_METADATA_W OXM_HEADER_W(0x8000, OFPXMT_OFB_METADATA, 8) |
| 529 | |
| 530 | /* Source or destination address in Ethernet header. |
| 531 | * |
| 532 | * Prereqs: None. |
| 533 | * |
| 534 | * Format: 48-bit Ethernet MAC address. |
| 535 | * |
| 536 | * Masking: Arbitrary masks. */ |
| 537 | #define OXM_OF_ETH_DST OXM_HEADER (0x8000, OFPXMT_OFB_ETH_DST, 6) |
| 538 | #define OXM_OF_ETH_DST_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ETH_DST, 6) |
| 539 | #define OXM_OF_ETH_SRC OXM_HEADER (0x8000, OFPXMT_OFB_ETH_SRC, 6) |
| 540 | #define OXM_OF_ETH_SRC_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ETH_SRC, 6) |
| 541 | |
| 542 | /* Packet's Ethernet type. |
| 543 | * |
| 544 | * Prereqs: None. |
| 545 | * |
| 546 | * Format: 16-bit integer in network byte order. |
| 547 | * |
| 548 | * Masking: Not maskable. */ |
| 549 | #define OXM_OF_ETH_TYPE OXM_HEADER (0x8000, OFPXMT_OFB_ETH_TYPE, 2) |
| 550 | |
| 551 | /* The VLAN id is 12-bits, so we can use the entire 16 bits to indicate |
| 552 | * special conditions. |
| 553 | */ |
| 554 | enum ofp_vlan_id { |
| 555 | OFPVID_PRESENT = 0x1000, /* Bit that indicate that a VLAN id is set */ |
| 556 | OFPVID_NONE = 0x0000, /* No VLAN id was set. */ |
| 557 | }; |
| 558 | /* Define for compatibility */ |
| 559 | #define OFP_VLAN_NONE OFPVID_NONE |
| 560 | |
| 561 | /* 802.1Q VID. |
| 562 | * |
| 563 | * For a packet with an 802.1Q header, this is the VLAN-ID (VID) from the |
| 564 | * outermost tag, with the CFI bit forced to 1. For a packet with no 802.1Q |
| 565 | * header, this has value OFPVID_NONE. |
| 566 | * |
| 567 | * Prereqs: None. |
| 568 | * |
| 569 | * Format: 16-bit integer in network byte order with bit 13 indicating |
| 570 | * presence of VLAN header and 3 most-significant bits forced to 0. |
| 571 | * Only the lower 13 bits have meaning. |
| 572 | * |
| 573 | * Masking: Arbitrary masks. |
| 574 | * |
| 575 | * This field can be used in various ways: |
| 576 | * |
| 577 | * - If it is not constrained at all, the nx_match matches packets without |
| 578 | * an 802.1Q header or with an 802.1Q header that has any VID value. |
| 579 | * |
| 580 | * - Testing for an exact match with 0x0 matches only packets without |
| 581 | * an 802.1Q header. |
| 582 | * |
| 583 | * - Testing for an exact match with a VID value with CFI=1 matches packets |
| 584 | * that have an 802.1Q header with a specified VID. |
| 585 | * |
| 586 | * - Testing for an exact match with a nonzero VID value with CFI=0 does |
| 587 | * not make sense. The switch may reject this combination. |
| 588 | * |
| 589 | * - Testing with nxm_value=0, nxm_mask=0x0fff matches packets with no 802.1Q |
| 590 | * header or with an 802.1Q header with a VID of 0. |
| 591 | * |
| 592 | * - Testing with nxm_value=0x1000, nxm_mask=0x1000 matches packets with |
| 593 | * an 802.1Q header that has any VID value. |
| 594 | */ |
| 595 | #define OXM_OF_VLAN_VID OXM_HEADER (0x8000, OFPXMT_OFB_VLAN_VID, 2) |
| 596 | #define OXM_OF_VLAN_VID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_VLAN_VID, 2) |
| 597 | |
| 598 | /* 802.1Q PCP. |
| 599 | * |
| 600 | * For a packet with an 802.1Q header, this is the VLAN-PCP from the |
| 601 | * outermost tag. For a packet with no 802.1Q header, this has value |
| 602 | * 0. |
| 603 | * |
| 604 | * Prereqs: OXM_OF_VLAN_VID must be different from OFPVID_NONE. |
| 605 | * |
| 606 | * Format: 8-bit integer with 5 most-significant bits forced to 0. |
| 607 | * Only the lower 3 bits have meaning. |
| 608 | * |
| 609 | * Masking: Not maskable. |
| 610 | */ |
| 611 | #define OXM_OF_VLAN_PCP OXM_HEADER (0x8000, OFPXMT_OFB_VLAN_PCP, 1) |
| 612 | |
| 613 | /* The Diff Serv Code Point (DSCP) bits of the IP header. |
| 614 | * Part of the IPv4 ToS field or the IPv6 Traffic Class field. |
| 615 | * |
| 616 | * Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. |
| 617 | * |
| 618 | * Format: 8-bit integer with 2 most-significant bits forced to 0. |
| 619 | * Only the lower 6 bits have meaning. |
| 620 | * |
| 621 | * Masking: Not maskable. */ |
| 622 | #define OXM_OF_IP_DSCP OXM_HEADER (0x8000, OFPXMT_OFB_IP_DSCP, 1) |
| 623 | |
| 624 | /* The ECN bits of the IP header. |
| 625 | * Part of the IPv4 ToS field or the IPv6 Traffic Class field. |
| 626 | * |
| 627 | * Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. |
| 628 | * |
| 629 | * Format: 8-bit integer with 6 most-significant bits forced to 0. |
| 630 | * Only the lower 2 bits have meaning. |
| 631 | * |
| 632 | * Masking: Not maskable. */ |
| 633 | #define OXM_OF_IP_ECN OXM_HEADER (0x8000, OFPXMT_OFB_IP_ECN, 1) |
| 634 | |
| 635 | /* The "protocol" byte in the IP header. |
| 636 | * |
| 637 | * Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. |
| 638 | * |
| 639 | * Format: 8-bit integer. |
| 640 | * |
| 641 | * Masking: Not maskable. */ |
| 642 | #define OXM_OF_IP_PROTO OXM_HEADER (0x8000, OFPXMT_OFB_IP_PROTO, 1) |
| 643 | |
| 644 | /* The source or destination address in the IP header. |
| 645 | * |
| 646 | * Prereqs: OXM_OF_ETH_TYPE must match 0x0800 exactly. |
| 647 | * |
| 648 | * Format: 32-bit integer in network byte order. |
| 649 | * |
| 650 | * Masking: Arbitrary masks. |
| 651 | */ |
| 652 | #define OXM_OF_IPV4_SRC OXM_HEADER (0x8000, OFPXMT_OFB_IPV4_SRC, 4) |
| 653 | #define OXM_OF_IPV4_SRC_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV4_SRC, 4) |
| 654 | #define OXM_OF_IPV4_DST OXM_HEADER (0x8000, OFPXMT_OFB_IPV4_DST, 4) |
| 655 | #define OXM_OF_IPV4_DST_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV4_DST, 4) |
| 656 | |
| 657 | /* The source or destination port in the TCP header. |
| 658 | * |
| 659 | * Prereqs: |
| 660 | * OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. |
| 661 | * OXM_OF_IP_PROTO must match 6 exactly. |
| 662 | * |
| 663 | * Format: 16-bit integer in network byte order. |
| 664 | * |
| 665 | * Masking: Not maskable. */ |
| 666 | #define OXM_OF_TCP_SRC OXM_HEADER (0x8000, OFPXMT_OFB_TCP_SRC, 2) |
| 667 | #define OXM_OF_TCP_DST OXM_HEADER (0x8000, OFPXMT_OFB_TCP_DST, 2) |
| 668 | |
| 669 | /* The source or destination port in the UDP header. |
| 670 | * |
| 671 | * Prereqs: |
| 672 | * OXM_OF_ETH_TYPE must match either 0x0800 or 0x86dd. |
| 673 | * OXM_OF_IP_PROTO must match 17 exactly. |
| 674 | * |
| 675 | * Format: 16-bit integer in network byte order. |
| 676 | * |
| 677 | * Masking: Not maskable. */ |
| 678 | #define OXM_OF_UDP_SRC OXM_HEADER (0x8000, OFPXMT_OFB_UDP_SRC, 2) |
| 679 | #define OXM_OF_UDP_DST OXM_HEADER (0x8000, OFPXMT_OFB_UDP_DST, 2) |
| 680 | |
| 681 | /* The source or destination port in the SCTP header. |
| 682 | * |
| 683 | * Prereqs: |
| 684 | * OXM_OF_ETH_TYPE must match either 0x0800 or 0x86dd. |
| 685 | * OXM_OF_IP_PROTO must match 132 exactly. |
| 686 | * |
| 687 | * Format: 16-bit integer in network byte order. |
| 688 | * |
| 689 | * Masking: Not maskable. */ |
| 690 | #define OXM_OF_SCTP_SRC OXM_HEADER (0x8000, OFPXMT_OFB_SCTP_SRC, 2) |
| 691 | #define OXM_OF_SCTP_DST OXM_HEADER (0x8000, OFPXMT_OFB_SCTP_DST, 2) |
| 692 | |
| 693 | /* The type or code in the ICMP header. |
| 694 | * |
| 695 | * Prereqs: |
| 696 | * OXM_OF_ETH_TYPE must match 0x0800 exactly. |
| 697 | * OXM_OF_IP_PROTO must match 1 exactly. |
| 698 | * |
| 699 | * Format: 8-bit integer. |
| 700 | * |
| 701 | * Masking: Not maskable. */ |
| 702 | #define OXM_OF_ICMPV4_TYPE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV4_TYPE, 1) |
| 703 | #define OXM_OF_ICMPV4_CODE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV4_CODE, 1) |
| 704 | |
| 705 | /* ARP opcode. |
| 706 | * |
| 707 | * For an Ethernet+IP ARP packet, the opcode in the ARP header. Always 0 |
| 708 | * otherwise. |
| 709 | * |
| 710 | * Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly. |
| 711 | * |
| 712 | * Format: 16-bit integer in network byte order. |
| 713 | * |
| 714 | * Masking: Not maskable. */ |
| 715 | #define OXM_OF_ARP_OP OXM_HEADER (0x8000, OFPXMT_OFB_ARP_OP, 2) |
| 716 | |
| 717 | /* For an Ethernet+IP ARP packet, the source or target protocol address |
| 718 | * in the ARP header. Always 0 otherwise. |
| 719 | * |
| 720 | * Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly. |
| 721 | * |
| 722 | * Format: 32-bit integer in network byte order. |
| 723 | * |
| 724 | * Masking: Arbitrary masks. |
| 725 | */ |
| 726 | #define OXM_OF_ARP_SPA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_SPA, 4) |
| 727 | #define OXM_OF_ARP_SPA_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ARP_SPA, 4) |
| 728 | #define OXM_OF_ARP_TPA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_TPA, 4) |
| 729 | #define OXM_OF_ARP_TPA_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ARP_TPA, 4) |
| 730 | |
| 731 | /* For an Ethernet+IP ARP packet, the source or target hardware address |
| 732 | * in the ARP header. Always 0 otherwise. |
| 733 | * |
| 734 | * Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly. |
| 735 | * |
| 736 | * Format: 48-bit Ethernet MAC address. |
| 737 | * |
| 738 | * Masking: Not maskable. */ |
| 739 | #define OXM_OF_ARP_SHA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_SHA, 6) |
| 740 | #define OXM_OF_ARP_THA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_THA, 6) |
| 741 | |
| 742 | /* The source or destination address in the IPv6 header. |
| 743 | * |
| 744 | * Prereqs: OXM_OF_ETH_TYPE must match 0x86dd exactly. |
| 745 | * |
| 746 | * Format: 128-bit IPv6 address. |
| 747 | * |
| 748 | * Masking: Arbitrary masks. |
| 749 | */ |
| 750 | #define OXM_OF_IPV6_SRC OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_SRC, 16) |
| 751 | #define OXM_OF_IPV6_SRC_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_SRC, 16) |
| 752 | #define OXM_OF_IPV6_DST OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_DST, 16) |
| 753 | #define OXM_OF_IPV6_DST_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_DST, 16) |
| 754 | |
| 755 | /* The IPv6 Flow Label |
| 756 | * |
| 757 | * Prereqs: |
| 758 | * OXM_OF_ETH_TYPE must match 0x86dd exactly |
| 759 | * |
| 760 | * Format: 32-bit integer with 12 most-significant bits forced to 0. |
| 761 | * Only the lower 20 bits have meaning. |
| 762 | * |
| 763 | * Masking: Maskable. */ |
| 764 | #define OXM_OF_IPV6_FLABEL OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_FLABEL, 4) |
| 765 | |
| 766 | /* The type or code in the ICMPv6 header. |
| 767 | * |
| 768 | * Prereqs: |
| 769 | * OXM_OF_ETH_TYPE must match 0x86dd exactly. |
| 770 | * OXM_OF_IP_PROTO must match 58 exactly. |
| 771 | * |
| 772 | * Format: 8-bit integer. |
| 773 | * |
| 774 | * Masking: Not maskable. */ |
| 775 | #define OXM_OF_ICMPV6_TYPE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV6_TYPE, 1) |
| 776 | #define OXM_OF_ICMPV6_CODE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV6_CODE, 1) |
| 777 | |
| 778 | /* The target address in an IPv6 Neighbor Discovery message. |
| 779 | * |
| 780 | * Prereqs: |
| 781 | * OXM_OF_ETH_TYPE must match 0x86dd exactly. |
| 782 | * OXM_OF_IP_PROTO must match 58 exactly. |
| 783 | * OXM_OF_ICMPV6_TYPE must be either 135 or 136. |
| 784 | * |
| 785 | * Format: 128-bit IPv6 address. |
| 786 | * |
| 787 | * Masking: Not maskable. */ |
| 788 | #define OXM_OF_IPV6_ND_TARGET OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_ND_TARGET, 16) |
| 789 | |
| 790 | /* The source link-layer address option in an IPv6 Neighbor Discovery |
| 791 | * message. |
| 792 | * |
| 793 | * Prereqs: |
| 794 | * OXM_OF_ETH_TYPE must match 0x86dd exactly. |
| 795 | * OXM_OF_IP_PROTO must match 58 exactly. |
| 796 | * OXM_OF_ICMPV6_TYPE must be exactly 135. |
| 797 | * |
| 798 | * Format: 48-bit Ethernet MAC address. |
| 799 | * |
| 800 | * Masking: Not maskable. */ |
| 801 | #define OXM_OF_IPV6_ND_SLL OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_ND_SLL, 6) |
| 802 | |
| 803 | /* The target link-layer address option in an IPv6 Neighbor Discovery |
| 804 | * message. |
| 805 | * |
| 806 | * Prereqs: |
| 807 | * OXM_OF_ETH_TYPE must match 0x86dd exactly. |
| 808 | * OXM_OF_IP_PROTO must match 58 exactly. |
| 809 | * OXM_OF_ICMPV6_TYPE must be exactly 136. |
| 810 | * |
| 811 | * Format: 48-bit Ethernet MAC address. |
| 812 | * |
| 813 | * Masking: Not maskable. */ |
| 814 | #define OXM_OF_IPV6_ND_TLL OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_ND_TLL, 6) |
| 815 | |
| 816 | /* The LABEL in the first MPLS shim header. |
| 817 | * |
| 818 | * Prereqs: |
| 819 | * OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly. |
| 820 | * |
| 821 | * Format: 32-bit integer in network byte order with 12 most-significant |
| 822 | * bits forced to 0. Only the lower 20 bits have meaning. |
| 823 | * |
| 824 | * Masking: Not maskable. */ |
| 825 | #define OXM_OF_MPLS_LABEL OXM_HEADER (0x8000, OFPXMT_OFB_MPLS_LABEL, 4) |
| 826 | |
| 827 | /* The TC in the first MPLS shim header. |
| 828 | * |
| 829 | * Prereqs: |
| 830 | * OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly. |
| 831 | * |
| 832 | * Format: 8-bit integer with 5 most-significant bits forced to 0. |
| 833 | * Only the lower 3 bits have meaning. |
| 834 | * |
| 835 | * Masking: Not maskable. */ |
| 836 | #define OXM_OF_MPLS_TC OXM_HEADER (0x8000, OFPXMT_OFB_MPLS_TC, 1) |
| 837 | |
| 838 | /* The BoS bit in the first MPLS shim header. |
| 839 | * |
| 840 | * Prereqs: |
| 841 | * OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly. |
| 842 | * |
| 843 | * Format: 8-bit integer with 7 most-significant bits forced to 0. |
| 844 | * Only the lowest bit have a meaning. |
| 845 | * |
| 846 | * Masking: Not maskable. */ |
| 847 | #define OXM_OF_MPLS_BOS OXM_HEADER (0x8000, OFPXMT_OFB_MPLS_BOS, 1) |
| 848 | |
| 849 | /* IEEE 802.1ah I-SID. |
| 850 | * |
| 851 | * For a packet with a PBB header, this is the I-SID from the |
| 852 | * outermost service tag. |
| 853 | * |
| 854 | * Prereqs: |
| 855 | * OXM_OF_ETH_TYPE must match 0x88E7 exactly. |
| 856 | * |
| 857 | * Format: 24-bit integer in network byte order. |
| 858 | * |
| 859 | * Masking: Arbitrary masks. */ |
| 860 | #define OXM_OF_PBB_ISID OXM_HEADER (0x8000, OFPXMT_OFB_PBB_ISID, 3) |
| 861 | #define OXM_OF_PBB_ISID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_PBB_ISID, 3) |
| 862 | |
| 863 | /* Logical Port Metadata. |
| 864 | * |
| 865 | * Metadata associated with a logical port. |
| 866 | * If the logical port performs encapsulation and decapsulation, this |
| 867 | * is the demultiplexing field from the encapsulation header. |
| 868 | * For example, for a packet received via GRE tunnel including a (32-bit) key, |
| 869 | * the key is stored in the low 32-bits and the high bits are zeroed. |
| 870 | * For a MPLS logical port, the low 20 bits represent the MPLS Label. |
| 871 | * For a VxLAN logical port, the low 24 bits represent the VNI. |
| 872 | * If the packet is not received through a logical port, the value is 0. |
| 873 | * |
| 874 | * Prereqs: None. |
| 875 | * |
| 876 | * Format: 64-bit integer in network byte order. |
| 877 | * |
| 878 | * Masking: Arbitrary masks. */ |
| 879 | #define OXM_OF_TUNNEL_ID OXM_HEADER (0x8000, OFPXMT_OFB_TUNNEL_ID, 8) |
| 880 | #define OXM_OF_TUNNEL_ID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_TUNNEL_ID, 8) |
| 881 | |
| 882 | /* The IPv6 Extension Header pseudo-field. |
| 883 | * |
| 884 | * Prereqs: |
| 885 | * OXM_OF_ETH_TYPE must match 0x86dd exactly |
| 886 | * |
| 887 | * Format: 16-bit integer with 7 most-significant bits forced to 0. |
| 888 | * Only the lower 9 bits have meaning. |
| 889 | * |
| 890 | * Masking: Maskable. */ |
| 891 | #define OXM_OF_IPV6_EXTHDR OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_EXTHDR, 2) |
| 892 | #define OXM_OF_IPV6_EXTHDR_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_EXTHDR, 2) |
| 893 | |
| 894 | /* Bit definitions for IPv6 Extension Header pseudo-field. */ |
| 895 | enum ofp_ipv6exthdr_flags { |
| 896 | OFPIEH_NONEXT = 1 << 0, /* "No next header" encountered. */ |
| 897 | OFPIEH_ESP = 1 << 1, /* Encrypted Sec Payload header present. */ |
| 898 | OFPIEH_AUTH = 1 << 2, /* Authentication header present. */ |
| 899 | OFPIEH_DEST = 1 << 3, /* 1 or 2 dest headers present. */ |
| 900 | OFPIEH_FRAG = 1 << 4, /* Fragment header present. */ |
| 901 | OFPIEH_ROUTER = 1 << 5, /* Router header present. */ |
| 902 | OFPIEH_HOP = 1 << 6, /* Hop-by-hop header present. */ |
| 903 | OFPIEH_UNREP = 1 << 7, /* Unexpected repeats encountered. */ |
| 904 | OFPIEH_UNSEQ = 1 << 8, /* Unexpected sequencing encountered. */ |
| 905 | }; |
| 906 | |
| 907 | /* Header for OXM experimenter match fields. */ |
| 908 | struct ofp_oxm_experimenter_header { |
| 909 | uint32_t oxm_header; /* oxm_class = OFPXMC_EXPERIMENTER */ |
| 910 | uint32_t experimenter; /* Experimenter ID which takes the same |
| 911 | form as in struct ofp_experimenter_header. */ |
| 912 | }; |
| 913 | OFP_ASSERT(sizeof(struct ofp_oxm_experimenter_header) == 8); |
| 914 | |
| 915 | /* ## ----------------- ## */ |
| 916 | /* ## OpenFlow Actions. ## */ |
| 917 | /* ## ----------------- ## */ |
| 918 | |
| 919 | enum ofp_action_type { |
| 920 | OFPAT_OUTPUT = 0, /* Output to switch port. */ |
| 921 | OFPAT_COPY_TTL_OUT = 11, /* Copy TTL "outwards" -- from next-to-outermost |
| 922 | to outermost */ |
| 923 | OFPAT_COPY_TTL_IN = 12, /* Copy TTL "inwards" -- from outermost to |
| 924 | next-to-outermost */ |
| 925 | OFPAT_SET_MPLS_TTL = 15, /* MPLS TTL */ |
| 926 | OFPAT_DEC_MPLS_TTL = 16, /* Decrement MPLS TTL */ |
| 927 | |
| 928 | OFPAT_PUSH_VLAN = 17, /* Push a new VLAN tag */ |
| 929 | OFPAT_POP_VLAN = 18, /* Pop the outer VLAN tag */ |
| 930 | OFPAT_PUSH_MPLS = 19, /* Push a new MPLS tag */ |
| 931 | OFPAT_POP_MPLS = 20, /* Pop the outer MPLS tag */ |
| 932 | OFPAT_SET_QUEUE = 21, /* Set queue id when outputting to a port */ |
| 933 | OFPAT_GROUP = 22, /* Apply group. */ |
| 934 | OFPAT_SET_NW_TTL = 23, /* IP TTL. */ |
| 935 | OFPAT_DEC_NW_TTL = 24, /* Decrement IP TTL. */ |
| 936 | OFPAT_SET_FIELD = 25, /* Set a header field using OXM TLV format. */ |
| 937 | OFPAT_PUSH_PBB = 26, /* Push a new PBB service tag (I-TAG) */ |
| 938 | OFPAT_POP_PBB = 27, /* Pop the outer PBB service tag (I-TAG) */ |
| 939 | OFPAT_EXPERIMENTER = 0xffff |
| 940 | }; |
| 941 | |
| 942 | /* Action header that is common to all actions. The length includes the |
| 943 | * header and any padding used to make the action 64-bit aligned. |
| 944 | * NB: The length of an action *must* always be a multiple of eight. */ |
| 945 | struct ofp_action_header { |
| 946 | uint16_t type; /* One of OFPAT_*. */ |
| 947 | uint16_t len; /* Length of action, including this |
| 948 | header. This is the length of action, |
| 949 | including any padding to make it |
| 950 | 64-bit aligned. */ |
| 951 | uint8_t pad[4]; |
| 952 | }; |
| 953 | OFP_ASSERT(sizeof(struct ofp_action_header) == 8); |
| 954 | |
| 955 | enum ofp_controller_max_len { |
| 956 | OFPCML_MAX = 0xffe5, /* maximum max_len value which can be used |
| 957 | to request a specific byte length. */ |
| 958 | OFPCML_NO_BUFFER = 0xffff /* indicates that no buffering should be |
| 959 | applied and the whole packet is to be |
| 960 | sent to the controller. */ |
| 961 | }; |
| 962 | |
| 963 | /* Action structure for OFPAT_OUTPUT, which sends packets out 'port'. |
| 964 | * When the 'port' is the OFPP_CONTROLLER, 'max_len' indicates the max |
| 965 | * number of bytes to send. A 'max_len' of zero means no bytes of the |
| 966 | * packet should be sent. A 'max_len' of OFPCML_NO_BUFFER means that |
| 967 | * the packet is not buffered and the complete packet is to be sent to |
| 968 | * the controller. */ |
| 969 | struct ofp_action_output { |
| 970 | uint16_t type; /* OFPAT_OUTPUT. */ |
| 971 | uint16_t len; /* Length is 16. */ |
| 972 | uint32_t port; /* Output port. */ |
| 973 | uint16_t max_len; /* Max length to send to controller. */ |
| 974 | uint8_t pad[6]; /* Pad to 64 bits. */ |
| 975 | }; |
| 976 | OFP_ASSERT(sizeof(struct ofp_action_output) == 16); |
| 977 | |
| 978 | /* Action structure for OFPAT_SET_MPLS_TTL. */ |
| 979 | struct ofp_action_mpls_ttl { |
| 980 | uint16_t type; /* OFPAT_SET_MPLS_TTL. */ |
| 981 | uint16_t len; /* Length is 8. */ |
| 982 | uint8_t mpls_ttl; /* MPLS TTL */ |
| 983 | uint8_t pad[3]; |
| 984 | }; |
| 985 | OFP_ASSERT(sizeof(struct ofp_action_mpls_ttl) == 8); |
| 986 | |
| 987 | /* Action structure for OFPAT_PUSH_VLAN/MPLS/PBB. */ |
| 988 | struct ofp_action_push { |
| 989 | uint16_t type; /* OFPAT_PUSH_VLAN/MPLS/PBB. */ |
| 990 | uint16_t len; /* Length is 8. */ |
| 991 | uint16_t ethertype; /* Ethertype */ |
| 992 | uint8_t pad[2]; |
| 993 | }; |
| 994 | OFP_ASSERT(sizeof(struct ofp_action_push) == 8); |
| 995 | |
| 996 | /* Action structure for OFPAT_POP_MPLS. */ |
| 997 | struct ofp_action_pop_mpls { |
| 998 | uint16_t type; /* OFPAT_POP_MPLS. */ |
| 999 | uint16_t len; /* Length is 8. */ |
| 1000 | uint16_t ethertype; /* Ethertype */ |
| 1001 | uint8_t pad[2]; |
| 1002 | }; |
| 1003 | OFP_ASSERT(sizeof(struct ofp_action_pop_mpls) == 8); |
| 1004 | |
| 1005 | /* Action structure for OFPAT_GROUP. */ |
| 1006 | struct ofp_action_group { |
| 1007 | uint16_t type; /* OFPAT_GROUP. */ |
| 1008 | uint16_t len; /* Length is 8. */ |
| 1009 | uint32_t group_id; /* Group identifier. */ |
| 1010 | }; |
| 1011 | OFP_ASSERT(sizeof(struct ofp_action_group) == 8); |
| 1012 | |
| 1013 | /* Action structure for OFPAT_SET_NW_TTL. */ |
| 1014 | struct ofp_action_nw_ttl { |
| 1015 | uint16_t type; /* OFPAT_SET_NW_TTL. */ |
| 1016 | uint16_t len; /* Length is 8. */ |
| 1017 | uint8_t nw_ttl; /* IP TTL */ |
| 1018 | uint8_t pad[3]; |
| 1019 | }; |
| 1020 | OFP_ASSERT(sizeof(struct ofp_action_nw_ttl) == 8); |
| 1021 | |
| 1022 | /* Action structure for OFPAT_SET_FIELD. */ |
| 1023 | struct ofp_action_set_field { |
| 1024 | uint16_t type; /* OFPAT_SET_FIELD. */ |
| 1025 | uint16_t len; /* Length is padded to 64 bits. */ |
| 1026 | /* Followed by: |
| 1027 | * - Exactly oxm_len bytes containing a single OXM TLV, then |
| 1028 | * - Exactly ((oxm_len + 4) + 7)/8*8 - (oxm_len + 4) (between 0 and 7) |
| 1029 | * bytes of all-zero bytes |
| 1030 | */ |
| 1031 | uint8_t field[4]; /* OXM TLV - Make compiler happy */ |
| 1032 | }; |
| 1033 | OFP_ASSERT(sizeof(struct ofp_action_set_field) == 8); |
| 1034 | |
| 1035 | /* Action header for OFPAT_EXPERIMENTER. |
| 1036 | * The rest of the body is experimenter-defined. */ |
| 1037 | struct ofp_action_experimenter_header { |
| 1038 | uint16_t type; /* OFPAT_EXPERIMENTER. */ |
| 1039 | uint16_t len; /* Length is a multiple of 8. */ |
| 1040 | uint32_t experimenter; /* Experimenter ID which takes the same |
| 1041 | form as in struct |
| 1042 | ofp_experimenter_header. */ |
| 1043 | }; |
| 1044 | OFP_ASSERT(sizeof(struct ofp_action_experimenter_header) == 8); |
| 1045 | |
| 1046 | /* ## ---------------------- ## */ |
| 1047 | /* ## OpenFlow Instructions. ## */ |
| 1048 | /* ## ---------------------- ## */ |
| 1049 | |
| 1050 | enum ofp_instruction_type { |
| 1051 | OFPIT_GOTO_TABLE = 1, /* Setup the next table in the lookup |
| 1052 | pipeline */ |
| 1053 | OFPIT_WRITE_METADATA = 2, /* Setup the metadata field for use later in |
| 1054 | pipeline */ |
| 1055 | OFPIT_WRITE_ACTIONS = 3, /* Write the action(s) onto the datapath action |
| 1056 | set */ |
| 1057 | OFPIT_APPLY_ACTIONS = 4, /* Applies the action(s) immediately */ |
| 1058 | OFPIT_CLEAR_ACTIONS = 5, /* Clears all actions from the datapath |
| 1059 | action set */ |
| 1060 | OFPIT_METER = 6, /* Apply meter (rate limiter) */ |
| 1061 | |
| 1062 | OFPIT_EXPERIMENTER = 0xFFFF /* Experimenter instruction */ |
| 1063 | }; |
| 1064 | |
| 1065 | /* Instruction header that is common to all instructions. The length includes |
| 1066 | * the header and any padding used to make the instruction 64-bit aligned. |
| 1067 | * NB: The length of an instruction *must* always be a multiple of eight. */ |
| 1068 | struct ofp_instruction { |
| 1069 | uint16_t type; /* Instruction type */ |
| 1070 | uint16_t len; /* Length of this struct in bytes. */ |
| 1071 | }; |
| 1072 | OFP_ASSERT(sizeof(struct ofp_instruction) == 4); |
| 1073 | |
| 1074 | /* Instruction structure for OFPIT_GOTO_TABLE */ |
| 1075 | struct ofp_instruction_goto_table { |
| 1076 | uint16_t type; /* OFPIT_GOTO_TABLE */ |
| 1077 | uint16_t len; /* Length of this struct in bytes. */ |
| 1078 | uint8_t table_id; /* Set next table in the lookup pipeline */ |
| 1079 | uint8_t pad[3]; /* Pad to 64 bits. */ |
| 1080 | }; |
| 1081 | OFP_ASSERT(sizeof(struct ofp_instruction_goto_table) == 8); |
| 1082 | |
| 1083 | /* Instruction structure for OFPIT_WRITE_METADATA */ |
| 1084 | struct ofp_instruction_write_metadata { |
| 1085 | uint16_t type; /* OFPIT_WRITE_METADATA */ |
| 1086 | uint16_t len; /* Length of this struct in bytes. */ |
| 1087 | uint8_t pad[4]; /* Align to 64-bits */ |
| 1088 | uint64_t metadata; /* Metadata value to write */ |
| 1089 | uint64_t metadata_mask; /* Metadata write bitmask */ |
| 1090 | }; |
| 1091 | OFP_ASSERT(sizeof(struct ofp_instruction_write_metadata) == 24); |
| 1092 | |
| 1093 | /* Instruction structure for OFPIT_WRITE/APPLY/CLEAR_ACTIONS */ |
| 1094 | struct ofp_instruction_actions { |
| 1095 | uint16_t type; /* One of OFPIT_*_ACTIONS */ |
| 1096 | uint16_t len; /* Length of this struct in bytes. */ |
| 1097 | uint8_t pad[4]; /* Align to 64-bits */ |
| 1098 | struct ofp_action_header actions[0]; /* Actions associated with |
| 1099 | OFPIT_WRITE_ACTIONS and |
| 1100 | OFPIT_APPLY_ACTIONS */ |
| 1101 | }; |
| 1102 | OFP_ASSERT(sizeof(struct ofp_instruction_actions) == 8); |
| 1103 | |
| 1104 | /* Instruction structure for OFPIT_METER */ |
| 1105 | struct ofp_instruction_meter { |
| 1106 | uint16_t type; /* OFPIT_METER */ |
| 1107 | uint16_t len; /* Length is 8. */ |
| 1108 | uint32_t meter_id; /* Meter instance. */ |
| 1109 | }; |
| 1110 | OFP_ASSERT(sizeof(struct ofp_instruction_meter) == 8); |
| 1111 | |
| 1112 | /* Instruction structure for experimental instructions */ |
| 1113 | struct ofp_instruction_experimenter { |
| 1114 | uint16_t type; /* OFPIT_EXPERIMENTER */ |
| 1115 | uint16_t len; /* Length of this struct in bytes */ |
| 1116 | uint32_t experimenter; /* Experimenter ID which takes the same form |
| 1117 | as in struct ofp_experimenter_header. */ |
| 1118 | /* Experimenter-defined arbitrary additional data. */ |
| 1119 | }; |
| 1120 | OFP_ASSERT(sizeof(struct ofp_instruction_experimenter) == 8); |
| 1121 | |
| 1122 | /* ## --------------------------- ## */ |
| 1123 | /* ## OpenFlow Flow Modification. ## */ |
| 1124 | /* ## --------------------------- ## */ |
| 1125 | |
| 1126 | enum ofp_flow_mod_command { |
| 1127 | OFPFC_ADD = 0, /* New flow. */ |
| 1128 | OFPFC_MODIFY = 1, /* Modify all matching flows. */ |
| 1129 | OFPFC_MODIFY_STRICT = 2, /* Modify entry strictly matching wildcards and |
| 1130 | priority. */ |
| 1131 | OFPFC_DELETE = 3, /* Delete all matching flows. */ |
| 1132 | OFPFC_DELETE_STRICT = 4, /* Delete entry strictly matching wildcards and |
| 1133 | priority. */ |
| 1134 | }; |
| 1135 | |
| 1136 | /* Value used in "idle_timeout" and "hard_timeout" to indicate that the entry |
| 1137 | * is permanent. */ |
| 1138 | #define OFP_FLOW_PERMANENT 0 |
| 1139 | |
| 1140 | /* By default, choose a priority in the middle. */ |
| 1141 | #define OFP_DEFAULT_PRIORITY 0x8000 |
| 1142 | |
| 1143 | enum ofp_flow_mod_flags { |
| 1144 | OFPFF_SEND_FLOW_REM = 1 << 0, /* Send flow removed message when flow |
| 1145 | * expires or is deleted. */ |
| 1146 | OFPFF_CHECK_OVERLAP = 1 << 1, /* Check for overlapping entries first. */ |
| 1147 | OFPFF_RESET_COUNTS = 1 << 2, /* Reset flow packet and byte counts. */ |
| 1148 | OFPFF_NO_PKT_COUNTS = 1 << 3, /* Don't keep track of packet count. */ |
| 1149 | OFPFF_NO_BYT_COUNTS = 1 << 4, /* Don't keep track of byte count. */ |
| 1150 | }; |
| 1151 | |
| 1152 | /* Flow setup and teardown (controller -> datapath). */ |
| 1153 | struct ofp_flow_mod { |
| 1154 | struct ofp_header header; |
| 1155 | uint64_t cookie; /* Opaque controller-issued identifier. */ |
| 1156 | uint64_t cookie_mask; /* Mask used to restrict the cookie bits |
| 1157 | that must match when the command is |
| 1158 | OFPFC_MODIFY* or OFPFC_DELETE*. A value |
| 1159 | of 0 indicates no restriction. */ |
| 1160 | |
| 1161 | /* Flow actions. */ |
| 1162 | uint8_t table_id; /* ID of the table to put the flow in. |
| 1163 | For OFPFC_DELETE_* commands, OFPTT_ALL |
| 1164 | can also be used to delete matching |
| 1165 | flows from all tables. */ |
| 1166 | uint8_t command; /* One of OFPFC_*. */ |
| 1167 | uint16_t idle_timeout; /* Idle time before discarding (seconds). */ |
| 1168 | uint16_t hard_timeout; /* Max time before discarding (seconds). */ |
| 1169 | uint16_t priority; /* Priority level of flow entry. */ |
| 1170 | uint32_t buffer_id; /* Buffered packet to apply to, or |
| 1171 | OFP_NO_BUFFER. |
| 1172 | Not meaningful for OFPFC_DELETE*. */ |
| 1173 | uint32_t out_port; /* For OFPFC_DELETE* commands, require |
| 1174 | matching entries to include this as an |
| 1175 | output port. A value of OFPP_ANY |
| 1176 | indicates no restriction. */ |
| 1177 | uint32_t out_group; /* For OFPFC_DELETE* commands, require |
| 1178 | matching entries to include this as an |
| 1179 | output group. A value of OFPG_ANY |
| 1180 | indicates no restriction. */ |
| 1181 | uint16_t flags; /* One of OFPFF_*. */ |
| 1182 | uint8_t pad[2]; |
| 1183 | struct ofp_match match; /* Fields to match. Variable size. */ |
| 1184 | //struct ofp_instruction instructions[0]; /* Instruction set */ |
| 1185 | }; |
| 1186 | OFP_ASSERT(sizeof(struct ofp_flow_mod) == 56); |
| 1187 | |
| 1188 | /* Group numbering. Groups can use any number up to OFPG_MAX. */ |
| 1189 | enum ofp_group { |
| 1190 | /* Last usable group number. */ |
| 1191 | OFPG_MAX = 0xffffff00, |
| 1192 | |
| 1193 | /* Fake groups. */ |
| 1194 | OFPG_ALL = 0xfffffffc, /* Represents all groups for group delete |
| 1195 | commands. */ |
| 1196 | OFPG_ANY = 0xffffffff /* Wildcard group used only for flow stats |
| 1197 | requests. Selects all flows regardless of |
| 1198 | group (including flows with no group). |
| 1199 | */ |
| 1200 | }; |
| 1201 | |
| 1202 | /* Group commands */ |
| 1203 | enum ofp_group_mod_command { |
| 1204 | OFPGC_ADD = 0, /* New group. */ |
| 1205 | OFPGC_MODIFY = 1, /* Modify all matching groups. */ |
| 1206 | OFPGC_DELETE = 2, /* Delete all matching groups. */ |
| 1207 | }; |
| 1208 | |
| 1209 | /* Bucket for use in groups. */ |
| 1210 | struct ofp_bucket { |
| 1211 | uint16_t len; /* Length the bucket in bytes, including |
| 1212 | this header and any padding to make it |
| 1213 | 64-bit aligned. */ |
| 1214 | uint16_t weight; /* Relative weight of bucket. Only |
| 1215 | defined for select groups. */ |
| 1216 | uint32_t watch_port; /* Port whose state affects whether this |
| 1217 | bucket is live. Only required for fast |
| 1218 | failover groups. */ |
| 1219 | uint32_t watch_group; /* Group whose state affects whether this |
| 1220 | bucket is live. Only required for fast |
| 1221 | failover groups. */ |
| 1222 | uint8_t pad[4]; |
| 1223 | struct ofp_action_header actions[0]; /* The action length is inferred |
| 1224 | from the length field in the |
| 1225 | header. */ |
| 1226 | }; |
| 1227 | OFP_ASSERT(sizeof(struct ofp_bucket) == 16); |
| 1228 | |
| 1229 | /* Group setup and teardown (controller -> datapath). */ |
| 1230 | struct ofp_group_mod { |
| 1231 | struct ofp_header header; |
| 1232 | uint16_t command; /* One of OFPGC_*. */ |
| 1233 | uint8_t type; /* One of OFPGT_*. */ |
| 1234 | uint8_t pad; /* Pad to 64 bits. */ |
| 1235 | uint32_t group_id; /* Group identifier. */ |
| 1236 | struct ofp_bucket buckets[0]; /* The length of the bucket array is inferred |
| 1237 | from the length field in the header. */ |
| 1238 | }; |
| 1239 | OFP_ASSERT(sizeof(struct ofp_group_mod) == 16); |
| 1240 | |
| 1241 | /* Group types. Values in the range [128, 255] are reserved for experimental |
| 1242 | * use. */ |
| 1243 | enum ofp_group_type { |
| 1244 | OFPGT_ALL = 0, /* All (multicast/broadcast) group. */ |
| 1245 | OFPGT_SELECT = 1, /* Select group. */ |
| 1246 | OFPGT_INDIRECT = 2, /* Indirect group. */ |
| 1247 | OFPGT_FF = 3, /* Fast failover group. */ |
| 1248 | }; |
| 1249 | |
| 1250 | /* Special buffer-id to indicate 'no buffer' */ |
| 1251 | #define OFP_NO_BUFFER 0xffffffff |
| 1252 | |
| 1253 | /* Send packet (controller -> datapath). */ |
| 1254 | struct ofp_packet_out { |
| 1255 | struct ofp_header header; |
| 1256 | uint32_t buffer_id; /* ID assigned by datapath (OFP_NO_BUFFER |
| 1257 | if none). */ |
| 1258 | uint32_t in_port; /* Packet's input port or OFPP_CONTROLLER. */ |
| 1259 | uint16_t actions_len; /* Size of action array in bytes. */ |
| 1260 | uint8_t pad[6]; |
| 1261 | struct ofp_action_header actions[0]; /* Action list. */ |
| 1262 | /* uint8_t data[0]; */ /* Packet data. The length is inferred |
| 1263 | from the length field in the header. |
| 1264 | (Only meaningful if buffer_id == -1.) */ |
| 1265 | }; |
| 1266 | OFP_ASSERT(sizeof(struct ofp_packet_out) == 24); |
| 1267 | |
| 1268 | /* Why is this packet being sent to the controller? */ |
| 1269 | enum ofp_packet_in_reason { |
| 1270 | OFPR_NO_MATCH = 0, /* No matching flow (table-miss flow entry). */ |
| 1271 | OFPR_ACTION = 1, /* Action explicitly output to controller. */ |
| 1272 | OFPR_INVALID_TTL = 2, /* Packet has invalid TTL */ |
| 1273 | }; |
| 1274 | |
| 1275 | /* Packet received on port (datapath -> controller). */ |
| 1276 | struct ofp_packet_in { |
| 1277 | struct ofp_header header; |
| 1278 | uint32_t buffer_id; /* ID assigned by datapath. */ |
| 1279 | uint16_t total_len; /* Full length of frame. */ |
| 1280 | uint8_t reason; /* Reason packet is being sent (one of OFPR_*) */ |
| 1281 | uint8_t table_id; /* ID of the table that was looked up */ |
| 1282 | uint64_t cookie; /* Cookie of the flow entry that was looked up. */ |
| 1283 | struct ofp_match match; /* Packet metadata. Variable size. */ |
| 1284 | /* Followed by: |
| 1285 | * - Exactly 2 all-zero padding bytes, then |
| 1286 | * - An Ethernet frame whose length is inferred from header.length. |
| 1287 | * The padding bytes preceding the Ethernet frame ensure that the IP |
| 1288 | * header (if any) following the Ethernet header is 32-bit aligned. |
| 1289 | */ |
| 1290 | //uint8_t pad[2]; /* Align to 64 bit + 16 bit */ |
| 1291 | //uint8_t data[0]; /* Ethernet frame */ |
| 1292 | }; |
| 1293 | OFP_ASSERT(sizeof(struct ofp_packet_in) == 32); |
| 1294 | |
| 1295 | /* Why was this flow removed? */ |
| 1296 | enum ofp_flow_removed_reason { |
| 1297 | OFPRR_IDLE_TIMEOUT = 0, /* Flow idle time exceeded idle_timeout. */ |
| 1298 | OFPRR_HARD_TIMEOUT = 1, /* Time exceeded hard_timeout. */ |
| 1299 | OFPRR_DELETE = 2, /* Evicted by a DELETE flow mod. */ |
| 1300 | OFPRR_GROUP_DELETE = 3, /* Group was removed. */ |
| 1301 | }; |
| 1302 | |
| 1303 | /* Flow removed (datapath -> controller). */ |
| 1304 | struct ofp_flow_removed { |
| 1305 | struct ofp_header header; |
| 1306 | uint64_t cookie; /* Opaque controller-issued identifier. */ |
| 1307 | |
| 1308 | uint16_t priority; /* Priority level of flow entry. */ |
| 1309 | uint8_t reason; /* One of OFPRR_*. */ |
| 1310 | uint8_t table_id; /* ID of the table */ |
| 1311 | |
| 1312 | uint32_t duration_sec; /* Time flow was alive in seconds. */ |
| 1313 | uint32_t duration_nsec; /* Time flow was alive in nanoseconds beyond |
| 1314 | duration_sec. */ |
| 1315 | uint16_t idle_timeout; /* Idle timeout from original flow mod. */ |
| 1316 | uint16_t hard_timeout; /* Hard timeout from original flow mod. */ |
| 1317 | uint64_t packet_count; |
| 1318 | uint64_t byte_count; |
| 1319 | struct ofp_match match; /* Description of fields. Variable size. */ |
| 1320 | }; |
| 1321 | OFP_ASSERT(sizeof(struct ofp_flow_removed) == 56); |
| 1322 | |
| 1323 | /* Meter numbering. Flow meters can use any number up to OFPM_MAX. */ |
| 1324 | enum ofp_meter { |
| 1325 | /* Last usable meter. */ |
| 1326 | OFPM_MAX = 0xffff0000, |
| 1327 | |
| 1328 | /* Virtual meters. */ |
| 1329 | OFPM_SLOWPATH = 0xfffffffd, /* Meter for slow datapath. */ |
| 1330 | OFPM_CONTROLLER = 0xfffffffe, /* Meter for controller connection. */ |
| 1331 | OFPM_ALL = 0xffffffff, /* Represents all meters for stat requests |
| 1332 | commands. */ |
| 1333 | }; |
| 1334 | |
| 1335 | /* Meter band types */ |
| 1336 | enum ofp_meter_band_type { |
| 1337 | OFPMBT_DROP = 1, /* Drop packet. */ |
| 1338 | OFPMBT_DSCP_REMARK = 2, /* Remark DSCP in the IP header. */ |
| 1339 | OFPMBT_EXPERIMENTER = 0xFFFF /* Experimenter meter band. */ |
| 1340 | }; |
| 1341 | |
| 1342 | /* Common header for all meter bands */ |
| 1343 | struct ofp_meter_band_header { |
| 1344 | uint16_t type; /* One of OFPMBT_*. */ |
| 1345 | uint16_t len; /* Length in bytes of this band. */ |
| 1346 | uint32_t rate; /* Rate for this band. */ |
| 1347 | uint32_t burst_size; /* Size of bursts. */ |
| 1348 | }; |
| 1349 | OFP_ASSERT(sizeof(struct ofp_meter_band_header) == 12); |
| 1350 | |
| 1351 | /* OFPMBT_DROP band - drop packets */ |
| 1352 | struct ofp_meter_band_drop { |
| 1353 | uint16_t type; /* OFPMBT_DROP. */ |
| 1354 | uint16_t len; /* Length in bytes of this band. */ |
| 1355 | uint32_t rate; /* Rate for dropping packets. */ |
| 1356 | uint32_t burst_size; /* Size of bursts. */ |
| 1357 | uint8_t pad[4]; |
| 1358 | }; |
| 1359 | OFP_ASSERT(sizeof(struct ofp_meter_band_drop) == 16); |
| 1360 | |
| 1361 | /* OFPMBT_DSCP_REMARK band - Remark DSCP in the IP header */ |
| 1362 | struct ofp_meter_band_dscp_remark { |
| 1363 | uint16_t type; /* OFPMBT_DSCP_REMARK. */ |
| 1364 | uint16_t len; /* Length in bytes of this band. */ |
| 1365 | uint32_t rate; /* Rate for remarking packets. */ |
| 1366 | uint32_t burst_size; /* Size of bursts. */ |
| 1367 | uint8_t prec_level; /* Number of precendence level to substract. */ |
| 1368 | uint8_t pad[3]; |
| 1369 | }; |
| 1370 | OFP_ASSERT(sizeof(struct ofp_meter_band_dscp_remark) == 16); |
| 1371 | |
| 1372 | /* OFPMBT_EXPERIMENTER band - Write actions in action set */ |
| 1373 | struct ofp_meter_band_experimenter { |
| 1374 | uint16_t type; /* One of OFPMBT_*. */ |
| 1375 | uint16_t len; /* Length in bytes of this band. */ |
| 1376 | uint32_t rate; /* Rate for this band. */ |
| 1377 | uint32_t burst_size; /* Size of bursts. */ |
| 1378 | uint32_t experimenter; /* Experimenter ID which takes the same |
| 1379 | form as in struct |
| 1380 | ofp_experimenter_header. */ |
| 1381 | }; |
| 1382 | OFP_ASSERT(sizeof(struct ofp_meter_band_experimenter) == 16); |
| 1383 | |
| 1384 | /* Meter commands */ |
| 1385 | enum ofp_meter_mod_command { |
| 1386 | OFPMC_ADD, /* New meter. */ |
| 1387 | OFPMC_MODIFY, /* Modify specified meter. */ |
| 1388 | OFPMC_DELETE, /* Delete specified meter. */ |
| 1389 | }; |
| 1390 | |
| 1391 | /* Meter configuration flags */ |
| 1392 | enum ofp_meter_flags { |
| 1393 | OFPMF_KBPS = 1 << 0, /* Rate value in kb/s (kilo-bit per second). */ |
| 1394 | OFPMF_PKTPS = 1 << 1, /* Rate value in packet/sec. */ |
| 1395 | OFPMF_BURST = 1 << 2, /* Do burst size. */ |
| 1396 | OFPMF_STATS = 1 << 3, /* Collect statistics. */ |
| 1397 | }; |
| 1398 | |
| 1399 | /* Meter configuration. OFPT_METER_MOD. */ |
| 1400 | struct ofp_meter_mod { |
| 1401 | struct ofp_header header; |
| 1402 | uint16_t command; /* One of OFPMC_*. */ |
| 1403 | uint16_t flags; /* One of OFPMF_*. */ |
| 1404 | uint32_t meter_id; /* Meter instance. */ |
| 1405 | struct ofp_meter_band_header bands[0]; /* The bands length is |
| 1406 | inferred from the length field |
| 1407 | in the header. */ |
| 1408 | }; |
| 1409 | OFP_ASSERT(sizeof(struct ofp_meter_mod) == 16); |
| 1410 | |
| 1411 | /* Values for 'type' in ofp_error_message. These values are immutable: they |
| 1412 | * will not change in future versions of the protocol (although new values may |
| 1413 | * be added). */ |
| 1414 | enum ofp_error_type { |
| 1415 | OFPET_HELLO_FAILED = 0, /* Hello protocol failed. */ |
| 1416 | OFPET_BAD_REQUEST = 1, /* Request was not understood. */ |
| 1417 | OFPET_BAD_ACTION = 2, /* Error in action description. */ |
| 1418 | OFPET_BAD_INSTRUCTION = 3, /* Error in instruction list. */ |
| 1419 | OFPET_BAD_MATCH = 4, /* Error in match. */ |
| 1420 | OFPET_FLOW_MOD_FAILED = 5, /* Problem modifying flow entry. */ |
| 1421 | OFPET_GROUP_MOD_FAILED = 6, /* Problem modifying group entry. */ |
| 1422 | OFPET_PORT_MOD_FAILED = 7, /* Port mod request failed. */ |
| 1423 | OFPET_TABLE_MOD_FAILED = 8, /* Table mod request failed. */ |
| 1424 | OFPET_QUEUE_OP_FAILED = 9, /* Queue operation failed. */ |
| 1425 | OFPET_SWITCH_CONFIG_FAILED = 10, /* Switch config request failed. */ |
| 1426 | OFPET_ROLE_REQUEST_FAILED = 11, /* Controller Role request failed. */ |
| 1427 | OFPET_METER_MOD_FAILED = 12, /* Error in meter. */ |
| 1428 | OFPET_TABLE_FEATURES_FAILED = 13, /* Setting table features failed. */ |
| 1429 | OFPET_EXPERIMENTER = 0xffff /* Experimenter error messages. */ |
| 1430 | }; |
| 1431 | |
| 1432 | /* ofp_error_msg 'code' values for OFPET_HELLO_FAILED. 'data' contains an |
| 1433 | * ASCII text string that may give failure details. */ |
| 1434 | enum ofp_hello_failed_code { |
| 1435 | OFPHFC_INCOMPATIBLE = 0, /* No compatible version. */ |
| 1436 | OFPHFC_EPERM = 1, /* Permissions error. */ |
| 1437 | }; |
| 1438 | |
| 1439 | /* ofp_error_msg 'code' values for OFPET_BAD_REQUEST. 'data' contains at least |
| 1440 | * the first 64 bytes of the failed request. */ |
| 1441 | enum ofp_bad_request_code { |
| 1442 | OFPBRC_BAD_VERSION = 0, /* ofp_header.version not supported. */ |
| 1443 | OFPBRC_BAD_TYPE = 1, /* ofp_header.type not supported. */ |
| 1444 | OFPBRC_BAD_MULTIPART = 2, /* ofp_multipart_request.type not supported. */ |
| 1445 | OFPBRC_BAD_EXPERIMENTER = 3, /* Experimenter id not supported |
| 1446 | * (in ofp_experimenter_header or |
| 1447 | * ofp_multipart_request or |
| 1448 | * ofp_multipart_reply). */ |
| 1449 | OFPBRC_BAD_EXP_TYPE = 4, /* Experimenter type not supported. */ |
| 1450 | OFPBRC_EPERM = 5, /* Permissions error. */ |
| 1451 | OFPBRC_BAD_LEN = 6, /* Wrong request length for type. */ |
| 1452 | OFPBRC_BUFFER_EMPTY = 7, /* Specified buffer has already been used. */ |
| 1453 | OFPBRC_BUFFER_UNKNOWN = 8, /* Specified buffer does not exist. */ |
| 1454 | OFPBRC_BAD_TABLE_ID = 9, /* Specified table-id invalid or does not |
| 1455 | * exist. */ |
| 1456 | OFPBRC_IS_SLAVE = 10, /* Denied because controller is slave. */ |
| 1457 | OFPBRC_BAD_PORT = 11, /* Invalid port. */ |
| 1458 | OFPBRC_BAD_PACKET = 12, /* Invalid packet in packet-out. */ |
| 1459 | OFPBRC_MULTIPART_BUFFER_OVERFLOW = 13, /* ofp_multipart_request |
| 1460 | overflowed the assigned buffer. */ |
| 1461 | }; |
| 1462 | |
| 1463 | /* ofp_error_msg 'code' values for OFPET_BAD_ACTION. 'data' contains at least |
| 1464 | * the first 64 bytes of the failed request. */ |
| 1465 | enum ofp_bad_action_code { |
| 1466 | OFPBAC_BAD_TYPE = 0, /* Unknown action type. */ |
| 1467 | OFPBAC_BAD_LEN = 1, /* Length problem in actions. */ |
| 1468 | OFPBAC_BAD_EXPERIMENTER = 2, /* Unknown experimenter id specified. */ |
| 1469 | OFPBAC_BAD_EXP_TYPE = 3, /* Unknown action for experimenter id. */ |
| 1470 | OFPBAC_BAD_OUT_PORT = 4, /* Problem validating output port. */ |
| 1471 | OFPBAC_BAD_ARGUMENT = 5, /* Bad action argument. */ |
| 1472 | OFPBAC_EPERM = 6, /* Permissions error. */ |
| 1473 | OFPBAC_TOO_MANY = 7, /* Can't handle this many actions. */ |
| 1474 | OFPBAC_BAD_QUEUE = 8, /* Problem validating output queue. */ |
| 1475 | OFPBAC_BAD_OUT_GROUP = 9, /* Invalid group id in forward action. */ |
| 1476 | OFPBAC_MATCH_INCONSISTENT = 10, /* Action can't apply for this match, |
| 1477 | or Set-Field missing prerequisite. */ |
| 1478 | OFPBAC_UNSUPPORTED_ORDER = 11, /* Action order is unsupported for the |
| 1479 | action list in an Apply-Actions instruction */ |
| 1480 | OFPBAC_BAD_TAG = 12, /* Actions uses an unsupported |
| 1481 | tag/encap. */ |
| 1482 | OFPBAC_BAD_SET_TYPE = 13, /* Unsupported type in SET_FIELD action. */ |
| 1483 | OFPBAC_BAD_SET_LEN = 14, /* Length problem in SET_FIELD action. */ |
| 1484 | OFPBAC_BAD_SET_ARGUMENT = 15, /* Bad argument in SET_FIELD action. */ |
| 1485 | }; |
| 1486 | |
| 1487 | /* ofp_error_msg 'code' values for OFPET_BAD_INSTRUCTION. 'data' contains at least |
| 1488 | * the first 64 bytes of the failed request. */ |
| 1489 | enum ofp_bad_instruction_code { |
| 1490 | OFPBIC_UNKNOWN_INST = 0, /* Unknown instruction. */ |
| 1491 | OFPBIC_UNSUP_INST = 1, /* Switch or table does not support the |
| 1492 | instruction. */ |
| 1493 | OFPBIC_BAD_TABLE_ID = 2, /* Invalid Table-ID specified. */ |
| 1494 | OFPBIC_UNSUP_METADATA = 3, /* Metadata value unsupported by datapath. */ |
| 1495 | OFPBIC_UNSUP_METADATA_MASK = 4, /* Metadata mask value unsupported by |
| 1496 | datapath. */ |
| 1497 | OFPBIC_BAD_EXPERIMENTER = 5, /* Unknown experimenter id specified. */ |
| 1498 | OFPBIC_BAD_EXP_TYPE = 6, /* Unknown instruction for experimenter id. */ |
| 1499 | OFPBIC_BAD_LEN = 7, /* Length problem in instructions. */ |
| 1500 | OFPBIC_EPERM = 8, /* Permissions error. */ |
| 1501 | }; |
| 1502 | |
| 1503 | /* ofp_error_msg 'code' values for OFPET_BAD_MATCH. 'data' contains at least |
| 1504 | * the first 64 bytes of the failed request. */ |
| 1505 | enum ofp_bad_match_code { |
| 1506 | OFPBMC_BAD_TYPE = 0, /* Unsupported match type specified by the |
| 1507 | match */ |
| 1508 | OFPBMC_BAD_LEN = 1, /* Length problem in match. */ |
| 1509 | OFPBMC_BAD_TAG = 2, /* Match uses an unsupported tag/encap. */ |
| 1510 | OFPBMC_BAD_DL_ADDR_MASK = 3, /* Unsupported datalink addr mask - switch |
| 1511 | does not support arbitrary datalink |
| 1512 | address mask. */ |
| 1513 | OFPBMC_BAD_NW_ADDR_MASK = 4, /* Unsupported network addr mask - switch |
| 1514 | does not support arbitrary network |
| 1515 | address mask. */ |
| 1516 | OFPBMC_BAD_WILDCARDS = 5, /* Unsupported combination of fields masked |
| 1517 | or omitted in the match. */ |
| 1518 | OFPBMC_BAD_FIELD = 6, /* Unsupported field type in the match. */ |
| 1519 | OFPBMC_BAD_VALUE = 7, /* Unsupported value in a match field. */ |
| 1520 | OFPBMC_BAD_MASK = 8, /* Unsupported mask specified in the match, |
| 1521 | field is not dl-address or nw-address. */ |
| 1522 | OFPBMC_BAD_PREREQ = 9, /* A prerequisite was not met. */ |
| 1523 | OFPBMC_DUP_FIELD = 10, /* A field type was duplicated. */ |
| 1524 | OFPBMC_EPERM = 11, /* Permissions error. */ |
| 1525 | }; |
| 1526 | |
| 1527 | /* ofp_error_msg 'code' values for OFPET_FLOW_MOD_FAILED. 'data' contains |
| 1528 | * at least the first 64 bytes of the failed request. */ |
| 1529 | enum ofp_flow_mod_failed_code { |
| 1530 | OFPFMFC_UNKNOWN = 0, /* Unspecified error. */ |
| 1531 | OFPFMFC_TABLE_FULL = 1, /* Flow not added because table was full. */ |
| 1532 | OFPFMFC_BAD_TABLE_ID = 2, /* Table does not exist */ |
| 1533 | OFPFMFC_OVERLAP = 3, /* Attempted to add overlapping flow with |
| 1534 | CHECK_OVERLAP flag set. */ |
| 1535 | OFPFMFC_EPERM = 4, /* Permissions error. */ |
| 1536 | OFPFMFC_BAD_TIMEOUT = 5, /* Flow not added because of unsupported |
| 1537 | idle/hard timeout. */ |
| 1538 | OFPFMFC_BAD_COMMAND = 6, /* Unsupported or unknown command. */ |
| 1539 | OFPFMFC_BAD_FLAGS = 7, /* Unsupported or unknown flags. */ |
| 1540 | }; |
| 1541 | |
| 1542 | /* ofp_error_msg 'code' values for OFPET_GROUP_MOD_FAILED. 'data' contains |
| 1543 | * at least the first 64 bytes of the failed request. */ |
| 1544 | enum ofp_group_mod_failed_code { |
| 1545 | OFPGMFC_GROUP_EXISTS = 0, /* Group not added because a group ADD |
| 1546 | attempted to replace an |
| 1547 | already-present group. */ |
| 1548 | OFPGMFC_INVALID_GROUP = 1, /* Group not added because Group |
| 1549 | specified is invalid. */ |
| 1550 | OFPGMFC_WEIGHT_UNSUPPORTED = 2, /* Switch does not support unequal load |
| 1551 | sharing with select groups. */ |
| 1552 | OFPGMFC_OUT_OF_GROUPS = 3, /* The group table is full. */ |
| 1553 | OFPGMFC_OUT_OF_BUCKETS = 4, /* The maximum number of action buckets |
| 1554 | for a group has been exceeded. */ |
| 1555 | OFPGMFC_CHAINING_UNSUPPORTED = 5, /* Switch does not support groups that |
| 1556 | forward to groups. */ |
| 1557 | OFPGMFC_WATCH_UNSUPPORTED = 6, /* This group cannot watch the watch_port |
| 1558 | or watch_group specified. */ |
| 1559 | OFPGMFC_LOOP = 7, /* Group entry would cause a loop. */ |
| 1560 | OFPGMFC_UNKNOWN_GROUP = 8, /* Group not modified because a group |
| 1561 | MODIFY attempted to modify a |
| 1562 | non-existent group. */ |
| 1563 | OFPGMFC_CHAINED_GROUP = 9, /* Group not deleted because another |
| 1564 | group is forwarding to it. */ |
| 1565 | OFPGMFC_BAD_TYPE = 10, /* Unsupported or unknown group type. */ |
| 1566 | OFPGMFC_BAD_COMMAND = 11, /* Unsupported or unknown command. */ |
| 1567 | OFPGMFC_BAD_BUCKET = 12, /* Error in bucket. */ |
| 1568 | OFPGMFC_BAD_WATCH = 13, /* Error in watch port/group. */ |
| 1569 | OFPGMFC_EPERM = 14, /* Permissions error. */ |
| 1570 | }; |
| 1571 | |
| 1572 | /* ofp_error_msg 'code' values for OFPET_PORT_MOD_FAILED. 'data' contains |
| 1573 | * at least the first 64 bytes of the failed request. */ |
| 1574 | enum ofp_port_mod_failed_code { |
| 1575 | OFPPMFC_BAD_PORT = 0, /* Specified port number does not exist. */ |
| 1576 | OFPPMFC_BAD_HW_ADDR = 1, /* Specified hardware address does not |
| 1577 | * match the port number. */ |
| 1578 | OFPPMFC_BAD_CONFIG = 2, /* Specified config is invalid. */ |
| 1579 | OFPPMFC_BAD_ADVERTISE = 3, /* Specified advertise is invalid. */ |
| 1580 | OFPPMFC_EPERM = 4, /* Permissions error. */ |
| 1581 | }; |
| 1582 | |
| 1583 | /* ofp_error_msg 'code' values for OFPET_TABLE_MOD_FAILED. 'data' contains |
| 1584 | * at least the first 64 bytes of the failed request. */ |
| 1585 | enum ofp_table_mod_failed_code { |
| 1586 | OFPTMFC_BAD_TABLE = 0, /* Specified table does not exist. */ |
| 1587 | OFPTMFC_BAD_CONFIG = 1, /* Specified config is invalid. */ |
| 1588 | OFPTMFC_EPERM = 2, /* Permissions error. */ |
| 1589 | }; |
| 1590 | |
| 1591 | /* ofp_error msg 'code' values for OFPET_QUEUE_OP_FAILED. 'data' contains |
| 1592 | * at least the first 64 bytes of the failed request */ |
| 1593 | enum ofp_queue_op_failed_code { |
| 1594 | OFPQOFC_BAD_PORT = 0, /* Invalid port (or port does not exist). */ |
| 1595 | OFPQOFC_BAD_QUEUE = 1, /* Queue does not exist. */ |
| 1596 | OFPQOFC_EPERM = 2, /* Permissions error. */ |
| 1597 | }; |
| 1598 | |
| 1599 | /* ofp_error_msg 'code' values for OFPET_SWITCH_CONFIG_FAILED. 'data' contains |
| 1600 | * at least the first 64 bytes of the failed request. */ |
| 1601 | enum ofp_switch_config_failed_code { |
| 1602 | OFPSCFC_BAD_FLAGS = 0, /* Specified flags is invalid. */ |
| 1603 | OFPSCFC_BAD_LEN = 1, /* Specified len is invalid. */ |
| 1604 | OFPSCFC_EPERM = 2, /* Permissions error. */ |
| 1605 | }; |
| 1606 | |
| 1607 | /* ofp_error_msg 'code' values for OFPET_ROLE_REQUEST_FAILED. 'data' contains |
| 1608 | * at least the first 64 bytes of the failed request. */ |
| 1609 | enum ofp_role_request_failed_code { |
| 1610 | OFPRRFC_STALE = 0, /* Stale Message: old generation_id. */ |
| 1611 | OFPRRFC_UNSUP = 1, /* Controller role change unsupported. */ |
| 1612 | OFPRRFC_BAD_ROLE = 2, /* Invalid role. */ |
| 1613 | }; |
| 1614 | |
| 1615 | /* ofp_error_msg 'code' values for OFPET_METER_MOD_FAILED. 'data' contains |
| 1616 | * at least the first 64 bytes of the failed request. */ |
| 1617 | enum ofp_meter_mod_failed_code { |
| 1618 | OFPMMFC_UNKNOWN = 0, /* Unspecified error. */ |
| 1619 | OFPMMFC_METER_EXISTS = 1, /* Meter not added because a Meter ADD |
| 1620 | * attempted to replace an existing Meter. */ |
| 1621 | OFPMMFC_INVALID_METER = 2, /* Meter not added because Meter specified |
| 1622 | * is invalid. */ |
| 1623 | OFPMMFC_UNKNOWN_METER = 3, /* Meter not modified because a Meter |
| 1624 | MODIFY attempted to modify a non-existent |
| 1625 | Meter. */ |
| 1626 | OFPMMFC_BAD_COMMAND = 4, /* Unsupported or unknown command. */ |
| 1627 | OFPMMFC_BAD_FLAGS = 5, /* Flag configuration unsupported. */ |
| 1628 | OFPMMFC_BAD_RATE = 6, /* Rate unsupported. */ |
| 1629 | OFPMMFC_BAD_BURST = 7, /* Burst size unsupported. */ |
| 1630 | OFPMMFC_BAD_BAND = 8, /* Band unsupported. */ |
| 1631 | OFPMMFC_BAD_BAND_VALUE = 9, /* Band value unsupported. */ |
| 1632 | OFPMMFC_OUT_OF_METERS = 10, /* No more meters available. */ |
| 1633 | OFPMMFC_OUT_OF_BANDS = 11, /* The maximum number of properties |
| 1634 | * for a meter has been exceeded. */ |
| 1635 | }; |
| 1636 | |
| 1637 | /* ofp_error_msg 'code' values for OFPET_TABLE_FEATURES_FAILED. 'data' contains |
| 1638 | * at least the first 64 bytes of the failed request. */ |
| 1639 | enum ofp_table_features_failed_code { |
| 1640 | OFPTFFC_BAD_TABLE = 0, /* Specified table does not exist. */ |
| 1641 | OFPTFFC_BAD_METADATA = 1, /* Invalid metadata mask. */ |
| 1642 | OFPTFFC_BAD_TYPE = 2, /* Unknown property type. */ |
| 1643 | OFPTFFC_BAD_LEN = 3, /* Length problem in properties. */ |
| 1644 | OFPTFFC_BAD_ARGUMENT = 4, /* Unsupported property value. */ |
| 1645 | OFPTFFC_EPERM = 5, /* Permissions error. */ |
| 1646 | }; |
| 1647 | |
| 1648 | /* OFPT_ERROR: Error message (datapath -> controller). */ |
| 1649 | struct ofp_error_msg { |
| 1650 | struct ofp_header header; |
| 1651 | |
| 1652 | uint16_t type; |
| 1653 | uint16_t code; |
| 1654 | uint8_t data[0]; /* Variable-length data. Interpreted based |
| 1655 | on the type and code. No padding. */ |
| 1656 | }; |
| 1657 | OFP_ASSERT(sizeof(struct ofp_error_msg) == 12); |
| 1658 | |
| 1659 | /* OFPET_EXPERIMENTER: Error message (datapath -> controller). */ |
| 1660 | struct ofp_error_experimenter_msg { |
| 1661 | struct ofp_header header; |
| 1662 | |
| 1663 | uint16_t type; /* OFPET_EXPERIMENTER. */ |
| 1664 | uint16_t exp_type; /* Experimenter defined. */ |
| 1665 | uint32_t experimenter; /* Experimenter ID which takes the same form |
| 1666 | as in struct ofp_experimenter_header. */ |
| 1667 | uint8_t data[0]; /* Variable-length data. Interpreted based |
| 1668 | on the type and code. No padding. */ |
| 1669 | }; |
| 1670 | OFP_ASSERT(sizeof(struct ofp_error_experimenter_msg) == 16); |
| 1671 | |
| 1672 | enum ofp_multipart_types { |
| 1673 | /* Description of this OpenFlow switch. |
| 1674 | * The request body is empty. |
| 1675 | * The reply body is struct ofp_desc. */ |
| 1676 | OFPMP_DESC = 0, |
| 1677 | |
| 1678 | /* Individual flow statistics. |
| 1679 | * The request body is struct ofp_flow_stats_request. |
| 1680 | * The reply body is an array of struct ofp_flow_stats. */ |
| 1681 | OFPMP_FLOW = 1, |
| 1682 | |
| 1683 | /* Aggregate flow statistics. |
| 1684 | * The request body is struct ofp_aggregate_stats_request. |
| 1685 | * The reply body is struct ofp_aggregate_stats_reply. */ |
| 1686 | OFPMP_AGGREGATE = 2, |
| 1687 | |
| 1688 | /* Flow table statistics. |
| 1689 | * The request body is empty. |
| 1690 | * The reply body is an array of struct ofp_table_stats. */ |
| 1691 | OFPMP_TABLE = 3, |
| 1692 | |
| 1693 | /* Port statistics. |
| 1694 | * The request body is struct ofp_port_stats_request. |
| 1695 | * The reply body is an array of struct ofp_port_stats. */ |
| 1696 | OFPMP_PORT_STATS = 4, |
| 1697 | |
| 1698 | /* Queue statistics for a port |
| 1699 | * The request body is struct ofp_queue_stats_request. |
| 1700 | * The reply body is an array of struct ofp_queue_stats */ |
| 1701 | OFPMP_QUEUE = 5, |
| 1702 | |
| 1703 | /* Group counter statistics. |
| 1704 | * The request body is struct ofp_group_stats_request. |
| 1705 | * The reply is an array of struct ofp_group_stats. */ |
| 1706 | OFPMP_GROUP = 6, |
| 1707 | |
| 1708 | /* Group description. |
| 1709 | * The request body is empty. |
| 1710 | * The reply body is an array of struct ofp_group_desc_stats. */ |
| 1711 | OFPMP_GROUP_DESC = 7, |
| 1712 | |
| 1713 | /* Group features. |
| 1714 | * The request body is empty. |
| 1715 | * The reply body is struct ofp_group_features. */ |
| 1716 | OFPMP_GROUP_FEATURES = 8, |
| 1717 | |
| 1718 | /* Meter statistics. |
| 1719 | * The request body is struct ofp_meter_multipart_requests. |
| 1720 | * The reply body is an array of struct ofp_meter_stats. */ |
| 1721 | OFPMP_METER = 9, |
| 1722 | |
| 1723 | /* Meter configuration. |
| 1724 | * The request body is struct ofp_meter_multipart_requests. |
| 1725 | * The reply body is an array of struct ofp_meter_config. */ |
| 1726 | OFPMP_METER_CONFIG = 10, |
| 1727 | |
| 1728 | /* Meter features. |
| 1729 | * The request body is empty. |
| 1730 | * The reply body is struct ofp_meter_features. */ |
| 1731 | OFPMP_METER_FEATURES = 11, |
| 1732 | |
| 1733 | /* Table features. |
| 1734 | * The request body is either empty or contains an array of |
| 1735 | * struct ofp_table_features containing the controller's |
| 1736 | * desired view of the switch. If the switch is unable to |
| 1737 | * set the specified view an error is returned. |
| 1738 | * The reply body is an array of struct ofp_table_features. */ |
| 1739 | OFPMP_TABLE_FEATURES = 12, |
| 1740 | |
| 1741 | /* Port description. |
| 1742 | * The request body is empty. |
| 1743 | * The reply body is an array of struct ofp_port. */ |
| 1744 | OFPMP_PORT_DESC = 13, |
| 1745 | |
| 1746 | /* Experimenter extension. |
| 1747 | * The request and reply bodies begin with |
| 1748 | * struct ofp_experimenter_multipart_header. |
| 1749 | * The request and reply bodies are otherwise experimenter-defined. */ |
| 1750 | OFPMP_EXPERIMENTER = 0xffff |
| 1751 | }; |
| 1752 | |
| 1753 | enum ofp_multipart_request_flags { |
| 1754 | OFPMPF_REQ_MORE = 1 << 0 /* More requests to follow. */ |
| 1755 | }; |
| 1756 | |
| 1757 | struct ofp_multipart_request { |
| 1758 | struct ofp_header header; |
| 1759 | uint16_t type; /* One of the OFPMP_* constants. */ |
| 1760 | uint16_t flags; /* OFPMPF_REQ_* flags. */ |
| 1761 | uint8_t pad[4]; |
| 1762 | uint8_t body[0]; /* Body of the request. */ |
| 1763 | }; |
| 1764 | OFP_ASSERT(sizeof(struct ofp_multipart_request) == 16); |
| 1765 | |
| 1766 | enum ofp_multipart_reply_flags { |
| 1767 | OFPMPF_REPLY_MORE = 1 << 0 /* More replies to follow. */ |
| 1768 | }; |
| 1769 | |
| 1770 | struct ofp_multipart_reply { |
| 1771 | struct ofp_header header; |
| 1772 | uint16_t type; /* One of the OFPMP_* constants. */ |
| 1773 | uint16_t flags; /* OFPMPF_REPLY_* flags. */ |
| 1774 | uint8_t pad[4]; |
| 1775 | uint8_t body[0]; /* Body of the reply. */ |
| 1776 | }; |
| 1777 | OFP_ASSERT(sizeof(struct ofp_multipart_reply) == 16); |
| 1778 | |
| 1779 | #define DESC_STR_LEN 256 |
| 1780 | #define SERIAL_NUM_LEN 32 |
| 1781 | /* Body of reply to OFPMP_DESC request. Each entry is a NULL-terminated |
| 1782 | * ASCII string. */ |
| 1783 | struct ofp_desc { |
| 1784 | char mfr_desc[DESC_STR_LEN]; /* Manufacturer description. */ |
| 1785 | char hw_desc[DESC_STR_LEN]; /* Hardware description. */ |
| 1786 | char sw_desc[DESC_STR_LEN]; /* Software description. */ |
| 1787 | char serial_num[SERIAL_NUM_LEN]; /* Serial number. */ |
| 1788 | char dp_desc[DESC_STR_LEN]; /* Human readable description of datapath. */ |
| 1789 | }; |
| 1790 | OFP_ASSERT(sizeof(struct ofp_desc) == 1056); |
| 1791 | |
| 1792 | /* Body for ofp_multipart_request of type OFPMP_FLOW. */ |
| 1793 | struct ofp_flow_stats_request { |
| 1794 | uint8_t table_id; /* ID of table to read (from ofp_table_stats), |
| 1795 | OFPTT_ALL for all tables. */ |
| 1796 | uint8_t pad[3]; /* Align to 32 bits. */ |
| 1797 | uint32_t out_port; /* Require matching entries to include this |
| 1798 | as an output port. A value of OFPP_ANY |
| 1799 | indicates no restriction. */ |
| 1800 | uint32_t out_group; /* Require matching entries to include this |
| 1801 | as an output group. A value of OFPG_ANY |
| 1802 | indicates no restriction. */ |
| 1803 | uint8_t pad2[4]; /* Align to 64 bits. */ |
| 1804 | uint64_t cookie; /* Require matching entries to contain this |
| 1805 | cookie value */ |
| 1806 | uint64_t cookie_mask; /* Mask used to restrict the cookie bits that |
| 1807 | must match. A value of 0 indicates |
| 1808 | no restriction. */ |
| 1809 | struct ofp_match match; /* Fields to match. Variable size. */ |
| 1810 | }; |
| 1811 | OFP_ASSERT(sizeof(struct ofp_flow_stats_request) == 40); |
| 1812 | |
| 1813 | /* Body of reply to OFPMP_FLOW request. */ |
| 1814 | struct ofp_flow_stats { |
| 1815 | uint16_t length; /* Length of this entry. */ |
| 1816 | uint8_t table_id; /* ID of table flow came from. */ |
| 1817 | uint8_t pad; |
| 1818 | uint32_t duration_sec; /* Time flow has been alive in seconds. */ |
| 1819 | uint32_t duration_nsec; /* Time flow has been alive in nanoseconds beyond |
| 1820 | duration_sec. */ |
| 1821 | uint16_t priority; /* Priority of the entry. */ |
| 1822 | uint16_t idle_timeout; /* Number of seconds idle before expiration. */ |
| 1823 | uint16_t hard_timeout; /* Number of seconds before expiration. */ |
| 1824 | uint16_t flags; /* One of OFPFF_*. */ |
| 1825 | uint8_t pad2[4]; /* Align to 64-bits. */ |
| 1826 | uint64_t cookie; /* Opaque controller-issued identifier. */ |
| 1827 | uint64_t packet_count; /* Number of packets in flow. */ |
| 1828 | uint64_t byte_count; /* Number of bytes in flow. */ |
| 1829 | struct ofp_match match; /* Description of fields. Variable size. */ |
| 1830 | //struct ofp_instruction instructions[0]; /* Instruction set. */ |
| 1831 | }; |
| 1832 | OFP_ASSERT(sizeof(struct ofp_flow_stats) == 56); |
| 1833 | |
| 1834 | /* Body for ofp_multipart_request of type OFPMP_AGGREGATE. */ |
| 1835 | struct ofp_aggregate_stats_request { |
| 1836 | uint8_t table_id; /* ID of table to read (from ofp_table_stats) |
| 1837 | OFPTT_ALL for all tables. */ |
| 1838 | uint8_t pad[3]; /* Align to 32 bits. */ |
| 1839 | uint32_t out_port; /* Require matching entries to include this |
| 1840 | as an output port. A value of OFPP_ANY |
| 1841 | indicates no restriction. */ |
| 1842 | uint32_t out_group; /* Require matching entries to include this |
| 1843 | as an output group. A value of OFPG_ANY |
| 1844 | indicates no restriction. */ |
| 1845 | uint8_t pad2[4]; /* Align to 64 bits. */ |
| 1846 | uint64_t cookie; /* Require matching entries to contain this |
| 1847 | cookie value */ |
| 1848 | uint64_t cookie_mask; /* Mask used to restrict the cookie bits that |
| 1849 | must match. A value of 0 indicates |
| 1850 | no restriction. */ |
| 1851 | struct ofp_match match; /* Fields to match. Variable size. */ |
| 1852 | }; |
| 1853 | OFP_ASSERT(sizeof(struct ofp_aggregate_stats_request) == 40); |
| 1854 | |
| 1855 | /* Body of reply to OFPMP_AGGREGATE request. */ |
| 1856 | struct ofp_aggregate_stats_reply { |
| 1857 | uint64_t packet_count; /* Number of packets in flows. */ |
| 1858 | uint64_t byte_count; /* Number of bytes in flows. */ |
| 1859 | uint32_t flow_count; /* Number of flows. */ |
| 1860 | uint8_t pad[4]; /* Align to 64 bits. */ |
| 1861 | }; |
| 1862 | OFP_ASSERT(sizeof(struct ofp_aggregate_stats_reply) == 24); |
| 1863 | |
| 1864 | /* Table Feature property types. |
| 1865 | * Low order bit cleared indicates a property for a regular Flow Entry. |
| 1866 | * Low order bit set indicates a property for the Table-Miss Flow Entry. |
| 1867 | */ |
| 1868 | enum ofp_table_feature_prop_type { |
| 1869 | OFPTFPT_INSTRUCTIONS = 0, /* Instructions property. */ |
| 1870 | OFPTFPT_INSTRUCTIONS_MISS = 1, /* Instructions for table-miss. */ |
| 1871 | OFPTFPT_NEXT_TABLES = 2, /* Next Table property. */ |
| 1872 | OFPTFPT_NEXT_TABLES_MISS = 3, /* Next Table for table-miss. */ |
| 1873 | OFPTFPT_WRITE_ACTIONS = 4, /* Write Actions property. */ |
| 1874 | OFPTFPT_WRITE_ACTIONS_MISS = 5, /* Write Actions for table-miss. */ |
| 1875 | OFPTFPT_APPLY_ACTIONS = 6, /* Apply Actions property. */ |
| 1876 | OFPTFPT_APPLY_ACTIONS_MISS = 7, /* Apply Actions for table-miss. */ |
| 1877 | OFPTFPT_MATCH = 8, /* Match property. */ |
| 1878 | OFPTFPT_WILDCARDS = 10, /* Wildcards property. */ |
| 1879 | OFPTFPT_WRITE_SETFIELD = 12, /* Write Set-Field property. */ |
| 1880 | OFPTFPT_WRITE_SETFIELD_MISS = 13, /* Write Set-Field for table-miss. */ |
| 1881 | OFPTFPT_APPLY_SETFIELD = 14, /* Apply Set-Field property. */ |
| 1882 | OFPTFPT_APPLY_SETFIELD_MISS = 15, /* Apply Set-Field for table-miss. */ |
| 1883 | OFPTFPT_EXPERIMENTER = 0xFFFE, /* Experimenter property. */ |
| 1884 | OFPTFPT_EXPERIMENTER_MISS = 0xFFFF, /* Experimenter for table-miss. */ |
| 1885 | }; |
| 1886 | |
| 1887 | /* Common header for all Table Feature Properties */ |
| 1888 | struct ofp_table_feature_prop_header { |
| 1889 | uint16_t type; /* One of OFPTFPT_*. */ |
| 1890 | uint16_t length; /* Length in bytes of this property. */ |
| 1891 | }; |
| 1892 | OFP_ASSERT(sizeof(struct ofp_table_feature_prop_header) == 4); |
| 1893 | |
| 1894 | /* Instructions property */ |
| 1895 | struct ofp_table_feature_prop_instructions { |
| 1896 | uint16_t type; /* One of OFPTFPT_INSTRUCTIONS, |
| 1897 | OFPTFPT_INSTRUCTIONS_MISS. */ |
| 1898 | uint16_t length; /* Length in bytes of this property. */ |
| 1899 | /* Followed by: |
| 1900 | * - Exactly (length - 4) bytes containing the instruction ids, then |
| 1901 | * - Exactly (length + 7)/8*8 - (length) (between 0 and 7) |
| 1902 | * bytes of all-zero bytes */ |
| 1903 | struct ofp_instruction instruction_ids[0]; /* List of instructions */ |
| 1904 | }; |
| 1905 | OFP_ASSERT(sizeof(struct ofp_table_feature_prop_instructions) == 4); |
| 1906 | |
| 1907 | /* Next Tables property */ |
| 1908 | struct ofp_table_feature_prop_next_tables { |
| 1909 | uint16_t type; /* One of OFPTFPT_NEXT_TABLES, |
| 1910 | OFPTFPT_NEXT_TABLES_MISS. */ |
| 1911 | uint16_t length; /* Length in bytes of this property. */ |
| 1912 | /* Followed by: |
| 1913 | * - Exactly (length - 4) bytes containing the table_ids, then |
| 1914 | * - Exactly (length + 7)/8*8 - (length) (between 0 and 7) |
| 1915 | * bytes of all-zero bytes */ |
| 1916 | uint8_t next_table_ids[0]; |
| 1917 | }; |
| 1918 | OFP_ASSERT(sizeof(struct ofp_table_feature_prop_next_tables) == 4); |
| 1919 | |
| 1920 | /* Actions property */ |
| 1921 | struct ofp_table_feature_prop_actions { |
| 1922 | uint16_t type; /* One of OFPTFPT_WRITE_ACTIONS, |
| 1923 | OFPTFPT_WRITE_ACTIONS_MISS, |
| 1924 | OFPTFPT_APPLY_ACTIONS, |
| 1925 | OFPTFPT_APPLY_ACTIONS_MISS. */ |
| 1926 | uint16_t length; /* Length in bytes of this property. */ |
| 1927 | /* Followed by: |
| 1928 | * - Exactly (length - 4) bytes containing the action_ids, then |
| 1929 | * - Exactly (length + 7)/8*8 - (length) (between 0 and 7) |
| 1930 | * bytes of all-zero bytes */ |
| 1931 | struct ofp_action_header action_ids[0]; /* List of actions */ |
| 1932 | }; |
| 1933 | OFP_ASSERT(sizeof(struct ofp_table_feature_prop_actions) == 4); |
| 1934 | |
| 1935 | /* Match, Wildcard or Set-Field property */ |
| 1936 | struct ofp_table_feature_prop_oxm { |
| 1937 | uint16_t type; /* One of OFPTFPT_MATCH, |
| 1938 | OFPTFPT_WILDCARDS, |
| 1939 | OFPTFPT_WRITE_SETFIELD, |
| 1940 | OFPTFPT_WRITE_SETFIELD_MISS, |
| 1941 | OFPTFPT_APPLY_SETFIELD, |
| 1942 | OFPTFPT_APPLY_SETFIELD_MISS. */ |
| 1943 | uint16_t length; /* Length in bytes of this property. */ |
| 1944 | /* Followed by: |
| 1945 | * - Exactly (length - 4) bytes containing the oxm_ids, then |
| 1946 | * - Exactly (length + 7)/8*8 - (length) (between 0 and 7) |
| 1947 | * bytes of all-zero bytes */ |
| 1948 | uint32_t oxm_ids[0]; /* Array of OXM headers */ |
| 1949 | }; |
| 1950 | OFP_ASSERT(sizeof(struct ofp_table_feature_prop_oxm) == 4); |
| 1951 | |
| 1952 | /* Experimenter table feature property */ |
| 1953 | struct ofp_table_feature_prop_experimenter { |
| 1954 | uint16_t type; /* One of OFPTFPT_EXPERIMENTER, |
| 1955 | OFPTFPT_EXPERIMENTER_MISS. */ |
| 1956 | uint16_t length; /* Length in bytes of this property. */ |
| 1957 | uint32_t experimenter; /* Experimenter ID which takes the same |
| 1958 | form as in struct |
| 1959 | ofp_experimenter_header. */ |
| 1960 | uint32_t exp_type; /* Experimenter defined. */ |
| 1961 | /* Followed by: |
| 1962 | * - Exactly (length - 12) bytes containing the experimenter data, then |
| 1963 | * - Exactly (length + 7)/8*8 - (length) (between 0 and 7) |
| 1964 | * bytes of all-zero bytes */ |
| 1965 | uint32_t experimenter_data[0]; |
| 1966 | }; |
| 1967 | OFP_ASSERT(sizeof(struct ofp_table_feature_prop_experimenter) == 12); |
| 1968 | |
| 1969 | /* Body for ofp_multipart_request of type OFPMP_TABLE_FEATURES./ |
| 1970 | * Body of reply to OFPMP_TABLE_FEATURES request. */ |
| 1971 | struct ofp_table_features { |
| 1972 | uint16_t length; /* Length is padded to 64 bits. */ |
| 1973 | uint8_t table_id; /* Identifier of table. Lower numbered tables |
| 1974 | are consulted first. */ |
| 1975 | uint8_t pad[5]; /* Align to 64-bits. */ |
| 1976 | char name[OFP_MAX_TABLE_NAME_LEN]; |
| 1977 | uint64_t metadata_match; /* Bits of metadata table can match. */ |
| 1978 | uint64_t metadata_write; /* Bits of metadata table can write. */ |
| 1979 | uint32_t config; /* Bitmap of OFPTC_* values */ |
| 1980 | uint32_t max_entries; /* Max number of entries supported. */ |
| 1981 | |
| 1982 | /* Table Feature Property list */ |
| 1983 | struct ofp_table_feature_prop_header properties[0]; |
| 1984 | }; |
| 1985 | OFP_ASSERT(sizeof(struct ofp_table_features) == 64); |
| 1986 | |
| 1987 | /* Body of reply to OFPMP_TABLE request. */ |
| 1988 | struct ofp_table_stats { |
| 1989 | uint8_t table_id; /* Identifier of table. Lower numbered tables |
| 1990 | are consulted first. */ |
| 1991 | uint8_t pad[3]; /* Align to 32-bits. */ |
| 1992 | uint32_t active_count; /* Number of active entries. */ |
| 1993 | uint64_t lookup_count; /* Number of packets looked up in table. */ |
| 1994 | uint64_t matched_count; /* Number of packets that hit table. */ |
| 1995 | }; |
| 1996 | OFP_ASSERT(sizeof(struct ofp_table_stats) == 24); |
| 1997 | |
| 1998 | /* Body for ofp_multipart_request of type OFPMP_PORT. */ |
| 1999 | struct ofp_port_stats_request { |
| 2000 | uint32_t port_no; /* OFPMP_PORT message must request statistics |
| 2001 | * either for a single port (specified in |
| 2002 | * port_no) or for all ports (if port_no == |
| 2003 | * OFPP_ANY). */ |
| 2004 | uint8_t pad[4]; |
| 2005 | }; |
| 2006 | OFP_ASSERT(sizeof(struct ofp_port_stats_request) == 8); |
| 2007 | |
| 2008 | /* Body of reply to OFPMP_PORT request. If a counter is unsupported, set |
| 2009 | * the field to all ones. */ |
| 2010 | struct ofp_port_stats { |
| 2011 | uint32_t port_no; |
| 2012 | uint8_t pad[4]; /* Align to 64-bits. */ |
| 2013 | uint64_t rx_packets; /* Number of received packets. */ |
| 2014 | uint64_t tx_packets; /* Number of transmitted packets. */ |
| 2015 | uint64_t rx_bytes; /* Number of received bytes. */ |
| 2016 | uint64_t tx_bytes; /* Number of transmitted bytes. */ |
| 2017 | uint64_t rx_dropped; /* Number of packets dropped by RX. */ |
| 2018 | uint64_t tx_dropped; /* Number of packets dropped by TX. */ |
| 2019 | uint64_t rx_errors; /* Number of receive errors. This is a super-set |
| 2020 | of more specific receive errors and should be |
| 2021 | greater than or equal to the sum of all |
| 2022 | rx_*_err values. */ |
| 2023 | uint64_t tx_errors; /* Number of transmit errors. This is a super-set |
| 2024 | of more specific transmit errors and should be |
| 2025 | greater than or equal to the sum of all |
| 2026 | tx_*_err values (none currently defined.) */ |
| 2027 | uint64_t rx_frame_err; /* Number of frame alignment errors. */ |
| 2028 | uint64_t rx_over_err; /* Number of packets with RX overrun. */ |
| 2029 | uint64_t rx_crc_err; /* Number of CRC errors. */ |
| 2030 | uint64_t collisions; /* Number of collisions. */ |
| 2031 | uint32_t duration_sec; /* Time port has been alive in seconds. */ |
| 2032 | uint32_t duration_nsec; /* Time port has been alive in nanoseconds beyond |
| 2033 | duration_sec. */ |
| 2034 | }; |
| 2035 | OFP_ASSERT(sizeof(struct ofp_port_stats) == 112); |
| 2036 | |
| 2037 | /* Body of OFPMP_GROUP request. */ |
| 2038 | struct ofp_group_stats_request { |
| 2039 | uint32_t group_id; /* All groups if OFPG_ALL. */ |
| 2040 | uint8_t pad[4]; /* Align to 64 bits. */ |
| 2041 | }; |
| 2042 | OFP_ASSERT(sizeof(struct ofp_group_stats_request) == 8); |
| 2043 | |
| 2044 | /* Used in group stats replies. */ |
| 2045 | struct ofp_bucket_counter { |
| 2046 | uint64_t packet_count; /* Number of packets processed by bucket. */ |
| 2047 | uint64_t byte_count; /* Number of bytes processed by bucket. */ |
| 2048 | }; |
| 2049 | OFP_ASSERT(sizeof(struct ofp_bucket_counter) == 16); |
| 2050 | |
| 2051 | /* Body of reply to OFPMP_GROUP request. */ |
| 2052 | struct ofp_group_stats { |
| 2053 | uint16_t length; /* Length of this entry. */ |
| 2054 | uint8_t pad[2]; /* Align to 64 bits. */ |
| 2055 | uint32_t group_id; /* Group identifier. */ |
| 2056 | uint32_t ref_count; /* Number of flows or groups that directly forward |
| 2057 | to this group. */ |
| 2058 | uint8_t pad2[4]; /* Align to 64 bits. */ |
| 2059 | uint64_t packet_count; /* Number of packets processed by group. */ |
| 2060 | uint64_t byte_count; /* Number of bytes processed by group. */ |
| 2061 | uint32_t duration_sec; /* Time group has been alive in seconds. */ |
| 2062 | uint32_t duration_nsec; /* Time group has been alive in nanoseconds beyond |
| 2063 | duration_sec. */ |
| 2064 | struct ofp_bucket_counter bucket_stats[0]; |
| 2065 | }; |
| 2066 | OFP_ASSERT(sizeof(struct ofp_group_stats) == 40); |
| 2067 | |
| 2068 | /* Body of reply to OFPMP_GROUP_DESC request. */ |
| 2069 | struct ofp_group_desc_stats { |
| 2070 | uint16_t length; /* Length of this entry. */ |
| 2071 | uint8_t type; /* One of OFPGT_*. */ |
| 2072 | uint8_t pad; /* Pad to 64 bits. */ |
| 2073 | uint32_t group_id; /* Group identifier. */ |
| 2074 | struct ofp_bucket buckets[0]; |
| 2075 | }; |
| 2076 | OFP_ASSERT(sizeof(struct ofp_group_desc_stats) == 8); |
| 2077 | |
| 2078 | /* Group configuration flags */ |
| 2079 | enum ofp_group_capabilities { |
| 2080 | OFPGFC_SELECT_WEIGHT = 1 << 0, /* Support weight for select groups */ |
| 2081 | OFPGFC_SELECT_LIVENESS = 1 << 1, /* Support liveness for select groups */ |
| 2082 | OFPGFC_CHAINING = 1 << 2, /* Support chaining groups */ |
| 2083 | OFPGFC_CHAINING_CHECKS = 1 << 3, /* Check chaining for loops and delete */ |
| 2084 | }; |
| 2085 | |
| 2086 | /* Body of reply to OFPMP_GROUP_FEATURES request. Group features. */ |
| 2087 | struct ofp_group_features { |
| 2088 | uint32_t types; /* Bitmap of OFPGT_* values supported. */ |
| 2089 | uint32_t capabilities; /* Bitmap of OFPGFC_* capability supported. */ |
| 2090 | uint32_t max_groups[4]; /* Maximum number of groups for each type. */ |
| 2091 | uint32_t actions[4]; /* Bitmaps of OFPAT_* that are supported. */ |
| 2092 | }; |
| 2093 | OFP_ASSERT(sizeof(struct ofp_group_features) == 40); |
| 2094 | |
| 2095 | /* Body of OFPMP_METER and OFPMP_METER_CONFIG requests. */ |
| 2096 | struct ofp_meter_multipart_request { |
| 2097 | uint32_t meter_id; /* Meter instance, or OFPM_ALL. */ |
| 2098 | uint8_t pad[4]; /* Align to 64 bits. */ |
| 2099 | }; |
| 2100 | OFP_ASSERT(sizeof(struct ofp_meter_multipart_request) == 8); |
| 2101 | |
| 2102 | /* Statistics for each meter band */ |
| 2103 | struct ofp_meter_band_stats { |
| 2104 | uint64_t packet_band_count; /* Number of packets in band. */ |
| 2105 | uint64_t byte_band_count; /* Number of bytes in band. */ |
| 2106 | }; |
| 2107 | OFP_ASSERT(sizeof(struct ofp_meter_band_stats) == 16); |
| 2108 | |
| 2109 | /* Body of reply to OFPMP_METER request. Meter statistics. */ |
| 2110 | struct ofp_meter_stats { |
| 2111 | uint32_t meter_id; /* Meter instance. */ |
| 2112 | uint16_t len; /* Length in bytes of this stats. */ |
| 2113 | uint8_t pad[6]; |
| 2114 | uint32_t flow_count; /* Number of flows bound to meter. */ |
| 2115 | uint64_t packet_in_count; /* Number of packets in input. */ |
| 2116 | uint64_t byte_in_count; /* Number of bytes in input. */ |
| 2117 | uint32_t duration_sec; /* Time meter has been alive in seconds. */ |
| 2118 | uint32_t duration_nsec; /* Time meter has been alive in nanoseconds beyond |
| 2119 | duration_sec. */ |
| 2120 | struct ofp_meter_band_stats band_stats[0]; /* The band_stats length is |
| 2121 | inferred from the length field. */ |
| 2122 | }; |
| 2123 | OFP_ASSERT(sizeof(struct ofp_meter_stats) == 40); |
| 2124 | |
| 2125 | /* Body of reply to OFPMP_METER_CONFIG request. Meter configuration. */ |
| 2126 | struct ofp_meter_config { |
| 2127 | uint16_t length; /* Length of this entry. */ |
| 2128 | uint16_t flags; /* All OFPMC_* that apply. */ |
| 2129 | uint32_t meter_id; /* Meter instance. */ |
| 2130 | struct ofp_meter_band_header bands[0]; /* The bands length is |
| 2131 | inferred from the length field. */ |
| 2132 | }; |
| 2133 | OFP_ASSERT(sizeof(struct ofp_meter_config) == 8); |
| 2134 | |
| 2135 | /* Body of reply to OFPMP_METER_FEATURES request. Meter features. */ |
| 2136 | struct ofp_meter_features { |
| 2137 | uint32_t max_meter; /* Maximum number of meters. */ |
| 2138 | uint32_t band_types; /* Bitmaps of OFPMBT_* values supported. */ |
| 2139 | uint32_t capabilities; /* Bitmaps of "ofp_meter_flags". */ |
| 2140 | uint8_t max_bands; /* Maximum bands per meters */ |
| 2141 | uint8_t max_color; /* Maximum color value */ |
| 2142 | uint8_t pad[2]; |
| 2143 | }; |
| 2144 | OFP_ASSERT(sizeof(struct ofp_meter_features) == 16); |
| 2145 | |
| 2146 | /* Body for ofp_multipart_request/reply of type OFPMP_EXPERIMENTER. */ |
| 2147 | struct ofp_experimenter_multipart_header { |
| 2148 | uint32_t experimenter; /* Experimenter ID which takes the same form |
| 2149 | as in struct ofp_experimenter_header. */ |
| 2150 | uint32_t exp_type; /* Experimenter defined. */ |
| 2151 | /* Experimenter-defined arbitrary additional data. */ |
| 2152 | }; |
| 2153 | OFP_ASSERT(sizeof(struct ofp_experimenter_multipart_header) == 8); |
| 2154 | |
| 2155 | /* Experimenter extension. */ |
| 2156 | struct ofp_experimenter_header { |
| 2157 | struct ofp_header header; /* Type OFPT_EXPERIMENTER. */ |
| 2158 | uint32_t experimenter; /* Experimenter ID: |
| 2159 | * - MSB 0: low-order bytes are IEEE OUI. |
| 2160 | * - MSB != 0: defined by ONF. */ |
| 2161 | uint32_t exp_type; /* Experimenter defined. */ |
| 2162 | /* Experimenter-defined arbitrary additional data. */ |
| 2163 | }; |
| 2164 | OFP_ASSERT(sizeof(struct ofp_experimenter_header) == 16); |
| 2165 | |
| 2166 | /* All ones is used to indicate all queues in a port (for stats retrieval). */ |
| 2167 | #define OFPQ_ALL 0xffffffff |
| 2168 | |
| 2169 | /* Min rate > 1000 means not configured. */ |
| 2170 | #define OFPQ_MIN_RATE_UNCFG 0xffff |
| 2171 | |
| 2172 | /* Max rate > 1000 means not configured. */ |
| 2173 | #define OFPQ_MAX_RATE_UNCFG 0xffff |
| 2174 | |
| 2175 | enum ofp_queue_properties { |
| 2176 | OFPQT_MIN_RATE = 1, /* Minimum datarate guaranteed. */ |
| 2177 | OFPQT_MAX_RATE = 2, /* Maximum datarate. */ |
| 2178 | OFPQT_EXPERIMENTER = 0xffff /* Experimenter defined property. */ |
| 2179 | }; |
| 2180 | |
| 2181 | /* Common description for a queue. */ |
| 2182 | struct ofp_queue_prop_header { |
| 2183 | uint16_t property; /* One of OFPQT_. */ |
| 2184 | uint16_t len; /* Length of property, including this header. */ |
| 2185 | uint8_t pad[4]; /* 64-bit alignemnt. */ |
| 2186 | }; |
| 2187 | OFP_ASSERT(sizeof(struct ofp_queue_prop_header) == 8); |
| 2188 | |
| 2189 | /* Min-Rate queue property description. */ |
| 2190 | struct ofp_queue_prop_min_rate { |
| 2191 | struct ofp_queue_prop_header prop_header; /* prop: OFPQT_MIN, len: 16. */ |
| 2192 | uint16_t rate; /* In 1/10 of a percent; >1000 -> disabled. */ |
| 2193 | uint8_t pad[6]; /* 64-bit alignment */ |
| 2194 | }; |
| 2195 | OFP_ASSERT(sizeof(struct ofp_queue_prop_min_rate) == 16); |
| 2196 | |
| 2197 | /* Max-Rate queue property description. */ |
| 2198 | struct ofp_queue_prop_max_rate { |
| 2199 | struct ofp_queue_prop_header prop_header; /* prop: OFPQT_MAX, len: 16. */ |
| 2200 | uint16_t rate; /* In 1/10 of a percent; >1000 -> disabled. */ |
| 2201 | uint8_t pad[6]; /* 64-bit alignment */ |
| 2202 | }; |
| 2203 | OFP_ASSERT(sizeof(struct ofp_queue_prop_max_rate) == 16); |
| 2204 | |
| 2205 | /* Experimenter queue property description. */ |
| 2206 | struct ofp_queue_prop_experimenter { |
| 2207 | struct ofp_queue_prop_header prop_header; /* prop: OFPQT_EXPERIMENTER, len: 16. */ |
| 2208 | uint32_t experimenter; /* Experimenter ID which takes the same |
| 2209 | form as in struct |
| 2210 | ofp_experimenter_header. */ |
| 2211 | uint8_t pad[4]; /* 64-bit alignment */ |
| 2212 | uint8_t data[0]; /* Experimenter defined data. */ |
| 2213 | }; |
| 2214 | OFP_ASSERT(sizeof(struct ofp_queue_prop_experimenter) == 16); |
| 2215 | |
| 2216 | /* Full description for a queue. */ |
| 2217 | struct ofp_packet_queue { |
| 2218 | uint32_t queue_id; /* id for the specific queue. */ |
| 2219 | uint32_t port; /* Port this queue is attached to. */ |
| 2220 | uint16_t len; /* Length in bytes of this queue desc. */ |
| 2221 | uint8_t pad[6]; /* 64-bit alignment. */ |
| 2222 | struct ofp_queue_prop_header properties[0]; /* List of properties. */ |
| 2223 | }; |
| 2224 | OFP_ASSERT(sizeof(struct ofp_packet_queue) == 16); |
| 2225 | |
| 2226 | /* Query for port queue configuration. */ |
| 2227 | struct ofp_queue_get_config_request { |
| 2228 | struct ofp_header header; |
| 2229 | uint32_t port; /* Port to be queried. Should refer |
| 2230 | to a valid physical port (i.e. < OFPP_MAX), |
| 2231 | or OFPP_ANY to request all configured |
| 2232 | queues.*/ |
| 2233 | uint8_t pad[4]; |
| 2234 | }; |
| 2235 | OFP_ASSERT(sizeof(struct ofp_queue_get_config_request) == 16); |
| 2236 | |
| 2237 | /* Queue configuration for a given port. */ |
| 2238 | struct ofp_queue_get_config_reply { |
| 2239 | struct ofp_header header; |
| 2240 | uint32_t port; |
| 2241 | uint8_t pad[4]; |
| 2242 | struct ofp_packet_queue queues[0]; /* List of configured queues. */ |
| 2243 | }; |
| 2244 | OFP_ASSERT(sizeof(struct ofp_queue_get_config_reply) == 16); |
| 2245 | |
| 2246 | /* OFPAT_SET_QUEUE action struct: send packets to given queue on port. */ |
| 2247 | struct ofp_action_set_queue { |
| 2248 | uint16_t type; /* OFPAT_SET_QUEUE. */ |
| 2249 | uint16_t len; /* Len is 8. */ |
| 2250 | uint32_t queue_id; /* Queue id for the packets. */ |
| 2251 | }; |
| 2252 | OFP_ASSERT(sizeof(struct ofp_action_set_queue) == 8); |
| 2253 | |
| 2254 | struct ofp_queue_stats_request { |
| 2255 | uint32_t port_no; /* All ports if OFPP_ANY. */ |
| 2256 | uint32_t queue_id; /* All queues if OFPQ_ALL. */ |
| 2257 | }; |
| 2258 | OFP_ASSERT(sizeof(struct ofp_queue_stats_request) == 8); |
| 2259 | |
| 2260 | struct ofp_queue_stats { |
| 2261 | uint32_t port_no; |
| 2262 | uint32_t queue_id; /* Queue i.d */ |
| 2263 | uint64_t tx_bytes; /* Number of transmitted bytes. */ |
| 2264 | uint64_t tx_packets; /* Number of transmitted packets. */ |
| 2265 | uint64_t tx_errors; /* Number of packets dropped due to overrun. */ |
| 2266 | uint32_t duration_sec; /* Time queue has been alive in seconds. */ |
| 2267 | uint32_t duration_nsec; /* Time queue has been alive in nanoseconds beyond |
| 2268 | duration_sec. */ |
| 2269 | }; |
| 2270 | OFP_ASSERT(sizeof(struct ofp_queue_stats) == 40); |
| 2271 | |
| 2272 | /* Configures the "role" of the sending controller. The default role is: |
| 2273 | * |
| 2274 | * - Equal (NX_ROLE_EQUAL), which allows the controller access to all |
| 2275 | * OpenFlow features. All controllers have equal responsibility. |
| 2276 | * |
| 2277 | * The other possible roles are a related pair: |
| 2278 | * |
| 2279 | * - Master (NX_ROLE_MASTER) is equivalent to Equal, except that there may |
| 2280 | * be at most one Master controller at a time: when a controller |
| 2281 | * configures itself as Master, any existing Master is demoted to the |
| 2282 | * Slave role. |
| 2283 | * |
| 2284 | * - Slave (NX_ROLE_SLAVE) allows the controller read-only access to |
| 2285 | * OpenFlow features. In particular attempts to modify the flow table |
| 2286 | * will be rejected with an OFPBRC_EPERM error. |
| 2287 | * |
| 2288 | * Slave controllers do not receive OFPT_PACKET_IN or OFPT_FLOW_REMOVED |
| 2289 | * messages, but they do receive OFPT_PORT_STATUS messages. |
| 2290 | */ |
| 2291 | |
| 2292 | /* Controller roles. */ |
| 2293 | enum ofp_controller_role { |
| 2294 | OFPCR_ROLE_NOCHANGE = 0, /* Don't change current role. */ |
| 2295 | OFPCR_ROLE_EQUAL = 1, /* Default role, full access. */ |
| 2296 | OFPCR_ROLE_MASTER = 2, /* Full access, at most one master. */ |
| 2297 | OFPCR_ROLE_SLAVE = 3, /* Read-only access. */ |
| 2298 | }; |
| 2299 | |
| 2300 | /* Role request and reply message. */ |
| 2301 | struct ofp_role_request { |
| 2302 | struct ofp_header header; /* Type OFPT_ROLE_REQUEST/OFPT_ROLE_REPLY. */ |
| 2303 | uint32_t role; /* One of NX_ROLE_*. */ |
| 2304 | uint8_t pad[4]; /* Align to 64 bits. */ |
| 2305 | uint64_t generation_id; /* Master Election Generation Id */ |
| 2306 | }; |
| 2307 | OFP_ASSERT(sizeof(struct ofp_role_request) == 24); |
| 2308 | |
| 2309 | /* Asynchronous message configuration. */ |
| 2310 | struct ofp_async_config { |
| 2311 | struct ofp_header header; /* OFPT_GET_ASYNC_REPLY or OFPT_SET_ASYNC. */ |
| 2312 | uint32_t packet_in_mask[2]; /* Bitmasks of OFPR_* values. */ |
| 2313 | uint32_t port_status_mask[2]; /* Bitmasks of OFPPR_* values. */ |
| 2314 | uint32_t flow_removed_mask[2];/* Bitmasks of OFPRR_* values. */ |
| 2315 | }; |
| 2316 | OFP_ASSERT(sizeof(struct ofp_async_config) == 32); |
| 2317 | |
| 2318 | #endif /* openflow/openflow.h */ |