blob: 5746e94e963a6311302c1b4950f30ead37490170 [file] [log] [blame]
# Copyright 2013, Big Switch Networks, Inc.
#
# LoxiGen is licensed under the Eclipse Public License, version 1.0 (EPL), with
# the following special exception:
#
# LOXI Exception
#
# As a special exception to the terms of the EPL, you may distribute libraries
# generated by LoxiGen (LoxiGen Libraries) under the terms of your choice, provided
# that copyright and licensing notices generated by LoxiGen are not altered or removed
# from the LoxiGen Libraries and the notice provided below is (i) included in
# the LoxiGen Libraries, if distributed in source code form and (ii) included in any
# documentation for the LoxiGen Libraries, if distributed in binary form.
#
# Notice: "Copyright 2013, Big Switch Networks, Inc. This library was generated by the LoxiGen Compiler."
#
# You may not use this file except in compliance with the EPL or LOXI Exception. You may obtain
# a copy of the EPL at:
#
# http://www.eclipse.org/legal/epl-v10.html
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# EPL for the specific language governing permissions and limitations
# under the EPL.
# Available targets: all, c, python, clean
# This Makefile is just for convenience. Users that need to pass additional
# options to loxigen.py are encouraged to run it directly.
# Where to put the generated code.
LOXI_OUTPUT_DIR = loxi_output
# Generated files depend on all Loxi code and input files
LOXI_PY_FILES=$(shell find . \( -name loxi_output -prune \
-o -name templates -prune \
-o -name tests -prune \
-o -name '*' \
\) -a -name '*.py')
LOXI_TEMPLATE_FILES=$(shell find */templates -type f -a \
\! \( -name '*.cache' -o -name '.*' \))
JAVA_PRE_WRITTEN_FILES=$(shell find java_gen/pre-written -type f)
INPUT_FILES = $(wildcard openflow_input/*)
TEST_DATA = $(shell find test_data -name '*.data')
OPENFLOWJ_OUTPUT_DIR = ${LOXI_OUTPUT_DIR}/openflowj
OPENFLOWJ_ECLIPSE_WORKSPACE = openflowj-loxi
all: c python java wireshark
c: .loxi_ts.c
.loxi_ts.c: ${LOXI_PY_FILES} ${LOXI_TEMPLATE_FILES} ${INPUT_FILES} ${TEST_DATA}
./loxigen.py --install-dir=${LOXI_OUTPUT_DIR} --lang=c --version-list=1.0,1.1,1.2,1.3,1.4
touch $@
python: .loxi_ts.python
.loxi_ts.python: ${LOXI_PY_FILES} ${LOXI_TEMPLATE_FILES} ${INPUT_FILES} ${TEST_DATA}
./loxigen.py --install-dir=${LOXI_OUTPUT_DIR} --lang=python
touch $@
python-doc: python
rm -rf ${LOXI_OUTPUT_DIR}/pyloxi-doc
mkdir -p ${LOXI_OUTPUT_DIR}/pyloxi-doc
cp -a py_gen/sphinx ${LOXI_OUTPUT_DIR}/pyloxi-doc/input
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi sphinx-apidoc -o ${LOXI_OUTPUT_DIR}/pyloxi-doc/input ${LOXI_OUTPUT_DIR}/pyloxi
sphinx-build ${LOXI_OUTPUT_DIR}/pyloxi-doc/input ${LOXI_OUTPUT_DIR}/pyloxi-doc
rm -rf ${LOXI_OUTPUT_DIR}/pyloxi-doc/input
@echo "HTML documentation output to ${LOXI_OUTPUT_DIR}/pyloxi-doc"
java: .loxi_ts.java
@rsync -rt java_gen/pre-written/ ${LOXI_OUTPUT_DIR}/openflowj/
@if [ -e ${OPENFLOWJ_ECLIPSE_WORKSPACE} ]; then \
rsync --checksum --delete -rv ${LOXI_OUTPUT_DIR}/openflowj/gen-src/ ${OPENFLOWJ_ECLIPSE_WORKSPACE}/gen-src; \
fi
.loxi_ts.java: ${LOXI_PY_FILES} ${LOXI_TEMPLATE_FILES} ${INPUT_FILES} ${TEST_DATA} ${JAVA_PRE_WRITTEN_FILES}
./loxigen.py --install-dir=${LOXI_OUTPUT_DIR} --lang=java
touch $@
eclipse-workspace:
mkdir -p ${OPENFLOWJ_ECLIPSE_WORKSPACE}
ln -sf ../java_gen/pre-written/pom.xml ${OPENFLOWJ_ECLIPSE_WORKSPACE}/pom.xml
ln -sf ../java_gen/pre-written/LICENSE.txt ${OPENFLOWJ_ECLIPSE_WORKSPACE}/LICENSE.txt
ln -sf ../java_gen/pre-written/src ${OPENFLOWJ_ECLIPSE_WORKSPACE}
rsync --checksum --delete -rv ${LOXI_OUTPUT_DIR}/openflowj/gen-src/ ${OPENFLOWJ_ECLIPSE_WORKSPACE}/gen-src
cd ${OPENFLOWJ_ECLIPSE_WORKSPACE} && mvn eclipse:eclipse
# Unfortunately, mvn eclipse:eclipse resolves the symlink, which doesn't work with eclipse
cd ${OPENFLOWJ_ECLIPSE_WORKSPACE} && perl -pi -e 's{<classpathentry kind="src" path="[^"]*/java_gen/pre-written/src/}{<classpathentry kind="src" path="src/}' .classpath
check-java: java
cd ${OPENFLOWJ_OUTPUT_DIR} && mvn compile test-compile test
package-java: java
cd ${OPENFLOWJ_OUTPUT_DIR} && mvn package
deploy-java: java
cd ${OPENFLOWJ_OUTPUT_DIR} && mvn deploy
install-java: java
cd ${OPENFLOWJ_OUTPUT_DIR} && mvn install
wireshark: .loxi_ts.wireshark
.loxi_ts.wireshark: ${LOXI_PY_FILES} ${LOXI_TEMPLATE_FILES} ${INPUT_FILES}
./loxigen.py --install-dir=${LOXI_OUTPUT_DIR} --lang=wireshark
touch $@
clean:
rm -rf loxi_output # only delete generated files in the default directory
rm -f loxigen.log loxigen-test.log .loxi_ts.*
debug:
@echo "LOXI_OUTPUT_DIR=\"${LOXI_OUTPUT_DIR}\""
@echo
@echo "LOXI_PY_FILES=\"${LOXI_PY_FILES}\""
@echo
@echo "LOXI_TEMPLATE_FILES=\"${LOXI_TEMPLATE_FILES}\""
@echo
@echo "INPUT_FILES=\"${INPUT_FILES}\""
check-all: check check-c check-py check-java
check:
nosetests
check-py: python
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi:. python py_gen/tests/generic_util.py
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi:. python py_gen/tests/of10.py
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi:. python py_gen/tests/of11.py
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi:. python py_gen/tests/of12.py
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi:. python py_gen/tests/of13.py
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi:. python py_gen/tests/of14.py
PYTHONPATH=${LOXI_OUTPUT_DIR}/pyloxi:. python py_gen/tests/of15.py
check-c: c
make -j4 -C ${LOXI_OUTPUT_DIR}/locitest
${LOXI_OUTPUT_DIR}/locitest/locitest
pylint:
pylint -E ${LOXI_PY_FILES}
ctags:
ctags ${LOXI_PY_FILES} ${LOXI_TEMPLATE_FILES} ${INPUT_FILES} ${TEST_DATA}
coverage:
find -name '*,cover' -exec rm {} \;
coverage erase
coverage run -a ./loxigen.py --lang=c
coverage run -a ./loxigen.py --lang=python
coverage run -a ./loxigen.py --lang=java
coverage run -a ./loxigen.py --lang=wireshark
coverage annotate -i --omit tenjin.py,pyparsing.py
.PHONY: all clean debug check pylint c python coverage