| # Copyright 2013, Big Switch Networks, Inc. |
| # |
| # LoxiGen is licensed under the Eclipse Public License, version 1.0 (EPL), with |
| # the following special exception: |
| # |
| # LOXI Exception |
| # |
| # As a special exception to the terms of the EPL, you may distribute libraries |
| # generated by LoxiGen (LoxiGen Libraries) under the terms of your choice, provided |
| # that copyright and licensing notices generated by LoxiGen are not altered or removed |
| # from the LoxiGen Libraries and the notice provided below is (i) included in |
| # the LoxiGen Libraries, if distributed in source code form and (ii) included in any |
| # documentation for the LoxiGen Libraries, if distributed in binary form. |
| # |
| # Notice: "Copyright 2013, Big Switch Networks, Inc. This library was generated by the LoxiGen Compiler." |
| # |
| # You may not use this file except in compliance with the EPL or LOXI Exception. You may obtain |
| # a copy of the EPL at: |
| # |
| # http://www.eclipse.org/legal/epl-v10.html |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # EPL for the specific language governing permissions and limitations |
| # under the EPL. |
| |
| ## |
| # @brief C code generation for LOXI type related maps |
| # |
| |
| import of_g |
| import sys |
| from generic_utils import * |
| import loxi_front_end.type_maps as type_maps |
| |
| |
| # Some number larger than small type values, but less then |
| # reserved values like 0xffff |
| max_type_value = 1000 |
| |
| def gen_object_id_to_type(out): |
| out.write(""" |
| /** |
| * Map from object ID to primary wire type |
| * |
| * For messages, this is the header type; in particular for stats, this is |
| * the common stats request/response type. For per-stats types, use the |
| * stats type map. For things like actions, instructions or queue-props, |
| * this gives the "sub type". |
| */ |
| """) |
| for version in of_g.of_version_range: |
| out.write("static const int\nof_object_to_type_map_v%d[OF_OBJECT_COUNT] = {\n" |
| %version) |
| out.write(" -1, /* of_object, not a valid specific type */\n") |
| for j, cls in enumerate(of_g.all_class_order): |
| comma = "" |
| if j < len(of_g.all_class_order) - 1: # Avoid ultimate comma |
| comma = "," |
| |
| if cls in type_maps.stats_reply_list: |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_stats_reply", version)], |
| comma, cls)) |
| elif cls in type_maps.stats_request_list: |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_stats_request", version)], |
| comma, cls)) |
| elif cls in type_maps.error_msg_list: |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_error_msg", version)], |
| comma, cls)) |
| elif cls in type_maps.flow_mod_list: |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_flow_mod", version)], |
| comma, cls)) |
| elif (cls, version) in type_maps.type_val and \ |
| type_maps.type_val[(cls, version)] != type_maps.invalid_type: |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[(cls, version)], comma, cls)) |
| elif type_maps.message_is_extension(cls, version): |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_experimenter", version)], |
| comma, cls)) |
| elif type_maps.action_is_extension(cls, version): |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_action_experimenter", |
| version)], |
| comma, cls)) |
| elif type_maps.action_id_is_extension(cls, version): |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_action_id_experimenter", |
| version)], |
| comma, cls)) |
| elif type_maps.instruction_is_extension(cls, version): |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_instruction_experimenter", |
| version)], |
| comma, cls)) |
| elif type_maps.queue_prop_is_extension(cls, version): |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_queue_prop_experimenter", |
| version)], |
| comma, cls)) |
| elif type_maps.table_feature_prop_is_extension(cls, version): |
| out.write(" %d%s /* %s */\n" % |
| (type_maps.type_val[("of_table_feature_prop_experimenter", |
| version)], |
| comma, cls)) |
| else: |
| out.write(" -1%s /* %s (invalid) */\n" % (comma, cls)) |
| out.write("};\n\n") |
| |
| out.write(""" |
| /** |
| * Unified map, indexed by wire version which is 1-based. |
| */ |
| const int *const of_object_to_type_map[OF_VERSION_ARRAY_MAX] = { |
| NULL, |
| """) |
| for version in of_g.of_version_range: |
| out.write(" of_object_to_type_map_v%d,\n" % version) |
| out.write(""" |
| }; |
| """) |
| |
| def gen_object_id_to_extension_data(out): |
| out.write(""" |
| /** |
| * Extension data. |
| * @fixme There must be a better way to represent this data |
| */ |
| """) |
| for version in of_g.of_version_range: |
| out.write(""" |
| static const of_experimenter_data_t |
| of_object_to_extension_data_v%d[OF_OBJECT_COUNT] = { |
| """ % version) |
| out.write(" {0, 0, 0}, /* of_object, not a valid specific type */\n") |
| for j, cls in enumerate(of_g.all_class_order): |
| comma = "" |
| if j < len(of_g.all_class_order) - 1: # Avoid ultimate comma |
| comma = "," |
| |
| if type_maps.class_is_extension(cls, version): |
| exp_name = type_maps.extension_to_experimenter_macro_name(cls) |
| subtype = type_maps.extension_to_subtype(cls, version) |
| out.write(" {1, %s, %d}%s /* %s */\n" % |
| (exp_name, subtype, comma, cls)) |
| else: |
| out.write(" {0, 0, 0}%s /* %s (non-extension) */\n" % |
| (comma, cls)) |
| out.write("};\n\n") |
| |
| out.write(""" |
| /** |
| * Unified map, indexed by wire version which is 1-based. |
| */ |
| const of_experimenter_data_t *const of_object_to_extension_data[OF_VERSION_ARRAY_MAX] = { |
| NULL, |
| """) |
| for version in of_g.of_version_range: |
| out.write(" of_object_to_extension_data_v%d,\n" % version) |
| out.write(""" |
| }; |
| """) |
| |
| def gen_type_to_object_id(out, type_str, prefix, template, |
| value_array, max_val): |
| """ |
| Generate C maps from various message class groups to object ids |
| |
| For each version, create an array mapping the type info to the |
| object ID. Then define an array containing those pointers. |
| """ |
| |
| # Create unified arrays and get length |
| arr_len = type_maps.type_array_len(value_array, max_val) |
| all_ars = [] |
| for version, val_dict in value_array.items(): # Per version dict |
| ar = type_maps.dict_to_array(val_dict, max_val, type_maps.invalid_type) |
| all_ars.append(ar) |
| |
| len_name = "%s_ITEM_COUNT" % prefix |
| |
| for i, ar in enumerate(all_ars): |
| version = i + 1 |
| out.write("static const of_object_id_t\nof_%s_v%d[%s] = {\n" % |
| (type_str, version, len_name)) |
| for i in range(arr_len): |
| comma = "" |
| if i < arr_len - 1: # Avoid ultimate comma |
| comma = "," |
| |
| # Per-version length check |
| if i < len(ar): |
| v = ar[i] |
| else: |
| v = type_maps.invalid_type |
| |
| if v == type_maps.invalid_type: |
| out.write(" %-30s /* %d (Invalid) */\n" % |
| ("OF_OBJECT_INVALID" + comma, i)) |
| else: |
| name = (template % v.upper()) + comma |
| out.write(" %-30s /* %d */\n" % (name, i)) |
| out.write("};\n") |
| |
| out.write(""" |
| /** |
| * Maps from %(c_name)s wire type values to LOCI object ids |
| * |
| * Indexed by wire version which is 1-based. |
| */ |
| |
| const of_object_id_t *const of_%(name)s[OF_VERSION_ARRAY_MAX] = { |
| NULL, |
| """ % dict(name=type_str, c_name=prefix.lower())) |
| for version in of_g.of_version_range: |
| out.write(" of_%(name)s_v%(version)d,\n" % dict(name=type_str, |
| version=version)) |
| out.write(""" |
| }; |
| |
| """ % dict(name=type_str, u_name=type_str.upper(), |
| max_val=max_val, c_name=prefix.lower())) |
| |
| def gen_type_maps(out): |
| """ |
| Generate various type maps |
| @param out The file handle to write to |
| """ |
| |
| out.write("#include <loci/loci.h>\n\n") |
| |
| # Generate maps from wire type values to object IDs |
| gen_type_to_object_id(out, "error_msg_type_to_id", "OF_ERROR_MSG", |
| "OF_%s_ERROR_MSG", type_maps.error_types, |
| max_type_value) |
| gen_type_to_object_id(out, "action_type_to_id", "OF_ACTION", |
| "OF_ACTION_%s", type_maps.action_types, |
| max_type_value) |
| gen_type_to_object_id(out, "action_id_type_to_id", "OF_ACTION_ID", |
| "OF_ACTION_ID_%s", type_maps.action_id_types, |
| max_type_value) |
| gen_type_to_object_id(out, "instruction_type_to_id", "OF_INSTRUCTION", |
| "OF_INSTRUCTION_%s", type_maps.instruction_types, |
| max_type_value) |
| gen_type_to_object_id(out, "queue_prop_type_to_id", "OF_QUEUE_PROP", |
| "OF_QUEUE_PROP_%s", type_maps.queue_prop_types, |
| max_type_value) |
| gen_type_to_object_id(out, "table_feature_prop_type_to_id", |
| "OF_TABLE_FEATURE_PROP", |
| "OF_TABLE_FEATURE_PROP_%s", |
| type_maps.table_feature_prop_types, |
| max_type_value) |
| gen_type_to_object_id(out, "meter_band_type_to_id", "OF_METER_BAND", |
| "OF_METER_BAND_%s", type_maps.meter_band_types, |
| max_type_value) |
| gen_type_to_object_id(out, "hello_elem_type_to_id", "OF_HELLO_ELEM", |
| "OF_HELLO_ELEM_%s", type_maps.hello_elem_types, |
| max_type_value) |
| |
| # FIXME: Multipart re-organization |
| gen_type_to_object_id(out, "stats_request_type_to_id", "OF_STATS_REQUEST", |
| "OF_%s_STATS_REQUEST", type_maps.stats_types, |
| max_type_value) |
| gen_type_to_object_id(out, "stats_reply_type_to_id", "OF_STATS_REPLY", |
| "OF_%s_STATS_REPLY", type_maps.stats_types, |
| max_type_value) |
| gen_type_to_object_id(out, "flow_mod_type_to_id", "OF_FLOW_MOD", |
| "OF_FLOW_%s", type_maps.flow_mod_types, |
| max_type_value) |
| gen_type_to_object_id(out, "oxm_type_to_id", "OF_OXM", |
| "OF_OXM_%s", type_maps.oxm_types, max_type_value) |
| gen_type_to_object_id(out, "message_type_to_id", "OF_MESSAGE", |
| "OF_%s", type_maps.message_types, max_type_value) |
| |
| gen_object_id_to_type(out) |
| gen_object_id_to_extension_data(out) |
| # Don't need array mapping ID to stats types right now; handled directly |
| # gen_object_id_to_stats_type(out) |
| |
| |
| def gen_type_to_obj_map_functions(out): |
| """ |
| Generate the templated static inline type map functions |
| @param out The file handle to write to |
| """ |
| |
| ################################################################ |
| # Generate all type-to-object-ID maps in a common way |
| ################################################################ |
| map_template = """ |
| /** |
| * %(name)s wire type to object ID array. |
| * Treat as private; use function accessor below |
| */ |
| |
| extern const of_object_id_t *const of_%(name)s_type_to_id[OF_VERSION_ARRAY_MAX]; |
| |
| #define OF_%(u_name)s_ITEM_COUNT %(ar_len)d\n |
| |
| /** |
| * Map an %(name)s wire value to an OF object |
| * @param %(name)s The %(name)s type wire value |
| * @param version The version associated with the check |
| * @return The %(name)s OF object type |
| * @return OF_OBJECT_INVALID if type does not map to an object |
| * |
| */ |
| static inline of_object_id_t |
| of_%(name)s_to_object_id(int %(name)s, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return OF_OBJECT_INVALID; |
| } |
| if (%(name)s < 0 || %(name)s >= OF_%(u_name)s_ITEM_COUNT) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| return of_%(name)s_type_to_id[version][%(name)s]; |
| } |
| """ |
| map_with_experimenter_template = """ |
| /** |
| * %(name)s wire type to object ID array. |
| * Treat as private; use function accessor below |
| */ |
| |
| extern const of_object_id_t *const of_%(name)s_type_to_id[OF_VERSION_ARRAY_MAX]; |
| |
| #define OF_%(u_name)s_ITEM_COUNT %(ar_len)d\n |
| |
| /** |
| * Map an %(name)s wire value to an OF object |
| * @param %(name)s The %(name)s type wire value |
| * @param version The version associated with the check |
| * @return The %(name)s OF object type |
| * @return OF_OBJECT_INVALID if type does not map to an object |
| * |
| */ |
| static inline of_object_id_t |
| of_%(name)s_to_object_id(int %(name)s, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return OF_OBJECT_INVALID; |
| } |
| if (%(name)s == OF_EXPERIMENTER_TYPE) { |
| return OF_%(u_name)s_EXPERIMENTER; |
| } |
| if (%(name)s < 0 || %(name)s >= OF_%(u_name)s_ITEM_COUNT) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| return of_%(name)s_type_to_id[version][%(name)s]; |
| } |
| """ |
| |
| stats_template = """ |
| /** |
| * %(name)s wire type to object ID array. |
| * Treat as private; use function accessor below |
| */ |
| |
| extern const of_object_id_t *const of_%(name)s_type_to_id[OF_VERSION_ARRAY_MAX]; |
| |
| #define OF_%(u_name)s_ITEM_COUNT %(ar_len)d\n |
| |
| /** |
| * Map an %(name)s wire value to an OF object |
| * @param %(name)s The %(name)s type wire value |
| * @param version The version associated with the check |
| * @return The %(name)s OF object type |
| * @return OF_OBJECT_INVALID if type does not map to an object |
| * |
| */ |
| static inline of_object_id_t |
| of_%(name)s_to_object_id(int %(name)s, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return OF_OBJECT_INVALID; |
| } |
| if (%(name)s == OF_EXPERIMENTER_TYPE) { |
| return OF_EXPERIMENTER_%(u_name)s; |
| } |
| if (%(name)s < 0 || %(name)s >= OF_%(u_name)s_ITEM_COUNT) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| return of_%(name)s_type_to_id[version][%(name)s]; |
| } |
| """ |
| |
| error_msg_template = """ |
| /** |
| * %(name)s wire type to object ID array. |
| * Treat as private; use function accessor below |
| */ |
| |
| extern const of_object_id_t *const of_%(name)s_type_to_id[OF_VERSION_ARRAY_MAX]; |
| |
| #define OF_%(u_name)s_ITEM_COUNT %(ar_len)d\n |
| |
| /** |
| * Map an %(name)s wire value to an OF object |
| * @param %(name)s The %(name)s type wire value |
| * @param version The version associated with the check |
| * @return The %(name)s OF object type |
| * @return OF_OBJECT_INVALID if type does not map to an object |
| * |
| */ |
| static inline of_object_id_t |
| of_error_msg_to_object_id(uint16_t %(name)s, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return OF_OBJECT_INVALID; |
| } |
| if (%(name)s == OF_EXPERIMENTER_TYPE) { |
| return OF_EXPERIMENTER_ERROR_MSG; |
| } |
| if (%(name)s < 0 || %(name)s >= OF_%(u_name)s_ITEM_COUNT) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| return of_%(name)s_type_to_id[version][%(name)s]; |
| } |
| """ |
| |
| # Experimenter mapping functions |
| # Currently we support very few candidates, so we just do a |
| # list of if/elses |
| experimenter_function = """ |
| /** |
| * @brief Map a message known to be an exp msg to the proper object |
| * |
| * Assume that the message is a vendor/experimenter message. Determine |
| * the specific object type for the message. |
| * @param msg An OF message object (uint8_t *) |
| * @param length The number of bytes in the message (for error checking) |
| * @param version Version of message |
| * @returns object ID of specific type if recognized or OF_EXPERIMENTER if not |
| * |
| * @todo put OF_EXPERIMENTER_<name> in loci_base.h |
| */ |
| |
| static inline of_object_id_t |
| of_message_experimenter_to_object_id(of_message_t msg, of_version_t version) { |
| uint32_t experimenter_id; |
| uint32_t subtype; |
| |
| /* Extract experimenter and subtype value; look for match from type maps */ |
| experimenter_id = of_message_experimenter_id_get(msg); |
| subtype = of_message_experimenter_subtype_get(msg); |
| |
| /* Do a simple if/else search for the ver, experimenter and subtype */ |
| """ |
| first = True |
| for version, experimenter_lists in type_maps.extension_message_subtype.items(): |
| for exp, subtypes in experimenter_lists.items(): |
| experimenter_function += """ |
| if ((experimenter_id == OF_EXPERIMENTER_ID_%(exp_name)s) && |
| (version == %(ver_name)s)) { |
| """ % dict(exp_name=exp.upper(), ver_name=of_g.wire_ver_map[version]) |
| for ext_msg, subtype in subtypes.items(): |
| experimenter_function += """ |
| if (subtype == %(subtype)s) { |
| return %(ext_msg)s; |
| } |
| """ % dict(subtype=subtype, ext_msg=ext_msg.upper()) |
| experimenter_function += """ |
| } |
| """ |
| experimenter_function += """ |
| return OF_EXPERIMENTER; |
| } |
| """ |
| |
| # Message need different handling |
| msg_template = """ |
| /** |
| * %(name)s wire type to object ID array. |
| * Treat as private; use function accessor below |
| */ |
| |
| extern const of_object_id_t *const of_%(name)s_type_to_id[OF_VERSION_ARRAY_MAX]; |
| |
| #define OF_%(u_name)s_ITEM_COUNT %(ar_len)d\n |
| |
| /** |
| * Extract the type info from the message and determine its object type |
| * @param msg An OF message object (uint8_t *) |
| * @param length The number of bytes in the message (for error checking) |
| * @returns object ID or OF_OBJECT_INVALID if parse error |
| */ |
| |
| static inline of_object_id_t |
| of_message_to_object_id(of_message_t msg, int length) { |
| uint8_t type; |
| of_version_t ver; |
| of_object_id_t obj_id; |
| uint16_t stats_type; |
| uint16_t err_type; |
| uint8_t flow_mod_cmd; |
| |
| if (length < OF_MESSAGE_MIN_LENGTH) { |
| return OF_OBJECT_INVALID; |
| } |
| type = of_message_type_get(msg); |
| ver = of_message_version_get(msg); |
| if (!OF_VERSION_OKAY(ver)) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| if (type >= OF_MESSAGE_ITEM_COUNT) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| obj_id = of_message_type_to_id[ver][type]; |
| |
| /* Remap to specific message if known */ |
| if (obj_id == OF_EXPERIMENTER) { |
| if (length < OF_MESSAGE_EXPERIMENTER_MIN_LENGTH) { |
| return OF_OBJECT_INVALID; |
| } |
| return of_message_experimenter_to_object_id(msg, ver); |
| } |
| |
| /* Remap to add/delete/strict version */ |
| if (obj_id == OF_FLOW_MOD) { |
| if (length < OF_MESSAGE_MIN_FLOW_MOD_LENGTH(ver)) { |
| return OF_OBJECT_INVALID; |
| } |
| flow_mod_cmd = of_message_flow_mod_command_get(msg, ver); |
| obj_id = of_flow_mod_to_object_id(flow_mod_cmd, ver); |
| } |
| |
| if ((obj_id == OF_STATS_REQUEST) || (obj_id == OF_STATS_REPLY)) { |
| if (length < OF_MESSAGE_MIN_STATS_LENGTH) { |
| return OF_OBJECT_INVALID; |
| } |
| stats_type = of_message_stats_type_get(msg); |
| if (obj_id == OF_STATS_REQUEST) { |
| obj_id = of_stats_request_to_object_id(stats_type, ver); |
| } else { |
| obj_id = of_stats_reply_to_object_id(stats_type, ver); |
| } |
| } |
| |
| if (obj_id == OF_ERROR_MSG) { |
| if (length < OF_MESSAGE_MIN_ERROR_LENGTH) { |
| return OF_OBJECT_INVALID; |
| } |
| err_type = of_message_error_type_get(msg); |
| obj_id = of_error_msg_to_object_id(err_type, ver); |
| } |
| |
| return obj_id; |
| } |
| """ |
| |
| oxm_template = """ |
| /** |
| * oxm wire type to object ID array. |
| * Treat as private; use function accessor below |
| */ |
| |
| extern const of_object_id_t *const of_oxm_type_to_id[OF_VERSION_ARRAY_MAX]; |
| |
| #define OF_OXM_ITEM_COUNT %(ar_len)d\n |
| |
| /** |
| * Map an oxm wire value to an OF object |
| * @param oxm The oxm type wire value |
| * @param version The version associated with the check |
| * @return The oxm OF object type |
| * @return OF_OBJECT_INVALID if type does not map to an object |
| * |
| */ |
| static inline of_object_id_t |
| of_oxm_to_object_id(uint32_t type_len, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| uint16_t class = (type_len >> 16) & 0xffff; |
| uint8_t masked_type = (type_len >> 8) & 0xff; |
| |
| if (class == 0x8000) { |
| if (masked_type < 0 || masked_type >= OF_OXM_ITEM_COUNT) { |
| return OF_OBJECT_INVALID; |
| } |
| |
| return of_oxm_type_to_id[version][masked_type]; |
| } else if (class == 0x0003) { |
| switch (masked_type) { |
| case 0x00: return OF_OXM_BSN_IN_PORTS_128; |
| case 0x01: return OF_OXM_BSN_IN_PORTS_128_MASKED; |
| case 0x02: return OF_OXM_BSN_LAG_ID; |
| case 0x03: return OF_OXM_BSN_LAG_ID_MASKED; |
| default: return OF_OBJECT_INVALID; |
| } |
| } else { |
| return OF_OBJECT_INVALID; |
| } |
| } |
| """ |
| |
| # Action types array gen |
| ar_len = type_maps.type_array_len(type_maps.action_types, max_type_value) |
| out.write(map_with_experimenter_template % |
| dict(name="action", u_name="ACTION", ar_len=ar_len)) |
| |
| # Action ID types array gen |
| ar_len = type_maps.type_array_len(type_maps.action_id_types, max_type_value) |
| out.write(map_with_experimenter_template % |
| dict(name="action_id", u_name="ACTION_ID", ar_len=ar_len)) |
| |
| # Instruction types array gen |
| ar_len = type_maps.type_array_len(type_maps.instruction_types, |
| max_type_value) |
| out.write(map_with_experimenter_template % |
| dict(name="instruction", u_name="INSTRUCTION", ar_len=ar_len)) |
| |
| # Queue prop types array gen |
| ar_len = type_maps.type_array_len(type_maps.queue_prop_types, |
| max_type_value) |
| out.write(map_with_experimenter_template % |
| dict(name="queue_prop", u_name="QUEUE_PROP", ar_len=ar_len)) |
| |
| # Table feature prop types array gen |
| ar_len = type_maps.type_array_len(type_maps.table_feature_prop_types, |
| max_type_value) |
| out.write(map_with_experimenter_template % |
| dict(name="table_feature_prop", u_name="TABLE_FEATURE_PROP", |
| ar_len=ar_len)) |
| |
| # Meter band types array gen |
| ar_len = type_maps.type_array_len(type_maps.meter_band_types, |
| max_type_value) |
| out.write(map_with_experimenter_template % |
| dict(name="meter_band", u_name="METER_BAND", ar_len=ar_len)) |
| |
| # Hello elem types array gen |
| ar_len = type_maps.type_array_len(type_maps.hello_elem_types, |
| max_type_value) |
| out.write(map_template % |
| dict(name="hello_elem", u_name="HELLO_ELEM", ar_len=ar_len)) |
| |
| # Stats types array gen |
| ar_len = type_maps.type_array_len(type_maps.stats_types, |
| max_type_value) |
| out.write(stats_template % |
| dict(name="stats_reply", u_name="STATS_REPLY", ar_len=ar_len)) |
| out.write(stats_template % |
| dict(name="stats_request", u_name="STATS_REQUEST", |
| ar_len=ar_len)) |
| |
| ar_len = type_maps.type_array_len(type_maps.error_types, |
| max_type_value) |
| out.write(error_msg_template % |
| dict(name="error_msg", u_name="ERROR_MSG", ar_len=ar_len)) |
| # out.write(error_msg_function) |
| |
| ar_len = type_maps.type_array_len(type_maps.flow_mod_types, max_type_value) |
| out.write(map_template % |
| dict(name="flow_mod", u_name="FLOW_MOD", ar_len=ar_len)) |
| |
| # OXM |
| ar_len = type_maps.type_array_len(type_maps.oxm_types, max_type_value) |
| out.write(""" |
| /* NOTE: We could optimize the OXM and only generate OF 1.2 versions. */ |
| """) |
| out.write(oxm_template % dict(ar_len=ar_len)) |
| |
| # Messages |
| out.write(experimenter_function) |
| # Must follow stats reply/request |
| ar_len = type_maps.type_array_len(type_maps.message_types, max_type_value) |
| out.write(msg_template % |
| dict(name="message", u_name="MESSAGE", ar_len=ar_len)) |
| |
| def gen_obj_to_type_map_functions(out): |
| """ |
| Generate the static line maps from object IDs to types |
| @param out The file handle to write to |
| """ |
| |
| ################################################################ |
| # Generate object ID to primary type map |
| ################################################################ |
| |
| out.write(""" |
| extern const int *const of_object_to_type_map[OF_VERSION_ARRAY_MAX]; |
| |
| /** |
| * Map an object ID to its primary wire type value |
| * @param id An object ID |
| * @return For message objects, the type value in the OpenFlow header |
| * @return For non-message objects such as actions, instructions, OXMs |
| * returns the type value that appears in the respective sub-header |
| * @return -1 For improper version or out of bounds input |
| * |
| * NOTE that for stats request/reply, returns the header type, not the |
| * sub-type |
| * |
| * Also, note that the value is returned as a signed integer. So -1 is |
| * an error code, while 0xffff is the usual "experimenter" code. |
| */ |
| static inline int |
| of_object_to_wire_type(of_object_id_t id, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return -1; |
| } |
| if (id < 0 || id >= OF_OBJECT_COUNT) { |
| return -1; |
| } |
| return of_object_to_type_map[version][id]; |
| } |
| |
| """) |
| |
| # Now for experimenter ids |
| out.write(""" |
| /** |
| * Map from object ID to a triple, (is_extension, experimenter id, subtype) |
| */ |
| """) |
| out.write(""" |
| typedef struct of_experimenter_data_s { |
| int is_extension; /* Boolean indication that this is an extension */ |
| uint32_t experimenter_id; |
| uint32_t subtype; |
| } of_experimenter_data_t; |
| |
| """) |
| |
| out.write(""" |
| extern const of_experimenter_data_t *const of_object_to_extension_data[OF_VERSION_ARRAY_MAX]; |
| |
| /** |
| * Map from the object ID of an extension to the experimenter ID |
| */ |
| static inline uint32_t |
| of_extension_to_experimenter_id(of_object_id_t obj_id, of_version_t ver) |
| { |
| if (obj_id < 0 || obj_id > OF_OBJECT_COUNT) { |
| return (uint32_t) -1; |
| } |
| /* @fixme: Verify ver? */ |
| return of_object_to_extension_data[ver][obj_id].experimenter_id; |
| } |
| |
| /** |
| * Map from the object ID of an extension to the experimenter subtype |
| */ |
| static inline uint32_t |
| of_extension_to_experimenter_subtype(of_object_id_t obj_id, of_version_t ver) |
| { |
| if (obj_id < 0 || obj_id > OF_OBJECT_COUNT) { |
| return (uint32_t) -1; |
| } |
| /* @fixme: Verify ver? */ |
| return of_object_to_extension_data[ver][obj_id].subtype; |
| } |
| |
| /** |
| * Boolean function indicating the the given object ID/version |
| * is recognized as a supported (decode-able) extension. |
| */ |
| static inline int |
| of_object_id_is_extension(of_object_id_t obj_id, of_version_t ver) |
| { |
| if (obj_id < 0 || obj_id > OF_OBJECT_COUNT) { |
| return (uint32_t) -1; |
| } |
| /* @fixme: Verify ver? */ |
| return of_object_to_extension_data[ver][obj_id].is_extension; |
| } |
| """) |
| |
| ################################################################ |
| # Generate object ID to the stats sub-type map |
| ################################################################ |
| |
| out.write(""" |
| /** |
| * Map an object ID to a stats type |
| * @param id An object ID |
| * @return The wire value for the stats type |
| * @return -1 if not supported for this version |
| * @return -1 if id is not a specific stats type ID |
| * |
| * Note that the value is returned as a signed integer. So -1 is |
| * an error code, while 0xffff is the usual "experimenter" code. |
| */ |
| |
| static inline int |
| of_object_to_stats_type(of_object_id_t id, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return -1; |
| } |
| switch (id) { |
| """) |
| # Assumes 1.2 contains all stats types and type values are |
| # the same across all versions |
| stats_names = dict() |
| for ver in of_g.of_version_range: |
| for name, value in type_maps.stats_types[ver].items(): |
| if name in stats_names and (not value == stats_names[name]): |
| print "ERROR stats type differ violating assumption" |
| sys.exit(1) |
| stats_names[name] = value |
| |
| for name, value in stats_names.items(): |
| out.write(" case OF_%s_STATS_REPLY:\n" % name.upper()) |
| out.write(" case OF_%s_STATS_REQUEST:\n" % name.upper()) |
| for version in of_g.of_version_range: |
| if not name in type_maps.stats_types[version]: |
| out.write(" if (version == %s) break;\n" % |
| of_g.of_version_wire2name[version]) |
| out.write(" return %d;\n" % value) |
| out.write(""" |
| default: |
| break; |
| } |
| return -1; /* Not recognized as stats type object for this version */ |
| } |
| """) |
| |
| ################################################################ |
| # Generate object ID to the error sub-type map |
| ################################################################ |
| out.write(""" |
| /** |
| * Map an object ID to an error type |
| * @param id An object ID |
| * @return The wire value for the error type |
| * @return -1 if not supported for this version |
| * @return -1 if id is not a specific error type ID |
| * |
| * Note that the value is returned as a signed integer. So -1 is |
| * an error code, while 0xffff is the usual "experimenter" code. |
| */ |
| |
| static inline int |
| of_object_to_error_type(of_object_id_t id, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return -1; |
| } |
| switch (id) {""") |
| error_names = set() |
| for ver in of_g.of_version_range: |
| for name in type_maps.error_types[ver]: |
| error_names.add(name) |
| for name in error_names: |
| out.write(""" |
| case OF_%(name)s_ERROR_MSG: |
| if (OF_ERROR_TYPE_%(name)s_SUPPORTED(version)) |
| return OF_ERROR_TYPE_%(name)s_BY_VERSION(version); |
| break;""" % {"name": name.upper()}) |
| out.write(""" |
| default: |
| break; |
| } |
| return -1; /* Not recognized as error type object for this version */ |
| } |
| """) |
| |
| ################################################################ |
| # Generate object ID to the flow mod sub-type map |
| ################################################################ |
| |
| out.write(""" |
| /** |
| * Map an object ID to a flow-mod command value |
| * @param id An object ID |
| * @return The wire value for the flow-mod command |
| * @return -1 if not supported for this version |
| * @return -1 if id is not a specific stats type ID |
| * |
| * Note that the value is returned as a signed integer. So -1 is |
| * an error code, while 0xffff is the usual "experimenter" code. |
| */ |
| |
| static inline int |
| of_object_to_flow_mod_command(of_object_id_t id, of_version_t version) |
| { |
| if (!OF_VERSION_OKAY(version)) { |
| return -1; |
| } |
| switch (id) { |
| """) |
| # Assumes 1.2 contains all stats types and type values are |
| # the same across all versions |
| flow_mod_names = dict() |
| for ver in of_g.of_version_range: |
| for name, value in type_maps.flow_mod_types[ver].items(): |
| if name in flow_mod_names and \ |
| (not value == flow_mod_names[name]): |
| print "ERROR flow mod command differ violating assumption" |
| sys.exit(1) |
| flow_mod_names[name] = value |
| |
| for name, value in flow_mod_names.items(): |
| out.write(" case OF_FLOW_%s:\n" % name.upper()) |
| for version in of_g.of_version_range: |
| if not name in type_maps.flow_mod_types[version]: |
| out.write(" if (version == %s) break;\n" % |
| of_g.of_version_wire2name[version]) |
| out.write(" return %d;\n" % value) |
| out.write(""" |
| default: |
| break; |
| } |
| return -1; /* Not recognized as flow mod type object for this version */ |
| } |
| |
| """) |
| |
| def gen_type_maps_header(out): |
| """ |
| Generate various header file declarations for type maps |
| @param out The file handle to write to |
| """ |
| |
| out.write(""" |
| /** |
| * Generic experimenter type value. Applies to all except |
| * top level message: Action, instruction, error, stats, queue_props, oxm |
| */ |
| #define OF_EXPERIMENTER_TYPE 0xffff |
| """) |
| gen_type_to_obj_map_functions(out) |
| gen_obj_to_type_map_functions(out) |
| |
| out.write("extern const int *const of_object_fixed_len[OF_VERSION_ARRAY_MAX];\n") |
| out.write("extern const int *const of_object_extra_len[OF_VERSION_ARRAY_MAX];\n") |
| |
| out.write(""" |
| /** |
| * Map a message in a wire buffer object to its OF object id. |
| * @param wbuf Pointer to a wire buffer object, populated with an OF message |
| * @returns The object ID of the message |
| * @returns OF_OBJECT_INVALID if unable to parse the message type |
| */ |
| |
| static inline of_object_id_t |
| of_wire_object_id_get(of_wire_buffer_t *wbuf) |
| { |
| of_message_t msg; |
| |
| msg = (of_message_t)WBUF_BUF(wbuf); |
| return of_message_to_object_id(msg, WBUF_CURRENT_BYTES(wbuf)); |
| } |
| |
| /** |
| * Use the type/length from the wire buffer and init the object |
| * @param obj The object being initialized |
| * @param base_object_id If > 0, this indicates the base object |
| * @param max_len If > 0, the max length to expect for the obj |
| * type for inheritance checking |
| * @return OF_ERROR_ |
| * |
| * Used for inheritance type objects such as actions and OXMs |
| * The type is checked and if valid, the object is initialized. |
| * Then the length is taken from the buffer. |
| * |
| * Note that the object version must already be properly set. |
| */ |
| static inline int |
| of_object_wire_init(of_object_t *obj, of_object_id_t base_object_id, |
| int max_len) |
| { |
| if (obj->wire_type_get != NULL) { |
| of_object_id_t id; |
| obj->wire_type_get(obj, &id); |
| if (!of_wire_id_valid(id, base_object_id)) { |
| return OF_ERROR_PARSE; |
| } |
| obj->object_id = id; |
| /* Call the init function for this object type; do not push to wire */ |
| of_object_init_map[id]((of_object_t *)(obj), obj->version, -1, 0); |
| } |
| if (obj->wire_length_get != NULL) { |
| int length; |
| obj->wire_length_get(obj, &length); |
| if (length < 0 || (max_len > 0 && length > max_len)) { |
| return OF_ERROR_PARSE; |
| } |
| obj->length = length; |
| } else { |
| /* @fixme Does this cover everything else? */ |
| obj->length = of_object_fixed_len[obj->version][base_object_id]; |
| } |
| |
| return OF_ERROR_NONE; |
| } |
| |
| """) |
| |
| # Generate the function that sets the object type fields |
| out.write(""" |
| |
| /** |
| * Map a message in a wire buffer object to its OF object id. |
| * @param wbuf Pointer to a wire buffer object, populated with an OF message |
| * @returns The object ID of the message |
| * @returns OF_OBJECT_INVALID if unable to parse the message type |
| * |
| * Version must be set in the buffer prior to calling this routine |
| */ |
| |
| static inline int |
| of_wire_message_object_id_set(of_wire_buffer_t *wbuf, of_object_id_t id) |
| { |
| int type; |
| of_version_t ver; |
| of_message_t msg; |
| |
| msg = (of_message_t)WBUF_BUF(wbuf); |
| |
| ver = of_message_version_get(msg); |
| |
| /* ASSERT(id is a message object) */ |
| |
| if ((type = of_object_to_wire_type(id, ver)) < 0) { |
| return OF_ERROR_PARAM; |
| } |
| of_message_type_set(msg, type); |
| |
| if ((type = of_object_to_stats_type(id, ver)) >= 0) { |
| /* It's a stats obj */ |
| of_message_stats_type_set(msg, type); |
| } |
| if ((type = of_object_to_error_type(id, ver)) >= 0) { |
| /* It's an error obj */ |
| of_message_error_type_set(msg, type); |
| } |
| if ((type = of_object_to_flow_mod_command(id, ver)) >= 0) { |
| /* It's a flow mod obj */ |
| of_message_flow_mod_command_set(msg, ver, type); |
| } |
| if (of_object_id_is_extension(id, ver)) { |
| uint32_t val32; |
| |
| /* Set the experimenter and subtype codes */ |
| val32 = of_extension_to_experimenter_id(id, ver); |
| of_message_experimenter_id_set(msg, val32); |
| val32 = of_extension_to_experimenter_subtype(id, ver); |
| of_message_experimenter_subtype_set(msg, val32); |
| } |
| |
| return OF_ERROR_NONE; |
| } |
| """) |
| |
| def gen_type_data_header(out): |
| |
| out.write(""" |
| /**************************************************************** |
| * |
| * The following declarations are for type and length calculations. |
| * Implementations may be found in of_type_maps.c |
| * |
| ****************************************************************/ |
| /* |
| * Special case length functions for objects with |
| */ |
| """) |
| for ((cls, name), prev) in of_g.special_offsets.items(): |
| s_cls = cls[3:] # take off of_ |
| out.write(""" |
| /** |
| * Special length calculation for %(cls)s->%(name)s. |
| * @param obj An object of type %(cls)s to check for |
| * length of %(name)s |
| * @param bytes[out] Where to store the calculated length |
| * |
| * Preceding data member is %(prev)s. |
| */ |
| extern int of_length_%(s_cls)s_%(name)s_get( |
| %(cls)s_t *obj, int *bytes); |
| |
| /** |
| * Special offset calculation for %(cls)s->%(name)s. |
| * @param obj An object of type %(cls)s to check for |
| * length of %(name)s |
| * @param offset[out] Where to store the calculated length |
| * |
| * Preceding data member is %(prev)s. |
| */ |
| extern int of_offset_%(s_cls)s_%(name)s_get( |
| %(cls)s_t *obj, int *offset); |
| """ % dict(cls=cls, s_cls=s_cls, name=name, prev=prev)) |
| |
| # NOT NEEDED YET |
| # # For non-message, variable length objects, give a fun that |
| # # calculates the length |
| # for cls in of_g.standard_class_order: |
| # s_cls = cls[3:] # take off of_ |
| # if !type_is_var_len(cls, version): |
| # continue |
| # out.write(""" |
| # /** |
| # * Special length calculation for variable length object %(cls)s |
| # * @param obj An object of type %(cls)s whose length is being calculated |
| # * @param bytes[out] Where to store the calculated length |
| # * |
| # * The assumption is that the length member of the object is not |
| # * valid and the length needs to be calculated from other information |
| # * such as the parent. |
| # */ |
| # extern int of_length_%(s_cls)s_get( |
| # %(cls)s_t *obj, int *bytes); |
| # """ % dict(cls=cls, s_cls=s_cls)) |
| |
| out.write(""" |
| /**************************************************************** |
| * Wire type/length functions. |
| ****************************************************************/ |
| |
| extern void of_object_message_wire_length_get(of_object_t *obj, int *bytes); |
| extern void of_object_message_wire_length_set(of_object_t *obj, int bytes); |
| |
| extern void of_oxm_wire_length_get(of_object_t *obj, int *bytes); |
| extern void of_oxm_wire_length_set(of_object_t *obj, int bytes); |
| extern void of_oxm_wire_object_id_get(of_object_t *obj, of_object_id_t *id); |
| extern void of_oxm_wire_object_id_set(of_object_t *obj, of_object_id_t id); |
| |
| extern void of_tlv16_wire_length_get(of_object_t *obj, int *bytes); |
| extern void of_tlv16_wire_length_set(of_object_t *obj, int bytes); |
| |
| extern void of_tlv16_wire_object_id_set(of_object_t *obj, of_object_id_t id); |
| |
| /* Wire length is uint16 at front of structure */ |
| extern void of_u16_len_wire_length_get(of_object_t *obj, int *bytes); |
| extern void of_u16_len_wire_length_set(of_object_t *obj, int bytes); |
| |
| extern void of_action_wire_object_id_get(of_object_t *obj, of_object_id_t *id); |
| extern void of_action_id_wire_object_id_get(of_object_t *obj, of_object_id_t *id); |
| extern void of_instruction_wire_object_id_get(of_object_t *obj, |
| of_object_id_t *id); |
| extern void of_queue_prop_wire_object_id_get(of_object_t *obj, |
| of_object_id_t *id); |
| extern void of_table_feature_prop_wire_object_id_get(of_object_t *obj, |
| of_object_id_t *id); |
| extern void of_meter_band_wire_object_id_get(of_object_t *obj, |
| of_object_id_t *id); |
| extern void of_hello_elem_wire_object_id_get(of_object_t *obj, |
| of_object_id_t *id); |
| |
| #define OF_OXM_LENGTH_GET(hdr) (((hdr) & 0xff) + 4) |
| #define OF_OXM_LENGTH_SET(hdr, val) \\ |
| (hdr) = ((hdr) & 0xffffff00) + (((val) - 4) & 0xff) |
| |
| extern void of_packet_queue_wire_length_get(of_object_t *obj, int *bytes); |
| extern void of_packet_queue_wire_length_set(of_object_t *obj, int bytes); |
| |
| extern void of_list_meter_band_stats_wire_length_get(of_object_t *obj, |
| int *bytes); |
| extern void of_meter_stats_wire_length_get(of_object_t *obj, int *bytes); |
| extern void of_meter_stats_wire_length_set(of_object_t *obj, int bytes); |
| extern int of_extension_object_wire_push(of_object_t *obj); |
| |
| """) |
| |
| |
| def gen_length_array(out): |
| """ |
| Generate an array giving the lengths of all objects/versions |
| @param out The file handle to which to write |
| """ |
| out.write(""" |
| /** |
| * An array with the number of bytes in the fixed length part |
| * of each OF object |
| */ |
| """) |
| |
| for version in of_g.of_version_range: |
| out.write(""" |
| static const int\nof_object_fixed_len_v%d[OF_OBJECT_COUNT] = { |
| -1, /* of_object is not instantiable */ |
| """ % version) |
| for i, cls in enumerate(of_g.all_class_order): |
| comma = "," |
| if i == len(of_g.all_class_order) - 1: |
| comma = "" |
| val = "-1" + comma |
| if (cls, version) in of_g.base_length: |
| val = str(of_g.base_length[(cls, version)]) + comma |
| out.write(" %-5s /* %d: %s */\n" % (val, i + 1, cls)) |
| out.write("};\n") |
| |
| out.write(""" |
| /** |
| * Unified map of fixed length part of each object |
| */ |
| const int *const of_object_fixed_len[OF_VERSION_ARRAY_MAX] = { |
| NULL, |
| """) |
| for version in of_g.of_version_range: |
| out.write(" of_object_fixed_len_v%d,\n" % version) |
| out.write(""" |
| }; |
| """) |
| |
| |
| def gen_extra_length_array(out): |
| """ |
| Generate an array giving the extra lengths of all objects/versions |
| @param out The file handle to which to write |
| """ |
| out.write(""" |
| /** |
| * An array with the number of bytes in the extra length part |
| * of each OF object |
| */ |
| """) |
| |
| for version in of_g.of_version_range: |
| out.write(""" |
| static const int\nof_object_extra_len_v%d[OF_OBJECT_COUNT] = { |
| -1, /* of_object is not instantiable */ |
| """ % version) |
| for i, cls in enumerate(of_g.all_class_order): |
| comma = "," |
| if i == len(of_g.all_class_order) - 1: |
| comma = "" |
| val = "-1" + comma |
| if (cls, version) in of_g.base_length: |
| val = str(of_g.extra_length.get((cls, version), 0)) + comma |
| out.write(" %-5s /* %d: %s */\n" % (val, i + 1, cls)) |
| out.write("};\n") |
| |
| out.write(""" |
| /** |
| * Unified map of extra length part of each object |
| */ |
| const int *const of_object_extra_len[OF_VERSION_ARRAY_MAX] = { |
| NULL, |
| """) |
| for version in of_g.of_version_range: |
| out.write(" of_object_extra_len_v%d,\n" % version) |
| out.write(""" |
| }; |
| """) |
| |
| |
| ################################################################ |
| ################################################################ |
| |
| # THIS IS PROBABLY NOT NEEDED AND MAY NOT BE CALLED CURRENTLY |
| def gen_object_id_to_stats_type(out): |
| out.write(""" |
| /** |
| * Map from message object ID to stats type |
| * |
| * All message object IDs are mapped for simplicity |
| */ |
| """) |
| for version in of_g.of_version_range: |
| out.write("const int *of_object_to_stats_type_map_v%d = {\n" % (i+1)) |
| out.write(" -1, /* of_object (invalid) */\n"); |
| for cls in of_g.ordered_messages: |
| name = cls[3:] |
| name = name[:name.find("_stats")] |
| if (((cls in type_maps.stats_reply_list) or |
| (cls in type_maps.stats_request_list)) and |
| name in type_maps.stats_types[i]): |
| out.write(" %d, /* %s */\n" % |
| (type_maps.stats_types[i][name], cls)) |
| else: |
| out.write(" -1, /* %s (invalid) */\n" % cls) |
| out.write("};\n\n") |
| |
| out.write(""" |
| /** |
| * Unified map, indexed by wire version which is 1-based. |
| */ |
| const int *of_object_to_stats_type_map[OF_VERSION_ARRAY_MAX] = { |
| NULL, |
| """) |
| for version in of_g.of_version_range: |
| out.write(" of_object_to_stats_type_map_v%d,\n" % version) |
| out.write(""" |
| }; |
| """) |
| |