c_gen/templates/of_object.c - onos-loxi - Gitiles

 :: # Copyright 2013, Big Switch Networks, Inc.
 :: #
 :: # LoxiGen is licensed under the Eclipse Public License, version 1.0 (EPL), with
 :: # the following special exception:
 :: #
 :: # LOXI Exception
 :: #
 :: # As a special exception to the terms of the EPL, you may distribute libraries
 :: # generated by LoxiGen (LoxiGen Libraries) under the terms of your choice, provided
 :: # that copyright and licensing notices generated by LoxiGen are not altered or removed
 :: # from the LoxiGen Libraries and the notice provided below is (i) included in
 :: # the LoxiGen Libraries, if distributed in source code form and (ii) included in any
 :: # documentation for the LoxiGen Libraries, if distributed in binary form.
 :: #
 :: # Notice: "Copyright 2013, Big Switch Networks, Inc. This library was generated by the LoxiGen Compiler."
 :: #
 :: # You may not use this file except in compliance with the EPL or LOXI Exception. You may obtain
 :: # a copy of the EPL at:
 :: #
 :: # http://www.eclipse.org/legal/epl-v10.html
 :: #
 :: # Unless required by applicable law or agreed to in writing, software
 :: # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 :: # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 :: # EPL for the specific language governing permissions and limitations
 :: # under the EPL.
 ::
 :: include('_copyright.c')

 /****************************************************************
  *
  * of_object.c
  *
  * These are the low level object constructor/destructor operators.
  *
  ****************************************************************/

 #include "loci_log.h"
 #include <loci/loci.h>
 #include <loci/loci_validator.h>

 /**
  * Create a generic new object and possibly underlying wire buffer
  * @param bytes The number of bytes to allocate in the underlying buffer
  *
  * If bytes <= 0, do not allocate a wire buffer.
  *
  * Note that this is an internal function.  The class specific
  * new functions should be called to properly initialize and track an
  * OF object.
  */

 of_object_t *
 of_object_new(int bytes)
 {
     of_object_t *obj;

     if ((obj = (of_object_t *)MALLOC(sizeof(*obj))) == NULL) {
         return NULL;
     }
     MEMSET(obj, 0, sizeof(*obj));

     if (bytes > 0) {
         if ((obj->wbuf = of_wire_buffer_new(bytes)) == NULL) {
             FREE(obj);
             return NULL;
         }
     }

     return obj;
 }

 /**
  * The delete function for LOCI objects
  *
  * @param obj Pointer to the object to be deleted
  *
  * This can be called on any LOCI object; it should not need to be
  * overridden.
  */

 void
 of_object_delete(of_object_t *obj)
 {
     if (obj == NULL) {
         return;
     }

     if (obj->parent == NULL) {
         of_wire_buffer_free(obj->wbuf);
     }

     FREE(obj);
 }

 /**
  * Duplicate an object
  * @param src The object to be duplicated
  * @returns Pointer to the duplicate or NULL on error.  Caller is responsible
  * for freeing the returned object.
  */

 of_object_t *
 of_object_dup(of_object_t *src)
 {
     of_object_t *dst;
     of_object_init_f init_fn;

     if ((dst = (of_object_t *)MALLOC(sizeof(*dst))) == NULL) {
         return NULL;
     }

     MEMSET(dst, 0, sizeof(*dst));

     /* Allocate a minimal wire buffer assuming we will not write to it. */
     if ((dst->wbuf = of_wire_buffer_new(src->length)) == NULL) {
         FREE(dst);
         return NULL;
     }

     init_fn = of_object_init_map[src->object_id];
     init_fn(dst, src->version, src->length, 0);

     MEMCPY(OF_OBJECT_BUFFER_INDEX(dst, 0),
            OF_OBJECT_BUFFER_INDEX(src, 0),
            src->length);

     return dst;
 }

 /**
  * Generic new from message call
  */

 of_object_t *
 of_object_new_from_message(of_message_t msg, int len)
 {
     of_object_id_t object_id;
     of_object_t *obj;
     of_version_t version;

     version = of_message_version_get(msg);
     if (!OF_VERSION_OKAY(version)) {
         return NULL;
     }

     if (of_validate_message(msg, len) != 0) {
         LOCI_LOG_ERROR("message validation failed\n");
         return NULL;
     }

     if ((obj = of_object_new(-1)) == NULL) {
         return NULL;
     }

     if (of_object_buffer_bind(obj, OF_MESSAGE_TO_BUFFER(msg), len,
                               OF_MESSAGE_FREE_FUNCTION) < 0) {
         FREE(obj);
         return NULL;
     }
     obj->version = version;

     of_header_wire_object_id_get(obj, &object_id);
     of_object_init_map[object_id](obj, version, len, 0);

     return obj;
 }

 /**
  * Parse a message without allocating memory
  *
  * @param storage Pointer to an uninitialized of_object_storage_t
  * @param buf Pointer to the buffer
  * @param length Length of buf
  * @returns Pointer to an initialized of_object_t
  *
  * The lifetime of the returned object is the minimum of the lifetimes of
  * 'buf' and 'storage'.
  */

 of_object_t *
 of_object_new_from_message_preallocated(of_object_storage_t *storage,
                                         uint8_t *buf, int len)
 {
     of_object_t *obj = &storage->obj;
     of_wire_buffer_t *wbuf = &storage->wbuf;
     of_message_t msg = buf;
     of_version_t version;
     of_object_id_t object_id;

     memset(storage, 0, sizeof(*storage));

     version = of_message_version_get(msg);
     if (!OF_VERSION_OKAY(version)) {
         return NULL;
     }

     if (of_validate_message(msg, len) != 0) {
         LOCI_LOG_ERROR("message validation failed\n");
         return NULL;
     }

     obj->version = version;
     obj->wbuf = wbuf;
     wbuf->buf = msg;
     wbuf->alloc_bytes = len;
     wbuf->current_bytes = len;

     of_header_wire_object_id_get(obj, &object_id);
     of_object_init_map[object_id](obj, version, len, 0);

     return obj;
 }

 /**
  * Bind an existing buffer to an LOCI object
  *
  * @param obj Pointer to the object to be updated
  * @param buf Pointer to the buffer to bind to obj
  * @param bytes Length of buf
  * @param buf_free An optional free function to be applied to
  * buf on deallocation
  *
  * This can be called on any LOCI object; it should not need to be
  * overridden.
  */

 int
 of_object_buffer_bind(of_object_t *obj, uint8_t *buf, int bytes,
                       of_buffer_free_f buf_free)
 {
     of_wire_buffer_t *wbuf;

     LOCI_ASSERT(buf != NULL);
     LOCI_ASSERT(bytes > 0);

     wbuf = of_wire_buffer_new_bind(buf, bytes, buf_free);
     if (wbuf == NULL) {
         return OF_ERROR_RESOURCE;
     }

     obj->wbuf = wbuf;
     obj->obj_offset = 0;
     obj->length = bytes;

     return OF_ERROR_NONE;
 }

 /**
  * Connect a child to a parent at the wire buffer level
  *
  * @param parent The top level object to bind to
  * @param child The sub-object connecting to the parent
  * @param offset The offset at which to attach the child RELATIVE
  * TO THE PARENT in the buffer
  * @param bytes The amount of the buffer dedicated to the child; see below
  *
  * This is used for 'get' accessors for composite types as well as
  * iterator functions for lists, both read (first/next) and write
  * (append_init, append_advance).
  *
  * Connect a child object to a parent by setting up the child's
  * wire_object to point to the parent's underlying buffer.  The value
  * of the parameter bytes is important in determining how the child
  * is initialized:
  * @li If bytes <= 0, the length and type of the child are not modified;
  * no additional space is added to the buffer.
  * @li If bytes > 0, the current wire buffer is grown to
  * accomodate this many bytes.  This is to support append operations.
  *
  * If an error is returned, future references to the child object
  * (until it is reinitialized) are undefined.
  */
 static void
 object_child_attach(of_object_t *parent, of_object_t *child,
                        int offset, int bytes)
 {
     of_object_attach(parent, child, offset, bytes);

     /*
      * bytes determines if this is a read or write setup.
      * If > 0, grow the buffer to accomodate the space
      * Otherwise do nothing
      */
     if (bytes > 0) { /* Set internal length, request buffer space */
         int tot_bytes; /* Total bytes to request for buffer if updated */

         /* Set up space for the child in the parent's buffer */
         tot_bytes = parent->obj_offset + offset + bytes;

         of_wire_buffer_grow(parent->wbuf, tot_bytes);
     }
     /* if bytes == 0 don't do anything */
 }

 /**
  * Check for room in an object's wire buffer.
  * @param obj The object being checked
  * @param new_len The desired length
  * @return Boolean
  */

 int
 of_object_can_grow(of_object_t *obj, int new_len)
 {
     return OF_OBJECT_ABSOLUTE_OFFSET(obj, new_len) <=
         WBUF_ALLOC_BYTES(obj->wbuf);
 }

 /**
  * Set the xid of a message object
  * @param obj The object being accessed
  * @param xid The xid value to store in the wire buffer
  * @return OF_ERROR_
  * Since the XID is common across all versions, this is used
  * for all XID accessors.
  */

 int
 of_object_xid_set(of_object_t *obj, uint32_t xid)
 {
     of_wire_buffer_t *wbuf;

     if ((wbuf = OF_OBJECT_TO_WBUF(obj)) == NULL) {
         return OF_ERROR_PARAM;
     }
     of_wire_buffer_u32_set(wbuf,
         OF_OBJECT_ABSOLUTE_OFFSET(obj, OF_MESSAGE_XID_OFFSET), xid);
     return OF_ERROR_NONE;
 }

 /**
  * Get the xid of a message object
  * @param obj The object being accessed
  * @param xid Pointer to where to store the xid value
  * @return OF_ERROR_
  * Since the XID is common across all versions, this is used
  * for all XID accessors.
  */

 int
 of_object_xid_get(of_object_t *obj, uint32_t *xid)
 {
     of_wire_buffer_t *wbuf;

     if ((wbuf = OF_OBJECT_TO_WBUF(obj)) == NULL) {
         return OF_ERROR_PARAM;
     }
     of_wire_buffer_u32_get(wbuf,
         OF_OBJECT_ABSOLUTE_OFFSET(obj, OF_MESSAGE_XID_OFFSET), xid);
     return OF_ERROR_NONE;
 }

 /****************************************************************
  *
  * Generic list operation implementations
  *
  ****************************************************************/

 /**
  * Set up a child for appending to a parent list
  * @param parent The parent; must be a list object
  * @param child The child object; must be of type list element
  * @return OF_ERROR_
  *
  * Attaches the wire buffer of the parent to the child by pointing
  * the child to the end of the parent.
  *
  * Set the wire length and type from the child.
  * Update the parent length adding the current child length
  *
  * After calling this function, the child object may be updated
  * resulting in changes to the parent's wire buffer
  *
  */

 int
 of_list_append_bind(of_object_t *parent, of_object_t *child)
 {
     if (parent == NULL || child == NULL ||
            parent->wbuf == NULL) {
         return OF_ERROR_PARAM;
     }

     if (!of_object_can_grow(parent, parent->length + child->length)) {
         return OF_ERROR_RESOURCE;
     }

     object_child_attach(parent, child, parent->length,
                         child->length);

     /* Update the wire length and type if needed */
     of_object_wire_length_set(child, child->length);
     of_object_wire_type_set(child);

     /* Update the parent's length */
     of_object_parent_length_update(parent, child->length);

     OF_LENGTH_CHECK_ASSERT(parent);

     return OF_ERROR_NONE;
 }

 /**
  * Generic atomic list append operation
  * @param list The list to which an item is being appended
  * @param item THe item to append to the list
  *
  * The contents of the item are copied to the end of the list.
  * Currently assumes the list is at the end of its parent.
  */
 int
 of_list_append(of_object_t *list, of_object_t *item)
 {
     int new_len;

     new_len = list->length + item->length;

     if (!of_object_can_grow(list, new_len)) {
         return OF_ERROR_RESOURCE;
     }

     of_wire_buffer_grow(list->wbuf,
                         OF_OBJECT_ABSOLUTE_OFFSET(list, new_len));

     MEMCPY(OF_OBJECT_BUFFER_INDEX(list, list->length),
            OF_OBJECT_BUFFER_INDEX(item, 0), item->length);

     /* Update the list's length */
     of_object_parent_length_update(list, item->length);

     OF_LENGTH_CHECK_ASSERT(list);

     return OF_ERROR_NONE;
 }

 /**
  * Generic list first function
  * @param parent The parent; must be a list object
  * @param child The child object; must be of type list element
  * @return OF_ERROR_RANGE if list is empty
  * @return OF_ERROR_
  *
  * Sets up the child to point to the first element in the list
  *
  * Child init must be called before this is called.
  *
  * @note TREAT AS PRIVATE
  * Does not fully initialized object
  */
 int
 of_list_first(of_object_t *parent, of_object_t *child)
 {
     if (parent->length == 0) { /* Empty list */
         return OF_ERROR_RANGE;
     }

     of_object_attach(parent, child, 0, child->length);

     return OF_ERROR_NONE;
 }

 /**
  * Return boolean indicating if child is pointing to last entry in parent
  * @param parent The parent; must be a list object
  * @param child The child object; must be of type list element
  * @return OF_ERROR_RANGE if list is empty
  * @return OF_ERROR_
  *
  */
 static int
 of_list_is_last(of_object_t *parent, of_object_t *child)
 {
     if (child->obj_offset + child->length >=
         parent->obj_offset + parent->length) {
         return 1;
     }

     return 0;
 }

 /**
  * Generic list next function
  * @param parent The parent; must be a list object
  * @param child The child object; must be of type list element
  * @return OF_ERROR_RANGE if at end of list
  * @return OF_ERROR_
  *
  * Advances the child to point to the subsequent element in the list.
  * The wire buffer object must not have been modified since the
  * previous call to _first or _next.
  *
  * @note TREAT AS PRIVATE
  * Does not fully initialized object
  */
 int
 of_list_next(of_object_t *parent, of_object_t *child)
 {
     int offset;

     LOCI_ASSERT(child->length > 0);

     /* Get offset of parent */
     if (of_list_is_last(parent, child)) {
         return OF_ERROR_RANGE; /* We were on the last object */
     }

     /* Offset is relative to parent start */
     offset = (child->obj_offset - parent->obj_offset) +
         child->length;
     of_object_attach(parent, child, offset, child->length);

     return OF_ERROR_NONE;
 }

 void
 of_object_wire_buffer_steal(of_object_t *obj, uint8_t **buffer)
 {
     LOCI_ASSERT(obj != NULL);
     of_wire_buffer_steal(obj->wbuf, buffer);
     obj->wbuf = NULL;
 }

 #define _MAX_PARENT_ITERATIONS 4
 /**
  * Iteratively update parent lengths thru hierarchy
  * @param obj The object whose length is being updated
  * @param delta The difference between the current and new lengths
  *
  * Note that this includes updating the object itself.  It will
  * iterate thru parents.
  *
  * Assumes delta > 0.
  */
 void
 of_object_parent_length_update(of_object_t *obj, int delta)
 {
 #ifndef NDEBUG
     int count = 0;
     of_wire_buffer_t *wbuf;  /* For debug asserts only */
 #endif

     while (obj != NULL) {
         LOCI_ASSERT(count++ < _MAX_PARENT_ITERATIONS);
         obj->length += delta;
         of_object_wire_length_set(obj, obj->length);
 #ifndef NDEBUG
         wbuf = obj->wbuf;
 #endif

         /* Asserts for wire length checking */
         LOCI_ASSERT(obj->length + obj->obj_offset <=
                WBUF_CURRENT_BYTES(wbuf));
         if (obj->parent == NULL) {
             LOCI_ASSERT(obj->length + obj->obj_offset ==
                    WBUF_CURRENT_BYTES(wbuf));
         }

         obj = obj->parent;
     }
 }

 /**
  * Use the type/length from the wire buffer and init the object
  * @param obj The object being initialized
  * @param base_object_id If > 0, this indicates the base object
  * @param max_len If > 0, the max length to expect for the obj
  * type for inheritance checking
  * @return OF_ERROR_
  *
  * Used for inheritance type objects such as actions and OXMs
  * The type is checked and if valid, the object is initialized.
  * Then the length is taken from the buffer.
  *
  * Note that the object version must already be properly set.
  */
 int
 of_object_wire_init(of_object_t *obj, of_object_id_t base_object_id,
                     int max_len)
 {
     if (loci_class_metadata[obj->object_id].wire_type_get != NULL) {
         of_object_id_t id;
         loci_class_metadata[obj->object_id].wire_type_get(obj, &id);
         obj->object_id = id;
         /* Call the init function for this object type; do not push to wire */
         of_object_init_map[id]((of_object_t *)(obj), obj->version, -1, 0);
     }
     if (loci_class_metadata[obj->object_id].wire_length_get != NULL) {
         int length;
         loci_class_metadata[obj->object_id].wire_length_get(obj, &length);
         if (length < 0 || (max_len > 0 && length > max_len)) {
             return OF_ERROR_PARSE;
         }
         obj->length = length;
     } else {
         /* @fixme Does this cover everything else? */
         obj->length = of_object_fixed_len[obj->version][base_object_id];
     }

     return OF_ERROR_NONE;
 }

 /*
  * Set member:
  *    get_wbuf_extent
  *    find offset of start of member
  *    if offset is at wbuf_extent (append new data)
  *        copy data at extent
  *        update parent length
  *    else
  *        find length of current entry
  *        move from end of current to extent to create (or remove) space
  *        copy data to offset
  *        update my length -- NEED LOCAL INFO TO DO THIS for some cases
  */

 /* Also need: get offset of member for all combinations */
 /* Also need: get length of member for all combinations */
 #if 0
 /**
  * Append the wire buffer data from src to the end of dst's wire buffer
  */
 int
 of_object_append_buffer(of_object_t *dst, of_object_t *src)
 {
     of_wire_buffer_t *s_wbuf, *d_wbuf;
     int orig_len, dst_offset, src_offset;

     d_wbuf = OF_OBJECT_TO_WBUF(dst);
     s_wbuf = OF_OBJECT_TO_WBUF(src);
     dst_offset = dst->obj_offset + dst_length;
     src_offset = src->obj_offset;
     OF_WIRE_BUFFER_INIT_CHECK(d_wbuf, dst_offset + src->length);
     MEMCPY(OF_WBUF_BUFFER_POINTER(d_wbuf, dst_offset),
            OF_WBUF_BUFFER_POINTER(s_wbuf, 0), src->length);

     orig_len = dst->length;
     dst->length += src->length;

     return OF_ERROR_NONE;
 }

 /**
  * Set the length of the actions object in a packet_in object
  */

 int
 of_packet_out_actions_length_set(of_packet_t *obj, int len)
 {
     if (obj == NULL || obj->object_id != OF_PACKET_IN ||
         obj->wbuf == NULL) {
         return OF_ERROR_PARAM;
     }

     obj->actions_len_set(obj, len);
 }

 int
 _packet_out_data_offset_get(of_packet_t *obj)
 {
     if (obj == NULL || obj->object_id != OF_PACKET_IN ||
         obj->wbuf == NULL) {
         return -1;
     }

     return OF_PACKET_OUT_FIXED_LENGTH + _packet_out_actions_length_get(obj);
 }


 /**
  * Simple length derivation function
  *
  * Most variable length fields are alone at the end of a structure.
  * Their length is a simple calculation, just the total length of
  * the parent minus the length of the non-variable part of the
  * parent's class type.
  *
  * @param parent The parent object
  * @param length (out) Where to store the length of the final
  * variable length member
  */
 int
 of_object_simple_length_derive(of_object_t *obj, int *length)
 {

 }
 #endif
	:: # Copyright 2013, Big Switch Networks, Inc.
	:: #
	:: # LoxiGen is licensed under the Eclipse Public License, version 1.0 (EPL), with
	:: # the following special exception:
	:: #
	:: # LOXI Exception
	:: #
	:: # As a special exception to the terms of the EPL, you may distribute libraries
	:: # generated by LoxiGen (LoxiGen Libraries) under the terms of your choice, provided
	:: # that copyright and licensing notices generated by LoxiGen are not altered or removed
	:: # from the LoxiGen Libraries and the notice provided below is (i) included in
	:: # the LoxiGen Libraries, if distributed in source code form and (ii) included in any
	:: # documentation for the LoxiGen Libraries, if distributed in binary form.
	:: #
	:: # Notice: "Copyright 2013, Big Switch Networks, Inc. This library was generated by the LoxiGen Compiler."
	:: #
	:: # You may not use this file except in compliance with the EPL or LOXI Exception. You may obtain
	:: # a copy of the EPL at:
	:: #
	:: # http://www.eclipse.org/legal/epl-v10.html
	:: #
	:: # Unless required by applicable law or agreed to in writing, software
	:: # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
	:: # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
	:: # EPL for the specific language governing permissions and limitations
	:: # under the EPL.
	::
	:: include('_copyright.c')

	/****************************************************************
	*
	* of_object.c
	*
	* These are the low level object constructor/destructor operators.
	*
	****************************************************************/

	#include "loci_log.h"
	#include <loci/loci.h>
	#include <loci/loci_validator.h>

	/**
	* Create a generic new object and possibly underlying wire buffer
	* @param bytes The number of bytes to allocate in the underlying buffer
	*
	* If bytes <= 0, do not allocate a wire buffer.
	*
	* Note that this is an internal function. The class specific
	* new functions should be called to properly initialize and track an
	* OF object.
	*/

	of_object_t *
	of_object_new(int bytes)
	{
	of_object_t *obj;

	if ((obj = (of_object_t )MALLOC(sizeof(obj))) == NULL) {
	return NULL;
	}
	MEMSET(obj, 0, sizeof(*obj));

	if (bytes > 0) {
	if ((obj->wbuf = of_wire_buffer_new(bytes)) == NULL) {
	FREE(obj);
	return NULL;
	}
	}

	return obj;
	}

	/**
	* The delete function for LOCI objects
	*
	* @param obj Pointer to the object to be deleted
	*
	* This can be called on any LOCI object; it should not need to be
	* overridden.
	*/

	void
	of_object_delete(of_object_t *obj)
	{
	if (obj == NULL) {
	return;
	}

	if (obj->parent == NULL) {
	of_wire_buffer_free(obj->wbuf);
	}

	FREE(obj);
	}

	/**
	* Duplicate an object
	* @param src The object to be duplicated
	* @returns Pointer to the duplicate or NULL on error. Caller is responsible
	* for freeing the returned object.
	*/

	of_object_t *
	of_object_dup(of_object_t *src)
	{
	of_object_t *dst;
	of_object_init_f init_fn;

	if ((dst = (of_object_t )MALLOC(sizeof(dst))) == NULL) {
	return NULL;
	}

	MEMSET(dst, 0, sizeof(*dst));

	/* Allocate a minimal wire buffer assuming we will not write to it. */
	if ((dst->wbuf = of_wire_buffer_new(src->length)) == NULL) {
	FREE(dst);
	return NULL;
	}

	init_fn = of_object_init_map[src->object_id];
	init_fn(dst, src->version, src->length, 0);

	MEMCPY(OF_OBJECT_BUFFER_INDEX(dst, 0),
	OF_OBJECT_BUFFER_INDEX(src, 0),
	src->length);

	return dst;
	}

	/**
	* Generic new from message call
	*/

	of_object_t *
	of_object_new_from_message(of_message_t msg, int len)
	{
	of_object_id_t object_id;
	of_object_t *obj;
	of_version_t version;

	version = of_message_version_get(msg);
	if (!OF_VERSION_OKAY(version)) {
	return NULL;
	}

	if (of_validate_message(msg, len) != 0) {
	LOCI_LOG_ERROR("message validation failed\n");
	return NULL;
	}

	if ((obj = of_object_new(-1)) == NULL) {
	return NULL;
	}

	if (of_object_buffer_bind(obj, OF_MESSAGE_TO_BUFFER(msg), len,
	OF_MESSAGE_FREE_FUNCTION) < 0) {
	FREE(obj);
	return NULL;
	}
	obj->version = version;

	of_header_wire_object_id_get(obj, &object_id);
	of_object_init_map[object_id](obj, version, len, 0);

	return obj;
	}

	/**
	* Parse a message without allocating memory
	*
	* @param storage Pointer to an uninitialized of_object_storage_t
	* @param buf Pointer to the buffer
	* @param length Length of buf
	* @returns Pointer to an initialized of_object_t
	*
	* The lifetime of the returned object is the minimum of the lifetimes of
	* 'buf' and 'storage'.
	*/

	of_object_t *
	of_object_new_from_message_preallocated(of_object_storage_t *storage,
	uint8_t *buf, int len)
	{
	of_object_t *obj = &storage->obj;
	of_wire_buffer_t *wbuf = &storage->wbuf;
	of_message_t msg = buf;
	of_version_t version;
	of_object_id_t object_id;

	memset(storage, 0, sizeof(*storage));

	version = of_message_version_get(msg);
	if (!OF_VERSION_OKAY(version)) {
	return NULL;
	}

	if (of_validate_message(msg, len) != 0) {
	LOCI_LOG_ERROR("message validation failed\n");
	return NULL;
	}

	obj->version = version;
	obj->wbuf = wbuf;
	wbuf->buf = msg;
	wbuf->alloc_bytes = len;
	wbuf->current_bytes = len;

	of_header_wire_object_id_get(obj, &object_id);
	of_object_init_map[object_id](obj, version, len, 0);

	return obj;
	}

	/**
	* Bind an existing buffer to an LOCI object
	*
	* @param obj Pointer to the object to be updated
	* @param buf Pointer to the buffer to bind to obj
	* @param bytes Length of buf
	* @param buf_free An optional free function to be applied to
	* buf on deallocation
	*
	* This can be called on any LOCI object; it should not need to be
	* overridden.
	*/

	int
	of_object_buffer_bind(of_object_t obj, uint8_t buf, int bytes,
	of_buffer_free_f buf_free)
	{
	of_wire_buffer_t *wbuf;

	LOCI_ASSERT(buf != NULL);
	LOCI_ASSERT(bytes > 0);

	wbuf = of_wire_buffer_new_bind(buf, bytes, buf_free);
	if (wbuf == NULL) {
	return OF_ERROR_RESOURCE;
	}

	obj->wbuf = wbuf;
	obj->obj_offset = 0;
	obj->length = bytes;

	return OF_ERROR_NONE;
	}

	/**
	* Connect a child to a parent at the wire buffer level
	*
	* @param parent The top level object to bind to
	* @param child The sub-object connecting to the parent
	* @param offset The offset at which to attach the child RELATIVE
	* TO THE PARENT in the buffer
	* @param bytes The amount of the buffer dedicated to the child; see below
	*
	* This is used for 'get' accessors for composite types as well as
	* iterator functions for lists, both read (first/next) and write
	* (append_init, append_advance).
	*
	* Connect a child object to a parent by setting up the child's
	* wire_object to point to the parent's underlying buffer. The value
	* of the parameter bytes is important in determining how the child
	* is initialized:
	* @li If bytes <= 0, the length and type of the child are not modified;
	* no additional space is added to the buffer.
	* @li If bytes > 0, the current wire buffer is grown to
	* accomodate this many bytes. This is to support append operations.
	*
	* If an error is returned, future references to the child object
	* (until it is reinitialized) are undefined.
	*/
	static void
	object_child_attach(of_object_t parent, of_object_t child,
	int offset, int bytes)
	{
	of_object_attach(parent, child, offset, bytes);

	/*
	* bytes determines if this is a read or write setup.
	* If > 0, grow the buffer to accomodate the space
	* Otherwise do nothing
	*/
	if (bytes > 0) { /* Set internal length, request buffer space */
	int tot_bytes; /* Total bytes to request for buffer if updated */

	/* Set up space for the child in the parent's buffer */
	tot_bytes = parent->obj_offset + offset + bytes;

	of_wire_buffer_grow(parent->wbuf, tot_bytes);
	}
	/* if bytes == 0 don't do anything */
	}

	/**
	* Check for room in an object's wire buffer.
	* @param obj The object being checked
	* @param new_len The desired length
	* @return Boolean
	*/

	int
	of_object_can_grow(of_object_t *obj, int new_len)
	{
	return OF_OBJECT_ABSOLUTE_OFFSET(obj, new_len) <=
	WBUF_ALLOC_BYTES(obj->wbuf);
	}

	/**
	* Set the xid of a message object
	* @param obj The object being accessed
	* @param xid The xid value to store in the wire buffer
	* @return OF_ERROR_
	* Since the XID is common across all versions, this is used
	* for all XID accessors.
	*/

	int
	of_object_xid_set(of_object_t *obj, uint32_t xid)
	{
	of_wire_buffer_t *wbuf;

	if ((wbuf = OF_OBJECT_TO_WBUF(obj)) == NULL) {
	return OF_ERROR_PARAM;
	}
	of_wire_buffer_u32_set(wbuf,
	OF_OBJECT_ABSOLUTE_OFFSET(obj, OF_MESSAGE_XID_OFFSET), xid);
	return OF_ERROR_NONE;
	}

	/**
	* Get the xid of a message object
	* @param obj The object being accessed
	* @param xid Pointer to where to store the xid value
	* @return OF_ERROR_
	* Since the XID is common across all versions, this is used
	* for all XID accessors.
	*/

	int
	of_object_xid_get(of_object_t obj, uint32_t xid)
	{
	of_wire_buffer_t *wbuf;

	if ((wbuf = OF_OBJECT_TO_WBUF(obj)) == NULL) {
	return OF_ERROR_PARAM;
	}
	of_wire_buffer_u32_get(wbuf,
	OF_OBJECT_ABSOLUTE_OFFSET(obj, OF_MESSAGE_XID_OFFSET), xid);
	return OF_ERROR_NONE;
	}

	/****************************************************************
	*
	* Generic list operation implementations
	*
	****************************************************************/

	/**
	* Set up a child for appending to a parent list
	* @param parent The parent; must be a list object
	* @param child The child object; must be of type list element
	* @return OF_ERROR_
	*
	* Attaches the wire buffer of the parent to the child by pointing
	* the child to the end of the parent.
	*
	* Set the wire length and type from the child.
	* Update the parent length adding the current child length
	*
	* After calling this function, the child object may be updated
	* resulting in changes to the parent's wire buffer
	*
	*/

	int
	of_list_append_bind(of_object_t parent, of_object_t child)
	{
	if (parent == NULL \|\| child == NULL \|\|
	parent->wbuf == NULL) {
	return OF_ERROR_PARAM;
	}

	if (!of_object_can_grow(parent, parent->length + child->length)) {
	return OF_ERROR_RESOURCE;
	}

	object_child_attach(parent, child, parent->length,
	child->length);

	/* Update the wire length and type if needed */
	of_object_wire_length_set(child, child->length);
	of_object_wire_type_set(child);

	/* Update the parent's length */
	of_object_parent_length_update(parent, child->length);

	OF_LENGTH_CHECK_ASSERT(parent);

	return OF_ERROR_NONE;
	}

	/**
	* Generic atomic list append operation
	* @param list The list to which an item is being appended
	* @param item THe item to append to the list
	*
	* The contents of the item are copied to the end of the list.
	* Currently assumes the list is at the end of its parent.
	*/
	int
	of_list_append(of_object_t list, of_object_t item)
	{
	int new_len;

	new_len = list->length + item->length;

	if (!of_object_can_grow(list, new_len)) {
	return OF_ERROR_RESOURCE;
	}

	of_wire_buffer_grow(list->wbuf,
	OF_OBJECT_ABSOLUTE_OFFSET(list, new_len));

	MEMCPY(OF_OBJECT_BUFFER_INDEX(list, list->length),
	OF_OBJECT_BUFFER_INDEX(item, 0), item->length);

	/* Update the list's length */
	of_object_parent_length_update(list, item->length);

	OF_LENGTH_CHECK_ASSERT(list);

	return OF_ERROR_NONE;
	}

	/**
	* Generic list first function
	* @param parent The parent; must be a list object
	* @param child The child object; must be of type list element
	* @return OF_ERROR_RANGE if list is empty
	* @return OF_ERROR_
	*
	* Sets up the child to point to the first element in the list
	*
	* Child init must be called before this is called.
	*
	* @note TREAT AS PRIVATE
	* Does not fully initialized object
	*/
	int
	of_list_first(of_object_t parent, of_object_t child)
	{
	if (parent->length == 0) { /* Empty list */
	return OF_ERROR_RANGE;
	}

	of_object_attach(parent, child, 0, child->length);

	return OF_ERROR_NONE;
	}

	/**
	* Return boolean indicating if child is pointing to last entry in parent
	* @param parent The parent; must be a list object
	* @param child The child object; must be of type list element
	* @return OF_ERROR_RANGE if list is empty
	* @return OF_ERROR_
	*
	*/
	static int
	of_list_is_last(of_object_t parent, of_object_t child)
	{
	if (child->obj_offset + child->length >=
	parent->obj_offset + parent->length) {
	return 1;
	}

	return 0;
	}

	/**
	* Generic list next function
	* @param parent The parent; must be a list object
	* @param child The child object; must be of type list element
	* @return OF_ERROR_RANGE if at end of list
	* @return OF_ERROR_
	*
	* Advances the child to point to the subsequent element in the list.
	* The wire buffer object must not have been modified since the
	* previous call to _first or _next.
	*
	* @note TREAT AS PRIVATE
	* Does not fully initialized object
	*/
	int
	of_list_next(of_object_t parent, of_object_t child)
	{
	int offset;

	LOCI_ASSERT(child->length > 0);

	/* Get offset of parent */
	if (of_list_is_last(parent, child)) {
	return OF_ERROR_RANGE; /* We were on the last object */
	}

	/* Offset is relative to parent start */
	offset = (child->obj_offset - parent->obj_offset) +
	child->length;
	of_object_attach(parent, child, offset, child->length);

	return OF_ERROR_NONE;
	}

	void
	of_object_wire_buffer_steal(of_object_t obj, uint8_t *buffer)
	{
	LOCI_ASSERT(obj != NULL);
	of_wire_buffer_steal(obj->wbuf, buffer);
	obj->wbuf = NULL;
	}

	#define _MAX_PARENT_ITERATIONS 4
	/**
	* Iteratively update parent lengths thru hierarchy
	* @param obj The object whose length is being updated
	* @param delta The difference between the current and new lengths
	*
	* Note that this includes updating the object itself. It will
	* iterate thru parents.
	*
	* Assumes delta > 0.
	*/
	void
	of_object_parent_length_update(of_object_t *obj, int delta)
	{
	#ifndef NDEBUG
	int count = 0;
	of_wire_buffer_t wbuf; / For debug asserts only */
	#endif

	while (obj != NULL) {
	LOCI_ASSERT(count++ < _MAX_PARENT_ITERATIONS);
	obj->length += delta;
	of_object_wire_length_set(obj, obj->length);
	#ifndef NDEBUG
	wbuf = obj->wbuf;
	#endif

	/* Asserts for wire length checking */
	LOCI_ASSERT(obj->length + obj->obj_offset <=
	WBUF_CURRENT_BYTES(wbuf));
	if (obj->parent == NULL) {
	LOCI_ASSERT(obj->length + obj->obj_offset ==
	WBUF_CURRENT_BYTES(wbuf));
	}

	obj = obj->parent;
	}
	}

	/**
	* Use the type/length from the wire buffer and init the object
	* @param obj The object being initialized
	* @param base_object_id If > 0, this indicates the base object
	* @param max_len If > 0, the max length to expect for the obj
	* type for inheritance checking
	* @return OF_ERROR_
	*
	* Used for inheritance type objects such as actions and OXMs
	* The type is checked and if valid, the object is initialized.
	* Then the length is taken from the buffer.
	*
	* Note that the object version must already be properly set.
	*/
	int
	of_object_wire_init(of_object_t *obj, of_object_id_t base_object_id,
	int max_len)
	{
	if (loci_class_metadata[obj->object_id].wire_type_get != NULL) {
	of_object_id_t id;
	loci_class_metadata[obj->object_id].wire_type_get(obj, &id);
	obj->object_id = id;
	/* Call the init function for this object type; do not push to wire */
	of_object_init_map[id]((of_object_t *)(obj), obj->version, -1, 0);
	}
	if (loci_class_metadata[obj->object_id].wire_length_get != NULL) {
	int length;
	loci_class_metadata[obj->object_id].wire_length_get(obj, &length);
	if (length < 0 \|\| (max_len > 0 && length > max_len)) {
	return OF_ERROR_PARSE;
	}
	obj->length = length;
	} else {
	/* @fixme Does this cover everything else? */
	obj->length = of_object_fixed_len[obj->version][base_object_id];
	}

	return OF_ERROR_NONE;
	}

	/*
	* Set member:
	* get_wbuf_extent
	* find offset of start of member
	* if offset is at wbuf_extent (append new data)
	* copy data at extent
	* update parent length
	* else
	* find length of current entry
	* move from end of current to extent to create (or remove) space
	* copy data to offset
	* update my length -- NEED LOCAL INFO TO DO THIS for some cases
	*/

	/* Also need: get offset of member for all combinations */
	/* Also need: get length of member for all combinations */
	#if 0
	/**
	* Append the wire buffer data from src to the end of dst's wire buffer
	*/
	int
	of_object_append_buffer(of_object_t dst, of_object_t src)
	{
	of_wire_buffer_t s_wbuf, d_wbuf;
	int orig_len, dst_offset, src_offset;

	d_wbuf = OF_OBJECT_TO_WBUF(dst);
	s_wbuf = OF_OBJECT_TO_WBUF(src);
	dst_offset = dst->obj_offset + dst_length;
	src_offset = src->obj_offset;
	OF_WIRE_BUFFER_INIT_CHECK(d_wbuf, dst_offset + src->length);
	MEMCPY(OF_WBUF_BUFFER_POINTER(d_wbuf, dst_offset),
	OF_WBUF_BUFFER_POINTER(s_wbuf, 0), src->length);

	orig_len = dst->length;
	dst->length += src->length;

	return OF_ERROR_NONE;
	}

	/**
	* Set the length of the actions object in a packet_in object
	*/

	int
	of_packet_out_actions_length_set(of_packet_t *obj, int len)
	{
	if (obj == NULL \|\| obj->object_id != OF_PACKET_IN \|\|
	obj->wbuf == NULL) {
	return OF_ERROR_PARAM;
	}

	obj->actions_len_set(obj, len);
	}

	int
	_packet_out_data_offset_get(of_packet_t *obj)
	{
	if (obj == NULL \|\| obj->object_id != OF_PACKET_IN \|\|
	obj->wbuf == NULL) {
	return -1;
	}

	return OF_PACKET_OUT_FIXED_LENGTH + _packet_out_actions_length_get(obj);
	}


	/**
	* Simple length derivation function
	*
	* Most variable length fields are alone at the end of a structure.
	* Their length is a simple calculation, just the total length of
	* the parent minus the length of the non-variable part of the
	* parent's class type.
	*
	* @param parent The parent object
	* @param length (out) Where to store the length of the final
	* variable length member
	*/
	int
	of_object_simple_length_derive(of_object_t obj, int length)
	{

	}
	#endif