| This bundle tries to be complaint to the UPnP Base Driver OSGi R4 specification. | |
| At the moment the bundle do not support the following requirement: | |
| - upnp.ssdp.address Configuration Service | |
| - exported device changes: if a service already exported as UPnP Device changes | |
| it's own configuration, i.e.: implements new service, changes the friendly name, etc., | |
| the new service description is not reflected on the UPnP Device | |
| - icon for exported device is not tested | |
| - no localization support | |
| The bundle provides extra capabilities: | |
| - the bundles implements the org.apache.felix.upnp.extra.controller specification | |
| Finally the bundle can be configured by setting the following properties divided by categories: | |
| 1 - LOGGING | |
| felix.upnpbase.log: integer which identifies the verbosity of the bundle | |
| felix.upnpbase.cyberdomo.log: boolean which enables or disables the UPnP CyberDomo SDK debugging messages | |
| 2 - FACILITY | |
| felix.upnpbase.exporter.enabled: boolean which enables or disables the Exporter facilities of the UPnP Base Driver | |
| felix.upnpbase.importer.enabled: boolean which enables or disables the Exporter facilities of the UPnP Base Driver | |
| 3 - NETWORK | |
| felix.upnpbase.cyberdomo.net.loopback: boolean which enables or disables the use of Loopback devices | |
| felix.upnpbase.cyberdomo.net.onlyIPV4: boolean which enables or disables the use of IPv4 addresses | |
| felix.upnpbase.cyberdomo.net.onlyIPV6: boolean which enables or disables the use of IPv6 addresses (if base driver is running on JDK 1.4 or greater) | |
| cyberdomo.ssdp.mx: integer which idntifies the value to set in MX packet while performing discovery operation on UPnP | |
| cyberdomo.ssdp.buffersize: integer which identifies buffer size for UDP packet | |
| cyberdomo.ssdp.port: integer which identifies the destination port to use for SDDP multicast discovery packet | |