| ''' |
| OFTests for functionality needed from the OLT. |
| ''' |
| |
| import logging |
| from __builtin__ import xrange |
| from oltbase import OltBaseTest |
| import oftest.packet as scapy |
| import ofp |
| import time |
| |
| from oftest.testutils import * |
| |
| from IGMP import IGMPv3, IGMPv3gr, IGMP_TYPE_V3_MEMBERSHIP_REPORT,\ |
| IGMP_V3_GR_TYPE_INCLUDE,\ |
| IGMP_V3_GR_TYPE_EXCLUDE |
| |
| from oltconstants import * |
| |
| |
| class EapolPacketIn(OltBaseTest): |
| """Verify packet-ins are sent for EAPOL packets """ |
| |
| def runTest(self): |
| logging.info("Running EAPOL Packet In test") |
| |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.eth_type(0x888e)) |
| # Use ethertype 0x888e and multicast destination MAC address |
| pkt = simple_eth_packet(pktlen=60, eth_dst='01:00:5E:7F:FF:FF', eth_type=0x888e) |
| |
| self.testPacketIn(match, pkt) |
| |
| |
| class ARPPacketIn(OltBaseTest): |
| """Verify packet-ins are sent for ARP packets """ |
| |
| def runTest(self): |
| logging.info("Running ARP Packet In test") |
| |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.eth_type(0x0806)) |
| |
| # Use ethertype 0x0806 |
| pkt = simple_eth_packet(eth_type=0x0806) |
| |
| self.testPacketIn(match, pkt) |
| |
| |
| class IGMPPacketIn(OltBaseTest): |
| """Verify packet-ins are sent for IGMP packets """ |
| |
| def runTest(self): |
| logging.info("Running IGMP Packet In test") |
| |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.eth_type(0x800)) |
| match.oxm_list.append(ofp.oxm.ip_proto(2)) |
| |
| igmp = IGMPv3(type=IGMP_TYPE_V3_MEMBERSHIP_REPORT, max_resp_code=30, gaddr="224.0.0.1") |
| igmp.grps = [IGMPv3gr(rtype=IGMP_V3_GR_TYPE_EXCLUDE, mcaddr="229.10.20.30")] |
| pkt = IGMPv3.fixup( scapy.Ether(src='00:00:00:00:be:ef') / scapy.IP() / igmp ) |
| pkt = pkt / ("0" * (100 - len(pkt))) |
| |
| self.testPacketIn(match, pkt) |
| |
| |
| class IGMPQueryPacketOut(OltBaseTest): |
| """Verify sending multicast membership queries down to onu_ports""" |
| |
| def runTest(self): |
| logging.info("Running IGMP query packet out") |
| |
| igmp = IGMPv3() # by default this is a query |
| pkt = buildIgmp(igmp) |
| |
| msg = ofp.message.packet_out( |
| in_port=ofp.OFPP_CONTROLLER, |
| actions=[ofp.action.output(port=onu_port)], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| data=str(pkt)) |
| |
| self.controller.message_send(msg) |
| |
| rv = self.controller.message_send(msg) |
| self.assertTrue(rv == 0, "Error sending put message") |
| verify_no_errors(self.controller) |
| |
| verify_packet(self, pkt, onu_port) |
| |
| |
| class TestMeter(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running Meter tests") |
| dropMeterBand = ofp.meter_band.drop(rate=640) |
| meter_mod = ofp.message.meter_mod(xid=1, command=ofp.OFPMC_ADD, meter_id=1, meters=[dropMeterBand]) |
| self.controller.message_send(meter_mod) |
| |
| time.sleep(1) |
| |
| verify_no_errors(self.controller) |
| |
| vlan_id = 201 |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(onu_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=42, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ofp.action.output(port=olt_port)]), |
| ofp.instruction.meter(meter_id = 1) |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1000) |
| |
| self.controller.message_send(request) |
| time.sleep(1) |
| verify_no_errors(self.controller) |
| |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(olt_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=43, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ofp.action.output(port=onu_port)]), |
| ofp.instruction.meter(meter_id = 1) |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1000) |
| |
| self.controller.message_send(request) |
| time.sleep(1) |
| verify_no_errors(self.controller) |
| do_barrier(self.controller) |
| time.sleep(5) |
| |
| inPkt = simple_udp_packet(dl_vlan_enable=True, vlan_vid=vlan_id, vlan_pcp=0) |
| # downstream |
| # self.dataplane.send(olt_port, str(inPkt)) |
| # verify_packet(self, inPkt, onu_port) |
| # upstream |
| # for i in range(1,400): |
| # self.dataplane.send(onu_port, str(inPkt)) |
| # verify_packet(self, inPkt, olt_port) |
| |
| # clean up the test |
| meter_mod = ofp.message.meter_mod(xid=2, command=ofp.OFPMC_DELETE, meter_id=1) |
| self.controller.message_send(meter_mod) |
| time.sleep(1) |
| delete_all_flows(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| class TestDuplicateMeter(OltBaseTest): |
| def runTest(self): |
| logging.info("Running Duplicate Meter Test") |
| dropMeterBand = ofp.meter_band.drop(rate=500) |
| meter_mod = ofp.message.meter_mod(xid=1, command=ofp.OFPMC_ADD, meter_id=1, meters=[dropMeterBand]) |
| self.controller.message_send(meter_mod) |
| self.controller.message_send(meter_mod) |
| |
| time.sleep(1) |
| |
| try: |
| verify_no_errors(self.controller) |
| except AssertionError as e: |
| if (not e.message == "unexpected error type=12 code=1"): |
| raise AssertionError("Incorrect error type: %s" % e.message) |
| |
| |
| class VlanTest(OltBaseTest): |
| """Verify the switch can push/pop a VLAN tag and forward out a port """ |
| |
| def runTest(self): |
| logging.info("Running push VLAN test") |
| |
| vlan_id = 200 |
| |
| delete_all_flows(self.controller) |
| |
| # PUSH |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(onu_port)) |
| if device_type == "cpqd": |
| match.oxm_list.append(ofp.oxm.vlan_vid(value=ofp.OFPVID_NONE)) |
| actions = [ |
| ofp.action.push_vlan(ethertype=0x8100), |
| ofp.action.set_field(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)), |
| ofp.action.set_field(ofp.oxm.vlan_pcp(0)), |
| ofp.action.output(port=olt_port) |
| ] |
| else: # pmc, normal |
| match.oxm_list.append(ofp.oxm.vlan_vid_masked(value=ofp.OFPVID_PRESENT, value_mask=ofp.OFPVID_PRESENT)) |
| match.oxm_list.append(ofp.oxm.vlan_pcp(value = 0)) |
| actions = [ |
| ofp.action.set_field(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)), |
| ofp.action.set_field(ofp.oxm.vlan_pcp(0)), |
| ofp.action.output(port=olt_port) |
| ] |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=42, |
| match=match, |
| instructions=[ofp.instruction.apply_actions(actions=actions)], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1000) |
| |
| logging.info("Inserting flow tagging upstream") |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # POP |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(olt_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=43, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ |
| ofp.action.pop_vlan(), |
| ofp.action.output(port=onu_port)])], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1000) |
| |
| logging.info("Inserting flow tagging downstream") |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| time.sleep(5) |
| |
| inPkt = simple_udp_packet(dl_vlan_enable=True, vlan_vid=0, vlan_pcp=0) |
| outPkt = simple_udp_packet(pktlen=100, dl_vlan_enable=True, |
| vlan_vid=vlan_id, vlan_pcp=0, dl_vlan_cfi=0) |
| |
| # Send untagged packet in the ONU port and expect tagged packet out the OLT port |
| self.dataplane.send(onu_port, str(inPkt)) |
| verify_packet(self, outPkt, olt_port) |
| |
| # Send untagged packet in the OLT port and expect no packets to come out |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_packets(self, outPkt, []) |
| |
| inPkt = simple_udp_packet(pktlen=104, dl_vlan_enable=True, |
| vlan_vid=vlan_id, vlan_pcp=0, dl_vlan_cfi=0) |
| if device_type == 'pmc': |
| outPkt = simple_udp_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=0, vlan_pcp=0) |
| else: # "normal", "cpqd"" |
| outPkt = simple_udp_packet(pktlen=100) |
| |
| # Send tagged packet in the OLT port and expect untagged packet out the OLT port |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_packet(self, outPkt, onu_port) |
| |
| # Send tagged packet in the ONU port and expect no packets to come out |
| self.dataplane.send(onu_port, str(inPkt)) |
| verify_packets(self, outPkt, []) |
| |
| |
| |
| |
| |
| class TestGroupAdd(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running Group tests") |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| test_group_id = 1 |
| |
| # output to two ONU |
| group_add = createAllGroupAdd(test_group_id, ports=[onu_port, onu_port2]) |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Remove the group and then readd it. |
| group_delete = ofp.message.group_delete(group_id=test_group_id) |
| self.controller.message_send(group_delete) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| group_add = createAllGroupAdd(test_group_id, [onu_port, onu_port2]) |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| # clean up the test |
| group_delete = ofp.message.group_delete(group_id=test_group_id) |
| self.controller.message_send(group_delete) |
| |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| class TestGroupMod(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running Group tests") |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| test_group_id = 1 |
| |
| group_add = createAllGroupAdd(test_group_id, [onu_port, onu_port2]) |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Modifying the group |
| group_mod = createAllGroupMod(test_group_id, [onu_port2]) |
| |
| self.controller.message_send(group_mod) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Add a bucket into the group |
| group_mod = createAllGroupMod(test_group_id, [onu_port, onu_port2]) |
| self.controller.message_send(group_mod) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Modifying a non-existing group |
| group_mod = createAllGroupMod(777, [onu_port2]) |
| |
| self.controller.message_send(group_mod) |
| do_barrier(self.controller) |
| errorExperienced = 0 |
| try: |
| verify_no_errors(self.controller) |
| except AssertionError as e: |
| errorExperienced = 1 |
| if (not (e.message == "unexpected error type=6 code=8")): |
| raise AssertionError("Incorrect error type: %s" % e.message) |
| if not errorExperienced: |
| raise AssertionError("An error message is expected, but not shown.") |
| |
| |
| # clean up the test |
| group_delete = ofp.message.group_delete(xid=2, group_id=test_group_id) |
| self.controller.message_send(group_delete) |
| |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| class TestDuplicateGroup(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running Group tests") |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| test_group_id = 1 |
| group_add = createAllGroupAdd(test_group_id, ports=[onu_port]) |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Add the same group id |
| duplicate_group_fail = 0 |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| try: |
| verify_no_errors(self.controller) |
| except AssertionError as e: |
| duplicate_group_fail = 1 |
| if (not e.message == "unexpected error type=6 code=0"): |
| raise AssertionError("Incorrect error type: %s" % e.message) |
| if not duplicate_group_fail: |
| raise AssertionError("Adding duplicate groups didn't raise an error.") |
| |
| # clean up the test |
| group_delete = ofp.message.group_delete(xid=2, group_id=test_group_id) |
| self.controller.message_send(group_delete) |
| |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| class TestGroupAndFlow(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running Group tests") |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| # Create a group |
| test_group_id = 1 |
| group_add = createAllGroupAdd(test_group_id, ports=[onu_port]) |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Create a flow rule matching olt port and vlan id |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(olt_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | 201)) |
| |
| flow_pointing_to_group = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=43, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ofp.action.group(group_id=test_group_id)])], |
| buffer_id=ofp.OFP_NO_BUFFER, priority=1000) |
| |
| self.controller.message_send(flow_pointing_to_group) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # After letting a flow rule point to the group, test we can do group_mod |
| group_mod = createAllGroupMod(test_group_id, ports=[onu_port2]) |
| self.controller.message_send(group_mod) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Test we can remove flows and then remove group |
| flow_delete = ofp.message.flow_delete(table_id=test_param_get("table", 0)) |
| self.controller.message_send(flow_delete) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| group_delete = ofp.message.group_delete(xid=3, group_id=test_group_id) |
| self.controller.message_send(group_delete) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Add the group and flow back, test it we can first remove group and then remove the flow. |
| '''group_add = createAllGroupAdd(test_group_id, ports=[onu_port]) |
| self.controller.message_send(group_add) |
| |
| self.controller.message_send(flow_pointing_to_group) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| group_delete = ofp.message.group_delete(xid = 4, group_id = test_group_id) |
| self.controller.message_send(group_delete)''' |
| |
| self.controller.message_send(flow_delete) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| class TestGroupForwarding(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running Group datapath forwarding tests") |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| vlan_id = 201 |
| |
| # Create a group |
| test_group_id = 1 |
| group_add = createAllGroupAdd(test_group_id, [onu_port]) |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Create a flow rule matching olt port and vlan id |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(olt_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=43, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ofp.action.group(group_id=test_group_id)]), |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, priority=1000) |
| |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # It takes some time for flows to propagate down to the data plane |
| time.sleep(10) |
| |
| inPkt = simple_udp_packet(pktlen=104, dl_vlan_enable=True, |
| vlan_vid=vlan_id, vlan_pcp=0, dl_vlan_cfi=0, eth_dst="01:01:11:12:11:12") |
| outPkt = inPkt |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_packet(self, outPkt, onu_port) |
| |
| |
| # Now put 2 ONU ports in the group and test that the input packet is |
| # duplicated out both ports |
| group_mod = createAllGroupMod(test_group_id, ports=[onu_port, onu_port2]) |
| self.controller.message_send(group_mod) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # It takes some time for flows to propagate down to the data plane |
| time.sleep(10) |
| |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_packet(self, outPkt, onu_port2) |
| verify_packet(self, outPkt, onu_port) |
| # verify_packets(self, outPkt, [onu_port,onu_port2]) |
| |
| # clean up the test |
| request = ofp.message.flow_delete(table_id=test_param_get("table", 0)) |
| self.controller.message_send(request) |
| group_delete = ofp.message.group_delete(xid=2, group_id=test_group_id) |
| self.controller.message_send(group_delete) |
| |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| class TestGroupModForwarding(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running datapath forwarding tests for group mod") |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| vlan_id = 201 |
| |
| # Create a group |
| test_group_id = 1 |
| group_add = createAllGroupAdd(test_group_id, [onu_port, onu_port2]) |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Create a flow rule matching olt port and vlan id |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(olt_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=43, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ofp.action.group(group_id=test_group_id)]), |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, priority=1000) |
| |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # It takes some time for flows to propagate down to the data plane |
| time.sleep(10) |
| |
| inPkt = simple_udp_packet(pktlen=104, dl_vlan_enable=True, |
| vlan_vid=vlan_id, vlan_pcp=0, dl_vlan_cfi=0, eth_dst="01:01:11:12:11:12") |
| outPkt = inPkt |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_packet(self, outPkt, onu_port) |
| verify_packet(self, outPkt, onu_port2) |
| |
| # Now remove onu port 1 from the group and test that the input packet is no longer forwarded to onu port 1 |
| group_mod = createAllGroupMod(test_group_id, ports=[onu_port2]) |
| self.controller.message_send(group_mod) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| time.sleep(10) |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_no_packet(self, outPkt, onu_port) |
| verify_packet(self, outPkt, onu_port2) |
| |
| # Now remove all ports in the group and test that the input packet is no longer forwarded to any port |
| group_mod = createAllGroupMod(test_group_id, ports=[]) |
| self.controller.message_send(group_mod) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| time.sleep(10) |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_packets(self, outPkt, []) |
| |
| |
| class TransparentVlanTest(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running transparent vlan tests") |
| delete_all_flows(self.controller) |
| |
| vlan_id = 201 |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(onu_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=42, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ |
| ofp.action.output(port=olt_port)]), |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1000) |
| |
| self.controller.message_send(request) |
| |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(olt_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=43, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ |
| ofp.action.output(port=onu_port)]), |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1000) |
| |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # It takes some time for flows to propagate down to the data plane |
| time.sleep(2) |
| |
| inPkt = simple_udp_packet(dl_vlan_enable=True, vlan_vid=vlan_id, vlan_pcp=0) |
| |
| # upstream |
| self.dataplane.send(onu_port, str(inPkt)) |
| verify_packet(self, inPkt, olt_port) |
| |
| # downstream |
| self.dataplane.send(olt_port, str(inPkt)) |
| verify_packet(self, inPkt, onu_port) |
| |
| # clean up the test |
| delete_all_flows(self.controller) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| class TestMulticastForwarding(IGMPPacketIn): |
| |
| def runTest(self): |
| delete_all_groups(self.controller) |
| # send igmp join packet |
| super(TestMulticastForwarding, self).runTest() |
| |
| vlan_id = 201 |
| |
| group = createAllGroupAdd(1, onu_port) |
| |
| self.controller.message_send(group_add) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # Create a flow rule matching olt port and vlan id |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.in_port(olt_port)) |
| match.oxm_list.append(ofp.oxm.vlan_vid(ofp.OFPVID_PRESENT | vlan_id)) |
| |
| request = ofp.message.flow_add( |
| table_id=test_param_get("table", 0), |
| cookie=43, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ofp.action.group(group_id=1)]), |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, priority=1000) |
| |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| # It takes some time for flows to propagate down to the data plane |
| time.sleep(5) |
| |
| pkt = simple_udp_packet(dl_vlan_enable=True, vlan_vid=vlan_id, vlan_pcp=0, \ |
| eth_dst = "01:00:5E:00:00:01", ip_dst = "229.10.20.30") |
| |
| # downstream |
| self.dataplane.send(olt_port, str(pkt)) |
| verify_packet(self, pkt, onu_port) |
| |
| # clean up the test |
| delete_all_flows(self.controller) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| delete_all_groups(self.controller) |
| |
| |
| class RemoveRuleTest(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Testing Rule removal") |
| delete_all_flows(self.controller) |
| self.processEapolRule(onu_port) |
| |
| #wait for the rule to settle |
| time.sleep(3) |
| |
| self.installDoubleTaggingRules(1, 2) |
| |
| #wait for the rules to settle |
| time.sleep(3) |
| |
| stats = get_flow_stats(self, ofp.match()) |
| |
| self.assertTrue(len(stats) == 5, \ |
| "Wrong number of rules reports; reported %s, expected 5\n\n %s" % (len(stats), stats)) |
| |
| self.processEapolRule(onu_port, install = False) |
| time.sleep(3) |
| |
| stats = get_flow_stats(self, ofp.match()) |
| |
| self.assertTrue(len(stats) == 4, \ |
| "Wrong number of rules reports; reported %s, expected 4\n\n %s" % (len(stats), stats)) |
| |
| eapol = ofp.oxm.eth_type(0x888e) |
| found = False |
| for fe in stats: |
| if eapol in fe.match.oxm_list: |
| found = True |
| |
| self.assertFalse(found, "Removed incorrect flow rule") |
| |
| |
| class MultipleDoubleTaggingForwarding(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Testing multiple Q-in-Q rules") |
| |
| self.installDoubleTaggingRules(10, 5, cookie=42, onu = onu_port) |
| |
| time.sleep(5) |
| |
| self.installDoubleTaggingRules(20, 10, cookie=50, onu = onu_port2) |
| |
| time.sleep(5) |
| |
| self.testPacketFlow(10, 5, onu=onu_port) |
| self.testPacketFlow(20, 10, onu=onu_port2) |
| |
| pass |
| |
| |
| class DoubleVlanTest(OltBaseTest): |
| |
| def runTest(self): |
| logging.info("Running double vlan tests") |
| delete_all_flows(self.controller) |
| |
| c_vlan_id = 100 |
| s_vlan_id = 102 |
| |
| self.installDoubleTaggingRules(s_vlan_id, c_vlan_id) |
| |
| # It takes some time for flows to propagate down to the data plane |
| time.sleep(10) |
| |
| # Test packet flows |
| self.testPacketFlow(s_vlan_id, c_vlan_id) |
| |
| # clean up the test |
| delete_all_flows(self.controller) |
| do_barrier(self.controller) |
| verify_no_errors(self.controller) |
| |
| |
| class TestCyclingDoubleVlan(OltBaseTest): |
| """Cycle through vlans and test traffic flow""" |
| |
| def runTest(self): |
| logging.info("Running cycling vlan test") |
| |
| for stag in xrange(2, 4000, 100): |
| for ctag in xrange(2, 4000, 100): |
| delete_all_flows(self.controller) |
| time.sleep(5) |
| self.installDoubleTaggingRules(stag, ctag) |
| time.sleep(5) |
| self.testPacketFlow(stag, ctag) |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |