Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1 | """ |
| 2 | Description: This test is to determine if ONOS can handle |
| 3 | a minority of it's nodes restarting |
| 4 | |
| 5 | List of test cases: |
| 6 | CASE1: Compile ONOS and push it to the test machines |
| 7 | CASE2: Assign devices to controllers |
| 8 | CASE21: Assign mastership to controllers |
| 9 | CASE3: Assign intents |
| 10 | CASE4: Ping across added host intents |
| 11 | CASE5: Reading state of ONOS |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 12 | CASE61: The Failure inducing case. |
| 13 | CASE62: The Failure recovery case. |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 14 | CASE7: Check state after control plane failure |
| 15 | CASE8: Compare topo |
| 16 | CASE9: Link s3-s28 down |
| 17 | CASE10: Link s3-s28 up |
| 18 | CASE11: Switch down |
| 19 | CASE12: Switch up |
| 20 | CASE13: Clean up |
| 21 | CASE14: start election app on all onos nodes |
| 22 | CASE15: Check that Leadership Election is still functional |
| 23 | CASE16: Install Distributed Primitives app |
| 24 | CASE17: Check for basic functionality with distributed primitives |
| 25 | """ |
| 26 | |
| 27 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 28 | class HAstopNodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 29 | |
| 30 | def __init__( self ): |
| 31 | self.default = '' |
| 32 | |
| 33 | def CASE1( self, main ): |
| 34 | """ |
| 35 | CASE1 is to compile ONOS and push it to the test machines |
| 36 | |
| 37 | Startup sequence: |
| 38 | cell <name> |
| 39 | onos-verify-cell |
| 40 | NOTE: temporary - onos-remove-raft-logs |
| 41 | onos-uninstall |
| 42 | start mininet |
| 43 | git pull |
| 44 | mvn clean install |
| 45 | onos-package |
| 46 | onos-install -f |
| 47 | onos-wait-for-start |
| 48 | start cli sessions |
| 49 | start tcpdump |
| 50 | """ |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 51 | import imp |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 52 | import pexpect |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 53 | main.log.info( "ONOS HA test: Stop a minority of ONOS nodes - " + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 54 | "initialization" ) |
| 55 | main.case( "Setting up test environment" ) |
Jon Hall | 783bbf9 | 2015-07-23 14:33:19 -0700 | [diff] [blame] | 56 | main.caseExplanation = "Setup the test environment including " +\ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 57 | "installing ONOS, starting Mininet and ONOS" +\ |
| 58 | "cli sessions." |
| 59 | # TODO: save all the timers and output them for plotting |
| 60 | |
| 61 | # load some variables from the params file |
| 62 | PULLCODE = False |
| 63 | if main.params[ 'Git' ] == 'True': |
| 64 | PULLCODE = True |
| 65 | gitBranch = main.params[ 'branch' ] |
| 66 | cellName = main.params[ 'ENV' ][ 'cellName' ] |
| 67 | |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 68 | main.numCtrls = int( main.params[ 'num_controllers' ] ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 69 | if main.ONOSbench.maxNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 70 | if main.ONOSbench.maxNodes < main.numCtrls: |
| 71 | main.numCtrls = int( main.ONOSbench.maxNodes ) |
| 72 | # set global variables |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 73 | global ONOS1Port |
| 74 | global ONOS2Port |
| 75 | global ONOS3Port |
| 76 | global ONOS4Port |
| 77 | global ONOS5Port |
| 78 | global ONOS6Port |
| 79 | global ONOS7Port |
| 80 | |
| 81 | # FIXME: just get controller port from params? |
| 82 | # TODO: do we really need all these? |
| 83 | ONOS1Port = main.params[ 'CTRL' ][ 'port1' ] |
| 84 | ONOS2Port = main.params[ 'CTRL' ][ 'port2' ] |
| 85 | ONOS3Port = main.params[ 'CTRL' ][ 'port3' ] |
| 86 | ONOS4Port = main.params[ 'CTRL' ][ 'port4' ] |
| 87 | ONOS5Port = main.params[ 'CTRL' ][ 'port5' ] |
| 88 | ONOS6Port = main.params[ 'CTRL' ][ 'port6' ] |
| 89 | ONOS7Port = main.params[ 'CTRL' ][ 'port7' ] |
| 90 | |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 91 | try: |
| 92 | fileName = "Counters" |
| 93 | # TODO: Maybe make a library folder somewhere? |
| 94 | path = main.params[ 'imports' ][ 'path' ] |
| 95 | main.Counters = imp.load_source( fileName, |
| 96 | path + fileName + ".py" ) |
| 97 | except Exception as e: |
| 98 | main.log.exception( e ) |
| 99 | main.cleanup() |
| 100 | main.exit() |
| 101 | |
| 102 | main.CLIs = [] |
| 103 | main.nodes = [] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 104 | ipList = [] |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 105 | for i in range( 1, main.numCtrls + 1 ): |
| 106 | try: |
| 107 | main.CLIs.append( getattr( main, 'ONOScli' + str( i ) ) ) |
| 108 | main.nodes.append( getattr( main, 'ONOS' + str( i ) ) ) |
| 109 | ipList.append( main.nodes[ -1 ].ip_address ) |
| 110 | except AttributeError: |
| 111 | break |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 112 | |
| 113 | main.step( "Create cell file" ) |
| 114 | cellAppString = main.params[ 'ENV' ][ 'appString' ] |
| 115 | main.ONOSbench.createCellFile( main.ONOSbench.ip_address, cellName, |
| 116 | main.Mininet1.ip_address, |
| 117 | cellAppString, ipList ) |
| 118 | main.step( "Applying cell variable to environment" ) |
| 119 | cellResult = main.ONOSbench.setCell( cellName ) |
| 120 | verifyResult = main.ONOSbench.verifyCell() |
| 121 | |
| 122 | # FIXME:this is short term fix |
| 123 | main.log.info( "Removing raft logs" ) |
| 124 | main.ONOSbench.onosRemoveRaftLogs() |
| 125 | |
| 126 | main.log.info( "Uninstalling ONOS" ) |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 127 | for node in main.nodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 128 | main.ONOSbench.onosUninstall( node.ip_address ) |
| 129 | |
| 130 | # Make sure ONOS is DEAD |
| 131 | main.log.info( "Killing any ONOS processes" ) |
| 132 | killResults = main.TRUE |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 133 | for node in main.nodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 134 | killed = main.ONOSbench.onosKill( node.ip_address ) |
| 135 | killResults = killResults and killed |
| 136 | |
| 137 | cleanInstallResult = main.TRUE |
| 138 | gitPullResult = main.TRUE |
| 139 | |
| 140 | main.step( "Starting Mininet" ) |
| 141 | # scp topo file to mininet |
| 142 | # TODO: move to params? |
| 143 | topoName = "obelisk.py" |
| 144 | filePath = main.ONOSbench.home + "/tools/test/topos/" |
kelvin-onlab | d9e23de | 2015-08-06 10:34:44 -0700 | [diff] [blame] | 145 | main.ONOSbench.scp( main.Mininet1, |
| 146 | filePath + topoName, |
| 147 | main.Mininet1.home, |
| 148 | direction="to" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 149 | mnResult = main.Mininet1.startNet( ) |
| 150 | utilities.assert_equals( expect=main.TRUE, actual=mnResult, |
| 151 | onpass="Mininet Started", |
| 152 | onfail="Error starting Mininet" ) |
| 153 | |
| 154 | main.step( "Git checkout and pull " + gitBranch ) |
| 155 | if PULLCODE: |
| 156 | main.ONOSbench.gitCheckout( gitBranch ) |
| 157 | gitPullResult = main.ONOSbench.gitPull() |
| 158 | # values of 1 or 3 are good |
| 159 | utilities.assert_lesser( expect=0, actual=gitPullResult, |
| 160 | onpass="Git pull successful", |
| 161 | onfail="Git pull failed" ) |
| 162 | main.ONOSbench.getVersion( report=True ) |
| 163 | |
| 164 | main.step( "Using mvn clean install" ) |
| 165 | cleanInstallResult = main.TRUE |
| 166 | if PULLCODE and gitPullResult == main.TRUE: |
| 167 | cleanInstallResult = main.ONOSbench.cleanInstall() |
| 168 | else: |
| 169 | main.log.warn( "Did not pull new code so skipping mvn " + |
| 170 | "clean install" ) |
| 171 | utilities.assert_equals( expect=main.TRUE, |
| 172 | actual=cleanInstallResult, |
| 173 | onpass="MCI successful", |
| 174 | onfail="MCI failed" ) |
| 175 | # GRAPHS |
| 176 | # NOTE: important params here: |
| 177 | # job = name of Jenkins job |
| 178 | # Plot Name = Plot-HA, only can be used if multiple plots |
| 179 | # index = The number of the graph under plot name |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 180 | job = "HAstopNodes" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 181 | plotName = "Plot-HA" |
| 182 | graphs = '<ac:structured-macro ac:name="html">\n' |
| 183 | graphs += '<ac:plain-text-body><![CDATA[\n' |
| 184 | graphs += '<iframe src="https://onos-jenkins.onlab.us/job/' + job +\ |
| 185 | '/plot/' + plotName + '/getPlot?index=0' +\ |
| 186 | '&width=500&height=300"' +\ |
| 187 | 'noborder="0" width="500" height="300" scrolling="yes" ' +\ |
| 188 | 'seamless="seamless"></iframe>\n' |
| 189 | graphs += ']]></ac:plain-text-body>\n' |
| 190 | graphs += '</ac:structured-macro>\n' |
| 191 | main.log.wiki(graphs) |
| 192 | |
| 193 | main.step( "Creating ONOS package" ) |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 194 | # copy gen-partions file to ONOS |
| 195 | # NOTE: this assumes TestON and ONOS are on the same machine |
| 196 | srcFile = main.testDir + "/" + main.TEST + "/dependencies/onos-gen-partitions" |
| 197 | dstDir = main.ONOSbench.home + "/tools/test/bin/onos-gen-partitions" |
| 198 | cpResult = main.ONOSbench.secureCopy( main.ONOSbench.user_name, |
| 199 | main.ONOSbench.ip_address, |
| 200 | srcFile, |
| 201 | dstDir, |
| 202 | pwd=main.ONOSbench.pwd, |
| 203 | direction="from" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 204 | packageResult = main.ONOSbench.onosPackage() |
| 205 | utilities.assert_equals( expect=main.TRUE, actual=packageResult, |
| 206 | onpass="ONOS package successful", |
| 207 | onfail="ONOS package failed" ) |
| 208 | |
| 209 | main.step( "Installing ONOS package" ) |
| 210 | onosInstallResult = main.TRUE |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 211 | for node in main.nodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 212 | tmpResult = main.ONOSbench.onosInstall( options="-f", |
| 213 | node=node.ip_address ) |
| 214 | onosInstallResult = onosInstallResult and tmpResult |
| 215 | utilities.assert_equals( expect=main.TRUE, actual=onosInstallResult, |
| 216 | onpass="ONOS install successful", |
| 217 | onfail="ONOS install failed" ) |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 218 | # clean up gen-partitions file |
| 219 | try: |
| 220 | main.ONOSbench.handle.sendline( "cd " + main.ONOSbench.home ) |
| 221 | main.ONOSbench.handle.expect( main.ONOSbench.home + "\$" ) |
| 222 | main.ONOSbench.handle.sendline( "git checkout -- tools/test/bin/onos-gen-partitions" ) |
| 223 | main.ONOSbench.handle.expect( main.ONOSbench.home + "\$" ) |
| 224 | main.log.info( " Cleaning custom gen partitions file, response was: \n" + |
| 225 | str( main.ONOSbench.handle.before ) ) |
| 226 | except ( pexpect.TIMEOUT, pexpect.EOF ): |
| 227 | main.log.exception( "ONOSbench: pexpect exception found:" + |
| 228 | main.ONOSbench.handle.before ) |
| 229 | main.cleanup() |
| 230 | main.exit() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 231 | |
| 232 | main.step( "Checking if ONOS is up yet" ) |
| 233 | for i in range( 2 ): |
| 234 | onosIsupResult = main.TRUE |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 235 | for node in main.nodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 236 | started = main.ONOSbench.isup( node.ip_address ) |
| 237 | if not started: |
| 238 | main.log.error( node.name + " didn't start!" ) |
| 239 | main.ONOSbench.onosStop( node.ip_address ) |
| 240 | main.ONOSbench.onosStart( node.ip_address ) |
| 241 | onosIsupResult = onosIsupResult and started |
| 242 | if onosIsupResult == main.TRUE: |
| 243 | break |
| 244 | utilities.assert_equals( expect=main.TRUE, actual=onosIsupResult, |
| 245 | onpass="ONOS startup successful", |
| 246 | onfail="ONOS startup failed" ) |
| 247 | |
| 248 | main.log.step( "Starting ONOS CLI sessions" ) |
| 249 | cliResults = main.TRUE |
| 250 | threads = [] |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 251 | for i in range( main.numCtrls ): |
| 252 | t = main.Thread( target=main.CLIs[i].startOnosCli, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 253 | name="startOnosCli-" + str( i ), |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 254 | args=[main.nodes[i].ip_address] ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 255 | threads.append( t ) |
| 256 | t.start() |
| 257 | |
| 258 | for t in threads: |
| 259 | t.join() |
| 260 | cliResults = cliResults and t.result |
| 261 | utilities.assert_equals( expect=main.TRUE, actual=cliResults, |
| 262 | onpass="ONOS cli startup successful", |
| 263 | onfail="ONOS cli startup failed" ) |
| 264 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 265 | # Create a list of active nodes for use when some nodes are stopped |
| 266 | main.activeNodes = [ i for i in range( 0, len( main.CLIs ) ) ] |
| 267 | |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 268 | if main.params[ 'tcpdump' ].lower() == "true": |
| 269 | main.step( "Start Packet Capture MN" ) |
| 270 | main.Mininet2.startTcpdump( |
| 271 | str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST ) |
| 272 | + "-MN.pcap", |
| 273 | intf=main.params[ 'MNtcpdump' ][ 'intf' ], |
| 274 | port=main.params[ 'MNtcpdump' ][ 'port' ] ) |
| 275 | |
| 276 | main.step( "App Ids check" ) |
| 277 | appCheck = main.TRUE |
| 278 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 279 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 280 | t = main.Thread( target=main.CLIs[i].appToIDCheck, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 281 | name="appToIDCheck-" + str( i ), |
| 282 | args=[] ) |
| 283 | threads.append( t ) |
| 284 | t.start() |
| 285 | |
| 286 | for t in threads: |
| 287 | t.join() |
| 288 | appCheck = appCheck and t.result |
| 289 | if appCheck != main.TRUE: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 290 | node = main.activeNodes[0] |
| 291 | main.log.warn( main.CLIs[node].apps() ) |
| 292 | main.log.warn( main.CLIs[node].appIDs() ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 293 | utilities.assert_equals( expect=main.TRUE, actual=appCheck, |
| 294 | onpass="App Ids seem to be correct", |
| 295 | onfail="Something is wrong with app Ids" ) |
| 296 | |
| 297 | if cliResults == main.FALSE: |
| 298 | main.log.error( "Failed to start ONOS, stopping test" ) |
| 299 | main.cleanup() |
| 300 | main.exit() |
| 301 | |
| 302 | def CASE2( self, main ): |
| 303 | """ |
| 304 | Assign devices to controllers |
| 305 | """ |
| 306 | import re |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 307 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 308 | assert main, "main not defined" |
| 309 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 310 | assert main.CLIs, "main.CLIs not defined" |
| 311 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 312 | assert ONOS1Port, "ONOS1Port not defined" |
| 313 | assert ONOS2Port, "ONOS2Port not defined" |
| 314 | assert ONOS3Port, "ONOS3Port not defined" |
| 315 | assert ONOS4Port, "ONOS4Port not defined" |
| 316 | assert ONOS5Port, "ONOS5Port not defined" |
| 317 | assert ONOS6Port, "ONOS6Port not defined" |
| 318 | assert ONOS7Port, "ONOS7Port not defined" |
| 319 | |
| 320 | main.case( "Assigning devices to controllers" ) |
Jon Hall | 783bbf9 | 2015-07-23 14:33:19 -0700 | [diff] [blame] | 321 | main.caseExplanation = "Assign switches to ONOS using 'ovs-vsctl' " +\ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 322 | "and check that an ONOS node becomes the " +\ |
| 323 | "master of the device." |
| 324 | main.step( "Assign switches to controllers" ) |
| 325 | |
| 326 | ipList = [] |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 327 | for i in range( main.numCtrls ): |
| 328 | ipList.append( main.nodes[ i ].ip_address ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 329 | swList = [] |
| 330 | for i in range( 1, 29 ): |
| 331 | swList.append( "s" + str( i ) ) |
| 332 | main.Mininet1.assignSwController( sw=swList, ip=ipList ) |
| 333 | |
| 334 | mastershipCheck = main.TRUE |
| 335 | for i in range( 1, 29 ): |
| 336 | response = main.Mininet1.getSwController( "s" + str( i ) ) |
| 337 | try: |
| 338 | main.log.info( str( response ) ) |
| 339 | except Exception: |
| 340 | main.log.info( repr( response ) ) |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 341 | for node in main.nodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 342 | if re.search( "tcp:" + node.ip_address, response ): |
| 343 | mastershipCheck = mastershipCheck and main.TRUE |
| 344 | else: |
| 345 | main.log.error( "Error, node " + node.ip_address + " is " + |
| 346 | "not in the list of controllers s" + |
| 347 | str( i ) + " is connecting to." ) |
| 348 | mastershipCheck = main.FALSE |
| 349 | utilities.assert_equals( |
| 350 | expect=main.TRUE, |
| 351 | actual=mastershipCheck, |
| 352 | onpass="Switch mastership assigned correctly", |
| 353 | onfail="Switches not assigned correctly to controllers" ) |
| 354 | |
| 355 | def CASE21( self, main ): |
| 356 | """ |
| 357 | Assign mastership to controllers |
| 358 | """ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 359 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 360 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 361 | assert main, "main not defined" |
| 362 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 363 | assert main.CLIs, "main.CLIs not defined" |
| 364 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 365 | assert ONOS1Port, "ONOS1Port not defined" |
| 366 | assert ONOS2Port, "ONOS2Port not defined" |
| 367 | assert ONOS3Port, "ONOS3Port not defined" |
| 368 | assert ONOS4Port, "ONOS4Port not defined" |
| 369 | assert ONOS5Port, "ONOS5Port not defined" |
| 370 | assert ONOS6Port, "ONOS6Port not defined" |
| 371 | assert ONOS7Port, "ONOS7Port not defined" |
| 372 | |
| 373 | main.case( "Assigning Controller roles for switches" ) |
Jon Hall | 783bbf9 | 2015-07-23 14:33:19 -0700 | [diff] [blame] | 374 | main.caseExplanation = "Check that ONOS is connected to each " +\ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 375 | "device. Then manually assign" +\ |
| 376 | " mastership to specific ONOS nodes using" +\ |
| 377 | " 'device-role'" |
| 378 | main.step( "Assign mastership of switches to specific controllers" ) |
| 379 | # Manually assign mastership to the controller we want |
| 380 | roleCall = main.TRUE |
| 381 | |
| 382 | ipList = [ ] |
| 383 | deviceList = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 384 | onosCli = main.CLIs[ main.activeNodes[0] ] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 385 | try: |
| 386 | # Assign mastership to specific controllers. This assignment was |
| 387 | # determined for a 7 node cluser, but will work with any sized |
| 388 | # cluster |
| 389 | for i in range( 1, 29 ): # switches 1 through 28 |
| 390 | # set up correct variables: |
| 391 | if i == 1: |
| 392 | c = 0 |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 393 | ip = main.nodes[ c ].ip_address # ONOS1 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 394 | deviceId = onosCli.getDevice( "1000" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 395 | elif i == 2: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 396 | c = 1 % main.numCtrls |
| 397 | ip = main.nodes[ c ].ip_address # ONOS2 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 398 | deviceId = onosCli.getDevice( "2000" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 399 | elif i == 3: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 400 | c = 1 % main.numCtrls |
| 401 | ip = main.nodes[ c ].ip_address # ONOS2 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 402 | deviceId = onosCli.getDevice( "3000" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 403 | elif i == 4: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 404 | c = 3 % main.numCtrls |
| 405 | ip = main.nodes[ c ].ip_address # ONOS4 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 406 | deviceId = onosCli.getDevice( "3004" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 407 | elif i == 5: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 408 | c = 2 % main.numCtrls |
| 409 | ip = main.nodes[ c ].ip_address # ONOS3 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 410 | deviceId = onosCli.getDevice( "5000" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 411 | elif i == 6: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 412 | c = 2 % main.numCtrls |
| 413 | ip = main.nodes[ c ].ip_address # ONOS3 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 414 | deviceId = onosCli.getDevice( "6000" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 415 | elif i == 7: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 416 | c = 5 % main.numCtrls |
| 417 | ip = main.nodes[ c ].ip_address # ONOS6 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 418 | deviceId = onosCli.getDevice( "6007" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 419 | elif i >= 8 and i <= 17: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 420 | c = 4 % main.numCtrls |
| 421 | ip = main.nodes[ c ].ip_address # ONOS5 |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 422 | dpid = '3' + str( i ).zfill( 3 ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 423 | deviceId = onosCli.getDevice( dpid ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 424 | elif i >= 18 and i <= 27: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 425 | c = 6 % main.numCtrls |
| 426 | ip = main.nodes[ c ].ip_address # ONOS7 |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 427 | dpid = '6' + str( i ).zfill( 3 ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 428 | deviceId = onosCli.getDevice( dpid ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 429 | elif i == 28: |
| 430 | c = 0 |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 431 | ip = main.nodes[ c ].ip_address # ONOS1 |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 432 | deviceId = onosCli.getDevice( "2800" ).get( 'id' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 433 | else: |
| 434 | main.log.error( "You didn't write an else statement for " + |
| 435 | "switch s" + str( i ) ) |
| 436 | roleCall = main.FALSE |
| 437 | # Assign switch |
| 438 | assert deviceId, "No device id for s" + str( i ) + " in ONOS" |
| 439 | # TODO: make this controller dynamic |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 440 | roleCall = roleCall and onosCli.deviceRole( deviceId, ip ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 441 | ipList.append( ip ) |
| 442 | deviceList.append( deviceId ) |
| 443 | except ( AttributeError, AssertionError ): |
| 444 | main.log.exception( "Something is wrong with ONOS device view" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 445 | main.log.info( onosCli.devices() ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 446 | utilities.assert_equals( |
| 447 | expect=main.TRUE, |
| 448 | actual=roleCall, |
| 449 | onpass="Re-assigned switch mastership to designated controller", |
| 450 | onfail="Something wrong with deviceRole calls" ) |
| 451 | |
| 452 | main.step( "Check mastership was correctly assigned" ) |
| 453 | roleCheck = main.TRUE |
| 454 | # NOTE: This is due to the fact that device mastership change is not |
| 455 | # atomic and is actually a multi step process |
| 456 | time.sleep( 5 ) |
| 457 | for i in range( len( ipList ) ): |
| 458 | ip = ipList[i] |
| 459 | deviceId = deviceList[i] |
| 460 | # Check assignment |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 461 | master = onosCli.getRole( deviceId ).get( 'master' ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 462 | if ip in master: |
| 463 | roleCheck = roleCheck and main.TRUE |
| 464 | else: |
| 465 | roleCheck = roleCheck and main.FALSE |
| 466 | main.log.error( "Error, controller " + ip + " is not" + |
| 467 | " master " + "of device " + |
| 468 | str( deviceId ) + ". Master is " + |
| 469 | repr( master ) + "." ) |
| 470 | utilities.assert_equals( |
| 471 | expect=main.TRUE, |
| 472 | actual=roleCheck, |
| 473 | onpass="Switches were successfully reassigned to designated " + |
| 474 | "controller", |
| 475 | onfail="Switches were not successfully reassigned" ) |
| 476 | |
| 477 | def CASE3( self, main ): |
| 478 | """ |
| 479 | Assign intents |
| 480 | """ |
| 481 | import time |
| 482 | import json |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 483 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 484 | assert main, "main not defined" |
| 485 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 486 | assert main.CLIs, "main.CLIs not defined" |
| 487 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 488 | main.case( "Adding host Intents" ) |
Jon Hall | 783bbf9 | 2015-07-23 14:33:19 -0700 | [diff] [blame] | 489 | main.caseExplanation = "Discover hosts by using pingall then " +\ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 490 | "assign predetermined host-to-host intents." +\ |
| 491 | " After installation, check that the intent" +\ |
| 492 | " is distributed to all nodes and the state" +\ |
| 493 | " is INSTALLED" |
| 494 | |
| 495 | # install onos-app-fwd |
| 496 | main.step( "Install reactive forwarding app" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 497 | onosCli = main.CLIs[ main.activeNodes[0] ] |
| 498 | installResults = onosCli.activateApp( "org.onosproject.fwd" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 499 | utilities.assert_equals( expect=main.TRUE, actual=installResults, |
| 500 | onpass="Install fwd successful", |
| 501 | onfail="Install fwd failed" ) |
| 502 | |
| 503 | main.step( "Check app ids" ) |
| 504 | appCheck = main.TRUE |
| 505 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 506 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 507 | t = main.Thread( target=main.CLIs[i].appToIDCheck, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 508 | name="appToIDCheck-" + str( i ), |
| 509 | args=[] ) |
| 510 | threads.append( t ) |
| 511 | t.start() |
| 512 | |
| 513 | for t in threads: |
| 514 | t.join() |
| 515 | appCheck = appCheck and t.result |
| 516 | if appCheck != main.TRUE: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 517 | main.log.warn( onosCli.apps() ) |
| 518 | main.log.warn( onosCli.appIDs() ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 519 | utilities.assert_equals( expect=main.TRUE, actual=appCheck, |
| 520 | onpass="App Ids seem to be correct", |
| 521 | onfail="Something is wrong with app Ids" ) |
| 522 | |
| 523 | main.step( "Discovering Hosts( Via pingall for now )" ) |
| 524 | # FIXME: Once we have a host discovery mechanism, use that instead |
| 525 | # REACTIVE FWD test |
| 526 | pingResult = main.FALSE |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 527 | passMsg = "Reactive Pingall test passed" |
| 528 | time1 = time.time() |
| 529 | pingResult = main.Mininet1.pingall() |
| 530 | time2 = time.time() |
| 531 | if not pingResult: |
| 532 | main.log.warn("First pingall failed. Trying again...") |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 533 | pingResult = main.Mininet1.pingall() |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 534 | passMsg += " on the second try" |
| 535 | utilities.assert_equals( |
| 536 | expect=main.TRUE, |
| 537 | actual=pingResult, |
| 538 | onpass= passMsg, |
| 539 | onfail="Reactive Pingall failed, " + |
| 540 | "one or more ping pairs failed" ) |
| 541 | main.log.info( "Time for pingall: %2f seconds" % |
| 542 | ( time2 - time1 ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 543 | # timeout for fwd flows |
| 544 | time.sleep( 11 ) |
| 545 | # uninstall onos-app-fwd |
| 546 | main.step( "Uninstall reactive forwarding app" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 547 | node = main.activeNodes[0] |
| 548 | uninstallResult = main.CLIs[node].deactivateApp( "org.onosproject.fwd" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 549 | utilities.assert_equals( expect=main.TRUE, actual=uninstallResult, |
| 550 | onpass="Uninstall fwd successful", |
| 551 | onfail="Uninstall fwd failed" ) |
| 552 | |
| 553 | main.step( "Check app ids" ) |
| 554 | threads = [] |
| 555 | appCheck2 = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 556 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 557 | t = main.Thread( target=main.CLIs[i].appToIDCheck, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 558 | name="appToIDCheck-" + str( i ), |
| 559 | args=[] ) |
| 560 | threads.append( t ) |
| 561 | t.start() |
| 562 | |
| 563 | for t in threads: |
| 564 | t.join() |
| 565 | appCheck2 = appCheck2 and t.result |
| 566 | if appCheck2 != main.TRUE: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 567 | node = main.activeNodes[0] |
| 568 | main.log.warn( main.CLIs[node].apps() ) |
| 569 | main.log.warn( main.CLIs[node].appIDs() ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 570 | utilities.assert_equals( expect=main.TRUE, actual=appCheck2, |
| 571 | onpass="App Ids seem to be correct", |
| 572 | onfail="Something is wrong with app Ids" ) |
| 573 | |
| 574 | main.step( "Add host intents via cli" ) |
| 575 | intentIds = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 576 | # TODO: move the host numbers to params |
| 577 | # Maybe look at all the paths we ping? |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 578 | intentAddResult = True |
| 579 | hostResult = main.TRUE |
| 580 | for i in range( 8, 18 ): |
| 581 | main.log.info( "Adding host intent between h" + str( i ) + |
| 582 | " and h" + str( i + 10 ) ) |
| 583 | host1 = "00:00:00:00:00:" + \ |
| 584 | str( hex( i )[ 2: ] ).zfill( 2 ).upper() |
| 585 | host2 = "00:00:00:00:00:" + \ |
| 586 | str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper() |
| 587 | # NOTE: getHost can return None |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 588 | host1Dict = onosCli.getHost( host1 ) |
| 589 | host2Dict = onosCli.getHost( host2 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 590 | host1Id = None |
| 591 | host2Id = None |
| 592 | if host1Dict and host2Dict: |
| 593 | host1Id = host1Dict.get( 'id', None ) |
| 594 | host2Id = host2Dict.get( 'id', None ) |
| 595 | if host1Id and host2Id: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 596 | nodeNum = ( i % len( main.activeNodes ) ) |
| 597 | node = main.activeNodes[nodeNum] |
| 598 | tmpId = main.CLIs[node].addHostIntent( host1Id, host2Id ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 599 | if tmpId: |
| 600 | main.log.info( "Added intent with id: " + tmpId ) |
| 601 | intentIds.append( tmpId ) |
| 602 | else: |
| 603 | main.log.error( "addHostIntent returned: " + |
| 604 | repr( tmpId ) ) |
| 605 | else: |
| 606 | main.log.error( "Error, getHost() failed for h" + str( i ) + |
| 607 | " and/or h" + str( i + 10 ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 608 | node = main.activeNodes[0] |
| 609 | hosts = main.CLIs[node].hosts() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 610 | main.log.warn( "Hosts output: " ) |
| 611 | try: |
| 612 | main.log.warn( json.dumps( json.loads( hosts ), |
| 613 | sort_keys=True, |
| 614 | indent=4, |
| 615 | separators=( ',', ': ' ) ) ) |
| 616 | except ( ValueError, TypeError ): |
| 617 | main.log.warn( repr( hosts ) ) |
| 618 | hostResult = main.FALSE |
| 619 | utilities.assert_equals( expect=main.TRUE, actual=hostResult, |
| 620 | onpass="Found a host id for each host", |
| 621 | onfail="Error looking up host ids" ) |
| 622 | |
| 623 | intentStart = time.time() |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 624 | onosIds = onosCli.getAllIntentsId() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 625 | main.log.info( "Submitted intents: " + str( intentIds ) ) |
| 626 | main.log.info( "Intents in ONOS: " + str( onosIds ) ) |
| 627 | for intent in intentIds: |
| 628 | if intent in onosIds: |
| 629 | pass # intent submitted is in onos |
| 630 | else: |
| 631 | intentAddResult = False |
| 632 | if intentAddResult: |
| 633 | intentStop = time.time() |
| 634 | else: |
| 635 | intentStop = None |
| 636 | # Print the intent states |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 637 | intents = onosCli.intents() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 638 | intentStates = [] |
| 639 | installedCheck = True |
| 640 | main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| 641 | count = 0 |
| 642 | try: |
| 643 | for intent in json.loads( intents ): |
| 644 | state = intent.get( 'state', None ) |
| 645 | if "INSTALLED" not in state: |
| 646 | installedCheck = False |
| 647 | intentId = intent.get( 'id', None ) |
| 648 | intentStates.append( ( intentId, state ) ) |
| 649 | except ( ValueError, TypeError ): |
| 650 | main.log.exception( "Error parsing intents" ) |
| 651 | # add submitted intents not in the store |
| 652 | tmplist = [ i for i, s in intentStates ] |
| 653 | missingIntents = False |
| 654 | for i in intentIds: |
| 655 | if i not in tmplist: |
| 656 | intentStates.append( ( i, " - " ) ) |
| 657 | missingIntents = True |
| 658 | intentStates.sort() |
| 659 | for i, s in intentStates: |
| 660 | count += 1 |
| 661 | main.log.info( "%-6s%-15s%-15s" % |
| 662 | ( str( count ), str( i ), str( s ) ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 663 | leaders = onosCli.leaders() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 664 | try: |
| 665 | missing = False |
| 666 | if leaders: |
| 667 | parsedLeaders = json.loads( leaders ) |
| 668 | main.log.warn( json.dumps( parsedLeaders, |
| 669 | sort_keys=True, |
| 670 | indent=4, |
| 671 | separators=( ',', ': ' ) ) ) |
| 672 | # check for all intent partitions |
| 673 | topics = [] |
| 674 | for i in range( 14 ): |
| 675 | topics.append( "intent-partition-" + str( i ) ) |
| 676 | main.log.debug( topics ) |
| 677 | ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| 678 | for topic in topics: |
| 679 | if topic not in ONOStopics: |
| 680 | main.log.error( "Error: " + topic + |
| 681 | " not in leaders" ) |
| 682 | missing = True |
| 683 | else: |
| 684 | main.log.error( "leaders() returned None" ) |
| 685 | except ( ValueError, TypeError ): |
| 686 | main.log.exception( "Error parsing leaders" ) |
| 687 | main.log.error( repr( leaders ) ) |
| 688 | # Check all nodes |
| 689 | if missing: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 690 | for i in main.activeNodes: |
| 691 | response = main.CLIs[i].leaders( jsonFormat=False) |
| 692 | main.log.warn( str( main.CLIs[i].name ) + " leaders output: \n" + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 693 | str( response ) ) |
| 694 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 695 | partitions = onosCli.partitions() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 696 | try: |
| 697 | if partitions : |
| 698 | parsedPartitions = json.loads( partitions ) |
| 699 | main.log.warn( json.dumps( parsedPartitions, |
| 700 | sort_keys=True, |
| 701 | indent=4, |
| 702 | separators=( ',', ': ' ) ) ) |
| 703 | # TODO check for a leader in all paritions |
| 704 | # TODO check for consistency among nodes |
| 705 | else: |
| 706 | main.log.error( "partitions() returned None" ) |
| 707 | except ( ValueError, TypeError ): |
| 708 | main.log.exception( "Error parsing partitions" ) |
| 709 | main.log.error( repr( partitions ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 710 | pendingMap = onosCli.pendingMap() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 711 | try: |
| 712 | if pendingMap : |
| 713 | parsedPending = json.loads( pendingMap ) |
| 714 | main.log.warn( json.dumps( parsedPending, |
| 715 | sort_keys=True, |
| 716 | indent=4, |
| 717 | separators=( ',', ': ' ) ) ) |
| 718 | # TODO check something here? |
| 719 | else: |
| 720 | main.log.error( "pendingMap() returned None" ) |
| 721 | except ( ValueError, TypeError ): |
| 722 | main.log.exception( "Error parsing pending map" ) |
| 723 | main.log.error( repr( pendingMap ) ) |
| 724 | |
| 725 | intentAddResult = bool( intentAddResult and not missingIntents and |
| 726 | installedCheck ) |
| 727 | if not intentAddResult: |
| 728 | main.log.error( "Error in pushing host intents to ONOS" ) |
| 729 | |
| 730 | main.step( "Intent Anti-Entropy dispersion" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 731 | for j in range(100): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 732 | correct = True |
| 733 | main.log.info( "Submitted intents: " + str( sorted( intentIds ) ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 734 | for i in main.activeNodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 735 | onosIds = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 736 | ids = main.CLIs[i].getAllIntentsId() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 737 | onosIds.append( ids ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 738 | main.log.debug( "Intents in " + main.CLIs[i].name + ": " + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 739 | str( sorted( onosIds ) ) ) |
| 740 | if sorted( ids ) != sorted( intentIds ): |
| 741 | main.log.warn( "Set of intent IDs doesn't match" ) |
| 742 | correct = False |
| 743 | break |
| 744 | else: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 745 | intents = json.loads( main.CLIs[i].intents() ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 746 | for intent in intents: |
| 747 | if intent[ 'state' ] != "INSTALLED": |
| 748 | main.log.warn( "Intent " + intent[ 'id' ] + |
| 749 | " is " + intent[ 'state' ] ) |
| 750 | correct = False |
| 751 | break |
| 752 | if correct: |
| 753 | break |
| 754 | else: |
| 755 | time.sleep(1) |
| 756 | if not intentStop: |
| 757 | intentStop = time.time() |
| 758 | global gossipTime |
| 759 | gossipTime = intentStop - intentStart |
| 760 | main.log.info( "It took about " + str( gossipTime ) + |
| 761 | " seconds for all intents to appear in each node" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 762 | gossipPeriod = int( main.params['timers']['gossip'] ) |
| 763 | maxGossipTime = gossipPeriod * len( main.activeNodes ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 764 | utilities.assert_greater_equals( |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 765 | expect=maxGossipTime, actual=gossipTime, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 766 | onpass="ECM anti-entropy for intents worked within " + |
| 767 | "expected time", |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 768 | onfail="Intent ECM anti-entropy took too long. " + |
| 769 | "Expected time:{}, Actual time:{}".format( maxGossipTime, |
| 770 | gossipTime ) ) |
| 771 | if gossipTime <= maxGossipTime: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 772 | intentAddResult = True |
| 773 | |
| 774 | if not intentAddResult or "key" in pendingMap: |
| 775 | import time |
| 776 | installedCheck = True |
| 777 | main.log.info( "Sleeping 60 seconds to see if intents are found" ) |
| 778 | time.sleep( 60 ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 779 | onosIds = onosCli.getAllIntentsId() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 780 | main.log.info( "Submitted intents: " + str( intentIds ) ) |
| 781 | main.log.info( "Intents in ONOS: " + str( onosIds ) ) |
| 782 | # Print the intent states |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 783 | intents = onosCli.intents() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 784 | intentStates = [] |
| 785 | main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| 786 | count = 0 |
| 787 | try: |
| 788 | for intent in json.loads( intents ): |
| 789 | # Iter through intents of a node |
| 790 | state = intent.get( 'state', None ) |
| 791 | if "INSTALLED" not in state: |
| 792 | installedCheck = False |
| 793 | intentId = intent.get( 'id', None ) |
| 794 | intentStates.append( ( intentId, state ) ) |
| 795 | except ( ValueError, TypeError ): |
| 796 | main.log.exception( "Error parsing intents" ) |
| 797 | # add submitted intents not in the store |
| 798 | tmplist = [ i for i, s in intentStates ] |
| 799 | for i in intentIds: |
| 800 | if i not in tmplist: |
| 801 | intentStates.append( ( i, " - " ) ) |
| 802 | intentStates.sort() |
| 803 | for i, s in intentStates: |
| 804 | count += 1 |
| 805 | main.log.info( "%-6s%-15s%-15s" % |
| 806 | ( str( count ), str( i ), str( s ) ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 807 | leaders = onosCli.leaders() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 808 | try: |
| 809 | missing = False |
| 810 | if leaders: |
| 811 | parsedLeaders = json.loads( leaders ) |
| 812 | main.log.warn( json.dumps( parsedLeaders, |
| 813 | sort_keys=True, |
| 814 | indent=4, |
| 815 | separators=( ',', ': ' ) ) ) |
| 816 | # check for all intent partitions |
| 817 | # check for election |
| 818 | topics = [] |
| 819 | for i in range( 14 ): |
| 820 | topics.append( "intent-partition-" + str( i ) ) |
| 821 | # FIXME: this should only be after we start the app |
| 822 | topics.append( "org.onosproject.election" ) |
| 823 | main.log.debug( topics ) |
| 824 | ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| 825 | for topic in topics: |
| 826 | if topic not in ONOStopics: |
| 827 | main.log.error( "Error: " + topic + |
| 828 | " not in leaders" ) |
| 829 | missing = True |
| 830 | else: |
| 831 | main.log.error( "leaders() returned None" ) |
| 832 | except ( ValueError, TypeError ): |
| 833 | main.log.exception( "Error parsing leaders" ) |
| 834 | main.log.error( repr( leaders ) ) |
| 835 | # Check all nodes |
| 836 | if missing: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 837 | for i in main.activeNodes: |
| 838 | node = main.CLIs[i] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 839 | response = node.leaders( jsonFormat=False) |
| 840 | main.log.warn( str( node.name ) + " leaders output: \n" + |
| 841 | str( response ) ) |
| 842 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 843 | partitions = onosCli.partitions() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 844 | try: |
| 845 | if partitions : |
| 846 | parsedPartitions = json.loads( partitions ) |
| 847 | main.log.warn( json.dumps( parsedPartitions, |
| 848 | sort_keys=True, |
| 849 | indent=4, |
| 850 | separators=( ',', ': ' ) ) ) |
| 851 | # TODO check for a leader in all paritions |
| 852 | # TODO check for consistency among nodes |
| 853 | else: |
| 854 | main.log.error( "partitions() returned None" ) |
| 855 | except ( ValueError, TypeError ): |
| 856 | main.log.exception( "Error parsing partitions" ) |
| 857 | main.log.error( repr( partitions ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 858 | pendingMap = onosCli.pendingMap() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 859 | try: |
| 860 | if pendingMap : |
| 861 | parsedPending = json.loads( pendingMap ) |
| 862 | main.log.warn( json.dumps( parsedPending, |
| 863 | sort_keys=True, |
| 864 | indent=4, |
| 865 | separators=( ',', ': ' ) ) ) |
| 866 | # TODO check something here? |
| 867 | else: |
| 868 | main.log.error( "pendingMap() returned None" ) |
| 869 | except ( ValueError, TypeError ): |
| 870 | main.log.exception( "Error parsing pending map" ) |
| 871 | main.log.error( repr( pendingMap ) ) |
| 872 | |
| 873 | def CASE4( self, main ): |
| 874 | """ |
| 875 | Ping across added host intents |
| 876 | """ |
| 877 | import json |
| 878 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 879 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 880 | assert main, "main not defined" |
| 881 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 882 | assert main.CLIs, "main.CLIs not defined" |
| 883 | assert main.nodes, "main.nodes not defined" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 884 | main.case( "Verify connectivity by sending traffic across Intents" ) |
Jon Hall | 783bbf9 | 2015-07-23 14:33:19 -0700 | [diff] [blame] | 885 | main.caseExplanation = "Ping across added host intents to check " +\ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 886 | "functionality and check the state of " +\ |
| 887 | "the intent" |
| 888 | main.step( "Ping across added host intents" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 889 | onosCli = main.CLIs[ main.activeNodes[0] ] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 890 | PingResult = main.TRUE |
| 891 | for i in range( 8, 18 ): |
| 892 | ping = main.Mininet1.pingHost( src="h" + str( i ), |
| 893 | target="h" + str( i + 10 ) ) |
| 894 | PingResult = PingResult and ping |
| 895 | if ping == main.FALSE: |
| 896 | main.log.warn( "Ping failed between h" + str( i ) + |
| 897 | " and h" + str( i + 10 ) ) |
| 898 | elif ping == main.TRUE: |
| 899 | main.log.info( "Ping test passed!" ) |
| 900 | # Don't set PingResult or you'd override failures |
| 901 | if PingResult == main.FALSE: |
| 902 | main.log.error( |
| 903 | "Intents have not been installed correctly, pings failed." ) |
| 904 | # TODO: pretty print |
| 905 | main.log.warn( "ONOS1 intents: " ) |
| 906 | try: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 907 | tmpIntents = onosCli.intents() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 908 | main.log.warn( json.dumps( json.loads( tmpIntents ), |
| 909 | sort_keys=True, |
| 910 | indent=4, |
| 911 | separators=( ',', ': ' ) ) ) |
| 912 | except ( ValueError, TypeError ): |
| 913 | main.log.warn( repr( tmpIntents ) ) |
| 914 | utilities.assert_equals( |
| 915 | expect=main.TRUE, |
| 916 | actual=PingResult, |
| 917 | onpass="Intents have been installed correctly and pings work", |
| 918 | onfail="Intents have not been installed correctly, pings failed." ) |
| 919 | |
| 920 | main.step( "Check Intent state" ) |
| 921 | installedCheck = False |
| 922 | loopCount = 0 |
| 923 | while not installedCheck and loopCount < 40: |
| 924 | installedCheck = True |
| 925 | # Print the intent states |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 926 | intents = onosCli.intents() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 927 | intentStates = [] |
| 928 | main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| 929 | count = 0 |
| 930 | # Iter through intents of a node |
| 931 | try: |
| 932 | for intent in json.loads( intents ): |
| 933 | state = intent.get( 'state', None ) |
| 934 | if "INSTALLED" not in state: |
| 935 | installedCheck = False |
| 936 | intentId = intent.get( 'id', None ) |
| 937 | intentStates.append( ( intentId, state ) ) |
| 938 | except ( ValueError, TypeError ): |
| 939 | main.log.exception( "Error parsing intents." ) |
| 940 | # Print states |
| 941 | intentStates.sort() |
| 942 | for i, s in intentStates: |
| 943 | count += 1 |
| 944 | main.log.info( "%-6s%-15s%-15s" % |
| 945 | ( str( count ), str( i ), str( s ) ) ) |
| 946 | if not installedCheck: |
| 947 | time.sleep( 1 ) |
| 948 | loopCount += 1 |
| 949 | utilities.assert_equals( expect=True, actual=installedCheck, |
| 950 | onpass="Intents are all INSTALLED", |
| 951 | onfail="Intents are not all in " + |
| 952 | "INSTALLED state" ) |
| 953 | |
| 954 | main.step( "Check leadership of topics" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 955 | leaders = onosCli.leaders() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 956 | topicCheck = main.TRUE |
| 957 | try: |
| 958 | if leaders: |
| 959 | parsedLeaders = json.loads( leaders ) |
| 960 | main.log.warn( json.dumps( parsedLeaders, |
| 961 | sort_keys=True, |
| 962 | indent=4, |
| 963 | separators=( ',', ': ' ) ) ) |
| 964 | # check for all intent partitions |
| 965 | # check for election |
| 966 | # TODO: Look at Devices as topics now that it uses this system |
| 967 | topics = [] |
| 968 | for i in range( 14 ): |
| 969 | topics.append( "intent-partition-" + str( i ) ) |
| 970 | # FIXME: this should only be after we start the app |
| 971 | # FIXME: topics.append( "org.onosproject.election" ) |
| 972 | # Print leaders output |
| 973 | main.log.debug( topics ) |
| 974 | ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| 975 | for topic in topics: |
| 976 | if topic not in ONOStopics: |
| 977 | main.log.error( "Error: " + topic + |
| 978 | " not in leaders" ) |
| 979 | topicCheck = main.FALSE |
| 980 | else: |
| 981 | main.log.error( "leaders() returned None" ) |
| 982 | topicCheck = main.FALSE |
| 983 | except ( ValueError, TypeError ): |
| 984 | topicCheck = main.FALSE |
| 985 | main.log.exception( "Error parsing leaders" ) |
| 986 | main.log.error( repr( leaders ) ) |
| 987 | # TODO: Check for a leader of these topics |
| 988 | # Check all nodes |
| 989 | if topicCheck: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 990 | for i in main.activeNodes: |
| 991 | node = main.CLIs[i] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 992 | response = node.leaders( jsonFormat=False) |
| 993 | main.log.warn( str( node.name ) + " leaders output: \n" + |
| 994 | str( response ) ) |
| 995 | |
| 996 | utilities.assert_equals( expect=main.TRUE, actual=topicCheck, |
| 997 | onpass="intent Partitions is in leaders", |
| 998 | onfail="Some topics were lost " ) |
| 999 | # Print partitions |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1000 | partitions = onosCli.partitions() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1001 | try: |
| 1002 | if partitions : |
| 1003 | parsedPartitions = json.loads( partitions ) |
| 1004 | main.log.warn( json.dumps( parsedPartitions, |
| 1005 | sort_keys=True, |
| 1006 | indent=4, |
| 1007 | separators=( ',', ': ' ) ) ) |
| 1008 | # TODO check for a leader in all paritions |
| 1009 | # TODO check for consistency among nodes |
| 1010 | else: |
| 1011 | main.log.error( "partitions() returned None" ) |
| 1012 | except ( ValueError, TypeError ): |
| 1013 | main.log.exception( "Error parsing partitions" ) |
| 1014 | main.log.error( repr( partitions ) ) |
| 1015 | # Print Pending Map |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1016 | pendingMap = onosCli.pendingMap() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1017 | try: |
| 1018 | if pendingMap : |
| 1019 | parsedPending = json.loads( pendingMap ) |
| 1020 | main.log.warn( json.dumps( parsedPending, |
| 1021 | sort_keys=True, |
| 1022 | indent=4, |
| 1023 | separators=( ',', ': ' ) ) ) |
| 1024 | # TODO check something here? |
| 1025 | else: |
| 1026 | main.log.error( "pendingMap() returned None" ) |
| 1027 | except ( ValueError, TypeError ): |
| 1028 | main.log.exception( "Error parsing pending map" ) |
| 1029 | main.log.error( repr( pendingMap ) ) |
| 1030 | |
| 1031 | if not installedCheck: |
| 1032 | main.log.info( "Waiting 60 seconds to see if the state of " + |
| 1033 | "intents change" ) |
| 1034 | time.sleep( 60 ) |
| 1035 | # Print the intent states |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1036 | intents = onosCli.intents() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1037 | intentStates = [] |
| 1038 | main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| 1039 | count = 0 |
| 1040 | # Iter through intents of a node |
| 1041 | try: |
| 1042 | for intent in json.loads( intents ): |
| 1043 | state = intent.get( 'state', None ) |
| 1044 | if "INSTALLED" not in state: |
| 1045 | installedCheck = False |
| 1046 | intentId = intent.get( 'id', None ) |
| 1047 | intentStates.append( ( intentId, state ) ) |
| 1048 | except ( ValueError, TypeError ): |
| 1049 | main.log.exception( "Error parsing intents." ) |
| 1050 | intentStates.sort() |
| 1051 | for i, s in intentStates: |
| 1052 | count += 1 |
| 1053 | main.log.info( "%-6s%-15s%-15s" % |
| 1054 | ( str( count ), str( i ), str( s ) ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1055 | leaders = onosCli.leaders() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1056 | try: |
| 1057 | missing = False |
| 1058 | if leaders: |
| 1059 | parsedLeaders = json.loads( leaders ) |
| 1060 | main.log.warn( json.dumps( parsedLeaders, |
| 1061 | sort_keys=True, |
| 1062 | indent=4, |
| 1063 | separators=( ',', ': ' ) ) ) |
| 1064 | # check for all intent partitions |
| 1065 | # check for election |
| 1066 | topics = [] |
| 1067 | for i in range( 14 ): |
| 1068 | topics.append( "intent-partition-" + str( i ) ) |
| 1069 | # FIXME: this should only be after we start the app |
| 1070 | topics.append( "org.onosproject.election" ) |
| 1071 | main.log.debug( topics ) |
| 1072 | ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| 1073 | for topic in topics: |
| 1074 | if topic not in ONOStopics: |
| 1075 | main.log.error( "Error: " + topic + |
| 1076 | " not in leaders" ) |
| 1077 | missing = True |
| 1078 | else: |
| 1079 | main.log.error( "leaders() returned None" ) |
| 1080 | except ( ValueError, TypeError ): |
| 1081 | main.log.exception( "Error parsing leaders" ) |
| 1082 | main.log.error( repr( leaders ) ) |
| 1083 | if missing: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1084 | for i in main.activeNodes: |
| 1085 | node = main.CLIs[i] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1086 | response = node.leaders( jsonFormat=False) |
| 1087 | main.log.warn( str( node.name ) + " leaders output: \n" + |
| 1088 | str( response ) ) |
| 1089 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1090 | partitions = onosCli.partitions() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1091 | try: |
| 1092 | if partitions : |
| 1093 | parsedPartitions = json.loads( partitions ) |
| 1094 | main.log.warn( json.dumps( parsedPartitions, |
| 1095 | sort_keys=True, |
| 1096 | indent=4, |
| 1097 | separators=( ',', ': ' ) ) ) |
| 1098 | # TODO check for a leader in all paritions |
| 1099 | # TODO check for consistency among nodes |
| 1100 | else: |
| 1101 | main.log.error( "partitions() returned None" ) |
| 1102 | except ( ValueError, TypeError ): |
| 1103 | main.log.exception( "Error parsing partitions" ) |
| 1104 | main.log.error( repr( partitions ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1105 | pendingMap = onosCli.pendingMap() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1106 | try: |
| 1107 | if pendingMap : |
| 1108 | parsedPending = json.loads( pendingMap ) |
| 1109 | main.log.warn( json.dumps( parsedPending, |
| 1110 | sort_keys=True, |
| 1111 | indent=4, |
| 1112 | separators=( ',', ': ' ) ) ) |
| 1113 | # TODO check something here? |
| 1114 | else: |
| 1115 | main.log.error( "pendingMap() returned None" ) |
| 1116 | except ( ValueError, TypeError ): |
| 1117 | main.log.exception( "Error parsing pending map" ) |
| 1118 | main.log.error( repr( pendingMap ) ) |
| 1119 | # Print flowrules |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1120 | node = main.activeNodes[0] |
| 1121 | main.log.debug( main.CLIs[node].flows( jsonFormat=False ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1122 | main.step( "Wait a minute then ping again" ) |
| 1123 | # the wait is above |
| 1124 | PingResult = main.TRUE |
| 1125 | for i in range( 8, 18 ): |
| 1126 | ping = main.Mininet1.pingHost( src="h" + str( i ), |
| 1127 | target="h" + str( i + 10 ) ) |
| 1128 | PingResult = PingResult and ping |
| 1129 | if ping == main.FALSE: |
| 1130 | main.log.warn( "Ping failed between h" + str( i ) + |
| 1131 | " and h" + str( i + 10 ) ) |
| 1132 | elif ping == main.TRUE: |
| 1133 | main.log.info( "Ping test passed!" ) |
| 1134 | # Don't set PingResult or you'd override failures |
| 1135 | if PingResult == main.FALSE: |
| 1136 | main.log.error( |
| 1137 | "Intents have not been installed correctly, pings failed." ) |
| 1138 | # TODO: pretty print |
| 1139 | main.log.warn( "ONOS1 intents: " ) |
| 1140 | try: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1141 | tmpIntents = onosCli.intents() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1142 | main.log.warn( json.dumps( json.loads( tmpIntents ), |
| 1143 | sort_keys=True, |
| 1144 | indent=4, |
| 1145 | separators=( ',', ': ' ) ) ) |
| 1146 | except ( ValueError, TypeError ): |
| 1147 | main.log.warn( repr( tmpIntents ) ) |
| 1148 | utilities.assert_equals( |
| 1149 | expect=main.TRUE, |
| 1150 | actual=PingResult, |
| 1151 | onpass="Intents have been installed correctly and pings work", |
| 1152 | onfail="Intents have not been installed correctly, pings failed." ) |
| 1153 | |
| 1154 | def CASE5( self, main ): |
| 1155 | """ |
| 1156 | Reading state of ONOS |
| 1157 | """ |
| 1158 | import json |
| 1159 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1160 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1161 | assert main, "main not defined" |
| 1162 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1163 | assert main.CLIs, "main.CLIs not defined" |
| 1164 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1165 | |
| 1166 | main.case( "Setting up and gathering data for current state" ) |
| 1167 | # The general idea for this test case is to pull the state of |
| 1168 | # ( intents,flows, topology,... ) from each ONOS node |
| 1169 | # We can then compare them with each other and also with past states |
| 1170 | |
| 1171 | main.step( "Check that each switch has a master" ) |
| 1172 | global mastershipState |
| 1173 | mastershipState = '[]' |
| 1174 | |
| 1175 | # Assert that each device has a master |
| 1176 | rolesNotNull = main.TRUE |
| 1177 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1178 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1179 | t = main.Thread( target=main.CLIs[i].rolesNotNull, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1180 | name="rolesNotNull-" + str( i ), |
| 1181 | args=[] ) |
| 1182 | threads.append( t ) |
| 1183 | t.start() |
| 1184 | |
| 1185 | for t in threads: |
| 1186 | t.join() |
| 1187 | rolesNotNull = rolesNotNull and t.result |
| 1188 | utilities.assert_equals( |
| 1189 | expect=main.TRUE, |
| 1190 | actual=rolesNotNull, |
| 1191 | onpass="Each device has a master", |
| 1192 | onfail="Some devices don't have a master assigned" ) |
| 1193 | |
| 1194 | main.step( "Get the Mastership of each switch from each controller" ) |
| 1195 | ONOSMastership = [] |
| 1196 | mastershipCheck = main.FALSE |
| 1197 | consistentMastership = True |
| 1198 | rolesResults = True |
| 1199 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1200 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1201 | t = main.Thread( target=main.CLIs[i].roles, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1202 | name="roles-" + str( i ), |
| 1203 | args=[] ) |
| 1204 | threads.append( t ) |
| 1205 | t.start() |
| 1206 | |
| 1207 | for t in threads: |
| 1208 | t.join() |
| 1209 | ONOSMastership.append( t.result ) |
| 1210 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1211 | for i in range( len( ONOSMastership ) ): |
| 1212 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1213 | if not ONOSMastership[i] or "Error" in ONOSMastership[i]: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1214 | main.log.error( "Error in getting ONOS" + node + " roles" ) |
| 1215 | main.log.warn( "ONOS" + node + " mastership response: " + |
| 1216 | repr( ONOSMastership[i] ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1217 | rolesResults = False |
| 1218 | utilities.assert_equals( |
| 1219 | expect=True, |
| 1220 | actual=rolesResults, |
| 1221 | onpass="No error in reading roles output", |
| 1222 | onfail="Error in reading roles from ONOS" ) |
| 1223 | |
| 1224 | main.step( "Check for consistency in roles from each controller" ) |
| 1225 | if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ): |
| 1226 | main.log.info( |
| 1227 | "Switch roles are consistent across all ONOS nodes" ) |
| 1228 | else: |
| 1229 | consistentMastership = False |
| 1230 | utilities.assert_equals( |
| 1231 | expect=True, |
| 1232 | actual=consistentMastership, |
| 1233 | onpass="Switch roles are consistent across all ONOS nodes", |
| 1234 | onfail="ONOS nodes have different views of switch roles" ) |
| 1235 | |
| 1236 | if rolesResults and not consistentMastership: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1237 | for i in range( len( main.activeNodes ) ): |
| 1238 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1239 | try: |
| 1240 | main.log.warn( |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1241 | "ONOS" + node + " roles: ", |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1242 | json.dumps( |
| 1243 | json.loads( ONOSMastership[ i ] ), |
| 1244 | sort_keys=True, |
| 1245 | indent=4, |
| 1246 | separators=( ',', ': ' ) ) ) |
| 1247 | except ( ValueError, TypeError ): |
| 1248 | main.log.warn( repr( ONOSMastership[ i ] ) ) |
| 1249 | elif rolesResults and consistentMastership: |
| 1250 | mastershipCheck = main.TRUE |
| 1251 | mastershipState = ONOSMastership[ 0 ] |
| 1252 | |
| 1253 | main.step( "Get the intents from each controller" ) |
| 1254 | global intentState |
| 1255 | intentState = [] |
| 1256 | ONOSIntents = [] |
| 1257 | intentCheck = main.FALSE |
| 1258 | consistentIntents = True |
| 1259 | intentsResults = True |
| 1260 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1261 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1262 | t = main.Thread( target=main.CLIs[i].intents, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1263 | name="intents-" + str( i ), |
| 1264 | args=[], |
| 1265 | kwargs={ 'jsonFormat': True } ) |
| 1266 | threads.append( t ) |
| 1267 | t.start() |
| 1268 | |
| 1269 | for t in threads: |
| 1270 | t.join() |
| 1271 | ONOSIntents.append( t.result ) |
| 1272 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1273 | for i in range( len( ONOSIntents ) ): |
| 1274 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1275 | if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1276 | main.log.error( "Error in getting ONOS" + node + " intents" ) |
| 1277 | main.log.warn( "ONOS" + node + " intents response: " + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1278 | repr( ONOSIntents[ i ] ) ) |
| 1279 | intentsResults = False |
| 1280 | utilities.assert_equals( |
| 1281 | expect=True, |
| 1282 | actual=intentsResults, |
| 1283 | onpass="No error in reading intents output", |
| 1284 | onfail="Error in reading intents from ONOS" ) |
| 1285 | |
| 1286 | main.step( "Check for consistency in Intents from each controller" ) |
| 1287 | if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ): |
| 1288 | main.log.info( "Intents are consistent across all ONOS " + |
| 1289 | "nodes" ) |
| 1290 | else: |
| 1291 | consistentIntents = False |
| 1292 | main.log.error( "Intents not consistent" ) |
| 1293 | utilities.assert_equals( |
| 1294 | expect=True, |
| 1295 | actual=consistentIntents, |
| 1296 | onpass="Intents are consistent across all ONOS nodes", |
| 1297 | onfail="ONOS nodes have different views of intents" ) |
| 1298 | |
| 1299 | if intentsResults: |
| 1300 | # Try to make it easy to figure out what is happening |
| 1301 | # |
| 1302 | # Intent ONOS1 ONOS2 ... |
| 1303 | # 0x01 INSTALLED INSTALLING |
| 1304 | # ... ... ... |
| 1305 | # ... ... ... |
| 1306 | title = " Id" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1307 | for n in main.activeNodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1308 | title += " " * 10 + "ONOS" + str( n + 1 ) |
| 1309 | main.log.warn( title ) |
| 1310 | # get all intent keys in the cluster |
| 1311 | keys = [] |
| 1312 | for nodeStr in ONOSIntents: |
| 1313 | node = json.loads( nodeStr ) |
| 1314 | for intent in node: |
| 1315 | keys.append( intent.get( 'id' ) ) |
| 1316 | keys = set( keys ) |
| 1317 | for key in keys: |
| 1318 | row = "%-13s" % key |
| 1319 | for nodeStr in ONOSIntents: |
| 1320 | node = json.loads( nodeStr ) |
| 1321 | for intent in node: |
| 1322 | if intent.get( 'id', "Error" ) == key: |
| 1323 | row += "%-15s" % intent.get( 'state' ) |
| 1324 | main.log.warn( row ) |
| 1325 | # End table view |
| 1326 | |
| 1327 | if intentsResults and not consistentIntents: |
| 1328 | # print the json objects |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1329 | n = str( main.activeNodes[-1] + 1 ) |
| 1330 | main.log.debug( "ONOS" + n + " intents: " ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1331 | main.log.debug( json.dumps( json.loads( ONOSIntents[ -1 ] ), |
| 1332 | sort_keys=True, |
| 1333 | indent=4, |
| 1334 | separators=( ',', ': ' ) ) ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1335 | for i in range( len( ONOSIntents ) ): |
| 1336 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1337 | if ONOSIntents[ i ] != ONOSIntents[ -1 ]: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1338 | main.log.debug( "ONOS" + node + " intents: " ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1339 | main.log.debug( json.dumps( json.loads( ONOSIntents[i] ), |
| 1340 | sort_keys=True, |
| 1341 | indent=4, |
| 1342 | separators=( ',', ': ' ) ) ) |
| 1343 | else: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1344 | main.log.debug( "ONOS" + node + " intents match ONOS" + |
| 1345 | n + " intents" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1346 | elif intentsResults and consistentIntents: |
| 1347 | intentCheck = main.TRUE |
| 1348 | intentState = ONOSIntents[ 0 ] |
| 1349 | |
| 1350 | main.step( "Get the flows from each controller" ) |
| 1351 | global flowState |
| 1352 | flowState = [] |
| 1353 | ONOSFlows = [] |
| 1354 | ONOSFlowsJson = [] |
| 1355 | flowCheck = main.FALSE |
| 1356 | consistentFlows = True |
| 1357 | flowsResults = True |
| 1358 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1359 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1360 | t = main.Thread( target=main.CLIs[i].flows, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1361 | name="flows-" + str( i ), |
| 1362 | args=[], |
| 1363 | kwargs={ 'jsonFormat': True } ) |
| 1364 | threads.append( t ) |
| 1365 | t.start() |
| 1366 | |
| 1367 | # NOTE: Flows command can take some time to run |
| 1368 | time.sleep(30) |
| 1369 | for t in threads: |
| 1370 | t.join() |
| 1371 | result = t.result |
| 1372 | ONOSFlows.append( result ) |
| 1373 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1374 | for i in range( len( ONOSFlows ) ): |
| 1375 | num = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1376 | if not ONOSFlows[ i ] or "Error" in ONOSFlows[ i ]: |
| 1377 | main.log.error( "Error in getting ONOS" + num + " flows" ) |
| 1378 | main.log.warn( "ONOS" + num + " flows response: " + |
| 1379 | repr( ONOSFlows[ i ] ) ) |
| 1380 | flowsResults = False |
| 1381 | ONOSFlowsJson.append( None ) |
| 1382 | else: |
| 1383 | try: |
| 1384 | ONOSFlowsJson.append( json.loads( ONOSFlows[ i ] ) ) |
| 1385 | except ( ValueError, TypeError ): |
| 1386 | # FIXME: change this to log.error? |
| 1387 | main.log.exception( "Error in parsing ONOS" + num + |
| 1388 | " response as json." ) |
| 1389 | main.log.error( repr( ONOSFlows[ i ] ) ) |
| 1390 | ONOSFlowsJson.append( None ) |
| 1391 | flowsResults = False |
| 1392 | utilities.assert_equals( |
| 1393 | expect=True, |
| 1394 | actual=flowsResults, |
| 1395 | onpass="No error in reading flows output", |
| 1396 | onfail="Error in reading flows from ONOS" ) |
| 1397 | |
| 1398 | main.step( "Check for consistency in Flows from each controller" ) |
| 1399 | tmp = [ len( i ) == len( ONOSFlowsJson[ 0 ] ) for i in ONOSFlowsJson ] |
| 1400 | if all( tmp ): |
| 1401 | main.log.info( "Flow count is consistent across all ONOS nodes" ) |
| 1402 | else: |
| 1403 | consistentFlows = False |
| 1404 | utilities.assert_equals( |
| 1405 | expect=True, |
| 1406 | actual=consistentFlows, |
| 1407 | onpass="The flow count is consistent across all ONOS nodes", |
| 1408 | onfail="ONOS nodes have different flow counts" ) |
| 1409 | |
| 1410 | if flowsResults and not consistentFlows: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1411 | for i in range( len( ONOSFlows ) ): |
| 1412 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1413 | try: |
| 1414 | main.log.warn( |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1415 | "ONOS" + node + " flows: " + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1416 | json.dumps( json.loads( ONOSFlows[i] ), sort_keys=True, |
| 1417 | indent=4, separators=( ',', ': ' ) ) ) |
| 1418 | except ( ValueError, TypeError ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1419 | main.log.warn( "ONOS" + node + " flows: " + |
| 1420 | repr( ONOSFlows[ i ] ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1421 | elif flowsResults and consistentFlows: |
| 1422 | flowCheck = main.TRUE |
| 1423 | flowState = ONOSFlows[ 0 ] |
| 1424 | |
| 1425 | main.step( "Get the OF Table entries" ) |
| 1426 | global flows |
| 1427 | flows = [] |
| 1428 | for i in range( 1, 29 ): |
Jon Hall | ca7ac29 | 2015-11-11 09:28:12 -0800 | [diff] [blame^] | 1429 | flows.append( main.Mininet1.getFlowTable( "s" + str( i ), version="1.3" ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1430 | if flowCheck == main.FALSE: |
| 1431 | for table in flows: |
| 1432 | main.log.warn( table ) |
| 1433 | # TODO: Compare switch flow tables with ONOS flow tables |
| 1434 | |
| 1435 | main.step( "Start continuous pings" ) |
| 1436 | main.Mininet2.pingLong( |
| 1437 | src=main.params[ 'PING' ][ 'source1' ], |
| 1438 | target=main.params[ 'PING' ][ 'target1' ], |
| 1439 | pingTime=500 ) |
| 1440 | main.Mininet2.pingLong( |
| 1441 | src=main.params[ 'PING' ][ 'source2' ], |
| 1442 | target=main.params[ 'PING' ][ 'target2' ], |
| 1443 | pingTime=500 ) |
| 1444 | main.Mininet2.pingLong( |
| 1445 | src=main.params[ 'PING' ][ 'source3' ], |
| 1446 | target=main.params[ 'PING' ][ 'target3' ], |
| 1447 | pingTime=500 ) |
| 1448 | main.Mininet2.pingLong( |
| 1449 | src=main.params[ 'PING' ][ 'source4' ], |
| 1450 | target=main.params[ 'PING' ][ 'target4' ], |
| 1451 | pingTime=500 ) |
| 1452 | main.Mininet2.pingLong( |
| 1453 | src=main.params[ 'PING' ][ 'source5' ], |
| 1454 | target=main.params[ 'PING' ][ 'target5' ], |
| 1455 | pingTime=500 ) |
| 1456 | main.Mininet2.pingLong( |
| 1457 | src=main.params[ 'PING' ][ 'source6' ], |
| 1458 | target=main.params[ 'PING' ][ 'target6' ], |
| 1459 | pingTime=500 ) |
| 1460 | main.Mininet2.pingLong( |
| 1461 | src=main.params[ 'PING' ][ 'source7' ], |
| 1462 | target=main.params[ 'PING' ][ 'target7' ], |
| 1463 | pingTime=500 ) |
| 1464 | main.Mininet2.pingLong( |
| 1465 | src=main.params[ 'PING' ][ 'source8' ], |
| 1466 | target=main.params[ 'PING' ][ 'target8' ], |
| 1467 | pingTime=500 ) |
| 1468 | main.Mininet2.pingLong( |
| 1469 | src=main.params[ 'PING' ][ 'source9' ], |
| 1470 | target=main.params[ 'PING' ][ 'target9' ], |
| 1471 | pingTime=500 ) |
| 1472 | main.Mininet2.pingLong( |
| 1473 | src=main.params[ 'PING' ][ 'source10' ], |
| 1474 | target=main.params[ 'PING' ][ 'target10' ], |
| 1475 | pingTime=500 ) |
| 1476 | |
| 1477 | main.step( "Collecting topology information from ONOS" ) |
| 1478 | devices = [] |
| 1479 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1480 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1481 | t = main.Thread( target=main.CLIs[i].devices, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1482 | name="devices-" + str( i ), |
| 1483 | args=[ ] ) |
| 1484 | threads.append( t ) |
| 1485 | t.start() |
| 1486 | |
| 1487 | for t in threads: |
| 1488 | t.join() |
| 1489 | devices.append( t.result ) |
| 1490 | hosts = [] |
| 1491 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1492 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1493 | t = main.Thread( target=main.CLIs[i].hosts, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1494 | name="hosts-" + str( i ), |
| 1495 | args=[ ] ) |
| 1496 | threads.append( t ) |
| 1497 | t.start() |
| 1498 | |
| 1499 | for t in threads: |
| 1500 | t.join() |
| 1501 | try: |
| 1502 | hosts.append( json.loads( t.result ) ) |
| 1503 | except ( ValueError, TypeError ): |
| 1504 | # FIXME: better handling of this, print which node |
| 1505 | # Maybe use thread name? |
| 1506 | main.log.exception( "Error parsing json output of hosts" ) |
| 1507 | # FIXME: should this be an empty json object instead? |
| 1508 | hosts.append( None ) |
| 1509 | |
| 1510 | ports = [] |
| 1511 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1512 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1513 | t = main.Thread( target=main.CLIs[i].ports, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1514 | name="ports-" + str( i ), |
| 1515 | args=[ ] ) |
| 1516 | threads.append( t ) |
| 1517 | t.start() |
| 1518 | |
| 1519 | for t in threads: |
| 1520 | t.join() |
| 1521 | ports.append( t.result ) |
| 1522 | links = [] |
| 1523 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1524 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1525 | t = main.Thread( target=main.CLIs[i].links, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1526 | name="links-" + str( i ), |
| 1527 | args=[ ] ) |
| 1528 | threads.append( t ) |
| 1529 | t.start() |
| 1530 | |
| 1531 | for t in threads: |
| 1532 | t.join() |
| 1533 | links.append( t.result ) |
| 1534 | clusters = [] |
| 1535 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1536 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1537 | t = main.Thread( target=main.CLIs[i].clusters, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1538 | name="clusters-" + str( i ), |
| 1539 | args=[ ] ) |
| 1540 | threads.append( t ) |
| 1541 | t.start() |
| 1542 | |
| 1543 | for t in threads: |
| 1544 | t.join() |
| 1545 | clusters.append( t.result ) |
| 1546 | # Compare json objects for hosts and dataplane clusters |
| 1547 | |
| 1548 | # hosts |
| 1549 | main.step( "Host view is consistent across ONOS nodes" ) |
| 1550 | consistentHostsResult = main.TRUE |
| 1551 | for controller in range( len( hosts ) ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1552 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1553 | if "Error" not in hosts[ controller ]: |
| 1554 | if hosts[ controller ] == hosts[ 0 ]: |
| 1555 | continue |
| 1556 | else: # hosts not consistent |
| 1557 | main.log.error( "hosts from ONOS" + |
| 1558 | controllerStr + |
| 1559 | " is inconsistent with ONOS1" ) |
| 1560 | main.log.warn( repr( hosts[ controller ] ) ) |
| 1561 | consistentHostsResult = main.FALSE |
| 1562 | |
| 1563 | else: |
| 1564 | main.log.error( "Error in getting ONOS hosts from ONOS" + |
| 1565 | controllerStr ) |
| 1566 | consistentHostsResult = main.FALSE |
| 1567 | main.log.warn( "ONOS" + controllerStr + |
| 1568 | " hosts response: " + |
| 1569 | repr( hosts[ controller ] ) ) |
| 1570 | utilities.assert_equals( |
| 1571 | expect=main.TRUE, |
| 1572 | actual=consistentHostsResult, |
| 1573 | onpass="Hosts view is consistent across all ONOS nodes", |
| 1574 | onfail="ONOS nodes have different views of hosts" ) |
| 1575 | |
| 1576 | main.step( "Each host has an IP address" ) |
| 1577 | ipResult = main.TRUE |
| 1578 | for controller in range( 0, len( hosts ) ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1579 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1580 | for host in hosts[ controller ]: |
| 1581 | if not host.get( 'ipAddresses', [ ] ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1582 | main.log.error( "Error with host ips on controller" + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1583 | controllerStr + ": " + str( host ) ) |
| 1584 | ipResult = main.FALSE |
| 1585 | utilities.assert_equals( |
| 1586 | expect=main.TRUE, |
| 1587 | actual=ipResult, |
| 1588 | onpass="The ips of the hosts aren't empty", |
| 1589 | onfail="The ip of at least one host is missing" ) |
| 1590 | |
| 1591 | # Strongly connected clusters of devices |
| 1592 | main.step( "Cluster view is consistent across ONOS nodes" ) |
| 1593 | consistentClustersResult = main.TRUE |
| 1594 | for controller in range( len( clusters ) ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1595 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1596 | if "Error" not in clusters[ controller ]: |
| 1597 | if clusters[ controller ] == clusters[ 0 ]: |
| 1598 | continue |
| 1599 | else: # clusters not consistent |
| 1600 | main.log.error( "clusters from ONOS" + controllerStr + |
| 1601 | " is inconsistent with ONOS1" ) |
| 1602 | consistentClustersResult = main.FALSE |
| 1603 | |
| 1604 | else: |
| 1605 | main.log.error( "Error in getting dataplane clusters " + |
| 1606 | "from ONOS" + controllerStr ) |
| 1607 | consistentClustersResult = main.FALSE |
| 1608 | main.log.warn( "ONOS" + controllerStr + |
| 1609 | " clusters response: " + |
| 1610 | repr( clusters[ controller ] ) ) |
| 1611 | utilities.assert_equals( |
| 1612 | expect=main.TRUE, |
| 1613 | actual=consistentClustersResult, |
| 1614 | onpass="Clusters view is consistent across all ONOS nodes", |
| 1615 | onfail="ONOS nodes have different views of clusters" ) |
| 1616 | # there should always only be one cluster |
| 1617 | main.step( "Cluster view correct across ONOS nodes" ) |
| 1618 | try: |
| 1619 | numClusters = len( json.loads( clusters[ 0 ] ) ) |
| 1620 | except ( ValueError, TypeError ): |
| 1621 | main.log.exception( "Error parsing clusters[0]: " + |
| 1622 | repr( clusters[ 0 ] ) ) |
| 1623 | clusterResults = main.FALSE |
| 1624 | if numClusters == 1: |
| 1625 | clusterResults = main.TRUE |
| 1626 | utilities.assert_equals( |
| 1627 | expect=1, |
| 1628 | actual=numClusters, |
| 1629 | onpass="ONOS shows 1 SCC", |
| 1630 | onfail="ONOS shows " + str( numClusters ) + " SCCs" ) |
| 1631 | |
| 1632 | main.step( "Comparing ONOS topology to MN" ) |
| 1633 | devicesResults = main.TRUE |
| 1634 | linksResults = main.TRUE |
| 1635 | hostsResults = main.TRUE |
| 1636 | mnSwitches = main.Mininet1.getSwitches() |
| 1637 | mnLinks = main.Mininet1.getLinks() |
| 1638 | mnHosts = main.Mininet1.getHosts() |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1639 | for controller in main.activeNodes: |
| 1640 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1641 | if devices[ controller ] and ports[ controller ] and\ |
| 1642 | "Error" not in devices[ controller ] and\ |
| 1643 | "Error" not in ports[ controller ]: |
| 1644 | |
| 1645 | currentDevicesResult = main.Mininet1.compareSwitches( |
| 1646 | mnSwitches, |
| 1647 | json.loads( devices[ controller ] ), |
| 1648 | json.loads( ports[ controller ] ) ) |
| 1649 | else: |
| 1650 | currentDevicesResult = main.FALSE |
| 1651 | utilities.assert_equals( expect=main.TRUE, |
| 1652 | actual=currentDevicesResult, |
| 1653 | onpass="ONOS" + controllerStr + |
| 1654 | " Switches view is correct", |
| 1655 | onfail="ONOS" + controllerStr + |
| 1656 | " Switches view is incorrect" ) |
| 1657 | if links[ controller ] and "Error" not in links[ controller ]: |
| 1658 | currentLinksResult = main.Mininet1.compareLinks( |
| 1659 | mnSwitches, mnLinks, |
| 1660 | json.loads( links[ controller ] ) ) |
| 1661 | else: |
| 1662 | currentLinksResult = main.FALSE |
| 1663 | utilities.assert_equals( expect=main.TRUE, |
| 1664 | actual=currentLinksResult, |
| 1665 | onpass="ONOS" + controllerStr + |
| 1666 | " links view is correct", |
| 1667 | onfail="ONOS" + controllerStr + |
| 1668 | " links view is incorrect" ) |
| 1669 | |
| 1670 | if hosts[ controller ] or "Error" not in hosts[ controller ]: |
| 1671 | currentHostsResult = main.Mininet1.compareHosts( |
| 1672 | mnHosts, |
| 1673 | hosts[ controller ] ) |
| 1674 | else: |
| 1675 | currentHostsResult = main.FALSE |
| 1676 | utilities.assert_equals( expect=main.TRUE, |
| 1677 | actual=currentHostsResult, |
| 1678 | onpass="ONOS" + controllerStr + |
| 1679 | " hosts exist in Mininet", |
| 1680 | onfail="ONOS" + controllerStr + |
| 1681 | " hosts don't match Mininet" ) |
| 1682 | |
| 1683 | devicesResults = devicesResults and currentDevicesResult |
| 1684 | linksResults = linksResults and currentLinksResult |
| 1685 | hostsResults = hostsResults and currentHostsResult |
| 1686 | |
| 1687 | main.step( "Device information is correct" ) |
| 1688 | utilities.assert_equals( |
| 1689 | expect=main.TRUE, |
| 1690 | actual=devicesResults, |
| 1691 | onpass="Device information is correct", |
| 1692 | onfail="Device information is incorrect" ) |
| 1693 | |
| 1694 | main.step( "Links are correct" ) |
| 1695 | utilities.assert_equals( |
| 1696 | expect=main.TRUE, |
| 1697 | actual=linksResults, |
| 1698 | onpass="Link are correct", |
| 1699 | onfail="Links are incorrect" ) |
| 1700 | |
| 1701 | main.step( "Hosts are correct" ) |
| 1702 | utilities.assert_equals( |
| 1703 | expect=main.TRUE, |
| 1704 | actual=hostsResults, |
| 1705 | onpass="Hosts are correct", |
| 1706 | onfail="Hosts are incorrect" ) |
| 1707 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1708 | def CASE61( self, main ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1709 | """ |
| 1710 | The Failure case. |
| 1711 | """ |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1712 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1713 | assert main, "main not defined" |
| 1714 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1715 | assert main.CLIs, "main.CLIs not defined" |
| 1716 | assert main.nodes, "main.nodes not defined" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1717 | main.case( "Stop minority of ONOS nodes" ) |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 1718 | |
| 1719 | main.step( "Checking ONOS Logs for errors" ) |
| 1720 | for node in main.nodes: |
| 1721 | main.log.debug( "Checking logs for errors on " + node.name + ":" ) |
| 1722 | main.log.warn( main.ONOSbench.checkLogs( node.ip_address ) ) |
| 1723 | |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 1724 | n = len( main.nodes ) # Number of nodes |
| 1725 | p = ( ( n + 1 ) / 2 ) + 1 # Number of partitions |
| 1726 | main.kill = [ 0 ] # ONOS node to kill, listed by index in main.nodes |
| 1727 | if n > 3: |
| 1728 | main.kill.append( p - 1 ) |
| 1729 | # NOTE: This only works for cluster sizes of 3,5, or 7. |
| 1730 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1731 | main.step( "Stopping " + str( len( main.kill ) ) + " ONOS nodes" ) |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 1732 | killResults = main.TRUE |
| 1733 | for i in main.kill: |
| 1734 | killResults = killResults and\ |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1735 | main.ONOSbench.onosStop( main.nodes[i].ip_address ) |
| 1736 | main.activeNodes.remove( i ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1737 | utilities.assert_equals( expect=main.TRUE, actual=killResults, |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1738 | onpass="ONOS nodes stopped successfully", |
| 1739 | onfail="ONOS nodes NOT successfully stopped" ) |
| 1740 | |
| 1741 | def CASE62( self, main ): |
| 1742 | """ |
| 1743 | The bring up stopped nodes |
| 1744 | """ |
| 1745 | import time |
| 1746 | assert main.numCtrls, "main.numCtrls not defined" |
| 1747 | assert main, "main not defined" |
| 1748 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
| 1749 | assert main.CLIs, "main.CLIs not defined" |
| 1750 | assert main.nodes, "main.nodes not defined" |
| 1751 | assert main.kill, "main.kill not defined" |
| 1752 | main.case( "Restart minority of ONOS nodes" ) |
| 1753 | |
| 1754 | main.step( "Restarting " + str( len( main.kill ) ) + " ONOS nodes" ) |
| 1755 | startResults = main.TRUE |
| 1756 | restartTime = time.time() |
| 1757 | for i in main.kill: |
| 1758 | startResults = startResults and\ |
| 1759 | main.ONOSbench.onosStart( main.nodes[i].ip_address ) |
| 1760 | utilities.assert_equals( expect=main.TRUE, actual=startResults, |
| 1761 | onpass="ONOS nodes started successfully", |
| 1762 | onfail="ONOS nodes NOT successfully started" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1763 | |
| 1764 | main.step( "Checking if ONOS is up yet" ) |
| 1765 | count = 0 |
| 1766 | onosIsupResult = main.FALSE |
| 1767 | while onosIsupResult == main.FALSE and count < 10: |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 1768 | onosIsupResult = main.TRUE |
| 1769 | for i in main.kill: |
| 1770 | onosIsupResult = onosIsupResult and\ |
| 1771 | main.ONOSbench.isup( main.nodes[i].ip_address ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1772 | count = count + 1 |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1773 | utilities.assert_equals( expect=main.TRUE, actual=onosIsupResult, |
| 1774 | onpass="ONOS restarted successfully", |
| 1775 | onfail="ONOS restart NOT successful" ) |
| 1776 | |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1777 | main.step( "Restarting ONOS main.CLIs" ) |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 1778 | cliResults = main.TRUE |
| 1779 | for i in main.kill: |
| 1780 | cliResults = cliResults and\ |
| 1781 | main.CLIs[i].startOnosCli( main.nodes[i].ip_address ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1782 | main.activeNodes.append( i ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1783 | utilities.assert_equals( expect=main.TRUE, actual=cliResults, |
| 1784 | onpass="ONOS cli restarted", |
| 1785 | onfail="ONOS cli did not restart" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1786 | main.activeNodes.sort() |
| 1787 | try: |
| 1788 | assert list( set( main.activeNodes ) ) == main.activeNodes,\ |
| 1789 | "List of active nodes has duplicates, this likely indicates something was run out of order" |
| 1790 | except AssertionError: |
| 1791 | main.log.exception( "" ) |
| 1792 | main.cleanup() |
| 1793 | main.exit() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1794 | |
| 1795 | # Grab the time of restart so we chan check how long the gossip |
| 1796 | # protocol has had time to work |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1797 | main.restartTime = time.time() - restartTime |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1798 | main.log.debug( "Restart time: " + str( main.restartTime ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1799 | # TODO: MAke this configurable. Also, we are breaking the above timer |
| 1800 | time.sleep( 60 ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1801 | node = main.activeNodes[0] |
| 1802 | main.log.debug( main.CLIs[node].nodes( jsonFormat=False ) ) |
| 1803 | main.log.debug( main.CLIs[node].leaders( jsonFormat=False ) ) |
| 1804 | main.log.debug( main.CLIs[node].partitions( jsonFormat=False ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1805 | |
| 1806 | def CASE7( self, main ): |
| 1807 | """ |
| 1808 | Check state after ONOS failure |
| 1809 | """ |
| 1810 | import json |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1811 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1812 | assert main, "main not defined" |
| 1813 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1814 | assert main.CLIs, "main.CLIs not defined" |
| 1815 | assert main.nodes, "main.nodes not defined" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1816 | try: |
| 1817 | main.kill |
| 1818 | except AttributeError: |
| 1819 | main.kill = [] |
| 1820 | |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1821 | main.case( "Running ONOS Constant State Tests" ) |
| 1822 | |
| 1823 | main.step( "Check that each switch has a master" ) |
| 1824 | # Assert that each device has a master |
| 1825 | rolesNotNull = main.TRUE |
| 1826 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1827 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1828 | t = main.Thread( target=main.CLIs[i].rolesNotNull, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1829 | name="rolesNotNull-" + str( i ), |
| 1830 | args=[ ] ) |
| 1831 | threads.append( t ) |
| 1832 | t.start() |
| 1833 | |
| 1834 | for t in threads: |
| 1835 | t.join() |
| 1836 | rolesNotNull = rolesNotNull and t.result |
| 1837 | utilities.assert_equals( |
| 1838 | expect=main.TRUE, |
| 1839 | actual=rolesNotNull, |
| 1840 | onpass="Each device has a master", |
| 1841 | onfail="Some devices don't have a master assigned" ) |
| 1842 | |
| 1843 | main.step( "Read device roles from ONOS" ) |
| 1844 | ONOSMastership = [] |
| 1845 | consistentMastership = True |
| 1846 | rolesResults = True |
| 1847 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1848 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1849 | t = main.Thread( target=main.CLIs[i].roles, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1850 | name="roles-" + str( i ), |
| 1851 | args=[] ) |
| 1852 | threads.append( t ) |
| 1853 | t.start() |
| 1854 | |
| 1855 | for t in threads: |
| 1856 | t.join() |
| 1857 | ONOSMastership.append( t.result ) |
| 1858 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1859 | for i in range( len( ONOSMastership ) ): |
| 1860 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1861 | if not ONOSMastership[i] or "Error" in ONOSMastership[i]: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1862 | main.log.error( "Error in getting ONOS" + node + " roles" ) |
| 1863 | main.log.warn( "ONOS" + node + " mastership response: " + |
| 1864 | repr( ONOSMastership[i] ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1865 | rolesResults = False |
| 1866 | utilities.assert_equals( |
| 1867 | expect=True, |
| 1868 | actual=rolesResults, |
| 1869 | onpass="No error in reading roles output", |
| 1870 | onfail="Error in reading roles from ONOS" ) |
| 1871 | |
| 1872 | main.step( "Check for consistency in roles from each controller" ) |
| 1873 | if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ): |
| 1874 | main.log.info( |
| 1875 | "Switch roles are consistent across all ONOS nodes" ) |
| 1876 | else: |
| 1877 | consistentMastership = False |
| 1878 | utilities.assert_equals( |
| 1879 | expect=True, |
| 1880 | actual=consistentMastership, |
| 1881 | onpass="Switch roles are consistent across all ONOS nodes", |
| 1882 | onfail="ONOS nodes have different views of switch roles" ) |
| 1883 | |
| 1884 | if rolesResults and not consistentMastership: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1885 | for i in range( len( ONOSMastership ) ): |
| 1886 | node = str( main.activeNodes[i] + 1 ) |
| 1887 | main.log.warn( "ONOS" + node + " roles: ", |
| 1888 | json.dumps( json.loads( ONOSMastership[ i ] ), |
| 1889 | sort_keys=True, |
| 1890 | indent=4, |
| 1891 | separators=( ',', ': ' ) ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1892 | |
| 1893 | # NOTE: we expect mastership to change on controller failure |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1894 | |
| 1895 | main.step( "Get the intents and compare across all nodes" ) |
| 1896 | ONOSIntents = [] |
| 1897 | intentCheck = main.FALSE |
| 1898 | consistentIntents = True |
| 1899 | intentsResults = True |
| 1900 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1901 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 1902 | t = main.Thread( target=main.CLIs[i].intents, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1903 | name="intents-" + str( i ), |
| 1904 | args=[], |
| 1905 | kwargs={ 'jsonFormat': True } ) |
| 1906 | threads.append( t ) |
| 1907 | t.start() |
| 1908 | |
| 1909 | for t in threads: |
| 1910 | t.join() |
| 1911 | ONOSIntents.append( t.result ) |
| 1912 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1913 | for i in range( len( ONOSIntents) ): |
| 1914 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1915 | if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1916 | main.log.error( "Error in getting ONOS" + node + " intents" ) |
| 1917 | main.log.warn( "ONOS" + node + " intents response: " + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1918 | repr( ONOSIntents[ i ] ) ) |
| 1919 | intentsResults = False |
| 1920 | utilities.assert_equals( |
| 1921 | expect=True, |
| 1922 | actual=intentsResults, |
| 1923 | onpass="No error in reading intents output", |
| 1924 | onfail="Error in reading intents from ONOS" ) |
| 1925 | |
| 1926 | main.step( "Check for consistency in Intents from each controller" ) |
| 1927 | if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ): |
| 1928 | main.log.info( "Intents are consistent across all ONOS " + |
| 1929 | "nodes" ) |
| 1930 | else: |
| 1931 | consistentIntents = False |
| 1932 | |
| 1933 | # Try to make it easy to figure out what is happening |
| 1934 | # |
| 1935 | # Intent ONOS1 ONOS2 ... |
| 1936 | # 0x01 INSTALLED INSTALLING |
| 1937 | # ... ... ... |
| 1938 | # ... ... ... |
| 1939 | title = " ID" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1940 | for n in main.activeNodes: |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1941 | title += " " * 10 + "ONOS" + str( n + 1 ) |
| 1942 | main.log.warn( title ) |
| 1943 | # get all intent keys in the cluster |
| 1944 | keys = [] |
| 1945 | for nodeStr in ONOSIntents: |
| 1946 | node = json.loads( nodeStr ) |
| 1947 | for intent in node: |
| 1948 | keys.append( intent.get( 'id' ) ) |
| 1949 | keys = set( keys ) |
| 1950 | for key in keys: |
| 1951 | row = "%-13s" % key |
| 1952 | for nodeStr in ONOSIntents: |
| 1953 | node = json.loads( nodeStr ) |
| 1954 | for intent in node: |
| 1955 | if intent.get( 'id' ) == key: |
| 1956 | row += "%-15s" % intent.get( 'state' ) |
| 1957 | main.log.warn( row ) |
| 1958 | # End table view |
| 1959 | |
| 1960 | utilities.assert_equals( |
| 1961 | expect=True, |
| 1962 | actual=consistentIntents, |
| 1963 | onpass="Intents are consistent across all ONOS nodes", |
| 1964 | onfail="ONOS nodes have different views of intents" ) |
| 1965 | intentStates = [] |
| 1966 | for node in ONOSIntents: # Iter through ONOS nodes |
| 1967 | nodeStates = [] |
| 1968 | # Iter through intents of a node |
| 1969 | try: |
| 1970 | for intent in json.loads( node ): |
| 1971 | nodeStates.append( intent[ 'state' ] ) |
| 1972 | except ( ValueError, TypeError ): |
| 1973 | main.log.exception( "Error in parsing intents" ) |
| 1974 | main.log.error( repr( node ) ) |
| 1975 | intentStates.append( nodeStates ) |
| 1976 | out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ] |
| 1977 | main.log.info( dict( out ) ) |
| 1978 | |
| 1979 | if intentsResults and not consistentIntents: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 1980 | for i in range( len( main.activeNodes ) ): |
| 1981 | node = str( main.activeNodes[i] + 1 ) |
| 1982 | main.log.warn( "ONOS" + node + " intents: " ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 1983 | main.log.warn( json.dumps( |
| 1984 | json.loads( ONOSIntents[ i ] ), |
| 1985 | sort_keys=True, |
| 1986 | indent=4, |
| 1987 | separators=( ',', ': ' ) ) ) |
| 1988 | elif intentsResults and consistentIntents: |
| 1989 | intentCheck = main.TRUE |
| 1990 | |
| 1991 | # NOTE: Store has no durability, so intents are lost across system |
| 1992 | # restarts |
| 1993 | main.step( "Compare current intents with intents before the failure" ) |
| 1994 | # NOTE: this requires case 5 to pass for intentState to be set. |
| 1995 | # maybe we should stop the test if that fails? |
| 1996 | sameIntents = main.FALSE |
| 1997 | if intentState and intentState == ONOSIntents[ 0 ]: |
| 1998 | sameIntents = main.TRUE |
| 1999 | main.log.info( "Intents are consistent with before failure" ) |
| 2000 | # TODO: possibly the states have changed? we may need to figure out |
| 2001 | # what the acceptable states are |
| 2002 | elif len( intentState ) == len( ONOSIntents[ 0 ] ): |
| 2003 | sameIntents = main.TRUE |
| 2004 | try: |
| 2005 | before = json.loads( intentState ) |
| 2006 | after = json.loads( ONOSIntents[ 0 ] ) |
| 2007 | for intent in before: |
| 2008 | if intent not in after: |
| 2009 | sameIntents = main.FALSE |
| 2010 | main.log.debug( "Intent is not currently in ONOS " + |
| 2011 | "(at least in the same form):" ) |
| 2012 | main.log.debug( json.dumps( intent ) ) |
| 2013 | except ( ValueError, TypeError ): |
| 2014 | main.log.exception( "Exception printing intents" ) |
| 2015 | main.log.debug( repr( ONOSIntents[0] ) ) |
| 2016 | main.log.debug( repr( intentState ) ) |
| 2017 | if sameIntents == main.FALSE: |
| 2018 | try: |
| 2019 | main.log.debug( "ONOS intents before: " ) |
| 2020 | main.log.debug( json.dumps( json.loads( intentState ), |
| 2021 | sort_keys=True, indent=4, |
| 2022 | separators=( ',', ': ' ) ) ) |
| 2023 | main.log.debug( "Current ONOS intents: " ) |
| 2024 | main.log.debug( json.dumps( json.loads( ONOSIntents[ 0 ] ), |
| 2025 | sort_keys=True, indent=4, |
| 2026 | separators=( ',', ': ' ) ) ) |
| 2027 | except ( ValueError, TypeError ): |
| 2028 | main.log.exception( "Exception printing intents" ) |
| 2029 | main.log.debug( repr( ONOSIntents[0] ) ) |
| 2030 | main.log.debug( repr( intentState ) ) |
| 2031 | utilities.assert_equals( |
| 2032 | expect=main.TRUE, |
| 2033 | actual=sameIntents, |
| 2034 | onpass="Intents are consistent with before failure", |
| 2035 | onfail="The Intents changed during failure" ) |
| 2036 | intentCheck = intentCheck and sameIntents |
| 2037 | |
| 2038 | main.step( "Get the OF Table entries and compare to before " + |
| 2039 | "component failure" ) |
| 2040 | FlowTables = main.TRUE |
| 2041 | flows2 = [] |
| 2042 | for i in range( 28 ): |
| 2043 | main.log.info( "Checking flow table on s" + str( i + 1 ) ) |
Jon Hall | ca7ac29 | 2015-11-11 09:28:12 -0800 | [diff] [blame^] | 2044 | tmpFlows = main.Mininet1.getFlowTable( "s" + str( i + 1 ), version="1.3" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2045 | flows2.append( tmpFlows ) |
Jon Hall | 9043c90 | 2015-07-30 14:23:44 -0700 | [diff] [blame] | 2046 | tempResult = main.Mininet1.flowComp( |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2047 | flow1=flows[ i ], |
| 2048 | flow2=tmpFlows ) |
| 2049 | FlowTables = FlowTables and tempResult |
| 2050 | if FlowTables == main.FALSE: |
| 2051 | main.log.info( "Differences in flow table for switch: s" + |
| 2052 | str( i + 1 ) ) |
| 2053 | utilities.assert_equals( |
| 2054 | expect=main.TRUE, |
| 2055 | actual=FlowTables, |
| 2056 | onpass="No changes were found in the flow tables", |
| 2057 | onfail="Changes were found in the flow tables" ) |
| 2058 | |
| 2059 | main.Mininet2.pingLongKill() |
| 2060 | ''' |
| 2061 | main.step( "Check the continuous pings to ensure that no packets " + |
| 2062 | "were dropped during component failure" ) |
| 2063 | main.Mininet2.pingKill( main.params[ 'TESTONUSER' ], |
| 2064 | main.params[ 'TESTONIP' ] ) |
| 2065 | LossInPings = main.FALSE |
| 2066 | # NOTE: checkForLoss returns main.FALSE with 0% packet loss |
| 2067 | for i in range( 8, 18 ): |
| 2068 | main.log.info( |
| 2069 | "Checking for a loss in pings along flow from s" + |
| 2070 | str( i ) ) |
| 2071 | LossInPings = main.Mininet2.checkForLoss( |
| 2072 | "/tmp/ping.h" + |
| 2073 | str( i ) ) or LossInPings |
| 2074 | if LossInPings == main.TRUE: |
| 2075 | main.log.info( "Loss in ping detected" ) |
| 2076 | elif LossInPings == main.ERROR: |
| 2077 | main.log.info( "There are multiple mininet process running" ) |
| 2078 | elif LossInPings == main.FALSE: |
| 2079 | main.log.info( "No Loss in the pings" ) |
| 2080 | main.log.info( "No loss of dataplane connectivity" ) |
| 2081 | utilities.assert_equals( |
| 2082 | expect=main.FALSE, |
| 2083 | actual=LossInPings, |
| 2084 | onpass="No Loss of connectivity", |
| 2085 | onfail="Loss of dataplane connectivity detected" ) |
| 2086 | ''' |
| 2087 | |
| 2088 | main.step( "Leadership Election is still functional" ) |
| 2089 | # Test of LeadershipElection |
| 2090 | leaderList = [] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2091 | |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 2092 | restarted = [] |
| 2093 | for i in main.kill: |
| 2094 | restarted.append( main.nodes[i].ip_address ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2095 | leaderResult = main.TRUE |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 2096 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2097 | for i in main.activeNodes: |
| 2098 | cli = main.CLIs[i] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2099 | leaderN = cli.electionTestLeader() |
| 2100 | leaderList.append( leaderN ) |
| 2101 | if leaderN == main.FALSE: |
| 2102 | # error in response |
| 2103 | main.log.error( "Something is wrong with " + |
| 2104 | "electionTestLeader function, check the" + |
| 2105 | " error logs" ) |
| 2106 | leaderResult = main.FALSE |
| 2107 | elif leaderN is None: |
| 2108 | main.log.error( cli.name + |
| 2109 | " shows no leader for the election-app was" + |
| 2110 | " elected after the old one died" ) |
| 2111 | leaderResult = main.FALSE |
| 2112 | elif leaderN in restarted: |
| 2113 | main.log.error( cli.name + " shows " + str( leaderN ) + |
| 2114 | " as leader for the election-app, but it " + |
| 2115 | "was restarted" ) |
| 2116 | leaderResult = main.FALSE |
| 2117 | if len( set( leaderList ) ) != 1: |
| 2118 | leaderResult = main.FALSE |
| 2119 | main.log.error( |
| 2120 | "Inconsistent view of leader for the election test app" ) |
| 2121 | # TODO: print the list |
| 2122 | utilities.assert_equals( |
| 2123 | expect=main.TRUE, |
| 2124 | actual=leaderResult, |
| 2125 | onpass="Leadership election passed", |
| 2126 | onfail="Something went wrong with Leadership election" ) |
| 2127 | |
| 2128 | def CASE8( self, main ): |
| 2129 | """ |
| 2130 | Compare topo |
| 2131 | """ |
| 2132 | import json |
| 2133 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2134 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2135 | assert main, "main not defined" |
| 2136 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2137 | assert main.CLIs, "main.CLIs not defined" |
| 2138 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2139 | |
| 2140 | main.case( "Compare ONOS Topology view to Mininet topology" ) |
Jon Hall | 783bbf9 | 2015-07-23 14:33:19 -0700 | [diff] [blame] | 2141 | main.caseExplanation = "Compare topology objects between Mininet" +\ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2142 | " and ONOS" |
| 2143 | |
| 2144 | main.step( "Comparing ONOS topology to MN" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2145 | topoResult = main.FALSE |
| 2146 | elapsed = 0 |
| 2147 | count = 0 |
| 2148 | main.step( "Collecting topology information from ONOS" ) |
| 2149 | startTime = time.time() |
| 2150 | # Give time for Gossip to work |
| 2151 | while topoResult == main.FALSE and elapsed < 60: |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 2152 | devicesResults = main.TRUE |
| 2153 | linksResults = main.TRUE |
| 2154 | hostsResults = main.TRUE |
| 2155 | hostAttachmentResults = True |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2156 | count += 1 |
| 2157 | cliStart = time.time() |
| 2158 | devices = [] |
| 2159 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2160 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2161 | t = main.Thread( target=main.CLIs[i].devices, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2162 | name="devices-" + str( i ), |
| 2163 | args=[ ] ) |
| 2164 | threads.append( t ) |
| 2165 | t.start() |
| 2166 | |
| 2167 | for t in threads: |
| 2168 | t.join() |
| 2169 | devices.append( t.result ) |
| 2170 | hosts = [] |
| 2171 | ipResult = main.TRUE |
| 2172 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2173 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2174 | t = main.Thread( target=main.CLIs[i].hosts, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2175 | name="hosts-" + str( i ), |
| 2176 | args=[ ] ) |
| 2177 | threads.append( t ) |
| 2178 | t.start() |
| 2179 | |
| 2180 | for t in threads: |
| 2181 | t.join() |
| 2182 | try: |
| 2183 | hosts.append( json.loads( t.result ) ) |
| 2184 | except ( ValueError, TypeError ): |
| 2185 | main.log.exception( "Error parsing hosts results" ) |
| 2186 | main.log.error( repr( t.result ) ) |
| 2187 | for controller in range( 0, len( hosts ) ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2188 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2189 | for host in hosts[ controller ]: |
| 2190 | if host is None or host.get( 'ipAddresses', [] ) == []: |
| 2191 | main.log.error( |
| 2192 | "DEBUG:Error with host ipAddresses on controller" + |
| 2193 | controllerStr + ": " + str( host ) ) |
| 2194 | ipResult = main.FALSE |
| 2195 | ports = [] |
| 2196 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2197 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2198 | t = main.Thread( target=main.CLIs[i].ports, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2199 | name="ports-" + str( i ), |
| 2200 | args=[ ] ) |
| 2201 | threads.append( t ) |
| 2202 | t.start() |
| 2203 | |
| 2204 | for t in threads: |
| 2205 | t.join() |
| 2206 | ports.append( t.result ) |
| 2207 | links = [] |
| 2208 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2209 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2210 | t = main.Thread( target=main.CLIs[i].links, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2211 | name="links-" + str( i ), |
| 2212 | args=[ ] ) |
| 2213 | threads.append( t ) |
| 2214 | t.start() |
| 2215 | |
| 2216 | for t in threads: |
| 2217 | t.join() |
| 2218 | links.append( t.result ) |
| 2219 | clusters = [] |
| 2220 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2221 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2222 | t = main.Thread( target=main.CLIs[i].clusters, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2223 | name="clusters-" + str( i ), |
| 2224 | args=[ ] ) |
| 2225 | threads.append( t ) |
| 2226 | t.start() |
| 2227 | |
| 2228 | for t in threads: |
| 2229 | t.join() |
| 2230 | clusters.append( t.result ) |
| 2231 | |
| 2232 | elapsed = time.time() - startTime |
| 2233 | cliTime = time.time() - cliStart |
| 2234 | print "Elapsed time: " + str( elapsed ) |
| 2235 | print "CLI time: " + str( cliTime ) |
| 2236 | |
| 2237 | mnSwitches = main.Mininet1.getSwitches() |
| 2238 | mnLinks = main.Mininet1.getLinks() |
| 2239 | mnHosts = main.Mininet1.getHosts() |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2240 | for controller in range( len( main.activeNodes ) ): |
| 2241 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2242 | if devices[ controller ] and ports[ controller ] and\ |
| 2243 | "Error" not in devices[ controller ] and\ |
| 2244 | "Error" not in ports[ controller ]: |
| 2245 | |
| 2246 | currentDevicesResult = main.Mininet1.compareSwitches( |
| 2247 | mnSwitches, |
| 2248 | json.loads( devices[ controller ] ), |
| 2249 | json.loads( ports[ controller ] ) ) |
| 2250 | else: |
| 2251 | currentDevicesResult = main.FALSE |
| 2252 | utilities.assert_equals( expect=main.TRUE, |
| 2253 | actual=currentDevicesResult, |
| 2254 | onpass="ONOS" + controllerStr + |
| 2255 | " Switches view is correct", |
| 2256 | onfail="ONOS" + controllerStr + |
| 2257 | " Switches view is incorrect" ) |
| 2258 | |
| 2259 | if links[ controller ] and "Error" not in links[ controller ]: |
| 2260 | currentLinksResult = main.Mininet1.compareLinks( |
| 2261 | mnSwitches, mnLinks, |
| 2262 | json.loads( links[ controller ] ) ) |
| 2263 | else: |
| 2264 | currentLinksResult = main.FALSE |
| 2265 | utilities.assert_equals( expect=main.TRUE, |
| 2266 | actual=currentLinksResult, |
| 2267 | onpass="ONOS" + controllerStr + |
| 2268 | " links view is correct", |
| 2269 | onfail="ONOS" + controllerStr + |
| 2270 | " links view is incorrect" ) |
| 2271 | |
| 2272 | if hosts[ controller ] or "Error" not in hosts[ controller ]: |
| 2273 | currentHostsResult = main.Mininet1.compareHosts( |
| 2274 | mnHosts, |
| 2275 | hosts[ controller ] ) |
| 2276 | else: |
| 2277 | currentHostsResult = main.FALSE |
| 2278 | utilities.assert_equals( expect=main.TRUE, |
| 2279 | actual=currentHostsResult, |
| 2280 | onpass="ONOS" + controllerStr + |
| 2281 | " hosts exist in Mininet", |
| 2282 | onfail="ONOS" + controllerStr + |
| 2283 | " hosts don't match Mininet" ) |
| 2284 | # CHECKING HOST ATTACHMENT POINTS |
| 2285 | hostAttachment = True |
| 2286 | zeroHosts = False |
| 2287 | # FIXME: topo-HA/obelisk specific mappings: |
| 2288 | # key is mac and value is dpid |
| 2289 | mappings = {} |
| 2290 | for i in range( 1, 29 ): # hosts 1 through 28 |
| 2291 | # set up correct variables: |
| 2292 | macId = "00:" * 5 + hex( i ).split( "0x" )[1].upper().zfill(2) |
| 2293 | if i == 1: |
| 2294 | deviceId = "1000".zfill(16) |
| 2295 | elif i == 2: |
| 2296 | deviceId = "2000".zfill(16) |
| 2297 | elif i == 3: |
| 2298 | deviceId = "3000".zfill(16) |
| 2299 | elif i == 4: |
| 2300 | deviceId = "3004".zfill(16) |
| 2301 | elif i == 5: |
| 2302 | deviceId = "5000".zfill(16) |
| 2303 | elif i == 6: |
| 2304 | deviceId = "6000".zfill(16) |
| 2305 | elif i == 7: |
| 2306 | deviceId = "6007".zfill(16) |
| 2307 | elif i >= 8 and i <= 17: |
| 2308 | dpid = '3' + str( i ).zfill( 3 ) |
| 2309 | deviceId = dpid.zfill(16) |
| 2310 | elif i >= 18 and i <= 27: |
| 2311 | dpid = '6' + str( i ).zfill( 3 ) |
| 2312 | deviceId = dpid.zfill(16) |
| 2313 | elif i == 28: |
| 2314 | deviceId = "2800".zfill(16) |
| 2315 | mappings[ macId ] = deviceId |
| 2316 | if hosts[ controller ] or "Error" not in hosts[ controller ]: |
| 2317 | if hosts[ controller ] == []: |
| 2318 | main.log.warn( "There are no hosts discovered" ) |
| 2319 | zeroHosts = True |
| 2320 | else: |
| 2321 | for host in hosts[ controller ]: |
| 2322 | mac = None |
| 2323 | location = None |
| 2324 | device = None |
| 2325 | port = None |
| 2326 | try: |
| 2327 | mac = host.get( 'mac' ) |
| 2328 | assert mac, "mac field could not be found for this host object" |
| 2329 | |
| 2330 | location = host.get( 'location' ) |
| 2331 | assert location, "location field could not be found for this host object" |
| 2332 | |
| 2333 | # Trim the protocol identifier off deviceId |
| 2334 | device = str( location.get( 'elementId' ) ).split(':')[1] |
| 2335 | assert device, "elementId field could not be found for this host location object" |
| 2336 | |
| 2337 | port = location.get( 'port' ) |
| 2338 | assert port, "port field could not be found for this host location object" |
| 2339 | |
| 2340 | # Now check if this matches where they should be |
| 2341 | if mac and device and port: |
| 2342 | if str( port ) != "1": |
| 2343 | main.log.error( "The attachment port is incorrect for " + |
| 2344 | "host " + str( mac ) + |
| 2345 | ". Expected: 1 Actual: " + str( port) ) |
| 2346 | hostAttachment = False |
| 2347 | if device != mappings[ str( mac ) ]: |
| 2348 | main.log.error( "The attachment device is incorrect for " + |
| 2349 | "host " + str( mac ) + |
| 2350 | ". Expected: " + mappings[ str( mac ) ] + |
| 2351 | " Actual: " + device ) |
| 2352 | hostAttachment = False |
| 2353 | else: |
| 2354 | hostAttachment = False |
| 2355 | except AssertionError: |
| 2356 | main.log.exception( "Json object not as expected" ) |
| 2357 | main.log.error( repr( host ) ) |
| 2358 | hostAttachment = False |
| 2359 | else: |
| 2360 | main.log.error( "No hosts json output or \"Error\"" + |
| 2361 | " in output. hosts = " + |
| 2362 | repr( hosts[ controller ] ) ) |
| 2363 | if zeroHosts is False: |
| 2364 | hostAttachment = True |
| 2365 | |
| 2366 | # END CHECKING HOST ATTACHMENT POINTS |
| 2367 | devicesResults = devicesResults and currentDevicesResult |
| 2368 | linksResults = linksResults and currentLinksResult |
| 2369 | hostsResults = hostsResults and currentHostsResult |
| 2370 | hostAttachmentResults = hostAttachmentResults and\ |
| 2371 | hostAttachment |
| 2372 | |
| 2373 | # Compare json objects for hosts and dataplane clusters |
| 2374 | |
| 2375 | # hosts |
| 2376 | main.step( "Hosts view is consistent across all ONOS nodes" ) |
| 2377 | consistentHostsResult = main.TRUE |
| 2378 | for controller in range( len( hosts ) ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2379 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2380 | if "Error" not in hosts[ controller ]: |
| 2381 | if hosts[ controller ] == hosts[ 0 ]: |
| 2382 | continue |
| 2383 | else: # hosts not consistent |
| 2384 | main.log.error( "hosts from ONOS" + controllerStr + |
| 2385 | " is inconsistent with ONOS1" ) |
| 2386 | main.log.warn( repr( hosts[ controller ] ) ) |
| 2387 | consistentHostsResult = main.FALSE |
| 2388 | |
| 2389 | else: |
| 2390 | main.log.error( "Error in getting ONOS hosts from ONOS" + |
| 2391 | controllerStr ) |
| 2392 | consistentHostsResult = main.FALSE |
| 2393 | main.log.warn( "ONOS" + controllerStr + |
| 2394 | " hosts response: " + |
| 2395 | repr( hosts[ controller ] ) ) |
| 2396 | utilities.assert_equals( |
| 2397 | expect=main.TRUE, |
| 2398 | actual=consistentHostsResult, |
| 2399 | onpass="Hosts view is consistent across all ONOS nodes", |
| 2400 | onfail="ONOS nodes have different views of hosts" ) |
| 2401 | |
| 2402 | main.step( "Hosts information is correct" ) |
| 2403 | hostsResults = hostsResults and ipResult |
| 2404 | utilities.assert_equals( |
| 2405 | expect=main.TRUE, |
| 2406 | actual=hostsResults, |
| 2407 | onpass="Host information is correct", |
| 2408 | onfail="Host information is incorrect" ) |
| 2409 | |
| 2410 | main.step( "Host attachment points to the network" ) |
| 2411 | utilities.assert_equals( |
| 2412 | expect=True, |
| 2413 | actual=hostAttachmentResults, |
| 2414 | onpass="Hosts are correctly attached to the network", |
| 2415 | onfail="ONOS did not correctly attach hosts to the network" ) |
| 2416 | |
| 2417 | # Strongly connected clusters of devices |
| 2418 | main.step( "Clusters view is consistent across all ONOS nodes" ) |
| 2419 | consistentClustersResult = main.TRUE |
| 2420 | for controller in range( len( clusters ) ): |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2421 | controllerStr = str( main.activeNodes[controller] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2422 | if "Error" not in clusters[ controller ]: |
| 2423 | if clusters[ controller ] == clusters[ 0 ]: |
| 2424 | continue |
| 2425 | else: # clusters not consistent |
| 2426 | main.log.error( "clusters from ONOS" + |
| 2427 | controllerStr + |
| 2428 | " is inconsistent with ONOS1" ) |
| 2429 | consistentClustersResult = main.FALSE |
| 2430 | |
| 2431 | else: |
| 2432 | main.log.error( "Error in getting dataplane clusters " + |
| 2433 | "from ONOS" + controllerStr ) |
| 2434 | consistentClustersResult = main.FALSE |
| 2435 | main.log.warn( "ONOS" + controllerStr + |
| 2436 | " clusters response: " + |
| 2437 | repr( clusters[ controller ] ) ) |
| 2438 | utilities.assert_equals( |
| 2439 | expect=main.TRUE, |
| 2440 | actual=consistentClustersResult, |
| 2441 | onpass="Clusters view is consistent across all ONOS nodes", |
| 2442 | onfail="ONOS nodes have different views of clusters" ) |
| 2443 | |
| 2444 | main.step( "There is only one SCC" ) |
| 2445 | # there should always only be one cluster |
| 2446 | try: |
| 2447 | numClusters = len( json.loads( clusters[ 0 ] ) ) |
| 2448 | except ( ValueError, TypeError ): |
| 2449 | main.log.exception( "Error parsing clusters[0]: " + |
| 2450 | repr( clusters[0] ) ) |
| 2451 | clusterResults = main.FALSE |
| 2452 | if numClusters == 1: |
| 2453 | clusterResults = main.TRUE |
| 2454 | utilities.assert_equals( |
| 2455 | expect=1, |
| 2456 | actual=numClusters, |
| 2457 | onpass="ONOS shows 1 SCC", |
| 2458 | onfail="ONOS shows " + str( numClusters ) + " SCCs" ) |
| 2459 | |
| 2460 | topoResult = ( devicesResults and linksResults |
| 2461 | and hostsResults and consistentHostsResult |
| 2462 | and consistentClustersResult and clusterResults |
| 2463 | and ipResult and hostAttachmentResults ) |
| 2464 | |
| 2465 | topoResult = topoResult and int( count <= 2 ) |
| 2466 | note = "note it takes about " + str( int( cliTime ) ) + \ |
| 2467 | " seconds for the test to make all the cli calls to fetch " +\ |
| 2468 | "the topology from each ONOS instance" |
| 2469 | main.log.info( |
| 2470 | "Very crass estimate for topology discovery/convergence( " + |
| 2471 | str( note ) + " ): " + str( elapsed ) + " seconds, " + |
| 2472 | str( count ) + " tries" ) |
| 2473 | |
| 2474 | main.step( "Device information is correct" ) |
| 2475 | utilities.assert_equals( |
| 2476 | expect=main.TRUE, |
| 2477 | actual=devicesResults, |
| 2478 | onpass="Device information is correct", |
| 2479 | onfail="Device information is incorrect" ) |
| 2480 | |
| 2481 | main.step( "Links are correct" ) |
| 2482 | utilities.assert_equals( |
| 2483 | expect=main.TRUE, |
| 2484 | actual=linksResults, |
| 2485 | onpass="Link are correct", |
| 2486 | onfail="Links are incorrect" ) |
| 2487 | |
| 2488 | # FIXME: move this to an ONOS state case |
| 2489 | main.step( "Checking ONOS nodes" ) |
| 2490 | nodesOutput = [] |
| 2491 | nodeResults = main.TRUE |
| 2492 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2493 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2494 | t = main.Thread( target=main.CLIs[i].nodes, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2495 | name="nodes-" + str( i ), |
| 2496 | args=[ ] ) |
| 2497 | threads.append( t ) |
| 2498 | t.start() |
| 2499 | |
| 2500 | for t in threads: |
| 2501 | t.join() |
| 2502 | nodesOutput.append( t.result ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2503 | ips = [ main.nodes[node].ip_address for node in main.activeNodes ] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2504 | for i in nodesOutput: |
| 2505 | try: |
| 2506 | current = json.loads( i ) |
| 2507 | for node in current: |
| 2508 | currentResult = main.FALSE |
| 2509 | if node['ip'] in ips: # node in nodes() output is in cell |
| 2510 | if node['state'] == 'ACTIVE': |
| 2511 | currentResult = main.TRUE |
| 2512 | else: |
| 2513 | main.log.error( "Error in ONOS node availability" ) |
| 2514 | main.log.error( |
| 2515 | json.dumps( current, |
| 2516 | sort_keys=True, |
| 2517 | indent=4, |
| 2518 | separators=( ',', ': ' ) ) ) |
| 2519 | break |
| 2520 | nodeResults = nodeResults and currentResult |
| 2521 | except ( ValueError, TypeError ): |
| 2522 | main.log.error( "Error parsing nodes output" ) |
| 2523 | main.log.warn( repr( i ) ) |
| 2524 | utilities.assert_equals( expect=main.TRUE, actual=nodeResults, |
| 2525 | onpass="Nodes check successful", |
| 2526 | onfail="Nodes check NOT successful" ) |
| 2527 | |
| 2528 | def CASE9( self, main ): |
| 2529 | """ |
| 2530 | Link s3-s28 down |
| 2531 | """ |
| 2532 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2533 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2534 | assert main, "main not defined" |
| 2535 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2536 | assert main.CLIs, "main.CLIs not defined" |
| 2537 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2538 | # NOTE: You should probably run a topology check after this |
| 2539 | |
| 2540 | linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| 2541 | |
| 2542 | description = "Turn off a link to ensure that Link Discovery " +\ |
| 2543 | "is working properly" |
| 2544 | main.case( description ) |
| 2545 | |
| 2546 | main.step( "Kill Link between s3 and s28" ) |
| 2547 | LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" ) |
| 2548 | main.log.info( "Waiting " + str( linkSleep ) + |
| 2549 | " seconds for link down to be discovered" ) |
| 2550 | time.sleep( linkSleep ) |
| 2551 | utilities.assert_equals( expect=main.TRUE, actual=LinkDown, |
| 2552 | onpass="Link down successful", |
| 2553 | onfail="Failed to bring link down" ) |
| 2554 | # TODO do some sort of check here |
| 2555 | |
| 2556 | def CASE10( self, main ): |
| 2557 | """ |
| 2558 | Link s3-s28 up |
| 2559 | """ |
| 2560 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2561 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2562 | assert main, "main not defined" |
| 2563 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2564 | assert main.CLIs, "main.CLIs not defined" |
| 2565 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2566 | # NOTE: You should probably run a topology check after this |
| 2567 | |
| 2568 | linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| 2569 | |
| 2570 | description = "Restore a link to ensure that Link Discovery is " + \ |
| 2571 | "working properly" |
| 2572 | main.case( description ) |
| 2573 | |
| 2574 | main.step( "Bring link between s3 and s28 back up" ) |
| 2575 | LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" ) |
| 2576 | main.log.info( "Waiting " + str( linkSleep ) + |
| 2577 | " seconds for link up to be discovered" ) |
| 2578 | time.sleep( linkSleep ) |
| 2579 | utilities.assert_equals( expect=main.TRUE, actual=LinkUp, |
| 2580 | onpass="Link up successful", |
| 2581 | onfail="Failed to bring link up" ) |
| 2582 | # TODO do some sort of check here |
| 2583 | |
| 2584 | def CASE11( self, main ): |
| 2585 | """ |
| 2586 | Switch Down |
| 2587 | """ |
| 2588 | # NOTE: You should probably run a topology check after this |
| 2589 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2590 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2591 | assert main, "main not defined" |
| 2592 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2593 | assert main.CLIs, "main.CLIs not defined" |
| 2594 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2595 | |
| 2596 | switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| 2597 | |
| 2598 | description = "Killing a switch to ensure it is discovered correctly" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2599 | onosCli = main.CLIs[ main.activeNodes[0] ] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2600 | main.case( description ) |
| 2601 | switch = main.params[ 'kill' ][ 'switch' ] |
| 2602 | switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| 2603 | |
| 2604 | # TODO: Make this switch parameterizable |
| 2605 | main.step( "Kill " + switch ) |
| 2606 | main.log.info( "Deleting " + switch ) |
| 2607 | main.Mininet1.delSwitch( switch ) |
| 2608 | main.log.info( "Waiting " + str( switchSleep ) + |
| 2609 | " seconds for switch down to be discovered" ) |
| 2610 | time.sleep( switchSleep ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2611 | device = onosCli.getDevice( dpid=switchDPID ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2612 | # Peek at the deleted switch |
| 2613 | main.log.warn( str( device ) ) |
| 2614 | result = main.FALSE |
| 2615 | if device and device[ 'available' ] is False: |
| 2616 | result = main.TRUE |
| 2617 | utilities.assert_equals( expect=main.TRUE, actual=result, |
| 2618 | onpass="Kill switch successful", |
| 2619 | onfail="Failed to kill switch?" ) |
| 2620 | |
| 2621 | def CASE12( self, main ): |
| 2622 | """ |
| 2623 | Switch Up |
| 2624 | """ |
| 2625 | # NOTE: You should probably run a topology check after this |
| 2626 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2627 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2628 | assert main, "main not defined" |
| 2629 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2630 | assert main.CLIs, "main.CLIs not defined" |
| 2631 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2632 | assert ONOS1Port, "ONOS1Port not defined" |
| 2633 | assert ONOS2Port, "ONOS2Port not defined" |
| 2634 | assert ONOS3Port, "ONOS3Port not defined" |
| 2635 | assert ONOS4Port, "ONOS4Port not defined" |
| 2636 | assert ONOS5Port, "ONOS5Port not defined" |
| 2637 | assert ONOS6Port, "ONOS6Port not defined" |
| 2638 | assert ONOS7Port, "ONOS7Port not defined" |
| 2639 | |
| 2640 | switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| 2641 | switch = main.params[ 'kill' ][ 'switch' ] |
| 2642 | switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| 2643 | links = main.params[ 'kill' ][ 'links' ].split() |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2644 | onosCli = main.CLIs[ main.activeNodes[0] ] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2645 | description = "Adding a switch to ensure it is discovered correctly" |
| 2646 | main.case( description ) |
| 2647 | |
| 2648 | main.step( "Add back " + switch ) |
| 2649 | main.Mininet1.addSwitch( switch, dpid=switchDPID ) |
| 2650 | for peer in links: |
| 2651 | main.Mininet1.addLink( switch, peer ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2652 | ipList = [ node.ip_address for node in main.nodes ] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2653 | main.Mininet1.assignSwController( sw=switch, ip=ipList ) |
| 2654 | main.log.info( "Waiting " + str( switchSleep ) + |
| 2655 | " seconds for switch up to be discovered" ) |
| 2656 | time.sleep( switchSleep ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2657 | device = onosCli.getDevice( dpid=switchDPID ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2658 | # Peek at the deleted switch |
| 2659 | main.log.warn( str( device ) ) |
| 2660 | result = main.FALSE |
| 2661 | if device and device[ 'available' ]: |
| 2662 | result = main.TRUE |
| 2663 | utilities.assert_equals( expect=main.TRUE, actual=result, |
| 2664 | onpass="add switch successful", |
| 2665 | onfail="Failed to add switch?" ) |
| 2666 | |
| 2667 | def CASE13( self, main ): |
| 2668 | """ |
| 2669 | Clean up |
| 2670 | """ |
| 2671 | import os |
| 2672 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2673 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2674 | assert main, "main not defined" |
| 2675 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2676 | assert main.CLIs, "main.CLIs not defined" |
| 2677 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2678 | |
| 2679 | # printing colors to terminal |
| 2680 | colors = { 'cyan': '\033[96m', 'purple': '\033[95m', |
| 2681 | 'blue': '\033[94m', 'green': '\033[92m', |
| 2682 | 'yellow': '\033[93m', 'red': '\033[91m', 'end': '\033[0m' } |
| 2683 | main.case( "Test Cleanup" ) |
| 2684 | main.step( "Killing tcpdumps" ) |
| 2685 | main.Mininet2.stopTcpdump() |
| 2686 | |
| 2687 | testname = main.TEST |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 2688 | if main.params[ 'BACKUP' ][ 'ENABLED' ] == "True": |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2689 | main.step( "Copying MN pcap and ONOS log files to test station" ) |
| 2690 | teststationUser = main.params[ 'BACKUP' ][ 'TESTONUSER' ] |
| 2691 | teststationIP = main.params[ 'BACKUP' ][ 'TESTONIP' ] |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 2692 | # NOTE: MN Pcap file is being saved to logdir. |
| 2693 | # We scp this file as MN and TestON aren't necessarily the same vm |
| 2694 | |
| 2695 | # FIXME: To be replaced with a Jenkin's post script |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2696 | # TODO: Load these from params |
| 2697 | # NOTE: must end in / |
| 2698 | logFolder = "/opt/onos/log/" |
| 2699 | logFiles = [ "karaf.log", "karaf.log.1" ] |
| 2700 | # NOTE: must end in / |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2701 | for f in logFiles: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2702 | for node in main.nodes: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2703 | dstName = main.logdir + "/" + node.name + "-" + f |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 2704 | main.ONOSbench.secureCopy( node.user_name, node.ip_address, |
| 2705 | logFolder + f, dstName ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2706 | # std*.log's |
| 2707 | # NOTE: must end in / |
| 2708 | logFolder = "/opt/onos/var/" |
| 2709 | logFiles = [ "stderr.log", "stdout.log" ] |
| 2710 | # NOTE: must end in / |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2711 | for f in logFiles: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2712 | for node in main.nodes: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2713 | dstName = main.logdir + "/" + node.name + "-" + f |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 2714 | main.ONOSbench.secureCopy( node.user_name, node.ip_address, |
| 2715 | logFolder + f, dstName ) |
| 2716 | else: |
| 2717 | main.log.debug( "skipping saving log files" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2718 | |
| 2719 | main.step( "Stopping Mininet" ) |
| 2720 | mnResult = main.Mininet1.stopNet() |
| 2721 | utilities.assert_equals( expect=main.TRUE, actual=mnResult, |
| 2722 | onpass="Mininet stopped", |
| 2723 | onfail="MN cleanup NOT successful" ) |
| 2724 | |
| 2725 | main.step( "Checking ONOS Logs for errors" ) |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2726 | for node in main.nodes: |
Jon Hall | 96091e6 | 2015-09-21 17:34:17 -0700 | [diff] [blame] | 2727 | main.log.debug( "Checking logs for errors on " + node.name + ":" ) |
| 2728 | main.log.warn( main.ONOSbench.checkLogs( node.ip_address ) ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2729 | |
| 2730 | try: |
| 2731 | timerLog = open( main.logdir + "/Timers.csv", 'w') |
| 2732 | # Overwrite with empty line and close |
| 2733 | labels = "Gossip Intents, Restart" |
| 2734 | data = str( gossipTime ) + ", " + str( main.restartTime ) |
| 2735 | timerLog.write( labels + "\n" + data ) |
| 2736 | timerLog.close() |
| 2737 | except NameError, e: |
| 2738 | main.log.exception(e) |
| 2739 | |
| 2740 | def CASE14( self, main ): |
| 2741 | """ |
| 2742 | start election app on all onos nodes |
| 2743 | """ |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2744 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2745 | assert main, "main not defined" |
| 2746 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2747 | assert main.CLIs, "main.CLIs not defined" |
| 2748 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2749 | |
| 2750 | main.case("Start Leadership Election app") |
| 2751 | main.step( "Install leadership election app" ) |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2752 | onosCli = main.CLIs[ main.activeNodes[0] ] |
| 2753 | appResult = onosCli.activateApp( "org.onosproject.election" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2754 | utilities.assert_equals( |
| 2755 | expect=main.TRUE, |
| 2756 | actual=appResult, |
| 2757 | onpass="Election app installed", |
| 2758 | onfail="Something went wrong with installing Leadership election" ) |
| 2759 | |
| 2760 | main.step( "Run for election on each node" ) |
| 2761 | leaderResult = main.TRUE |
| 2762 | leaders = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2763 | for i in main.activeNodes: |
| 2764 | main.CLIs[i].electionTestRun() |
| 2765 | for i in main.activeNodes: |
| 2766 | cli = main.CLIs[i] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2767 | leader = cli.electionTestLeader() |
| 2768 | if leader is None or leader == main.FALSE: |
| 2769 | main.log.error( cli.name + ": Leader for the election app " + |
| 2770 | "should be an ONOS node, instead got '" + |
| 2771 | str( leader ) + "'" ) |
| 2772 | leaderResult = main.FALSE |
| 2773 | leaders.append( leader ) |
| 2774 | utilities.assert_equals( |
| 2775 | expect=main.TRUE, |
| 2776 | actual=leaderResult, |
| 2777 | onpass="Successfully ran for leadership", |
| 2778 | onfail="Failed to run for leadership" ) |
| 2779 | |
| 2780 | main.step( "Check that each node shows the same leader" ) |
| 2781 | sameLeader = main.TRUE |
| 2782 | if len( set( leaders ) ) != 1: |
| 2783 | sameLeader = main.FALSE |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2784 | main.log.error( "Results of electionTestLeader is order of main.CLIs:" + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2785 | str( leaders ) ) |
| 2786 | utilities.assert_equals( |
| 2787 | expect=main.TRUE, |
| 2788 | actual=sameLeader, |
| 2789 | onpass="Leadership is consistent for the election topic", |
| 2790 | onfail="Nodes have different leaders" ) |
| 2791 | |
| 2792 | def CASE15( self, main ): |
| 2793 | """ |
| 2794 | Check that Leadership Election is still functional |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2795 | 15.1 Run election on each node |
| 2796 | 15.2 Check that each node has the same leaders and candidates |
| 2797 | 15.3 Find current leader and withdraw |
| 2798 | 15.4 Check that a new node was elected leader |
| 2799 | 15.5 Check that that new leader was the candidate of old leader |
| 2800 | 15.6 Run for election on old leader |
| 2801 | 15.7 Check that oldLeader is a candidate, and leader if only 1 node |
| 2802 | 15.8 Make sure that the old leader was added to the candidate list |
| 2803 | |
| 2804 | old and new variable prefixes refer to data from before vs after |
| 2805 | withdrawl and later before withdrawl vs after re-election |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2806 | """ |
| 2807 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2808 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2809 | assert main, "main not defined" |
| 2810 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 2811 | assert main.CLIs, "main.CLIs not defined" |
| 2812 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2813 | |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2814 | description = "Check that Leadership Election is still functional" |
| 2815 | main.case( description ) |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2816 | # NOTE: Need to re-run since being a canidate is not persistant |
| 2817 | # TODO: add check for "Command not found:" in the driver, this |
| 2818 | # means the election test app isn't loaded |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2819 | |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2820 | oldLeaders = [] # leaders by node before withdrawl from candidates |
| 2821 | newLeaders = [] # leaders by node after withdrawl from candidates |
| 2822 | oldAllCandidates = [] # list of lists of each nodes' candidates before |
| 2823 | newAllCandidates = [] # list of lists of each nodes' candidates after |
| 2824 | oldCandidates = [] # list of candidates from node 0 before withdrawl |
| 2825 | newCandidates = [] # list of candidates from node 0 after withdrawl |
| 2826 | oldLeader = '' # the old leader from oldLeaders, None if not same |
| 2827 | newLeader = '' # the new leaders fron newLoeaders, None if not same |
| 2828 | oldLeaderCLI = None # the CLI of the old leader used for re-electing |
| 2829 | expectNoLeader = False # True when there is only one leader |
| 2830 | if main.numCtrls == 1: |
| 2831 | expectNoLeader = True |
| 2832 | |
| 2833 | main.step( "Run for election on each node" ) |
| 2834 | electionResult = main.TRUE |
| 2835 | |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2836 | for i in main.activeNodes: # run test election on each node |
| 2837 | if main.CLIs[i].electionTestRun() == main.FALSE: |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2838 | electionResult = main.FALSE |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2839 | utilities.assert_equals( |
| 2840 | expect=main.TRUE, |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2841 | actual=electionResult, |
| 2842 | onpass="All nodes successfully ran for leadership", |
| 2843 | onfail="At least one node failed to run for leadership" ) |
| 2844 | |
acsmars | 3a72bde | 2015-09-02 14:16:22 -0700 | [diff] [blame] | 2845 | if electionResult == main.FALSE: |
| 2846 | main.log.error( |
| 2847 | "Skipping Test Case because Election Test App isn't loaded" ) |
| 2848 | main.skipCase() |
| 2849 | |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2850 | main.step( "Check that each node shows the same leader and candidates" ) |
| 2851 | sameResult = main.TRUE |
| 2852 | failMessage = "Nodes have different leaders" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2853 | for i in main.activeNodes: |
| 2854 | cli = main.CLIs[i] |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2855 | node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| 2856 | oldAllCandidates.append( node ) |
| 2857 | oldLeaders.append( node[ 0 ] ) |
| 2858 | oldCandidates = oldAllCandidates[ 0 ] |
| 2859 | |
| 2860 | # Check that each node has the same leader. Defines oldLeader |
| 2861 | if len( set( oldLeaders ) ) != 1: |
| 2862 | sameResult = main.FALSE |
| 2863 | main.log.error( "More than one leader present:" + str( oldLeaders ) ) |
| 2864 | oldLeader = None |
| 2865 | else: |
| 2866 | oldLeader = oldLeaders[ 0 ] |
| 2867 | |
| 2868 | # Check that each node's candidate list is the same |
acsmars | 29233db | 2015-11-04 11:15:00 -0800 | [diff] [blame] | 2869 | candidateDiscrepancy = False # Boolean of candidate mismatches |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2870 | for candidates in oldAllCandidates: |
| 2871 | if set( candidates ) != set( oldCandidates ): |
| 2872 | sameResult = main.FALSE |
acsmars | 29233db | 2015-11-04 11:15:00 -0800 | [diff] [blame] | 2873 | candidateDiscrepancy = True |
| 2874 | |
| 2875 | if candidateDiscrepancy: |
| 2876 | failMessage += " and candidates" |
| 2877 | |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2878 | utilities.assert_equals( |
| 2879 | expect=main.TRUE, |
| 2880 | actual=sameResult, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2881 | onpass="Leadership is consistent for the election topic", |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2882 | onfail=failMessage ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2883 | |
| 2884 | main.step( "Find current leader and withdraw" ) |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2885 | withdrawResult = main.TRUE |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2886 | # do some sanity checking on leader before using it |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2887 | if oldLeader is None: |
| 2888 | main.log.error( "Leadership isn't consistent." ) |
| 2889 | withdrawResult = main.FALSE |
| 2890 | # Get the CLI of the oldLeader |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2891 | for i in main.activeNodes: |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2892 | if oldLeader == main.nodes[ i ].ip_address: |
| 2893 | oldLeaderCLI = main.CLIs[ i ] |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2894 | break |
| 2895 | else: # FOR/ELSE statement |
| 2896 | main.log.error( "Leader election, could not find current leader" ) |
| 2897 | if oldLeader: |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2898 | withdrawResult = oldLeaderCLI.electionTestWithdraw() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2899 | utilities.assert_equals( |
| 2900 | expect=main.TRUE, |
| 2901 | actual=withdrawResult, |
| 2902 | onpass="Node was withdrawn from election", |
| 2903 | onfail="Node was not withdrawn from election" ) |
| 2904 | |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2905 | main.step( "Check that a new node was elected leader" ) |
| 2906 | |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2907 | # FIXME: use threads |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2908 | newLeaderResult = main.TRUE |
| 2909 | failMessage = "Nodes have different leaders" |
| 2910 | |
| 2911 | # Get new leaders and candidates |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2912 | for i in main.activeNodes: |
| 2913 | cli = main.CLIs[i] |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2914 | node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| 2915 | # elections might no have finished yet |
| 2916 | if node[ 0 ] == 'none' and not expectNoLeader: |
| 2917 | main.log.info( "Node has no leader, waiting 5 seconds to be " + |
| 2918 | "sure elections are complete." ) |
| 2919 | time.sleep(5) |
| 2920 | node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| 2921 | # election still isn't done or there is a problem |
| 2922 | if node[ 0 ] == 'none': |
| 2923 | main.log.error( "No leader was elected on at least 1 node" ) |
| 2924 | newLeaderResult = main.FALSE |
| 2925 | newAllCandidates.append( node ) |
| 2926 | newLeaders.append( node[ 0 ] ) |
| 2927 | newCandidates = newAllCandidates[ 0 ] |
| 2928 | |
| 2929 | # Check that each node has the same leader. Defines newLeader |
| 2930 | if len( set( newLeaders ) ) != 1: |
| 2931 | newLeaderResult = main.FALSE |
| 2932 | main.log.error( "Nodes have different leaders: " + |
| 2933 | str( newLeaders ) ) |
| 2934 | newLeader = None |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2935 | else: |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2936 | newLeader = newLeaders[ 0 ] |
| 2937 | |
| 2938 | # Check that each node's candidate list is the same |
| 2939 | for candidates in newAllCandidates: |
| 2940 | if set( candidates ) != set( newCandidates ): |
| 2941 | newLeaderResult = main.FALSE |
Jon Hall | ceb4abb | 2015-09-25 12:03:06 -0700 | [diff] [blame] | 2942 | main.log.error( "Discrepancy in candidate lists detected" ) |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2943 | |
| 2944 | # Check that the new leader is not the older leader, which was withdrawn |
| 2945 | if newLeader == oldLeader: |
| 2946 | newLeaderResult = main.FALSE |
| 2947 | main.log.error( "All nodes still see old leader: " + oldLeader + |
| 2948 | " as the current leader" ) |
| 2949 | |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2950 | utilities.assert_equals( |
| 2951 | expect=main.TRUE, |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2952 | actual=newLeaderResult, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2953 | onpass="Leadership election passed", |
| 2954 | onfail="Something went wrong with Leadership election" ) |
| 2955 | |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2956 | main.step( "Check that that new leader was the candidate of old leader") |
| 2957 | # candidates[ 2 ] should be come the top candidate after withdrawl |
| 2958 | correctCandidateResult = main.TRUE |
| 2959 | if expectNoLeader: |
| 2960 | if newLeader == 'none': |
| 2961 | main.log.info( "No leader expected. None found. Pass" ) |
| 2962 | correctCandidateResult = main.TRUE |
| 2963 | else: |
| 2964 | main.log.info( "Expected no leader, got: " + str( newLeader ) ) |
| 2965 | correctCandidateResult = main.FALSE |
| 2966 | elif newLeader != oldCandidates[ 2 ]: |
| 2967 | correctCandidateResult = main.FALSE |
| 2968 | main.log.error( "Candidate " + newLeader + " was elected. " + |
| 2969 | oldCandidates[ 2 ] + " should have had priority." ) |
| 2970 | |
| 2971 | utilities.assert_equals( |
| 2972 | expect=main.TRUE, |
| 2973 | actual=correctCandidateResult, |
| 2974 | onpass="Correct Candidate Elected", |
| 2975 | onfail="Incorrect Candidate Elected" ) |
| 2976 | |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2977 | main.step( "Run for election on old leader( just so everyone " + |
| 2978 | "is in the hat )" ) |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2979 | if oldLeaderCLI is not None: |
| 2980 | runResult = oldLeaderCLI.electionTestRun() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2981 | else: |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2982 | main.log.error( "No old leader to re-elect" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2983 | runResult = main.FALSE |
| 2984 | utilities.assert_equals( |
| 2985 | expect=main.TRUE, |
| 2986 | actual=runResult, |
| 2987 | onpass="App re-ran for election", |
| 2988 | onfail="App failed to run for election" ) |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2989 | main.step( |
| 2990 | "Check that oldLeader is a candidate, and leader if only 1 node" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 2991 | # verify leader didn't just change |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 2992 | positionResult = main.TRUE |
| 2993 | # Get new leaders and candidates, wait if oldLeader is not a candidate yet |
| 2994 | |
| 2995 | # Reset and reuse the new candidate and leaders lists |
| 2996 | newAllCandidates = [] |
| 2997 | newCandidates = [] |
| 2998 | newLeaders = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 2999 | for i in main.activeNodes: |
| 3000 | cli = main.CLIs[i] |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 3001 | node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| 3002 | if oldLeader not in node: # election might no have finished yet |
| 3003 | main.log.info( "Old Leader not elected, waiting 5 seconds to " + |
| 3004 | "be sure elections are complete" ) |
| 3005 | time.sleep(5) |
| 3006 | node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| 3007 | if oldLeader not in node: # election still isn't done, errors |
| 3008 | main.log.error( |
| 3009 | "Old leader was not elected on at least one node" ) |
| 3010 | positionResult = main.FALSE |
| 3011 | newAllCandidates.append( node ) |
| 3012 | newLeaders.append( node[ 0 ] ) |
| 3013 | newCandidates = newAllCandidates[ 0 ] |
| 3014 | |
| 3015 | # Check that each node has the same leader. Defines newLeader |
| 3016 | if len( set( newLeaders ) ) != 1: |
| 3017 | positionResult = main.FALSE |
| 3018 | main.log.error( "Nodes have different leaders: " + |
| 3019 | str( newLeaders ) ) |
| 3020 | newLeader = None |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3021 | else: |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 3022 | newLeader = newLeaders[ 0 ] |
| 3023 | |
| 3024 | # Check that each node's candidate list is the same |
| 3025 | for candidates in newAllCandidates: |
| 3026 | if set( candidates ) != set( newCandidates ): |
| 3027 | newLeaderResult = main.FALSE |
Jon Hall | ceb4abb | 2015-09-25 12:03:06 -0700 | [diff] [blame] | 3028 | main.log.error( "Discrepancy in candidate lists detected" ) |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 3029 | |
| 3030 | # Check that the re-elected node is last on the candidate List |
| 3031 | if oldLeader != newCandidates[ -1 ]: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3032 | main.log.error( "Old Leader (" + oldLeader + ") not in the proper position " + |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 3033 | str( newCandidates ) ) |
| 3034 | positionResult = main.FALSE |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3035 | |
| 3036 | utilities.assert_equals( |
| 3037 | expect=main.TRUE, |
acsmars | 71adceb | 2015-08-31 15:09:26 -0700 | [diff] [blame] | 3038 | actual=positionResult, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3039 | onpass="Old leader successfully re-ran for election", |
| 3040 | onfail="Something went wrong with Leadership election after " + |
| 3041 | "the old leader re-ran for election" ) |
| 3042 | |
| 3043 | def CASE16( self, main ): |
| 3044 | """ |
| 3045 | Install Distributed Primitives app |
| 3046 | """ |
| 3047 | import time |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3048 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3049 | assert main, "main not defined" |
| 3050 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3051 | assert main.CLIs, "main.CLIs not defined" |
| 3052 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3053 | |
| 3054 | # Variables for the distributed primitives tests |
| 3055 | global pCounterName |
| 3056 | global iCounterName |
| 3057 | global pCounterValue |
| 3058 | global iCounterValue |
| 3059 | global onosSet |
| 3060 | global onosSetName |
| 3061 | pCounterName = "TestON-Partitions" |
| 3062 | iCounterName = "TestON-inMemory" |
| 3063 | pCounterValue = 0 |
| 3064 | iCounterValue = 0 |
| 3065 | onosSet = set([]) |
| 3066 | onosSetName = "TestON-set" |
| 3067 | |
| 3068 | description = "Install Primitives app" |
| 3069 | main.case( description ) |
| 3070 | main.step( "Install Primitives app" ) |
| 3071 | appName = "org.onosproject.distributedprimitives" |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3072 | node = main.activeNodes[0] |
| 3073 | appResults = main.CLIs[node].activateApp( appName ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3074 | utilities.assert_equals( expect=main.TRUE, |
| 3075 | actual=appResults, |
| 3076 | onpass="Primitives app activated", |
| 3077 | onfail="Primitives app not activated" ) |
| 3078 | time.sleep( 5 ) # To allow all nodes to activate |
| 3079 | |
| 3080 | def CASE17( self, main ): |
| 3081 | """ |
| 3082 | Check for basic functionality with distributed primitives |
| 3083 | """ |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3084 | # Make sure variables are defined/set |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3085 | assert main.numCtrls, "main.numCtrls not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3086 | assert main, "main not defined" |
| 3087 | assert utilities.assert_equals, "utilities.assert_equals not defined" |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3088 | assert main.CLIs, "main.CLIs not defined" |
| 3089 | assert main.nodes, "main.nodes not defined" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3090 | assert pCounterName, "pCounterName not defined" |
| 3091 | assert iCounterName, "iCounterName not defined" |
| 3092 | assert onosSetName, "onosSetName not defined" |
| 3093 | # NOTE: assert fails if value is 0/None/Empty/False |
| 3094 | try: |
| 3095 | pCounterValue |
| 3096 | except NameError: |
| 3097 | main.log.error( "pCounterValue not defined, setting to 0" ) |
| 3098 | pCounterValue = 0 |
| 3099 | try: |
| 3100 | iCounterValue |
| 3101 | except NameError: |
| 3102 | main.log.error( "iCounterValue not defined, setting to 0" ) |
| 3103 | iCounterValue = 0 |
| 3104 | try: |
| 3105 | onosSet |
| 3106 | except NameError: |
| 3107 | main.log.error( "onosSet not defined, setting to empty Set" ) |
| 3108 | onosSet = set([]) |
| 3109 | # Variables for the distributed primitives tests. These are local only |
| 3110 | addValue = "a" |
| 3111 | addAllValue = "a b c d e f" |
| 3112 | retainValue = "c d e f" |
| 3113 | |
| 3114 | description = "Check for basic functionality with distributed " +\ |
| 3115 | "primitives" |
| 3116 | main.case( description ) |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3117 | main.caseExplanation = "Test the methods of the distributed " +\ |
| 3118 | "primitives (counters and sets) throught the cli" |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3119 | # DISTRIBUTED ATOMIC COUNTERS |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3120 | # Partitioned counters |
| 3121 | main.step( "Increment then get a default counter on each node" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3122 | pCounters = [] |
| 3123 | threads = [] |
| 3124 | addedPValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3125 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3126 | t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| 3127 | name="counterAddAndGet-" + str( i ), |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3128 | args=[ pCounterName ] ) |
| 3129 | pCounterValue += 1 |
| 3130 | addedPValues.append( pCounterValue ) |
| 3131 | threads.append( t ) |
| 3132 | t.start() |
| 3133 | |
| 3134 | for t in threads: |
| 3135 | t.join() |
| 3136 | pCounters.append( t.result ) |
| 3137 | # Check that counter incremented numController times |
| 3138 | pCounterResults = True |
| 3139 | for i in addedPValues: |
| 3140 | tmpResult = i in pCounters |
| 3141 | pCounterResults = pCounterResults and tmpResult |
| 3142 | if not tmpResult: |
| 3143 | main.log.error( str( i ) + " is not in partitioned " |
| 3144 | "counter incremented results" ) |
| 3145 | utilities.assert_equals( expect=True, |
| 3146 | actual=pCounterResults, |
| 3147 | onpass="Default counter incremented", |
| 3148 | onfail="Error incrementing default" + |
| 3149 | " counter" ) |
| 3150 | |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3151 | main.step( "Get then Increment a default counter on each node" ) |
| 3152 | pCounters = [] |
| 3153 | threads = [] |
| 3154 | addedPValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3155 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3156 | t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| 3157 | name="counterGetAndAdd-" + str( i ), |
| 3158 | args=[ pCounterName ] ) |
| 3159 | addedPValues.append( pCounterValue ) |
| 3160 | pCounterValue += 1 |
| 3161 | threads.append( t ) |
| 3162 | t.start() |
| 3163 | |
| 3164 | for t in threads: |
| 3165 | t.join() |
| 3166 | pCounters.append( t.result ) |
| 3167 | # Check that counter incremented numController times |
| 3168 | pCounterResults = True |
| 3169 | for i in addedPValues: |
| 3170 | tmpResult = i in pCounters |
| 3171 | pCounterResults = pCounterResults and tmpResult |
| 3172 | if not tmpResult: |
| 3173 | main.log.error( str( i ) + " is not in partitioned " |
| 3174 | "counter incremented results" ) |
| 3175 | utilities.assert_equals( expect=True, |
| 3176 | actual=pCounterResults, |
| 3177 | onpass="Default counter incremented", |
| 3178 | onfail="Error incrementing default" + |
| 3179 | " counter" ) |
| 3180 | |
| 3181 | main.step( "Counters we added have the correct values" ) |
| 3182 | incrementCheck = main.Counters.counterCheck( pCounterName, pCounterValue ) |
| 3183 | utilities.assert_equals( expect=main.TRUE, |
| 3184 | actual=incrementCheck, |
| 3185 | onpass="Added counters are correct", |
| 3186 | onfail="Added counters are incorrect" ) |
| 3187 | |
| 3188 | main.step( "Add -8 to then get a default counter on each node" ) |
| 3189 | pCounters = [] |
| 3190 | threads = [] |
| 3191 | addedPValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3192 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3193 | t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| 3194 | name="counterIncrement-" + str( i ), |
| 3195 | args=[ pCounterName ], |
| 3196 | kwargs={ "delta": -8 } ) |
| 3197 | pCounterValue += -8 |
| 3198 | addedPValues.append( pCounterValue ) |
| 3199 | threads.append( t ) |
| 3200 | t.start() |
| 3201 | |
| 3202 | for t in threads: |
| 3203 | t.join() |
| 3204 | pCounters.append( t.result ) |
| 3205 | # Check that counter incremented numController times |
| 3206 | pCounterResults = True |
| 3207 | for i in addedPValues: |
| 3208 | tmpResult = i in pCounters |
| 3209 | pCounterResults = pCounterResults and tmpResult |
| 3210 | if not tmpResult: |
| 3211 | main.log.error( str( i ) + " is not in partitioned " |
| 3212 | "counter incremented results" ) |
| 3213 | utilities.assert_equals( expect=True, |
| 3214 | actual=pCounterResults, |
| 3215 | onpass="Default counter incremented", |
| 3216 | onfail="Error incrementing default" + |
| 3217 | " counter" ) |
| 3218 | |
| 3219 | main.step( "Add 5 to then get a default counter on each node" ) |
| 3220 | pCounters = [] |
| 3221 | threads = [] |
| 3222 | addedPValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3223 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3224 | t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| 3225 | name="counterIncrement-" + str( i ), |
| 3226 | args=[ pCounterName ], |
| 3227 | kwargs={ "delta": 5 } ) |
| 3228 | pCounterValue += 5 |
| 3229 | addedPValues.append( pCounterValue ) |
| 3230 | threads.append( t ) |
| 3231 | t.start() |
| 3232 | |
| 3233 | for t in threads: |
| 3234 | t.join() |
| 3235 | pCounters.append( t.result ) |
| 3236 | # Check that counter incremented numController times |
| 3237 | pCounterResults = True |
| 3238 | for i in addedPValues: |
| 3239 | tmpResult = i in pCounters |
| 3240 | pCounterResults = pCounterResults and tmpResult |
| 3241 | if not tmpResult: |
| 3242 | main.log.error( str( i ) + " is not in partitioned " |
| 3243 | "counter incremented results" ) |
| 3244 | utilities.assert_equals( expect=True, |
| 3245 | actual=pCounterResults, |
| 3246 | onpass="Default counter incremented", |
| 3247 | onfail="Error incrementing default" + |
| 3248 | " counter" ) |
| 3249 | |
| 3250 | main.step( "Get then add 5 to a default counter on each node" ) |
| 3251 | pCounters = [] |
| 3252 | threads = [] |
| 3253 | addedPValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3254 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3255 | t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| 3256 | name="counterIncrement-" + str( i ), |
| 3257 | args=[ pCounterName ], |
| 3258 | kwargs={ "delta": 5 } ) |
| 3259 | addedPValues.append( pCounterValue ) |
| 3260 | pCounterValue += 5 |
| 3261 | threads.append( t ) |
| 3262 | t.start() |
| 3263 | |
| 3264 | for t in threads: |
| 3265 | t.join() |
| 3266 | pCounters.append( t.result ) |
| 3267 | # Check that counter incremented numController times |
| 3268 | pCounterResults = True |
| 3269 | for i in addedPValues: |
| 3270 | tmpResult = i in pCounters |
| 3271 | pCounterResults = pCounterResults and tmpResult |
| 3272 | if not tmpResult: |
| 3273 | main.log.error( str( i ) + " is not in partitioned " |
| 3274 | "counter incremented results" ) |
| 3275 | utilities.assert_equals( expect=True, |
| 3276 | actual=pCounterResults, |
| 3277 | onpass="Default counter incremented", |
| 3278 | onfail="Error incrementing default" + |
| 3279 | " counter" ) |
| 3280 | |
| 3281 | main.step( "Counters we added have the correct values" ) |
| 3282 | incrementCheck = main.Counters.counterCheck( pCounterName, pCounterValue ) |
| 3283 | utilities.assert_equals( expect=main.TRUE, |
| 3284 | actual=incrementCheck, |
| 3285 | onpass="Added counters are correct", |
| 3286 | onfail="Added counters are incorrect" ) |
| 3287 | |
| 3288 | # In-Memory counters |
| 3289 | main.step( "Increment and get an in-memory counter on each node" ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3290 | iCounters = [] |
| 3291 | addedIValues = [] |
| 3292 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3293 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3294 | t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3295 | name="icounterIncrement-" + str( i ), |
| 3296 | args=[ iCounterName ], |
| 3297 | kwargs={ "inMemory": True } ) |
| 3298 | iCounterValue += 1 |
| 3299 | addedIValues.append( iCounterValue ) |
| 3300 | threads.append( t ) |
| 3301 | t.start() |
| 3302 | |
| 3303 | for t in threads: |
| 3304 | t.join() |
| 3305 | iCounters.append( t.result ) |
| 3306 | # Check that counter incremented numController times |
| 3307 | iCounterResults = True |
| 3308 | for i in addedIValues: |
| 3309 | tmpResult = i in iCounters |
| 3310 | iCounterResults = iCounterResults and tmpResult |
| 3311 | if not tmpResult: |
| 3312 | main.log.error( str( i ) + " is not in the in-memory " |
| 3313 | "counter incremented results" ) |
| 3314 | utilities.assert_equals( expect=True, |
| 3315 | actual=iCounterResults, |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3316 | onpass="In-memory counter incremented", |
| 3317 | onfail="Error incrementing in-memory" + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3318 | " counter" ) |
| 3319 | |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3320 | main.step( "Get then Increment a in-memory counter on each node" ) |
| 3321 | iCounters = [] |
| 3322 | threads = [] |
| 3323 | addedIValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3324 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3325 | t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| 3326 | name="counterGetAndAdd-" + str( i ), |
| 3327 | args=[ iCounterName ], |
| 3328 | kwargs={ "inMemory": True } ) |
| 3329 | addedIValues.append( iCounterValue ) |
| 3330 | iCounterValue += 1 |
| 3331 | threads.append( t ) |
| 3332 | t.start() |
| 3333 | |
| 3334 | for t in threads: |
| 3335 | t.join() |
| 3336 | iCounters.append( t.result ) |
| 3337 | # Check that counter incremented numController times |
| 3338 | iCounterResults = True |
| 3339 | for i in addedIValues: |
| 3340 | tmpResult = i in iCounters |
| 3341 | iCounterResults = iCounterResults and tmpResult |
| 3342 | if not tmpResult: |
| 3343 | main.log.error( str( i ) + " is not in in-memory " |
| 3344 | "counter incremented results" ) |
| 3345 | utilities.assert_equals( expect=True, |
| 3346 | actual=iCounterResults, |
| 3347 | onpass="In-memory counter incremented", |
| 3348 | onfail="Error incrementing in-memory" + |
| 3349 | " counter" ) |
| 3350 | |
| 3351 | main.step( "Counters we added have the correct values" ) |
| 3352 | incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue ) |
| 3353 | utilities.assert_equals( expect=main.TRUE, |
| 3354 | actual=incrementCheck, |
| 3355 | onpass="Added counters are correct", |
| 3356 | onfail="Added counters are incorrect" ) |
| 3357 | |
| 3358 | main.step( "Add -8 to then get a in-memory counter on each node" ) |
| 3359 | iCounters = [] |
| 3360 | threads = [] |
| 3361 | addedIValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3362 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3363 | t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| 3364 | name="counterIncrement-" + str( i ), |
| 3365 | args=[ iCounterName ], |
| 3366 | kwargs={ "delta": -8, "inMemory": True } ) |
| 3367 | iCounterValue += -8 |
| 3368 | addedIValues.append( iCounterValue ) |
| 3369 | threads.append( t ) |
| 3370 | t.start() |
| 3371 | |
| 3372 | for t in threads: |
| 3373 | t.join() |
| 3374 | iCounters.append( t.result ) |
| 3375 | # Check that counter incremented numController times |
| 3376 | iCounterResults = True |
| 3377 | for i in addedIValues: |
| 3378 | tmpResult = i in iCounters |
| 3379 | iCounterResults = iCounterResults and tmpResult |
| 3380 | if not tmpResult: |
| 3381 | main.log.error( str( i ) + " is not in in-memory " |
| 3382 | "counter incremented results" ) |
| 3383 | utilities.assert_equals( expect=True, |
| 3384 | actual=pCounterResults, |
| 3385 | onpass="In-memory counter incremented", |
| 3386 | onfail="Error incrementing in-memory" + |
| 3387 | " counter" ) |
| 3388 | |
| 3389 | main.step( "Add 5 to then get a in-memory counter on each node" ) |
| 3390 | iCounters = [] |
| 3391 | threads = [] |
| 3392 | addedIValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3393 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3394 | t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| 3395 | name="counterIncrement-" + str( i ), |
| 3396 | args=[ iCounterName ], |
| 3397 | kwargs={ "delta": 5, "inMemory": True } ) |
| 3398 | iCounterValue += 5 |
| 3399 | addedIValues.append( iCounterValue ) |
| 3400 | threads.append( t ) |
| 3401 | t.start() |
| 3402 | |
| 3403 | for t in threads: |
| 3404 | t.join() |
| 3405 | iCounters.append( t.result ) |
| 3406 | # Check that counter incremented numController times |
| 3407 | iCounterResults = True |
| 3408 | for i in addedIValues: |
| 3409 | tmpResult = i in iCounters |
| 3410 | iCounterResults = iCounterResults and tmpResult |
| 3411 | if not tmpResult: |
| 3412 | main.log.error( str( i ) + " is not in in-memory " |
| 3413 | "counter incremented results" ) |
| 3414 | utilities.assert_equals( expect=True, |
| 3415 | actual=pCounterResults, |
| 3416 | onpass="In-memory counter incremented", |
| 3417 | onfail="Error incrementing in-memory" + |
| 3418 | " counter" ) |
| 3419 | |
| 3420 | main.step( "Get then add 5 to a in-memory counter on each node" ) |
| 3421 | iCounters = [] |
| 3422 | threads = [] |
| 3423 | addedIValues = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3424 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3425 | t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| 3426 | name="counterIncrement-" + str( i ), |
| 3427 | args=[ iCounterName ], |
| 3428 | kwargs={ "delta": 5, "inMemory": True } ) |
| 3429 | addedIValues.append( iCounterValue ) |
| 3430 | iCounterValue += 5 |
| 3431 | threads.append( t ) |
| 3432 | t.start() |
| 3433 | |
| 3434 | for t in threads: |
| 3435 | t.join() |
| 3436 | iCounters.append( t.result ) |
| 3437 | # Check that counter incremented numController times |
| 3438 | iCounterResults = True |
| 3439 | for i in addedIValues: |
| 3440 | tmpResult = i in iCounters |
| 3441 | iCounterResults = iCounterResults and tmpResult |
| 3442 | if not tmpResult: |
| 3443 | main.log.error( str( i ) + " is not in in-memory " |
| 3444 | "counter incremented results" ) |
| 3445 | utilities.assert_equals( expect=True, |
| 3446 | actual=iCounterResults, |
| 3447 | onpass="In-memory counter incremented", |
| 3448 | onfail="Error incrementing in-memory" + |
| 3449 | " counter" ) |
| 3450 | |
| 3451 | main.step( "Counters we added have the correct values" ) |
| 3452 | incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue ) |
| 3453 | utilities.assert_equals( expect=main.TRUE, |
| 3454 | actual=incrementCheck, |
| 3455 | onpass="Added counters are correct", |
| 3456 | onfail="Added counters are incorrect" ) |
| 3457 | |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3458 | main.step( "Check counters are consistant across nodes" ) |
Jon Hall | 3b489db | 2015-10-05 14:38:37 -0700 | [diff] [blame] | 3459 | onosCounters, consistentCounterResults = main.Counters.consistentCheck() |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3460 | utilities.assert_equals( expect=main.TRUE, |
| 3461 | actual=consistentCounterResults, |
| 3462 | onpass="ONOS counters are consistent " + |
| 3463 | "across nodes", |
| 3464 | onfail="ONOS Counters are inconsistent " + |
| 3465 | "across nodes" ) |
| 3466 | |
| 3467 | main.step( "Counters we added have the correct values" ) |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3468 | incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue ) |
| 3469 | incrementCheck = incrementCheck and \ |
| 3470 | main.Counters.counterCheck( iCounterName, iCounterValue ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3471 | utilities.assert_equals( expect=main.TRUE, |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3472 | actual=incrementCheck, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3473 | onpass="Added counters are correct", |
| 3474 | onfail="Added counters are incorrect" ) |
| 3475 | # DISTRIBUTED SETS |
| 3476 | main.step( "Distributed Set get" ) |
| 3477 | size = len( onosSet ) |
| 3478 | getResponses = [] |
| 3479 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3480 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3481 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3482 | name="setTestGet-" + str( i ), |
| 3483 | args=[ onosSetName ] ) |
| 3484 | threads.append( t ) |
| 3485 | t.start() |
| 3486 | for t in threads: |
| 3487 | t.join() |
| 3488 | getResponses.append( t.result ) |
| 3489 | |
| 3490 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3491 | for i in range( len( main.activeNodes ) ): |
| 3492 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3493 | if isinstance( getResponses[ i ], list): |
| 3494 | current = set( getResponses[ i ] ) |
| 3495 | if len( current ) == len( getResponses[ i ] ): |
| 3496 | # no repeats |
| 3497 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3498 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3499 | " has incorrect view" + |
| 3500 | " of set " + onosSetName + ":\n" + |
| 3501 | str( getResponses[ i ] ) ) |
| 3502 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 3503 | main.log.debug( "Actual: " + str( current ) ) |
| 3504 | getResults = main.FALSE |
| 3505 | else: |
| 3506 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3507 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3508 | " has repeat elements in" + |
| 3509 | " set " + onosSetName + ":\n" + |
| 3510 | str( getResponses[ i ] ) ) |
| 3511 | getResults = main.FALSE |
| 3512 | elif getResponses[ i ] == main.ERROR: |
| 3513 | getResults = main.FALSE |
| 3514 | utilities.assert_equals( expect=main.TRUE, |
| 3515 | actual=getResults, |
| 3516 | onpass="Set elements are correct", |
| 3517 | onfail="Set elements are incorrect" ) |
| 3518 | |
| 3519 | main.step( "Distributed Set size" ) |
| 3520 | sizeResponses = [] |
| 3521 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3522 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3523 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3524 | name="setTestSize-" + str( i ), |
| 3525 | args=[ onosSetName ] ) |
| 3526 | threads.append( t ) |
| 3527 | t.start() |
| 3528 | for t in threads: |
| 3529 | t.join() |
| 3530 | sizeResponses.append( t.result ) |
| 3531 | |
| 3532 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3533 | for i in range( len( main.activeNodes ) ): |
| 3534 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3535 | if size != sizeResponses[ i ]: |
| 3536 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3537 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3538 | " expected a size of " + str( size ) + |
| 3539 | " for set " + onosSetName + |
| 3540 | " but got " + str( sizeResponses[ i ] ) ) |
| 3541 | utilities.assert_equals( expect=main.TRUE, |
| 3542 | actual=sizeResults, |
| 3543 | onpass="Set sizes are correct", |
| 3544 | onfail="Set sizes are incorrect" ) |
| 3545 | |
| 3546 | main.step( "Distributed Set add()" ) |
| 3547 | onosSet.add( addValue ) |
| 3548 | addResponses = [] |
| 3549 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3550 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3551 | t = main.Thread( target=main.CLIs[i].setTestAdd, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3552 | name="setTestAdd-" + str( i ), |
| 3553 | args=[ onosSetName, addValue ] ) |
| 3554 | threads.append( t ) |
| 3555 | t.start() |
| 3556 | for t in threads: |
| 3557 | t.join() |
| 3558 | addResponses.append( t.result ) |
| 3559 | |
| 3560 | # main.TRUE = successfully changed the set |
| 3561 | # main.FALSE = action resulted in no change in set |
| 3562 | # main.ERROR - Some error in executing the function |
| 3563 | addResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3564 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3565 | if addResponses[ i ] == main.TRUE: |
| 3566 | # All is well |
| 3567 | pass |
| 3568 | elif addResponses[ i ] == main.FALSE: |
| 3569 | # Already in set, probably fine |
| 3570 | pass |
| 3571 | elif addResponses[ i ] == main.ERROR: |
| 3572 | # Error in execution |
| 3573 | addResults = main.FALSE |
| 3574 | else: |
| 3575 | # unexpected result |
| 3576 | addResults = main.FALSE |
| 3577 | if addResults != main.TRUE: |
| 3578 | main.log.error( "Error executing set add" ) |
| 3579 | |
| 3580 | # Check if set is still correct |
| 3581 | size = len( onosSet ) |
| 3582 | getResponses = [] |
| 3583 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3584 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3585 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3586 | name="setTestGet-" + str( i ), |
| 3587 | args=[ onosSetName ] ) |
| 3588 | threads.append( t ) |
| 3589 | t.start() |
| 3590 | for t in threads: |
| 3591 | t.join() |
| 3592 | getResponses.append( t.result ) |
| 3593 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3594 | for i in range( len( main.activeNodes ) ): |
| 3595 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3596 | if isinstance( getResponses[ i ], list): |
| 3597 | current = set( getResponses[ i ] ) |
| 3598 | if len( current ) == len( getResponses[ i ] ): |
| 3599 | # no repeats |
| 3600 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3601 | main.log.error( "ONOS" + node + " has incorrect view" + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3602 | " of set " + onosSetName + ":\n" + |
| 3603 | str( getResponses[ i ] ) ) |
| 3604 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 3605 | main.log.debug( "Actual: " + str( current ) ) |
| 3606 | getResults = main.FALSE |
| 3607 | else: |
| 3608 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3609 | main.log.error( "ONOS" + node + " has repeat elements in" + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3610 | " set " + onosSetName + ":\n" + |
| 3611 | str( getResponses[ i ] ) ) |
| 3612 | getResults = main.FALSE |
| 3613 | elif getResponses[ i ] == main.ERROR: |
| 3614 | getResults = main.FALSE |
| 3615 | sizeResponses = [] |
| 3616 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3617 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3618 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3619 | name="setTestSize-" + str( i ), |
| 3620 | args=[ onosSetName ] ) |
| 3621 | threads.append( t ) |
| 3622 | t.start() |
| 3623 | for t in threads: |
| 3624 | t.join() |
| 3625 | sizeResponses.append( t.result ) |
| 3626 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3627 | for i in range( len( main.activeNodes ) ): |
| 3628 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3629 | if size != sizeResponses[ i ]: |
| 3630 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3631 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3632 | " expected a size of " + str( size ) + |
| 3633 | " for set " + onosSetName + |
| 3634 | " but got " + str( sizeResponses[ i ] ) ) |
| 3635 | addResults = addResults and getResults and sizeResults |
| 3636 | utilities.assert_equals( expect=main.TRUE, |
| 3637 | actual=addResults, |
| 3638 | onpass="Set add correct", |
| 3639 | onfail="Set add was incorrect" ) |
| 3640 | |
| 3641 | main.step( "Distributed Set addAll()" ) |
| 3642 | onosSet.update( addAllValue.split() ) |
| 3643 | addResponses = [] |
| 3644 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3645 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3646 | t = main.Thread( target=main.CLIs[i].setTestAdd, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3647 | name="setTestAddAll-" + str( i ), |
| 3648 | args=[ onosSetName, addAllValue ] ) |
| 3649 | threads.append( t ) |
| 3650 | t.start() |
| 3651 | for t in threads: |
| 3652 | t.join() |
| 3653 | addResponses.append( t.result ) |
| 3654 | |
| 3655 | # main.TRUE = successfully changed the set |
| 3656 | # main.FALSE = action resulted in no change in set |
| 3657 | # main.ERROR - Some error in executing the function |
| 3658 | addAllResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3659 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3660 | if addResponses[ i ] == main.TRUE: |
| 3661 | # All is well |
| 3662 | pass |
| 3663 | elif addResponses[ i ] == main.FALSE: |
| 3664 | # Already in set, probably fine |
| 3665 | pass |
| 3666 | elif addResponses[ i ] == main.ERROR: |
| 3667 | # Error in execution |
| 3668 | addAllResults = main.FALSE |
| 3669 | else: |
| 3670 | # unexpected result |
| 3671 | addAllResults = main.FALSE |
| 3672 | if addAllResults != main.TRUE: |
| 3673 | main.log.error( "Error executing set addAll" ) |
| 3674 | |
| 3675 | # Check if set is still correct |
| 3676 | size = len( onosSet ) |
| 3677 | getResponses = [] |
| 3678 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3679 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3680 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3681 | name="setTestGet-" + str( i ), |
| 3682 | args=[ onosSetName ] ) |
| 3683 | threads.append( t ) |
| 3684 | t.start() |
| 3685 | for t in threads: |
| 3686 | t.join() |
| 3687 | getResponses.append( t.result ) |
| 3688 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3689 | for i in range( len( main.activeNodes ) ): |
| 3690 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3691 | if isinstance( getResponses[ i ], list): |
| 3692 | current = set( getResponses[ i ] ) |
| 3693 | if len( current ) == len( getResponses[ i ] ): |
| 3694 | # no repeats |
| 3695 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3696 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3697 | " has incorrect view" + |
| 3698 | " of set " + onosSetName + ":\n" + |
| 3699 | str( getResponses[ i ] ) ) |
| 3700 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 3701 | main.log.debug( "Actual: " + str( current ) ) |
| 3702 | getResults = main.FALSE |
| 3703 | else: |
| 3704 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3705 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3706 | " has repeat elements in" + |
| 3707 | " set " + onosSetName + ":\n" + |
| 3708 | str( getResponses[ i ] ) ) |
| 3709 | getResults = main.FALSE |
| 3710 | elif getResponses[ i ] == main.ERROR: |
| 3711 | getResults = main.FALSE |
| 3712 | sizeResponses = [] |
| 3713 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3714 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3715 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3716 | name="setTestSize-" + str( i ), |
| 3717 | args=[ onosSetName ] ) |
| 3718 | threads.append( t ) |
| 3719 | t.start() |
| 3720 | for t in threads: |
| 3721 | t.join() |
| 3722 | sizeResponses.append( t.result ) |
| 3723 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3724 | for i in range( len( main.activeNodes ) ): |
| 3725 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3726 | if size != sizeResponses[ i ]: |
| 3727 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3728 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3729 | " expected a size of " + str( size ) + |
| 3730 | " for set " + onosSetName + |
| 3731 | " but got " + str( sizeResponses[ i ] ) ) |
| 3732 | addAllResults = addAllResults and getResults and sizeResults |
| 3733 | utilities.assert_equals( expect=main.TRUE, |
| 3734 | actual=addAllResults, |
| 3735 | onpass="Set addAll correct", |
| 3736 | onfail="Set addAll was incorrect" ) |
| 3737 | |
| 3738 | main.step( "Distributed Set contains()" ) |
| 3739 | containsResponses = [] |
| 3740 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3741 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3742 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3743 | name="setContains-" + str( i ), |
| 3744 | args=[ onosSetName ], |
| 3745 | kwargs={ "values": addValue } ) |
| 3746 | threads.append( t ) |
| 3747 | t.start() |
| 3748 | for t in threads: |
| 3749 | t.join() |
| 3750 | # NOTE: This is the tuple |
| 3751 | containsResponses.append( t.result ) |
| 3752 | |
| 3753 | containsResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3754 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3755 | if containsResponses[ i ] == main.ERROR: |
| 3756 | containsResults = main.FALSE |
| 3757 | else: |
| 3758 | containsResults = containsResults and\ |
| 3759 | containsResponses[ i ][ 1 ] |
| 3760 | utilities.assert_equals( expect=main.TRUE, |
| 3761 | actual=containsResults, |
| 3762 | onpass="Set contains is functional", |
| 3763 | onfail="Set contains failed" ) |
| 3764 | |
| 3765 | main.step( "Distributed Set containsAll()" ) |
| 3766 | containsAllResponses = [] |
| 3767 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3768 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3769 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3770 | name="setContainsAll-" + str( i ), |
| 3771 | args=[ onosSetName ], |
| 3772 | kwargs={ "values": addAllValue } ) |
| 3773 | threads.append( t ) |
| 3774 | t.start() |
| 3775 | for t in threads: |
| 3776 | t.join() |
| 3777 | # NOTE: This is the tuple |
| 3778 | containsAllResponses.append( t.result ) |
| 3779 | |
| 3780 | containsAllResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3781 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3782 | if containsResponses[ i ] == main.ERROR: |
| 3783 | containsResults = main.FALSE |
| 3784 | else: |
| 3785 | containsResults = containsResults and\ |
| 3786 | containsResponses[ i ][ 1 ] |
| 3787 | utilities.assert_equals( expect=main.TRUE, |
| 3788 | actual=containsAllResults, |
| 3789 | onpass="Set containsAll is functional", |
| 3790 | onfail="Set containsAll failed" ) |
| 3791 | |
| 3792 | main.step( "Distributed Set remove()" ) |
| 3793 | onosSet.remove( addValue ) |
| 3794 | removeResponses = [] |
| 3795 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3796 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3797 | t = main.Thread( target=main.CLIs[i].setTestRemove, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3798 | name="setTestRemove-" + str( i ), |
| 3799 | args=[ onosSetName, addValue ] ) |
| 3800 | threads.append( t ) |
| 3801 | t.start() |
| 3802 | for t in threads: |
| 3803 | t.join() |
| 3804 | removeResponses.append( t.result ) |
| 3805 | |
| 3806 | # main.TRUE = successfully changed the set |
| 3807 | # main.FALSE = action resulted in no change in set |
| 3808 | # main.ERROR - Some error in executing the function |
| 3809 | removeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3810 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3811 | if removeResponses[ i ] == main.TRUE: |
| 3812 | # All is well |
| 3813 | pass |
| 3814 | elif removeResponses[ i ] == main.FALSE: |
| 3815 | # not in set, probably fine |
| 3816 | pass |
| 3817 | elif removeResponses[ i ] == main.ERROR: |
| 3818 | # Error in execution |
| 3819 | removeResults = main.FALSE |
| 3820 | else: |
| 3821 | # unexpected result |
| 3822 | removeResults = main.FALSE |
| 3823 | if removeResults != main.TRUE: |
| 3824 | main.log.error( "Error executing set remove" ) |
| 3825 | |
| 3826 | # Check if set is still correct |
| 3827 | size = len( onosSet ) |
| 3828 | getResponses = [] |
| 3829 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3830 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3831 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3832 | name="setTestGet-" + str( i ), |
| 3833 | args=[ onosSetName ] ) |
| 3834 | threads.append( t ) |
| 3835 | t.start() |
| 3836 | for t in threads: |
| 3837 | t.join() |
| 3838 | getResponses.append( t.result ) |
| 3839 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3840 | for i in range( len( main.activeNodes ) ): |
| 3841 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3842 | if isinstance( getResponses[ i ], list): |
| 3843 | current = set( getResponses[ i ] ) |
| 3844 | if len( current ) == len( getResponses[ i ] ): |
| 3845 | # no repeats |
| 3846 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3847 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3848 | " has incorrect view" + |
| 3849 | " of set " + onosSetName + ":\n" + |
| 3850 | str( getResponses[ i ] ) ) |
| 3851 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 3852 | main.log.debug( "Actual: " + str( current ) ) |
| 3853 | getResults = main.FALSE |
| 3854 | else: |
| 3855 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3856 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3857 | " has repeat elements in" + |
| 3858 | " set " + onosSetName + ":\n" + |
| 3859 | str( getResponses[ i ] ) ) |
| 3860 | getResults = main.FALSE |
| 3861 | elif getResponses[ i ] == main.ERROR: |
| 3862 | getResults = main.FALSE |
| 3863 | sizeResponses = [] |
| 3864 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3865 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3866 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3867 | name="setTestSize-" + str( i ), |
| 3868 | args=[ onosSetName ] ) |
| 3869 | threads.append( t ) |
| 3870 | t.start() |
| 3871 | for t in threads: |
| 3872 | t.join() |
| 3873 | sizeResponses.append( t.result ) |
| 3874 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3875 | for i in range( len( main.activeNodes ) ): |
| 3876 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3877 | if size != sizeResponses[ i ]: |
| 3878 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3879 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3880 | " expected a size of " + str( size ) + |
| 3881 | " for set " + onosSetName + |
| 3882 | " but got " + str( sizeResponses[ i ] ) ) |
| 3883 | removeResults = removeResults and getResults and sizeResults |
| 3884 | utilities.assert_equals( expect=main.TRUE, |
| 3885 | actual=removeResults, |
| 3886 | onpass="Set remove correct", |
| 3887 | onfail="Set remove was incorrect" ) |
| 3888 | |
| 3889 | main.step( "Distributed Set removeAll()" ) |
| 3890 | onosSet.difference_update( addAllValue.split() ) |
| 3891 | removeAllResponses = [] |
| 3892 | threads = [] |
| 3893 | try: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3894 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3895 | t = main.Thread( target=main.CLIs[i].setTestRemove, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3896 | name="setTestRemoveAll-" + str( i ), |
| 3897 | args=[ onosSetName, addAllValue ] ) |
| 3898 | threads.append( t ) |
| 3899 | t.start() |
| 3900 | for t in threads: |
| 3901 | t.join() |
| 3902 | removeAllResponses.append( t.result ) |
| 3903 | except Exception, e: |
| 3904 | main.log.exception(e) |
| 3905 | |
| 3906 | # main.TRUE = successfully changed the set |
| 3907 | # main.FALSE = action resulted in no change in set |
| 3908 | # main.ERROR - Some error in executing the function |
| 3909 | removeAllResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3910 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3911 | if removeAllResponses[ i ] == main.TRUE: |
| 3912 | # All is well |
| 3913 | pass |
| 3914 | elif removeAllResponses[ i ] == main.FALSE: |
| 3915 | # not in set, probably fine |
| 3916 | pass |
| 3917 | elif removeAllResponses[ i ] == main.ERROR: |
| 3918 | # Error in execution |
| 3919 | removeAllResults = main.FALSE |
| 3920 | else: |
| 3921 | # unexpected result |
| 3922 | removeAllResults = main.FALSE |
| 3923 | if removeAllResults != main.TRUE: |
| 3924 | main.log.error( "Error executing set removeAll" ) |
| 3925 | |
| 3926 | # Check if set is still correct |
| 3927 | size = len( onosSet ) |
| 3928 | getResponses = [] |
| 3929 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3930 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3931 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3932 | name="setTestGet-" + str( i ), |
| 3933 | args=[ onosSetName ] ) |
| 3934 | threads.append( t ) |
| 3935 | t.start() |
| 3936 | for t in threads: |
| 3937 | t.join() |
| 3938 | getResponses.append( t.result ) |
| 3939 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3940 | for i in range( len( main.activeNodes ) ): |
| 3941 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3942 | if isinstance( getResponses[ i ], list): |
| 3943 | current = set( getResponses[ i ] ) |
| 3944 | if len( current ) == len( getResponses[ i ] ): |
| 3945 | # no repeats |
| 3946 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3947 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3948 | " has incorrect view" + |
| 3949 | " of set " + onosSetName + ":\n" + |
| 3950 | str( getResponses[ i ] ) ) |
| 3951 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 3952 | main.log.debug( "Actual: " + str( current ) ) |
| 3953 | getResults = main.FALSE |
| 3954 | else: |
| 3955 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3956 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3957 | " has repeat elements in" + |
| 3958 | " set " + onosSetName + ":\n" + |
| 3959 | str( getResponses[ i ] ) ) |
| 3960 | getResults = main.FALSE |
| 3961 | elif getResponses[ i ] == main.ERROR: |
| 3962 | getResults = main.FALSE |
| 3963 | sizeResponses = [] |
| 3964 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3965 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3966 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3967 | name="setTestSize-" + str( i ), |
| 3968 | args=[ onosSetName ] ) |
| 3969 | threads.append( t ) |
| 3970 | t.start() |
| 3971 | for t in threads: |
| 3972 | t.join() |
| 3973 | sizeResponses.append( t.result ) |
| 3974 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3975 | for i in range( len( main.activeNodes ) ): |
| 3976 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3977 | if size != sizeResponses[ i ]: |
| 3978 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3979 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3980 | " expected a size of " + str( size ) + |
| 3981 | " for set " + onosSetName + |
| 3982 | " but got " + str( sizeResponses[ i ] ) ) |
| 3983 | removeAllResults = removeAllResults and getResults and sizeResults |
| 3984 | utilities.assert_equals( expect=main.TRUE, |
| 3985 | actual=removeAllResults, |
| 3986 | onpass="Set removeAll correct", |
| 3987 | onfail="Set removeAll was incorrect" ) |
| 3988 | |
| 3989 | main.step( "Distributed Set addAll()" ) |
| 3990 | onosSet.update( addAllValue.split() ) |
| 3991 | addResponses = [] |
| 3992 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 3993 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 3994 | t = main.Thread( target=main.CLIs[i].setTestAdd, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 3995 | name="setTestAddAll-" + str( i ), |
| 3996 | args=[ onosSetName, addAllValue ] ) |
| 3997 | threads.append( t ) |
| 3998 | t.start() |
| 3999 | for t in threads: |
| 4000 | t.join() |
| 4001 | addResponses.append( t.result ) |
| 4002 | |
| 4003 | # main.TRUE = successfully changed the set |
| 4004 | # main.FALSE = action resulted in no change in set |
| 4005 | # main.ERROR - Some error in executing the function |
| 4006 | addAllResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4007 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4008 | if addResponses[ i ] == main.TRUE: |
| 4009 | # All is well |
| 4010 | pass |
| 4011 | elif addResponses[ i ] == main.FALSE: |
| 4012 | # Already in set, probably fine |
| 4013 | pass |
| 4014 | elif addResponses[ i ] == main.ERROR: |
| 4015 | # Error in execution |
| 4016 | addAllResults = main.FALSE |
| 4017 | else: |
| 4018 | # unexpected result |
| 4019 | addAllResults = main.FALSE |
| 4020 | if addAllResults != main.TRUE: |
| 4021 | main.log.error( "Error executing set addAll" ) |
| 4022 | |
| 4023 | # Check if set is still correct |
| 4024 | size = len( onosSet ) |
| 4025 | getResponses = [] |
| 4026 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4027 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4028 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4029 | name="setTestGet-" + str( i ), |
| 4030 | args=[ onosSetName ] ) |
| 4031 | threads.append( t ) |
| 4032 | t.start() |
| 4033 | for t in threads: |
| 4034 | t.join() |
| 4035 | getResponses.append( t.result ) |
| 4036 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4037 | for i in range( len( main.activeNodes ) ): |
| 4038 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4039 | if isinstance( getResponses[ i ], list): |
| 4040 | current = set( getResponses[ i ] ) |
| 4041 | if len( current ) == len( getResponses[ i ] ): |
| 4042 | # no repeats |
| 4043 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4044 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4045 | " has incorrect view" + |
| 4046 | " of set " + onosSetName + ":\n" + |
| 4047 | str( getResponses[ i ] ) ) |
| 4048 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 4049 | main.log.debug( "Actual: " + str( current ) ) |
| 4050 | getResults = main.FALSE |
| 4051 | else: |
| 4052 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4053 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4054 | " has repeat elements in" + |
| 4055 | " set " + onosSetName + ":\n" + |
| 4056 | str( getResponses[ i ] ) ) |
| 4057 | getResults = main.FALSE |
| 4058 | elif getResponses[ i ] == main.ERROR: |
| 4059 | getResults = main.FALSE |
| 4060 | sizeResponses = [] |
| 4061 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4062 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4063 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4064 | name="setTestSize-" + str( i ), |
| 4065 | args=[ onosSetName ] ) |
| 4066 | threads.append( t ) |
| 4067 | t.start() |
| 4068 | for t in threads: |
| 4069 | t.join() |
| 4070 | sizeResponses.append( t.result ) |
| 4071 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4072 | for i in range( len( main.activeNodes ) ): |
| 4073 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4074 | if size != sizeResponses[ i ]: |
| 4075 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4076 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4077 | " expected a size of " + str( size ) + |
| 4078 | " for set " + onosSetName + |
| 4079 | " but got " + str( sizeResponses[ i ] ) ) |
| 4080 | addAllResults = addAllResults and getResults and sizeResults |
| 4081 | utilities.assert_equals( expect=main.TRUE, |
| 4082 | actual=addAllResults, |
| 4083 | onpass="Set addAll correct", |
| 4084 | onfail="Set addAll was incorrect" ) |
| 4085 | |
| 4086 | main.step( "Distributed Set clear()" ) |
| 4087 | onosSet.clear() |
| 4088 | clearResponses = [] |
| 4089 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4090 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4091 | t = main.Thread( target=main.CLIs[i].setTestRemove, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4092 | name="setTestClear-" + str( i ), |
| 4093 | args=[ onosSetName, " "], # Values doesn't matter |
| 4094 | kwargs={ "clear": True } ) |
| 4095 | threads.append( t ) |
| 4096 | t.start() |
| 4097 | for t in threads: |
| 4098 | t.join() |
| 4099 | clearResponses.append( t.result ) |
| 4100 | |
| 4101 | # main.TRUE = successfully changed the set |
| 4102 | # main.FALSE = action resulted in no change in set |
| 4103 | # main.ERROR - Some error in executing the function |
| 4104 | clearResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4105 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4106 | if clearResponses[ i ] == main.TRUE: |
| 4107 | # All is well |
| 4108 | pass |
| 4109 | elif clearResponses[ i ] == main.FALSE: |
| 4110 | # Nothing set, probably fine |
| 4111 | pass |
| 4112 | elif clearResponses[ i ] == main.ERROR: |
| 4113 | # Error in execution |
| 4114 | clearResults = main.FALSE |
| 4115 | else: |
| 4116 | # unexpected result |
| 4117 | clearResults = main.FALSE |
| 4118 | if clearResults != main.TRUE: |
| 4119 | main.log.error( "Error executing set clear" ) |
| 4120 | |
| 4121 | # Check if set is still correct |
| 4122 | size = len( onosSet ) |
| 4123 | getResponses = [] |
| 4124 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4125 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4126 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4127 | name="setTestGet-" + str( i ), |
| 4128 | args=[ onosSetName ] ) |
| 4129 | threads.append( t ) |
| 4130 | t.start() |
| 4131 | for t in threads: |
| 4132 | t.join() |
| 4133 | getResponses.append( t.result ) |
| 4134 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4135 | for i in range( len( main.activeNodes ) ): |
| 4136 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4137 | if isinstance( getResponses[ i ], list): |
| 4138 | current = set( getResponses[ i ] ) |
| 4139 | if len( current ) == len( getResponses[ i ] ): |
| 4140 | # no repeats |
| 4141 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4142 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4143 | " has incorrect view" + |
| 4144 | " of set " + onosSetName + ":\n" + |
| 4145 | str( getResponses[ i ] ) ) |
| 4146 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 4147 | main.log.debug( "Actual: " + str( current ) ) |
| 4148 | getResults = main.FALSE |
| 4149 | else: |
| 4150 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4151 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4152 | " has repeat elements in" + |
| 4153 | " set " + onosSetName + ":\n" + |
| 4154 | str( getResponses[ i ] ) ) |
| 4155 | getResults = main.FALSE |
| 4156 | elif getResponses[ i ] == main.ERROR: |
| 4157 | getResults = main.FALSE |
| 4158 | sizeResponses = [] |
| 4159 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4160 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4161 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4162 | name="setTestSize-" + str( i ), |
| 4163 | args=[ onosSetName ] ) |
| 4164 | threads.append( t ) |
| 4165 | t.start() |
| 4166 | for t in threads: |
| 4167 | t.join() |
| 4168 | sizeResponses.append( t.result ) |
| 4169 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4170 | for i in range( len( main.activeNodes ) ): |
| 4171 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4172 | if size != sizeResponses[ i ]: |
| 4173 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4174 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4175 | " expected a size of " + str( size ) + |
| 4176 | " for set " + onosSetName + |
| 4177 | " but got " + str( sizeResponses[ i ] ) ) |
| 4178 | clearResults = clearResults and getResults and sizeResults |
| 4179 | utilities.assert_equals( expect=main.TRUE, |
| 4180 | actual=clearResults, |
| 4181 | onpass="Set clear correct", |
| 4182 | onfail="Set clear was incorrect" ) |
| 4183 | |
| 4184 | main.step( "Distributed Set addAll()" ) |
| 4185 | onosSet.update( addAllValue.split() ) |
| 4186 | addResponses = [] |
| 4187 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4188 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4189 | t = main.Thread( target=main.CLIs[i].setTestAdd, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4190 | name="setTestAddAll-" + str( i ), |
| 4191 | args=[ onosSetName, addAllValue ] ) |
| 4192 | threads.append( t ) |
| 4193 | t.start() |
| 4194 | for t in threads: |
| 4195 | t.join() |
| 4196 | addResponses.append( t.result ) |
| 4197 | |
| 4198 | # main.TRUE = successfully changed the set |
| 4199 | # main.FALSE = action resulted in no change in set |
| 4200 | # main.ERROR - Some error in executing the function |
| 4201 | addAllResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4202 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4203 | if addResponses[ i ] == main.TRUE: |
| 4204 | # All is well |
| 4205 | pass |
| 4206 | elif addResponses[ i ] == main.FALSE: |
| 4207 | # Already in set, probably fine |
| 4208 | pass |
| 4209 | elif addResponses[ i ] == main.ERROR: |
| 4210 | # Error in execution |
| 4211 | addAllResults = main.FALSE |
| 4212 | else: |
| 4213 | # unexpected result |
| 4214 | addAllResults = main.FALSE |
| 4215 | if addAllResults != main.TRUE: |
| 4216 | main.log.error( "Error executing set addAll" ) |
| 4217 | |
| 4218 | # Check if set is still correct |
| 4219 | size = len( onosSet ) |
| 4220 | getResponses = [] |
| 4221 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4222 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4223 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4224 | name="setTestGet-" + str( i ), |
| 4225 | args=[ onosSetName ] ) |
| 4226 | threads.append( t ) |
| 4227 | t.start() |
| 4228 | for t in threads: |
| 4229 | t.join() |
| 4230 | getResponses.append( t.result ) |
| 4231 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4232 | for i in range( len( main.activeNodes ) ): |
| 4233 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4234 | if isinstance( getResponses[ i ], list): |
| 4235 | current = set( getResponses[ i ] ) |
| 4236 | if len( current ) == len( getResponses[ i ] ): |
| 4237 | # no repeats |
| 4238 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4239 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4240 | " has incorrect view" + |
| 4241 | " of set " + onosSetName + ":\n" + |
| 4242 | str( getResponses[ i ] ) ) |
| 4243 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 4244 | main.log.debug( "Actual: " + str( current ) ) |
| 4245 | getResults = main.FALSE |
| 4246 | else: |
| 4247 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4248 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4249 | " has repeat elements in" + |
| 4250 | " set " + onosSetName + ":\n" + |
| 4251 | str( getResponses[ i ] ) ) |
| 4252 | getResults = main.FALSE |
| 4253 | elif getResponses[ i ] == main.ERROR: |
| 4254 | getResults = main.FALSE |
| 4255 | sizeResponses = [] |
| 4256 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4257 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4258 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4259 | name="setTestSize-" + str( i ), |
| 4260 | args=[ onosSetName ] ) |
| 4261 | threads.append( t ) |
| 4262 | t.start() |
| 4263 | for t in threads: |
| 4264 | t.join() |
| 4265 | sizeResponses.append( t.result ) |
| 4266 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4267 | for i in range( len( main.activeNodes ) ): |
| 4268 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4269 | if size != sizeResponses[ i ]: |
| 4270 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4271 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4272 | " expected a size of " + str( size ) + |
| 4273 | " for set " + onosSetName + |
| 4274 | " but got " + str( sizeResponses[ i ] ) ) |
| 4275 | addAllResults = addAllResults and getResults and sizeResults |
| 4276 | utilities.assert_equals( expect=main.TRUE, |
| 4277 | actual=addAllResults, |
| 4278 | onpass="Set addAll correct", |
| 4279 | onfail="Set addAll was incorrect" ) |
| 4280 | |
| 4281 | main.step( "Distributed Set retain()" ) |
| 4282 | onosSet.intersection_update( retainValue.split() ) |
| 4283 | retainResponses = [] |
| 4284 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4285 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4286 | t = main.Thread( target=main.CLIs[i].setTestRemove, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4287 | name="setTestRetain-" + str( i ), |
| 4288 | args=[ onosSetName, retainValue ], |
| 4289 | kwargs={ "retain": True } ) |
| 4290 | threads.append( t ) |
| 4291 | t.start() |
| 4292 | for t in threads: |
| 4293 | t.join() |
| 4294 | retainResponses.append( t.result ) |
| 4295 | |
| 4296 | # main.TRUE = successfully changed the set |
| 4297 | # main.FALSE = action resulted in no change in set |
| 4298 | # main.ERROR - Some error in executing the function |
| 4299 | retainResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4300 | for i in range( len( main.activeNodes ) ): |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4301 | if retainResponses[ i ] == main.TRUE: |
| 4302 | # All is well |
| 4303 | pass |
| 4304 | elif retainResponses[ i ] == main.FALSE: |
| 4305 | # Already in set, probably fine |
| 4306 | pass |
| 4307 | elif retainResponses[ i ] == main.ERROR: |
| 4308 | # Error in execution |
| 4309 | retainResults = main.FALSE |
| 4310 | else: |
| 4311 | # unexpected result |
| 4312 | retainResults = main.FALSE |
| 4313 | if retainResults != main.TRUE: |
| 4314 | main.log.error( "Error executing set retain" ) |
| 4315 | |
| 4316 | # Check if set is still correct |
| 4317 | size = len( onosSet ) |
| 4318 | getResponses = [] |
| 4319 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4320 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4321 | t = main.Thread( target=main.CLIs[i].setTestGet, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4322 | name="setTestGet-" + str( i ), |
| 4323 | args=[ onosSetName ] ) |
| 4324 | threads.append( t ) |
| 4325 | t.start() |
| 4326 | for t in threads: |
| 4327 | t.join() |
| 4328 | getResponses.append( t.result ) |
| 4329 | getResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4330 | for i in range( len( main.activeNodes ) ): |
| 4331 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4332 | if isinstance( getResponses[ i ], list): |
| 4333 | current = set( getResponses[ i ] ) |
| 4334 | if len( current ) == len( getResponses[ i ] ): |
| 4335 | # no repeats |
| 4336 | if onosSet != current: |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4337 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4338 | " has incorrect view" + |
| 4339 | " of set " + onosSetName + ":\n" + |
| 4340 | str( getResponses[ i ] ) ) |
| 4341 | main.log.debug( "Expected: " + str( onosSet ) ) |
| 4342 | main.log.debug( "Actual: " + str( current ) ) |
| 4343 | getResults = main.FALSE |
| 4344 | else: |
| 4345 | # error, set is not a set |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4346 | main.log.error( "ONOS" + node + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4347 | " has repeat elements in" + |
| 4348 | " set " + onosSetName + ":\n" + |
| 4349 | str( getResponses[ i ] ) ) |
| 4350 | getResults = main.FALSE |
| 4351 | elif getResponses[ i ] == main.ERROR: |
| 4352 | getResults = main.FALSE |
| 4353 | sizeResponses = [] |
| 4354 | threads = [] |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4355 | for i in main.activeNodes: |
Jon Hall | e1a3b75 | 2015-07-22 13:02:46 -0700 | [diff] [blame] | 4356 | t = main.Thread( target=main.CLIs[i].setTestSize, |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4357 | name="setTestSize-" + str( i ), |
| 4358 | args=[ onosSetName ] ) |
| 4359 | threads.append( t ) |
| 4360 | t.start() |
| 4361 | for t in threads: |
| 4362 | t.join() |
| 4363 | sizeResponses.append( t.result ) |
| 4364 | sizeResults = main.TRUE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4365 | for i in range( len( main.activeNodes ) ): |
| 4366 | node = str( main.activeNodes[i] + 1 ) |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4367 | if size != sizeResponses[ i ]: |
| 4368 | sizeResults = main.FALSE |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4369 | main.log.error( "ONOS" + node + " expected a size of " + |
Jon Hall | 5cf14d5 | 2015-07-16 12:15:19 -0700 | [diff] [blame] | 4370 | str( size ) + " for set " + onosSetName + |
| 4371 | " but got " + str( sizeResponses[ i ] ) ) |
| 4372 | retainResults = retainResults and getResults and sizeResults |
| 4373 | utilities.assert_equals( expect=main.TRUE, |
| 4374 | actual=retainResults, |
| 4375 | onpass="Set retain correct", |
| 4376 | onfail="Set retain was incorrect" ) |
| 4377 | |
Jon Hall | 2a5002c | 2015-08-21 16:49:11 -0700 | [diff] [blame] | 4378 | # Transactional maps |
| 4379 | main.step( "Partitioned Transactional maps put" ) |
| 4380 | tMapValue = "Testing" |
| 4381 | numKeys = 100 |
| 4382 | putResult = True |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4383 | node = main.activeNodes[0] |
| 4384 | putResponses = main.CLIs[node].transactionalMapPut( numKeys, tMapValue ) |
Jon Hall | 2a5002c | 2015-08-21 16:49:11 -0700 | [diff] [blame] | 4385 | if len( putResponses ) == 100: |
| 4386 | for i in putResponses: |
| 4387 | if putResponses[ i ][ 'value' ] != tMapValue: |
| 4388 | putResult = False |
| 4389 | else: |
| 4390 | putResult = False |
| 4391 | if not putResult: |
| 4392 | main.log.debug( "Put response values: " + str( putResponses ) ) |
| 4393 | utilities.assert_equals( expect=True, |
| 4394 | actual=putResult, |
| 4395 | onpass="Partitioned Transactional Map put successful", |
| 4396 | onfail="Partitioned Transactional Map put values are incorrect" ) |
| 4397 | |
| 4398 | main.step( "Partitioned Transactional maps get" ) |
| 4399 | getCheck = True |
| 4400 | for n in range( 1, numKeys + 1 ): |
| 4401 | getResponses = [] |
| 4402 | threads = [] |
| 4403 | valueCheck = True |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4404 | for i in main.activeNodes: |
Jon Hall | 2a5002c | 2015-08-21 16:49:11 -0700 | [diff] [blame] | 4405 | t = main.Thread( target=main.CLIs[i].transactionalMapGet, |
| 4406 | name="TMap-get-" + str( i ), |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4407 | args=[ "Key" + str( n ) ] ) |
Jon Hall | 2a5002c | 2015-08-21 16:49:11 -0700 | [diff] [blame] | 4408 | threads.append( t ) |
| 4409 | t.start() |
| 4410 | for t in threads: |
| 4411 | t.join() |
| 4412 | getResponses.append( t.result ) |
| 4413 | for node in getResponses: |
| 4414 | if node != tMapValue: |
| 4415 | valueCheck = False |
| 4416 | if not valueCheck: |
| 4417 | main.log.warn( "Values for key 'Key" + str( n ) + "' do not match:" ) |
| 4418 | main.log.warn( getResponses ) |
| 4419 | getCheck = getCheck and valueCheck |
| 4420 | utilities.assert_equals( expect=True, |
| 4421 | actual=getCheck, |
| 4422 | onpass="Partitioned Transactional Map get values were correct", |
| 4423 | onfail="Partitioned Transactional Map values incorrect" ) |
| 4424 | |
| 4425 | main.step( "In-memory Transactional maps put" ) |
| 4426 | tMapValue = "Testing" |
| 4427 | numKeys = 100 |
| 4428 | putResult = True |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4429 | node = main.activeNodes[0] |
| 4430 | putResponses = main.CLIs[node].transactionalMapPut( numKeys, tMapValue, inMemory=True ) |
Jon Hall | 2a5002c | 2015-08-21 16:49:11 -0700 | [diff] [blame] | 4431 | if len( putResponses ) == 100: |
| 4432 | for i in putResponses: |
| 4433 | if putResponses[ i ][ 'value' ] != tMapValue: |
| 4434 | putResult = False |
| 4435 | else: |
| 4436 | putResult = False |
| 4437 | if not putResult: |
| 4438 | main.log.debug( "Put response values: " + str( putResponses ) ) |
| 4439 | utilities.assert_equals( expect=True, |
| 4440 | actual=putResult, |
| 4441 | onpass="In-Memory Transactional Map put successful", |
| 4442 | onfail="In-Memory Transactional Map put values are incorrect" ) |
| 4443 | |
| 4444 | main.step( "In-Memory Transactional maps get" ) |
| 4445 | getCheck = True |
| 4446 | for n in range( 1, numKeys + 1 ): |
| 4447 | getResponses = [] |
| 4448 | threads = [] |
| 4449 | valueCheck = True |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4450 | for i in main.activeNodes: |
Jon Hall | 2a5002c | 2015-08-21 16:49:11 -0700 | [diff] [blame] | 4451 | t = main.Thread( target=main.CLIs[i].transactionalMapGet, |
| 4452 | name="TMap-get-" + str( i ), |
Jon Hall | b3ed8ed | 2015-10-28 16:43:55 -0700 | [diff] [blame] | 4453 | args=[ "Key" + str( n ) ], |
Jon Hall | 2a5002c | 2015-08-21 16:49:11 -0700 | [diff] [blame] | 4454 | kwargs={ "inMemory": True } ) |
| 4455 | threads.append( t ) |
| 4456 | t.start() |
| 4457 | for t in threads: |
| 4458 | t.join() |
| 4459 | getResponses.append( t.result ) |
| 4460 | for node in getResponses: |
| 4461 | if node != tMapValue: |
| 4462 | valueCheck = False |
| 4463 | if not valueCheck: |
| 4464 | main.log.warn( "Values for key 'Key" + str( n ) + "' do not match:" ) |
| 4465 | main.log.warn( getResponses ) |
| 4466 | getCheck = getCheck and valueCheck |
| 4467 | utilities.assert_equals( expect=True, |
| 4468 | actual=getCheck, |
| 4469 | onpass="In-Memory Transactional Map get values were correct", |
| 4470 | onfail="In-Memory Transactional Map values incorrect" ) |