| # Controller |
| #----------------------- |
| #CTRL1_IP="127.0.0.1" |
| #CTRL1_PORT="6653" |
| #CTRL2_IP="127.0.0.1" |
| #CTRL2_PORT="6653" |
| #CTRL3_IP="127.0.0.1" |
| #CTRL3_PORT="6653" |
| |
| #LISTEN_IP="0.0.0.0" |
| #LISTEN_PORT="6653" |
| |
| # Datapath ID |
| #----------------------- |
| #DPID=`cat /sys/class/net/ma1/address | sed 's/://g'` |
| #DPID="1" |
| |
| # In-band management |
| #----------------------- |
| #IB_MGMT_VLAN="1" |
| #IB_MGMT_PORT_ARG="-p 5" |
| |
| # Debug options |
| #----------------------- |
| #OPT_ARGS="-a2 -d4 -c1 -c2 -c3 -c4 -c5" |
| |
| # Maximu number of log files (valid: 0-10; 0:disble logging) |
| MAX_LOG_NUM=0 |
| |
| #---------------------------------------------------------------------------- |
| # OPT_ARGS: |
| #---------------------------------------------------------------------------- |
| # |
| # Controllers: |
| # -i, --dpid=DATAPATHID The Datapath ID for this switch. |
| # -l, --listen=IP[:PORT] A local IP address on which to listen for |
| # controllers (may use this option multiple times) |
| # -t, --controller=IP[:PORT] A Controller IP address (may use this option |
| # multiple times) |
| # |
| # TLS: |
| # --cacert=CACERTIFICATE The Certificate Authority certficate |
| # --cert=CERTIFICATE The SSL public certificate file for the switch |
| # --cipher=CIPHER The list of ciphers to use |
| # --key=KEYFILE The SSL private key file for the switch |
| # |
| # Management VLAN: |
| # -p, --port=MGMTPORT A port in the mgmt VLAN (may use this option |
| # multiple times) |
| # -v, --vlan=MGMTVLAN The VLAN to be reserved for management. |
| # |
| # Debugging: |
| # -a, --agentdebuglvl=AGENTDEBUGLVL |
| # The verbosity of OF Agent debug messages. |
| # -c, --ofdpadebugcomp=OFPDACOMPONENT |
| # The OF-DPA component for which debug messages are |
| # enabled. |
| # -d, --ofdpadebuglvl=OFDPADEBUGLVL |
| # The verbosity of OF-DPA debug messages. |
| # |
| # |
| # Note: |
| # IPv6 address parameters are specified following RFC3986. |
| # To include a port number, enclose the IPv6 address in square brackets: |
| # Example: -t [2001:db8:1f70::999:de8:7648:6e8]:6653 |
| # |
| # To use TLS when connecting to a controller, prefix the IP address with "tls:". |
| # Example: -t tls:[2001:db8:1f70::999:de8:7648:6e8]:6653 |
| # |
| # Note: it is necessary to have a private key and public certificate to use TLS. |
| # If the CA certificate is not provided, then the switch does not validate |
| # certificates. This can be helpful if self-signed certificates are being used. |
| # |
| # Default values: |
| # No controllers connections |
| # Note: may listen on mutiple IP addresses. E.g., IPv4 and IPv6. |
| # OFAGENTDEBUGLVL = 0 |
| # Valid OF Agent debug levels are 0 - 2. |
| # OFDPADEBUGLVL = 0 |
| # Valid OF-DPA debug levels are 0 - 4. |
| # No components enabled for debug: |
| # Valid OF-DPA components are: |
| # 1 = API |
| # 2 = Mapping |
| # 3 = RPC |
| # 4 = OFDB |
| # 5 = Datapath |
| # 6 = G8131 |
| # 7 = Y1731 |
| # 8 = sFlow |
| # 9 = SDK |
| # DATAPATHID = 0xda7a |
| # No defaults for the management VLAN and port(s). The management VLAN feature |
| # is disabled by default. |
| # CIPHER = HIGH |
| # CACERTIFICATE = |
| # KEYFILE = /etc/ssl/private/switch.key |
| # CERTIFICATE = /etc/ssl/certs/switch.crt |
| #---------------------------------------------------------------------------- |