| """ |
| Copyright 2016 Open Networking Foundation ( ONF ) |
| |
| Please refer questions to either the onos test mailing list at <onos-test@onosproject.org>, |
| the System Testing Plans and Results wiki page at <https://wiki.onosproject.org/x/voMg>, |
| or the System Testing Guide page at <https://wiki.onosproject.org/x/WYQg> |
| |
| TestON is free software: you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation, either version 2 of the License, or |
| ( at your option ) any later version. |
| |
| TestON is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with TestON. If not, see <http://www.gnu.org/licenses/>. |
| """ |
| """ |
| Description: This test is to determine if ONOS can handle |
| a full network partion |
| |
| List of test cases: |
| CASE1: Compile ONOS and push it to the test machines |
| CASE2: Assign devices to controllers |
| CASE21: Assign mastership to controllers |
| CASE3: Assign intents |
| CASE4: Ping across added host intents |
| CASE5: Reading state of ONOS |
| CASE61: The Failure inducing case. |
| CASE62: The Failure recovery case. |
| CASE7: Check state after control plane failure |
| CASE8: Compare topo |
| CASE9: Link s3-s28 down |
| CASE10: Link s3-s28 up |
| CASE11: Switch down |
| CASE12: Switch up |
| CASE13: Clean up |
| CASE14: start election app on all onos nodes |
| CASE15: Check that Leadership Election is still functional |
| CASE16: Install Distributed Primitives app |
| CASE17: Check for basic functionality with distributed primitives |
| """ |
| class HAfullNetPartition: |
| |
| def __init__( self ): |
| self.default = '' |
| |
| def CASE1( self, main ): |
| """ |
| CASE1 is to compile ONOS and push it to the test machines |
| |
| Startup sequence: |
| cell <name> |
| onos-verify-cell |
| NOTE: temporary - onos-remove-raft-logs |
| onos-uninstall |
| start mininet |
| git pull |
| mvn clean install |
| onos-package |
| onos-install -f |
| onos-wait-for-start |
| start cli sessions |
| start tcpdump |
| """ |
| main.log.info( "ONOS HA test: Partition ONOS nodes into two sub-clusters - " + |
| "initialization" ) |
| # set global variables |
| # These are for csv plotting in jenkins |
| main.HAlabels = [] |
| main.HAdata = [] |
| try: |
| from tests.dependencies.ONOSSetup import ONOSSetup |
| main.testSetUp = ONOSSetup() |
| except ImportError: |
| main.log.error( "ONOSSetup not found. exiting the test" ) |
| main.cleanAndExit() |
| main.testSetUp.envSetupDescription() |
| try: |
| from tests.HA.dependencies.HA import HA |
| main.HA = HA() |
| # load some variables from the params file |
| cellName = main.params[ 'ENV' ][ 'cellName' ] |
| main.apps = main.params[ 'ENV' ][ 'appString' ] |
| stepResult = main.testSetUp.envSetup( includeCaseDesc=False ) |
| except Exception as e: |
| main.testSetUp.envSetupException( e ) |
| main.testSetUp.evnSetupConclusion( stepResult ) |
| |
| applyFuncs = [ main.HA.customizeOnosGenPartitions ] |
| applyArgs = [ None ] |
| try: |
| if main.params[ 'topology' ][ 'topoFile' ]: |
| main.log.info( 'Skipping start of Mininet in this case, make sure you start it elsewhere' ) |
| else: |
| applyFuncs.append( main.HA.startingMininet ) |
| applyArgs.append( None ) |
| except (KeyError, IndexError): |
| applyFuncs.append( main.HA.startingMininet ) |
| applyArgs.append( None ) |
| |
| main.testSetUp.ONOSSetUp( main.Cluster, cellName=cellName, removeLog=True, |
| extraApply=applyFuncs, |
| applyArgs=applyArgs, |
| extraClean=main.HA.cleanUpGenPartition, |
| includeCaseDesc=False ) |
| main.HA.initialSetUp() |
| |
| main.step( 'Set logging levels' ) |
| logging = True |
| try: |
| logs = main.params.get( 'ONOS_Logging', False ) |
| if logs: |
| for namespace, level in logs.items(): |
| for ctrl in main.Cluster.active(): |
| ctrl.CLI.logSet( level, namespace ) |
| except AttributeError: |
| logging = False |
| utilities.assert_equals( expect=True, actual=logging, |
| onpass="Set log levels", |
| onfail="Failed to set log levels" ) |
| |
| def CASE2( self, main ): |
| """ |
| Assign devices to controllers |
| """ |
| main.HA.assignDevices( main ) |
| |
| def CASE102( self, main ): |
| """ |
| Set up Spine-Leaf fabric topology in Mininet |
| """ |
| main.HA.startTopology( main ) |
| |
| def CASE21( self, main ): |
| """ |
| Assign mastership to controllers |
| """ |
| main.HA.assignMastership( main ) |
| |
| def CASE3( self, main ): |
| """ |
| Assign intents |
| """ |
| main.HA.assignIntents( main ) |
| |
| def CASE4( self, main ): |
| """ |
| Ping across added host intents |
| """ |
| main.HA.pingAcrossHostIntent( main ) |
| |
| def CASE104( self, main ): |
| """ |
| Ping Hosts |
| """ |
| main.case( "Check connectivity" ) |
| main.step( "Ping between all hosts" ) |
| pingResult = main.Mininet1.pingall() |
| utilities.assert_equals( expect=main.TRUE, actual=pingResult, |
| onpass="All Pings Passed", |
| onfail="Failed to ping between all hosts" ) |
| |
| def CASE5( self, main ): |
| """ |
| Reading state of ONOS |
| """ |
| main.HA.readingState( main ) |
| |
| def CASE61( self, main ): |
| """ |
| The Failure case. |
| """ |
| import pexpect |
| import time |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| main.case( "Partition ONOS nodes into two distinct partitions" ) |
| |
| main.step( "Checking ONOS Logs for errors" ) |
| for ctrl in main.Cluster.runningNodes: |
| main.log.debug( "Checking logs for errors on " + ctrl.name + ":" ) |
| main.log.warn( main.ONOSbench.checkLogs( ctrl.ipAddress ) ) |
| |
| main.log.debug( main.Cluster.next().CLI.roles( jsonFormat=False ) ) |
| |
| n = len( main.Cluster.runningNodes ) # Number of nodes |
| p = ( ( n + 1 ) / 2 ) + 1 # Number of partitions |
| main.partition = [ 0 ] # ONOS node to partition, listed by index in main.nodes |
| if n > 3: |
| main.partition.append( p - 1 ) |
| # NOTE: This only works for cluster sizes of 3,5, or 7. |
| |
| main.step( "Partitioning ONOS nodes" ) |
| nodeList = [ str( i + 1 ) for i in main.partition ] |
| main.log.info( "Nodes to be partitioned: " + str( nodeList ) ) |
| partitionResults = main.TRUE |
| for i in range( 0, n ): |
| iCtrl = main.Cluster.runningNodes[ i ] |
| this = iCtrl.Bench.sshToNode( iCtrl.ipAddress ) |
| if i not in main.partition: |
| for j in main.partition: |
| foe = main.Cluster.runningNodes[ j ] |
| main.log.warn( "Setting IP Tables rule from {} to {}. ".format( iCtrl.ipAddress, |
| foe.ipAddress ) ) |
| # CMD HERE |
| try: |
| cmdStr = "sudo iptables -A {} -d {} -s {} -j DROP".format( "INPUT", |
| iCtrl.ipAddress, |
| foe.ipAddress ) |
| this.sendline( cmdStr ) |
| this.expect( "\$" ) |
| main.log.debug( this.before ) |
| except pexpect.EOF: |
| main.log.error( iCtrl.name + ": EOF exception found" ) |
| main.log.error( iCtrl.name + ": " + this.before ) |
| main.cleanAndExit() |
| except Exception: |
| main.log.exception( iCtrl.name + ": Uncaught exception!" ) |
| main.cleanAndExit() |
| else: |
| for j in range( 0, n ): |
| if j not in main.partition: |
| foe = main.Cluster.runningNodes[ j ] |
| main.log.warn( "Setting IP Tables rule from {} to {}. ".format( iCtrl.ipAddress, |
| foe.ipAddress ) ) |
| # CMD HERE |
| cmdStr = "sudo iptables -A {} -d {} -s {} -j DROP".format( "INPUT", |
| iCtrl.ipAddress, |
| foe.ipAddress ) |
| try: |
| this.sendline( cmdStr ) |
| this.expect( "\$" ) |
| main.log.debug( this.before ) |
| except pexpect.EOF: |
| main.log.error( iCtrl.name + ": EOF exception found" ) |
| main.log.error( iCtrl.name + ": " + this.before ) |
| main.cleanAndExit() |
| except Exception: |
| main.log.exception( iCtrl.name + ": Uncaught exception!" ) |
| main.cleanAndExit() |
| main.Cluster.runningNodes[ i ].active = False |
| iCtrl.Bench.exitFromSsh( this, iCtrl.ipAddress ) |
| # NOTE: When dynamic clustering is finished, we need to start checking |
| # main.partion nodes still work when partitioned |
| utilities.assert_equals( expect=main.TRUE, actual=partitionResults, |
| onpass="Firewall rules set successfully", |
| onfail="Error setting firewall rules" ) |
| main.Cluster.reset() |
| |
| main.step( "Sleeping 60 seconds" ) |
| time.sleep( 60 ) |
| |
| def CASE62( self, main ): |
| """ |
| Healing Partition |
| """ |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.partition, "main.partition not defined" |
| main.case( "Healing Partition" ) |
| |
| main.step( "Deleteing firewall rules" ) |
| healResults = main.TRUE |
| for ctrl in main.Cluster.runningNodes: |
| cmdStr = "sudo iptables -F" |
| handle = ctrl.Bench.sshToNode( ctrl.ipAddress ) |
| handle.sendline( cmdStr ) |
| handle.expect( "\$" ) |
| main.log.debug( handle.before ) |
| ctrl.Bench.exitFromSsh( handle, ctrl.ipAddress ) |
| utilities.assert_equals( expect=main.TRUE, actual=healResults, |
| onpass="Firewall rules removed", |
| onfail="Error removing firewall rules" ) |
| |
| for node in main.partition: |
| main.Cluster.runningNodes[ node ].active = True |
| main.Cluster.reset() |
| |
| main.step( "Checking ONOS nodes" ) |
| nodeResults = utilities.retry( main.Cluster.nodesCheck, |
| False, |
| sleep=15, |
| attempts=50 ) |
| |
| utilities.assert_equals( expect=True, actual=nodeResults, |
| onpass="Nodes check successful", |
| onfail="Nodes check NOT successful" ) |
| |
| if not nodeResults: |
| for ctrl in main.Cluster.active(): |
| main.log.debug( "{} components not ACTIVE: \n{}".format( |
| ctrl.name, |
| ctrl.CLI.sendline( "scr:list | grep -v ACTIVE" ) ) ) |
| main.log.error( "Failed to start ONOS, stopping test" ) |
| main.cleanAndExit() |
| |
| def CASE7( self, main ): |
| """ |
| Check state after ONOS failure |
| """ |
| main.HA.checkStateAfterEvent( main, afterWhich=0 ) |
| |
| main.step( "Leadership Election is still functional" ) |
| # Test of LeadershipElection |
| leaderList = [] |
| |
| partitioned = [] |
| for i in main.partition: |
| partitioned.append( main.Cluster.runningNodes[ i ].ipAddress ) |
| leaderResult = main.TRUE |
| |
| for ctrl in main.Cluster.active(): |
| leaderN = ctrl.CLI.electionTestLeader() |
| leaderList.append( leaderN ) |
| if leaderN == main.FALSE: |
| # error in response |
| main.log.error( "Something is wrong with " + |
| "electionTestLeader function, check the" + |
| " error logs" ) |
| leaderResult = main.FALSE |
| elif leaderN is None: |
| main.log.error( ctrl.name + |
| " shows no leader for the election-app was" + |
| " elected after the old one died" ) |
| leaderResult = main.FALSE |
| elif leaderN in partitioned: |
| main.log.error( ctrl.name + " shows " + str( leaderN ) + |
| " as leader for the election-app, but it " + |
| "was partitioned" ) |
| leaderResult = main.FALSE |
| if len( set( leaderList ) ) != 1: |
| leaderResult = main.FALSE |
| main.log.error( |
| "Inconsistent view of leader for the election test app" ) |
| main.log.debug( leaderList ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| def CASE8( self, main ): |
| """ |
| Compare topo |
| """ |
| main.HA.compareTopo( main ) |
| |
| def CASE9( self, main ): |
| """ |
| Link down |
| """ |
| src = main.params['kill']['linkSrc'] |
| dst = main.params['kill']['linkDst'] |
| main.HA.linkDown( main, src, dst ) |
| |
| def CASE10( self, main ): |
| """ |
| Link up |
| """ |
| src = main.params['kill']['linkSrc'] |
| dst = main.params['kill']['linkDst'] |
| main.HA.linkUp( main, src, dst ) |
| |
| def CASE11( self, main ): |
| """ |
| Switch Down |
| """ |
| # NOTE: You should probably run a topology check after this |
| main.HA.switchDown( main ) |
| |
| def CASE12( self, main ): |
| """ |
| Switch Up |
| """ |
| # NOTE: You should probably run a topology check after this |
| main.HA.switchUp( main ) |
| |
| def CASE13( self, main ): |
| """ |
| Clean up |
| """ |
| main.HA.cleanUp( main ) |
| |
| def CASE14( self, main ): |
| """ |
| Start election app on all onos nodes |
| """ |
| main.HA.startElectionApp( main ) |
| |
| def CASE15( self, main ): |
| """ |
| Check that Leadership Election is still functional |
| 15.1 Run election on each node |
| 15.2 Check that each node has the same leaders and candidates |
| 15.3 Find current leader and withdraw |
| 15.4 Check that a new node was elected leader |
| 15.5 Check that that new leader was the candidate of old leader |
| 15.6 Run for election on old leader |
| 15.7 Check that oldLeader is a candidate, and leader if only 1 node |
| 15.8 Make sure that the old leader was added to the candidate list |
| |
| old and new variable prefixes refer to data from before vs after |
| withdrawl and later before withdrawl vs after re-election |
| """ |
| main.HA.isElectionFunctional( main ) |
| |
| def CASE16( self, main ): |
| """ |
| Install Distributed Primitives app |
| """ |
| main.HA.installDistributedPrimitiveApp( main ) |
| |
| def CASE17( self, main ): |
| """ |
| Check for basic functionality with distributed primitives |
| """ |
| main.HA.checkDistPrimitivesFunc( main ) |