| #!/usr/bin/python |
| |
| """ |
| Libraries for Trellis hosts. |
| """ |
| |
| import time |
| import sys |
| sys.path.append('..') |
| from mininet.node import Host |
| from routinglib import RoutedHost, RoutedHost6, Router |
| from stratum import NoOffloadHost |
| |
| class TaggedRoutedHost(RoutedHost): |
| """Host that can be configured with multiple IP addresses.""" |
| def __init__(self, name, ips, gateway, vlan, *args, **kwargs): |
| super(RoutedHost, self).__init__(name, *args, **kwargs) |
| self.ips = ips |
| self.gateway = gateway |
| self.vlan = vlan |
| self.vlanIntf = None |
| |
| def config(self, **kwargs): |
| Host.config(self, **kwargs) |
| intf = self.defaultIntf() |
| self.vlanIntf = "%s.%s" % (intf, self.vlan) |
| self.cmd('ip -4 addr flush dev %s' % intf) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| self.cmd('ip link add link %s name %s type vlan id %s' % (intf, self.vlanIntf, self.vlan)) |
| self.cmd('ip link set up %s' % self.vlanIntf) |
| |
| for ip in self.ips: |
| self.cmd('ip addr add %s dev %s' % (ip, self.vlanIntf)) |
| |
| self.cmd('ip route add default via %s' % self.gateway) |
| intf.name = self.vlanIntf |
| self.nameToIntf[self.vlanIntf] = intf |
| |
| def terminate(self, **kwargs): |
| self.cmd('ip link remove link %s' % self.vlanIntf) |
| super(TaggedRoutedHost, self).terminate() |
| |
| class DualHomedRoutedHost(NoOffloadHost): |
| def __init__(self, name, ips, gateway, *args, **kwargs): |
| super(DualHomedRoutedHost, self).__init__(name, **kwargs) |
| self.bond0 = None |
| self.ips = ips |
| self.gateway = gateway |
| |
| def config(self, **kwargs): |
| super(DualHomedRoutedHost, self).config(**kwargs) |
| self.bondIntfs( self.intfs[0], self.intfs[1] ) |
| |
| for ip in self.ips: |
| self.cmd('ip addr add %s dev %s' % (ip, self.bond0)) |
| |
| self.cmd('ip route add default via %s' % self.gateway) |
| |
| def bondIntfs( self, intf1, intf2, bondedName="bond0" ): |
| ''' |
| Bond two interfaces together |
| intf1 - the first interface to bond |
| intf2 - the second interface to bond |
| bondedName - the prefix of the new interface name |
| ''' |
| # Setup bonded interface |
| # TODO: support multiple bonded interfaces. Maybe just changed self.bond0 to a list of bonded intf names? |
| self.bond0 = "%s-%s" % ( self.name, bondedName ) |
| self.cmd('modprobe bonding') |
| self.cmd('ip link add %s type bond' % self.bond0) |
| self.cmd('ip link set %s down' % intf1.name) |
| self.cmd('ip link set %s down' % intf2.name) |
| self.cmd('ip link set %s master %s' % (intf1.name, self.bond0)) |
| self.cmd('ip link set %s master %s' % (intf2.name, self.bond0)) |
| self.cmd('ip addr flush dev %s' % intf1.name) |
| self.cmd('ip addr flush dev %s' % intf2.name) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| self.cmd('ip link set %s up' % self.bond0) |
| # NOTE: Issues with bonded intfs in mn data structures. Either only show bonded intf |
| # or create a custom class to handle bonded infs?? |
| lowestIntf = min( [ intf1, intf2 ] ) |
| highestIntf = max( [ intf1, intf2 ] ) |
| lowestIntf.name = self.bond0 |
| self.nameToIntf[self.bond0] = lowestIntf |
| del self.intfs[ self.ports[ highestIntf ] ] |
| del self.ports[ highestIntf ] |
| |
| def terminate(self, **kwargs): |
| self.cmd('ip link set %s down' % self.bond0) |
| self.cmd('ip link delete %s' % self.bond0) |
| super(DualHomedRoutedHost, self).terminate() |
| |
| class DualHomedTaggedRoutedHost(DualHomedRoutedHost): |
| def __init__(self, name, ips, gateway, vlan, *args, **kwargs): |
| super(DualHomedTaggedRoutedHost, self).__init__(name, ips, gateway, *args, **kwargs) |
| self.ips = ips |
| self.gateway = gateway |
| self.vlan = vlan |
| self.vlanIntf = None |
| |
| def config(self, **kwargs): |
| super(DualHomedTaggedRoutedHost, self).config(**kwargs) |
| default_intf = self.defaultIntf() |
| self.vlanIntf = "%s.%s" % (default_intf, self.vlan) |
| self.cmd('ip -4 addr flush dev %s' % default_intf) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| self.cmd('ip link add link %s name %s type vlan id %s' % (default_intf, self.vlanIntf, self.vlan)) |
| self.cmd('ip link set up %s' % self.vlanIntf) |
| |
| for ip in self.ips: |
| self.cmd('ip addr add %s dev %s' % (ip, self.vlanIntf)) |
| |
| self.cmd('ip route add default via %s' % self.gateway) |
| default_intf.name = self.vlanIntf |
| self.nameToIntf[self.vlanIntf] = default_intf |
| |
| def terminate(self, **kwargs): |
| self.cmd('ip link remove link %s' % self.vlanIntf) |
| super(DualHomedTaggedRoutedHost, self).terminate() |
| |
| class DhcpClient(Host): |
| def __init__(self, name, *args, **kwargs): |
| super(DhcpClient, self).__init__(name, **kwargs) |
| self.pidFile = '/run/dhclient-%s.pid' % self.name |
| self.leaseFile = '/var/lib/dhcp/dhcpclient-%s.lease' % (self.name, ) |
| |
| def config(self, **kwargs): |
| super(DhcpClient, self).config(**kwargs) |
| self.cmd('ip addr flush dev %s' % self.defaultIntf()) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| self.cmd('dhclient -q -4 -nw -pf %s -lf %s %s' % (self.pidFile, self.leaseFile, self.defaultIntf())) |
| |
| def terminate(self, **kwargs): |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| super(DhcpClient, self).terminate() |
| |
| class Dhcp6Client(Host): |
| def __init__(self, name, *args, **kwargs): |
| super(Dhcp6Client, self).__init__(name, **kwargs) |
| self.pidFile = '/run/dhclient-%s.pid' % self.name |
| self.leaseFile = '/var/lib/dhcp/dhcpclient6-%s.lease' % (self.name, ) |
| |
| def config(self, **kwargs): |
| super(Dhcp6Client, self).config(**kwargs) |
| self.cmd('ip -4 addr flush dev %s' % self.defaultIntf()) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| self.cmd('dhclient -q -6 -nw -pf %s -lf %s %s' % (self.pidFile, self.leaseFile, self.defaultIntf())) |
| |
| def terminate(self, **kwargs): |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| super(Dhcp6Client, self).terminate() |
| |
| class DhcpServer(RoutedHost): |
| binFile = '/usr/sbin/dhcpd' |
| pidFile = '/run/dhcp-server-dhcpd.pid' |
| configFile = './dhcpd.conf' |
| leasesFile = '/var/lib/dhcp/dhcpd.leases' |
| |
| def config(self, **kwargs): |
| super(DhcpServer, self).config(**kwargs) |
| self.cmd('touch %s' % self.leasesFile) |
| self.cmd('%s -q -4 -pf %s -cf %s %s' % (self.binFile, self.pidFile, self.configFile, self.defaultIntf())) |
| |
| def terminate(self, **kwargs): |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| super(DhcpServer, self).terminate() |
| |
| class Dhcp6Server(RoutedHost6): |
| binFile = '/usr/sbin/dhcpd' |
| pidFile = '/run/dhcp-server-dhcpd6.pid' |
| configFile = './dhcpd6.conf' |
| leasesFile = '/var/lib/dhcp/dhcpd6.leases' |
| |
| def config(self, **kwargs): |
| super(Dhcp6Server, self).config(**kwargs) |
| linkLocalAddr = mac_to_ipv6_linklocal(kwargs['mac']) |
| self.cmd('ip -6 addr add dev %s scope link %s' % (self.defaultIntf(), linkLocalAddr)) |
| self.cmd('touch %s' % self.leasesFile) |
| self.cmd('%s -q -6 -pf %s -cf %s %s' % (self.binFile, self.pidFile, self.configFile, self.defaultIntf())) |
| |
| def terminate(self, **kwargs): |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| self.cmd('rm -rf %s' % self.leasesFile) |
| super(Dhcp6Server, self).terminate() |
| |
| class DhcpRelay(Router): |
| binFile = '/usr/sbin/dhcrelay' |
| pidFile = '/run/dhcp-relay.pid' |
| serverIp = None |
| gateway = None |
| |
| def __init__(self, name, serverIp, gateway, *args, **kwargs): |
| super(DhcpRelay, self).__init__(name, **kwargs) |
| self.serverIp = serverIp |
| self.gateway = gateway |
| |
| def config(self, **kwargs): |
| super(DhcpRelay, self).config(**kwargs) |
| ifacesStr = ' '.join(["-i " + ifaceName for ifaceName in self.interfaces.keys()]) |
| self.cmd('route add default gw %s' % self.gateway) |
| self.cmd('%s -4 -a -pf %s %s %s' % (self.binFile, self.pidFile, ifacesStr, self.serverIp)) |
| |
| def terminate(self, **kwargs): |
| self.cmd('kill -9 `cat %s`', self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| super(DhcpRelay, self).terminate() |
| |
| class TaggedDhcpClient(Host): |
| def __init__(self, name, vlan, *args, **kwargs): |
| super(TaggedDhcpClient, self).__init__(name, **kwargs) |
| self.pidFile = '/run/dhclient-%s.pid' % self.name |
| self.vlan = vlan |
| self.vlanIntf = None |
| |
| def config(self, **kwargs): |
| super(TaggedDhcpClient, self).config(**kwargs) |
| self.vlanIntf = "%s.%s" % (self.defaultIntf(), self.vlan) |
| self.cmd('ip addr flush dev %s' % self.defaultIntf()) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| self.cmd('ip link add link %s name %s type vlan id %s' % (self.defaultIntf(), self.vlanIntf, self.vlan)) |
| self.cmd('ip link set up %s' % self.vlanIntf) |
| self.cmd('dhclient -q -4 -nw -pf %s %s' % (self.pidFile, self.vlanIntf)) |
| |
| def terminate(self, **kwargs): |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| self.cmd('ip link remove link %s' % self.vlanIntf) |
| super(TaggedDhcpClient, self).terminate() |
| |
| class TaggedDhcpServer(TaggedRoutedHost): |
| binFile = '/usr/sbin/dhcpd' |
| pidFile = '/run/dhcp-server/dhcpd.pid' |
| configFile = './dhcpd.conf' |
| |
| def config(self, **kwargs): |
| super(TaggedDhcpServer, self).config(**kwargs) |
| self.cmd('%s -q -4 -pf %s -cf %s %s' % (self.binFile, self.pidFile, self.configFile, self.vlanIntf)) |
| |
| def terminate(self, **kwargs): |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| super(TaggedDhcpServer, self).terminate() |
| |
| class DualHomedDhcpClient(Host): |
| def __init__(self, name, *args, **kwargs): |
| super(DualHomedDhcpClient, self).__init__(name, **kwargs) |
| self.pidFile = '/run/dhclient-%s.pid' % self.name |
| self.bond0 = None |
| |
| def config(self, **kwargs): |
| super(DualHomedDhcpClient, self).config(**kwargs) |
| self.bondIntfs( self.intfs[0], self.intfs[1] ) |
| self.cmd('dhclient -q -4 -nw -pf %s %s' % (self.pidFile, self.bond0)) |
| |
| def bondIntfs( self, intf1, intf2, bondedName="bond0" ): |
| ''' |
| Bond two interfaces together |
| intf1 - the first interface to bond |
| intf2 - the second interface to bond |
| bondedName - the prefix of the new interface name |
| ''' |
| # Setup bonded interface |
| # TODO: support multiple bonded interfaces. Maybe just changed self.bond0 to a list of bonded intf names? |
| self.bond0 = "%s-%s" % ( self.name, bondedName ) |
| self.cmd('modprobe bonding') |
| self.cmd('ip link add %s type bond' % self.bond0) |
| self.cmd('ip link set %s down' % intf1.name) |
| self.cmd('ip link set %s down' % intf2.name) |
| self.cmd('ip link set %s master %s' % (intf1.name, self.bond0)) |
| self.cmd('ip link set %s master %s' % (intf2.name, self.bond0)) |
| self.cmd('ip addr flush dev %s' % intf1.name) |
| self.cmd('ip addr flush dev %s' % intf2.name) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| self.cmd('ip link set %s up' % self.bond0) |
| # NOTE: Issues with bonded intfs in mn data structures. Either only show bonded intf |
| # or create a custom class to handle bonded infs?? |
| lowestIntf = min( [ intf1, intf2 ] ) |
| highestIntf = max( [ intf1, intf2 ] ) |
| lowestIntf.name = self.bond0 |
| self.nameToIntf[self.bond0] = lowestIntf |
| del self.intfs[ self.ports[ highestIntf ] ] |
| del self.ports[ highestIntf ] |
| |
| def terminate(self, **kwargs): |
| self.cmd('ip link set %s down' % self.bond0) |
| self.cmd('ip link delete %s' % self.bond0) |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| super(DualHomedDhcpClient, self).terminate() |
| |
| class TrellisHost(NoOffloadHost): |
| def __init__(self, name, ips=[], gateway="", dualHomed=False, vlan=None, dhcpClient=False, dhcpServer=False, ipv6=False, *args, **kwargs): |
| super(TrellisHost, self).__init__(name, *args, **kwargs) |
| self.dualHomed = dualHomed |
| self.bond0 = None |
| self.vlan = vlan |
| self.vlanIntf = None |
| self.dhcpClient = dhcpClient |
| self.dhcpServer = dhcpServer |
| if dhcpClient: |
| self.pidFile = '/run/dhclient-%s.pid' % self.name |
| self.leaseFile = '/var/lib/dhcp/dhcpclient%s-%s.lease' % ("6" if ipv6 else "", self.name) |
| else: |
| self.ips = ips |
| self.gateway = gateway |
| if dhcpServer: |
| self.binFile = '/usr/sbin/dhcpd' |
| self.pidFile = '/run/dhcp-server-dhcpd%s.pid' % ("6" if ipv6 else "") |
| self.configFile = './dhcpd%s.conf' % ("6" if ipv6 else "") |
| self.leasesFile = '/var/lib/dhcp/dhcpd%s.leases' % ("6" if ipv6 else "") |
| self.ipv6 = ipv6 |
| |
| def config(self, **kwargs): |
| super(TrellisHost, self).config(**kwargs) |
| |
| if self.dualHomed: |
| self.bondIntfs( self.intfs[0], self.intfs[1] ) |
| |
| self.cmd('ip %s addr flush dev %s' % ("-4" if self.ipv6 else "", self.defaultIntf())) |
| self.cmd('sysctl -w net.ipv4.ip_forward=0') |
| |
| if not self.ipv6: |
| self.cmd('sysctl -w net.ipv6.conf.all.disable_ipv6=1') |
| |
| if self.vlan: |
| # Setup vlan interface |
| defaultIntf = self.defaultIntf() |
| self.vlanIntf = "%s.%s" % (defaultIntf, self.vlan) |
| self.cmd('ip link add link %s name %s type vlan id %s' % (defaultIntf, self.vlanIntf, self.vlan)) |
| self.cmd('ip link set up %s' % self.vlanIntf) |
| defaultIntf.name = self.vlanIntf |
| self.nameToIntf[self.vlanIntf] = defaultIntf |
| |
| if self.dhcpClient: |
| time.sleep(3) |
| self.cmd('dhclient -q -%s -nw -pf %s -lf %s %s' % (6 if self.ipv6 else 4, self.pidFile, self.leaseFile, self.defaultIntf())) |
| else: |
| # Setup IP addresses |
| for ip in self.ips: |
| self.cmd('ip addr add %s dev %s' % (ip, self.defaultIntf())) |
| self.cmd('ip route add default via %s' % self.gateway) |
| |
| if self.dhcpServer: |
| if self.ipv6: |
| linkLocalAddr = mac_to_ipv6_linklocal(kwargs['mac']) |
| self.cmd('ip -6 addr add dev %s scope link %s' % (self.defaultIntf(), linkLocalAddr)) |
| self.cmd('touch %s' % self.leasesFile) |
| self.cmd('%s -q -%s -pf %s -cf %s %s' % (self.binFile, 6 if self.ipv6 else 4, self.pidFile, self.configFile, self.defaultIntf())) |
| |
| def bondIntfs( self, intf1, intf2, bondedName="bond0" ): |
| ''' |
| Bond two interfaces together |
| intf1 - the first interface to bond |
| intf2 - the second interface to bond |
| bondedName - the prefix of the new interface name |
| ''' |
| # Setup bonded interface |
| # TODO: support multiple bonded interfaces. Maybe just changed self.bond0 to a list of bonded intf names? |
| self.bond0 = "%s-%s" % ( self.name, bondedName ) |
| self.cmd('modprobe bonding') |
| self.cmd('ip link add %s type bond' % self.bond0) |
| self.cmd('ip link set %s down' % intf1.name) |
| self.cmd('ip link set %s down' % intf2.name) |
| self.cmd('ip link set %s master %s' % (intf1.name, self.bond0)) |
| self.cmd('ip link set %s master %s' % (intf2.name, self.bond0)) |
| self.cmd('ip addr flush dev %s' % intf1.name) |
| self.cmd('ip addr flush dev %s' % intf2.name) |
| self.cmd('ip link set %s up' % self.bond0) |
| # NOTE: Issues with bonded intfs in mn data structures. Either only show bonded intf |
| # or create a custom class to handle bonded infs?? |
| lowestIntf = min( [ intf1, intf2 ] ) |
| highestIntf = max( [ intf1, intf2 ] ) |
| lowestIntf.name = self.bond0 |
| self.nameToIntf[self.bond0] = lowestIntf |
| del self.intfs[ self.ports[ highestIntf ] ] |
| del self.ports[ highestIntf ] |
| |
| def terminate(self, **kwargs): |
| if self.vlan: |
| self.cmd('ip link remove link %s' % self.vlanIntf) |
| if self.dualHomed: |
| self.cmd('ip link set %s down' % self.bond0) |
| self.cmd('ip link delete %s' % self.bond0) |
| if self.dhcpClient: |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| self.cmd('rm -rf %s' % self.leaseFile) |
| if self.dhcpServer: |
| self.cmd('kill -9 `cat %s`' % self.pidFile) |
| self.cmd('rm -rf %s' % self.pidFile) |
| super(TrellisHost, self).terminate() |
| |
| # Utility for IPv6 |
| def mac_to_ipv6_linklocal(mac): |
| ''' |
| Convert mac address to link-local IPv6 address |
| ''' |
| # Remove the most common delimiters; dots, dashes, etc. |
| mac_value = int(mac.translate(None, ' .:-'), 16) |
| |
| # Split out the bytes that slot into the IPv6 address |
| # XOR the most significant byte with 0x02, inverting the |
| # Universal / Local bit |
| high2 = mac_value >> 32 & 0xffff ^ 0x0200 |
| high1 = mac_value >> 24 & 0xff |
| low1 = mac_value >> 16 & 0xff |
| low2 = mac_value & 0xffff |
| |
| return 'fe80::{:04x}:{:02x}ff:fe{:02x}:{:04x}'.format(high2, high1, low1, low2) |