| """ |
| Copyright 2016 Open Networking Foundation ( ONF ) |
| |
| Please refer questions to either the onos test mailing list at <onos-test@onosproject.org>, |
| the System Testing Plans and Results wiki page at <https://wiki.onosproject.org/x/voMg>, |
| or the System Testing Guide page at <https://wiki.onosproject.org/x/WYQg> |
| |
| TestON is free software: you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation, either version 2 of the License, or |
| ( at your option ) any later version. |
| |
| TestON is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with TestON. If not, see <http://www.gnu.org/licenses/>. |
| """ |
| import sys |
| import json |
| import time |
| import os |
| """ |
| SCPFscalingMaxIntents |
| Push test Intents to onos |
| CASE10: set up Null Provider |
| CASE11: set up Open Flows |
| Check flows number, if flows number is not as except, finished this test iteration |
| Scale up when reach the Limited |
| Start from 1 nodes, 8 devices. Then Scale up to 3,5,7 nodes |
| """ |
| class SCPFscalingMaxIntents: |
| |
| def __init__( self ): |
| self.default = '' |
| |
| def CASE0( self, main ): |
| import sys |
| import json |
| import time |
| import os |
| import imp |
| try: |
| from tests.dependencies.ONOSSetup import ONOSSetup |
| main.testSetUp = ONOSSetup() |
| except ImportError: |
| main.log.error( "ONOSSetup not found. exiting the test" ) |
| main.cleanAndExit() |
| main.testSetUp.envSetupDescription() |
| stepResult = main.FALSE |
| try: |
| # Test variables |
| main.dependencyPath = main.testOnDirectory + \ |
| main.params[ 'DEPENDENCY' ][ 'path' ] |
| main.cellName = main.params[ 'ENV' ][ 'cellName' ] |
| main.apps = main.params[ 'ENV' ][ 'cellApps' ] |
| main.topology = main.params[ 'DEPENDENCY' ][ 'topology' ] |
| main.scale = ( main.params[ 'SCALE' ] ).split( "," ) |
| main.ONOSport = main.params[ 'CTRL' ][ 'port' ] |
| main.timeout = int( main.params[ 'SLEEP' ][ 'timeout' ] ) |
| main.startUpSleep = int( main.params[ 'SLEEP' ][ 'startup' ] ) |
| main.installSleep = int( main.params[ 'SLEEP' ][ 'install' ] ) |
| main.verifySleep = int( main.params[ 'SLEEP' ][ 'verify' ] ) |
| main.rerouteSleep = int( main.params[ 'SLEEP' ][ 'reroute' ] ) |
| main.intentConfigRegiCfg = main.params[ 'CFG' ][ 'intentConfigRegi' ] |
| main.nullProviderCfg = main.params[ 'CFG' ][ 'nullProvider' ] |
| main.verifyAttempts = int( main.params[ 'ATTEMPTS' ][ 'verify' ] ) |
| main.ingress = main.params[ 'LINK' ][ 'ingress' ] |
| main.egress = main.params[ 'LINK' ][ 'egress' ] |
| main.reroute = main.params[ 'reroute' ] |
| main.flowObj = main.params[ 'TEST' ][ 'flowObj' ] |
| if main.flowObj == "True": |
| main.flowObj = True |
| main.dbFileName = main.params[ 'DATABASE' ][ 'dbFlowObj' ] |
| else: |
| main.flowObj = False |
| main.dbFileName = main.params[ 'DATABASE' ][ 'dbName' ] |
| main.threadID = 0 |
| |
| if main.reroute == "True": |
| main.reroute = True |
| else: |
| main.reroute = False |
| main.setupSkipped = False |
| |
| wrapperFile1 = main.params[ 'DEPENDENCY' ][ 'wrapper1' ] |
| main.nic = main.params[ 'DATABASE' ][ 'nic' ] |
| node = main.params[ 'DATABASE' ][ 'node' ] |
| stepResult = main.testSetUp.envSetup() |
| main.log.info( "Cresting DB file" ) |
| with open( main.dbFileName, "w+" ) as dbFile: |
| dbFile.write( "" ) |
| except Exception as e: |
| main.testSetUp.envSetupException( e ) |
| main.testSetUp.envSetupConclusion( stepResult ) |
| main.commit = main.commit.split( " " )[ 1 ] |
| |
| def CASE1( self ): |
| copyResult = main.ONOSbench.copyMininetFile( main.topology, |
| main.dependencyPath, |
| main.Mininet1.user_name, |
| main.Mininet1.ip_address ) |
| |
| def CASE2( self, main ): |
| """ |
| - Uninstall ONOS cluster |
| - Verify ONOS start up |
| - Install ONOS cluster |
| - Connect to cli |
| """ |
| main.testSetUp.ONOSSetUp( main.Cluster, True, |
| killRemoveMax=False ) |
| |
| def CASE10( self, main ): |
| """ |
| Setting up null-provider |
| """ |
| import json |
| # Activate apps |
| main.step( "Activating null-provider" ) |
| appStatus = utilities.retry( main.Cluster.active( 0 ).CLI.activateApp, |
| main.FALSE, |
| [ 'org.onosproject.null' ], |
| sleep=main.verifySleep, |
| attempts=main.verifyAttempts ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=appStatus, |
| onpass="Successfully activated null-provider", |
| onfail="Failed activate null-provider" ) |
| |
| # Setup the null-provider |
| main.step( "Configuring null-provider" ) |
| cfgStatus = utilities.retry( main.ONOSbench.onosCfgSet, |
| main.FALSE, |
| [ main.Cluster.active( 0 ).ipAddress, |
| main.nullProviderCfg, 'deviceCount 8' ], |
| sleep=main.verifySleep, |
| attempts=main.verifyAttempts ) |
| cfgStatus = cfgStatus and utilities.retry( main.ONOSbench.onosCfgSet, |
| main.FALSE, |
| [ main.Cluster.active( 0 ).ipAddress, |
| main.nullProviderCfg, 'topoShape reroute' ], |
| sleep=main.verifySleep, |
| attempts=main.verifyAttempts ) |
| |
| cfgStatus = cfgStatus and utilities.retry( main.ONOSbench.onosCfgSet, |
| main.FALSE, |
| [ main.Cluster.active( 0 ).ipAddress, |
| main.nullProviderCfg, 'enabled true' ], |
| sleep=main.verifySleep, |
| attempts=main.verifyAttempts ) |
| |
| utilities.assert_equals( expect=main.TRUE, |
| actual=cfgStatus, |
| onpass="Successfully configured null-provider", |
| onfail="Failed to configure null-provider" ) |
| |
| # give onos some time to settle |
| time.sleep( main.startUpSleep ) |
| |
| main.log.info( "Setting default flows to zero" ) |
| main.defaultFlows = 0 |
| |
| main.step( "Check status of null-provider setup" ) |
| caseResult = appStatus and cfgStatus |
| utilities.assert_equals( expect=main.TRUE, |
| actual=caseResult, |
| onpass="Setting up null-provider was successfull", |
| onfail="Failed to setup null-provider" ) |
| |
| # This tells the following cases if we are using the null-provider or ovs |
| main.switchType = "null:" |
| |
| # If the null-provider setup was unsuccessfull, then there is no point to |
| # run the subsequent cases |
| |
| time.sleep( main.startUpSleep ) |
| main.step( "Balancing Masters" ) |
| |
| stepResult = main.FALSE |
| stepResult = utilities.retry( main.Cluster.active( 0 ).CLI.balanceMasters, |
| main.FALSE, |
| [], |
| sleep=3, |
| attempts=3 ) |
| |
| utilities.assert_equals( expect=main.TRUE, |
| actual=stepResult, |
| onpass="Balance masters was successfull", |
| onfail="Failed to balance masters" ) |
| |
| time.sleep( 5 ) |
| if not caseResult: |
| main.setupSkipped = True |
| |
| def CASE11( self, main ): |
| """ |
| Setting up mininet |
| """ |
| import json |
| import time |
| devices = [] |
| devices = main.Cluster.active( 0 ).CLI.getAllDevicesId() |
| for d in devices: |
| main.Cluster.active( 0 ).CLI.deviceRemove( d ) |
| |
| time.sleep( main.startUpSleep ) |
| if main.flowObj: |
| main.Cluster.active( 0 ).CLI.setCfg( main.intentConfigRegiCfg, |
| "useFlowObjectives", value="true" ) |
| main.step( 'Starting mininet topology' ) |
| mnStatus = main.Mininet1.startNet( topoFile='~/mininet/custom/rerouteTopo.py' ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=mnStatus, |
| onpass="Successfully started Mininet", |
| onfail="Failed to activate Mininet" ) |
| |
| main.step( "Assinging masters to switches" ) |
| switches = main.Mininet1.getSwitches() |
| swStatus = main.Mininet1.assignSwController( sw=switches.keys(), ip=main.Cluster.getIps() ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=swStatus, |
| onpass="Successfully assigned switches to masters", |
| onfail="Failed assign switches to masters" ) |
| |
| time.sleep( main.startUpSleep ) |
| # Balancing Masters |
| main.step( "Balancing Masters" ) |
| stepResult = main.FALSE |
| stepResult = utilities.retry( main.Cluster.active( 0 ).CLI.balanceMasters, |
| main.FALSE, |
| [], |
| sleep=3, |
| attempts=3 ) |
| |
| utilities.assert_equals( expect=main.TRUE, |
| actual=stepResult, |
| onpass="Balance masters was successfull", |
| onfail="Failed to balance masters" ) |
| |
| main.log.info( "Getting default flows" ) |
| jsonSum = json.loads( main.Cluster.active( 0 ).CLI.summary() ) |
| main.defaultFlows = jsonSum[ "flows" ] |
| |
| main.step( "Check status of Mininet setup" ) |
| caseResult = mnStatus and swStatus |
| utilities.assert_equals( expect=main.TRUE, |
| actual=caseResult, |
| onpass="Successfully setup Mininet", |
| onfail="Failed setup Mininet" ) |
| |
| # This tells the following cases if we are using the null-provider or ovs |
| main.switchType = "of:" |
| |
| time.sleep( main.startUpSleep ) |
| main.step( "Balancing Masters" ) |
| |
| stepResult = main.FALSE |
| stepResult = utilities.retry( main.Cluster.active( 0 ).CLI.balanceMasters, |
| main.FALSE, |
| [], |
| sleep=3, |
| attempts=3 ) |
| |
| utilities.assert_equals( expect=main.TRUE, |
| actual=stepResult, |
| onpass="Balance masters was successfull", |
| onfail="Failed to balance masters" ) |
| |
| time.sleep( 5 ) |
| if not caseResult: |
| main.setupSkipped = True |
| |
| def CASE20( self, main ): |
| try: |
| from tests.dependencies.utils import Utils |
| except ImportError: |
| main.log.error( "Utils not found exiting the test" ) |
| main.cleanAndExit() |
| try: |
| main.Utils |
| except ( NameError, AttributeError ): |
| main.Utils = Utils() |
| if main.reroute: |
| main.minIntents = int( main.params[ 'NULL' ][ 'REROUTE' ][ 'min_intents' ] ) |
| main.maxIntents = int( main.params[ 'NULL' ][ 'REROUTE' ][ 'max_intents' ] ) |
| main.checkInterval = int( main.params[ 'NULL' ][ 'REROUTE' ][ 'check_interval' ] ) |
| main.batchSize = int( main.params[ 'NULL' ][ 'REROUTE' ][ 'batch_size' ] ) |
| else: |
| main.minIntents = int( main.params[ 'NULL' ][ 'PUSH' ][ 'min_intents' ] ) |
| main.maxIntents = int( main.params[ 'NULL' ][ 'PUSH' ][ 'max_intents' ] ) |
| main.checkInterval = int( main.params[ 'NULL' ][ 'PUSH' ][ 'check_interval' ] ) |
| main.batchSize = int( main.params[ 'NULL' ][ 'PUSH' ][ 'batch_size' ] ) |
| |
| # check if the case needs to be skipped |
| if main.setupSkipped: |
| main.setupSkipped = False |
| main.skipCase() |
| |
| # the index where the next intents will be installed |
| offfset = 0 |
| # keeps track of how many intents have been installed |
| currIntents = 0 |
| # keeps track of how many flows have been installed, set to 0 at start |
| currFlows = 0 |
| # limit for the number of intents that can be installed |
| main.batchSize = int( int( main.batchSize ) / main.Cluster.numCtrls ) |
| limit = main.maxIntents / main.batchSize |
| # total intents installed |
| totalIntents = 0 |
| |
| intentsState = None |
| |
| offtmp = 0 |
| main.step( "Pushing intents" ) |
| stepResult = main.TRUE |
| # temp variable to contain the number of flows |
| flowsNum = 0 |
| if main.Cluster.numCtrls > 1: |
| # if more than one onos nodes, we should check more frequently |
| main.checkInterval = main.checkInterval / 4 |
| |
| # make sure the checkInterval divisible batchSize |
| main.checkInterval = int( int( main.checkInterval / main.batchSize ) * main.batchSize ) |
| flowTemp = 0 |
| intentVerifyTemp = 0 |
| totalFlows = 0 |
| for i in range( limit ): |
| |
| # Threads pool |
| pool = [] |
| |
| for j in range( main.Cluster.numCtrls ): |
| if main.Cluster.numCtrls > 1: |
| time.sleep( 1 ) |
| offtmp = offfset + main.maxIntents * j |
| # Push intents by using threads |
| t = main.Thread( target=main.Cluster.active( j ).CLI.pushTestIntents, |
| threadID=main.threadID, |
| name="Push-Test-Intents", |
| args=[ main.switchType + main.ingress, |
| main.switchType + main.egress, |
| main.batchSize ], |
| kwargs={ "offset": offtmp, |
| "options": "-i", |
| "timeout": main.timeout, |
| "background": False, |
| "noExit": True } ) |
| pool.append( t ) |
| t.start() |
| main.threadID = main.threadID + 1 |
| for t in pool: |
| t.join() |
| stepResult = stepResult and t.result |
| offfset = offfset + main.batchSize |
| |
| totalIntents = main.batchSize * main.Cluster.numCtrls + totalIntents |
| if totalIntents >= main.minIntents and totalIntents % main.checkInterval == 0: |
| # if reach to minimum number and check interval, verify Intetns and flows |
| time.sleep( main.verifySleep * main.Cluster.numCtrls ) |
| |
| main.log.info( "Verify Intents states" ) |
| # k is a control variable for verify retry attempts |
| k = 1 |
| while k <= main.verifyAttempts: |
| # while loop for check intents by using CLI driver |
| time.sleep( 5 ) |
| intentsState = main.Cluster.active( 0 ).CLI.checkIntentSummary( timeout=600, noExit=True ) |
| if intentsState: |
| verifyTotalIntents = main.Cluster.active( 0 ).CLI.getTotalIntentsNum( timeout=600, noExit=True ) |
| if intentVerifyTemp < verifyTotalIntents: |
| intentVerifyTemp = verifyTotalIntents |
| else: |
| verifyTotalIntents = intentVerifyTemp |
| intentsState = False |
| main.log.info( "Total Installed Intents: {}".format( verifyTotalIntents ) ) |
| break |
| k = k + 1 |
| |
| k = 1 |
| flowVerify = True |
| while k <= main.verifyAttempts: |
| time.sleep( 5 ) |
| totalFlows = main.Cluster.active( 0 ).CLI.getTotalFlowsNum( timeout=600, noExit=True ) |
| expectFlows = totalIntents * 7 + main.defaultFlows |
| if totalFlows == expectFlows: |
| main.log.info( "Total Flows Added: {}".format( totalFlows ) ) |
| break |
| else: |
| main.log.info( "Some Flows are not added, retry..." ) |
| main.log.info( "Total Flows Added: {} Expect Flows: {}".format( totalFlows, expectFlows ) ) |
| flowVerify = False |
| |
| k += 1 |
| if flowTemp < totalFlows: |
| flowTemp = totalFlows |
| else: |
| totalFlows = flowTemp |
| |
| if not intentsState or not flowVerify: |
| # If some intents are not installed, grep the previous flows list, and finished this test case |
| main.log.warn( "Intents or flows are not installed" ) |
| verifyTotalIntents = main.Cluster.active( 0 ).CLI.getTotalIntentsNum( timeout=600, noExit=True ) |
| if intentVerifyTemp < verifyTotalIntents: |
| intentVerifyTemp = verifyTotalIntents |
| else: |
| verifyTotalIntents = intentVerifyTemp |
| if flowTemp < totalFlows: |
| flowTemp = totalFlows |
| else: |
| totalFlows = flowTemp |
| main.log.info( "Total Intents: {}".format( verifyTotalIntents ) ) |
| break |
| |
| utilities.assert_equals( expect=main.TRUE, |
| actual=intentsState, |
| onpass="Successfully pushed and verified intents", |
| onfail="Failed to push and verify intents" ) |
| |
| main.log.info( "Total Intents Installed before crash: {}".format( totalIntents ) ) |
| main.log.info( "Total Flows ADDED before crash: {}".format( totalFlows ) ) |
| |
| main.Utils.mininetCleanup( main.Mininet1 ) |
| |
| main.log.info( "Writing results to DS file" ) |
| with open( main.dbFileName, "a" ) as dbFile: |
| # Scale number |
| temp = "'" + main.commit + "'," |
| temp += "'" + main.nic + "'," |
| temp += str( main.Cluster.numCtrls ) |
| temp += ",'" + "baremetal1" + "'" |
| # how many intents we installed before crash |
| temp += "," + str( verifyTotalIntents ) |
| # how many flows we installed before crash |
| temp += "," + str( totalFlows ) |
| # other columns in database, but we didn't use in this test |
| temp += "," + "0,0,0,0,0,0,0,0" |
| temp += "\n" |
| dbFile.write( temp ) |