| """ |
| Description: This test is to determine how ONOS behaves in a control network |
| partion. ONOS 1,2,3 will be split into a sub cluster and ONOS |
| 4,5,6,7 will be in another sub-cluster. |
| |
| List of test cases: |
| CASE1: Compile ONOS and push it to the test machines |
| CASE2: Assign mastership to controllers |
| CASE3: Assign intents |
| CASE4: Ping across added host intents |
| CASE5: Reading state of ONOS |
| CASE6: The Failure case. We will create IPTables rules here. |
| CASE7: Check state after control plane partition. |
| CASE8: Compare topo |
| CASE9: Link s3-s28 down |
| CASE10: Link s3-s28 up |
| CASE11: Switch down |
| CASE12: Switch up |
| CASE13: Clean up |
| CASE14: start election app on all onos nodes |
| CASE15: Check that Leadership Election is still functional |
| CASE16: Repair network partition |
| """ |
| # FIXME: Add new comparison case for during the failure? |
| class HATestNetworkPartition: |
| |
| def __init__( self ): |
| self.default = '' |
| |
| def CASE1( self, main ): |
| """ |
| CASE1 is to compile ONOS and push it to the test machines |
| |
| Startup sequence: |
| cell <name> |
| onos-verify-cell |
| NOTE: temporary - onos-remove-raft-logs |
| onos-uninstall |
| start mininet |
| git pull |
| mvn clean install |
| onos-package |
| onos-install -f |
| onos-wait-for-start |
| start cli sessions |
| start tcpdump |
| """ |
| main.log.report( "ONOS HA test: Network partition - initialization" ) |
| main.log.report( "This test will partition a 7 node cluster into " + |
| "3 node and 4 node sub clusters by blocking " + |
| "communication between nodes." ) |
| main.case( "Setting up test environment" ) |
| # TODO: save all the timers and output them for plotting |
| |
| # load some vairables from the params file |
| PULLCODE = False |
| if main.params[ 'Git' ] == 'True': |
| PULLCODE = True |
| gitBranch = main.params[ 'branch' ] |
| cellName = main.params[ 'ENV' ][ 'cellName' ] |
| |
| # set global variables |
| global ONOS1Ip |
| global ONOS1Port |
| global ONOS2Ip |
| global ONOS2Port |
| global ONOS3Ip |
| global ONOS3Port |
| global ONOS4Ip |
| global ONOS4Port |
| global ONOS5Ip |
| global ONOS5Port |
| global ONOS6Ip |
| global ONOS6Port |
| global ONOS7Ip |
| global ONOS7Port |
| global numControllers |
| |
| ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ] |
| ONOS1Port = main.params[ 'CTRL' ][ 'port1' ] |
| ONOS2Ip = main.params[ 'CTRL' ][ 'ip2' ] |
| ONOS2Port = main.params[ 'CTRL' ][ 'port2' ] |
| ONOS3Ip = main.params[ 'CTRL' ][ 'ip3' ] |
| ONOS3Port = main.params[ 'CTRL' ][ 'port3' ] |
| ONOS4Ip = main.params[ 'CTRL' ][ 'ip4' ] |
| ONOS4Port = main.params[ 'CTRL' ][ 'port4' ] |
| ONOS5Ip = main.params[ 'CTRL' ][ 'ip5' ] |
| ONOS5Port = main.params[ 'CTRL' ][ 'port5' ] |
| ONOS6Ip = main.params[ 'CTRL' ][ 'ip6' ] |
| ONOS6Port = main.params[ 'CTRL' ][ 'port6' ] |
| ONOS7Ip = main.params[ 'CTRL' ][ 'ip7' ] |
| ONOS7Port = main.params[ 'CTRL' ][ 'port7' ] |
| numControllers = int( main.params[ 'num_controllers' ] ) |
| |
| main.step( "Applying cell variable to environment" ) |
| cellResult = main.ONOSbench.setCell( cellName ) |
| verifyResult = main.ONOSbench.verifyCell() |
| |
| # FIXME:this is short term fix |
| main.log.report( "Removing raft logs" ) |
| main.ONOSbench.onosRemoveRaftLogs() |
| main.log.report( "Uninstalling ONOS" ) |
| main.ONOSbench.onosUninstall( ONOS1Ip ) |
| main.ONOSbench.onosUninstall( ONOS2Ip ) |
| main.ONOSbench.onosUninstall( ONOS3Ip ) |
| main.ONOSbench.onosUninstall( ONOS4Ip ) |
| main.ONOSbench.onosUninstall( ONOS5Ip ) |
| main.ONOSbench.onosUninstall( ONOS6Ip ) |
| main.ONOSbench.onosUninstall( ONOS7Ip ) |
| |
| cleanInstallResult = main.TRUE |
| gitPullResult = main.TRUE |
| |
| main.step( "Starting Mininet" ) |
| main.Mininet1.startNet( ) |
| |
| main.step( "Compiling the latest version of ONOS" ) |
| if PULLCODE: |
| main.step( "Git checkout and pull " + gitBranch ) |
| main.ONOSbench.gitCheckout( gitBranch ) |
| gitPullResult = main.ONOSbench.gitPull() |
| |
| main.step( "Using mvn clean & install" ) |
| cleanInstallResult = main.ONOSbench.cleanInstall() |
| else: |
| main.log.warn( "Did not pull new code so skipping mvn " + |
| "clean install" ) |
| main.ONOSbench.getVersion( report=True ) |
| |
| main.step( "Creating ONOS package" ) |
| packageResult = main.ONOSbench.onosPackage() |
| |
| main.step( "Installing ONOS package" ) |
| onos1InstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS1Ip ) |
| onos2InstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS2Ip ) |
| onos3InstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS3Ip ) |
| onos4InstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS4Ip ) |
| onos5InstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS5Ip ) |
| onos6InstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS6Ip ) |
| onos7InstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS7Ip ) |
| onosInstallResult = onos1InstallResult and onos2InstallResult\ |
| and onos3InstallResult and onos4InstallResult\ |
| and onos5InstallResult and onos6InstallResult\ |
| and onos7InstallResult |
| |
| main.step( "Checking if ONOS is up yet" ) |
| for i in range( 2 ): |
| onos1Isup = main.ONOSbench.isup( ONOS1Ip ) |
| if not onos1Isup: |
| main.log.report( "ONOS1 didn't start!" ) |
| main.ONOSbench.onosStop( ONOS1Ip ) |
| main.ONOSbench.onosStart( ONOS1Ip ) |
| onos2Isup = main.ONOSbench.isup( ONOS2Ip ) |
| if not onos2Isup: |
| main.log.report( "ONOS2 didn't start!" ) |
| main.ONOSbench.onosStop( ONOS2Ip ) |
| main.ONOSbench.onosStart( ONOS2Ip ) |
| onos3Isup = main.ONOSbench.isup( ONOS3Ip ) |
| if not onos3Isup: |
| main.log.report( "ONOS3 didn't start!" ) |
| main.ONOSbench.onosStop( ONOS3Ip ) |
| main.ONOSbench.onosStart( ONOS3Ip ) |
| onos4Isup = main.ONOSbench.isup( ONOS4Ip ) |
| if not onos4Isup: |
| main.log.report( "ONOS4 didn't start!" ) |
| main.ONOSbench.onosStop( ONOS4Ip ) |
| main.ONOSbench.onosStart( ONOS4Ip ) |
| onos5Isup = main.ONOSbench.isup( ONOS5Ip ) |
| if not onos5Isup: |
| main.log.report( "ONOS5 didn't start!" ) |
| main.ONOSbench.onosStop( ONOS5Ip ) |
| main.ONOSbench.onosStart( ONOS5Ip ) |
| onos6Isup = main.ONOSbench.isup( ONOS6Ip ) |
| if not onos6Isup: |
| main.log.report( "ONOS6 didn't start!" ) |
| main.ONOSbench.onosStop( ONOS6Ip ) |
| main.ONOSbench.onosStart( ONOS6Ip ) |
| onos7Isup = main.ONOSbench.isup( ONOS7Ip ) |
| if not onos7Isup: |
| main.log.report( "ONOS7 didn't start!" ) |
| main.ONOSbench.onosStop( ONOS7Ip ) |
| main.ONOSbench.onosStart( ONOS7Ip ) |
| onosIsupResult = onos1Isup and onos2Isup and onos3Isup\ |
| and onos4Isup and onos5Isup and onos6Isup and onos7Isup |
| if onosIsupResult == main.TRUE: |
| break |
| |
| cliResult1 = main.ONOScli1.startOnosCli( ONOS1Ip ) |
| cliResult2 = main.ONOScli2.startOnosCli( ONOS2Ip ) |
| cliResult3 = main.ONOScli3.startOnosCli( ONOS3Ip ) |
| cliResult4 = main.ONOScli4.startOnosCli( ONOS4Ip ) |
| cliResult5 = main.ONOScli5.startOnosCli( ONOS5Ip ) |
| cliResult6 = main.ONOScli6.startOnosCli( ONOS6Ip ) |
| cliResult7 = main.ONOScli7.startOnosCli( ONOS7Ip ) |
| cliResults = cliResult1 and cliResult2 and cliResult3 and\ |
| cliResult4 and cliResult5 and cliResult6 and cliResult7 |
| |
| main.step( "Start Packet Capture MN" ) |
| main.Mininet2.startTcpdump( |
| str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST ) |
| + "-MN.pcap", |
| intf=main.params[ 'MNtcpdump' ][ 'intf' ], |
| port=main.params[ 'MNtcpdump' ][ 'port' ] ) |
| |
| case1Result = ( cleanInstallResult and packageResult and |
| cellResult and verifyResult and onosInstallResult |
| and onosIsupResult and cliResults ) |
| |
| utilities.assert_equals( expect=main.TRUE, actual=case1Result, |
| onpass="Test startup successful", |
| onfail="Test startup NOT successful" ) |
| |
| if case1Result == main.FALSE: |
| main.cleanup() |
| main.exit() |
| |
| def CASE2( self, main ): |
| """ |
| Assign mastership to controllers |
| """ |
| import re |
| |
| main.log.report( "Assigning switches to controllers" ) |
| main.case( "Assigning Controllers" ) |
| main.step( "Assign switches to controllers" ) |
| |
| for i in range( 1, 29 ): |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| count=numControllers, |
| ip1=ONOS1Ip, port1=ONOS1Port, |
| ip2=ONOS2Ip, port2=ONOS2Port, |
| ip3=ONOS3Ip, port3=ONOS3Port, |
| ip4=ONOS4Ip, port4=ONOS4Port, |
| ip5=ONOS5Ip, port5=ONOS5Port, |
| ip6=ONOS6Ip, port6=ONOS6Port, |
| ip7=ONOS7Ip, port7=ONOS7Port ) |
| |
| mastershipCheck = main.TRUE |
| for i in range( 1, 29 ): |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| try: |
| main.log.info( str( response ) ) |
| except: |
| main.log.info( repr( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response )\ |
| and re.search( "tcp:" + ONOS2Ip, response )\ |
| and re.search( "tcp:" + ONOS3Ip, response )\ |
| and re.search( "tcp:" + ONOS4Ip, response )\ |
| and re.search( "tcp:" + ONOS5Ip, response )\ |
| and re.search( "tcp:" + ONOS6Ip, response )\ |
| and re.search( "tcp:" + ONOS7Ip, response ): |
| mastershipCheck = mastershipCheck and main.TRUE |
| else: |
| mastershipCheck = main.FALSE |
| if mastershipCheck == main.TRUE: |
| main.log.report( "Switch mastership assigned correctly" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=mastershipCheck, |
| onpass="Switch mastership assigned correctly", |
| onfail="Switches not assigned correctly to controllers" ) |
| |
| # Manually assign mastership to the controller we want |
| roleCall = main.TRUE |
| roleCheck = main.TRUE |
| |
| # Assign switch |
| deviceId = main.ONOScli1.getDevice( "1000" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS1Ip ) |
| # Check assignment |
| if ONOS1Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| # Assign switch |
| deviceId = main.ONOScli1.getDevice( "2800" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS1Ip ) |
| # Check assignment |
| if ONOS1Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| # Assign switch |
| deviceId = main.ONOScli1.getDevice( "2000" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS2Ip ) |
| # Check assignment |
| if ONOS2Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| # Assign switch |
| deviceId = main.ONOScli1.getDevice( "3000" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS2Ip ) |
| # Check assignment |
| if ONOS2Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| # Assign switch |
| deviceId = main.ONOScli1.getDevice( "5000" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS3Ip ) |
| # Check assignment |
| if ONOS3Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| # Assign switch |
| deviceId = main.ONOScli1.getDevice( "6000" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS3Ip ) |
| # Check assignment |
| if ONOS3Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| # Assign switch |
| deviceId = main.ONOScli1.getDevice( "3004" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS4Ip ) |
| # Check assignment |
| if ONOS4Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| for i in range( 8, 18 ): |
| dpid = '3' + str( i ).zfill( 3 ) |
| deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS5Ip ) |
| # Check assignment |
| if ONOS5Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| deviceId = main.ONOScli1.getDevice( "6007" ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS6Ip ) |
| # Check assignment |
| if ONOS6Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| for i in range( 18, 28 ): |
| dpid = '6' + str( i ).zfill( 3 ) |
| deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' ) |
| roleCall = roleCall and main.ONOScli1.deviceRole( |
| deviceId, |
| ONOS7Ip ) |
| # Check assignment |
| if ONOS7Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ): |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=roleCall, |
| onpass="Re-assigned switch mastership to designated controller", |
| onfail="Something wrong with deviceRole calls" ) |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=roleCheck, |
| onpass="Switches were successfully reassigned to designated " + |
| "controller", |
| onfail="Switches were not successfully reassigned" ) |
| mastershipCheck = mastershipCheck and roleCall and roleCheck |
| utilities.assert_equals( expect=main.TRUE, actual=mastershipCheck, |
| onpass="Switch mastership correctly assigned", |
| onfail="Error in (re)assigning switch" + |
| " mastership" ) |
| |
| def CASE3( self, main ): |
| """ |
| Assign intents |
| """ |
| import time |
| import json |
| main.log.report( "Adding host intents" ) |
| main.case( "Adding host Intents" ) |
| |
| main.step( "Discovering Hosts( Via pingall for now )" ) |
| # FIXME: Once we have a host discovery mechanism, use that instead |
| |
| # install onos-app-fwd |
| main.log.info( "Install reactive forwarding app" ) |
| appResults = CLIs[0].activateApp( "org.onosproject.fwd" ) |
| ''' |
| main.ONOScli1.featureInstall( "onos-app-fwd" ) |
| main.ONOScli2.featureInstall( "onos-app-fwd" ) |
| main.ONOScli3.featureInstall( "onos-app-fwd" ) |
| main.ONOScli4.featureInstall( "onos-app-fwd" ) |
| main.ONOScli5.featureInstall( "onos-app-fwd" ) |
| main.ONOScli6.featureInstall( "onos-app-fwd" ) |
| main.ONOScli7.featureInstall( "onos-app-fwd" ) |
| ''' |
| |
| # REACTIVE FWD test |
| pingResult = main.FALSE |
| time1 = time.time() |
| pingResult = main.Mininet1.pingall() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=pingResult, |
| onpass="Reactive Pingall test passed", |
| onfail="Reactive Pingall failed, one or more ping pairs failed" ) |
| time2 = time.time() |
| main.log.info( "Time for pingall: %2f seconds" % ( time2 - time1 ) ) |
| |
| # uninstall onos-app-fwd |
| main.log.info( "Uninstall reactive forwarding app" ) |
| appResults = appResults and CLIs[0].deactivateApp( "org.onosproject.fwd" ) |
| ''' |
| main.ONOScli1.featureUninstall( "onos-app-fwd" ) |
| main.ONOScli2.featureUninstall( "onos-app-fwd" ) |
| main.ONOScli3.featureUninstall( "onos-app-fwd" ) |
| main.ONOScli4.featureUninstall( "onos-app-fwd" ) |
| main.ONOScli5.featureUninstall( "onos-app-fwd" ) |
| main.ONOScli6.featureUninstall( "onos-app-fwd" ) |
| main.ONOScli7.featureUninstall( "onos-app-fwd" ) |
| ''' |
| # timeout for fwd flows |
| time.sleep( 10 ) |
| |
| main.step( "Add host intents" ) |
| # TODO: move the host numbers to params |
| # Maybe look at all the paths we ping? |
| intentAddResult = True |
| for i in range( 8, 18 ): |
| main.log.info( "Adding host intent between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| host1 = "00:00:00:00:00:" + \ |
| str( hex( i )[ 2: ] ).zfill( 2 ).upper() |
| host2 = "00:00:00:00:00:" + \ |
| str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper() |
| # NOTE: getHost can return None |
| host1Dict = main.ONOScli1.getHost( host1 ) |
| host2Dict = main.ONOScli1.getHost( host2 ) |
| host1Id = None |
| host2Id = None |
| if host1Dict and host2Dict: |
| host1Id = host1Dict.get( 'id', None ) |
| host2Id = host2Dict.get( 'id', None ) |
| if host1Id and host2Id: |
| # distribute the intents across ONOS nodes |
| nodeNum = ( i % 7 ) + 1 |
| node = getattr( main, ( 'ONOScli' + str( nodeNum ) ) ) |
| tmpResult = node.addHostIntent( |
| host1Id, |
| host2Id ) |
| else: |
| main.log.error( "Error, getHost() failed" ) |
| main.log.warn( json.dumps( json.loads( main.ONOScli1.hosts() ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| tmpResult = main.FALSE |
| intentAddResult = bool( pingResult and intentAddResult |
| and tmpResult ) |
| # FIXME Check that intents were added? |
| # TODO Use the new return from add host command and look at each |
| # intent individually |
| # |
| # |
| # |
| # |
| # |
| # |
| # End of for loop to add intents |
| # Print the intent states |
| intents = main.ONOScli1.intents( ) |
| intentStates = [] |
| for intent in json.loads( intents ): # Iter through intents of a node |
| intentStates.append( intent.get( 'state', None ) ) |
| out = [ (i, intentStates.count( i ) ) for i in set( intentStates ) ] |
| main.log.info( dict( out ) ) |
| |
| utilities.assert_equals( |
| expect=True, |
| actual=intentAddResult, |
| onpass="Pushed host intents to ONOS", |
| onfail="Error in pushing host intents to ONOS" ) |
| # TODO Check if intents all exist in datastore |
| |
| def CASE4( self, main ): |
| """ |
| Ping across added host intents |
| """ |
| import json |
| description = " Ping across added host intents" |
| main.log.report( description ) |
| main.case( description ) |
| PingResult = main.TRUE |
| for i in range( 8, 18 ): |
| ping = main.Mininet1.pingHost( |
| src="h" + str( i ), target="h" + str( i + 10 ) ) |
| PingResult = PingResult and ping |
| if ping == main.FALSE: |
| main.log.warn( "Ping failed between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| elif ping == main.TRUE: |
| main.log.info( "Ping test passed!" ) |
| # Don't set PingResult or you'd override failures |
| if PingResult == main.FALSE: |
| main.log.report( |
| "Intents have not been installed correctly, pings failed." ) |
| main.log.warn( "ONOS1 intents: " ) |
| main.log.warn( json.dumps( json.loads( main.ONOScli1.intents() ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| if PingResult == main.TRUE: |
| main.log.report( |
| "Intents have been installed correctly and verified by pings" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=PingResult, |
| onpass="Intents have been installed correctly and pings work", |
| onfail="Intents have not been installed correctly, pings failed." ) |
| |
| def CASE5( self, main ): |
| """ |
| Reading state of ONOS |
| """ |
| import json |
| # assumes that sts is already in you PYTHONPATH |
| from sts.topology.teston_topology import TestONTopology |
| |
| main.log.report( "Setting up and gathering data for current state" ) |
| main.case( "Setting up and gathering data for current state" ) |
| # The general idea for this test case is to pull the state of |
| # ( intents,flows, topology,... ) from each ONOS node |
| # We can then compare them with eachother and also with past states |
| |
| main.step( "Get the Mastership of each switch from each controller" ) |
| global mastershipState |
| mastershipState = [] |
| |
| # Assert that each device has a master |
| ONOS1MasterNotNull = main.ONOScli1.rolesNotNull() |
| ONOS2MasterNotNull = main.ONOScli2.rolesNotNull() |
| ONOS3MasterNotNull = main.ONOScli3.rolesNotNull() |
| ONOS4MasterNotNull = main.ONOScli4.rolesNotNull() |
| ONOS5MasterNotNull = main.ONOScli5.rolesNotNull() |
| ONOS6MasterNotNull = main.ONOScli6.rolesNotNull() |
| ONOS7MasterNotNull = main.ONOScli7.rolesNotNull() |
| rolesNotNull = ONOS1MasterNotNull and ONOS2MasterNotNull and\ |
| ONOS3MasterNotNull and ONOS4MasterNotNull and\ |
| ONOS5MasterNotNull and ONOS6MasterNotNull and\ |
| ONOS7MasterNotNull |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=rolesNotNull, |
| onpass="Each device has a master", |
| onfail="Some devices don't have a master assigned" ) |
| |
| ONOS1Mastership = main.ONOScli1.roles() |
| ONOS2Mastership = main.ONOScli2.roles() |
| ONOS3Mastership = main.ONOScli3.roles() |
| ONOS4Mastership = main.ONOScli4.roles() |
| ONOS5Mastership = main.ONOScli5.roles() |
| ONOS6Mastership = main.ONOScli6.roles() |
| ONOS7Mastership = main.ONOScli7.roles() |
| if "Error" in ONOS1Mastership or not ONOS1Mastership\ |
| or "Error" in ONOS2Mastership or not ONOS2Mastership\ |
| or "Error" in ONOS3Mastership or not ONOS3Mastership\ |
| or "Error" in ONOS4Mastership or not ONOS4Mastership\ |
| or "Error" in ONOS5Mastership or not ONOS5Mastership\ |
| or "Error" in ONOS6Mastership or not ONOS6Mastership\ |
| or "Error" in ONOS7Mastership or not ONOS7Mastership: |
| main.log.report( "Error in getting ONOS roles" ) |
| for i in range( 1, numControllers + 1 ): |
| mastership = eval( "ONOS" + str( i ) + "Mastership" ) |
| main.log.warn( |
| "ONOS" + str( i ) + " mastership response: " + |
| repr( mastership ) ) |
| consistentMastership = main.FALSE |
| elif ONOS1Mastership == ONOS2Mastership\ |
| and ONOS1Mastership == ONOS3Mastership\ |
| and ONOS1Mastership == ONOS4Mastership\ |
| and ONOS1Mastership == ONOS5Mastership\ |
| and ONOS1Mastership == ONOS6Mastership\ |
| and ONOS1Mastership == ONOS7Mastership: |
| mastershipState = ONOS1Mastership |
| consistentMastership = main.TRUE |
| main.log.report( |
| "Switch roles are consistent across all ONOS nodes" ) |
| else: |
| for i in range( 1, numControllers + 1 ): |
| mastership = eval( "ONOS" + str( i ) + "Mastership" ) |
| main.log.warn( "ONOS" + str( i ) + " roles: " + |
| json.dumps( json.loads( mastership ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| consistentMastership = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentMastership, |
| onpass="Switch roles are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of switch roles" ) |
| |
| main.step( "Get the intents from each controller" ) |
| global intentState |
| intentState = [] |
| ONOS1Intents = main.ONOScli1.intents( jsonFormat=True ) |
| ONOS2Intents = main.ONOScli2.intents( jsonFormat=True ) |
| ONOS3Intents = main.ONOScli3.intents( jsonFormat=True ) |
| ONOS4Intents = main.ONOScli4.intents( jsonFormat=True ) |
| ONOS5Intents = main.ONOScli5.intents( jsonFormat=True ) |
| ONOS6Intents = main.ONOScli6.intents( jsonFormat=True ) |
| ONOS7Intents = main.ONOScli7.intents( jsonFormat=True ) |
| intentCheck = main.FALSE |
| if "Error" in ONOS1Intents or not ONOS1Intents\ |
| or "Error" in ONOS2Intents or not ONOS2Intents\ |
| or "Error" in ONOS3Intents or not ONOS3Intents\ |
| or "Error" in ONOS4Intents or not ONOS4Intents\ |
| or "Error" in ONOS5Intents or not ONOS5Intents\ |
| or "Error" in ONOS6Intents or not ONOS6Intents\ |
| or "Error" in ONOS7Intents or not ONOS7Intents: |
| main.log.report( "Error in getting ONOS intents" ) |
| for i in range( 1, numControllers + 1 ): |
| intents = eval( "ONOS" + str( i ) + "Intents" ) |
| main.log.warn( |
| "ONOS" + str( i ) + " intents response: " + |
| repr( intents ) ) |
| elif ONOS1Intents == ONOS2Intents\ |
| and ONOS1Intents == ONOS3Intents\ |
| and ONOS1Intents == ONOS4Intents\ |
| and ONOS1Intents == ONOS5Intents\ |
| and ONOS1Intents == ONOS6Intents\ |
| and ONOS1Intents == ONOS7Intents: |
| intentState = ONOS1Intents |
| intentCheck = main.TRUE |
| main.log.report( "Intents are consistent across all ONOS nodes" ) |
| else: |
| for i in range( 1, numControllers + 1 ): |
| intents = eval( "ONOS" + str( i ) + "Intents" ) |
| main.log.warn( "ONOS" + str( i ) + " intents: " + |
| json.dumps( json.loads( intents ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=intentCheck, |
| onpass="Intents are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of intents" ) |
| |
| main.step( "Get the flows from each controller" ) |
| global flowState |
| flowState = [] |
| ONOS1Flows = main.ONOScli1.flows( jsonFormat=True ) |
| ONOS2Flows = main.ONOScli2.flows( jsonFormat=True ) |
| ONOS3Flows = main.ONOScli3.flows( jsonFormat=True ) |
| ONOS4Flows = main.ONOScli4.flows( jsonFormat=True ) |
| ONOS5Flows = main.ONOScli5.flows( jsonFormat=True ) |
| ONOS6Flows = main.ONOScli6.flows( jsonFormat=True ) |
| ONOS7Flows = main.ONOScli7.flows( jsonFormat=True ) |
| ONOS1FlowsJson = json.loads( ONOS1Flows ) |
| ONOS2FlowsJson = json.loads( ONOS2Flows ) |
| ONOS3FlowsJson = json.loads( ONOS3Flows ) |
| ONOS4FlowsJson = json.loads( ONOS4Flows ) |
| ONOS5FlowsJson = json.loads( ONOS5Flows ) |
| ONOS6FlowsJson = json.loads( ONOS6Flows ) |
| ONOS7FlowsJson = json.loads( ONOS7Flows ) |
| flowCheck = main.FALSE |
| if "Error" in ONOS1Flows or not ONOS1Flows\ |
| or "Error" in ONOS2Flows or not ONOS2Flows\ |
| or "Error" in ONOS3Flows or not ONOS3Flows\ |
| or "Error" in ONOS4Flows or not ONOS4Flows\ |
| or "Error" in ONOS5Flows or not ONOS5Flows\ |
| or "Error" in ONOS6Flows or not ONOS6Flows\ |
| or "Error" in ONOS7Flows or not ONOS7Flows: |
| main.log.report( "Error in getting ONOS intents" ) |
| for i in range( 1, numControllers + 1 ): |
| flowsIter = eval( "ONOS" + str( i ) + "Flows" ) |
| main.log.warn( "ONOS" + str( i ) + " flows repsponse: " + |
| flowsIter ) |
| elif len( ONOS1FlowsJson ) == len( ONOS2FlowsJson )\ |
| and len( ONOS1FlowsJson ) == len( ONOS3FlowsJson )\ |
| and len( ONOS1FlowsJson ) == len( ONOS4FlowsJson )\ |
| and len( ONOS1FlowsJson ) == len( ONOS5FlowsJson )\ |
| and len( ONOS1FlowsJson ) == len( ONOS6FlowsJson )\ |
| and len( ONOS1FlowsJson ) == len( ONOS7FlowsJson ): |
| # TODO: Do a better check, maybe compare flows on switches? |
| flowState = ONOS1Flows |
| flowCheck = main.TRUE |
| main.log.report( "Flow count is consistent across all ONOS nodes" ) |
| else: |
| for i in range( 1, numControllers + 1 ): |
| flowsJson = eval( "ONOS" + str( i ) + "FlowsJson" ) |
| main.log.warn( "ONOS" + str( i ) + " flows repsponse: " + |
| json.dumps( flowsJson, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=flowCheck, |
| onpass="The flow count is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different flow counts" ) |
| |
| main.step( "Get the OF Table entries" ) |
| global flows |
| flows = [] |
| for i in range( 1, 29 ): |
| flows.append( main.Mininet2.getFlowTable( 1.3, "s" + str( i ) ) ) |
| |
| # TODO: Compare switch flow tables with ONOS flow tables |
| |
| main.step( "Start continuous pings" ) |
| for i in range( 1, 11 ): |
| source = main.params[ 'PING' ][ 'source' + str( i ) ] |
| target = main.params[ 'PING' ][ 'target' + str( i ) ] |
| main.Mininet2.pingLong( |
| src=source, |
| target=target, |
| pingTime=500 ) |
| main.step( "Create TestONTopology object" ) |
| ctrls = [] |
| count = 1 |
| while True: |
| temp = () |
| if ( 'ip' + str( count ) ) in main.params[ 'CTRL' ]: |
| temp = temp + ( getattr( main, ( 'ONOS' + str( count ) ) ), ) |
| temp = temp + ( "ONOS" + str( count ), ) |
| temp = temp + ( main.params[ 'CTRL' ][ 'ip' + str( count ) ], ) |
| temp = temp + \ |
| ( eval( main.params[ 'CTRL' ][ 'port' + str( count ) ] ), ) |
| ctrls.append( temp ) |
| count = count + 1 |
| else: |
| break |
| MNTopo = TestONTopology( |
| main.Mininet1, |
| ctrls ) # can also add Intent API info for intent operations |
| |
| main.step( "Collecting topology information from ONOS" ) |
| # TODO Refactor to a loop? We want all similar calls together? |
| # So get all "devices" as close together as possible |
| devices = [] |
| print "ONOS1" |
| devices.append( main.ONOScli1.devices() ) |
| print "ONOS2" |
| devices.append( main.ONOScli2.devices() ) |
| print "ONOS3" |
| devices.append( main.ONOScli3.devices() ) |
| print "ONOS4" |
| devices.append( main.ONOScli4.devices() ) |
| print "ONOS5" |
| devices.append( main.ONOScli5.devices() ) |
| print "ONOS6" |
| devices.append( main.ONOScli6.devices() ) |
| print "ONOS7" |
| devices.append( main.ONOScli7.devices() ) |
| hosts = [] |
| hosts.append( main.ONOScli1.hosts() ) |
| hosts.append( main.ONOScli2.hosts() ) |
| hosts.append( main.ONOScli3.hosts() ) |
| hosts.append( main.ONOScli4.hosts() ) |
| hosts.append( main.ONOScli5.hosts() ) |
| hosts.append( main.ONOScli6.hosts() ) |
| hosts.append( main.ONOScli7.hosts() ) |
| ports = [] |
| ports.append( main.ONOScli1.ports() ) |
| ports.append( main.ONOScli2.ports() ) |
| ports.append( main.ONOScli3.ports() ) |
| ports.append( main.ONOScli4.ports() ) |
| ports.append( main.ONOScli5.ports() ) |
| ports.append( main.ONOScli6.ports() ) |
| ports.append( main.ONOScli7.ports() ) |
| links = [] |
| links.append( main.ONOScli1.links() ) |
| links.append( main.ONOScli2.links() ) |
| links.append( main.ONOScli3.links() ) |
| links.append( main.ONOScli4.links() ) |
| links.append( main.ONOScli5.links() ) |
| links.append( main.ONOScli6.links() ) |
| links.append( main.ONOScli7.links() ) |
| clusters = [] |
| clusters.append( main.ONOScli1.clusters() ) |
| clusters.append( main.ONOScli2.clusters() ) |
| clusters.append( main.ONOScli3.clusters() ) |
| clusters.append( main.ONOScli4.clusters() ) |
| clusters.append( main.ONOScli5.clusters() ) |
| clusters.append( main.ONOScli6.clusters() ) |
| clusters.append( main.ONOScli7.clusters() ) |
| # Compare json objects for hosts and dataplane clusters |
| |
| # hosts |
| consistentHostsResult = main.TRUE |
| for controller in range( len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| if "Error" not in hosts[ controller ]: |
| if hosts[ controller ] == hosts[ 0 ]: |
| continue |
| else: # hosts not consistent |
| main.log.report( "hosts from ONOS" + |
| controllerStr + |
| " is inconsistent with ONOS1" ) |
| main.log.warn( repr( hosts[ controller ] ) ) |
| consistentHostsResult = main.FALSE |
| |
| else: |
| main.log.report( "Error in getting ONOS hosts from ONOS" + |
| controllerStr ) |
| consistentHostsResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " hosts response: " + |
| repr( hosts[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentHostsResult, |
| onpass="Hosts view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of hosts" ) |
| |
| # Strongly connected clusters of devices |
| consistentClustersResult = main.TRUE |
| for controller in range( len( clusters ) ): |
| if "Error" not in clusters[ controller ]: |
| if clusters[ controller ] == clusters[ 0 ]: |
| continue |
| else: # clusters not consistent |
| main.log.report( "clusters from ONOS" + |
| controllerStr + |
| " is inconsistent with ONOS1" ) |
| consistentClustersResult = main.FALSE |
| |
| else: |
| main.log.report( "Error in getting dataplane clusters " + |
| "from ONOS" + controllerStr ) |
| consistentClustersResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " clusters response: " + |
| repr( clusters[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentClustersResult, |
| onpass="Clusters view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of clusters" ) |
| # there should always only be one cluster |
| numClusters = len( json.loads( clusters[ 0 ] ) ) |
| utilities.assert_equals( |
| expect=1, |
| actual=numClusters, |
| onpass="ONOS shows 1 SCC", |
| onfail="ONOS shows " + |
| str( numClusters ) + |
| " SCCs" ) |
| |
| main.step( "Comparing ONOS topology to MN" ) |
| devicesResults = main.TRUE |
| portsResults = main.TRUE |
| linksResults = main.TRUE |
| for controller in range( numControllers ): |
| controllerStr = str( controller + 1 ) |
| if devices[ controller ] or "Error" not in devices[ controller ]: |
| currentDevicesResult = main.Mininet1.compareSwitches( |
| MNTopo, |
| json.loads( |
| devices[ controller ] ) ) |
| else: |
| currentDevicesResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentDevicesResult, |
| onpass="ONOS" + controllerStr + |
| " Switches view is correct", |
| onfail="ONOS" + controllerStr + |
| " Switches view is incorrect" ) |
| |
| if ports[ controller ] or "Error" not in ports[ controller ]: |
| currentPortsResult = main.Mininet1.comparePorts( |
| MNTopo, |
| json.loads( |
| ports[ controller ] ) ) |
| else: |
| currentPortsResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentPortsResult, |
| onpass="ONOS" + controllerStr + |
| " ports view is correct", |
| onfail="ONOS" + controllerStr + |
| " ports view is incorrect" ) |
| |
| if links[ controller ] or "Error" not in links[ controller ]: |
| currentLinksResult = main.Mininet1.compareLinks( |
| MNTopo, |
| json.loads( |
| links[ controller ] ) ) |
| else: |
| currentLinksResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentLinksResult, |
| onpass="ONOS" + controllerStr + |
| " links view is correct", |
| onfail="ONOS" + controllerStr + |
| " links view is incorrect" ) |
| |
| devicesResults = devicesResults and currentDevicesResult |
| portsResults = portsResults and currentPortsResult |
| linksResults = linksResults and currentLinksResult |
| |
| topoResult = devicesResults and portsResults and linksResults\ |
| and consistentHostsResult and consistentClustersResult |
| utilities.assert_equals( expect=main.TRUE, actual=topoResult, |
| onpass="Topology Check Test successful", |
| onfail="Topology Check Test NOT successful" ) |
| |
| finalAssert = main.TRUE |
| finalAssert = finalAssert and topoResult and flowCheck \ |
| and intentCheck and consistentMastership and rolesNotNull |
| utilities.assert_equals( expect=main.TRUE, actual=finalAssert, |
| onpass="State check successful", |
| onfail="State check NOT successful" ) |
| |
| def CASE6( self, main ): |
| """ |
| The Failure case. We will create IPTables rules here. |
| """ |
| import time |
| main.log.report( "Wait 30 seconds instead of inducing a failure" ) |
| time.sleep( 30 ) |
| |
| # 1 blocks 4,5,6,7, mn |
| # 2 blocks 4,5,6,7, mn |
| # 3 blocks 4,5,6,7, mn |
| # 4 block 1,2,3 |
| # 5 blocks 1,2,3 |
| # 6 blocks 1,2,3 |
| # 7 blocks 1,2,3 |
| |
| # TODO: use new log command |
| logcmd = "log:log \" About to partition the ONOS nodes\"" |
| main.ONOScli1.handle.sendline( logcmd ) |
| main.ONOScli1.handle.expect( "onos>" ) |
| print main.ONOScli1.handle.before |
| main.ONOScli2.handle.sendline( logcmd ) |
| main.ONOScli2.handle.expect( "onos>" ) |
| print main.ONOScli2.handle.before |
| main.ONOScli3.handle.sendline( logcmd ) |
| main.ONOScli3.handle.expect( "onos>" ) |
| print main.ONOScli3.handle.before |
| main.ONOScli4.handle.sendline( logcmd ) |
| main.ONOScli4.handle.expect( "onos>" ) |
| print main.ONOScli4.handle.before |
| main.ONOScli5.handle.sendline( logcmd ) |
| main.ONOScli5.handle.expect( "onos>" ) |
| print main.ONOScli5.handle.before |
| main.ONOScli6.handle.sendline( logcmd ) |
| main.ONOScli6.handle.expect( "onos>" ) |
| print main.ONOScli6.handle.before |
| main.ONOScli7.handle.sendline( logcmd ) |
| main.ONOScli7.handle.expect( "onos>" ) |
| print main.ONOScli7.handle.before |
| |
| nodes = [] |
| #create list of ONOS components |
| for controller in range( 1, numControllers + 1 ): |
| # loop through ONOS handlers |
| node = getattr( main, ( 'ONOS' + str( controller ) ) ) |
| nodes.append( node ) |
| for node in nodes: |
| # if node is in first half (rounded down ) |
| # ( 0 through 2 ) < ( 3.5 - 1) |
| if nodes.index( node ) < ( numControllers / 2.0 - 1 ): |
| # blocked nodes are the last half ( rounded up ) |
| # // is forced integer division |
| for blockNode in nodes[ (numControllers // 2 + 1) * -1: ]: |
| # block all traffic between these ONOS nodes |
| # NOTE: ONOS 1 and 2 don't support state tracking |
| node.setIpTables( blockNode.ip_address, states=False ) |
| node.setIpTables( blockNode.ip_address, |
| direction="OUTPUT" , states=False ) |
| # block traffic between smaller subcluster and Mininet |
| # TODO make OF controller port confgigurable |
| # FIXME Remove this once ONOS can deal with the conflicting |
| # device mastership |
| node.setIpTables( main.Mininet1.ip_address, 6633, |
| packet_type="tcp", states=False ) |
| else: # the larger subcluster |
| # blocked nodes are the first half |
| for blockNode in nodes[ :(numControllers // 2 ) ]: |
| # block all traffic between these ONOS nodes |
| node.setIpTables( blockNode.ip_address ) |
| node.setIpTables( blockNode.ip_address, |
| direction="OUTPUT" ) |
| #FIXME update this |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=main.TRUE, |
| onpass="Sleeping 30 seconds", |
| onfail="Something is terribly wrong with my math" ) |
| main.ONOScli1.handle.sendline( "devices -j" ) |
| main.ONOScli1.handle.expect( ["onos>", "\$"] ) |
| print main.ONOScli1.handle.before |
| main.ONOScli2.handle.sendline( "devices -j" ) |
| main.ONOScli2.handle.expect( ["onos>", "\$"] ) |
| print main.ONOScli2.handle.before |
| main.ONOScli3.handle.sendline( "devices -j" ) |
| main.ONOScli3.handle.expect( ["onos>", "\$"] ) |
| print main.ONOScli3.handle.before |
| main.ONOScli4.handle.sendline( "devices -j" ) |
| main.ONOScli4.handle.expect( ["onos>", "\$"] ) |
| print main.ONOScli4.handle.before |
| main.ONOScli5.handle.sendline( "devices -j" ) |
| main.ONOScli5.handle.expect( ["onos>", "\$"] ) |
| print main.ONOScli5.handle.before |
| main.ONOScli6.handle.sendline( "devices -j" ) |
| main.ONOScli6.handle.expect( ["onos>", "\$"] ) |
| print main.ONOScli6.handle.before |
| main.ONOScli7.handle.sendline( "devices -j" ) |
| main.ONOScli7.handle.expect( ["onos>", "\$"] ) |
| print main.ONOScli7.handle.before |
| time.sleep(100000) |
| |
| |
| def CASE7( self, main ): |
| """ |
| Check state after ONOS failure |
| """ |
| import json |
| main.case( "Running ONOS Constant State Tests" ) |
| |
| # Assert that each device has a master |
| ONOS1MasterNotNull = main.ONOScli1.rolesNotNull() |
| ONOS2MasterNotNull = main.ONOScli2.rolesNotNull() |
| ONOS3MasterNotNull = main.ONOScli3.rolesNotNull() |
| ONOS4MasterNotNull = main.ONOScli4.rolesNotNull() |
| ONOS5MasterNotNull = main.ONOScli5.rolesNotNull() |
| ONOS6MasterNotNull = main.ONOScli6.rolesNotNull() |
| ONOS7MasterNotNull = main.ONOScli7.rolesNotNull() |
| rolesNotNull = ONOS1MasterNotNull and ONOS2MasterNotNull and\ |
| ONOS3MasterNotNull and ONOS4MasterNotNull and\ |
| ONOS5MasterNotNull and ONOS6MasterNotNull and\ |
| ONOS7MasterNotNull |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=rolesNotNull, |
| onpass="Each device has a master", |
| onfail="Some devices don't have a master assigned" ) |
| |
| main.step( "Check if switch roles are consistent across all nodes" ) |
| ONOS1Mastership = main.ONOScli1.roles() |
| ONOS2Mastership = main.ONOScli2.roles() |
| ONOS3Mastership = main.ONOScli3.roles() |
| ONOS4Mastership = main.ONOScli4.roles() |
| ONOS5Mastership = main.ONOScli5.roles() |
| ONOS6Mastership = main.ONOScli6.roles() |
| ONOS7Mastership = main.ONOScli7.roles() |
| if "Error" in ONOS1Mastership or not ONOS1Mastership\ |
| or "Error" in ONOS2Mastership or not ONOS2Mastership\ |
| or "Error" in ONOS3Mastership or not ONOS3Mastership\ |
| or "Error" in ONOS4Mastership or not ONOS4Mastership\ |
| or "Error" in ONOS5Mastership or not ONOS5Mastership\ |
| or "Error" in ONOS6Mastership or not ONOS6Mastership\ |
| or "Error" in ONOS7Mastership or not ONOS7Mastership: |
| main.log.error( "Error in getting ONOS mastership" ) |
| main.log.warn( "ONOS1 mastership response: " + |
| repr( ONOS1Mastership ) ) |
| main.log.warn( "ONOS2 mastership response: " + |
| repr( ONOS2Mastership ) ) |
| main.log.warn( "ONOS3 mastership response: " + |
| repr( ONOS3Mastership ) ) |
| main.log.warn( "ONOS4 mastership response: " + |
| repr( ONOS4Mastership ) ) |
| main.log.warn( "ONOS5 mastership response: " + |
| repr( ONOS5Mastership ) ) |
| main.log.warn( "ONOS6 mastership response: " + |
| repr( ONOS6Mastership ) ) |
| main.log.warn( "ONOS7 mastership response: " + |
| repr( ONOS7Mastership ) ) |
| consistentMastership = main.FALSE |
| elif ONOS1Mastership == ONOS2Mastership\ |
| and ONOS1Mastership == ONOS3Mastership\ |
| and ONOS1Mastership == ONOS4Mastership\ |
| and ONOS1Mastership == ONOS5Mastership\ |
| and ONOS1Mastership == ONOS6Mastership\ |
| and ONOS1Mastership == ONOS7Mastership: |
| consistentMastership = main.TRUE |
| main.log.report( |
| "Switch roles are consistent across all ONOS nodes" ) |
| else: |
| for i in range( 1, numControllers + 1 ): |
| mastership = eval( "ONOS" + str( i ) + "Mastership" ) |
| main.log.warn( "ONOS" + str( i ) + " roles: " + |
| json.dumps( json.loads( mastership ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| consistentMastership = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentMastership, |
| onpass="Switch roles are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of switch roles" ) |
| |
| description2 = "Compare switch roles from before failure" |
| main.step( description2 ) |
| |
| currentJson = json.loads( ONOS1Mastership ) |
| oldJson = json.loads( mastershipState ) |
| mastershipCheck = main.TRUE |
| for i in range( 1, 29 ): |
| switchDPID = str( |
| main.Mininet1.getSwitchDPID( switch="s" + str( i ) ) ) |
| |
| current = [ switch[ 'master' ] for switch in currentJson |
| if switchDPID in switch[ 'id' ] ] |
| old = [ switch[ 'master' ] for switch in oldJson |
| if switchDPID in switch[ 'id' ] ] |
| if current == old: |
| mastershipCheck = mastershipCheck and main.TRUE |
| else: |
| main.log.warn( "Mastership of switch %s changed" % switchDPID ) |
| mastershipCheck = main.FALSE |
| if mastershipCheck == main.TRUE: |
| main.log.report( "Mastership of Switches was not changed" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=mastershipCheck, |
| onpass="Mastership of Switches was not changed", |
| onfail="Mastership of some switches changed" ) |
| mastershipCheck = mastershipCheck and consistentMastership |
| |
| main.step( "Get the intents and compare across all nodes" ) |
| ONOS1Intents = main.ONOScli1.intents( jsonFormat=True ) |
| ONOS2Intents = main.ONOScli2.intents( jsonFormat=True ) |
| ONOS3Intents = main.ONOScli3.intents( jsonFormat=True ) |
| ONOS4Intents = main.ONOScli4.intents( jsonFormat=True ) |
| ONOS5Intents = main.ONOScli5.intents( jsonFormat=True ) |
| ONOS6Intents = main.ONOScli6.intents( jsonFormat=True ) |
| ONOS7Intents = main.ONOScli7.intents( jsonFormat=True ) |
| intentCheck = main.FALSE |
| if "Error" in ONOS1Intents or not ONOS1Intents\ |
| or "Error" in ONOS2Intents or not ONOS2Intents\ |
| or "Error" in ONOS3Intents or not ONOS3Intents\ |
| or "Error" in ONOS4Intents or not ONOS4Intents\ |
| or "Error" in ONOS5Intents or not ONOS5Intents\ |
| or "Error" in ONOS6Intents or not ONOS6Intents\ |
| or "Error" in ONOS7Intents or not ONOS7Intents: |
| main.log.report( "Error in getting ONOS intents" ) |
| main.log.warn( "ONOS1 intents response: " + repr( ONOS1Intents ) ) |
| main.log.warn( "ONOS2 intents response: " + repr( ONOS2Intents ) ) |
| main.log.warn( "ONOS3 intents response: " + repr( ONOS3Intents ) ) |
| main.log.warn( "ONOS4 intents response: " + repr( ONOS4Intents ) ) |
| main.log.warn( "ONOS5 intents response: " + repr( ONOS5Intents ) ) |
| main.log.warn( "ONOS6 intents response: " + repr( ONOS6Intents ) ) |
| main.log.warn( "ONOS7 intents response: " + repr( ONOS7Intents ) ) |
| elif ONOS1Intents == ONOS2Intents\ |
| and ONOS1Intents == ONOS3Intents\ |
| and ONOS1Intents == ONOS4Intents\ |
| and ONOS1Intents == ONOS5Intents\ |
| and ONOS1Intents == ONOS6Intents\ |
| and ONOS1Intents == ONOS7Intents: |
| intentCheck = main.TRUE |
| main.log.report( "Intents are consistent across all ONOS nodes" ) |
| else: |
| for i in range( 1, numControllers + 1 ): |
| intents = eval( "ONOS" + str( i ) + "Intents" ) |
| main.log.warn( "ONOS" + str( i ) + " intents: " + |
| json.dumps( json.loads( ONOS1Intents ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=intentCheck, |
| onpass="Intents are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of intents" ) |
| # Print the intent states |
| intents = [] |
| intents.append( ONOS1Intents ) |
| intents.append( ONOS2Intents ) |
| intents.append( ONOS3Intents ) |
| intents.append( ONOS4Intents ) |
| intents.append( ONOS5Intents ) |
| intents.append( ONOS6Intents ) |
| intents.append( ONOS7Intents ) |
| intentStates = [] |
| for node in intents: # Iter through ONOS nodes |
| nodeStates = [] |
| for intent in json.loads( node ): # Iter through intents of a node |
| nodeStates.append( intent[ 'state' ] ) |
| intentStates.append( nodeStates ) |
| out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ] |
| main.log.info( dict( out ) ) |
| # NOTE: Hazelcast has no durability, so intents are lost across system |
| # restarts |
| main.step( "Compare current intents with intents before the failure" ) |
| # NOTE: this requires case 5 to pass for intentState to be set. |
| # maybe we should stop the test if that fails? |
| sameIntents = main.TRUE |
| if intentState and intentState == ONOS1Intents: |
| sameIntents = main.TRUE |
| main.log.report( "Intents are consistent with before failure" ) |
| # TODO: possibly the states have changed? we may need to figure out |
| # what the aceptable states are |
| else: |
| try: |
| main.log.warn( "ONOS1 intents: " ) |
| print json.dumps( json.loads( ONOS1Intents ), |
| sort_keys=True, indent=4, |
| separators=( ',', ': ' ) ) |
| except: |
| pass |
| sameIntents = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=sameIntents, |
| onpass="Intents are consistent with before failure", |
| onfail="The Intents changed during failure" ) |
| intentCheck = intentCheck and sameIntents |
| |
| main.step( "Get the OF Table entries and compare to before " + |
| "component failure" ) |
| FlowTables = main.TRUE |
| flows2 = [] |
| for i in range( 28 ): |
| main.log.info( "Checking flow table on s" + str( i + 1 ) ) |
| tmpFlows = main.Mininet2.getFlowTable( 1.3, "s" + str( i + 1 ) ) |
| flows2.append( tmpFlows ) |
| tempResult = main.Mininet2.flowComp( |
| flow1=flows[ i ], |
| flow2=tmpFlows ) |
| FlowTables = FlowTables and tempResult |
| if FlowTables == main.FALSE: |
| main.log.info( "Differences in flow table for switch: s" + |
| str( i + 1 ) ) |
| if FlowTables == main.TRUE: |
| main.log.report( "No changes were found in the flow tables" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=FlowTables, |
| onpass="No changes were found in the flow tables", |
| onfail="Changes were found in the flow tables" ) |
| |
| main.step( "Check the continuous pings to ensure that no packets " + |
| "were dropped during component failure" ) |
| # FIXME: This check is always failing. Investigate cause |
| # NOTE: this may be something to do with file permsissions |
| # or slight change in format |
| main.Mininet2.pingKill( |
| main.params[ 'TESTONUSER' ], |
| main.params[ 'TESTONIP' ] ) |
| LossInPings = main.FALSE |
| # NOTE: checkForLoss returns main.FALSE with 0% packet loss |
| for i in range( 8, 18 ): |
| main.log.info( |
| "Checking for a loss in pings along flow from s" + |
| str( i ) ) |
| LossInPings = main.Mininet2.checkForLoss( |
| "/tmp/ping.h" + |
| str( i ) ) or LossInPings |
| if LossInPings == main.TRUE: |
| main.log.info( "Loss in ping detected" ) |
| elif LossInPings == main.ERROR: |
| main.log.info( "There are multiple mininet process running" ) |
| elif LossInPings == main.FALSE: |
| main.log.info( "No Loss in the pings" ) |
| main.log.report( "No loss of dataplane connectivity" ) |
| utilities.assert_equals( |
| expect=main.FALSE, |
| actual=LossInPings, |
| onpass="No Loss of connectivity", |
| onfail="Loss of dataplane connectivity detected" ) |
| |
| # Test of LeadershipElection |
| # FIXME Update this for network partition case |
| # NOTE: this only works for the sanity test. In case of failures, |
| # leader will likely change |
| leader = ONOS1Ip |
| leaderResult = main.TRUE |
| for controller in range( 1, numControllers + 1 ): |
| # loop through ONOScli handlers |
| node = getattr( main, ( 'ONOScli' + str( controller ) ) ) |
| leaderN = node.electionTestLeader() |
| # verify leader is ONOS1 |
| if leaderN == leader: |
| # all is well |
| # NOTE: In failure scenario, this could be a new node, maybe |
| # check != ONOS1 |
| pass |
| elif leaderN == main.FALSE: |
| # error in response |
| main.log.report( "Something is wrong with " + |
| "electionTestLeader function," + |
| " check the error logs" ) |
| leaderResult = main.FALSE |
| elif leader != leaderN: |
| leaderResult = main.FALSE |
| main.log.report( "ONOS" + str( controller ) + " sees " + |
| str( leaderN ) + |
| " as the leader of the election app. " + |
| "Leader should be " + str( leader ) ) |
| if leaderResult: |
| main.log.report( "Leadership election tests passed( consistent " + |
| "view of leader across listeners and a new " + |
| "leader was re-elected if applicable )" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| result = mastershipCheck and intentCheck and FlowTables and\ |
| ( not LossInPings ) and rolesNotNull and leaderResult |
| result = int( result ) |
| if result == main.TRUE: |
| main.log.report( "Constant State Tests Passed" ) |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="Constant State Tests Passed", |
| onfail="Constant state tests failed" ) |
| |
| def CASE8( self, main ): |
| """ |
| Compare topo |
| """ |
| import sys |
| # FIXME add this path to params |
| sys.path.append( "/home/admin/sts" ) |
| # assumes that sts is already in you PYTHONPATH |
| from sts.topology.teston_topology import TestONTopology |
| import json |
| import time |
| |
| description = "Compare ONOS Topology view to Mininet topology" |
| main.case( description ) |
| main.log.report( description ) |
| main.step( "Create TestONTopology object" ) |
| ctrls = [] |
| count = 1 |
| while True: |
| temp = () |
| if ( 'ip' + str( count ) ) in main.params[ 'CTRL' ]: |
| temp = temp + ( getattr( main, ( 'ONOS' + str( count ) ) ), ) |
| temp = temp + ( "ONOS" + str( count ), ) |
| temp = temp + ( main.params[ 'CTRL' ][ 'ip' + str( count ) ], ) |
| temp = temp + \ |
| ( eval( main.params[ 'CTRL' ][ 'port' + str( count ) ] ), ) |
| ctrls.append( temp ) |
| count = count + 1 |
| else: |
| break |
| MNTopo = TestONTopology( |
| main.Mininet1, |
| ctrls ) # can also add Intent API info for intent operations |
| |
| main.step( "Comparing ONOS topology to MN" ) |
| devicesResults = main.TRUE |
| portsResults = main.TRUE |
| linksResults = main.TRUE |
| topoResult = main.FALSE |
| elapsed = 0 |
| count = 0 |
| main.step( "Collecting topology information from ONOS" ) |
| startTime = time.time() |
| # Give time for Gossip to work |
| while topoResult == main.FALSE and elapsed < 60: |
| count = count + 1 |
| if count > 1: |
| # TODO: Depricate STS usage |
| MNTopo = TestONTopology( |
| main.Mininet1, |
| ctrls ) |
| cliStart = time.time() |
| devices = [] |
| devices.append( main.ONOScli1.devices() ) |
| devices.append( main.ONOScli2.devices() ) |
| devices.append( main.ONOScli3.devices() ) |
| devices.append( main.ONOScli4.devices() ) |
| devices.append( main.ONOScli5.devices() ) |
| devices.append( main.ONOScli6.devices() ) |
| devices.append( main.ONOScli7.devices() ) |
| hosts = [] |
| hosts.append( json.loads( main.ONOScli1.hosts() ) ) |
| hosts.append( json.loads( main.ONOScli2.hosts() ) ) |
| hosts.append( json.loads( main.ONOScli3.hosts() ) ) |
| hosts.append( json.loads( main.ONOScli4.hosts() ) ) |
| hosts.append( json.loads( main.ONOScli5.hosts() ) ) |
| hosts.append( json.loads( main.ONOScli6.hosts() ) ) |
| hosts.append( json.loads( main.ONOScli7.hosts() ) ) |
| for controller in range( 0, len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| for host in hosts[ controller ]: |
| if host[ 'ips' ] == []: |
| main.log.error( |
| "DEBUG:Error with host ips on controller" + |
| controllerStr + ": " + str( host ) ) |
| ports = [] |
| ports.append( main.ONOScli1.ports() ) |
| ports.append( main.ONOScli2.ports() ) |
| ports.append( main.ONOScli3.ports() ) |
| ports.append( main.ONOScli4.ports() ) |
| ports.append( main.ONOScli5.ports() ) |
| ports.append( main.ONOScli6.ports() ) |
| ports.append( main.ONOScli7.ports() ) |
| links = [] |
| links.append( main.ONOScli1.links() ) |
| links.append( main.ONOScli2.links() ) |
| links.append( main.ONOScli3.links() ) |
| links.append( main.ONOScli4.links() ) |
| links.append( main.ONOScli5.links() ) |
| links.append( main.ONOScli6.links() ) |
| links.append( main.ONOScli7.links() ) |
| clusters = [] |
| clusters.append( main.ONOScli1.clusters() ) |
| clusters.append( main.ONOScli2.clusters() ) |
| clusters.append( main.ONOScli3.clusters() ) |
| clusters.append( main.ONOScli4.clusters() ) |
| clusters.append( main.ONOScli5.clusters() ) |
| clusters.append( main.ONOScli6.clusters() ) |
| clusters.append( main.ONOScli7.clusters() ) |
| |
| elapsed = time.time() - startTime |
| cliTime = time.time() - cliStart |
| print "CLI time: " + str( cliTime ) |
| |
| for controller in range( numControllers ): |
| controllerStr = str( controller + 1 ) |
| if devices[ controller ] or "Error" not in devices[ |
| controller ]: |
| currentDevicesResult = main.Mininet1.compareSwitches( |
| MNTopo, |
| json.loads( |
| devices[ controller ] ) ) |
| else: |
| currentDevicesResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentDevicesResult, |
| onpass="ONOS" + controllerStr + |
| " Switches view is correct", |
| onfail="ONOS" + controllerStr + |
| " Switches view is incorrect" ) |
| |
| if ports[ controller ] or "Error" not in ports[ controller ]: |
| currentPortsResult = main.Mininet1.comparePorts( |
| MNTopo, |
| json.loads( |
| ports[ controller ] ) ) |
| else: |
| currentPortsResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentPortsResult, |
| onpass="ONOS" + controllerStr + |
| " ports view is correct", |
| onfail="ONOS" + controllerStr + |
| " ports view is incorrect" ) |
| |
| if links[ controller ] or "Error" not in links[ controller ]: |
| currentLinksResult = main.Mininet1.compareLinks( |
| MNTopo, |
| json.loads( |
| links[ controller ] ) ) |
| else: |
| currentLinksResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentLinksResult, |
| onpass="ONOS" + controllerStr + |
| " links view is correct", |
| onfail="ONOS" + controllerStr + |
| " links view is incorrect" ) |
| devicesResults = devicesResults and currentDevicesResult |
| portsResults = portsResults and currentPortsResult |
| linksResults = linksResults and currentLinksResult |
| |
| # Compare json objects for hosts and dataplane clusters |
| |
| # hosts |
| consistentHostsResult = main.TRUE |
| for controller in range( len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| if "Error" not in hosts[ controller ]: |
| if hosts[ controller ] == hosts[ 0 ]: |
| continue |
| else: # hosts not consistent |
| main.log.report( "hosts from ONOS" + controllerStr + |
| " is inconsistent with ONOS1" ) |
| main.log.warn( repr( hosts[ controller ] ) ) |
| consistentHostsResult = main.FALSE |
| |
| else: |
| main.log.report( "Error in getting ONOS hosts from ONOS" + |
| controllerStr ) |
| consistentHostsResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " hosts response: " + |
| repr( hosts[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentHostsResult, |
| onpass="Hosts view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of hosts" ) |
| |
| # Strongly connected clusters of devices |
| consistentClustersResult = main.TRUE |
| for controller in range( len( clusters ) ): |
| controllerStr = str( controller + 1 ) |
| if "Error" not in clusters[ controller ]: |
| if clusters[ controller ] == clusters[ 0 ]: |
| continue |
| else: # clusters not consistent |
| main.log.report( "clusters from ONOS" + |
| controllerStr + |
| " is inconsistent with ONOS1" ) |
| consistentClustersResult = main.FALSE |
| |
| else: |
| main.log.report( "Error in getting dataplane clusters " + |
| "from ONOS" + controllerStr ) |
| consistentClustersResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " clusters response: " + |
| repr( clusters[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentClustersResult, |
| onpass="Clusters view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of clusters" ) |
| # there should always only be one cluster |
| numClusters = len( json.loads( clusters[ 0 ] ) ) |
| utilities.assert_equals( |
| expect=1, |
| actual=numClusters, |
| onpass="ONOS shows 1 SCC", |
| onfail="ONOS shows " + |
| str( numClusters ) + |
| " SCCs" ) |
| |
| topoResult = ( devicesResults and portsResults and linksResults |
| and consistentHostsResult |
| and consistentClustersResult ) |
| |
| topoResult = topoResult and int( count <= 2 ) |
| note = "note it takes about " + str( int( cliTime ) ) + \ |
| " seconds for the test to make all the cli calls to fetch " +\ |
| "the topology from each ONOS instance" |
| main.log.info( |
| "Very crass estimate for topology discovery/convergence( " + |
| str( note ) + " ): " + str( elapsed ) + " seconds, " + |
| str( count ) + " tries" ) |
| utilities.assert_equals( expect=main.TRUE, actual=topoResult, |
| onpass="Topology Check Test successful", |
| onfail="Topology Check Test NOT successful" ) |
| if topoResult == main.TRUE: |
| main.log.report( "ONOS topology view matches Mininet topology" ) |
| |
| def CASE9( self, main ): |
| """ |
| Link s3-s28 down |
| """ |
| import time |
| # NOTE: You should probably run a topology check after this |
| |
| linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| |
| description = "Turn off a link to ensure that Link Discovery " +\ |
| "is working properly" |
| main.log.report( description ) |
| main.case( description ) |
| |
| main.step( "Kill Link between s3 and s28" ) |
| LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" ) |
| main.log.info( |
| "Waiting " + |
| str( linkSleep ) + |
| " seconds for link down to be discovered" ) |
| time.sleep( linkSleep ) |
| utilities.assert_equals( expect=main.TRUE, actual=LinkDown, |
| onpass="Link down succesful", |
| onfail="Failed to bring link down" ) |
| # TODO do some sort of check here |
| |
| def CASE10( self, main ): |
| """ |
| Link s3-s28 up |
| """ |
| import time |
| # NOTE: You should probably run a topology check after this |
| |
| linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| |
| description = "Restore a link to ensure that Link Discovery is " + \ |
| "working properly" |
| main.log.report( description ) |
| main.case( description ) |
| |
| main.step( "Bring link between s3 and s28 back up" ) |
| LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" ) |
| main.log.info( |
| "Waiting " + |
| str( linkSleep ) + |
| " seconds for link up to be discovered" ) |
| time.sleep( linkSleep ) |
| utilities.assert_equals( expect=main.TRUE, actual=LinkUp, |
| onpass="Link up succesful", |
| onfail="Failed to bring link up" ) |
| # TODO do some sort of check here |
| |
| def CASE11( self, main ): |
| """ |
| Switch Down |
| """ |
| # NOTE: You should probably run a topology check after this |
| import time |
| |
| switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| |
| description = "Killing a switch to ensure it is discovered correctly" |
| main.log.report( description ) |
| main.case( description ) |
| switch = main.params[ 'kill' ][ 'switch' ] |
| switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| |
| # TODO: Make this switch parameterizable |
| main.step( "Kill " + switch ) |
| main.log.report( "Deleting " + switch ) |
| main.Mininet1.delSwitch( switch ) |
| main.log.info( "Waiting " + str( switchSleep ) + |
| " seconds for switch down to be discovered" ) |
| time.sleep( switchSleep ) |
| device = main.ONOScli1.getDevice( dpid=switchDPID ) |
| # Peek at the deleted switch |
| main.log.warn( str( device ) ) |
| result = main.FALSE |
| if device and device[ 'available' ] is False: |
| result = main.TRUE |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="Kill switch succesful", |
| onfail="Failed to kill switch?" ) |
| |
| def CASE12( self, main ): |
| """ |
| Switch Up |
| """ |
| # NOTE: You should probably run a topology check after this |
| import time |
| |
| switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| switch = main.params[ 'kill' ][ 'switch' ] |
| switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| links = main.params[ 'kill' ][ 'links' ].split() |
| description = "Adding a switch to ensure it is discovered correctly" |
| main.log.report( description ) |
| main.case( description ) |
| |
| main.step( "Add back " + switch ) |
| main.log.report( "Adding back " + switch ) |
| main.Mininet1.addSwitch( switch, dpid=switchDPID ) |
| for peer in links: |
| main.Mininet1.addLink( switch, peer ) |
| main.Mininet1.assignSwController( |
| sw=switch.split( 's' )[ 1 ], |
| count=numControllers, |
| ip1=ONOS1Ip, |
| port1=ONOS1Port, |
| ip2=ONOS2Ip, |
| port2=ONOS2Port, |
| ip3=ONOS3Ip, |
| port3=ONOS3Port, |
| ip4=ONOS4Ip, |
| port4=ONOS4Port, |
| ip5=ONOS5Ip, |
| port5=ONOS5Port, |
| ip6=ONOS6Ip, |
| port6=ONOS6Port, |
| ip7=ONOS7Ip, |
| port7=ONOS7Port ) |
| main.log.info( |
| "Waiting " + |
| str( switchSleep ) + |
| " seconds for switch up to be discovered" ) |
| time.sleep( switchSleep ) |
| device = main.ONOScli1.getDevice( dpid=switchDPID ) |
| # Peek at the deleted switch |
| main.log.warn( str( device ) ) |
| result = main.FALSE |
| if device and device[ 'available' ]: |
| result = main.TRUE |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="add switch succesful", |
| onfail="Failed to add switch?" ) |
| |
| def CASE13( self, main ): |
| """ |
| Clean up |
| """ |
| import os |
| import time |
| # TODO: make use of this elsewhere |
| ips = [] |
| ips.append( ONOS1Ip ) |
| ips.append( ONOS2Ip ) |
| ips.append( ONOS3Ip ) |
| ips.append( ONOS4Ip ) |
| ips.append( ONOS5Ip ) |
| ips.append( ONOS6Ip ) |
| ips.append( ONOS7Ip ) |
| |
| # printing colors to terminal |
| colors = {} |
| colors[ 'cyan' ] = '\033[96m' |
| colors[ 'purple' ] = '\033[95m' |
| colors[ 'blue' ] = '\033[94m' |
| colors[ 'green' ] = '\033[92m' |
| colors[ 'yellow' ] = '\033[93m' |
| colors[ 'red' ] = '\033[91m' |
| colors[ 'end' ] = '\033[0m' |
| description = "Test Cleanup" |
| main.log.report( description ) |
| main.case( description ) |
| main.step( "Killing tcpdumps" ) |
| main.Mininet2.stopTcpdump() |
| |
| main.step( "Checking ONOS Logs for errors" ) |
| for i in range( 7 ): |
| print colors[ 'purple' ] + "Checking logs for errors on " + \ |
| "ONOS" + str( i + 1 ) + ":" + colors[ 'end' ] |
| print main.ONOSbench.checkLogs( ips[ i ] ) |
| |
| main.step( "Copying MN pcap and ONOS log files to test station" ) |
| testname = main.TEST |
| teststationUser = main.params[ 'TESTONUSER' ] |
| teststationIP = main.params[ 'TESTONIP' ] |
| # NOTE: MN Pcap file is being saved to ~/packet_captures |
| # scp this file as MN and TestON aren't necessarily the same vm |
| # FIXME: scp |
| # mn files |
| # TODO: Load these from params |
| # NOTE: must end in / |
| logFolder = "/opt/onos/log/" |
| logFiles = [ "karaf.log", "karaf.log.1" ] |
| # NOTE: must end in / |
| dstDir = "~/packet_captures/" |
| for f in logFiles: |
| for i in range( 7 ): |
| main.ONOSbench.handle.sendline( "scp sdn@" + ips[ i ] + ":" + |
| logFolder + f + " " + |
| teststationUser + "@" + |
| teststationIP + ":" + |
| dstDir + str( testname ) + |
| "-ONOS" + str( i + 1 ) + "-" + |
| f ) |
| # std*.log's |
| # NOTE: must end in / |
| logFolder = "/opt/onos/var/" |
| logFiles = [ "stderr.log", "stdout.log" ] |
| # NOTE: must end in / |
| dstDir = "~/packet_captures/" |
| for f in logFiles: |
| for i in range( 7 ): |
| main.ONOSbench.handle.sendline( "scp sdn@" + ips[ i ] + ":" + |
| logFolder + f + " " + |
| teststationUser + "@" + |
| teststationIP + ":" + |
| dstDir + str( testname ) + |
| "-ONOS" + str( i + 1 ) + "-" + |
| f ) |
| # sleep so scp can finish |
| time.sleep( 10 ) |
| main.step( "Packing and rotating pcap archives" ) |
| os.system( "~/TestON/dependencies/rotate.sh " + str( testname ) ) |
| |
| # TODO: actually check something here |
| utilities.assert_equals( expect=main.TRUE, actual=main.TRUE, |
| onpass="Test cleanup successful", |
| onfail="Test cleanup NOT successful" ) |
| |
| def CASE14( self, main ): |
| """ |
| start election app on all onos nodes |
| """ |
| leaderResult = main.TRUE |
| # install app on onos 1 |
| main.log.info( "Install leadership election app" ) |
| main.ONOScli1.featureInstall( "onos-app-election" ) |
| # wait for election |
| # check for leader |
| leader = main.ONOScli1.electionTestLeader() |
| # verify leader is ONOS1 |
| if leader == ONOS1Ip: |
| # all is well |
| pass |
| elif leader is None: |
| # No leader elected |
| main.log.report( "No leader was elected" ) |
| leaderResult = main.FALSE |
| elif leader == main.FALSE: |
| # error in response |
| # TODO: add check for "Command not found:" in the driver, this |
| # means the app isn't loaded |
| main.log.report( "Something is wrong with electionTestLeader" + |
| " function, check the error logs" ) |
| leaderResult = main.FALSE |
| else: |
| # error in response |
| main.log.report( |
| "Unexpected response from electionTestLeader function:'" + |
| str( leader ) + |
| "'" ) |
| leaderResult = main.FALSE |
| |
| # install on other nodes and check for leader. |
| # Should be onos1 and each app should show the same leader |
| for controller in range( 2, numControllers + 1 ): |
| # loop through ONOScli handlers |
| node = getattr( main, ( 'ONOScli' + str( controller ) ) ) |
| node.featureInstall( "onos-app-election" ) |
| leaderN = node.electionTestLeader() |
| # verify leader is ONOS1 |
| if leaderN == ONOS1Ip: |
| # all is well |
| pass |
| elif leaderN == main.FALSE: |
| # error in response |
| # TODO: add check for "Command not found:" in the driver, this |
| # means the app isn't loaded |
| main.log.report( "Something is wrong with " + |
| "electionTestLeader function, check the" + |
| " error logs" ) |
| leaderResult = main.FALSE |
| elif leader != leaderN: |
| leaderResult = main.FALSE |
| main.log.report( "ONOS" + str( controller ) + " sees " + |
| str( leaderN ) + |
| " as the leader of the election app. Leader" + |
| " should be " + |
| str( leader ) ) |
| if leaderResult: |
| main.log.report( "Leadership election tests passed( consistent " + |
| "view of leader across listeners and a leader " + |
| "was elected )" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| def CASE15( self, main ): |
| """ |
| Check that Leadership Election is still functional |
| """ |
| leaderResult = main.TRUE |
| description = "Check that Leadership Election is still functional" |
| main.log.report( description ) |
| main.case( description ) |
| main.step( "Find current leader and withdraw" ) |
| leader = main.ONOScli1.electionTestLeader() |
| withdrawResult = main.FALSE |
| if leader == ONOS1Ip: |
| oldLeader = getattr( main, "ONOScli1" ) |
| elif leader == ONOS2Ip: |
| oldLeader = getattr( main, "ONOScli2" ) |
| elif leader == ONOS3Ip: |
| oldLeader = getattr( main, "ONOScli3" ) |
| elif leader == ONOS4Ip: |
| oldLeader = getattr( main, "ONOScli4" ) |
| elif leader == ONOS5Ip: |
| oldLeader = getattr( main, "ONOScli5" ) |
| elif leader == ONOS6Ip: |
| oldLeader = getattr( main, "ONOScli6" ) |
| elif leader == ONOS7Ip: |
| oldLeader = getattr( main, "ONOScli7" ) |
| elif leader is None or leader == main.FALSE: |
| main.log.report( |
| "Leader for the election app should be an ONOS node," + |
| "instead got '" + |
| str( leader ) + |
| "'" ) |
| leaderResult = main.FALSE |
| withdrawResult = oldLeader.electionTestWithdraw() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=withdrawResult, |
| onpass="App was withdrawn from election", |
| onfail="App was not withdrawn from election" ) |
| |
| main.step( "Make sure new leader is elected" ) |
| leaderList = [] |
| for controller in range( 1, numControllers + 1 ): |
| # loop through ONOScli handlers |
| node = getattr( main, ( 'ONOScli' + str( controller ) ) ) |
| leaderList.append( node.electionTestLeader() ) |
| for leaderN in leaderList: |
| if leaderN == leader: |
| main.log.report( |
| "ONOS" + |
| str( controller ) + |
| " still sees " + |
| str( leader ) + |
| " as leader after they withdrew" ) |
| leaderResult = main.FALSE |
| elif leaderN == main.FALSE: |
| # error in response |
| # TODO: add check for "Command not found:" in the driver, this |
| # means the app isn't loaded |
| main.log.report( "Something is wrong with " + |
| "electionTestLeader function, " + |
| "check the error logs" ) |
| leaderResult = main.FALSE |
| consistentLeader = main.FALSE |
| if len( set( leaderList ) ) == 1: |
| main.log.info( "Each Election-app sees '" + |
| str( leaderList[ 0 ] ) + |
| "' as the leader" ) |
| consistentLeader = main.TRUE |
| else: |
| main.log.report( |
| "Inconsistent responses for leader of Election-app:" ) |
| for n in range( len( leaderList ) ): |
| main.log.report( "ONOS" + str( n + 1 ) + " response: " + |
| str( leaderList[ n ] ) ) |
| if leaderResult: |
| main.log.report( "Leadership election tests passed( consistent " + |
| "view of leader across listeners and a new " + |
| "leader was elected when the old leader " + |
| "resigned )" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| main.step( "Run for election on old leader( just so everyone " |
| "is in the hat )" ) |
| runResult = oldLeader.electionTestRun() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=runResult, |
| onpass="App re-ran for election", |
| onfail="App failed to run for election" ) |
| if consistentLeader == main.TRUE: |
| afterRun = main.ONOScli1.electionTestLeader() |
| # verify leader didn't just change |
| if afterRun == leaderList[ 0 ]: |
| leaderResult = main.TRUE |
| else: |
| leaderResult = main.FALSE |
| # TODO: assert on run and withdraw results? |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election after " + |
| "the old leader re-ran for election" ) |
| def CASE16( self ): |
| """ |
| """ |
| main.ONOScli1.handle.sendline( "sudo iptables -F" ) |
| main.ONOScli1.handle.expect( "\$" ) |
| main.ONOScli2.handle.sendline( "sudo iptables -F" ) |
| main.ONOScli2.handle.expect( "\$" ) |
| main.ONOScli3.handle.sendline( "sudo iptables -F" ) |
| main.ONOScli3.handle.expect( "\$" ) |
| main.ONOScli4.handle.sendline( "sudo iptables -F" ) |
| main.ONOScli4.handle.expect( "\$" ) |
| main.ONOScli5.handle.sendline( "sudo iptables -F" ) |
| main.ONOScli5.handle.expect( "\$" ) |
| main.ONOScli6.handle.sendline( "sudo iptables -F" ) |
| main.ONOScli6.handle.expect( "\$" ) |
| main.ONOScli7.handle.sendline( "sudo iptables -F" ) |
| main.ONOScli7.handle.expect( "\$" ) |
| |