| class scaleONOS7nodes : |
| |
| |
| |
| def __init__(self) : |
| self.default = '' |
| |
| # def print_hello_world(self,main): |
| # print("hello world") |
| #***************************************************************************************************************************************************************************************** |
| #Test startup |
| #Tests the startup of Zookeeper1, RamCloud1, and ONOS1 to be certain that all started up successfully |
| def CASE1(self,main) : #Check to be sure ZK, Cass, and ONOS are up, then get ONOS version |
| main.case("Initial setup") |
| main.step("Stop ONOS") |
| import time |
| main.log.info("Stopping all ONOS nodes...") |
| main.ONOS1.stop_all() |
| main.ONOS2.stop_all() |
| main.ONOS3.stop_all() |
| # main.print_hello_world() |
| main.ONOS4.stop_all() |
| main.ONOS5.stop_all() |
| main.ONOS6.stop_all() |
| main.ONOS7.stop_all() |
| #main.ONOS2.stop_rest() |
| time.sleep(5) |
| #main.ONOS1.handle.sendline("cp ~/onos.properties.proactive ~/ONOS/conf/onos.properties") |
| #main.ONOS2.handle.sendline("cp ~/onos.properties.proactive ~/ONOS/conf/onos.properties") |
| #main.ONOS3.handle.sendline("cp ~/onos.properties.proactive ~/ONOS/conf/onos.properties") |
| #main.ONOS4.handle.sendline("cp ~/onos.properties.proactive ~/ONOS/conf/onos.properties") |
| #main.step("Start tcpdump on mn") |
| #main.Mininet2.start_tcpdump(main.params['tcpdump']['filename'], intf = main.params['tcpdump']['intf'], port = main.params['tcpdump']['port']) |
| main.step("Starting 3 ONOS nodes...") |
| main.Zookeeper1.start() |
| main.Zookeeper2.start() |
| main.Zookeeper3.start() |
| main.Zookeeper4.start() |
| main.Zookeeper5.start() |
| main.Zookeeper6.start() |
| main.Zookeeper7.start() |
| |
| time.sleep(5) |
| |
| |
| main.RamCloud1.del_db() |
| main.RamCloud2.del_db() |
| main.RamCloud3.del_db() |
| # main.RamCloud4.del_db() |
| |
| time.sleep(5) |
| #main.log.report("Pulling latest code from github to all nodes") |
| |
| """ |
| for i in range(2): |
| uptodate = main.ONOS1.git_pull() |
| main.ONOS2.git_pull() |
| main.ONOS3.git_pull() |
| # main.ONOS4.git_pull() |
| ver1 = main.ONOS1.get_version() |
| ver2 = main.ONOS3.get_version() |
| if ver1==ver2: |
| break |
| elif i==1: |
| main.ONOS2.git_pull("ONOS1 master") |
| main.ONOS3.git_pull("ONOS1 master") |
| # main.ONOS4.git_pull("ONOS1 master") |
| if uptodate==0: |
| # if 1: |
| main.ONOS1.git_compile() |
| main.ONOS2.git_compile() |
| main.ONOS3.git_compile() |
| # main.ONOS4.git_compile() |
| main.ONOS1.print_version() |
| # main.RamCloud1.git_pull() |
| # main.RamCloud2.git_pull() |
| # main.RamCloud3.git_pull() |
| # main.RamCloud4.git_pull() |
| # main.ONOS1.get_version() |
| # main.ONOS2.get_version() |
| # main.ONOS3.get_version() |
| # main.ONOS4.get_version() |
| # main.ONOS1.start_all() |
| # main.ONOS2.start_all() |
| # main.ONOS3.start_all() |
| # main.ONOS4.start_all() |
| |
| """ |
| main.RamCloud1.start_coor() |
| main.RamCloud1.start_serv() |
| main.RamCloud2.start_serv() |
| main.RamCloud3.start_serv() |
| time.sleep(5) |
| main.ONOS1.start() |
| main.ONOS2.start() |
| main.ONOS3.start() |
| #main.ONOS4.start() |
| time.sleep(5) |
| |
| #main.ONOS1.handle.sendline("./onos.sh core start") |
| #main.ONOS1.handle.sendline("./onos.sh core start") |
| #main.ONOS1.handle.sendline("./onos.sh core start") |
| |
| main.ONOS1.start_rest() |
| main.ONOS2.start_rest() |
| main.ONOS3.start_rest() |
| test= main.ONOS2.rest_status() |
| if test == main.FALSE: |
| main.ONOS1.start_rest() |
| main.ONOS1.get_version() |
| main.log.report("Startup check Zookeeper1, RamCloud1, and ONOS1 connections") |
| main.step("Testing startup Zookeeper") |
| data = main.Zookeeper1.isup() and main.Zookeeper2.isup() and main.Zookeeper3.isup() |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="Zookeeper is up!",onfail="Zookeeper is down...") |
| |
| main.step("Testing startup RamCloud") |
| data = main.RamCloud1.status_serv() and main.RamCloud2.status_serv() and main.RamCloud3.status_serv() #and main.RamCloud4.status_serv() |
| if data == main.FALSE: |
| main.RamCloud1.stop_coor() |
| main.RamCloud1.stop_serv() |
| main.RamCloud2.stop_serv() |
| main.RamCloud3.stop_serv() |
| # main.RamCloud4.stop_serv() |
| |
| time.sleep(5) |
| main.RamCloud1.start_coor() |
| main.RamCloud1.start_serv() |
| main.RamCloud2.start_serv() |
| main.RamCloud3.start_serv() |
| # main.RamCloud4.start_serv() |
| time.sleep(5) |
| data = main.RamCloud1.status_serv() and main.RamCloud2.status_serv() and main.RamCloud3.status_serv() #and main.RamCloud4.status_serv() |
| |
| |
| |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="RamCloud is up!",onfail="RamCloud is down...") |
| |
| main.step("Testing startup ONOS") |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() #and main.ONOS4.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() #and main.ONOS4.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| time.sleep(10) |
| |
| |
| def CASE31(self,main): |
| main.case("Staring SB load with 3 ONOS nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| rate1 = main.params['RATE1'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int( main.params['loop']) |
| port = main.params['port'] |
| switches_num = main.params['switches_num'] |
| print loop |
| sleep_init = int(main.params['sleep_init']) |
| sleep_t =int( main.params['sleep_t']) |
| main.case("Starting SB load on 3 nodes from mininet with " + rate1 +" added/removed/s for " + run_dur) |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate1 + " -d " + rate1 + " -l " + run_dur) |
| main.log.info("Adding switches and ports.....") |
| main.Mininet2.handle.expect("Starting SB load....", timeout=400) |
| main.log.info("Starting SB load....") |
| import time |
| import json |
| time.sleep(sleep_init) |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale3nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale3nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,4): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| main.Mininet2.handle.expect("\$", timeout=900) |
| # main.Mininet2.handle.sendline("sudo mn -c") |
| #main.Mininet2.handle.expect("\$") |
| # main.Mininet2.handle.expect("\$", timeout=900) |
| time.sleep(180) |
| |
| |
| def CASE32(self,main): |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| import time |
| rate2 = main.params['RATE2'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int(main.params['loop']) |
| sleep_init = int(main.params['sleep_init']) |
| sleep_t = int(main.params['sleep_t']) |
| port = main.params['port'] |
| switches_num = main.params['switches_num'] |
| main.case("Starting SB load on 3 nodes from mininet with " + rate2 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + "\"" + " " + switches_num + " " + port + " " + rate2 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate2 + " -d " + rate2 + " -l " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"10.128.10.1\" 100 50 1200 \"11\"") |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900 ) |
| time.sleep(sleep_init ) |
| import json |
| time.sleep(sleep_init) |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale3nodesrate2", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale3nodesrate2", "a") |
| for i in range(int (loop)): |
| j1 = main.ONOS1.get_json(url1) |
| j2 = main.ONOS1.get_json(url2) |
| j3 = main.ONOS1.get_json(url3) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,4): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| #time.sleep(10) |
| main.Mininet2.handle.expect("\$", timeout=900) |
| time.sleep(180) |
| # main.Mininet2.handle.sendline("sudo mn -c") |
| #time.sleep(5) |
| # main.Mininet2.handle.expect("\$", timeout=900) |
| |
| |
| def CASE33(self,main): |
| |
| main.case("Starting NB Throughput test") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| import time |
| import json |
| |
| main.Mininet4.handle.expect("\$") |
| #main.Mininet2.handle.sendline("sudo mn --custom topo-intentTPtest.py --topo mytopo --mac --arp") |
| #main.Mininet2.handle.expect("mininet>" , timeout=400) |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s1 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s2 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s3 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s4 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s5 tcp:10.128.10.3:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s6 tcp:10.128.10.3:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s7 tcp:10.128.10.3:6633") |
| |
| main.ONOS3.handle.sendline("cd ~admin/suibin-dev") |
| main.ONOS3.handle.expect("\$") |
| |
| main.ONOS3.handle.sendline("./loadgen_NB.py -n 3 -u \"10.128.10.1:8080 10.128.10.2:8080 10.128.10.3:8080 \" -i 10 -a 10 -l 60 -p 20") |
| main.ONOS3.handle.expect("Pause between add and delete:", timeout=900) |
| |
| time.sleep(60) |
| import json |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale3nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale3nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(8): |
| j1 = main.ONOS1.get_json(url1) |
| j2 = main.ONOS1.get_json(url2) |
| j3 = main.ONOS1.get_json(url3) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "": |
| for j in range(1,4): |
| f.write("*****************ONOS" + str(j) + " INCOMING RATE****************************" "\n") |
| f.write(str(json_str[j]["meters"][0]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| |
| f.write("***************** ONOS" + str(j) + " PROCESSING RATE************************" + " \n ") |
| f.write(str(json_str[j]["meters"][1]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['mean_rate'])) |
| f.write('\n') |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| f.write("--------------------------------------------------------------------------------- \n \n") |
| time.sleep(10) |
| f.close() |
| |
| main.ONOS3.handle.expect("\$", timeout=900) |
| |
| |
| def CASE4(self,main): |
| |
| main.case("Starting ONOS scale-up to 4 nodes ") |
| import time |
| # main.RamCloud4.start_serv() |
| main.ONOS5.stop_all() |
| main.ONOS6.stop_all() |
| main.ONOS7.stop_all() |
| |
| |
| main.Zookeeper4.start() |
| time.sleep(5) |
| |
| main.RamCloud4.del_db() |
| time.sleep(3) |
| main.RamCloud4.start_serv() |
| time.sleep(3) |
| main.ONOS4.start() |
| main.ONOS4.start_rest() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| |
| time.sleep(10) |
| |
| def CASE5(self,main): |
| |
| main.case("Starting ONOS scale-up/down to 5 nodes ") |
| import time |
| # main.RamCloud4.start_serv() |
| main.ONOS6.stop_all() |
| main.ONOS7.stop_all() |
| #pdata = main.ONOS5.isup() |
| |
| main.Zookeeper5.start() |
| time.sleep(5) |
| |
| main.RamCloud5.del_db() |
| time.sleep(3) |
| main.RamCloud5.start_serv() |
| time.sleep(3) |
| main.ONOS5.start() |
| main.ONOS5.start_rest() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| time.sleep(10) |
| |
| def CASE6(self,main): |
| |
| main.case("Starting ONOS scale-up/down to 6 nodes ") |
| import time |
| # main.RamCloud4.start_serv() |
| main.ONOS7.stop_all() |
| #pdata = main.ONOS6.isup() |
| |
| main.Zookeeper6.start() |
| time.sleep(5) |
| |
| main.RamCloud6.del_db() |
| time.sleep(3) |
| main.RamCloud6.start_serv() |
| time.sleep(3) |
| main.ONOS6.start() |
| main.ONOS6.start_rest() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() and main.ONOS6.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() and main.ONOS6.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| time.sleep(10) |
| |
| def CASE7(self,main): |
| |
| main.case("Starting ONOS scale-up/down to 7 nodes ") |
| import time |
| # main.RamCloud4.start_serv() |
| #pdata = main.ONOS7.isup() |
| |
| main.Zookeeper7.start() |
| time.sleep(5) |
| |
| main.RamCloud7.del_db() |
| time.sleep(3) |
| main.RamCloud7.start_serv() |
| time.sleep(3) |
| main.ONOS7.start() |
| main.ONOS7.start_rest() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() and main.ONOS6.isup() and main.ONOS7.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() and main.ONOS6.isup() and main.ONOS7.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| time.sleep(10) |
| |
| |
| |
| def CASE41(self,main): |
| main.case("Starting SB test for 4 nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| rate1 = main.params['RATE1'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int( main.params['loop']) |
| switches_num = main.params['switches_num'] |
| port = main.params['port'] |
| print loop |
| sleep_init = int(main.params['sleep_init']) |
| sleep_t =int( main.params['sleep_t']) |
| main.case("Starting SB load on 4 nodes from mininet with " + rate1 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate1 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate1 + " -d " + rate1 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900) |
| import time |
| import json |
| time.sleep(sleep_init) |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale4nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale4nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,5): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| |
| #main.Mininet2.handle.expect("\$", timeout=900) |
| #main.Mininet2.handle.sendline("sudo mn -c") |
| #main.Mininet2.handle.expect("\$") |
| time.sleep(5) |
| main.Mininet2.handle.expect("\$", timeout=900) |
| time.sleep(180) |
| |
| |
| def CASE42(self,main): |
| |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| |
| import time |
| import json |
| rate2 = main.params['RATE2'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int(main.params['loop']) |
| sleep_init = int(main.params['sleep_init']) |
| sleep_t = int(main.params['sleep_t']) |
| switches_num = main.params['switches_num'] |
| port = main.params['port'] |
| main.case("Starting SB load on 4 nodes from mininet with " + rate2 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate2 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate2 + " -d " + rate2 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900 ) |
| time.sleep(sleep_init) |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale4nodesrate2", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale4nodesrate2", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,5): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| time.sleep(180) |
| |
| def CASE43(self,main): |
| |
| main.case("Starting NB Throughput test after scaling up to 4 onos nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| |
| import time |
| import json |
| |
| main.Mininet4.handle.expect("\$") |
| #main.Mininet2.handle.sendline("sudo mn --custom topo-intentTPtest.py --topo mytopo --mac --arp") |
| #main.Mininet2.handle.expect("mininet>" , timeout=400) |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s1 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s2 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s3 tcp:10.128.10.3:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s4 tcp:10.128.10.4:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s5 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s6 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s7 tcp:10.128.10.4:6633") |
| |
| main.ONOS3.handle.sendline("cd ~admin/suibin-dev") |
| main.ONOS3.handle.expect("\$") |
| |
| main.ONOS3.handle.sendline("./multiLoadgen_NB.py -u \"10.128.10.1:8080 10.128.10.2:8080 10.128.10.3:8080 10.128.10.4:8080 \" -i 4 -g 100 -a 1 -d 1 -p 0") |
| main.ONOS3.handle.expect("intent group is : 0", timeout=900) |
| |
| |
| import json |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale4nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale4nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(8): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "": |
| for j in range(1,5): |
| f.write("*****************ONOS" + str(j) + " INCOMING RATE****************************" "\n") |
| f.write(str(json_str[j]["meters"][0]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| |
| f.write("***************** ONOS" + str(j) + " PROCESSING RATE************************" + " \n ") |
| f.write(str(json_str[j]["meters"][1]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['mean_rate'])) |
| f.write('\n') |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| f.write("--------------------------------------------------------------------------------- \n \n") |
| time.sleep(10) |
| f.close() |
| |
| |
| main.ONOS3.handle.expect("\$", timeout=900) |
| |
| |
| def CASE51(self,main): |
| main.case("Starting SB test for 5 nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| ip5 = main.params['CTRL']['ip5'] |
| rate1 = main.params['RATE1'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int( main.params['loop']) |
| switches_num = main.params['switches_num'] |
| port = main.params['port'] |
| print loop |
| sleep_init = int(main.params['sleep_init']) |
| sleep_t =int( main.params['sleep_t']) |
| main.case("Starting SB load on 5 nodes from mininet with " + rate1 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate1 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + " " + ip5 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate1 + " -d " + rate1 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900) |
| import time |
| import json |
| time.sleep(sleep_init) |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale5nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale5nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,6): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| |
| #main.Mininet2.handle.expect("\$", timeout=900) |
| #main.Mininet2.handle.sendline("sudo mn -c") |
| #main.Mininet2.handle.expect("\$") |
| time.sleep(5) |
| main.Mininet2.handle.expect("\$", timeout=900) |
| time.sleep(180) |
| |
| |
| def CASE52(self,main): |
| |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| ip5 = main.params['CTRL']['ip5'] |
| |
| import time |
| import json |
| rate2 = main.params['RATE2'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int(main.params['loop']) |
| sleep_t = int(main.params['sleep_t']) |
| sleep_init = int(main.params['sleep_init']) |
| switches_num = main.params['switches_num'] |
| port = main.params['port'] |
| main.case("Starting SB load on 4 nodes from mininet with " + rate2 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate2 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + " " + ip5 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate2 + " -d " + rate2 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900 ) |
| time.sleep(sleep_init) |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale5nodesrate2", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale5nodesrate2", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[4] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,6): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| time.sleep(180) |
| |
| def CASE53(self,main): |
| |
| main.case("Starting NB Throughput test after scaling up to 4 onos nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| |
| import time |
| import json |
| |
| main.Mininet4.handle.expect("\$") |
| #main.Mininet2.handle.sendline("sudo mn --custom topo-intentTPtest.py --topo mytopo --mac --arp") |
| #main.Mininet2.handle.expect("mininet>" , timeout=400) |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s1 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s2 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s3 tcp:10.128.10.3:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s4 tcp:10.128.10.4:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s5 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s6 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s7 tcp:10.128.10.4:6633") |
| |
| main.ONOS3.handle.sendline("cd ~admin/suibin-dev") |
| main.ONOS3.handle.expect("\$") |
| |
| main.ONOS3.handle.sendline("./multiLoadgen_NB.py -u \"10.128.10.1:8080 10.128.10.2:8080 10.128.10.3:8080 10.128.10.4:8080 \" -i 4 -g 100 -a 1 -d 1 -p 0") |
| main.ONOS3.handle.expect("intent group is : 0", timeout=900) |
| |
| |
| import json |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale5nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale5nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(8): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "": |
| for j in range(1,6): |
| f.write("*****************ONOS" + str(j) + " INCOMING RATE****************************" "\n") |
| f.write(str(json_str[j]["meters"][0]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| |
| f.write("***************** ONOS" + str(j) + " PROCESSING RATE************************" + " \n ") |
| f.write(str(json_str[j]["meters"][1]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['mean_rate'])) |
| f.write('\n') |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| f.write("--------------------------------------------------------------------------------- \n \n") |
| time.sleep(10) |
| f.close() |
| |
| |
| main.ONOS3.handle.expect("\$", timeout=900) |
| |
| def CASE61(self,main): |
| main.case("Starting SB test for 5 nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| ip5 = main.params['CTRL']['ip5'] |
| ip6 = main.params['CTRL']['ip6'] |
| rate1 = main.params['RATE1'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int( main.params['loop']) |
| switches_num = main.params['switches_num'] |
| port = main.params['port'] |
| print loop |
| sleep_t =int( main.params['sleep_t']) |
| sleep_init = int(main.params['sleep_init']) |
| main.case("Starting SB load on 6 nodes from mininet with " + rate1 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate1 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + " " + ip5 + " " + ip6 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate1 + " -d " + rate1 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900) |
| |
| import time |
| import json |
| time.sleep(sleep_init) |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale6nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url6 = "http://10.128.10.6:8080/wm/onos/metrics" |
| |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale6nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| j6 = main.ONOS2.get_json(url6) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| json_str.append(j6) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "" and json_str[6] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,7): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| |
| #main.Mininet2.handle.expect("\$", timeout=900) |
| #main.Mininet2.handle.sendline("sudo mn -c") |
| #main.Mininet2.handle.expect("\$") |
| time.sleep(5) |
| main.Mininet2.handle.expect("\$", timeout=900) |
| time.sleep(180) |
| |
| |
| def CASE62(self,main): |
| |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| ip5 = main.params['CTRL']['ip5'] |
| ip6 = main.params['CTRL']['ip6'] |
| |
| import time |
| import json |
| rate2 = main.params['RATE2'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int(main.params['loop']) |
| sleep_t = int(main.params['sleep_t']) |
| switches_num = main.params['switches_num'] |
| sleep_init = int(main.params['sleep_init']) |
| port = main.params['port'] |
| main.case("Starting SB load on 4 nodes from mininet with " + rate2 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate2 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + " " + ip5 + " " + ip6 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate2 + " -d " + rate2 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900 ) |
| time.sleep(sleep_init) |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale6nodesrate2", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url6 = "http://10.128.10.6:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale6nodesrate2", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| j6 = main.ONOS2.get_json(url6) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| json_str.append(j6) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "" and json_str[6] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,7): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| time.sleep(180) |
| |
| def CASE63(self,main): |
| |
| main.case("Starting NB Throughput test after scaling up to 4 onos nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| |
| import time |
| import json |
| |
| main.Mininet4.handle.expect("\$") |
| #main.Mininet2.handle.sendline("sudo mn --custom topo-intentTPtest.py --topo mytopo --mac --arp") |
| #main.Mininet2.handle.expect("mininet>" , timeout=400) |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s1 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s2 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s3 tcp:10.128.10.3:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s4 tcp:10.128.10.4:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s5 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s6 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s7 tcp:10.128.10.4:6633") |
| |
| main.ONOS3.handle.sendline("cd ~admin/suibin-dev") |
| main.ONOS3.handle.expect("\$") |
| |
| main.ONOS3.handle.sendline("./multiLoadgen_NB.py -u \"10.128.10.1:8080 10.128.10.2:8080 10.128.10.3:8080 10.128.10.4:8080 \" -i 4 -g 100 -a 1 -d 1 -p 0") |
| main.ONOS3.handle.expect("intent group is : 0", timeout=900) |
| |
| |
| import json |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale6nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url6 = "http://10.128.10.6:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale6nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(8): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| j6 = main.ONOS2.get_json(url6) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| json_str.append(j6) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "" and json_str[6] != "": |
| for j in range(1,7): |
| f.write("*****************ONOS" + str(j) + " INCOMING RATE****************************" "\n") |
| f.write(str(json_str[j]["meters"][0]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| |
| f.write("***************** ONOS" + str(j) + " PROCESSING RATE************************" + " \n ") |
| f.write(str(json_str[j]["meters"][1]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['mean_rate'])) |
| f.write('\n') |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| f.write("--------------------------------------------------------------------------------- \n \n") |
| time.sleep(10) |
| f.close() |
| |
| |
| main.ONOS3.handle.expect("\$", timeout=900) |
| |
| def CASE71(self,main): |
| main.case("Starting SB test for 7 nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| ip5 = main.params['CTRL']['ip5'] |
| ip6 = main.params['CTRL']['ip6'] |
| ip7 = main.params['CTRL']['ip7'] |
| rate1 = main.params['RATE1'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int( main.params['loop']) |
| switches_num = main.params['switches_num'] |
| port = main.params['port'] |
| print loop |
| sleep_t =int( main.params['sleep_t']) |
| sleep_init = int(main.params['sleep_init']) |
| main.case("Starting SB load on 6 nodes from mininet with " + rate1 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate1 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + " " + ip5 + " " + ip6 + " " + ip7 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate1 + " -d " + rate1 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900) |
| import time |
| import json |
| time.sleep(sleep_init) |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale7nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url6 = "http://10.128.10.6:8080/wm/onos/metrics" |
| url7 = "http://10.128.10.7:8080/wm/onos/metrics" |
| |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale7nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| j6 = main.ONOS2.get_json(url6) |
| j7 = main.ONOS2.get_json(url7) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| json_str.append(j6) |
| json_str.append(j7) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "" and json_str[6] != "" and json_str[7] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,8): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| |
| #main.Mininet2.handle.expect("\$", timeout=900) |
| #main.Mininet2.handle.sendline("sudo mn -c") |
| #main.Mininet2.handle.expect("\$") |
| time.sleep(5) |
| main.Mininet2.handle.expect("\$", timeout=900) |
| time.sleep(180) |
| |
| |
| def CASE72(self,main): |
| |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| ip5 = main.params['CTRL']['ip5'] |
| ip6 = main.params['CTRL']['ip6'] |
| ip7 = main.params['CTRL']['ip7'] |
| |
| import time |
| import json |
| rate2 = main.params['RATE2'] |
| run_dur = main.params['RUN_DUR'] |
| loop = int(main.params['loop']) |
| sleep_t = int(main.params['sleep_t']) |
| sleep_init = int(main.params['sleep_init']) |
| switches_num = main.params['switches_num'] |
| port = main.params['port'] |
| main.case("Starting SB load on 7 nodes from mininet with " + rate2 +" added/removed/s for " + run_dur) |
| #main.Mininet2.handle.sendline("./loadgen_SB.sh startload \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + "\"" + " " + switches_num + " " + port + " " + rate2 + " " + run_dur + " \"11\"") |
| main.Mininet2.handle.sendline("sudo ./loadgen_SB.py -u \"" + ip1 + " " + ip2 + " " + ip3 + " " + ip4 + " " + ip5 + " " + ip6 + " " + ip7 + "\"" + " -s " + switches_num + " -p " + port + " -a " + rate2 + " -d " + rate2 + " -l " + run_dur) |
| main.Mininet2.handle.expect("Starting SB load....", timeout=900 ) |
| |
| time.sleep(sleep_init) |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale7nodesrate2", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url6 = "http://10.128.10.6:8080/wm/onos/metrics" |
| url7 = "http://10.128.10.7:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/scale6nodesrate2", "a") |
| #time.sleep(10) |
| for i in range(int (loop)): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| j6 = main.ONOS2.get_json(url6) |
| j7 = main.ONOS2.get_json(url7) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| json_str.append(j6) |
| json_str.append(j7) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "" and json_str[6] != "" and json_str[7] != "": |
| # write_str = str(json_str["meters"][4]["meter"][2]) |
| #print str(json_str["meters"][4]) |
| #f.write(str(json_str["meters"][4])) |
| #f.write('\n') |
| #time.sleep(3) |
| for j in range(1,8): |
| f.write("ONOS" + str(j) + "\n") |
| f.write(str(json_str[j]["meters"][4]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][4]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| time.sleep(sleep_t) |
| f.close() |
| time.sleep(180) |
| |
| def CASE73(self,main): |
| |
| main.case("Starting NB Throughput test after scaling up to 4 onos nodes") |
| ip1 = main.params['CTRL']['ip1'] |
| ip2 = main.params['CTRL']['ip2'] |
| ip3 = main.params['CTRL']['ip3'] |
| ip4 = main.params['CTRL']['ip4'] |
| |
| import time |
| import json |
| |
| main.Mininet4.handle.expect("\$") |
| #main.Mininet2.handle.sendline("sudo mn --custom topo-intentTPtest.py --topo mytopo --mac --arp") |
| #main.Mininet2.handle.expect("mininet>" , timeout=400) |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s1 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s2 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s3 tcp:10.128.10.3:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s4 tcp:10.128.10.4:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s5 tcp:10.128.10.1:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s6 tcp:10.128.10.2:6633") |
| main.Mininet4.handle.sendline("sudo ovs-vsctl set-controller s7 tcp:10.128.10.4:6633") |
| |
| main.ONOS3.handle.sendline("cd ~admin/suibin-dev") |
| main.ONOS3.handle.expect("\$") |
| |
| main.ONOS3.handle.sendline("./multiLoadgen_NB.py -u \"10.128.10.1:8080 10.128.10.2:8080 10.128.10.3:8080 10.128.10.4:8080 \" -i 4 -g 100 -a 1 -d 1 -p 0") |
| main.ONOS3.handle.expect("intent group is : 0", timeout=900) |
| |
| |
| import json |
| |
| open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale7nodesrate1", 'w').close() |
| url1 = "http://10.128.10.1:8080/wm/onos/metrics" |
| url2 = "http://10.128.10.2:8080/wm/onos/metrics" |
| url3 = "http://10.128.10.3:8080/wm/onos/metrics" |
| url4 = "http://10.128.10.4:8080/wm/onos/metrics" |
| url5 = "http://10.128.10.5:8080/wm/onos/metrics" |
| url6 = "http://10.128.10.6:8080/wm/onos/metrics" |
| url7 = "http://10.128.10.7:8080/wm/onos/metrics" |
| f = open("/home/admin/TestON/tests/scaleONOS7nodes/logs/NBscale7nodesrate1", "a") |
| #time.sleep(10) |
| for i in range(8): |
| j1 = main.ONOS2.get_json(url1) |
| j2 = main.ONOS2.get_json(url2) |
| j3 = main.ONOS2.get_json(url3) |
| j4 = main.ONOS2.get_json(url4) |
| j5 = main.ONOS2.get_json(url5) |
| j6 = main.ONOS2.get_json(url6) |
| j7 = main.ONOS2.get_json(url7) |
| json_str = [] |
| json_str.append(0) |
| json_str.append(j1) |
| json_str.append(j2) |
| json_str.append(j3) |
| json_str.append(j4) |
| json_str.append(j5) |
| json_str.append(j6) |
| json_str.append(j7) |
| if json_str[1] != "" and json_str[2] != "" and json_str[3] != "" and json_str[4] != "" and json_str[5] != "" and json_str[6] != "" and json_str[6] != "": |
| for j in range(1,8): |
| f.write("*****************ONOS" + str(j) + " INCOMING RATE****************************" "\n") |
| f.write(str(json_str[j]["meters"][0]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][0]['meter']['mean_rate'])) |
| f.write('\n') |
| |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| |
| f.write("***************** ONOS" + str(j) + " PROCESSING RATE************************" + " \n ") |
| f.write(str(json_str[j]["meters"][1]['meter']['count'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m1_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m5_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['m15_rate'])) |
| f.write('\t') |
| f.write(str(json_str[j]["meters"][1]['meter']['mean_rate'])) |
| f.write('\n') |
| f.write('\n') |
| f.write('\n') |
| |
| f.write("--------------------------------------------------------------------------------- \n") |
| f.write("--------------------------------------------------------------------------------- \n \n") |
| time.sleep(10) |
| f.close() |
| |
| |
| main.ONOS3.handle.expect("\$", timeout=900) |
| |
| def CASE8(self,main): |
| import time |
| main.case("Scaling ONOS down to 6 ONOS instances") |
| main.ONOS7.stop_all() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() and main.ONOS6.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() and main.ONOS6.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| |
| def CASE9(self,main): |
| |
| main.case("Scaling ONOS down to 5 ONOS instances") |
| main.ONOS6.stop_all() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() and main.ONOS5.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| |
| def CASE10(self,main): |
| |
| main.case("Scaling ONOS down to 4 ONOS instances") |
| main.ONOS5.stop_all() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() and main.ONOS4.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| |
| def CASE11(self,main): |
| |
| main.case("Scaling ONOS down to 3 ONOS instances") |
| main.ONOS4.stop_all() |
| time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() |
| for i in range(3): |
| if data == main.FALSE: |
| #main.log.report("Something is funny... restarting ONOS") |
| #main.ONOS1.stop() |
| time.sleep(3) |
| #main.ONOS1.start() |
| #time.sleep(5) |
| data = main.ONOS1.isup() and main.ONOS2.isup() and main.ONOS3.isup() |
| else: |
| break |
| utilities.assert_equals(expect=main.TRUE,actual=data,onpass="ONOS is up and running!",onfail="ONOS didn't start...") |
| |
| def CASE100(self,main): |
| import os |
| import time |
| global timestr |
| timestr = time.strftime("%Y%m%d-%H%M%S") |
| main.case("Scale-up tests complete...now making final changes") |
| main.log.info("moving logs....") |
| os.system("sudo mkdir ~admin/TestON/tests/scaleONOS7nodes/logs/ONOSscale_up" + timestr + "") |
| time.sleep(2) |
| os.system("sudo cp ~admin/TestON/tests/scaleONOS7nodes/logs/*scale* ~admin/TestON/tests/scaleONOS7nodes/logs/ONOSscale_up" + timestr + "") |
| time.sleep(2) |
| os.system("sudo rm ~admin/TestON/tests/scaleONOS7nodes/logs/*") |
| time.sleep(2) |
| |
| def CASE101(self,main): |
| |
| import os |
| import time |
| main.case("Scale-down tests complete...now making final changes") |
| global timestr |
| main.case("Scale-down tests complete...now making final changes") |
| main.log.info("moving logs....") |
| os.system("sudo mkdir ~admin/TestON/tests/scaleONOS7nodes/logs/ONOSscale_dwn" + timestr + "") |
| time.sleep(2) |
| os.system("sudo cp ~admin/TestON/tests/scaleONOS7nodes/logs/*scale* ~admin/TestON/tests/scaleONOS7nodes/logs/ONOSscale_dwn" + timestr + "") |
| time.sleep(2) |
| os.system("sudo rm ~admin/TestON/tests/scaleONOS7nodes/logs/*") |
| time.sleep(2) |
| |
| |