| """ |
| Description: This test is to determine if a single |
| instance ONOS 'cluster' can handle a restart |
| |
| List of test cases: |
| CASE1: Compile ONOS and push it to the test machines |
| CASE2: Assign devices to controllers |
| CASE21: Assign mastership to controllers |
| CASE3: Assign intents |
| CASE4: Ping across added host intents |
| CASE5: Reading state of ONOS |
| CASE6: The Failure case. |
| CASE7: Check state after control plane failure |
| CASE8: Compare topo |
| CASE9: Link s3-s28 down |
| CASE10: Link s3-s28 up |
| CASE11: Switch down |
| CASE12: Switch up |
| CASE13: Clean up |
| CASE14: start election app on all onos nodes |
| CASE15: Check that Leadership Election is still functional |
| CASE16: Install Distributed Primitives app |
| CASE17: Check for basic functionality with distributed primitives |
| """ |
| |
| |
| class HATestSingleInstanceRestart: |
| |
| def __init__( self ): |
| self.default = '' |
| |
| def CASE1( self, main ): |
| """ |
| CASE1 is to compile ONOS and push it to the test machines |
| |
| Startup sequence: |
| cell <name> |
| onos-verify-cell |
| NOTE: temporary - onos-remove-raft-logs |
| onos-uninstall |
| start mininet |
| git pull |
| mvn clean install |
| onos-package |
| onos-install -f |
| onos-wait-for-start |
| start cli sessions |
| start tcpdump |
| """ |
| main.log.info( "ONOS Single node cluster restart " + |
| "HA test - initialization" ) |
| main.case( "Setting up test environment" ) |
| main.caseExplaination = "Setup the test environment including " +\ |
| "installing ONOS, starting Mininet and ONOS" +\ |
| "cli sessions." |
| # TODO: save all the timers and output them for plotting |
| |
| # load some variables from the params file |
| PULLCODE = False |
| if main.params[ 'Git' ] == 'True': |
| PULLCODE = True |
| gitBranch = main.params[ 'branch' ] |
| cellName = main.params[ 'ENV' ][ 'cellName' ] |
| |
| # set global variables |
| global ONOS1Ip |
| global ONOS1Port |
| global ONOS2Port |
| global ONOS3Port |
| global ONOS4Port |
| global ONOS5Port |
| global ONOS6Port |
| global ONOS7Port |
| global numControllers |
| numControllers = int( main.params[ 'num_controllers' ] ) |
| |
| ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ] |
| ONOS1Port = main.params[ 'CTRL' ][ 'port1' ] |
| ONOS2Port = main.params[ 'CTRL' ][ 'port2' ] |
| ONOS3Port = main.params[ 'CTRL' ][ 'port3' ] |
| ONOS4Port = main.params[ 'CTRL' ][ 'port4' ] |
| ONOS5Port = main.params[ 'CTRL' ][ 'port5' ] |
| ONOS6Port = main.params[ 'CTRL' ][ 'port6' ] |
| ONOS7Port = main.params[ 'CTRL' ][ 'port7' ] |
| |
| global CLIs |
| CLIs = [] |
| global nodes |
| nodes = [] |
| for i in range( 1, numControllers + 1 ): |
| CLIs.append( getattr( main, 'ONOScli' + str( i ) ) ) |
| nodes.append( getattr( main, 'ONOS' + str( i ) ) ) |
| |
| main.step( "Applying cell variable to environment" ) |
| cellResult = main.ONOSbench.setCell( cellName ) |
| verifyResult = main.ONOSbench.verifyCell() |
| |
| # FIXME:this is short term fix |
| main.log.info( "Removing raft logs" ) |
| main.ONOSbench.onosRemoveRaftLogs() |
| |
| main.log.info( "Uninstalling ONOS" ) |
| for node in nodes: |
| main.ONOSbench.onosUninstall( node.ip_address ) |
| |
| # Make sure ONOS is DEAD |
| main.log.info( "Killing any ONOS processes" ) |
| killResults = main.TRUE |
| for node in nodes: |
| killed = main.ONOSbench.onosKill( node.ip_address ) |
| killResults = killResults and killed |
| |
| cleanInstallResult = main.TRUE |
| gitPullResult = main.TRUE |
| |
| main.step( "Starting Mininet" ) |
| mnResult = main.Mininet1.startNet( ) |
| utilities.assert_equals( expect=main.TRUE, actual=mnResult, |
| onpass="Mininet Started", |
| onfail="Error starting Mininet" ) |
| |
| main.step( "Git checkout and pull " + gitBranch ) |
| if PULLCODE: |
| main.ONOSbench.gitCheckout( gitBranch ) |
| gitPullResult = main.ONOSbench.gitPull() |
| # values of 1 or 3 are good |
| utilities.assert_lesser( expect=0, actual=gitPullResult, |
| onpass="Git pull successful", |
| onfail="Git pull failed" ) |
| main.ONOSbench.getVersion( report=True ) |
| |
| main.step( "Using mvn clean install" ) |
| cleanInstallResult = main.TRUE |
| if PULLCODE and gitPullResult == main.TRUE: |
| cleanInstallResult = main.ONOSbench.cleanInstall() |
| else: |
| main.log.warn( "Did not pull new code so skipping mvn " + |
| "clean install" ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=cleanInstallResult, |
| onpass="MCI successful", |
| onfail="MCI failed" ) |
| # GRAPHS |
| # NOTE: important params here: |
| # job = name of Jenkins job |
| # Plot Name = Plot-HA, only can be used if multiple plots |
| # index = The number of the graph under plot name |
| job = "HASingleInstanceRestart" |
| plotName = "Plot-HA" |
| graphs = '<ac:structured-macro ac:name="html">\n' |
| graphs += '<ac:plain-text-body><![CDATA[\n' |
| graphs += '<iframe src="https://onos-jenkins.onlab.us/job/' + job +\ |
| '/plot/' + plotName + '/getPlot?index=0' +\ |
| '&width=500&height=300"' +\ |
| 'noborder="0" width="500" height="300" scrolling="yes" ' +\ |
| 'seamless="seamless"></iframe>\n' |
| graphs += ']]></ac:plain-text-body>\n' |
| graphs += '</ac:structured-macro>\n' |
| main.log.wiki(graphs) |
| |
| cellResult = main.ONOSbench.setCell( "SingleHA" ) |
| verifyResult = main.ONOSbench.verifyCell() |
| main.step( "Creating ONOS package" ) |
| packageResult = main.ONOSbench.onosPackage() |
| utilities.assert_equals( expect=main.TRUE, actual=packageResult, |
| onpass="ONOS package successful", |
| onfail="ONOS package failed" ) |
| |
| main.step( "Installing ONOS package" ) |
| onosInstallResult = main.ONOSbench.onosInstall( options="-f", |
| node=ONOS1Ip ) |
| utilities.assert_equals( expect=main.TRUE, actual=onosInstallResult, |
| onpass="ONOS install successful", |
| onfail="ONOS install failed" ) |
| |
| main.step( "Checking if ONOS is up yet" ) |
| for i in range( 2 ): |
| onos1Isup = main.ONOSbench.isup( ONOS1Ip ) |
| if onos1Isup: |
| break |
| utilities.assert_equals( expect=main.TRUE, actual=onos1Isup, |
| onpass="ONOS startup successful", |
| onfail="ONOS startup failed" ) |
| |
| main.log.step( "Starting ONOS CLI sessions" ) |
| cliResults = main.ONOScli1.startOnosCli( ONOS1Ip ) |
| utilities.assert_equals( expect=main.TRUE, actual=cliResults, |
| onpass="ONOS cli startup successful", |
| onfail="ONOS cli startup failed" ) |
| |
| if main.params[ 'tcpdump' ].lower() == "true": |
| main.step( "Start Packet Capture MN" ) |
| main.Mininet2.startTcpdump( |
| str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST ) |
| + "-MN.pcap", |
| intf=main.params[ 'MNtcpdump' ][ 'intf' ], |
| port=main.params[ 'MNtcpdump' ][ 'port' ] ) |
| |
| main.step( "App Ids check" ) |
| appCheck = main.ONOScli1.appToIDCheck() |
| if appCheck != main.TRUE: |
| main.log.warn( CLIs[0].apps() ) |
| main.log.warn( CLIs[0].appIDs() ) |
| utilities.assert_equals( expect=main.TRUE, actual=appCheck, |
| onpass="App Ids seem to be correct", |
| onfail="Something is wrong with app Ids" ) |
| |
| if cliResults == main.FALSE: |
| main.log.error( "Failed to start ONOS, stopping test" ) |
| main.cleanup() |
| main.exit() |
| |
| def CASE2( self, main ): |
| """ |
| Assign devices to controllers |
| """ |
| import re |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert ONOS1Port, "ONOS1Port not defined" |
| assert ONOS2Port, "ONOS2Port not defined" |
| assert ONOS3Port, "ONOS3Port not defined" |
| assert ONOS4Port, "ONOS4Port not defined" |
| assert ONOS5Port, "ONOS5Port not defined" |
| assert ONOS6Port, "ONOS6Port not defined" |
| assert ONOS7Port, "ONOS7Port not defined" |
| |
| main.case( "Assigning devices to controllers" ) |
| main.caseExplaination = "Assign switches to ONOS using 'ovs-vsctl' " +\ |
| "and check that an ONOS node becomes the " +\ |
| "master of the device." |
| main.step( "Assign switches to controllers" ) |
| |
| for i in range( 1, 29 ): |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| ip1=ONOS1Ip, port1=ONOS1Port ) |
| |
| mastershipCheck = main.TRUE |
| for i in range( 1, 29 ): |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| try: |
| main.log.info( str( response ) ) |
| except Exception: |
| main.log.info( repr( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response ): |
| mastershipCheck = mastershipCheck and main.TRUE |
| else: |
| mastershipCheck = main.FALSE |
| if mastershipCheck == main.TRUE: |
| main.log.info( "Switch mastership assigned correctly" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=mastershipCheck, |
| onpass="Switch mastership assigned correctly", |
| onfail="Switches not assigned correctly to controllers" ) |
| |
| def CASE21( self, main ): |
| """ |
| Assign mastership to controllers |
| """ |
| import re |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert CLIs, "CLIs not defined" |
| assert nodes, "nodes not defined" |
| assert ONOS1Port, "ONOS1Port not defined" |
| assert ONOS2Port, "ONOS2Port not defined" |
| assert ONOS3Port, "ONOS3Port not defined" |
| assert ONOS4Port, "ONOS4Port not defined" |
| assert ONOS5Port, "ONOS5Port not defined" |
| assert ONOS6Port, "ONOS6Port not defined" |
| assert ONOS7Port, "ONOS7Port not defined" |
| |
| main.case( "Assigning Controller roles for switches" ) |
| main.caseExplaination = "Check that ONOS is connected to each " +\ |
| "device. Then manually assign" +\ |
| " mastership to specific ONOS nodes using" +\ |
| " 'device-role'" |
| main.step( "Assign mastership of switches to specific controllers" ) |
| roleCall = main.TRUE |
| roleCheck = main.TRUE |
| try: |
| for i in range( 1, 29 ): # switches 1 through 28 |
| ip = nodes[ 0 ].ip_address # ONOS1 |
| # set up correct variables: |
| if i == 1: |
| deviceId = main.ONOScli1.getDevice( "1000" ).get( 'id' ) |
| elif i == 2: |
| deviceId = main.ONOScli1.getDevice( "2000" ).get( 'id' ) |
| elif i == 3: |
| deviceId = main.ONOScli1.getDevice( "3000" ).get( 'id' ) |
| elif i == 4: |
| deviceId = main.ONOScli1.getDevice( "3004" ).get( 'id' ) |
| elif i == 5: |
| deviceId = main.ONOScli1.getDevice( "5000" ).get( 'id' ) |
| elif i == 6: |
| deviceId = main.ONOScli1.getDevice( "6000" ).get( 'id' ) |
| elif i == 7: |
| deviceId = main.ONOScli1.getDevice( "6007" ).get( 'id' ) |
| elif i >= 8 and i <= 17: |
| dpid = '3' + str( i ).zfill( 3 ) |
| deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' ) |
| elif i >= 18 and i <= 27: |
| dpid = '6' + str( i ).zfill( 3 ) |
| deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' ) |
| elif i == 28: |
| deviceId = main.ONOScli1.getDevice( "2800" ).get( 'id' ) |
| else: |
| main.log.error( "You didn't write an else statement for " + |
| "switch s" + str( i ) ) |
| # Assign switch |
| assert deviceId, "No device id for s" + str( i ) + " in ONOS" |
| # TODO: make this controller dynamic |
| roleCall = roleCall and main.ONOScli1.deviceRole( deviceId, |
| ip ) |
| # Check assignment |
| master = main.ONOScli1.getRole( deviceId ).get( 'master' ) |
| if ip in master: |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| main.log.error( "Error, controller " + ip + " is not" + |
| " master " + "of device " + |
| str( deviceId ) + ". Master is " + |
| repr( master ) + "." ) |
| except ( AttributeError, AssertionError ): |
| main.log.exception( "Something is wrong with ONOS device view" ) |
| main.log.info( main.ONOScli1.devices() ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=roleCall, |
| onpass="Re-assigned switch mastership to designated controller", |
| onfail="Something wrong with deviceRole calls" ) |
| |
| main.step( "Check mastership was correctly assigned" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=roleCheck, |
| onpass="Switches were successfully reassigned to designated " + |
| "controller", |
| onfail="Switches were not successfully reassigned" ) |
| |
| def CASE3( self, main ): |
| """ |
| Assign intents |
| """ |
| import time |
| import json |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| # NOTE: we must reinstall intents until we have a persistant intent |
| # datastore! |
| main.case( "Adding host Intents" ) |
| main.caseExplaination = "Discover hosts by using pingall then " +\ |
| "assign predetermined host-to-host intents." +\ |
| " After installation, check that the intent" +\ |
| " is distributed to all nodes and the state" +\ |
| " is INSTALLED" |
| |
| # install onos-app-fwd |
| main.step( "Install reactive forwarding app" ) |
| installResults = CLIs[0].activateApp( "org.onosproject.fwd" ) |
| utilities.assert_equals( expect=main.TRUE, actual=installResults, |
| onpass="Install fwd successful", |
| onfail="Install fwd failed" ) |
| |
| main.step( "Check app ids" ) |
| appCheck = main.ONOScli1.appToIDCheck() |
| if appCheck != main.TRUE: |
| main.log.warn( CLIs[0].apps() ) |
| main.log.warn( CLIs[0].appIDs() ) |
| utilities.assert_equals( expect=main.TRUE, actual=appCheck, |
| onpass="App Ids seem to be correct", |
| onfail="Something is wrong with app Ids" ) |
| |
| main.step( "Discovering Hosts( Via pingall for now )" ) |
| # FIXME: Once we have a host discovery mechanism, use that instead |
| # REACTIVE FWD test |
| pingResult = main.FALSE |
| for i in range(2): # Retry if pingall fails first time |
| time1 = time.time() |
| pingResult = main.Mininet1.pingall() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=pingResult, |
| onpass="Reactive Pingall test passed", |
| onfail="Reactive Pingall failed, " + |
| "one or more ping pairs failed" ) |
| time2 = time.time() |
| main.log.info( "Time for pingall: %2f seconds" % |
| ( time2 - time1 ) ) |
| # timeout for fwd flows |
| time.sleep( 11 ) |
| # uninstall onos-app-fwd |
| main.step( "Uninstall reactive forwarding app" ) |
| uninstallResult = CLIs[0].deactivateApp( "org.onosproject.fwd" ) |
| utilities.assert_equals( expect=main.TRUE, actual=uninstallResult, |
| onpass="Uninstall fwd successful", |
| onfail="Uninstall fwd failed" ) |
| |
| main.step( "Check app ids" ) |
| appCheck2 = main.ONOScli1.appToIDCheck() |
| if appCheck2 != main.TRUE: |
| main.log.warn( CLIs[0].apps() ) |
| main.log.warn( CLIs[0].appIDs() ) |
| utilities.assert_equals( expect=main.TRUE, actual=appCheck2, |
| onpass="App Ids seem to be correct", |
| onfail="Something is wrong with app Ids" ) |
| |
| main.step( "Add host intents via cli" ) |
| intentIds = [] |
| # TODO: move the host numbers to params |
| # Maybe look at all the paths we ping? |
| intentAddResult = True |
| hostResult = main.TRUE |
| for i in range( 8, 18 ): |
| main.log.info( "Adding host intent between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| host1 = "00:00:00:00:00:" + \ |
| str( hex( i )[ 2: ] ).zfill( 2 ).upper() |
| host2 = "00:00:00:00:00:" + \ |
| str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper() |
| # NOTE: getHost can return None |
| host1Dict = main.ONOScli1.getHost( host1 ) |
| host2Dict = main.ONOScli1.getHost( host2 ) |
| host1Id = None |
| host2Id = None |
| if host1Dict and host2Dict: |
| host1Id = host1Dict.get( 'id', None ) |
| host2Id = host2Dict.get( 'id', None ) |
| if host1Id and host2Id: |
| tmpId = main.ONOScli1.addHostIntent( host1Id, host2Id ) |
| if tmpId: |
| main.log.info( "Added intent with id: " + tmpId ) |
| intentIds.append( tmpId ) |
| else: |
| main.log.error( "addHostIntent returned: " + |
| repr( tmpId ) ) |
| else: |
| main.log.error( "Error, getHost() failed for h" + str( i ) + |
| " and/or h" + str( i + 10 ) ) |
| hosts = main.ONOScli1.hosts() |
| main.log.warn( "Hosts output: " ) |
| try: |
| main.log.warn( json.dumps( json.loads( hosts ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( repr( hosts ) ) |
| hostResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, actual=hostResult, |
| onpass="Found a host id for each host", |
| onfail="Error looking up host ids" ) |
| |
| intentStart = time.time() |
| onosIds = main.ONOScli1.getAllIntentsId() |
| main.log.info( "Submitted intents: " + str( intentIds ) ) |
| main.log.info( "Intents in ONOS: " + str( onosIds ) ) |
| for intent in intentIds: |
| if intent in onosIds: |
| pass # intent submitted is in onos |
| else: |
| intentAddResult = False |
| if intentAddResult: |
| intentStop = time.time() |
| else: |
| intentStop = None |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| installedCheck = True |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| try: |
| for intent in json.loads( intents ): |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents" ) |
| # add submitted intents not in the store |
| tmplist = [ i for i, s in intentStates ] |
| missingIntents = False |
| for i in intentIds: |
| if i not in tmplist: |
| intentStates.append( ( i, " - " ) ) |
| missingIntents = True |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| leaders = main.ONOScli1.leaders() |
| try: |
| missing = False |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| missing = True |
| else: |
| main.log.error( "leaders() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| # Check all nodes |
| if missing: |
| response = main.ONOScli1.leaders( jsonFormat=False) |
| main.log.warn( "ONOS1 leaders output: \n" + |
| str( response ) ) |
| |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| |
| intentAddResult = bool( intentAddResult and not missingIntents and |
| installedCheck ) |
| if not intentAddResult: |
| main.log.error( "Error in pushing host intents to ONOS" ) |
| |
| main.step( "Intent Anti-Entropy dispersion" ) |
| for i in range(100): |
| correct = True |
| main.log.info( "Submitted intents: " + str( sorted( intentIds ) ) ) |
| for cli in CLIs: |
| onosIds = [] |
| ids = cli.getAllIntentsId() |
| onosIds.append( ids ) |
| main.log.debug( "Intents in " + cli.name + ": " + |
| str( sorted( onosIds ) ) ) |
| if sorted( ids ) != sorted( intentIds ): |
| main.log.warn( "Set of intent IDs doesn't match" ) |
| correct = False |
| break |
| else: |
| intents = json.loads( cli.intents() ) |
| for intent in intents: |
| if intent[ 'state' ] != "INSTALLED": |
| main.log.warn( "Intent " + intent[ 'id' ] + |
| " is " + intent[ 'state' ] ) |
| correct = False |
| break |
| if correct: |
| break |
| else: |
| time.sleep(1) |
| if not intentStop: |
| intentStop = time.time() |
| global gossipTime |
| gossipTime = intentStop - intentStart |
| main.log.info( "It took about " + str( gossipTime ) + |
| " seconds for all intents to appear in each node" ) |
| # FIXME: make this time configurable/calculate based off of number of |
| # nodes and gossip rounds |
| utilities.assert_greater_equals( |
| expect=40, actual=gossipTime, |
| onpass="ECM anti-entropy for intents worked within " + |
| "expected time", |
| onfail="Intent ECM anti-entropy took too long" ) |
| if gossipTime <= 40: |
| intentAddResult = True |
| |
| if not intentAddResult or "key" in pendingMap: |
| import time |
| installedCheck = True |
| main.log.info( "Sleeping 60 seconds to see if intents are found" ) |
| time.sleep( 60 ) |
| onosIds = main.ONOScli1.getAllIntentsId() |
| main.log.info( "Submitted intents: " + str( intentIds ) ) |
| main.log.info( "Intents in ONOS: " + str( onosIds ) ) |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| try: |
| for intent in json.loads( intents ): |
| # Iter through intents of a node |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents" ) |
| # add submitted intents not in the store |
| tmplist = [ i for i, s in intentStates ] |
| for i in intentIds: |
| if i not in tmplist: |
| intentStates.append( ( i, " - " ) ) |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| leaders = main.ONOScli1.leaders() |
| try: |
| missing = False |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| # check for election |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| # FIXME: this should only be after we start the app |
| topics.append( "org.onosproject.election" ) |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| missing = True |
| else: |
| main.log.error( "leaders() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| # Check all nodes |
| if missing: |
| response = main.ONOScli1.leaders( jsonFormat=False) |
| main.log.warn( "ONOS1 leaders output: \n" + |
| str( response ) ) |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| |
| def CASE4( self, main ): |
| """ |
| Ping across added host intents |
| """ |
| import json |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| main.case( "Verify connectivity by sendind traffic across Intents" ) |
| main.caseExplaination = "Ping across added host intents to check " +\ |
| "functionality and check the state of " +\ |
| "the intent" |
| main.step( "Ping across added host intents" ) |
| PingResult = main.TRUE |
| for i in range( 8, 18 ): |
| ping = main.Mininet1.pingHost( src="h" + str( i ), |
| target="h" + str( i + 10 ) ) |
| PingResult = PingResult and ping |
| if ping == main.FALSE: |
| main.log.warn( "Ping failed between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| elif ping == main.TRUE: |
| main.log.info( "Ping test passed!" ) |
| # Don't set PingResult or you'd override failures |
| if PingResult == main.FALSE: |
| main.log.error( |
| "Intents have not been installed correctly, pings failed." ) |
| # TODO: pretty print |
| main.log.warn( "ONOS1 intents: " ) |
| try: |
| tmpIntents = main.ONOScli1.intents() |
| main.log.warn( json.dumps( json.loads( tmpIntents ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( repr( tmpIntents ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=PingResult, |
| onpass="Intents have been installed correctly and pings work", |
| onfail="Intents have not been installed correctly, pings failed." ) |
| |
| main.step( "Check Intent state" ) |
| installedCheck = True |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| # Iter through intents of a node |
| try: |
| for intent in json.loads( intents ): |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents." ) |
| # Print states |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| utilities.assert_equals( expect=True, actual=installedCheck, |
| onpass="Intents are all INSTALLED", |
| onfail="Intents are not all in " + |
| "INSTALLED state" ) |
| |
| main.step( "Check leadership of topics" ) |
| leaders = main.ONOScli1.leaders() |
| topicCheck = main.TRUE |
| try: |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| # check for election |
| # TODO: Look at Devices as topics now that it uses this system |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| # FIXME: this should only be after we start the app |
| # FIXME: topics.append( "org.onosproject.election" ) |
| # Print leaders output |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| topicCheck = main.FALSE |
| else: |
| main.log.error( "leaders() returned None" ) |
| topicCheck = main.FALSE |
| except ( ValueError, TypeError ): |
| topicCheck = main.FALSE |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| # TODO: Check for a leader of these topics |
| utilities.assert_equals( expect=main.TRUE, actual=topicCheck, |
| onpass="intent Partitions is in leaders", |
| onfail="Some topics were lost " ) |
| # Print partitions |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| # Print Pending Map |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| |
| if not installedCheck: |
| main.log.info( "Waiting 60 seconds to see if the state of " + |
| "intents change" ) |
| time.sleep( 60 ) |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| # Iter through intents of a node |
| try: |
| for intent in json.loads( intents ): |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents." ) |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| leaders = main.ONOScli1.leaders() |
| try: |
| missing = False |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| # check for election |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| # FIXME: this should only be after we start the app |
| topics.append( "org.onosproject.election" ) |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| missing = True |
| else: |
| main.log.error( "leaders() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| if missing: |
| response = main.ONOScli1.leaders( jsonFormat=False) |
| main.log.warn( "ONOS1 leaders output: \n" + |
| str( response ) ) |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| # Print flowrules |
| main.log.debug( CLIs[0].flows( jsonFormat=False ) ) |
| main.step( "Wait a minute then ping again" ) |
| # the wait is above |
| PingResult = main.TRUE |
| for i in range( 8, 18 ): |
| ping = main.Mininet1.pingHost( src="h" + str( i ), |
| target="h" + str( i + 10 ) ) |
| PingResult = PingResult and ping |
| if ping == main.FALSE: |
| main.log.warn( "Ping failed between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| elif ping == main.TRUE: |
| main.log.info( "Ping test passed!" ) |
| # Don't set PingResult or you'd override failures |
| if PingResult == main.FALSE: |
| main.log.error( |
| "Intents have not been installed correctly, pings failed." ) |
| # TODO: pretty print |
| main.log.warn( "ONOS1 intents: " ) |
| try: |
| tmpIntents = main.ONOScli1.intents() |
| main.log.warn( json.dumps( json.loads( tmpIntents ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( repr( tmpIntents ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=PingResult, |
| onpass="Intents have been installed correctly and pings work", |
| onfail="Intents have not been installed correctly, pings failed." ) |
| |
| def CASE5( self, main ): |
| """ |
| Reading state of ONOS |
| """ |
| import json |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| |
| main.case( "Setting up and gathering data for current state" ) |
| # The general idea for this test case is to pull the state of |
| # ( intents,flows, topology,... ) from each ONOS node |
| # We can then compare them with each other and also with past states |
| |
| main.step( "Check that each switch has a master" ) |
| global mastershipState |
| mastershipState = '[]' |
| |
| # Assert that each device has a master |
| rolesNotNull = main.ONOScli1.rolesNotNull() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=rolesNotNull, |
| onpass="Each device has a master", |
| onfail="Some devices don't have a master assigned" ) |
| |
| main.step( "Get the Mastership of each switch" ) |
| ONOS1Mastership = main.ONOScli1.roles() |
| # TODO: Make this a meaningful check |
| if "Error" in ONOS1Mastership or not ONOS1Mastership: |
| main.log.error( "Error in getting ONOS roles" ) |
| main.log.warn( |
| "ONOS1 mastership response: " + |
| repr( ONOS1Mastership ) ) |
| consistentMastership = main.FALSE |
| else: |
| mastershipState = ONOS1Mastership |
| consistentMastership = main.TRUE |
| |
| main.step( "Get the intents from each controller" ) |
| global intentState |
| intentState = [] |
| ONOS1Intents = main.ONOScli1.intents( jsonFormat=True ) |
| intentCheck = main.FALSE |
| if "Error" in ONOS1Intents or not ONOS1Intents: |
| main.log.error( "Error in getting ONOS intents" ) |
| main.log.warn( "ONOS1 intents response: " + repr( ONOS1Intents ) ) |
| else: |
| intentCheck = main.TRUE |
| |
| main.step( "Get the flows from each controller" ) |
| global flowState |
| flowState = [] |
| flowCheck = main.FALSE |
| ONOS1Flows = main.ONOScli1.flows( jsonFormat=True ) |
| if "Error" in ONOS1Flows or not ONOS1Flows: |
| main.log.error( "Error in getting ONOS flows" ) |
| main.log.warn( "ONOS1 flows repsponse: " + ONOS1Flows ) |
| else: |
| # TODO: Do a better check, maybe compare flows on switches? |
| flowState = ONOS1Flows |
| flowCheck = main.TRUE |
| |
| main.step( "Get the OF Table entries" ) |
| global flows |
| flows = [] |
| for i in range( 1, 29 ): |
| flows.append( main.Mininet2.getFlowTable( 1.3, "s" + str( i ) ) ) |
| if flowCheck == main.FALSE: |
| for table in flows: |
| main.log.warn( table ) |
| # TODO: Compare switch flow tables with ONOS flow tables |
| |
| main.step( "Collecting topology information from ONOS" ) |
| devices = [] |
| devices.append( main.ONOScli1.devices() ) |
| hosts = [] |
| hosts.append( json.loads( main.ONOScli1.hosts() ) ) |
| ports = [] |
| ports.append( main.ONOScli1.ports() ) |
| links = [] |
| links.append( main.ONOScli1.links() ) |
| clusters = [] |
| clusters.append( main.ONOScli1.clusters() ) |
| |
| main.step( "Each host has an IP address" ) |
| ipResult = main.TRUE |
| for controller in range( 0, len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| for host in hosts[ controller ]: |
| if host is None or host.get( 'ipAddresses', [] ) == []: |
| main.log.error( |
| "DEBUG:Error with host ips on controller" + |
| controllerStr + ": " + str( host ) ) |
| ipResult = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=ipResult, |
| onpass="The ips of the hosts aren't empty", |
| onfail="The ip of at least one host is missing" ) |
| |
| # there should always only be one cluster |
| main.step( "There is only one dataplane cluster" ) |
| try: |
| numClusters = len( json.loads( clusters[ 0 ] ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing clusters[0]: " + |
| repr( clusters[ 0 ] ) ) |
| clusterResults = main.FALSE |
| if numClusters == 1: |
| clusterResults = main.TRUE |
| utilities.assert_equals( |
| expect=1, |
| actual=numClusters, |
| onpass="ONOS shows 1 SCC", |
| onfail="ONOS shows " + str( numClusters ) + " SCCs" ) |
| |
| main.step( "Comparing ONOS topology to MN" ) |
| devicesResults = main.TRUE |
| linksResults = main.TRUE |
| hostsResults = main.TRUE |
| mnSwitches = main.Mininet1.getSwitches() |
| mnLinks = main.Mininet1.getLinks() |
| mnHosts = main.Mininet1.getHosts() |
| for controller in range( numControllers ): |
| controllerStr = str( controller + 1 ) |
| if devices[ controller ] and ports[ controller ] and\ |
| "Error" not in devices[ controller ] and\ |
| "Error" not in ports[ controller ]: |
| |
| currentDevicesResult = main.Mininet1.compareSwitches( |
| mnSwitches, |
| json.loads( devices[ controller ] ), |
| json.loads( ports[ controller ] ) ) |
| else: |
| currentDevicesResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentDevicesResult, |
| onpass="ONOS" + controllerStr + |
| " Switches view is correct", |
| onfail="ONOS" + controllerStr + |
| " Switches view is incorrect" ) |
| if links[ controller ] and "Error" not in links[ controller ]: |
| currentLinksResult = main.Mininet1.compareLinks( |
| mnSwitches, mnLinks, |
| json.loads( links[ controller ] ) ) |
| else: |
| currentLinksResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentLinksResult, |
| onpass="ONOS" + controllerStr + |
| " links view is correct", |
| onfail="ONOS" + controllerStr + |
| " links view is incorrect" ) |
| |
| if hosts[ controller ] or "Error" not in hosts[ controller ]: |
| currentHostsResult = main.Mininet1.compareHosts( |
| mnHosts, |
| hosts[ controller ] ) |
| else: |
| currentHostsResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentHostsResult, |
| onpass="ONOS" + controllerStr + |
| " hosts exist in Mininet", |
| onfail="ONOS" + controllerStr + |
| " hosts don't match Mininet" ) |
| |
| devicesResults = devicesResults and currentDevicesResult |
| linksResults = linksResults and currentLinksResult |
| hostsResults = hostsResults and currentHostsResult |
| |
| main.step( "Device information is correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=devicesResults, |
| onpass="Device information is correct", |
| onfail="Device information is incorrect" ) |
| |
| main.step( "Links are correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=linksResults, |
| onpass="Link are correct", |
| onfail="Links are incorrect" ) |
| |
| main.step( "Hosts are correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=hostsResults, |
| onpass="Hosts are correct", |
| onfail="Hosts are incorrect" ) |
| |
| def CASE6( self, main ): |
| """ |
| The Failure case. |
| """ |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| |
| # Reset non-persistent variables |
| try: |
| iCounterValue = 0 |
| except NameError: |
| main.log.error( "iCounterValue not defined, setting to 0" ) |
| iCounterValue = 0 |
| |
| main.case( "Restart ONOS node" ) |
| main.caseExplaination = "Killing ONOS process and restart cli " +\ |
| "sessions once onos is up." |
| main.step( "Killing ONOS processes" ) |
| killResult = main.ONOSbench.onosKill( ONOS1Ip ) |
| start = time.time() |
| utilities.assert_equals( expect=main.TRUE, actual=killResult, |
| onpass="ONOS Killed", |
| onfail="Error killing ONOS" ) |
| |
| main.step( "Checking if ONOS is up yet" ) |
| count = 0 |
| while count < 10: |
| onos1Isup = main.ONOSbench.isup( ONOS1Ip ) |
| if onos1Isup == main.TRUE: |
| elapsed = time.time() - start |
| break |
| else: |
| count = count + 1 |
| utilities.assert_equals( expect=main.TRUE, actual=onos1Isup, |
| onpass="ONOS is back up", |
| onfail="ONOS failed to start" ) |
| |
| main.log.step( "Starting ONOS CLI sessions" ) |
| cliResults = main.ONOScli1.startOnosCli( ONOS1Ip ) |
| utilities.assert_equals( expect=main.TRUE, actual=cliResults, |
| onpass="ONOS cli startup successful", |
| onfail="ONOS cli startup failed" ) |
| |
| if elapsed: |
| main.log.info( "ESTIMATE: ONOS took %s seconds to restart" % |
| str( elapsed ) ) |
| main.restartTime = elapsed |
| else: |
| main.restartTime = -1 |
| time.sleep( 5 ) |
| # rerun on election apps |
| main.ONOScli1.electionTestRun() |
| |
| def CASE7( self, main ): |
| """ |
| Check state after ONOS failure |
| """ |
| import json |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| main.case( "Running ONOS Constant State Tests" ) |
| main.step( "Check that each switch has a master" ) |
| # Assert that each device has a master |
| rolesNotNull = main.ONOScli1.rolesNotNull() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=rolesNotNull, |
| onpass="Each device has a master", |
| onfail="Some devices don't have a master assigned" ) |
| |
| main.step( "Check if switch roles are consistent across all nodes" ) |
| ONOS1Mastership = main.ONOScli1.roles() |
| # FIXME: Refactor this whole case for single instance |
| if "Error" in ONOS1Mastership or not ONOS1Mastership: |
| main.log.error( "Error in getting ONOS mastership" ) |
| main.log.warn( "ONOS1 mastership response: " + |
| repr( ONOS1Mastership ) ) |
| consistentMastership = main.FALSE |
| else: |
| consistentMastership = main.TRUE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentMastership, |
| onpass="Switch roles are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of switch roles" ) |
| |
| description2 = "Compare switch roles from before failure" |
| main.step( description2 ) |
| |
| currentJson = json.loads( ONOS1Mastership ) |
| oldJson = json.loads( mastershipState ) |
| mastershipCheck = main.TRUE |
| for i in range( 1, 29 ): |
| switchDPID = str( |
| main.Mininet1.getSwitchDPID( switch="s" + str( i ) ) ) |
| |
| current = [ switch[ 'master' ] for switch in currentJson |
| if switchDPID in switch[ 'id' ] ] |
| old = [ switch[ 'master' ] for switch in oldJson |
| if switchDPID in switch[ 'id' ] ] |
| if current == old: |
| mastershipCheck = mastershipCheck and main.TRUE |
| else: |
| main.log.warn( "Mastership of switch %s changed" % switchDPID ) |
| mastershipCheck = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=mastershipCheck, |
| onpass="Mastership of Switches was not changed", |
| onfail="Mastership of some switches changed" ) |
| mastershipCheck = mastershipCheck and consistentMastership |
| |
| main.step( "Get the intents and compare across all nodes" ) |
| ONOS1Intents = main.ONOScli1.intents( jsonFormat=True ) |
| intentCheck = main.FALSE |
| if "Error" in ONOS1Intents or not ONOS1Intents: |
| main.log.error( "Error in getting ONOS intents" ) |
| main.log.warn( "ONOS1 intents response: " + repr( ONOS1Intents ) ) |
| else: |
| intentCheck = main.TRUE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=intentCheck, |
| onpass="Intents are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of intents" ) |
| # Print the intent states |
| intents = [] |
| intents.append( ONOS1Intents ) |
| intentStates = [] |
| for node in intents: # Iter through ONOS nodes |
| nodeStates = [] |
| # Iter through intents of a node |
| for intent in json.loads( node ): |
| nodeStates.append( intent[ 'state' ] ) |
| intentStates.append( nodeStates ) |
| out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ] |
| main.log.info( dict( out ) ) |
| |
| # NOTE: Store has no durability, so intents are lost across system |
| # restarts |
| """ |
| main.step( "Compare current intents with intents before the failure" ) |
| # NOTE: this requires case 5 to pass for intentState to be set. |
| # maybe we should stop the test if that fails? |
| sameIntents = main.FALSE |
| if intentState and intentState == ONOSIntents[ 0 ]: |
| sameIntents = main.TRUE |
| main.log.info( "Intents are consistent with before failure" ) |
| # TODO: possibly the states have changed? we may need to figure out |
| # what the acceptable states are |
| elif len( intentState ) == len( ONOSIntents[ 0 ] ): |
| sameIntents = main.TRUE |
| try: |
| before = json.loads( intentState ) |
| after = json.loads( ONOSIntents[ 0 ] ) |
| for intent in before: |
| if intent not in after: |
| sameIntents = main.FALSE |
| main.log.debug( "Intent is not currently in ONOS " + |
| "(at least in the same form):" ) |
| main.log.debug( json.dumps( intent ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Exception printing intents" ) |
| main.log.debug( repr( ONOSIntents[0] ) ) |
| main.log.debug( repr( intentState ) ) |
| if sameIntents == main.FALSE: |
| try: |
| main.log.debug( "ONOS intents before: " ) |
| main.log.debug( json.dumps( json.loads( intentState ), |
| sort_keys=True, indent=4, |
| separators=( ',', ': ' ) ) ) |
| main.log.debug( "Current ONOS intents: " ) |
| main.log.debug( json.dumps( json.loads( ONOSIntents[ 0 ] ), |
| sort_keys=True, indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Exception printing intents" ) |
| main.log.debug( repr( ONOSIntents[0] ) ) |
| main.log.debug( repr( intentState ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=sameIntents, |
| onpass="Intents are consistent with before failure", |
| onfail="The Intents changed during failure" ) |
| intentCheck = intentCheck and sameIntents |
| """ |
| main.step( "Get the OF Table entries and compare to before " + |
| "component failure" ) |
| FlowTables = main.TRUE |
| flows2 = [] |
| for i in range( 28 ): |
| main.log.info( "Checking flow table on s" + str( i + 1 ) ) |
| tmpFlows = main.Mininet2.getFlowTable( 1.3, "s" + str( i + 1 ) ) |
| flows2.append( tmpFlows ) |
| tempResult = main.Mininet2.flowComp( |
| flow1=flows[ i ], |
| flow2=tmpFlows ) |
| FlowTables = FlowTables and tempResult |
| if FlowTables == main.FALSE: |
| main.log.info( "Differences in flow table for switch: s" + |
| str( i + 1 ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=FlowTables, |
| onpass="No changes were found in the flow tables", |
| onfail="Changes were found in the flow tables" ) |
| |
| main.step( "Leadership Election is still functional" ) |
| # Test of LeadershipElection |
| |
| leader = ONOS1Ip |
| leaderResult = main.TRUE |
| for controller in range( 1, numControllers + 1 ): |
| # loop through ONOScli handlers |
| node = getattr( main, ( 'ONOScli' + str( controller ) ) ) |
| leaderN = node.electionTestLeader() |
| # verify leader is ONOS1 |
| # NOTE even though we restarted ONOS, it is the only one so onos 1 |
| # must be leader |
| if leaderN == leader: |
| # all is well |
| pass |
| elif leaderN == main.FALSE: |
| # error in response |
| main.log.error( "Something is wrong with " + |
| "electionTestLeader function, check the" + |
| " error logs" ) |
| leaderResult = main.FALSE |
| elif leader != leaderN: |
| leaderResult = main.FALSE |
| main.log.error( "ONOS" + str( controller ) + " sees " + |
| str( leaderN ) + |
| " as the leader of the election app. " + |
| "Leader should be " + str( leader ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| def CASE8( self, main ): |
| """ |
| Compare topo |
| """ |
| import json |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| |
| main.case( "Compare ONOS Topology view to Mininet topology" ) |
| main.caseExplaination = "Compare topology objects between Mininet" +\ |
| " and ONOS" |
| |
| main.step( "Comparing ONOS topology to MN" ) |
| devicesResults = main.TRUE |
| linksResults = main.TRUE |
| hostsResults = main.TRUE |
| hostAttachmentResults = True |
| topoResult = main.FALSE |
| elapsed = 0 |
| count = 0 |
| main.step( "Collecting topology information from ONOS" ) |
| startTime = time.time() |
| # Give time for Gossip to work |
| while topoResult == main.FALSE and elapsed < 60: |
| count += 1 |
| cliStart = time.time() |
| devices = [] |
| devices.append( main.ONOScli1.devices() ) |
| hosts = [] |
| hosts.append( json.loads( main.ONOScli1.hosts() ) ) |
| ipResult = main.TRUE |
| for controller in range( 0, len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| for host in hosts[ controller ]: |
| if host is None or host.get( 'ipAddresses', [] ) == []: |
| main.log.error( |
| "DEBUG:Error with host ips on controller" + |
| controllerStr + ": " + str( host ) ) |
| ipResult = main.FALSE |
| ports = [] |
| ports.append( main.ONOScli1.ports() ) |
| links = [] |
| links.append( main.ONOScli1.links() ) |
| clusters = [] |
| clusters.append( main.ONOScli1.clusters() ) |
| |
| elapsed = time.time() - startTime |
| cliTime = time.time() - cliStart |
| print "CLI time: " + str( cliTime ) |
| |
| mnSwitches = main.Mininet1.getSwitches() |
| mnLinks = main.Mininet1.getLinks() |
| mnHosts = main.Mininet1.getHosts() |
| for controller in range( numControllers ): |
| controllerStr = str( controller + 1 ) |
| if devices[ controller ] and ports[ controller ] and\ |
| "Error" not in devices[ controller ] and\ |
| "Error" not in ports[ controller ]: |
| |
| currentDevicesResult = main.Mininet1.compareSwitches( |
| mnSwitches, |
| json.loads( devices[ controller ] ), |
| json.loads( ports[ controller ] ) ) |
| else: |
| currentDevicesResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentDevicesResult, |
| onpass="ONOS" + controllerStr + |
| " Switches view is correct", |
| onfail="ONOS" + controllerStr + |
| " Switches view is incorrect" ) |
| |
| if links[ controller ] and "Error" not in links[ controller ]: |
| currentLinksResult = main.Mininet1.compareLinks( |
| mnSwitches, mnLinks, |
| json.loads( links[ controller ] ) ) |
| else: |
| currentLinksResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentLinksResult, |
| onpass="ONOS" + controllerStr + |
| " links view is correct", |
| onfail="ONOS" + controllerStr + |
| " links view is incorrect" ) |
| |
| if hosts[ controller ] or "Error" not in hosts[ controller ]: |
| currentHostsResult = main.Mininet1.compareHosts( |
| mnHosts, |
| hosts[ controller ] ) |
| else: |
| currentHostsResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentHostsResult, |
| onpass="ONOS" + controllerStr + |
| " hosts exist in Mininet", |
| onfail="ONOS" + controllerStr + |
| " hosts don't match Mininet" ) |
| # CHECKING HOST ATTACHMENT POINTS |
| hostAttachment = True |
| zeroHosts = False |
| # FIXME: topo-HA/obelisk specific mappings: |
| # key is mac and value is dpid |
| mappings = {} |
| for i in range( 1, 29 ): # hosts 1 through 28 |
| # set up correct variables: |
| macId = "00:" * 5 + hex( i ).split( "0x" )[1].upper().zfill(2) |
| if i == 1: |
| deviceId = "1000".zfill(16) |
| elif i == 2: |
| deviceId = "2000".zfill(16) |
| elif i == 3: |
| deviceId = "3000".zfill(16) |
| elif i == 4: |
| deviceId = "3004".zfill(16) |
| elif i == 5: |
| deviceId = "5000".zfill(16) |
| elif i == 6: |
| deviceId = "6000".zfill(16) |
| elif i == 7: |
| deviceId = "6007".zfill(16) |
| elif i >= 8 and i <= 17: |
| dpid = '3' + str( i ).zfill( 3 ) |
| deviceId = dpid.zfill(16) |
| elif i >= 18 and i <= 27: |
| dpid = '6' + str( i ).zfill( 3 ) |
| deviceId = dpid.zfill(16) |
| elif i == 28: |
| deviceId = "2800".zfill(16) |
| mappings[ macId ] = deviceId |
| if hosts[ controller ] or "Error" not in hosts[ controller ]: |
| if hosts[ controller ] == []: |
| main.log.warn( "There are no hosts discovered" ) |
| zeroHosts = True |
| else: |
| for host in hosts[ controller ]: |
| mac = None |
| location = None |
| device = None |
| port = None |
| try: |
| mac = host.get( 'mac' ) |
| assert mac, "mac field could not be found for this host object" |
| |
| location = host.get( 'location' ) |
| assert location, "location field could not be found for this host object" |
| |
| # Trim the protocol identifier off deviceId |
| device = str( location.get( 'elementId' ) ).split(':')[1] |
| assert device, "elementId field could not be found for this host location object" |
| |
| port = location.get( 'port' ) |
| assert port, "port field could not be found for this host location object" |
| |
| # Now check if this matches where they should be |
| if mac and device and port: |
| if str( port ) != "1": |
| main.log.error( "The attachment port is incorrect for " + |
| "host " + str( mac ) + |
| ". Expected: 1 Actual: " + str( port) ) |
| hostAttachment = False |
| if device != mappings[ str( mac ) ]: |
| main.log.error( "The attachment device is incorrect for " + |
| "host " + str( mac ) + |
| ". Expected: " + mappings[ str( mac ) ] + |
| " Actual: " + device ) |
| hostAttachment = False |
| else: |
| hostAttachment = False |
| except AssertionError: |
| main.log.exception( "Json object not as expected" ) |
| main.log.error( repr( host ) ) |
| hostAttachment = False |
| else: |
| main.log.error( "No hosts json output or \"Error\"" + |
| " in output. hosts = " + |
| repr( hosts[ controller ] ) ) |
| if zeroHosts is False: |
| hostAttachment = True |
| |
| |
| devicesResults = devicesResults and currentDevicesResult |
| linksResults = linksResults and currentLinksResult |
| hostsResults = hostsResults and currentHostsResult |
| hostAttachmentResults = hostAttachmentResults and\ |
| hostAttachment |
| |
| # "consistent" results don't make sense for single instance |
| # there should always only be one cluster |
| numClusters = len( json.loads( clusters[ 0 ] ) ) |
| clusterResults = main.FALSE |
| if numClusters == 1: |
| clusterResults = main.TRUE |
| utilities.assert_equals( |
| expect=1, |
| actual=numClusters, |
| onpass="ONOS shows 1 SCC", |
| onfail="ONOS shows " + str( numClusters ) + " SCCs" ) |
| |
| topoResult = ( devicesResults and linksResults |
| and hostsResults and ipResult and clusterResults and |
| hostAttachmentResults ) |
| |
| topoResult = topoResult and int( count <= 2 ) |
| note = "note it takes about " + str( int( cliTime ) ) + \ |
| " seconds for the test to make all the cli calls to fetch " +\ |
| "the topology from each ONOS instance" |
| main.log.info( |
| "Very crass estimate for topology discovery/convergence( " + |
| str( note ) + " ): " + str( elapsed ) + " seconds, " + |
| str( count ) + " tries" ) |
| utilities.assert_equals( expect=main.TRUE, actual=topoResult, |
| onpass="Topology Check Test successful", |
| onfail="Topology Check Test NOT successful" ) |
| |
| def CASE9( self, main ): |
| """ |
| Link s3-s28 down |
| """ |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| # NOTE: You should probably run a topology check after this |
| |
| linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| |
| description = "Turn off a link to ensure that Link Discovery " +\ |
| "is working properly" |
| main.case( description ) |
| |
| main.step( "Kill Link between s3 and s28" ) |
| LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" ) |
| main.log.info( "Waiting " + str( linkSleep ) + |
| " seconds for link down to be discovered" ) |
| time.sleep( linkSleep ) |
| utilities.assert_equals( expect=main.TRUE, actual=LinkDown, |
| onpass="Link down successful", |
| onfail="Failed to bring link down" ) |
| # TODO do some sort of check here |
| |
| def CASE10( self, main ): |
| """ |
| Link s3-s28 up |
| """ |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| # NOTE: You should probably run a topology check after this |
| |
| linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| |
| description = "Restore a link to ensure that Link Discovery is " + \ |
| "working properly" |
| main.case( description ) |
| |
| main.step( "Bring link between s3 and s28 back up" ) |
| LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" ) |
| main.log.info( "Waiting " + str( linkSleep ) + |
| " seconds for link up to be discovered" ) |
| time.sleep( linkSleep ) |
| utilities.assert_equals( expect=main.TRUE, actual=LinkUp, |
| onpass="Link up successful", |
| onfail="Failed to bring link up" ) |
| # TODO do some sort of check here |
| |
| def CASE11( self, main ): |
| """ |
| Switch Down |
| """ |
| # NOTE: You should probably run a topology check after this |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| |
| switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| |
| description = "Killing a switch to ensure it is discovered correctly" |
| main.case( description ) |
| switch = main.params[ 'kill' ][ 'switch' ] |
| switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| |
| # TODO: Make this switch parameterizable |
| main.step( "Kill " + switch ) |
| main.log.info( "Deleting " + switch ) |
| main.Mininet1.delSwitch( switch ) |
| main.log.info( "Waiting " + str( switchSleep ) + |
| " seconds for switch down to be discovered" ) |
| time.sleep( switchSleep ) |
| device = main.ONOScli1.getDevice( dpid=switchDPID ) |
| # Peek at the deleted switch |
| main.log.warn( str( device ) ) |
| result = main.FALSE |
| if device and device[ 'available' ] is False: |
| result = main.TRUE |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="Kill switch successful", |
| onfail="Failed to kill switch?" ) |
| |
| def CASE12( self, main ): |
| """ |
| Switch Up |
| """ |
| # NOTE: You should probably run a topology check after this |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert ONOS1Port, "ONOS1Port not defined" |
| assert ONOS2Port, "ONOS2Port not defined" |
| assert ONOS3Port, "ONOS3Port not defined" |
| assert ONOS4Port, "ONOS4Port not defined" |
| assert ONOS5Port, "ONOS5Port not defined" |
| assert ONOS6Port, "ONOS6Port not defined" |
| assert ONOS7Port, "ONOS7Port not defined" |
| |
| switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| switch = main.params[ 'kill' ][ 'switch' ] |
| switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| links = main.params[ 'kill' ][ 'links' ].split() |
| description = "Adding a switch to ensure it is discovered correctly" |
| main.case( description ) |
| |
| main.step( "Add back " + switch ) |
| main.Mininet1.addSwitch( switch, dpid=switchDPID ) |
| for peer in links: |
| main.Mininet1.addLink( switch, peer ) |
| main.Mininet1.assignSwController( sw=switch.split( 's' )[ 1 ], |
| ip1=ONOS1Ip, |
| port1=ONOS1Port ) |
| main.log.info( "Waiting " + str( switchSleep ) + |
| " seconds for switch up to be discovered" ) |
| time.sleep( switchSleep ) |
| device = main.ONOScli1.getDevice( dpid=switchDPID ) |
| # Peek at the deleted switch |
| main.log.warn( str( device ) ) |
| result = main.FALSE |
| if device and device[ 'available' ]: |
| result = main.TRUE |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="add switch successful", |
| onfail="Failed to add switch?" ) |
| |
| def CASE13( self, main ): |
| """ |
| Clean up |
| """ |
| import os |
| import time |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| # printing colors to terminal |
| colors = { 'cyan': '\033[96m', 'purple': '\033[95m', |
| 'blue': '\033[94m', 'green': '\033[92m', |
| 'yellow': '\033[93m', 'red': '\033[91m', 'end': '\033[0m' } |
| main.case( "Test Cleanup" ) |
| main.step( "Killing tcpdumps" ) |
| main.Mininet2.stopTcpdump() |
| |
| main.step( "Copying MN pcap and ONOS log files to test station" ) |
| testname = main.TEST |
| teststationUser = main.params[ 'TESTONUSER' ] |
| teststationIP = main.params[ 'TESTONIP' ] |
| # NOTE: MN Pcap file is being saved to ~/packet_captures |
| # scp this file as MN and TestON aren't necessarily the same vm |
| # FIXME: scp |
| # mn files |
| # TODO: Load these from params |
| # NOTE: must end in / |
| logFolder = "/opt/onos/log/" |
| logFiles = [ "karaf.log", "karaf.log.1" ] |
| # NOTE: must end in / |
| dstDir = "~/packet_captures/" |
| for f in logFiles: |
| main.ONOSbench.handle.sendline( "scp sdn@" + ONOS1Ip + ":" + |
| logFolder + f + " " + |
| teststationUser + "@" + |
| teststationIP + ":" + dstDir + |
| str( testname ) + "-ONOS1-" + f ) |
| main.ONOSbench.handle.expect( "\$" ) |
| |
| # std*.log's |
| # NOTE: must end in / |
| logFolder = "/opt/onos/var/" |
| logFiles = [ "stderr.log", "stdout.log" ] |
| # NOTE: must end in / |
| dstDir = "~/packet_captures/" |
| for f in logFiles: |
| main.ONOSbench.handle.sendline( "scp sdn@" + ONOS1Ip + ":" + |
| logFolder + f + " " + |
| teststationUser + "@" + |
| teststationIP + ":" + dstDir + |
| str( testname ) + "-ONOS1-" + f ) |
| main.ONOSbench.handle.expect( "\$" ) |
| # sleep so scp can finish |
| time.sleep( 10 ) |
| |
| main.step( "Stopping Mininet" ) |
| mnResult = main.Mininet1.stopNet() |
| utilities.assert_equals( expect=main.TRUE, actual=mnResult, |
| onpass="Mininet stopped", |
| onfail="MN cleanup NOT successful" ) |
| |
| main.step( "Checking ONOS Logs for errors" ) |
| print colors[ 'purple' ] + "Checking logs for errors on ONOS1:" + \ |
| colors[ 'end' ] |
| print main.ONOSbench.checkLogs( ONOS1Ip, restart=True ) |
| |
| main.step( "Packing and rotating pcap archives" ) |
| os.system( "~/TestON/dependencies/rotate.sh " + str( testname ) ) |
| |
| try: |
| timerLog = open( main.logdir + "/Timers.csv", 'w') |
| # Overwrite with empty line and close |
| labels = "Gossip Intents, Restart" |
| data = str( gossipTime ) + ", " + str( main.restartTime ) |
| timerLog.write( labels + "\n" + data ) |
| timerLog.close() |
| except NameError, e: |
| main.log.exception(e) |
| |
| def CASE14( self, main ): |
| """ |
| start election app on all onos nodes |
| """ |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| |
| main.case("Start Leadership Election app") |
| main.step( "Install leadership election app" ) |
| appResult = main.ONOScli1.activateApp( "org.onosproject.election" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=appResult, |
| onpass="Election app installed", |
| onfail="Something went wrong with installing Leadership election" ) |
| |
| main.step( "Run for election on each node" ) |
| leaderResult = main.ONOScli1.electionTestRun() |
| # check for leader |
| leader = main.ONOScli1.electionTestLeader() |
| # verify leader is ONOS1 |
| if leader == ONOS1Ip: |
| # all is well |
| pass |
| elif leader is None: |
| # No leader elected |
| main.log.error( "No leader was elected" ) |
| leaderResult = main.FALSE |
| elif leader == main.FALSE: |
| # error in response |
| # TODO: add check for "Command not found:" in the driver, this |
| # means the app isn't loaded |
| main.log.error( "Something is wrong with electionTestLeader" + |
| " function, check the error logs" ) |
| leaderResult = main.FALSE |
| else: |
| # error in response |
| main.log.error( |
| "Unexpected response from electionTestLeader function:'" + |
| str( leader ) + |
| "'" ) |
| leaderResult = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Successfully ran for leadership", |
| onfail="Failed to run for leadership" ) |
| |
| def CASE15( self, main ): |
| """ |
| Check that Leadership Election is still functional |
| """ |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| leaderResult = main.TRUE |
| description = "Check that Leadership Election is still functional" |
| main.case( description ) |
| main.step( "Find current leader and withdraw" ) |
| leader = main.ONOScli1.electionTestLeader() |
| # do some sanity checking on leader before using it |
| withdrawResult = main.FALSE |
| if leader == ONOS1Ip: |
| oldLeader = getattr( main, "ONOScli1" ) |
| elif leader is None or leader == main.FALSE: |
| main.log.error( |
| "Leader for the election app should be an ONOS node," + |
| "instead got '" + str( leader ) + "'" ) |
| leaderResult = main.FALSE |
| oldLeader = None |
| else: |
| main.log.error( "Leader election --- why am I HERE?!?") |
| leaderResult = main.FALSE |
| oldLeader = None |
| if oldLeader: |
| withdrawResult = oldLeader.electionTestWithdraw() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=withdrawResult, |
| onpass="Node was withdrawn from election", |
| onfail="Node was not withdrawn from election" ) |
| |
| main.step( "Make sure new leader is elected" ) |
| leaderN = main.ONOScli1.electionTestLeader() |
| if leaderN == leader: |
| main.log.error( "ONOS still sees " + str( leaderN ) + |
| " as leader after they withdrew" ) |
| leaderResult = main.FALSE |
| elif leaderN == main.FALSE: |
| # error in response |
| # TODO: add check for "Command not found:" in the driver, this |
| # means the app isn't loaded |
| main.log.error( "Something is wrong with electionTestLeader " + |
| "function, check the error logs" ) |
| leaderResult = main.FALSE |
| elif leaderN is None: |
| main.log.info( |
| "There is no leader after the app withdrew from election" ) |
| leaderResult = main.TRUE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| main.step( "Run for election on old leader( just so everyone " + |
| "is in the hat )" ) |
| if oldLeader: |
| runResult = oldLeader.electionTestRun() |
| else: |
| runResult = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=runResult, |
| onpass="App re-ran for election", |
| onfail="App failed to run for election" ) |
| |
| main.step( "Node became leader when it ran for election" ) |
| afterRun = main.ONOScli1.electionTestLeader() |
| # verify leader is ONOS1 |
| if afterRun == ONOS1Ip: |
| afterResult = main.TRUE |
| else: |
| afterResult = main.FALSE |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=afterResult, |
| onpass="Old leader successfully re-ran for election", |
| onfail="Something went wrong with Leadership election after " + |
| "the old leader re-ran for election" ) |
| |
| def CASE16( self, main ): |
| """ |
| Install Distributed Primitives app |
| """ |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert CLIs, "CLIs not defined" |
| assert nodes, "nodes not defined" |
| |
| # Variables for the distributed primitives tests |
| global pCounterName |
| global iCounterName |
| global pCounterValue |
| global iCounterValue |
| global onosSet |
| global onosSetName |
| pCounterName = "TestON-Partitions" |
| iCounterName = "TestON-inMemory" |
| pCounterValue = 0 |
| iCounterValue = 0 |
| onosSet = set([]) |
| onosSetName = "TestON-set" |
| |
| description = "Install Primitives app" |
| main.case( description ) |
| main.step( "Install Primitives app" ) |
| appName = "org.onosproject.distributedprimitives" |
| appResults = CLIs[0].activateApp( appName ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=appResults, |
| onpass="Primitives app activated", |
| onfail="Primitives app not activated" ) |
| |
| def CASE17( self, main ): |
| """ |
| Check for basic functionality with distributed primitives |
| """ |
| import json |
| # Make sure variables are defined/set |
| assert numControllers, "numControllers not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert CLIs, "CLIs not defined" |
| assert nodes, "nodes not defined" |
| assert pCounterName, "pCounterName not defined" |
| assert iCounterName, "iCounterName not defined" |
| assert onosSetName, "onosSetName not defined" |
| # NOTE: assert fails if value is 0/None/Empty/False |
| try: |
| pCounterValue |
| except NameError: |
| main.log.error( "pCounterValue not defined, setting to 0" ) |
| pCounterValue = 0 |
| try: |
| iCounterValue |
| except NameError: |
| main.log.error( "iCounterValue not defined, setting to 0" ) |
| iCounterValue = 0 |
| try: |
| onosSet |
| except NameError: |
| main.log.error( "onosSet not defined, setting to empty Set" ) |
| onosSet = set([]) |
| # Variables for the distributed primitives tests. These are local only |
| addValue = "a" |
| addAllValue = "a b c d e f" |
| retainValue = "c d e f" |
| |
| description = "Check for basic functionality with distributed " +\ |
| "primitives" |
| main.case( description ) |
| main.caseExplaination = "Test the methods of the distributed primitives (counters and sets) throught the cli" |
| # DISTRIBUTED ATOMIC COUNTERS |
| main.step( "Increment and get a default counter on each node" ) |
| pCounters = [] |
| threads = [] |
| addedPValues = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].counterTestIncrement, |
| name="counterIncrement-" + str( i ), |
| args=[ pCounterName ] ) |
| pCounterValue += 1 |
| addedPValues.append( pCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| pCounters.append( t.result ) |
| # Check that counter incremented numController times |
| pCounterResults = True |
| for i in addedPValues: |
| tmpResult = i in pCounters |
| pCounterResults = pCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in partitioned " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="Default counter incremented", |
| onfail="Error incrementing default" + |
| " counter" ) |
| |
| main.step( "Increment and get an in memory counter on each node" ) |
| iCounters = [] |
| addedIValues = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].counterTestIncrement, |
| name="icounterIncrement-" + str( i ), |
| args=[ iCounterName ], |
| kwargs={ "inMemory": True } ) |
| iCounterValue += 1 |
| addedIValues.append( iCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| iCounters.append( t.result ) |
| # Check that counter incremented numController times |
| iCounterResults = True |
| for i in addedIValues: |
| tmpResult = i in iCounters |
| iCounterResults = iCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in the in-memory " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=iCounterResults, |
| onpass="In memory counter incremented", |
| onfail="Error incrementing in memory" + |
| " counter" ) |
| |
| main.step( "Check counters are consistant across nodes" ) |
| onosCounters = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].counters, |
| name="counters-" + str( i ) ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| onosCounters.append( t.result ) |
| tmp = [ i == onosCounters[ 0 ] for i in onosCounters ] |
| if all( tmp ): |
| main.log.info( "Counters are consistent across all nodes" ) |
| consistentCounterResults = main.TRUE |
| else: |
| main.log.error( "Counters are not consistent across all nodes" ) |
| consistentCounterResults = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=consistentCounterResults, |
| onpass="ONOS counters are consistent " + |
| "across nodes", |
| onfail="ONOS Counters are inconsistent " + |
| "across nodes" ) |
| |
| main.step( "Counters we added have the correct values" ) |
| correctResults = main.TRUE |
| for i in range( numControllers ): |
| current = json.loads( onosCounters[i] ) |
| pValue = None |
| iValue = None |
| try: |
| for database in current: |
| partitioned = database.get( 'partitionedDatabaseCounters' ) |
| if partitioned: |
| for value in partitioned: |
| if value.get( 'name' ) == pCounterName: |
| pValue = value.get( 'value' ) |
| break |
| inMemory = database.get( 'inMemoryDatabaseCounters' ) |
| if inMemory: |
| for value in inMemory: |
| if value.get( 'name' ) == iCounterName: |
| iValue = value.get( 'value' ) |
| break |
| except AttributeError, e: |
| main.log.error( "ONOS" + str( i + 1 ) + " counters result " + |
| "is not as expected" ) |
| correctResults = main.FALSE |
| if pValue == pCounterValue: |
| main.log.info( "Partitioned counter value is correct" ) |
| else: |
| main.log.error( "Partitioned counter value is incorrect," + |
| " expected value: " + str( pCounterValue ) |
| + " current value: " + str( pValue ) ) |
| correctResults = main.FALSE |
| if iValue == iCounterValue: |
| main.log.info( "In memory counter value is correct" ) |
| else: |
| main.log.error( "In memory counter value is incorrect, " + |
| "expected value: " + str( iCounterValue ) + |
| " current value: " + str( iValue ) ) |
| correctResults = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=correctResults, |
| onpass="Added counters are correct", |
| onfail="Added counters are incorrect" ) |
| # DISTRIBUTED SETS |
| main.step( "Distributed Set get" ) |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=getResults, |
| onpass="Set elements are correct", |
| onfail="Set elements are incorrect" ) |
| |
| main.step( "Distributed Set size" ) |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=sizeResults, |
| onpass="Set sizes are correct", |
| onfail="Set sizes are incorrect" ) |
| |
| main.step( "Distributed Set add()" ) |
| onosSet.add( addValue ) |
| addResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestAdd, |
| name="setTestAdd-" + str( i ), |
| args=[ onosSetName, addValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addResults = main.TRUE |
| for i in range( numControllers ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addResults = main.FALSE |
| else: |
| # unexpected result |
| addResults = main.FALSE |
| if addResults != main.TRUE: |
| main.log.error( "Error executing set add" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addResults = addResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addResults, |
| onpass="Set add correct", |
| onfail="Set add was incorrect" ) |
| |
| main.step( "Distributed Set addAll()" ) |
| onosSet.update( addAllValue.split() ) |
| addResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestAdd, |
| name="setTestAddAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addAllResults = main.TRUE |
| for i in range( numControllers ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addAllResults = main.FALSE |
| else: |
| # unexpected result |
| addAllResults = main.FALSE |
| if addAllResults != main.TRUE: |
| main.log.error( "Error executing set addAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addAllResults = addAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addAllResults, |
| onpass="Set addAll correct", |
| onfail="Set addAll was incorrect" ) |
| |
| main.step( "Distributed Set contains()" ) |
| containsResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setContains-" + str( i ), |
| args=[ onosSetName ], |
| kwargs={ "values": addValue } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| # NOTE: This is the tuple |
| containsResponses.append( t.result ) |
| |
| containsResults = main.TRUE |
| for i in range( numControllers ): |
| if containsResponses[ i ] == main.ERROR: |
| containsResults = main.FALSE |
| else: |
| containsResults = containsResults and\ |
| containsResponses[ i ][ 1 ] |
| utilities.assert_equals( expect=main.TRUE, |
| actual=containsResults, |
| onpass="Set contains is functional", |
| onfail="Set contains failed" ) |
| |
| main.step( "Distributed Set containsAll()" ) |
| containsAllResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setContainsAll-" + str( i ), |
| args=[ onosSetName ], |
| kwargs={ "values": addAllValue } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| # NOTE: This is the tuple |
| containsAllResponses.append( t.result ) |
| |
| containsAllResults = main.TRUE |
| for i in range( numControllers ): |
| if containsResponses[ i ] == main.ERROR: |
| containsResults = main.FALSE |
| else: |
| containsResults = containsResults and\ |
| containsResponses[ i ][ 1 ] |
| utilities.assert_equals( expect=main.TRUE, |
| actual=containsAllResults, |
| onpass="Set containsAll is functional", |
| onfail="Set containsAll failed" ) |
| |
| main.step( "Distributed Set remove()" ) |
| onosSet.remove( addValue ) |
| removeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestRemove, |
| name="setTestRemove-" + str( i ), |
| args=[ onosSetName, addValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| removeResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| removeResults = main.TRUE |
| for i in range( numControllers ): |
| if removeResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif removeResponses[ i ] == main.FALSE: |
| # not in set, probably fine |
| pass |
| elif removeResponses[ i ] == main.ERROR: |
| # Error in execution |
| removeResults = main.FALSE |
| else: |
| # unexpected result |
| removeResults = main.FALSE |
| if removeResults != main.TRUE: |
| main.log.error( "Error executing set remove" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| removeResults = removeResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=removeResults, |
| onpass="Set remove correct", |
| onfail="Set remove was incorrect" ) |
| |
| main.step( "Distributed Set removeAll()" ) |
| onosSet.difference_update( addAllValue.split() ) |
| removeAllResponses = [] |
| threads = [] |
| try: |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestRemove, |
| name="setTestRemoveAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| removeAllResponses.append( t.result ) |
| except Exception, e: |
| main.log.exception(e) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| removeAllResults = main.TRUE |
| for i in range( numControllers ): |
| if removeAllResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif removeAllResponses[ i ] == main.FALSE: |
| # not in set, probably fine |
| pass |
| elif removeAllResponses[ i ] == main.ERROR: |
| # Error in execution |
| removeAllResults = main.FALSE |
| else: |
| # unexpected result |
| removeAllResults = main.FALSE |
| if removeAllResults != main.TRUE: |
| main.log.error( "Error executing set removeAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| removeAllResults = removeAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=removeAllResults, |
| onpass="Set removeAll correct", |
| onfail="Set removeAll was incorrect" ) |
| |
| main.step( "Distributed Set addAll()" ) |
| onosSet.update( addAllValue.split() ) |
| addResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestAdd, |
| name="setTestAddAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addAllResults = main.TRUE |
| for i in range( numControllers ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addAllResults = main.FALSE |
| else: |
| # unexpected result |
| addAllResults = main.FALSE |
| if addAllResults != main.TRUE: |
| main.log.error( "Error executing set addAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addAllResults = addAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addAllResults, |
| onpass="Set addAll correct", |
| onfail="Set addAll was incorrect" ) |
| |
| main.step( "Distributed Set clear()" ) |
| onosSet.clear() |
| clearResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestRemove, |
| name="setTestClear-" + str( i ), |
| args=[ onosSetName, " "], # Values doesn't matter |
| kwargs={ "clear": True } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| clearResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| clearResults = main.TRUE |
| for i in range( numControllers ): |
| if clearResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif clearResponses[ i ] == main.FALSE: |
| # Nothing set, probably fine |
| pass |
| elif clearResponses[ i ] == main.ERROR: |
| # Error in execution |
| clearResults = main.FALSE |
| else: |
| # unexpected result |
| clearResults = main.FALSE |
| if clearResults != main.TRUE: |
| main.log.error( "Error executing set clear" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| clearResults = clearResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=clearResults, |
| onpass="Set clear correct", |
| onfail="Set clear was incorrect" ) |
| |
| main.step( "Distributed Set addAll()" ) |
| onosSet.update( addAllValue.split() ) |
| addResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestAdd, |
| name="setTestAddAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addAllResults = main.TRUE |
| for i in range( numControllers ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addAllResults = main.FALSE |
| else: |
| # unexpected result |
| addAllResults = main.FALSE |
| if addAllResults != main.TRUE: |
| main.log.error( "Error executing set addAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addAllResults = addAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addAllResults, |
| onpass="Set addAll correct", |
| onfail="Set addAll was incorrect" ) |
| |
| main.step( "Distributed Set retain()" ) |
| onosSet.intersection_update( retainValue.split() ) |
| retainResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestRemove, |
| name="setTestRetain-" + str( i ), |
| args=[ onosSetName, retainValue ], |
| kwargs={ "retain": True } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| retainResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| retainResults = main.TRUE |
| for i in range( numControllers ): |
| if retainResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif retainResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif retainResponses[ i ] == main.ERROR: |
| # Error in execution |
| retainResults = main.FALSE |
| else: |
| # unexpected result |
| retainResults = main.FALSE |
| if retainResults != main.TRUE: |
| main.log.error( "Error executing set retain" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( numControllers ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( numControllers ): |
| t = main.Thread( target=CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( numControllers ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + |
| str( size ) + " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| retainResults = retainResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=retainResults, |
| onpass="Set retain correct", |
| onfail="Set retain was incorrect" ) |
| |