| Summary: |
| This test suite consist of basic intent IPv6 functionality testing. |
| The following is an overview of how point-to-point intents are being tested. |
| Steps: |
| - Discover IPv6 hosts with ICMP6 ping |
| - Add point intents |
| - Check intents |
| - Verify flows |
| - ICMP6 ping of all hosts |
| - Reroute |
| - Link down |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Link up |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Verify intents with VLAN-id |
| - Remove intents |
| This test suite includes testing of different types of intents such as |
| host, point, single-to-multi and multi-to-single ( More intent types to |
| add later ). The same steps above is being performed to other type of |
| intents. |
| |
| Required: |
| This test requires Mininet topology file newFuncIntent.py that is in the |
| Dependency folder. You should run the topology file to check for any |
| missing packages. The mininet topology file has different type of hosts |
| including VLAN hosts. Therefore you need to install VLAN module to build |
| the topology correctly. |
| |
| VLAN configuration: |
| Execute command: |
| $ sudo apt-get install vlan |
| Configuration: |
| $ sudo modprobe 8021q |
| NOTE:To make this configuration permanent |
| $ sudo su -c 'echo "8021q" >> /etc/modules' |