| # 2015.03.12 10:22:05 PDT |
| #Embedded file name: ../tests/TopoPerfNextBM/TopoPerfNextBM.py |
| import time |
| import sys |
| import os |
| import re |
| |
| class TopoPerfNextBM: |
| |
| def __init__(self): |
| self.default = '' |
| |
| def CASE1(self, main): |
| """ |
| ONOS startup sequence |
| """ |
| global clusterCount |
| global timeToPost |
| global runNum |
| global jenkinsBuildNumber |
| |
| import time |
| import os |
| |
| clusterCount = 1 |
| timeToPost = time.strftime('%Y-%m-%d %H:%M:%S') |
| runNum = time.strftime('%d%H%M%S') |
| cellName = main.params['ENV']['cellName'] |
| gitPull = main.params['GIT']['autoPull'] |
| checkoutBranch = main.params['GIT']['checkout'] |
| |
| # Get jenkins build number from environment. |
| # This environment variable will only exist when |
| # triggered by a jenkins job |
| try: |
| jenkinsBuildNumber = str(os.environ['BUILD_NUMBER']) |
| main.log.report( 'Jenkins build number: ' + |
| jenkinsBuildNumber ) |
| except KeyError: |
| # Jenkins build number is also used in posting to DB |
| # If this test is not triggered by jenkins, give |
| # it the runNum variable instead, ensuring that |
| # the DB post will recognize it as a non-jenkins run |
| jenkinsBuildNumber = str(runNum) |
| main.log.info( 'Job is not run by jenkins. '+ |
| 'Build number set to: ' + jenkinsBuildNumber) |
| |
| global CLIs |
| CLIs = [] |
| global nodes |
| nodes = [] |
| global nodeIpList |
| nodeIpList = [] |
| for i in range( 1, 8 ): |
| CLIs.append( getattr( main, 'ONOS' + str( i ) + 'cli' ) ) |
| nodes.append( getattr( main, 'ONOS' + str( i ) ) ) |
| nodeIpList.append( main.params[ 'CTRL' ][ 'ip'+str(i) ] ) |
| |
| MN1Ip = main.params['MN']['ip1'] |
| BENCHIp = main.params['BENCH']['ip'] |
| cellFeatures = main.params['ENV']['cellFeatures'] |
| topoCfgFile = main.params['TEST']['topoConfigFile'] |
| topoCfgName = main.params['TEST']['topoConfigName'] |
| portEventResultPath = main.params['DB']['portEventResultPath'] |
| switchEventResultPath = main.params['DB']['switchEventResultPath'] |
| mvnCleanInstall = main.params['TEST']['mci'] |
| |
| main.case('Setting up test environment') |
| |
| # NOTE: Below is deprecated after new way to install features |
| #main.log.info('Copying topology event accumulator config' + |
| # ' to ONOS /package/etc') |
| #main.ONOSbench.handle.sendline('cp ~/' + |
| # topoCfgFile + ' ~/ONOS/tools/package/etc/' + |
| # topoCfgName) |
| #main.ONOSbench.handle.expect('\\$') |
| |
| main.log.report('Setting up test environment') |
| |
| main.step('Starting mininet topology ') |
| main.Mininet1.startNet() |
| |
| main.step('Cleaning previously installed ONOS if any') |
| # Nodes 2 ~ 7 |
| for i in range( 1, 7 ): |
| main.ONOSbench.onosUninstall(nodeIp=nodeIpList[i]) |
| |
| main.step('Clearing previous DB log file') |
| |
| fPortLog = open(portEventResultPath, 'w') |
| fPortLog.write('') |
| fPortLog.close() |
| fSwitchLog = open(switchEventResultPath, 'w') |
| fSwitchLog.write('') |
| fSwitchLog.close() |
| |
| main.step('Creating cell file') |
| cellFileResult = main.ONOSbench.createCellFile( |
| BENCHIp, cellName, MN1Ip, cellFeatures, nodeIpList[0]) |
| |
| main.step('Applying cell file to environment') |
| cellApplyResult = main.ONOSbench.setCell(cellName) |
| verifyCellResult = main.ONOSbench.verifyCell() |
| |
| main.step('Git checkout and pull ' + checkoutBranch) |
| if gitPull == 'on': |
| checkoutResult = main.TRUE |
| pullResult = main.ONOSbench.gitPull() |
| else: |
| checkoutResult = main.TRUE |
| pullResult = main.TRUE |
| main.log.info('Skipped git checkout and pull') |
| |
| main.log.report('Commit information - ') |
| main.ONOSbench.getVersion(report=True) |
| main.step('Using mvn clean & install') |
| if mvnCleanInstall == 'on': |
| mvnResult = main.ONOSbench.cleanInstall() |
| elif mvnCleanInstall == 'off': |
| main.log.info('mci turned off by settings') |
| mvnResult = main.TRUE |
| main.step('Set cell for ONOS cli env') |
| CLIs[0].setCell(cellName) |
| |
| main.step('Creating ONOS package') |
| packageResult = main.ONOSbench.onosPackage() |
| |
| main.step('Installing ONOS package') |
| install1Result = main.ONOSbench.onosInstall(node=nodeIpList[0]) |
| |
| time.sleep(10) |
| |
| main.step('Start onos cli') |
| cli1 = CLIs[0].startOnosCli(nodeIpList[0]) |
| |
| main.step( 'activating essential applications' ) |
| CLIs[0].activateApp( 'org.onosproject.metrics' ) |
| CLIs[0].activateApp( 'org.onosproject.openflow' ) |
| |
| main.step( 'Configuring application parameters' ) |
| |
| configName = 'org.onosproject.net.topology.impl.DefaultTopologyProvider' |
| configParam = 'maxEvents 1' |
| main.ONOSbench.onosCfgSet( nodeIpList[0], configName, configParam ) |
| configParam = 'maxBatchMs 0' |
| main.ONOSbench.onosCfgSet( nodeIpList[0], configName, configParam ) |
| configParam = 'maxIdleMs 0' |
| main.ONOSbench.onosCfgSet( nodeIpList[0], configName, configParam ) |
| |
| utilities.assert_equals(expect=main.TRUE, |
| actual=cellFileResult and cellApplyResult and\ |
| verifyCellResult and checkoutResult and\ |
| pullResult and mvnResult and\ |
| install1Result, |
| onpass='Test Environment setup successful', |
| onfail='Failed to setup test environment') |
| |
| def CASE2(self, main): |
| """ |
| Assign s1 to ONOS1 and measure latency |
| |
| There are 4 levels of latency measurements to this test: |
| 1 ) End-to-end measurement: Complete end-to-end measurement |
| from TCP ( SYN/ACK ) handshake to Graph change |
| 2 ) OFP-to-graph measurement: 'ONOS processing' snippet of |
| measurement from OFP Vendor message to Graph change |
| 3 ) OFP-to-device measurement: 'ONOS processing without |
| graph change' snippet of measurement from OFP vendor |
| message to Device change timestamp |
| 4 ) T0-to-device measurement: Measurement that includes |
| the switch handshake to devices timestamp without |
| the graph view change. ( TCP handshake -> Device |
| change ) |
| """ |
| import time |
| import subprocess |
| import json |
| import requests |
| import os |
| import numpy |
| |
| ONOSUser = main.params['CTRL']['user'] |
| defaultSwPort = main.params['CTRL']['port1'] |
| numIter = main.params['TEST']['numIter'] |
| iterIgnore = int(main.params['TEST']['iterIgnore']) |
| |
| deviceTimestampKey = main.params['JSON']['deviceTimestamp'] |
| graphTimestampKey = main.params['JSON']['graphTimestamp'] |
| |
| debugMode = main.params['TEST']['debugMode'] |
| onosLog = main.params['TEST']['onosLogFile'] |
| resultPath = main.params['DB']['switchEventResultPath'] |
| thresholdStr = main.params['TEST']['singleSwThreshold'] |
| thresholdObj = thresholdStr.split(',') |
| thresholdMin = float(thresholdObj[0]) |
| thresholdMax = float(thresholdObj[1]) |
| |
| # Look for 'role-request' messages, |
| # which replaces the 'vendor' messages previously seen |
| # on OVS 2.0.1 |
| tsharkTcpString = main.params[ 'TSHARK' ][ 'tcpSynAck' ] |
| tsharkFeatureReply = main.params[ 'TSHARK' ][ 'featureReply' ] |
| tsharkRoleRequest = main.params[ 'TSHARK' ][ 'roleRequest' ] |
| tsharkOfString = main.params[ 'TSHARK' ][ 'ofpRoleReply' ] |
| tsharkFinAckSequence = main.params[ 'TSHARK' ][ 'finAckSequence' ] |
| |
| tsharkOfOutput = '/tmp/tshark_of_topo.txt' |
| tsharkTcpOutput = '/tmp/tshark_tcp_topo.txt' |
| tsharkRoleOutput = '/tmp/tshark_role_request.txt' |
| tsharkFeatureOutput = '/tmp/tshark_feature_reply.txt' |
| tsharkFinAckOutput = '/tmp/tshark_fin_ack.txt' |
| |
| # Switch connect measurement list |
| # TCP Syn/Ack -> Feature Reply latency collection for each node |
| tcpToFeatureLatNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| # Feature Reply -> Role Request latency collection for each node |
| featureToRoleRequestLatNodeIter = numpy.zeros((clusterCount, |
| int(numIter))) |
| # Role Request -> Role Reply latency collection for each node |
| roleRequestToRoleReplyLatNodeIter = numpy.zeros((clusterCount, |
| int(numIter))) |
| # Role Reply -> Device Update latency collection for each node |
| roleReplyToDeviceLatNodeIter = numpy.zeros((clusterCount, |
| int(numIter))) |
| # Device Update -> Graph Update latency collection for each node |
| deviceToGraphLatNodeIter = numpy.zeros((clusterCount, |
| int(numIter))) |
| endToEndLatNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| |
| # Switch disconnect measurement lists |
| # Mininet Fin / Ack -> Mininet Ack |
| finAckTransactionLatNodeIter = numpy.zeros((clusterCount, |
| int(numIter))) |
| # Mininet Ack -> Device Event |
| ackToDeviceLatNodeIter = numpy.zeros((clusterCount, |
| int(numIter))) |
| # Device event -> Graph event |
| deviceToGraphDiscLatNodeIter = numpy.zeros((clusterCount, |
| int(numIter))) |
| endToEndDiscLatNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| |
| assertion = main.TRUE |
| localTime = time.strftime('%x %X') |
| localTime = localTime.replace('/', '') |
| localTime = localTime.replace(' ', '_') |
| localTime = localTime.replace(':', '') |
| |
| if debugMode == 'on': |
| main.ONOS1.tsharkPcap('eth0', |
| '/tmp/single_sw_lat_pcap_' + localTime) |
| main.log.info('Debug mode is on') |
| main.log.report('Latency of adding one switch to controller') |
| main.log.report('First ' + str(iterIgnore) + |
| ' iterations ignored' + ' for jvm warmup time') |
| main.log.report('Total iterations of test: ' + str(numIter)) |
| |
| for i in range(0, int(numIter)): |
| main.log.info('Starting tshark capture') |
| main.ONOS1.tsharkGrep(tsharkTcpString, tsharkTcpOutput) |
| main.ONOS1.tsharkGrep(tsharkOfString, tsharkOfOutput) |
| main.ONOS1.tsharkGrep(tsharkRoleRequest, tsharkRoleOutput) |
| main.ONOS1.tsharkGrep(tsharkFeatureReply, tsharkFeatureOutput) |
| |
| time.sleep(10) |
| |
| main.log.info('Assigning s3 to controller') |
| main.Mininet1.assignSwController(sw='3', |
| ip1=nodeIpList[0], port1=defaultSwPort) |
| |
| time.sleep(10) |
| |
| main.log.info('Stopping all Tshark processes') |
| main.ONOS1.tsharkStop() |
| |
| main.log.info('Copying over tshark files') |
| os.system('scp ' + ONOSUser + '@' + nodeIpList[0] + |
| ':' + tsharkTcpOutput + ' /tmp/') |
| os.system('scp ' + ONOSUser + '@' + nodeIpList[0] + |
| ':' + tsharkRoleOutput + ' /tmp/') |
| os.system('scp ' + ONOSUser + '@' + nodeIpList[0] + |
| ':' + tsharkFeatureOutput + ' /tmp/') |
| os.system('scp ' + ONOSUser + '@' + |
| nodeIpList[0] + ':' + tsharkOfOutput + ' /tmp/') |
| |
| # Get tcp syn / ack output |
| time.sleep(5) |
| tcpFile = open(tsharkTcpOutput, 'r') |
| tempText = tcpFile.readline() |
| tempText = tempText.split(' ') |
| main.log.info('Object read in from TCP capture: ' + |
| str(tempText)) |
| |
| if len(tempText) > 1: |
| t0Tcp = float(tempText[1]) * 1000.0 |
| else: |
| main.log.error('Tshark output file for TCP' + |
| ' returned unexpected results') |
| t0Tcp = 0 |
| assertion = main.FALSE |
| tcpFile.close() |
| |
| # Get Role reply output |
| time.sleep(5) |
| ofFile = open(tsharkOfOutput, 'r') |
| lineOfp = '' |
| while True: |
| tempText = ofFile.readline() |
| if tempText != '': |
| lineOfp = tempText |
| else: |
| break |
| obj = lineOfp.split(' ') |
| main.log.info('Object read in from OFP capture: ' + |
| str(lineOfp)) |
| if len(obj) > 1: |
| t0Ofp = float(obj[1]) * 1000.0 |
| else: |
| main.log.error('Tshark output file for OFP' + |
| ' returned unexpected results') |
| t0Ofp = 0 |
| assertion = main.FALSE |
| ofFile.close() |
| |
| # Get role request output |
| roleFile = open(tsharkRoleOutput, 'r') |
| tempText = roleFile.readline() |
| tempText = tempText.split(' ') |
| if len(tempText) > 1: |
| main.log.info('Object read in from role request capture:' + |
| str(tempText)) |
| roleTimestamp = float(tempText[1]) * 1000.0 |
| else: |
| main.log.error('Tshark output file for role request' + |
| ' returned unexpected results') |
| timeRoleRequest = 0 |
| assertion = main.FALSE |
| roleFile.close() |
| |
| # Get feature reply output |
| featureFile = open(tsharkFeatureOutput, 'r') |
| tempText = featureFile.readline() |
| tempText = tempText.split(' ') |
| if len(tempText) > 1: |
| main.log.info('Object read in from feature reply capture: '+ |
| str(tempText)) |
| featureTimestamp = float(tempText[1]) * 1000.0 |
| else: |
| main.log.error('Tshark output file for feature reply' + |
| ' returned unexpected results') |
| timeFeatureReply = 0 |
| assertion = main.FALSE |
| featureFile.close() |
| |
| # TODO: calculate feature reply, role request times |
| # stack measurements correctly and report |
| |
| #TODO: Refactor in progress |
| |
| for node in range(0, clusterCount): |
| nodeNum = node+1 |
| metricsSwUp = CLIs[node].topologyEventsMetrics |
| jsonStr = metricsSwUp() |
| jsonObj = json.loads(jsonStr) |
| if jsonObj: |
| graphTimestamp = jsonObj[graphTimestampKey]['value'] |
| deviceTimestamp = jsonObj[deviceTimestampKey]['value'] |
| else: |
| main.log.error( "Unexpected JSON object" ) |
| # If we could not obtain the JSON object, |
| # set the timestamps to 0, which will be |
| # excluded from the measurement later on |
| # (realized as invalid) |
| graphTimestamp = 0 |
| deviceTimestamp = 0 |
| |
| endToEnd = int(graphTimestamp) - int(t0Tcp) |
| |
| # Below are measurement breakdowns of the end-to-end |
| # measurement. |
| tcpToFeature = int(featureTimestamp) - int(t0Tcp) |
| featureToRole = int(roleTimestamp) - int(featureTimestamp) |
| roleToOfp = int(t0Ofp) - int(roleTimestamp) |
| ofpToDevice = int(deviceTimestamp) - int(t0Ofp) |
| deviceToGraph = float(graphTimestamp) - float(deviceTimestamp) |
| |
| if endToEnd > thresholdMin and\ |
| endToEnd < thresholdMax and i >= iterIgnore: |
| endToEndLatNodeIter[node][i] = endToEnd |
| main.log.info("ONOS "+str(nodeNum)+ " end-to-end: "+ |
| str(endToEnd) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ " end-to-end "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if tcpToFeature > thresholdMin and\ |
| tcpToFeature < thresholdMax and i >= iterIgnore: |
| tcpToFeatureLatNodeIter[node][i] = tcpToFeature |
| main.log.info("ONOS "+str(nodeNum)+ " tcp-to-feature: "+ |
| str(tcpToFeature) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ " tcp-to-feature "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if featureToRole > thresholdMin and\ |
| featureToRole < thresholdMax and i >= iterIgnore: |
| featureToRoleRequestLatNodeIter[node][i] = featureToRole |
| main.log.info("ONOS "+str(nodeNum)+ " feature-to-role: "+ |
| str(featureToRole) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ " feature-to-role "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if roleToOfp > thresholdMin and\ |
| roleToOfp < thresholdMax and i >= iterIgnore: |
| roleRequestToRoleReplyLatNodeIter[node][i] = roleToOfp |
| main.log.info("ONOS "+str(nodeNum)+ " role-to-reply: "+ |
| str(roleToOfp) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ " role-to-reply "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if ofpToDevice > thresholdMin and\ |
| ofpToDevice < thresholdMax and i >= iterIgnore: |
| roleReplyToDeviceLatNodeIter[node][i] = ofpToDevice |
| main.log.info("ONOS "+str(nodeNum)+ " reply-to-device: "+ |
| str(ofpToDevice) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ " role-to-reply "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if deviceToGraph > thresholdMin and\ |
| deviceToGraph < thresholdMax and i >= iterIgnore: |
| deviceToGraphLatNodeIter[node][i] = deviceToGraph |
| main.log.info("ONOS "+str(nodeNum)+ " device-to-graph: "+ |
| str(deviceToGraph) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ " device-to-graph "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| # ******************** |
| time.sleep(5) |
| |
| # Get device id to remove |
| deviceIdJsonStr = main.ONOS1cli.devices() |
| |
| main.log.info( "Device obj obtained: " + str(deviceIdJsonStr) ) |
| deviceId = json.loads(deviceIdJsonStr) |
| |
| deviceList = [] |
| for device in deviceId: |
| deviceList.append(device['id']) |
| |
| # Measure switch down metrics |
| # TCP FIN/ACK -> TCP FIN |
| # TCP FIN -> Device Event |
| # Device Event -> Graph Event |
| # Capture switch down FIN / ACK packets |
| |
| # The -A 1 grep option allows us to grab 1 extra line after the |
| # last tshark output grepped originally |
| main.ONOS1.tsharkGrep( tsharkFinAckSequence, tsharkFinAckOutput, |
| grepOptions = '-A 1' ) |
| |
| time.sleep( 5 ) |
| |
| removeJsonList = [] |
| |
| main.step('Remove switch from controller') |
| main.Mininet1.deleteSwController('s3') |
| firstDevice = deviceList[0] |
| main.log.info( "Removing device " +str(firstDevice)+ |
| " from ONOS" ) |
| |
| time.sleep( 5 ) |
| |
| # We need to get metrics before removing |
| # device from the store below. |
| for node in range(0, clusterCount): |
| metricsSwDown = CLIs[node].topologyEventsMetrics |
| jsonStr = metricsSwDown() |
| removeJsonList.append( json.loads(jsonStr) ) |
| |
| #if deviceId: |
| main.ONOS1cli.deviceRemove(firstDevice) |
| |
| main.ONOS1.tsharkStop() |
| |
| main.log.info('Copying over tshark files') |
| os.system('scp ' + ONOSUser + '@' + nodeIpList[0] + |
| ':' + tsharkFinAckOutput + ' /tmp/') |
| |
| time.sleep( 10 ) |
| finAckOutputList = [] |
| with open(tsharkFinAckOutput, 'r') as f: |
| tempLine = f.readlines() |
| main.log.info('Object read in from FinAck capture: ' + |
| str(tempLine)) |
| |
| index = 1 |
| for line in tempLine: |
| obj = line.split(' ') |
| |
| if len(obj) > 1: |
| if index == 1: |
| tFinAck = float(obj[1]) * 1000.0 |
| elif index == 3: |
| tAck = float(obj[1]) * 1000.0 |
| else: |
| main.log.error('Tshark output file for OFP' + |
| ' returned unexpected results') |
| tFinAck = 0 |
| tAck = 0 |
| assertion = main.FALSE |
| |
| index = index+1 |
| |
| # with open() as f takes care of closing file |
| |
| time.sleep(5) |
| |
| for node in range(0, clusterCount): |
| nodeNum = node+1 |
| jsonObj = removeJsonList[node] |
| if jsonObj: |
| graphTimestamp = jsonObj[graphTimestampKey]['value'] |
| deviceTimestamp = jsonObj[deviceTimestampKey]['value'] |
| main.log.info("Graph timestamp: "+str(graphTimestamp)) |
| main.log.info("Device timestamp: "+str(deviceTimestamp)) |
| else: |
| main.log.error( "Unexpected JSON object" ) |
| # If we could not obtain the JSON object, |
| # set the timestamps to 0, which will be |
| # excluded from the measurement later on |
| # (realized as invalid) |
| graphTimestamp = 0 |
| deviceTimestamp = 0 |
| |
| finAckTransaction = int(tAck) - int(tFinAck) |
| ackToDevice = int(deviceTimestamp) - int(tAck) |
| deviceToGraph = int(graphTimestamp) - int(deviceTimestamp) |
| endToEndDisc = int(graphTimestamp) - int(tFinAck) |
| |
| if endToEndDisc > thresholdMin and\ |
| endToEndDisc < thresholdMax and i >= iterIgnore: |
| endToEndDiscLatNodeIter[node][i] = endToEndDisc |
| main.log.info("ONOS "+str(nodeNum) + |
| "end-to-end disconnection: "+ |
| str(endToEndDisc) + " ms" ) |
| else: |
| main.log.info("ONOS " + str(nodeNum) + |
| " end-to-end disconnection "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if finAckTransaction > thresholdMin and\ |
| finAckTransaction < thresholdMax and i >= iterIgnore: |
| finAckTransactionLatNodeIter[node][i] = finAckTransaction |
| main.log.info("ONOS "+str(nodeNum)+ |
| " fin/ack transaction: "+ |
| str(finAckTransaction) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " fin/ack transaction "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if ackToDevice > thresholdMin and\ |
| ackToDevice < thresholdMax and i >= iterIgnore: |
| ackToDeviceLatNodeIter[node][i] = ackToDevice |
| main.log.info("ONOS "+str(nodeNum)+ |
| " ack-to-device: "+ |
| str(ackToDevice) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " ack-to-device "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| if deviceToGraph > thresholdMin and\ |
| deviceToGraph < thresholdMax and i >= iterIgnore: |
| deviceToGraphDiscLatNodeIter[node][i] = deviceToGraph |
| main.log.info("ONOS "+str(nodeNum)+ |
| " device-to-graph disconnect: "+ |
| str(deviceToGraph) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " device-to-graph disconnect "+ |
| "measurement ignored due to excess in "+ |
| "threshold or premature iteration") |
| |
| endToEndAvg = 0 |
| ofpToGraphAvg = 0 |
| dbCmdList = [] |
| for node in range(0, clusterCount): |
| # List of latency for each node |
| endToEndList = [] |
| tcpToFeatureList = [] |
| featureToRoleList = [] |
| roleToOfpList = [] |
| ofpToDeviceList = [] |
| deviceToGraphList = [] |
| |
| finAckTransactionList = [] |
| ackToDeviceList = [] |
| deviceToGraphDiscList = [] |
| endToEndDiscList = [] |
| |
| # LatNodeIter 2d arrays contain all iteration latency |
| # for each node of the current scale cluster size |
| # Switch connection measurements |
| # Set further acceptance criteria for measurements |
| # here if you would like to filter reporting results |
| for item in endToEndLatNodeIter[node]: |
| if item > 0.0: |
| endToEndList.append(item) |
| |
| for item in tcpToFeatureLatNodeIter[node]: |
| if item > 0.0: |
| tcpToFeatureList.append(item) |
| |
| for item in featureToRoleRequestLatNodeIter[node]: |
| if item > 0.0: |
| featureToRoleList.append(item) |
| |
| for item in roleRequestToRoleReplyLatNodeIter[node]: |
| if item > 0.0: |
| roleToOfpList.append(item) |
| |
| for item in roleReplyToDeviceLatNodeIter[node]: |
| if item > 0.0: |
| tcpToFeatureList.append(item) |
| |
| for item in featureToRoleRequestLatNodeIter[node]: |
| if item > 0.0: |
| featureToRoleList.append(item) |
| |
| for item in deviceToGraphLatNodeIter[node]: |
| if item > 0.0: |
| deviceToGraphList.append(item) |
| |
| # Switch disconnect measurements |
| for item in endToEndDiscLatNodeIter[node]: |
| if item > 0.0: |
| endToEndDiscList.append(item) |
| |
| for item in finAckTransactionLatNodeIter[node]: |
| if item > 0.0: |
| finAckTransactionList.append(item) |
| |
| for item in ackToDeviceLatNodeIter[node]: |
| if item > 0.0: |
| ackToDeviceList.append(item) |
| |
| for item in deviceToGraphDiscLatNodeIter[node]: |
| if item > 0.0: |
| deviceToGraphDiscList.append(item) |
| |
| endToEndAvg = round(numpy.mean(endToEndList), 2) |
| endToEndStdDev = round(numpy.std(endToEndList), 2) |
| |
| tcpToFeatureAvg = round(numpy.mean(tcpToFeatureList), 2) |
| tcpToFeatureStdDev = round(numpy.std(tcpToFeatureList), 2) |
| |
| featureToRoleAvg = round(numpy.mean(featureToRoleList), 2) |
| featureToRoleStdDev = round(numpy.std(featureToRoleList), 2) |
| |
| roleToOfpAvg = round(numpy.mean(roleToOfpList), 2) |
| roleToOfpStdDev = round(numpy.std(roleToOfpList), 2) |
| |
| ofpToDeviceAvg = round(numpy.mean(ofpToDeviceList), 2) |
| ofpToDeviceStdDev = round(numpy.std(ofpToDeviceList), 2) |
| |
| deviceToGraphAvg = round(numpy.mean(deviceToGraphList), 2) |
| deviceToGraphStdDev = round(numpy.std(deviceToGraphList), 2) |
| |
| endToEndDiscAvg = round(numpy.mean(endToEndDiscList), 2) |
| endToEndDiscStdDev = round(numpy.std(endToEndDiscList), 2) |
| |
| finAckAvg = round(numpy.mean(finAckTransactionList), 2) |
| finAckStdDev = round(numpy.std(finAckTransactionList), 2) |
| |
| ackToDeviceAvg = round(numpy.mean(ackToDeviceList), 2) |
| ackToDeviceStdDev = round(numpy.std(ackToDeviceList), 2) |
| |
| deviceToGraphDiscAvg = round(numpy.mean(deviceToGraphDiscList), 2) |
| deviceToGraphDiscStdDev = round(numpy.std(deviceToGraphDiscList), 2) |
| |
| main.log.report(' - Node ' + str(node + 1) + ' Summary - ') |
| main.log.report(' - Switch Connection Statistics - ') |
| |
| main.log.report(' End-to-end Avg: ' + str(endToEndAvg) + |
| ' ms' + ' End-to-end Std dev: ' + |
| str(endToEndStdDev) + ' ms') |
| |
| main.log.report(' Tcp-to-feature-reply Avg: ' + |
| str(tcpToFeatureAvg) + ' ms') |
| main.log.report(' Tcp-to-feature-reply Std dev: '+ |
| str(tcpToFeatureStdDev) + ' ms') |
| |
| main.log.report(' Feature-reply-to-role-request Avg: ' + |
| str(featureToRoleAvg) + ' ms') |
| main.log.report(' Feature-reply-to-role-request Std Dev: ' + |
| str(featureToRoleStdDev) + ' ms') |
| |
| main.log.report(' Role-request-to-role-reply Avg: ' + |
| str(roleToOfpAvg) +' ms') |
| main.log.report(' Role-request-to-role-reply Std dev: ' + |
| str(roleToOfpStdDev) + ' ms') |
| |
| main.log.report(' Role-reply-to-device Avg: ' + |
| str(ofpToDeviceAvg) +' ms') |
| main.log.report(' Role-reply-to-device Std dev: ' + |
| str(ofpToDeviceStdDev) + ' ms') |
| |
| main.log.report(' Device-to-graph Avg: ' + |
| str(deviceToGraphAvg) + ' ms') |
| main.log.report( 'Device-to-graph Std dev: ' + |
| str(deviceToGraphStdDev) + ' ms') |
| |
| main.log.report(' - Switch Disconnection Statistics - ') |
| main.log.report(' End-to-end switch disconnect Avg: ' + |
| str(endToEndDiscAvg) + ' ms') |
| main.log.report(' End-to-end switch disconnect Std dev: ' + |
| str(endToEndDiscStdDev) + ' ms') |
| main.log.report(' Fin/Ack-to-Ack Avg: ' + str(finAckAvg) + ' ms') |
| main.log.report(' Fin/Ack-to-Ack Std dev: ' + |
| str(finAckStdDev) + ' ms') |
| |
| main.log.report(' Ack-to-device Avg: ' + str(ackToDeviceAvg) + |
| ' ms') |
| main.log.report(' Ack-to-device Std dev: ' + str(ackToDeviceStdDev) + |
| ' ms') |
| |
| main.log.report(' Device-to-graph (disconnect) Avg: ' + |
| str(deviceToGraphDiscAvg) + ' ms') |
| main.log.report(' Device-to-graph (disconnect) Std dev: ' + |
| str(deviceToGraphDiscStdDev) + ' ms') |
| |
| dbCmdList.append( |
| "INSERT INTO switch_latency_tests VALUES('" + |
| timeToPost + "','switch_latency_results'," + |
| jenkinsBuildNumber + ',' + str(clusterCount) + ",'baremetal" + |
| str(node + 1) + "'," + str(endToEndAvg) + ',' + |
| str(endToEndStdDev) + ',0,0);') |
| |
| if debugMode == 'on': |
| main.ONOS1.cpLogsToDir('/opt/onos/log/karaf.log', |
| '/tmp/', copyFileName='sw_lat_karaf') |
| fResult = open(resultPath, 'a') |
| for line in dbCmdList: |
| if line: |
| fResult.write(line + '\n') |
| |
| fResult.close() |
| assertion = main.TRUE |
| utilities.assert_equals(expect=main.TRUE, actual=assertion, |
| onpass='Switch latency test successful', |
| onfail='Switch latency test failed') |
| |
| def CASE3(self, main): |
| """ |
| Bring port up / down and measure latency. |
| Port enable / disable is simulated by ifconfig up / down |
| |
| In ONOS-next, we must ensure that the port we are |
| manipulating is connected to another switch with a valid |
| connection. Otherwise, graph view will not be updated. |
| """ |
| global timeToPost |
| import time |
| import subprocess |
| import os |
| import requests |
| import json |
| import numpy |
| ONOS1Ip = main.params['CTRL']['ip1'] |
| ONOS2Ip = main.params['CTRL']['ip2'] |
| ONOS3Ip = main.params['CTRL']['ip3'] |
| ONOSUser = main.params['CTRL']['user'] |
| defaultSwPort = main.params['CTRL']['port1'] |
| assertion = main.TRUE |
| numIter = main.params['TEST']['numIter'] |
| iterIgnore = int(main.params['TEST']['iterIgnore']) |
| |
| deviceTimestampKey = main.params['JSON']['deviceTimestamp'] |
| graphTimestampKey = main.params['JSON']['graphTimestamp'] |
| linkTimestampKey = main.params['JSON']['linkTimestamp'] |
| |
| tsharkPortUp = '/tmp/tshark_port_up.txt' |
| tsharkPortDown = '/tmp/tshark_port_down.txt' |
| tsharkPortStatus = main.params[ 'TSHARK' ][ 'ofpPortStatus' ] |
| |
| debugMode = main.params['TEST']['debugMode'] |
| postToDB = main.params['DB']['postToDB'] |
| resultPath = main.params['DB']['portEventResultPath'] |
| timeToPost = time.strftime('%Y-%m-%d %H:%M:%S') |
| localTime = time.strftime('%x %X') |
| localTime = localTime.replace('/', '') |
| localTime = localTime.replace(' ', '_') |
| localTime = localTime.replace(':', '') |
| |
| if debugMode == 'on': |
| main.ONOS1.tsharkPcap('eth0', '/tmp/port_lat_pcap_' + localTime) |
| |
| upThresholdStr = main.params['TEST']['portUpThreshold'] |
| downThresholdStr = main.params['TEST']['portDownThreshold'] |
| upThresholdObj = upThresholdStr.split(',') |
| downThresholdObj = downThresholdStr.split(',') |
| upThresholdMin = int(upThresholdObj[0]) |
| upThresholdMax = int(upThresholdObj[1]) |
| downThresholdMin = int(downThresholdObj[0]) |
| downThresholdMax = int(downThresholdObj[1]) |
| |
| interfaceConfig = 's1-eth1' |
| main.log.report('Port enable / disable latency') |
| main.log.report('Simulated by ifconfig up / down') |
| main.log.report('Total iterations of test: ' + str(numIter)) |
| main.step('Assign switches s1 and s2 to controller 1') |
| |
| main.Mininet1.assignSwController(sw='1', |
| ip1=ONOS1Ip, port1=defaultSwPort) |
| main.Mininet1.assignSwController(sw='2', |
| ip1=ONOS1Ip, port1=defaultSwPort) |
| |
| time.sleep(15) |
| |
| portUpDeviceToOfpList = [] |
| portUpGraphToOfpList = [] |
| portDownDeviceToOfpList = [] |
| portDownGraphToOfpList = [] |
| |
| portUpDevNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| portUpGraphNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| portUpLinkLatNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| portDownDevNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| portDownGraphNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| portDownLinkNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| portUpLinkNodeIter = numpy.zeros((clusterCount, int(numIter))) |
| |
| for i in range(0, int(numIter)): |
| main.step('Starting wireshark capture for port status down') |
| main.ONOS1.tsharkGrep(tsharkPortStatus, tsharkPortDown) |
| |
| time.sleep(5) |
| |
| main.step('Disable port: ' + interfaceConfig) |
| main.Mininet1.handle.sendline('sh ifconfig ' + |
| interfaceConfig + ' down') |
| main.Mininet1.handle.expect('mininet>') |
| |
| time.sleep(3) |
| |
| main.ONOS1.tsharkStop() |
| |
| os.system('scp ' + ONOSUser + '@' + ONOS1Ip + ':' + |
| tsharkPortDown + ' /tmp/') |
| |
| fPortDown = open(tsharkPortDown, 'r') |
| fLine = fPortDown.readline() |
| objDown = fLine.split(' ') |
| if len(fLine) > 0: |
| timestampBeginPtDown = int(float(objDown[1]) * 1000) |
| # At times, tshark reports timestamp at the 3rd |
| # index of the array. If initial readings were |
| # unlike the epoch timestamp, then check the 3rd |
| # index and set that as a timestamp |
| if timestampBeginPtDown < 1400000000000: |
| timestampBeginPtDown = int(float(objDown[2]) * 1000) |
| # If there are any suspicion of invalid results |
| # check this reported value |
| main.log.info('Port down begin timestamp: ' + |
| str(timestampBeginPtDown)) |
| else: |
| main.log.info('Tshark output file returned unexpected' + |
| ' results: ' + str(objDown)) |
| timestampBeginPtDown = 0 |
| fPortDown.close() |
| |
| for node in range(0, clusterCount): |
| nodeNum = node+1 |
| metricsDown = CLIs[node].topologyEventsMetrics |
| jsonStrDown = metricsDown() |
| jsonObj = json.loads(jsonStrDown) |
| |
| if jsonObj: |
| graphTimestamp = jsonObj[graphTimestampKey]['value'] |
| deviceTimestamp = jsonObj[deviceTimestampKey]['value'] |
| linkTimestamp = jsonObj[linkTimestampKey]['value'] |
| else: |
| main.log.error( "Unexpected json object" ) |
| graphTimestamp = 0 |
| deviceTimestamp = 0 |
| linkTimestamp = 0 |
| |
| ptDownGraphToOfp = int(graphTimestamp) - int(timestampBeginPtDown) |
| ptDownDeviceToOfp = int(deviceTimestamp) - int(timestampBeginPtDown) |
| ptDownLinkToOfp = int(linkTimestamp) - int(timestampBeginPtDown) |
| |
| if ptDownGraphToOfp > downThresholdMin and\ |
| ptDownGraphToOfp < downThresholdMax and i >= iterIgnore: |
| portDownGraphNodeIter[node][i] = ptDownGraphToOfp |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port down graph-to-ofp: "+ |
| str(ptDownGraphToOfp) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port down graph-to-ofp ignored"+ |
| " due to excess in threshold or premature iteration") |
| |
| if ptDownDeviceToOfp > downThresholdMin and\ |
| ptDownDeviceToOfp < downThresholdMax and i >= iterIgnore: |
| portDownDevNodeIter[node][i] = ptDownDeviceToOfp |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port down device-to-ofp: "+ |
| str(ptDownDeviceToOfp) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port down device-to-ofp ignored"+ |
| " due to excess in threshold or premature iteration") |
| |
| if ptDownLinkToOfp > downThresholdMin and\ |
| ptDownLinkToOfp < downThresholdMax and i >= iterIgnore: |
| portDownLinkNodeIter[node][i] = ptDownLinkToOfp |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port down link-to-ofp: "+ |
| str(ptDownLinkToOfp) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port down link-to-ofp ignored"+ |
| " due to excess in threshold or premature iteration") |
| |
| time.sleep(3) |
| |
| main.step('Starting wireshark capture for port status up') |
| main.ONOS1.tsharkGrep(tsharkPortStatus, tsharkPortUp) |
| |
| time.sleep(5) |
| main.step('Enable port and obtain timestamp') |
| main.Mininet1.handle.sendline('sh ifconfig ' + interfaceConfig + ' up') |
| main.Mininet1.handle.expect('mininet>') |
| |
| time.sleep(5) |
| main.ONOS1.tsharkStop() |
| |
| time.sleep(3) |
| os.system('scp ' + ONOSUser + '@' + |
| ONOS1Ip + ':' + tsharkPortUp + ' /tmp/') |
| |
| fPortUp = open(tsharkPortUp, 'r') |
| fLine = fPortUp.readline() |
| objUp = fLine.split(' ') |
| if len(fLine) > 0: |
| timestampBeginPtUp = int(float(objUp[1]) * 1000) |
| if timestampBeginPtUp < 1400000000000: |
| timestampBeginPtUp = int(float(objUp[2]) * 1000) |
| main.log.info('Port up begin timestamp: ' + str(timestampBeginPtUp)) |
| else: |
| main.log.info('Tshark output file returned unexpected' + ' results.') |
| timestampBeginPtUp = 0 |
| fPortUp.close() |
| |
| for node in range(0, clusterCount): |
| nodeNum = node+1 |
| metricsUp = CLIs[node].topologyEventsMetrics |
| jsonStrUp = metricsUp() |
| jsonObj = json.loads(jsonStrUp) |
| |
| if jsonObj: |
| graphTimestamp = jsonObj[graphTimestampKey]['value'] |
| deviceTimestamp = jsonObj[deviceTimestampKey]['value'] |
| linkTimestamp = jsonObj[linkTimestampKey]['value'] |
| else: |
| main.log.error( "Unexpected json object" ) |
| graphTimestamp = 0 |
| deviceTimestamp = 0 |
| linkTimestamp = 0 |
| |
| ptUpGraphToOfp = int(graphTimestamp) - int(timestampBeginPtUp) |
| ptUpDeviceToOfp = int(deviceTimestamp) - int(timestampBeginPtUp) |
| ptUpLinkToOfp = int(linkTimestamp) - int(timestampBeginPtUp) |
| |
| if ptUpGraphToOfp > upThresholdMin and\ |
| ptUpGraphToOfp < upThresholdMax and i > iterIgnore: |
| portUpGraphNodeIter[node][i] = ptUpGraphToOfp |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port up graph-to-ofp: "+ |
| str(ptUpGraphToOfp) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port up graph-to-ofp ignored"+ |
| " due to excess in threshold or premature iteration") |
| |
| if ptUpDeviceToOfp > upThresholdMin and\ |
| ptUpDeviceToOfp < upThresholdMax and i > iterIgnore: |
| portUpDevNodeIter[node][i] = ptUpDeviceToOfp |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port up device-to-ofp: "+ |
| str(ptUpDeviceToOfp) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port up device-to-ofp ignored"+ |
| " due to excess in threshold or premature iteration") |
| |
| if ptUpLinkToOfp > upThresholdMin and\ |
| ptUpLinkToOfp < upThresholdMax and i > iterIgnore: |
| portUpLinkNodeIter[node][i] = ptUpLinkToOfp |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port up link-to-ofp: "+ |
| str(ptUpLinkToOfp) + " ms") |
| else: |
| main.log.info("ONOS "+str(nodeNum)+ |
| " port up link-to-ofp ignored"+ |
| " due to excess in threshold or premature iteration") |
| |
| dbCmdList = [] |
| for node in range(0, clusterCount): |
| portUpDevList = [] |
| portUpGraphList = [] |
| portUpLinkList = [] |
| portDownDevList = [] |
| portDownGraphList = [] |
| portDownLinkList = [] |
| |
| portUpDevAvg = 0 |
| portUpGraphAvg = 0 |
| portUpLinkAvg = 0 |
| portDownDevAvg = 0 |
| portDownGraphAvg = 0 |
| portDownLinkAvg = 0 |
| |
| for item in portUpDevNodeIter[node]: |
| if item > 0.0: |
| portUpDevList.append(item) |
| |
| for item in portUpGraphNodeIter[node]: |
| if item > 0.0: |
| portUpGraphList.append(item) |
| |
| for item in portUpLinkNodeIter[node]: |
| if item > 0.0: |
| portUpLinkList.append(item) |
| |
| for item in portDownDevNodeIter[node]: |
| if item > 0.0: |
| portDownDevList.append(item) |
| |
| for item in portDownGraphNodeIter[node]: |
| if item > 0.0: |
| portDownGraphList.append(item) |
| |
| for item in portDownLinkNodeIter[node]: |
| if item > 0.0: |
| portDownLinkList.append(item) |
| |
| portUpDevAvg = round(numpy.mean(portUpDevList), 2) |
| portUpGraphAvg = round(numpy.mean(portUpGraphList), 2) |
| portUpLinkAvg = round(numpy.mean(portUpLinkList), 2) |
| |
| portDownDevAvg = round(numpy.mean(portDownDevList), 2) |
| portDownGraphAvg = round(numpy.mean(portDownGraphList), 2) |
| portDownLinkAvg = round(numpy.mean(portDownLinkList), 2) |
| |
| portUpStdDev = round(numpy.std(portUpGraphList), 2) |
| portDownStdDev = round(numpy.std(portDownGraphList), 2) |
| |
| main.log.report(' - Node ' + str(node + 1) + ' Summary - ') |
| main.log.report(' Port up ofp-to-device ' + |
| str(portUpDevAvg) + ' ms') |
| main.log.report(' Port up ofp-to-graph ' + |
| str(portUpGraphAvg) + ' ms') |
| main.log.report(' Port up ofp-to-link ' + |
| str(portUpLinkAvg) + ' ms') |
| |
| main.log.report(' Port down ofp-to-device ' + |
| str(round(portDownDevAvg, 2)) + ' ms') |
| main.log.report(' Port down ofp-to-graph ' + |
| str(portDownGraphAvg) + ' ms') |
| main.log.report(' Port down ofp-to-link ' + |
| str(portDownLinkAvg) + ' ms') |
| |
| dbCmdList.append("INSERT INTO port_latency_tests VALUES('" + |
| timeToPost + "','port_latency_results'," + jenkinsBuildNumber + |
| ',' + str(clusterCount) + ",'baremetal" + str(node + 1) + |
| "'," + str(portUpGraphAvg) + ',' + str(portUpStdDev) + |
| '' + str(portDownGraphAvg) + ',' + str(portDownStdDev) + ');') |
| |
| fResult = open(resultPath, 'a') |
| for line in dbCmdList: |
| if line: |
| fResult.write(line + '\n') |
| |
| fResult.close() |
| |
| # Delete switches from controller to prepare for next |
| # set of tests |
| main.Mininet1.deleteSwController('s1') |
| main.Mininet1.deleteSwController('s2') |
| utilities.assert_equals(expect=main.TRUE, |
| actual=assertion, |
| onpass='Port discovery latency calculation successful', |
| onfail='Port discovery test failed') |
| |
| def CASE4(self, main): |
| """ |
| Increase number of nodes and initiate CLI |
| |
| With the most recent implementation, we need a method to |
| ensure all ONOS nodes are killed, as well as redefine |
| the cell files to ensure all nodes that will be used |
| is in the cell file. Otherwise, exceptions will |
| prohibit test from running successfully. |
| |
| 3/12/15 |
| |
| """ |
| global clusterCount |
| import time |
| import os |
| |
| clusterCount += 2 |
| |
| benchIp = main.params[ 'BENCH' ][ 'ip' ] |
| features = main.params[ 'ENV' ][ 'cellFeatures' ] |
| cellName = main.params[ 'ENV' ][ 'cellName' ] |
| mininetIp = main.params[ 'MN' ][ 'ip1' ] |
| |
| main.log.report('Increasing cluster size to ' + str(clusterCount)) |
| |
| main.log.step( "Killing all ONOS processes before scale-out" ) |
| |
| for i in range( 1, 8 ): |
| main.ONOSbench.onosDie( |
| main.params[ 'CTRL' ][ 'ip'+str(i) ] ) |
| main.ONOSbench.onosUninstall( |
| main.params[ 'CTRL' ][ 'ip'+str(i) ] ) |
| |
| main.step( "Creating scale-out cell file" ) |
| cellIp = [] |
| for node in range( 1, clusterCount + 1 ): |
| cellIp.append( main.params[ 'CTRL' ][ 'ip'+str(node) ] ) |
| |
| main.log.info( "Cell Ip list: " + str(cellIp) ) |
| main.ONOSbench.createCellFile( benchIp, cellName, mininetIp, |
| str(features), *cellIp ) |
| |
| main.step( "Setting cell definition" ) |
| main.ONOSbench.setCell(cellName) |
| |
| main.step( "Packaging cell definition" ) |
| main.ONOSbench.onosPackage() |
| |
| for node in range( 1, clusterCount + 1 ): |
| main.ONOSbench.onosInstall( |
| node = main.params[ 'CTRL' ][ 'ip'+str(node) ]) |
| |
| time.sleep( 20 ) |
| |
| for node in range( 1, clusterCount + 1): |
| for i in range( 2 ): |
| isup = main.ONOSbench.isup( |
| main.params[ 'CTRL' ][ 'ip'+str(node) ] ) |
| if isup: |
| main.log.info( "ONOS "+str(node) + " is up\n") |
| break |
| if not isup: |
| main.log.error( "ONOS "+str(node) + " did not start" ) |
| |
| for node in range( 0, clusterCount ): |
| CLIs[node].startOnosCli( cellIp[node] ) |
| |
| main.step( 'Setting configurations for metrics' ) |
| configParam = 'maxEvents 1' |
| main.ONOSbench.onosCfgSet( nodeIpList[0], configName, configParam ) |
| configParam = 'maxBatchMs 0' |
| main.ONOSbench.onosCfgSet( nodeIpList[0], configName, configParam ) |
| configParam = 'maxIdleMs 0' |
| main.ONOSbench.onosCfgSet( nodeIpList[0], configName, configParam ) |
| |
| main.step( 'Activating essential applications' ) |
| CLIs[0].activateApp( 'org.onosproject.metrics' ) |
| CLIs[0].activateApp( 'org.onosproject.openflow' ) |
| |