| """ |
| Wrapper functions for FuncIntent |
| This functions include Onosclidriver and Mininetclidriver driver functions |
| Author: kelvin@onlab.us |
| """ |
| import time |
| import copy |
| import json |
| |
| def __init__( self ): |
| self.default = '' |
| |
| def hostIntent( main, |
| name, |
| host1, |
| host2, |
| onosNode=0, |
| host1Id="", |
| host2Id="", |
| mac1="", |
| mac2="", |
| vlan1="-1", |
| vlan2="-1", |
| sw1="", |
| sw2="", |
| expectedLink=0 ): |
| """ |
| Description: |
| Verify add-host-intent |
| Steps: |
| - Discover hosts |
| - Add host intents |
| - Check intents |
| - Verify flows |
| - Ping hosts |
| - Reroute |
| - Link down |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Link up |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Remove intents |
| Required: |
| name - Type of host intent to add eg. IPV4 | VLAN | Dualstack |
| host1 - Name of first host |
| host2 - Name of second host |
| Optional: |
| onosNode - ONOS node to install the intents in main.CLIs[ ] |
| 0 by default so that it will always use the first |
| ONOS node |
| host1Id - ONOS id of the first host eg. 00:00:00:00:00:01/-1 |
| host2Id - ONOS id of the second host |
| mac1 - Mac address of first host |
| mac2 - Mac address of the second host |
| vlan1 - Vlan tag of first host, defaults to -1 |
| vlan2 - Vlan tag of second host, defaults to -1 |
| sw1 - First switch to bring down & up for rerouting purpose |
| sw2 - Second switch to bring down & up for rerouting purpose |
| expectedLink - Expected link when the switches are down, it should |
| be two links lower than the links before the two |
| switches are down |
| Return: |
| Returns main.TRUE if all verification passed, otherwise return |
| main.FALSE; returns main.FALSE if there is a key error |
| """ |
| |
| # Assert variables |
| assert main, "There is no main variable" |
| assert name, "variable name is empty" |
| assert host1 and host2, "You must specify hosts" |
| |
| global itemName |
| itemName = name |
| h1Id = host1Id |
| h2Id = host2Id |
| h1Mac = mac1 |
| h2Mac = mac2 |
| vlan1 = vlan1 |
| vlan2 = vlan2 |
| hostNames = [ host1 , host2 ] |
| intentsId = [] |
| stepResult = main.TRUE |
| pingResult = main.TRUE |
| intentResult = main.TRUE |
| removeIntentResult = main.TRUE |
| flowResult = main.TRUE |
| topoResult = main.TRUE |
| linkDownResult = main.TRUE |
| linkUpResult = main.TRUE |
| onosNode = int( onosNode ) |
| |
| try: |
| if main.hostsData: |
| if not h1Mac: |
| h1Mac = main.hostsData[ host1 ][ 'mac' ] |
| if not h2Mac: |
| h2Mac = main.hostsData[ host2 ][ 'mac' ] |
| if main.hostsData[ host1 ].get( 'vlan' ): |
| vlan1 = main.hostsData[ host1 ][ 'vlan' ] |
| if main.hostsData[ host1 ].get( 'vlan' ): |
| vlan2 = main.hostsData[ host2 ][ 'vlan' ] |
| if not h1Id: |
| h1Id = main.hostsData[ host1 ][ 'id' ] |
| if not h2Id: |
| h2Id = main.hostsData[ host2 ][ 'id' ] |
| |
| assert h1Id and h2Id, "You must specify host IDs" |
| if not ( h1Id and h2Id ): |
| main.log.info( "There are no host IDs" ) |
| return main.FALSE |
| |
| except KeyError: |
| main.log.error( itemName + ": Key error Exception" ) |
| return main.FALSE |
| |
| # Discover hosts using arping incase pingall discovery failed |
| main.log.info( itemName + ": Discover host using arping" ) |
| main.Mininet1.arping( srcHost=host1, dstHost=host2 ) |
| main.Mininet1.arping( srcHost=host2, dstHost=host1 ) |
| host1 = main.CLIs[ 0 ].getHost( mac=h1Mac ) |
| host2 = main.CLIs[ 0 ].getHost( mac=h2Mac ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| |
| # Adding host intents |
| main.log.info( itemName + ": Adding host intents" ) |
| intent1 = main.CLIs[ onosNode ].addHostIntent( hostIdOne=h1Id, |
| hostIdTwo=h2Id ) |
| intentsId.append( intent1 ) |
| |
| # Check intents state |
| time.sleep( main.checkIntentSleep ) |
| intentResult = checkIntentState( main, intentsId ) |
| checkFlowsCount( main ) |
| |
| # Check intents state again if first check fails... |
| if not intentResult: |
| intentResult = checkIntentState( main, intentsId ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Ping hosts |
| firstPingResult = pingallHosts( main, hostNames ) |
| if not firstPingResult: |
| main.log.debug( "First ping failed, there must be" + |
| " something wrong with ONOS performance" ) |
| |
| # Ping hosts again... |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Initial Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Initial Pingall Failed\n' |
| |
| # Test rerouting if these variables exist |
| if sw1 and sw2 and expectedLink: |
| # Link down |
| linkDownResult = link( main, sw1, sw2, "down" ) |
| |
| if linkDownResult: |
| main.assertReturnString += 'Link Down Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Failed\n' |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, expectedLink ) |
| if topoResult: |
| main.assertReturnString += 'Link Down Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| |
| if pingTemp: |
| main.assertReturnString += 'Link Down Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Pingall Failed\n' |
| |
| # Check intent states |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Down Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Intent State Failed\n' |
| |
| # Checks ONOS state in link down |
| if linkDownResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link down" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link down" ) |
| |
| # Link up |
| linkUpResult = link( main, sw1, sw2, "up" ) |
| time.sleep( main.rerouteSleep ) |
| |
| if linkUpResult: |
| main.assertReturnString += 'Link Up Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Failed\n' |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, main.numLinks ) |
| |
| if topoResult: |
| main.assertReturnString += 'Link Up Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| |
| if pingTemp: |
| main.assertReturnString += 'Link Up Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Pingall Failed\n' |
| |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Up Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Intent State Failed\n' |
| |
| # Checks ONOS state in link up |
| if linkUpResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link back up" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link back up" ) |
| |
| # Remove all intents |
| removeIntentResult = removeAllIntents( main, intentsId ) |
| |
| if removeIntentResult: |
| main.assertReturnString += 'Remove Intents Passed' |
| else: |
| main.assertReturnString += 'Remove Intents Failed' |
| |
| stepResult = pingResult and linkDownResult and linkUpResult \ |
| and intentResult and removeIntentResult |
| |
| return stepResult |
| |
| def pointIntent( main, |
| name, |
| host1, |
| host2, |
| onosNode=0, |
| deviceId1="", |
| deviceId2="", |
| port1="", |
| port2="", |
| ethType="", |
| mac1="", |
| mac2="", |
| bandwidth="", |
| lambdaAlloc=False, |
| ipProto="", |
| ip1="", |
| ip2="", |
| tcp1="", |
| tcp2="", |
| sw1="", |
| sw2="", |
| expectedLink=0 ): |
| |
| """ |
| Description: |
| Verify add-point-intent |
| Steps: |
| - Get device ids | ports |
| - Add point intents |
| - Check intents |
| - Verify flows |
| - Ping hosts |
| - Reroute |
| - Link down |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Link up |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Remove intents |
| Required: |
| name - Type of point intent to add eg. IPV4 | VLAN | Dualstack |
| host1 - Name of first host |
| host2 - Name of second host |
| Optional: |
| onosNode - ONOS node to install the intents in main.CLIs[ ] |
| 0 by default so that it will always use the first |
| ONOS node |
| deviceId1 - ONOS device id of the first switch, the same as the |
| location of the first host eg. of:0000000000000001/1, |
| located at device 1 port 1 |
| deviceId2 - ONOS device id of the second switch |
| port1 - The port number where the first host is attached |
| port2 - The port number where the second host is attached |
| ethType - Ethernet type eg. IPV4, IPV6 |
| mac1 - Mac address of first host |
| mac2 - Mac address of the second host |
| bandwidth - Bandwidth capacity |
| lambdaAlloc - Allocate lambda, defaults to False |
| ipProto - IP protocol |
| ip1 - IP address of first host |
| ip2 - IP address of second host |
| tcp1 - TCP port of first host |
| tcp2 - TCP port of second host |
| sw1 - First switch to bring down & up for rerouting purpose |
| sw2 - Second switch to bring down & up for rerouting purpose |
| expectedLink - Expected link when the switches are down, it should |
| be two links lower than the links before the two |
| switches are down |
| """ |
| |
| assert main, "There is no main variable" |
| assert name, "variable name is empty" |
| assert host1 and host2, "You must specify hosts" |
| |
| global itemName |
| itemName = name |
| host1 = host1 |
| host2 = host2 |
| hostNames = [ host1, host2 ] |
| intentsId = [] |
| |
| pingResult = main.TRUE |
| intentResult = main.TRUE |
| removeIntentResult = main.TRUE |
| flowResult = main.TRUE |
| topoResult = main.TRUE |
| linkDownResult = main.TRUE |
| linkUpResult = main.TRUE |
| onosNode = int( onosNode ) |
| |
| # Adding bidirectional point intents |
| main.log.info( itemName + ": Adding point intents" ) |
| intent1 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId1, |
| egressDevice=deviceId2, |
| portIngress=port1, |
| portEgress=port2, |
| ethType=ethType, |
| ethSrc=mac1, |
| ethDst=mac2, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc=ip1, |
| ipDst=ip2, |
| tcpSrc=tcp1, |
| tcpDst=tcp2 ) |
| |
| intentsId.append( intent1 ) |
| intent2 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId2, |
| egressDevice=deviceId1, |
| portIngress=port2, |
| portEgress=port1, |
| ethType=ethType, |
| ethSrc=mac2, |
| ethDst=mac1, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc=ip2, |
| ipDst=ip1, |
| tcpSrc=tcp2, |
| tcpDst=tcp1 ) |
| intentsId.append( intent2 ) |
| |
| # Check intents state |
| time.sleep( main.checkIntentSleep ) |
| intentResult = checkIntentState( main, intentsId ) |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| |
| # Check intents state again if first check fails... |
| if not intentResult: |
| intentResult = checkIntentState( main, intentsId ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Initial Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Initial Pingall Failed\n' |
| |
| # Test rerouting if these variables exist |
| if sw1 and sw2 and expectedLink: |
| # link down |
| linkDownResult = link( main, sw1, sw2, "down" ) |
| |
| if linkDownResult: |
| main.assertReturnString += 'Link Down Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Failed\n' |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, expectedLink ) |
| if topoResult: |
| main.assertReturnString += 'Link Down Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Link Down Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Pingall Failed\n' |
| |
| # Check intent state |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Down Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Intent State Failed\n' |
| |
| # Checks ONOS state in link down |
| if linkDownResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link down" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link down" ) |
| |
| # link up |
| linkUpResult = link( main, sw1, sw2, "up" ) |
| if linkUpResult: |
| main.assertReturnString += 'Link Up Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Failed\n' |
| |
| time.sleep( main.rerouteSleep ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, main.numLinks ) |
| if topoResult: |
| main.assertReturnString += 'Link Up Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| |
| if pingTemp: |
| main.assertReturnString += 'Link Up Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Pingall Failed\n' |
| |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Up Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Intent State Failed\n' |
| |
| # Checks ONOS state in link up |
| if linkUpResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link back up" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link back up" ) |
| |
| # Remove all intents |
| removeIntentResult = removeAllIntents( main, intentsId ) |
| if removeIntentResult: |
| main.assertReturnString += 'Remove Intents Passed' |
| else: |
| main.assertReturnString += 'Remove Intents Failed' |
| |
| stepResult = pingResult and linkDownResult and linkUpResult \ |
| and intentResult and removeIntentResult |
| |
| return stepResult |
| |
| def pointIntentTcp( main, |
| name, |
| host1, |
| host2, |
| onosNode=0, |
| deviceId1="", |
| deviceId2="", |
| port1="", |
| port2="", |
| ethType="", |
| mac1="", |
| mac2="", |
| bandwidth="", |
| lambdaAlloc=False, |
| ipProto="", |
| ip1="", |
| ip2="", |
| tcp1="", |
| tcp2="", |
| sw1="", |
| sw2="", |
| expectedLink=0 ): |
| |
| """ |
| Description: |
| Verify add-point-intent only for TCP |
| Steps: |
| - Get device ids | ports |
| - Add point intents |
| - Check intents |
| - Verify flows |
| - Ping hosts |
| - Reroute |
| - Link down |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Link up |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Remove intents |
| Required: |
| name - Type of point intent to add eg. IPV4 | VLAN | Dualstack |
| host1 - Name of first host |
| host2 - Name of second host |
| Optional: |
| onosNode - ONOS node to install the intents in main.CLIs[ ] |
| 0 by default so that it will always use the first |
| ONOS node |
| deviceId1 - ONOS device id of the first switch, the same as the |
| location of the first host eg. of:0000000000000001/1, |
| located at device 1 port 1 |
| deviceId2 - ONOS device id of the second switch |
| port1 - The port number where the first host is attached |
| port2 - The port number where the second host is attached |
| ethType - Ethernet type eg. IPV4, IPV6 |
| mac1 - Mac address of first host |
| mac2 - Mac address of the second host |
| bandwidth - Bandwidth capacity |
| lambdaAlloc - Allocate lambda, defaults to False |
| ipProto - IP protocol |
| ip1 - IP address of first host |
| ip2 - IP address of second host |
| tcp1 - TCP port of first host |
| tcp2 - TCP port of second host |
| sw1 - First switch to bring down & up for rerouting purpose |
| sw2 - Second switch to bring down & up for rerouting purpose |
| expectedLink - Expected link when the switches are down, it should |
| be two links lower than the links before the two |
| switches are down |
| """ |
| |
| assert main, "There is no main variable" |
| assert name, "variable name is empty" |
| assert host1 and host2, "You must specify hosts" |
| |
| global itemName |
| itemName = name |
| host1 = host1 |
| host2 = host2 |
| hostNames = [ host1, host2 ] |
| intentsId = [] |
| |
| iperfResult = main.TRUE |
| intentResult = main.TRUE |
| removeIntentResult = main.TRUE |
| flowResult = main.TRUE |
| topoResult = main.TRUE |
| linkDownResult = main.TRUE |
| linkUpResult = main.TRUE |
| onosNode = int( onosNode ) |
| |
| # Adding bidirectional point intents |
| main.log.info( itemName + ": Adding point intents" ) |
| intent1 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId1, |
| egressDevice=deviceId2, |
| portIngress=port1, |
| portEgress=port2, |
| ethType=ethType, |
| ethSrc=mac1, |
| ethDst=mac2, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc=ip1, |
| ipDst=ip2, |
| tcpSrc=tcp1, |
| tcpDst="" ) |
| |
| intent2 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId2, |
| egressDevice=deviceId1, |
| portIngress=port2, |
| portEgress=port1, |
| ethType=ethType, |
| ethSrc=mac2, |
| ethDst=mac1, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc=ip2, |
| ipDst=ip1, |
| tcpSrc=tcp2, |
| tcpDst="" ) |
| |
| intent3 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId1, |
| egressDevice=deviceId2, |
| portIngress=port1, |
| portEgress=port2, |
| ethType=ethType, |
| ethSrc=mac1, |
| ethDst=mac2, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc=ip1, |
| ipDst=ip2, |
| tcpSrc="", |
| tcpDst=tcp2 ) |
| |
| intent4 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId2, |
| egressDevice=deviceId1, |
| portIngress=port2, |
| portEgress=port1, |
| ethType=ethType, |
| ethSrc=mac2, |
| ethDst=mac1, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc=ip2, |
| ipDst=ip1, |
| tcpSrc="", |
| tcpDst=tcp1 ) |
| intentsId.append( intent1 ) |
| intentsId.append( intent2 ) |
| intentsId.append( intent3 ) |
| intentsId.append( intent4 ) |
| |
| # Check intents state |
| time.sleep( main.checkIntentSleep ) |
| intentResult = checkIntentState( main, intentsId ) |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| |
| # Check intents state again if first check fails... |
| if not intentResult: |
| intentResult = checkIntentState( main, intentsId ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Run iperf to both host |
| iperfTemp = main.Mininet1.iperftcp( host1,host2,10 ) |
| iperfResult = iperfResult and iperfTemp |
| if iperfTemp: |
| main.assertReturnString += 'Initial Iperf Passed\n' |
| else: |
| main.assertReturnString += 'Initial Iperf Failed\n' |
| |
| # Test rerouting if these variables exist |
| if sw1 and sw2 and expectedLink: |
| # link down |
| linkDownResult = link( main, sw1, sw2, "down" ) |
| |
| if linkDownResult: |
| main.assertReturnString += 'Link Down Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Failed\n' |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, expectedLink ) |
| if topoResult: |
| main.assertReturnString += 'Link Down Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Topology State Failed\n' |
| |
| # Run iperf to both host |
| iperfTemp = main.Mininet1.iperftcp( host1,host2,10 ) |
| iperfResult = iperfResult and iperfTemp |
| if iperfTemp: |
| main.assertReturnString += 'Link Down Iperf Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Iperf Failed\n' |
| |
| # Check intent state |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Down Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Intent State Failed\n' |
| |
| # Checks ONOS state in link down |
| if linkDownResult and topoResult and iperfResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link down" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link down" ) |
| |
| # link up |
| linkUpResult = link( main, sw1, sw2, "up" ) |
| if linkUpTemp: |
| main.assertReturnString += 'Link Up Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Failed\n' |
| |
| time.sleep( main.rerouteSleep ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, main.numLinks ) |
| |
| if topoResult: |
| main.assertReturnString += 'Link Up Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Topology State Failed\n' |
| |
| # Run iperf to both host |
| iperfTemp = main.Mininet1.iperftcp( host1,host2,10 ) |
| iperfResult = iperfResult and iperfTemp |
| if iperfTemp: |
| main.assertReturnString += 'Link Up Iperf Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Iperf Failed\n' |
| |
| # Check intent state |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Down Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Intent State Failed\n' |
| |
| # Checks ONOS state in link up |
| if linkUpResult and topoResult and iperfResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link back up" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link back up" ) |
| |
| # Remove all intents |
| removeIntentResult = removeAllIntents( main, intentsId ) |
| if removeIntentResult: |
| main.assertReturnString += 'Remove Intents Passed' |
| else: |
| main.assertReturnString += 'Remove Intents Failed' |
| |
| stepResult = iperfResult and linkDownResult and linkUpResult \ |
| and intentResult and removeIntentResult |
| |
| return stepResult |
| |
| def singleToMultiIntent( main, |
| name, |
| hostNames, |
| onosNode=0, |
| devices="", |
| ports=None, |
| ethType="", |
| macs=None, |
| bandwidth="", |
| lambdaAlloc=False, |
| ipProto="", |
| ipAddresses="", |
| tcp="", |
| sw1="", |
| sw2="", |
| expectedLink=0 ): |
| """ |
| Verify Single to Multi Point intents |
| NOTE:If main.hostsData is not defined, variables data should be passed |
| in the same order index wise. All devices in the list should have the same |
| format, either all the devices have its port or it doesn't. |
| eg. hostName = [ 'h1', 'h2' ,.. ] |
| devices = [ 'of:0000000000000001', 'of:0000000000000002', ...] |
| ports = [ '1', '1', ..] |
| ... |
| Description: |
| Verify add-single-to-multi-intent iterates through the list of given |
| host | devices and add intents |
| Steps: |
| - Get device ids | ports |
| - Add single to multi point intents |
| - Check intents |
| - Verify flows |
| - Ping hosts |
| - Reroute |
| - Link down |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Link up |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Remove intents |
| Required: |
| name - Type of point intent to add eg. IPV4 | VLAN | Dualstack |
| hostNames - List of host names |
| Optional: |
| onosNode - ONOS node to install the intents in main.CLIs[ ] |
| 0 by default so that it will always use the first |
| ONOS node |
| devices - List of device ids in the same order as the hosts |
| in hostNames |
| ports - List of port numbers in the same order as the device in |
| devices |
| ethType - Ethernet type eg. IPV4, IPV6 |
| macs - List of hosts mac address in the same order as the hosts in |
| hostNames |
| bandwidth - Bandwidth capacity |
| lambdaAlloc - Allocate lambda, defaults to False |
| ipProto - IP protocol |
| ipAddresses - IP addresses of host in the same order as the hosts in |
| hostNames |
| tcp - TCP ports in the same order as the hosts in hostNames |
| sw1 - First switch to bring down & up for rerouting purpose |
| sw2 - Second switch to bring down & up for rerouting purpose |
| expectedLink - Expected link when the switches are down, it should |
| be two links lower than the links before the two |
| switches are down |
| """ |
| |
| assert main, "There is no main variable" |
| assert hostNames, "You must specify hosts" |
| assert devices or main.hostsData, "You must specify devices" |
| |
| global itemName |
| itemName = name |
| tempHostsData = {} |
| intentsId = [] |
| onosNode = int( onosNode ) |
| |
| macsDict = {} |
| ipDict = {} |
| if hostNames and devices: |
| if len( hostNames ) != len( devices ): |
| main.log.debug( "hosts and devices does not have the same length" ) |
| #print "len hostNames = ", len( hostNames ) |
| #print "len devices = ", len( devices ) |
| return main.FALSE |
| if ports: |
| if len( ports ) != len( devices ): |
| main.log.error( "Ports and devices does " + |
| "not have the same length" ) |
| #print "len devices = ", len( devices ) |
| #print "len ports = ", len( ports ) |
| return main.FALSE |
| else: |
| main.log.info( "Device Ports are not specified" ) |
| if macs: |
| for i in range( len( devices ) ): |
| macsDict[ devices[ i ] ] = macs[ i ] |
| |
| elif hostNames and not devices and main.hostsData: |
| devices = [] |
| main.log.info( "singleToMultiIntent function is using main.hostsData" ) |
| for host in hostNames: |
| devices.append( main.hostsData.get( host ).get( 'location' ) ) |
| macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \ |
| main.hostsData.get( host ).get( 'mac' ) |
| ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \ |
| main.hostsData.get( host ).get( 'ipAddresses' ) |
| #print main.hostsData |
| |
| #print 'host names = ', hostNames |
| #print 'devices = ', devices |
| #print "macsDict = ", macsDict |
| |
| pingResult = main.TRUE |
| intentResult = main.TRUE |
| removeIntentResult = main.TRUE |
| flowResult = main.TRUE |
| topoResult = main.TRUE |
| linkDownResult = main.TRUE |
| linkUpResult = main.TRUE |
| |
| devicesCopy = copy.copy( devices ) |
| if ports: |
| portsCopy = copy.copy( ports ) |
| main.log.info( itemName + ": Adding single point to multi point intents" ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| |
| # Adding bidirectional point intents |
| for i in range( len( devices ) ): |
| ingressDevice = devicesCopy[ i ] |
| egressDeviceList = copy.copy( devicesCopy ) |
| egressDeviceList.remove( ingressDevice ) |
| if ports: |
| portIngress = portsCopy[ i ] |
| portEgressList = copy.copy( portsCopy ) |
| del portEgressList[ i ] |
| else: |
| portIngress = "" |
| portEgressList = None |
| if not macsDict: |
| srcMac = "" |
| else: |
| srcMac = macsDict[ ingressDevice ] |
| if srcMac == None: |
| main.log.debug( "There is no MAC in device - " + ingressDevice ) |
| srcMac = "" |
| |
| intentsId.append( |
| main.CLIs[ onosNode ].addSinglepointToMultipointIntent( |
| ingressDevice=ingressDevice, |
| egressDeviceList=egressDeviceList, |
| portIngress=portIngress, |
| portEgressList=portEgressList, |
| ethType=ethType, |
| ethSrc=srcMac, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc="", |
| ipDst="", |
| tcpSrc="", |
| tcpDst="" ) ) |
| |
| # Wait some time for the flow to go through when using multi instance |
| pingTemp = pingallHosts( main, hostNames ) |
| |
| # Check intents state |
| time.sleep( main.checkIntentSleep ) |
| intentResult = checkIntentState( main, intentsId ) |
| |
| # Check intents state again if first check fails... |
| if not intentResult: |
| intentResult = checkIntentState( main, intentsId ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Initial Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Initial Pingall Failed\n' |
| |
| # Test rerouting if these variables exist |
| if sw1 and sw2 and expectedLink: |
| # link down |
| linkDownResult = link( main, sw1, sw2, "down" ) |
| |
| if linkDownResult: |
| main.assertReturnString += 'Link Down Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Failed\n' |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, expectedLink ) |
| if topoResult: |
| main.assertReturnString += 'Link Down Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Link Down Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Pingall Failed\n' |
| |
| # Check intent state |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Down Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Intent State Failed\n' |
| |
| # Checks ONOS state in link down |
| if linkDownResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link down" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link down" ) |
| |
| # link up |
| linkUpResult = link( main, sw1, sw2, "up" ) |
| if linkUpResult: |
| main.assertReturnString += 'Link Up Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Failed\n' |
| |
| time.sleep( main.rerouteSleep ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, main.numLinks ) |
| if topoResult: |
| main.assertReturnString += 'Link Up Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Link Up Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Pingall Failed\n' |
| |
| # Check Intents |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Up Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Intent State Failed\n' |
| |
| # Checks ONOS state in link up |
| if linkUpResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link back up" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link back up" ) |
| |
| # Remove all intents |
| removeIntentResult = removeAllIntents( main, intentsId ) |
| if removeIntentResult: |
| main.assertReturnString += 'Remove Intents Passed' |
| else: |
| main.assertReturnString += 'Remove Intents Failed' |
| |
| stepResult = pingResult and linkDownResult and linkUpResult \ |
| and intentResult and removeIntentResult |
| |
| return stepResult |
| |
| def multiToSingleIntent( main, |
| name, |
| hostNames, |
| onosNode=0, |
| devices="", |
| ports=None, |
| ethType="", |
| macs=None, |
| bandwidth="", |
| lambdaAlloc=False, |
| ipProto="", |
| ipAddresses="", |
| tcp="", |
| sw1="", |
| sw2="", |
| expectedLink=0 ): |
| """ |
| Verify Single to Multi Point intents |
| NOTE:If main.hostsData is not defined, variables data should be passed in the |
| same order index wise. All devices in the list should have the same |
| format, either all the devices have its port or it doesn't. |
| eg. hostName = [ 'h1', 'h2' ,.. ] |
| devices = [ 'of:0000000000000001', 'of:0000000000000002', ...] |
| ports = [ '1', '1', ..] |
| ... |
| Description: |
| Verify add-multi-to-single-intent |
| Steps: |
| - Get device ids | ports |
| - Add multi to single point intents |
| - Check intents |
| - Verify flows |
| - Ping hosts |
| - Reroute |
| - Link down |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Link up |
| - Verify flows |
| - Check topology |
| - Ping hosts |
| - Remove intents |
| Required: |
| name - Type of point intent to add eg. IPV4 | VLAN | Dualstack |
| hostNames - List of host names |
| Optional: |
| onosNode - ONOS node to install the intents in main.CLIs[ ] |
| 0 by default so that it will always use the first |
| ONOS node |
| devices - List of device ids in the same order as the hosts |
| in hostNames |
| ports - List of port numbers in the same order as the device in |
| devices |
| ethType - Ethernet type eg. IPV4, IPV6 |
| macs - List of hosts mac address in the same order as the hosts in |
| hostNames |
| bandwidth - Bandwidth capacity |
| lambdaAlloc - Allocate lambda, defaults to False |
| ipProto - IP protocol |
| ipAddresses - IP addresses of host in the same order as the hosts in |
| hostNames |
| tcp - TCP ports in the same order as the hosts in hostNames |
| sw1 - First switch to bring down & up for rerouting purpose |
| sw2 - Second switch to bring down & up for rerouting purpose |
| expectedLink - Expected link when the switches are down, it should |
| be two links lower than the links before the two |
| switches are down |
| """ |
| |
| assert main, "There is no main variable" |
| assert hostNames, "You must specify hosts" |
| assert devices or main.hostsData, "You must specify devices" |
| |
| global itemName |
| itemName = name |
| tempHostsData = {} |
| intentsId = [] |
| onosNode = int( onosNode ) |
| |
| macsDict = {} |
| ipDict = {} |
| if hostNames and devices: |
| if len( hostNames ) != len( devices ): |
| main.log.debug( "hosts and devices does not have the same length" ) |
| #print "len hostNames = ", len( hostNames ) |
| #print "len devices = ", len( devices ) |
| return main.FALSE |
| if ports: |
| if len( ports ) != len( devices ): |
| main.log.error( "Ports and devices does " + |
| "not have the same length" ) |
| #print "len devices = ", len( devices ) |
| #print "len ports = ", len( ports ) |
| return main.FALSE |
| else: |
| main.log.info( "Device Ports are not specified" ) |
| if macs: |
| for i in range( len( devices ) ): |
| macsDict[ devices[ i ] ] = macs[ i ] |
| elif hostNames and not devices and main.hostsData: |
| devices = [] |
| main.log.info( "multiToSingleIntent function is using main.hostsData" ) |
| for host in hostNames: |
| devices.append( main.hostsData.get( host ).get( 'location' ) ) |
| macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \ |
| main.hostsData.get( host ).get( 'mac' ) |
| ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \ |
| main.hostsData.get( host ).get( 'ipAddresses' ) |
| #print main.hostsData |
| |
| #print 'host names = ', hostNames |
| #print 'devices = ', devices |
| #print "macsDict = ", macsDict |
| |
| pingResult = main.TRUE |
| intentResult = main.TRUE |
| removeIntentResult = main.TRUE |
| flowResult = main.TRUE |
| topoResult = main.TRUE |
| linkDownResult = main.TRUE |
| linkUpResult = main.TRUE |
| |
| devicesCopy = copy.copy( devices ) |
| if ports: |
| portsCopy = copy.copy( ports ) |
| main.log.info( itemName + ": Adding multi point to single point intents" ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| |
| # Adding bidirectional point intents |
| for i in range( len( devices ) ): |
| egressDevice = devicesCopy[ i ] |
| ingressDeviceList = copy.copy( devicesCopy ) |
| ingressDeviceList.remove( egressDevice ) |
| if ports: |
| portEgress = portsCopy[ i ] |
| portIngressList = copy.copy( portsCopy ) |
| del portIngressList[ i ] |
| else: |
| portEgress = "" |
| portIngressList = None |
| if not macsDict: |
| dstMac = "" |
| else: |
| dstMac = macsDict[ egressDevice ] |
| if dstMac == None: |
| main.log.debug( "There is no MAC in device - " + egressDevice ) |
| dstMac = "" |
| |
| intentsId.append( |
| main.CLIs[ onosNode ].addMultipointToSinglepointIntent( |
| ingressDeviceList=ingressDeviceList, |
| egressDevice=egressDevice, |
| portIngressList=portIngressList, |
| portEgress=portEgress, |
| ethType=ethType, |
| ethDst=dstMac, |
| bandwidth=bandwidth, |
| lambdaAlloc=lambdaAlloc, |
| ipProto=ipProto, |
| ipSrc="", |
| ipDst="", |
| tcpSrc="", |
| tcpDst="" ) ) |
| |
| pingTemp = pingallHosts( main, hostNames ) |
| |
| # Check intents state |
| time.sleep( main.checkIntentSleep ) |
| intentResult = checkIntentState( main, intentsId ) |
| |
| # Check intents state again if first check fails... |
| if not intentResult: |
| intentResult = checkIntentState( main, intentsId ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| |
| # Ping hosts again... |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Initial Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Initial Pingall Failed\n' |
| |
| # Test rerouting if these variables exist |
| if sw1 and sw2 and expectedLink: |
| # link down |
| linkDownResult = link( main, sw1, sw2, "down" ) |
| |
| if linkDownResult: |
| main.assertReturnString += 'Link Down Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Failed\n' |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, expectedLink ) |
| if topoResult: |
| main.assertReturnString += 'Link Down Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Link Down Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Pingall Failed\n' |
| |
| # Check intent state |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Down Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Down Intent State Failed\n' |
| |
| # Checks ONOS state in link down |
| if linkDownResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link down" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link down" ) |
| |
| # link up |
| linkUpResult = link( main, sw1, sw2, "up" ) |
| if linkUpResult: |
| main.assertReturnString += 'Link Up Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Failed\n' |
| |
| time.sleep( main.rerouteSleep ) |
| |
| # Check flows count in each node |
| checkFlowsCount( main ) |
| # Verify flows |
| checkFlowsState( main ) |
| |
| # Check OnosTopology |
| topoResult = checkTopology( main, main.numLinks ) |
| if topoResult: |
| main.assertReturnString += 'Link Up Topology State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Topology State Failed\n' |
| |
| # Ping hosts |
| pingTemp = pingallHosts( main, hostNames ) |
| pingResult = pingResult and pingTemp |
| if pingTemp: |
| main.assertReturnString += 'Link Up Pingall Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Pingall Failed\n' |
| |
| # Check Intents |
| intentTemp = checkIntentState( main, intentsId ) |
| intentResult = intentResult and intentTemp |
| if intentTemp: |
| main.assertReturnString += 'Link Up Intent State Passed\n' |
| else: |
| main.assertReturnString += 'Link Up Intent State Failed\n' |
| |
| # Checks ONOS state in link up |
| if linkUpResult and topoResult and pingResult and intentResult: |
| main.log.info( itemName + ": Successfully brought link back up" ) |
| else: |
| main.log.error( itemName + ": Failed to bring link back up" ) |
| |
| # Remove all intents |
| removeIntentResult = removeAllIntents( main, intentsId ) |
| if removeIntentResult: |
| main.assertReturnString += 'Remove Intents Passed' |
| else: |
| main.assertReturnString += 'Remove Intents Failed' |
| |
| stepResult = pingResult and linkDownResult and linkUpResult \ |
| and intentResult and removeIntentResult |
| |
| return stepResult |
| |
| def pingallHosts( main, hostList ): |
| # Ping all host in the hosts list variable |
| main.log.info( "Pinging: " + str( hostList ) ) |
| return main.Mininet1.pingallHosts( hostList ) |
| |
| def getHostsData( main ): |
| """ |
| Use fwd app and pingall to discover all the hosts |
| """ |
| |
| activateResult = main.TRUE |
| appCheck = main.TRUE |
| getDataResult = main.TRUE |
| main.log.info( "Activating reactive forwarding app " ) |
| activateResult = main.CLIs[ 0 ].activateApp( "org.onosproject.fwd" ) |
| time.sleep( main.fwdSleep ) |
| |
| for i in range( main.numCtrls ): |
| appCheck = appCheck and main.CLIs[ i ].appToIDCheck() |
| if appCheck != main.TRUE: |
| main.log.warn( main.CLIs[ i ].apps() ) |
| main.log.warn( main.CLIs[ i ].appIDs() ) |
| |
| pingResult = main.Mininet1.pingall( timeout = 600 ) |
| hostsJson = json.loads( main.CLIs[ 0 ].hosts() ) |
| hosts = main.Mininet1.getHosts().keys() |
| # TODO: Make better use of new getHosts function |
| for host in hosts: |
| main.hostsData[ host ] = {} |
| main.hostsData[ host ][ 'mac' ] = \ |
| main.Mininet1.getMacAddress( host ).upper() |
| for hostj in hostsJson: |
| if main.hostsData[ host ][ 'mac' ] == hostj[ 'mac' ]: |
| main.hostsData[ host ][ 'id' ] = hostj[ 'id' ] |
| main.hostsData[ host ][ 'vlan' ] = hostj[ 'vlan' ] |
| main.hostsData[ host ][ 'location' ] = \ |
| hostj[ 'location' ][ 'elementId' ] + '/' + \ |
| hostj[ 'location' ][ 'port' ] |
| main.hostsData[ host ][ 'ipAddresses' ] = hostj[ 'ipAddresses' ] |
| |
| main.log.info( "Deactivating reactive forwarding app " ) |
| deactivateResult = main.CLIs[ 0 ].deactivateApp( "org.onosproject.fwd" ) |
| if activateResult and deactivateResult and main.hostsData: |
| main.log.info( "Successfully used fwd app to discover hosts " ) |
| getDataResult = main.TRUE |
| else: |
| main.log.info( "Failed to use fwd app to discover hosts " ) |
| getDataResult = main.FALSE |
| |
| print main.hostsData |
| |
| return getDataResult |
| |
| def checkTopology( main, expectedLink ): |
| statusResult = main.TRUE |
| # Check onos topology |
| main.log.info( itemName + ": Checking ONOS topology " ) |
| |
| for i in range( main.numCtrls ): |
| topologyResult = main.CLIs[ i ].topology() |
| statusResult = main.ONOSbench.checkStatus( topologyResult, |
| main.numSwitch, |
| expectedLink )\ |
| and statusResult |
| if not statusResult: |
| main.log.error( itemName + ": Topology mismatch" ) |
| else: |
| main.log.info( itemName + ": Topology match" ) |
| return statusResult |
| |
| def checkIntentState( main, intentsId ): |
| """ |
| This function will check intent state to make sure all the intents |
| are in INSTALLED state |
| """ |
| |
| intentResult = main.TRUE |
| results = [] |
| |
| main.log.info( itemName + ": Checking intents state" ) |
| # First check of intents |
| for i in range( main.numCtrls ): |
| tempResult = main.CLIs[ i ].checkIntentState( intentsId=intentsId ) |
| results.append( tempResult ) |
| |
| expectedState = [ 'INSTALLED', 'INSTALLING' ] |
| |
| if all( result == main.TRUE for result in results ): |
| main.log.info( itemName + ": Intents are installed correctly" ) |
| else: |
| # Wait for at least 5 second before checking the intents again |
| time.sleep( 5 ) |
| results = [] |
| # Second check of intents since some of the intents may be in |
| # INSTALLING state, they should be in INSTALLED at this time |
| for i in range( main.numCtrls ): |
| tempResult = main.CLIs[ i ].checkIntentState( |
| intentsId=intentsId ) |
| results.append( tempResult ) |
| if all( result == main.TRUE for result in results ): |
| main.log.info( itemName + ": Intents are installed correctly" ) |
| else: |
| main.log.error( itemName + ": Intents are NOT installed correctly" ) |
| intentResult = main.FALSE |
| |
| return intentResult |
| |
| def checkFlowsState( main ): |
| |
| main.log.info( itemName + ": Check flows state" ) |
| checkFlowsResult = main.CLIs[ 0 ].checkFlowsState() |
| return checkFlowsResult |
| |
| def link( main, sw1, sw2, option): |
| |
| # link down |
| main.log.info( itemName + ": Bring link " + option + "between " + |
| sw1 + " and " + sw2 ) |
| linkResult = main.Mininet1.link( end1=sw1, end2=sw2, option=option ) |
| return linkResult |
| |
| def removeAllIntents( main, intentsId ): |
| """ |
| Remove all intents in the intentsId |
| """ |
| |
| onosSummary = [] |
| removeIntentResult = main.TRUE |
| # Remove intents |
| for intent in intentsId: |
| main.CLIs[ 0 ].removeIntent( intentId=intent, purge=True ) |
| |
| time.sleep( main.removeIntentSleep ) |
| |
| # If there is remianing intents then remove intents should fail |
| for i in range( main.numCtrls ): |
| onosSummary.append( json.loads( main.CLIs[ i ].summary() ) ) |
| |
| for summary in onosSummary: |
| if summary.get( 'intents' ) != 0: |
| main.log.warn( itemName + ": There are " + |
| str( summary.get( 'intents' ) ) + |
| " intents remaining in node " + |
| str( summary.get( 'node' ) ) + |
| ", failed to remove all the intents " ) |
| removeIntentResult = main.FALSE |
| |
| if removeIntentResult: |
| main.log.info( itemName + ": There are no more intents remaining, " + |
| "successfully removed all the intents." ) |
| |
| return removeIntentResult |
| |
| def checkFlowsCount( main ): |
| """ |
| Check flows count in each node |
| """ |
| |
| flowsCount = [] |
| main.log.info( itemName + ": Checking flows count in each ONOS node" ) |
| for i in range( main.numCtrls ): |
| summaryResult = main.CLIs[ i ].summary() |
| if not summaryResult: |
| main.log.error( itemName + ": There is something wrong with " + |
| "summary command" ) |
| return main.FALSE |
| else: |
| summaryJson = json.loads( summaryResult ) |
| flowsCount.append( summaryJson.get( 'flows' ) ) |
| |
| if flowsCount: |
| if all( flows==flowsCount[ 0 ] for flows in flowsCount ): |
| main.log.info( itemName + ": There are " + str( flowsCount[ 0 ] ) + |
| " flows in all ONOS node" ) |
| else: |
| for i in range( main.numCtrls ): |
| main.log.debug( itemName + ": ONOS node " + str( i ) + " has " + |
| str( flowsCount[ i ] ) + " flows" ) |
| else: |
| main.log.error( "Checking flows count failed, check summary command" ) |
| return main.FALSE |
| |
| return main.TRUE |
| |
| def checkLeaderChange( leaders1, leaders2 ): |
| """ |
| Checks for a change in intent partition leadership. |
| |
| Takes the output of leaders -c in json string format before and after |
| a potential change as input |
| |
| Returns main.TRUE if no mismatches are detected |
| Returns main.FALSE if there is a mismatch or on error loading the input |
| """ |
| try: |
| leaders1 = json.loads( leaders1 ) |
| leaders2 = json.loads( leaders2 ) |
| except ( AttributeError, TypeError): |
| main.log.exception( self.name + ": Object not as expected" ) |
| return main.FALSE |
| except Exception: |
| main.log.exception( self.name + ": Uncaught exception!" ) |
| main.cleanup() |
| main.exit() |
| main.log.info( "Checking Intent Paritions for Change in Leadership" ) |
| mismatch = False |
| for dict1 in leaders1: |
| if "intent" in dict1.get( "topic", [] ): |
| for dict2 in leaders2: |
| if dict1.get( "topic", 0 ) == dict2.get( "topic", 0 ) and \ |
| dict1.get( "leader", 0 ) != dict2.get( "leader", 0 ): |
| mismatch = True |
| main.log.error( "{0} changed leader from {1} to {2}".\ |
| format( dict1.get( "topic", "no-topic" ),\ |
| dict1.get( "leader", "no-leader" ),\ |
| dict2.get( "leader", "no-leader" ) ) ) |
| if mismatch: |
| return main.FALSE |
| else: |
| return main.TRUE |
| |
| def report( main ): |
| """ |
| Report errors/warnings/exceptions |
| """ |
| |
| main.ONOSbench.logReport( main.ONOSip[ 0 ], |
| [ "INFO", |
| "FOLLOWER", |
| "WARN", |
| "flow", |
| "ERROR", |
| "Except" ], |
| "s" ) |
| |
| main.log.info( "ERROR report: \n" ) |
| for i in range( main.numCtrls ): |
| main.ONOSbench.logReport( main.ONOSip[ i ], |
| [ "ERROR" ], |
| "d" ) |
| |
| main.log.info( "EXCEPTIONS report: \n" ) |
| for i in range( main.numCtrls ): |
| main.ONOSbench.logReport( main.ONOSip[ i ], |
| [ "Except" ], |
| "d" ) |
| |
| main.log.info( "WARNING report: \n" ) |
| for i in range( main.numCtrls ): |
| main.ONOSbench.logReport( main.ONOSip[ i ], |
| [ "WARN" ], |
| "d" ) |