blob: 14a90af842c22a21b7f4962860f0bf13cc419bbd [file] [log] [blame]
"""
Description: This test is to determine if a single
instance ONOS 'cluster' can handle a restart
List of test cases:
CASE1: Compile ONOS and push it to the test machines
CASE2: Assign devices to controllers
CASE21: Assign mastership to controllers
CASE3: Assign intents
CASE4: Ping across added host intents
CASE5: Reading state of ONOS
CASE6: The Failure case.
CASE7: Check state after control plane failure
CASE8: Compare topo
CASE9: Link s3-s28 down
CASE10: Link s3-s28 up
CASE11: Switch down
CASE12: Switch up
CASE13: Clean up
CASE14: start election app on all onos nodes
CASE15: Check that Leadership Election is still functional
CASE16: Install Distributed Primitives app
CASE17: Check for basic functionality with distributed primitives
"""
class HAsingleInstanceRestart:
def __init__( self ):
self.default = ''
def CASE1( self, main ):
"""
CASE1 is to compile ONOS and push it to the test machines
Startup sequence:
cell <name>
onos-verify-cell
NOTE: temporary - onos-remove-raft-logs
onos-uninstall
start mininet
git pull
mvn clean install
onos-package
onos-install -f
onos-wait-for-start
start cli sessions
start tcpdump
"""
import imp
main.log.info( "ONOS Single node cluster restart " +
"HA test - initialization" )
main.case( "Setting up test environment" )
main.caseExplanation = "Setup the test environment including " +\
"installing ONOS, starting Mininet and ONOS" +\
"cli sessions."
# TODO: save all the timers and output them for plotting
# load some variables from the params file
PULLCODE = False
if main.params[ 'Git' ] == 'True':
PULLCODE = True
gitBranch = main.params[ 'branch' ]
cellName = main.params[ 'ENV' ][ 'cellName' ]
main.numCtrls = int( main.params[ 'num_controllers' ] )
if main.ONOSbench.maxNodes:
if main.ONOSbench.maxNodes < main.numCtrls:
main.numCtrls = int( main.ONOSbench.maxNodes )
try:
fileName = "Counters"
path = main.params[ 'imports' ][ 'path' ]
main.Counters = imp.load_source( fileName,
path + fileName + ".py" )
except Exception as e:
main.log.exception( e )
main.cleanup()
main.exit()
main.CLIs = []
main.nodes = []
ipList = []
for i in range( 1, int( main.ONOSbench.maxNodes ) + 1 ):
try:
main.CLIs.append( getattr( main, 'ONOScli' + str( i ) ) )
main.nodes.append( getattr( main, 'ONOS' + str( i ) ) )
ipList.append( main.nodes[ -1 ].ip_address )
except AttributeError:
break
main.step( "Create cell file" )
cellAppString = main.params[ 'ENV' ][ 'appString' ]
main.ONOSbench.createCellFile( main.ONOSbench.ip_address, cellName,
main.Mininet1.ip_address,
cellAppString, ipList )
main.step( "Applying cell variable to environment" )
cellResult = main.ONOSbench.setCell( cellName )
verifyResult = main.ONOSbench.verifyCell()
# FIXME:this is short term fix
main.log.info( "Removing raft logs" )
main.ONOSbench.onosRemoveRaftLogs()
main.log.info( "Uninstalling ONOS" )
for node in main.nodes:
main.ONOSbench.onosUninstall( node.ip_address )
# Make sure ONOS is DEAD
main.log.info( "Killing any ONOS processes" )
killResults = main.TRUE
for node in main.nodes:
killed = main.ONOSbench.onosKill( node.ip_address )
killResults = killResults and killed
cleanInstallResult = main.TRUE
gitPullResult = main.TRUE
main.step( "Starting Mininet" )
# scp topo file to mininet
# TODO: move to params?
topoName = "obelisk.py"
filePath = main.ONOSbench.home + "/tools/test/topos/"
main.ONOSbench.scp( main.Mininet1,
filePath + topoName,
main.Mininet1.home,
direction="to" )
mnResult = main.Mininet1.startNet( )
utilities.assert_equals( expect=main.TRUE, actual=mnResult,
onpass="Mininet Started",
onfail="Error starting Mininet" )
main.step( "Git checkout and pull " + gitBranch )
if PULLCODE:
main.ONOSbench.gitCheckout( gitBranch )
gitPullResult = main.ONOSbench.gitPull()
# values of 1 or 3 are good
utilities.assert_lesser( expect=0, actual=gitPullResult,
onpass="Git pull successful",
onfail="Git pull failed" )
main.ONOSbench.getVersion( report=True )
main.step( "Using mvn clean install" )
cleanInstallResult = main.TRUE
if PULLCODE and gitPullResult == main.TRUE:
cleanInstallResult = main.ONOSbench.cleanInstall()
else:
main.log.warn( "Did not pull new code so skipping mvn " +
"clean install" )
utilities.assert_equals( expect=main.TRUE,
actual=cleanInstallResult,
onpass="MCI successful",
onfail="MCI failed" )
# GRAPHS
# NOTE: important params here:
# job = name of Jenkins job
# Plot Name = Plot-HA, only can be used if multiple plots
# index = The number of the graph under plot name
job = "HAsingleInstanceRestart"
plotName = "Plot-HA"
graphs = '<ac:structured-macro ac:name="html">\n'
graphs += '<ac:plain-text-body><![CDATA[\n'
graphs += '<iframe src="https://onos-jenkins.onlab.us/job/' + job +\
'/plot/' + plotName + '/getPlot?index=0' +\
'&width=500&height=300"' +\
'noborder="0" width="500" height="300" scrolling="yes" ' +\
'seamless="seamless"></iframe>\n'
graphs += ']]></ac:plain-text-body>\n'
graphs += '</ac:structured-macro>\n'
main.log.wiki(graphs)
main.CLIs = []
main.nodes = []
ipList = []
for i in range( 1, main.numCtrls + 1 ):
main.CLIs.append( getattr( main, 'ONOScli' + str( i ) ) )
main.nodes.append( getattr( main, 'ONOS' + str( i ) ) )
ipList.append( main.nodes[ -1 ].ip_address )
main.ONOSbench.createCellFile( main.ONOSbench.ip_address, "SingleHA",
main.Mininet1.ip_address,
cellAppString, ipList[ 0 ] )
cellResult = main.ONOSbench.setCell( "SingleHA" )
verifyResult = main.ONOSbench.verifyCell()
main.step( "Creating ONOS package" )
packageResult = main.ONOSbench.onosPackage()
utilities.assert_equals( expect=main.TRUE, actual=packageResult,
onpass="ONOS package successful",
onfail="ONOS package failed" )
main.step( "Installing ONOS package" )
onosInstallResult = main.ONOSbench.onosInstall(
options="-f", node=main.nodes[0].ip_address )
utilities.assert_equals( expect=main.TRUE, actual=onosInstallResult,
onpass="ONOS install successful",
onfail="ONOS install failed" )
main.step( "Checking if ONOS is up yet" )
for i in range( 2 ):
onos1Isup = main.ONOSbench.isup( main.nodes[0].ip_address )
if onos1Isup:
break
utilities.assert_equals( expect=main.TRUE, actual=onos1Isup,
onpass="ONOS startup successful",
onfail="ONOS startup failed" )
main.log.step( "Starting ONOS CLI sessions" )
cliResults = main.ONOScli1.startOnosCli( main.nodes[0].ip_address )
utilities.assert_equals( expect=main.TRUE, actual=cliResults,
onpass="ONOS cli startup successful",
onfail="ONOS cli startup failed" )
if main.params[ 'tcpdump' ].lower() == "true":
main.step( "Start Packet Capture MN" )
main.Mininet2.startTcpdump(
str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST )
+ "-MN.pcap",
intf=main.params[ 'MNtcpdump' ][ 'intf' ],
port=main.params[ 'MNtcpdump' ][ 'port' ] )
main.step( "App Ids check" )
appCheck = main.ONOScli1.appToIDCheck()
if appCheck != main.TRUE:
main.log.warn( main.CLIs[0].apps() )
main.log.warn( main.CLIs[0].appIDs() )
utilities.assert_equals( expect=main.TRUE, actual=appCheck,
onpass="App Ids seem to be correct",
onfail="Something is wrong with app Ids" )
if cliResults == main.FALSE:
main.log.error( "Failed to start ONOS, stopping test" )
main.cleanup()
main.exit()
def CASE2( self, main ):
"""
Assign devices to controllers
"""
import re
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
main.case( "Assigning devices to controllers" )
main.caseExplanation = "Assign switches to ONOS using 'ovs-vsctl' " +\
"and check that an ONOS node becomes the " +\
"master of the device."
main.step( "Assign switches to controllers" )
ipList = []
for i in range( main.numCtrls ):
ipList.append( main.nodes[ i ].ip_address )
swList = []
for i in range( 1, 29 ):
swList.append( "s" + str( i ) )
main.Mininet1.assignSwController( sw=swList, ip=ipList )
mastershipCheck = main.TRUE
for i in range( 1, 29 ):
response = main.Mininet1.getSwController( "s" + str( i ) )
try:
main.log.info( str( response ) )
except Exception:
main.log.info( repr( response ) )
if re.search( "tcp:" + main.nodes[0].ip_address, response ):
mastershipCheck = mastershipCheck and main.TRUE
else:
mastershipCheck = main.FALSE
if mastershipCheck == main.TRUE:
main.log.info( "Switch mastership assigned correctly" )
utilities.assert_equals(
expect=main.TRUE,
actual=mastershipCheck,
onpass="Switch mastership assigned correctly",
onfail="Switches not assigned correctly to controllers" )
def CASE21( self, main ):
"""
Assign mastership to controllers
"""
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
assert main.CLIs, "main.CLIs not defined"
assert main.nodes, "main.nodes not defined"
main.case( "Assigning Controller roles for switches" )
main.caseExplanation = "Check that ONOS is connected to each " +\
"device. Then manually assign" +\
" mastership to specific ONOS nodes using" +\
" 'device-role'"
main.step( "Assign mastership of switches to specific controllers" )
roleCall = main.TRUE
roleCheck = main.TRUE
try:
for i in range( 1, 29 ): # switches 1 through 28
ip = main.nodes[ 0 ].ip_address # ONOS1
# set up correct variables:
if i == 1:
deviceId = main.ONOScli1.getDevice( "1000" ).get( 'id' )
elif i == 2:
deviceId = main.ONOScli1.getDevice( "2000" ).get( 'id' )
elif i == 3:
deviceId = main.ONOScli1.getDevice( "3000" ).get( 'id' )
elif i == 4:
deviceId = main.ONOScli1.getDevice( "3004" ).get( 'id' )
elif i == 5:
deviceId = main.ONOScli1.getDevice( "5000" ).get( 'id' )
elif i == 6:
deviceId = main.ONOScli1.getDevice( "6000" ).get( 'id' )
elif i == 7:
deviceId = main.ONOScli1.getDevice( "6007" ).get( 'id' )
elif i >= 8 and i <= 17:
dpid = '3' + str( i ).zfill( 3 )
deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
elif i >= 18 and i <= 27:
dpid = '6' + str( i ).zfill( 3 )
deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
elif i == 28:
deviceId = main.ONOScli1.getDevice( "2800" ).get( 'id' )
else:
main.log.error( "You didn't write an else statement for " +
"switch s" + str( i ) )
# Assign switch
assert deviceId, "No device id for s" + str( i ) + " in ONOS"
# TODO: make this controller dynamic
roleCall = roleCall and main.ONOScli1.deviceRole( deviceId,
ip )
# Check assignment
master = main.ONOScli1.getRole( deviceId ).get( 'master' )
if ip in master:
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
main.log.error( "Error, controller " + ip + " is not" +
" master " + "of device " +
str( deviceId ) + ". Master is " +
repr( master ) + "." )
except ( AttributeError, AssertionError ):
main.log.exception( "Something is wrong with ONOS device view" )
main.log.info( main.ONOScli1.devices() )
utilities.assert_equals(
expect=main.TRUE,
actual=roleCall,
onpass="Re-assigned switch mastership to designated controller",
onfail="Something wrong with deviceRole calls" )
main.step( "Check mastership was correctly assigned" )
utilities.assert_equals(
expect=main.TRUE,
actual=roleCheck,
onpass="Switches were successfully reassigned to designated " +
"controller",
onfail="Switches were not successfully reassigned" )
def CASE3( self, main ):
"""
Assign intents
"""
import time
import json
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
# NOTE: we must reinstall intents until we have a persistant intent
# datastore!
main.case( "Adding host Intents" )
main.caseExplanation = "Discover hosts by using pingall then " +\
"assign predetermined host-to-host intents." +\
" After installation, check that the intent" +\
" is distributed to all nodes and the state" +\
" is INSTALLED"
# install onos-app-fwd
main.step( "Install reactive forwarding app" )
installResults = main.CLIs[0].activateApp( "org.onosproject.fwd" )
utilities.assert_equals( expect=main.TRUE, actual=installResults,
onpass="Install fwd successful",
onfail="Install fwd failed" )
main.step( "Check app ids" )
appCheck = main.ONOScli1.appToIDCheck()
if appCheck != main.TRUE:
main.log.warn( main.CLIs[0].apps() )
main.log.warn( main.CLIs[0].appIDs() )
utilities.assert_equals( expect=main.TRUE, actual=appCheck,
onpass="App Ids seem to be correct",
onfail="Something is wrong with app Ids" )
main.step( "Discovering Hosts( Via pingall for now )" )
# FIXME: Once we have a host discovery mechanism, use that instead
# REACTIVE FWD test
pingResult = main.FALSE
for i in range(2): # Retry if pingall fails first time
time1 = time.time()
pingResult = main.Mininet1.pingall()
if i == 0:
utilities.assert_equals(
expect=main.TRUE,
actual=pingResult,
onpass="Reactive Pingall test passed",
onfail="Reactive Pingall failed, " +
"one or more ping pairs failed" )
time2 = time.time()
main.log.info( "Time for pingall: %2f seconds" %
( time2 - time1 ) )
# timeout for fwd flows
time.sleep( 11 )
# uninstall onos-app-fwd
main.step( "Uninstall reactive forwarding app" )
uninstallResult = main.CLIs[0].deactivateApp( "org.onosproject.fwd" )
utilities.assert_equals( expect=main.TRUE, actual=uninstallResult,
onpass="Uninstall fwd successful",
onfail="Uninstall fwd failed" )
main.step( "Check app ids" )
appCheck2 = main.ONOScli1.appToIDCheck()
if appCheck2 != main.TRUE:
main.log.warn( main.CLIs[0].apps() )
main.log.warn( main.CLIs[0].appIDs() )
utilities.assert_equals( expect=main.TRUE, actual=appCheck2,
onpass="App Ids seem to be correct",
onfail="Something is wrong with app Ids" )
main.step( "Add host intents via cli" )
intentIds = []
# TODO: move the host numbers to params
# Maybe look at all the paths we ping?
intentAddResult = True
hostResult = main.TRUE
for i in range( 8, 18 ):
main.log.info( "Adding host intent between h" + str( i ) +
" and h" + str( i + 10 ) )
host1 = "00:00:00:00:00:" + \
str( hex( i )[ 2: ] ).zfill( 2 ).upper()
host2 = "00:00:00:00:00:" + \
str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
# NOTE: getHost can return None
host1Dict = main.ONOScli1.getHost( host1 )
host2Dict = main.ONOScli1.getHost( host2 )
host1Id = None
host2Id = None
if host1Dict and host2Dict:
host1Id = host1Dict.get( 'id', None )
host2Id = host2Dict.get( 'id', None )
if host1Id and host2Id:
tmpId = main.ONOScli1.addHostIntent( host1Id, host2Id )
if tmpId:
main.log.info( "Added intent with id: " + tmpId )
intentIds.append( tmpId )
else:
main.log.error( "addHostIntent returned: " +
repr( tmpId ) )
else:
main.log.error( "Error, getHost() failed for h" + str( i ) +
" and/or h" + str( i + 10 ) )
hosts = main.ONOScli1.hosts()
main.log.warn( "Hosts output: " )
try:
main.log.warn( json.dumps( json.loads( hosts ),
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
except ( ValueError, TypeError ):
main.log.warn( repr( hosts ) )
hostResult = main.FALSE
utilities.assert_equals( expect=main.TRUE, actual=hostResult,
onpass="Found a host id for each host",
onfail="Error looking up host ids" )
intentStart = time.time()
onosIds = main.ONOScli1.getAllIntentsId()
main.log.info( "Submitted intents: " + str( intentIds ) )
main.log.info( "Intents in ONOS: " + str( onosIds ) )
for intent in intentIds:
if intent in onosIds:
pass # intent submitted is in onos
else:
intentAddResult = False
if intentAddResult:
intentStop = time.time()
else:
intentStop = None
# Print the intent states
intents = main.ONOScli1.intents()
intentStates = []
installedCheck = True
main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
count = 0
try:
for intent in json.loads( intents ):
state = intent.get( 'state', None )
if "INSTALLED" not in state:
installedCheck = False
intentId = intent.get( 'id', None )
intentStates.append( ( intentId, state ) )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing intents" )
# add submitted intents not in the store
tmplist = [ i for i, s in intentStates ]
missingIntents = False
for i in intentIds:
if i not in tmplist:
intentStates.append( ( i, " - " ) )
missingIntents = True
intentStates.sort()
for i, s in intentStates:
count += 1
main.log.info( "%-6s%-15s%-15s" %
( str( count ), str( i ), str( s ) ) )
leaders = main.ONOScli1.leaders()
try:
missing = False
if leaders:
parsedLeaders = json.loads( leaders )
main.log.warn( json.dumps( parsedLeaders,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# check for all intent partitions
topics = []
for i in range( 14 ):
topics.append( "intent-partition-" + str( i ) )
main.log.debug( topics )
ONOStopics = [ j['topic'] for j in parsedLeaders ]
for topic in topics:
if topic not in ONOStopics:
main.log.error( "Error: " + topic +
" not in leaders" )
missing = True
else:
main.log.error( "leaders() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing leaders" )
main.log.error( repr( leaders ) )
# Check all nodes
if missing:
response = main.ONOScli1.leaders( jsonFormat=False)
main.log.warn( "ONOS1 leaders output: \n" +
str( response ) )
partitions = main.ONOScli1.partitions()
try:
if partitions :
parsedPartitions = json.loads( partitions )
main.log.warn( json.dumps( parsedPartitions,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check for a leader in all paritions
# TODO check for consistency among nodes
else:
main.log.error( "partitions() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing partitions" )
main.log.error( repr( partitions ) )
pendingMap = main.ONOScli1.pendingMap()
try:
if pendingMap :
parsedPending = json.loads( pendingMap )
main.log.warn( json.dumps( parsedPending,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check something here?
else:
main.log.error( "pendingMap() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing pending map" )
main.log.error( repr( pendingMap ) )
intentAddResult = bool( intentAddResult and not missingIntents and
installedCheck )
if not intentAddResult:
main.log.error( "Error in pushing host intents to ONOS" )
main.step( "Intent Anti-Entropy dispersion" )
for i in range(100):
correct = True
main.log.info( "Submitted intents: " + str( sorted( intentIds ) ) )
for cli in main.CLIs:
onosIds = []
ids = cli.getAllIntentsId()
onosIds.append( ids )
main.log.debug( "Intents in " + cli.name + ": " +
str( sorted( onosIds ) ) )
if sorted( ids ) != sorted( intentIds ):
main.log.warn( "Set of intent IDs doesn't match" )
correct = False
break
else:
intents = json.loads( cli.intents() )
for intent in intents:
if intent[ 'state' ] != "INSTALLED":
main.log.warn( "Intent " + intent[ 'id' ] +
" is " + intent[ 'state' ] )
correct = False
break
if correct:
break
else:
time.sleep(1)
if not intentStop:
intentStop = time.time()
global gossipTime
gossipTime = intentStop - intentStart
main.log.info( "It took about " + str( gossipTime ) +
" seconds for all intents to appear in each node" )
# FIXME: make this time configurable/calculate based off of number of
# nodes and gossip rounds
utilities.assert_greater_equals(
expect=40, actual=gossipTime,
onpass="ECM anti-entropy for intents worked within " +
"expected time",
onfail="Intent ECM anti-entropy took too long" )
if gossipTime <= 40:
intentAddResult = True
if not intentAddResult or "key" in pendingMap:
import time
installedCheck = True
main.log.info( "Sleeping 60 seconds to see if intents are found" )
time.sleep( 60 )
onosIds = main.ONOScli1.getAllIntentsId()
main.log.info( "Submitted intents: " + str( intentIds ) )
main.log.info( "Intents in ONOS: " + str( onosIds ) )
# Print the intent states
intents = main.ONOScli1.intents()
intentStates = []
main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
count = 0
try:
for intent in json.loads( intents ):
# Iter through intents of a node
state = intent.get( 'state', None )
if "INSTALLED" not in state:
installedCheck = False
intentId = intent.get( 'id', None )
intentStates.append( ( intentId, state ) )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing intents" )
# add submitted intents not in the store
tmplist = [ i for i, s in intentStates ]
for i in intentIds:
if i not in tmplist:
intentStates.append( ( i, " - " ) )
intentStates.sort()
for i, s in intentStates:
count += 1
main.log.info( "%-6s%-15s%-15s" %
( str( count ), str( i ), str( s ) ) )
leaders = main.ONOScli1.leaders()
try:
missing = False
if leaders:
parsedLeaders = json.loads( leaders )
main.log.warn( json.dumps( parsedLeaders,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# check for all intent partitions
# check for election
topics = []
for i in range( 14 ):
topics.append( "intent-partition-" + str( i ) )
# FIXME: this should only be after we start the app
topics.append( "org.onosproject.election" )
main.log.debug( topics )
ONOStopics = [ j['topic'] for j in parsedLeaders ]
for topic in topics:
if topic not in ONOStopics:
main.log.error( "Error: " + topic +
" not in leaders" )
missing = True
else:
main.log.error( "leaders() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing leaders" )
main.log.error( repr( leaders ) )
# Check all nodes
if missing:
response = main.ONOScli1.leaders( jsonFormat=False)
main.log.warn( "ONOS1 leaders output: \n" +
str( response ) )
partitions = main.ONOScli1.partitions()
try:
if partitions :
parsedPartitions = json.loads( partitions )
main.log.warn( json.dumps( parsedPartitions,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check for a leader in all paritions
# TODO check for consistency among nodes
else:
main.log.error( "partitions() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing partitions" )
main.log.error( repr( partitions ) )
pendingMap = main.ONOScli1.pendingMap()
try:
if pendingMap :
parsedPending = json.loads( pendingMap )
main.log.warn( json.dumps( parsedPending,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check something here?
else:
main.log.error( "pendingMap() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing pending map" )
main.log.error( repr( pendingMap ) )
def CASE4( self, main ):
"""
Ping across added host intents
"""
import json
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
main.case( "Verify connectivity by sendind traffic across Intents" )
main.caseExplanation = "Ping across added host intents to check " +\
"functionality and check the state of " +\
"the intent"
main.step( "Ping across added host intents" )
PingResult = main.TRUE
for i in range( 8, 18 ):
ping = main.Mininet1.pingHost( src="h" + str( i ),
target="h" + str( i + 10 ) )
PingResult = PingResult and ping
if ping == main.FALSE:
main.log.warn( "Ping failed between h" + str( i ) +
" and h" + str( i + 10 ) )
elif ping == main.TRUE:
main.log.info( "Ping test passed!" )
# Don't set PingResult or you'd override failures
if PingResult == main.FALSE:
main.log.error(
"Intents have not been installed correctly, pings failed." )
# TODO: pretty print
main.log.warn( "ONOS1 intents: " )
try:
tmpIntents = main.ONOScli1.intents()
main.log.warn( json.dumps( json.loads( tmpIntents ),
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
except ( ValueError, TypeError ):
main.log.warn( repr( tmpIntents ) )
utilities.assert_equals(
expect=main.TRUE,
actual=PingResult,
onpass="Intents have been installed correctly and pings work",
onfail="Intents have not been installed correctly, pings failed." )
main.step( "Check Intent state" )
installedCheck = True
# Print the intent states
intents = main.ONOScli1.intents()
intentStates = []
main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
count = 0
# Iter through intents of a node
try:
for intent in json.loads( intents ):
state = intent.get( 'state', None )
if "INSTALLED" not in state:
installedCheck = False
intentId = intent.get( 'id', None )
intentStates.append( ( intentId, state ) )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing intents." )
# Print states
intentStates.sort()
for i, s in intentStates:
count += 1
main.log.info( "%-6s%-15s%-15s" %
( str( count ), str( i ), str( s ) ) )
utilities.assert_equals( expect=True, actual=installedCheck,
onpass="Intents are all INSTALLED",
onfail="Intents are not all in " +
"INSTALLED state" )
main.step( "Check leadership of topics" )
leaders = main.ONOScli1.leaders()
topicCheck = main.TRUE
try:
if leaders:
parsedLeaders = json.loads( leaders )
main.log.warn( json.dumps( parsedLeaders,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# check for all intent partitions
# check for election
# TODO: Look at Devices as topics now that it uses this system
topics = []
for i in range( 14 ):
topics.append( "intent-partition-" + str( i ) )
# FIXME: this should only be after we start the app
# FIXME: topics.append( "org.onosproject.election" )
# Print leaders output
main.log.debug( topics )
ONOStopics = [ j['topic'] for j in parsedLeaders ]
for topic in topics:
if topic not in ONOStopics:
main.log.error( "Error: " + topic +
" not in leaders" )
topicCheck = main.FALSE
else:
main.log.error( "leaders() returned None" )
topicCheck = main.FALSE
except ( ValueError, TypeError ):
topicCheck = main.FALSE
main.log.exception( "Error parsing leaders" )
main.log.error( repr( leaders ) )
# TODO: Check for a leader of these topics
utilities.assert_equals( expect=main.TRUE, actual=topicCheck,
onpass="intent Partitions is in leaders",
onfail="Some topics were lost " )
# Print partitions
partitions = main.ONOScli1.partitions()
try:
if partitions :
parsedPartitions = json.loads( partitions )
main.log.warn( json.dumps( parsedPartitions,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check for a leader in all paritions
# TODO check for consistency among nodes
else:
main.log.error( "partitions() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing partitions" )
main.log.error( repr( partitions ) )
# Print Pending Map
pendingMap = main.ONOScli1.pendingMap()
try:
if pendingMap :
parsedPending = json.loads( pendingMap )
main.log.warn( json.dumps( parsedPending,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check something here?
else:
main.log.error( "pendingMap() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing pending map" )
main.log.error( repr( pendingMap ) )
if not installedCheck:
main.log.info( "Waiting 60 seconds to see if the state of " +
"intents change" )
time.sleep( 60 )
# Print the intent states
intents = main.ONOScli1.intents()
intentStates = []
main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
count = 0
# Iter through intents of a node
try:
for intent in json.loads( intents ):
state = intent.get( 'state', None )
if "INSTALLED" not in state:
installedCheck = False
intentId = intent.get( 'id', None )
intentStates.append( ( intentId, state ) )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing intents." )
intentStates.sort()
for i, s in intentStates:
count += 1
main.log.info( "%-6s%-15s%-15s" %
( str( count ), str( i ), str( s ) ) )
leaders = main.ONOScli1.leaders()
try:
missing = False
if leaders:
parsedLeaders = json.loads( leaders )
main.log.warn( json.dumps( parsedLeaders,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# check for all intent partitions
# check for election
topics = []
for i in range( 14 ):
topics.append( "intent-partition-" + str( i ) )
# FIXME: this should only be after we start the app
topics.append( "org.onosproject.election" )
main.log.debug( topics )
ONOStopics = [ j['topic'] for j in parsedLeaders ]
for topic in topics:
if topic not in ONOStopics:
main.log.error( "Error: " + topic +
" not in leaders" )
missing = True
else:
main.log.error( "leaders() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing leaders" )
main.log.error( repr( leaders ) )
if missing:
response = main.ONOScli1.leaders( jsonFormat=False)
main.log.warn( "ONOS1 leaders output: \n" +
str( response ) )
partitions = main.ONOScli1.partitions()
try:
if partitions :
parsedPartitions = json.loads( partitions )
main.log.warn( json.dumps( parsedPartitions,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check for a leader in all paritions
# TODO check for consistency among nodes
else:
main.log.error( "partitions() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing partitions" )
main.log.error( repr( partitions ) )
pendingMap = main.ONOScli1.pendingMap()
try:
if pendingMap :
parsedPending = json.loads( pendingMap )
main.log.warn( json.dumps( parsedPending,
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
# TODO check something here?
else:
main.log.error( "pendingMap() returned None" )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing pending map" )
main.log.error( repr( pendingMap ) )
# Print flowrules
main.log.debug( main.CLIs[0].flows( jsonFormat=False ) )
main.step( "Wait a minute then ping again" )
# the wait is above
PingResult = main.TRUE
for i in range( 8, 18 ):
ping = main.Mininet1.pingHost( src="h" + str( i ),
target="h" + str( i + 10 ) )
PingResult = PingResult and ping
if ping == main.FALSE:
main.log.warn( "Ping failed between h" + str( i ) +
" and h" + str( i + 10 ) )
elif ping == main.TRUE:
main.log.info( "Ping test passed!" )
# Don't set PingResult or you'd override failures
if PingResult == main.FALSE:
main.log.error(
"Intents have not been installed correctly, pings failed." )
# TODO: pretty print
main.log.warn( "ONOS1 intents: " )
try:
tmpIntents = main.ONOScli1.intents()
main.log.warn( json.dumps( json.loads( tmpIntents ),
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
except ( ValueError, TypeError ):
main.log.warn( repr( tmpIntents ) )
utilities.assert_equals(
expect=main.TRUE,
actual=PingResult,
onpass="Intents have been installed correctly and pings work",
onfail="Intents have not been installed correctly, pings failed." )
def CASE5( self, main ):
"""
Reading state of ONOS
"""
import json
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
main.case( "Setting up and gathering data for current state" )
# The general idea for this test case is to pull the state of
# ( intents,flows, topology,... ) from each ONOS node
# We can then compare them with each other and also with past states
main.step( "Check that each switch has a master" )
global mastershipState
mastershipState = '[]'
# Assert that each device has a master
rolesNotNull = main.ONOScli1.rolesNotNull()
utilities.assert_equals(
expect=main.TRUE,
actual=rolesNotNull,
onpass="Each device has a master",
onfail="Some devices don't have a master assigned" )
main.step( "Get the Mastership of each switch" )
ONOS1Mastership = main.ONOScli1.roles()
# TODO: Make this a meaningful check
if "Error" in ONOS1Mastership or not ONOS1Mastership:
main.log.error( "Error in getting ONOS roles" )
main.log.warn(
"ONOS1 mastership response: " +
repr( ONOS1Mastership ) )
consistentMastership = main.FALSE
else:
mastershipState = ONOS1Mastership
consistentMastership = main.TRUE
main.step( "Get the intents from each controller" )
global intentState
intentState = []
ONOS1Intents = main.ONOScli1.intents( jsonFormat=True )
intentCheck = main.FALSE
if "Error" in ONOS1Intents or not ONOS1Intents:
main.log.error( "Error in getting ONOS intents" )
main.log.warn( "ONOS1 intents response: " + repr( ONOS1Intents ) )
else:
intentCheck = main.TRUE
main.step( "Get the flows from each controller" )
global flowState
flowState = []
flowCheck = main.FALSE
ONOS1Flows = main.ONOScli1.flows( jsonFormat=True )
if "Error" in ONOS1Flows or not ONOS1Flows:
main.log.error( "Error in getting ONOS flows" )
main.log.warn( "ONOS1 flows repsponse: " + ONOS1Flows )
else:
# TODO: Do a better check, maybe compare flows on switches?
flowState = ONOS1Flows
flowCheck = main.TRUE
main.step( "Get the OF Table entries" )
global flows
flows = []
for i in range( 1, 29 ):
flows.append( main.Mininet1.getFlowTable( 1.3, "s" + str( i ) ) )
if flowCheck == main.FALSE:
for table in flows:
main.log.warn( table )
# TODO: Compare switch flow tables with ONOS flow tables
main.step( "Collecting topology information from ONOS" )
devices = []
devices.append( main.ONOScli1.devices() )
hosts = []
hosts.append( json.loads( main.ONOScli1.hosts() ) )
ports = []
ports.append( main.ONOScli1.ports() )
links = []
links.append( main.ONOScli1.links() )
clusters = []
clusters.append( main.ONOScli1.clusters() )
main.step( "Each host has an IP address" )
ipResult = main.TRUE
for controller in range( 0, len( hosts ) ):
controllerStr = str( controller + 1 )
for host in hosts[ controller ]:
if host is None or host.get( 'ipAddresses', [] ) == []:
main.log.error(
"DEBUG:Error with host ips on controller" +
controllerStr + ": " + str( host ) )
ipResult = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=ipResult,
onpass="The ips of the hosts aren't empty",
onfail="The ip of at least one host is missing" )
# there should always only be one cluster
main.step( "There is only one dataplane cluster" )
try:
numClusters = len( json.loads( clusters[ 0 ] ) )
except ( ValueError, TypeError ):
main.log.exception( "Error parsing clusters[0]: " +
repr( clusters[ 0 ] ) )
clusterResults = main.FALSE
if numClusters == 1:
clusterResults = main.TRUE
utilities.assert_equals(
expect=1,
actual=numClusters,
onpass="ONOS shows 1 SCC",
onfail="ONOS shows " + str( numClusters ) + " SCCs" )
main.step( "Comparing ONOS topology to MN" )
devicesResults = main.TRUE
linksResults = main.TRUE
hostsResults = main.TRUE
mnSwitches = main.Mininet1.getSwitches()
mnLinks = main.Mininet1.getLinks()
mnHosts = main.Mininet1.getHosts()
for controller in range( main.numCtrls ):
controllerStr = str( controller + 1 )
if devices[ controller ] and ports[ controller ] and\
"Error" not in devices[ controller ] and\
"Error" not in ports[ controller ]:
currentDevicesResult = main.Mininet1.compareSwitches(
mnSwitches,
json.loads( devices[ controller ] ),
json.loads( ports[ controller ] ) )
else:
currentDevicesResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentDevicesResult,
onpass="ONOS" + controllerStr +
" Switches view is correct",
onfail="ONOS" + controllerStr +
" Switches view is incorrect" )
if links[ controller ] and "Error" not in links[ controller ]:
currentLinksResult = main.Mininet1.compareLinks(
mnSwitches, mnLinks,
json.loads( links[ controller ] ) )
else:
currentLinksResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentLinksResult,
onpass="ONOS" + controllerStr +
" links view is correct",
onfail="ONOS" + controllerStr +
" links view is incorrect" )
if hosts[ controller ] or "Error" not in hosts[ controller ]:
currentHostsResult = main.Mininet1.compareHosts(
mnHosts,
hosts[ controller ] )
else:
currentHostsResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentHostsResult,
onpass="ONOS" + controllerStr +
" hosts exist in Mininet",
onfail="ONOS" + controllerStr +
" hosts don't match Mininet" )
devicesResults = devicesResults and currentDevicesResult
linksResults = linksResults and currentLinksResult
hostsResults = hostsResults and currentHostsResult
main.step( "Device information is correct" )
utilities.assert_equals(
expect=main.TRUE,
actual=devicesResults,
onpass="Device information is correct",
onfail="Device information is incorrect" )
main.step( "Links are correct" )
utilities.assert_equals(
expect=main.TRUE,
actual=linksResults,
onpass="Link are correct",
onfail="Links are incorrect" )
main.step( "Hosts are correct" )
utilities.assert_equals(
expect=main.TRUE,
actual=hostsResults,
onpass="Hosts are correct",
onfail="Hosts are incorrect" )
def CASE6( self, main ):
"""
The Failure case.
"""
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
# Reset non-persistent variables
try:
iCounterValue = 0
except NameError:
main.log.error( "iCounterValue not defined, setting to 0" )
iCounterValue = 0
main.case( "Restart ONOS node" )
main.caseExplanation = "Killing ONOS process and restart cli " +\
"sessions once onos is up."
main.step( "Killing ONOS processes" )
killResult = main.ONOSbench.onosKill( main.nodes[0].ip_address )
start = time.time()
utilities.assert_equals( expect=main.TRUE, actual=killResult,
onpass="ONOS Killed",
onfail="Error killing ONOS" )
main.step( "Checking if ONOS is up yet" )
count = 0
while count < 10:
onos1Isup = main.ONOSbench.isup( main.nodes[0].ip_address )
if onos1Isup == main.TRUE:
elapsed = time.time() - start
break
else:
count = count + 1
utilities.assert_equals( expect=main.TRUE, actual=onos1Isup,
onpass="ONOS is back up",
onfail="ONOS failed to start" )
main.log.step( "Starting ONOS CLI sessions" )
cliResults = main.ONOScli1.startOnosCli( main.nodes[0].ip_address )
utilities.assert_equals( expect=main.TRUE, actual=cliResults,
onpass="ONOS cli startup successful",
onfail="ONOS cli startup failed" )
if elapsed:
main.log.info( "ESTIMATE: ONOS took %s seconds to restart" %
str( elapsed ) )
main.restartTime = elapsed
else:
main.restartTime = -1
time.sleep( 5 )
# rerun on election apps
main.ONOScli1.electionTestRun()
def CASE7( self, main ):
"""
Check state after ONOS failure
"""
import json
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
main.case( "Running ONOS Constant State Tests" )
main.step( "Check that each switch has a master" )
# Assert that each device has a master
rolesNotNull = main.ONOScli1.rolesNotNull()
utilities.assert_equals(
expect=main.TRUE,
actual=rolesNotNull,
onpass="Each device has a master",
onfail="Some devices don't have a master assigned" )
main.step( "Check if switch roles are consistent across all nodes" )
ONOS1Mastership = main.ONOScli1.roles()
# FIXME: Refactor this whole case for single instance
if "Error" in ONOS1Mastership or not ONOS1Mastership:
main.log.error( "Error in getting ONOS mastership" )
main.log.warn( "ONOS1 mastership response: " +
repr( ONOS1Mastership ) )
consistentMastership = main.FALSE
else:
consistentMastership = main.TRUE
utilities.assert_equals(
expect=main.TRUE,
actual=consistentMastership,
onpass="Switch roles are consistent across all ONOS nodes",
onfail="ONOS nodes have different views of switch roles" )
description2 = "Compare switch roles from before failure"
main.step( description2 )
currentJson = json.loads( ONOS1Mastership )
oldJson = json.loads( mastershipState )
mastershipCheck = main.TRUE
for i in range( 1, 29 ):
switchDPID = str(
main.Mininet1.getSwitchDPID( switch="s" + str( i ) ) )
current = [ switch[ 'master' ] for switch in currentJson
if switchDPID in switch[ 'id' ] ]
old = [ switch[ 'master' ] for switch in oldJson
if switchDPID in switch[ 'id' ] ]
if current == old:
mastershipCheck = mastershipCheck and main.TRUE
else:
main.log.warn( "Mastership of switch %s changed" % switchDPID )
mastershipCheck = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=mastershipCheck,
onpass="Mastership of Switches was not changed",
onfail="Mastership of some switches changed" )
mastershipCheck = mastershipCheck and consistentMastership
main.step( "Get the intents and compare across all nodes" )
ONOS1Intents = main.ONOScli1.intents( jsonFormat=True )
intentCheck = main.FALSE
if "Error" in ONOS1Intents or not ONOS1Intents:
main.log.error( "Error in getting ONOS intents" )
main.log.warn( "ONOS1 intents response: " + repr( ONOS1Intents ) )
else:
intentCheck = main.TRUE
utilities.assert_equals(
expect=main.TRUE,
actual=intentCheck,
onpass="Intents are consistent across all ONOS nodes",
onfail="ONOS nodes have different views of intents" )
# Print the intent states
intents = []
intents.append( ONOS1Intents )
intentStates = []
for node in intents: # Iter through ONOS nodes
nodeStates = []
# Iter through intents of a node
for intent in json.loads( node ):
nodeStates.append( intent[ 'state' ] )
intentStates.append( nodeStates )
out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
main.log.info( dict( out ) )
# NOTE: Store has no durability, so intents are lost across system
# restarts
"""
main.step( "Compare current intents with intents before the failure" )
# NOTE: this requires case 5 to pass for intentState to be set.
# maybe we should stop the test if that fails?
sameIntents = main.FALSE
if intentState and intentState == ONOSIntents[ 0 ]:
sameIntents = main.TRUE
main.log.info( "Intents are consistent with before failure" )
# TODO: possibly the states have changed? we may need to figure out
# what the acceptable states are
elif len( intentState ) == len( ONOSIntents[ 0 ] ):
sameIntents = main.TRUE
try:
before = json.loads( intentState )
after = json.loads( ONOSIntents[ 0 ] )
for intent in before:
if intent not in after:
sameIntents = main.FALSE
main.log.debug( "Intent is not currently in ONOS " +
"(at least in the same form):" )
main.log.debug( json.dumps( intent ) )
except ( ValueError, TypeError ):
main.log.exception( "Exception printing intents" )
main.log.debug( repr( ONOSIntents[0] ) )
main.log.debug( repr( intentState ) )
if sameIntents == main.FALSE:
try:
main.log.debug( "ONOS intents before: " )
main.log.debug( json.dumps( json.loads( intentState ),
sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
main.log.debug( "Current ONOS intents: " )
main.log.debug( json.dumps( json.loads( ONOSIntents[ 0 ] ),
sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
except ( ValueError, TypeError ):
main.log.exception( "Exception printing intents" )
main.log.debug( repr( ONOSIntents[0] ) )
main.log.debug( repr( intentState ) )
utilities.assert_equals(
expect=main.TRUE,
actual=sameIntents,
onpass="Intents are consistent with before failure",
onfail="The Intents changed during failure" )
intentCheck = intentCheck and sameIntents
"""
main.step( "Get the OF Table entries and compare to before " +
"component failure" )
FlowTables = main.TRUE
flows2 = []
for i in range( 28 ):
main.log.info( "Checking flow table on s" + str( i + 1 ) )
tmpFlows = main.Mininet1.getFlowTable( 1.3, "s" + str( i + 1 ) )
flows2.append( tmpFlows )
tempResult = main.Mininet1.flowComp(
flow1=flows[ i ],
flow2=tmpFlows )
FlowTables = FlowTables and tempResult
if FlowTables == main.FALSE:
main.log.info( "Differences in flow table for switch: s" +
str( i + 1 ) )
utilities.assert_equals(
expect=main.TRUE,
actual=FlowTables,
onpass="No changes were found in the flow tables",
onfail="Changes were found in the flow tables" )
main.step( "Leadership Election is still functional" )
# Test of LeadershipElection
leader = main.nodes[0].ip_address
leaderResult = main.TRUE
for controller in range( 1, main.numCtrls + 1 ):
# loop through ONOScli handlers
node = getattr( main, ( 'ONOScli' + str( controller ) ) )
leaderN = node.electionTestLeader()
# verify leader is ONOS1
# NOTE even though we restarted ONOS, it is the only one so onos 1
# must be leader
if leaderN == leader:
# all is well
pass
elif leaderN == main.FALSE:
# error in response
main.log.error( "Something is wrong with " +
"electionTestLeader function, check the" +
" error logs" )
leaderResult = main.FALSE
elif leader != leaderN:
leaderResult = main.FALSE
main.log.error( "ONOS" + str( controller ) + " sees " +
str( leaderN ) +
" as the leader of the election app. " +
"Leader should be " + str( leader ) )
utilities.assert_equals(
expect=main.TRUE,
actual=leaderResult,
onpass="Leadership election passed",
onfail="Something went wrong with Leadership election" )
def CASE8( self, main ):
"""
Compare topo
"""
import json
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
main.case( "Compare ONOS Topology view to Mininet topology" )
main.caseExplanation = "Compare topology objects between Mininet" +\
" and ONOS"
main.step( "Comparing ONOS topology to MN" )
devicesResults = main.TRUE
linksResults = main.TRUE
hostsResults = main.TRUE
hostAttachmentResults = True
topoResult = main.FALSE
elapsed = 0
count = 0
main.step( "Collecting topology information from ONOS" )
startTime = time.time()
# Give time for Gossip to work
while topoResult == main.FALSE and elapsed < 60:
count += 1
cliStart = time.time()
devices = []
devices.append( main.ONOScli1.devices() )
hosts = []
hosts.append( json.loads( main.ONOScli1.hosts() ) )
ipResult = main.TRUE
for controller in range( 0, len( hosts ) ):
controllerStr = str( controller + 1 )
for host in hosts[ controller ]:
if host is None or host.get( 'ipAddresses', [] ) == []:
main.log.error(
"DEBUG:Error with host ips on controller" +
controllerStr + ": " + str( host ) )
ipResult = main.FALSE
ports = []
ports.append( main.ONOScli1.ports() )
links = []
links.append( main.ONOScli1.links() )
clusters = []
clusters.append( main.ONOScli1.clusters() )
elapsed = time.time() - startTime
cliTime = time.time() - cliStart
print "CLI time: " + str( cliTime )
mnSwitches = main.Mininet1.getSwitches()
mnLinks = main.Mininet1.getLinks()
mnHosts = main.Mininet1.getHosts()
for controller in range( main.numCtrls ):
controllerStr = str( controller + 1 )
if devices[ controller ] and ports[ controller ] and\
"Error" not in devices[ controller ] and\
"Error" not in ports[ controller ]:
currentDevicesResult = main.Mininet1.compareSwitches(
mnSwitches,
json.loads( devices[ controller ] ),
json.loads( ports[ controller ] ) )
else:
currentDevicesResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentDevicesResult,
onpass="ONOS" + controllerStr +
" Switches view is correct",
onfail="ONOS" + controllerStr +
" Switches view is incorrect" )
if links[ controller ] and "Error" not in links[ controller ]:
currentLinksResult = main.Mininet1.compareLinks(
mnSwitches, mnLinks,
json.loads( links[ controller ] ) )
else:
currentLinksResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentLinksResult,
onpass="ONOS" + controllerStr +
" links view is correct",
onfail="ONOS" + controllerStr +
" links view is incorrect" )
if hosts[ controller ] or "Error" not in hosts[ controller ]:
currentHostsResult = main.Mininet1.compareHosts(
mnHosts,
hosts[ controller ] )
else:
currentHostsResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentHostsResult,
onpass="ONOS" + controllerStr +
" hosts exist in Mininet",
onfail="ONOS" + controllerStr +
" hosts don't match Mininet" )
# CHECKING HOST ATTACHMENT POINTS
hostAttachment = True
zeroHosts = False
# FIXME: topo-HA/obelisk specific mappings:
# key is mac and value is dpid
mappings = {}
for i in range( 1, 29 ): # hosts 1 through 28
# set up correct variables:
macId = "00:" * 5 + hex( i ).split( "0x" )[1].upper().zfill(2)
if i == 1:
deviceId = "1000".zfill(16)
elif i == 2:
deviceId = "2000".zfill(16)
elif i == 3:
deviceId = "3000".zfill(16)
elif i == 4:
deviceId = "3004".zfill(16)
elif i == 5:
deviceId = "5000".zfill(16)
elif i == 6:
deviceId = "6000".zfill(16)
elif i == 7:
deviceId = "6007".zfill(16)
elif i >= 8 and i <= 17:
dpid = '3' + str( i ).zfill( 3 )
deviceId = dpid.zfill(16)
elif i >= 18 and i <= 27:
dpid = '6' + str( i ).zfill( 3 )
deviceId = dpid.zfill(16)
elif i == 28:
deviceId = "2800".zfill(16)
mappings[ macId ] = deviceId
if hosts[ controller ] or "Error" not in hosts[ controller ]:
if hosts[ controller ] == []:
main.log.warn( "There are no hosts discovered" )
zeroHosts = True
else:
for host in hosts[ controller ]:
mac = None
location = None
device = None
port = None
try:
mac = host.get( 'mac' )
assert mac, "mac field could not be found for this host object"
location = host.get( 'location' )
assert location, "location field could not be found for this host object"
# Trim the protocol identifier off deviceId
device = str( location.get( 'elementId' ) ).split(':')[1]
assert device, "elementId field could not be found for this host location object"
port = location.get( 'port' )
assert port, "port field could not be found for this host location object"
# Now check if this matches where they should be
if mac and device and port:
if str( port ) != "1":
main.log.error( "The attachment port is incorrect for " +
"host " + str( mac ) +
". Expected: 1 Actual: " + str( port) )
hostAttachment = False
if device != mappings[ str( mac ) ]:
main.log.error( "The attachment device is incorrect for " +
"host " + str( mac ) +
". Expected: " + mappings[ str( mac ) ] +
" Actual: " + device )
hostAttachment = False
else:
hostAttachment = False
except AssertionError:
main.log.exception( "Json object not as expected" )
main.log.error( repr( host ) )
hostAttachment = False
else:
main.log.error( "No hosts json output or \"Error\"" +
" in output. hosts = " +
repr( hosts[ controller ] ) )
if zeroHosts is False:
hostAttachment = True
devicesResults = devicesResults and currentDevicesResult
linksResults = linksResults and currentLinksResult
hostsResults = hostsResults and currentHostsResult
hostAttachmentResults = hostAttachmentResults and\
hostAttachment
# "consistent" results don't make sense for single instance
# there should always only be one cluster
numClusters = len( json.loads( clusters[ 0 ] ) )
clusterResults = main.FALSE
if numClusters == 1:
clusterResults = main.TRUE
utilities.assert_equals(
expect=1,
actual=numClusters,
onpass="ONOS shows 1 SCC",
onfail="ONOS shows " + str( numClusters ) + " SCCs" )
topoResult = ( devicesResults and linksResults
and hostsResults and ipResult and clusterResults and
hostAttachmentResults )
topoResult = topoResult and int( count <= 2 )
note = "note it takes about " + str( int( cliTime ) ) + \
" seconds for the test to make all the cli calls to fetch " +\
"the topology from each ONOS instance"
main.log.info(
"Very crass estimate for topology discovery/convergence( " +
str( note ) + " ): " + str( elapsed ) + " seconds, " +
str( count ) + " tries" )
utilities.assert_equals( expect=main.TRUE, actual=topoResult,
onpass="Topology Check Test successful",
onfail="Topology Check Test NOT successful" )
def CASE9( self, main ):
"""
Link s3-s28 down
"""
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
# NOTE: You should probably run a topology check after this
linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
description = "Turn off a link to ensure that Link Discovery " +\
"is working properly"
main.case( description )
main.step( "Kill Link between s3 and s28" )
LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" )
main.log.info( "Waiting " + str( linkSleep ) +
" seconds for link down to be discovered" )
time.sleep( linkSleep )
utilities.assert_equals( expect=main.TRUE, actual=LinkDown,
onpass="Link down successful",
onfail="Failed to bring link down" )
# TODO do some sort of check here
def CASE10( self, main ):
"""
Link s3-s28 up
"""
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
# NOTE: You should probably run a topology check after this
linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
description = "Restore a link to ensure that Link Discovery is " + \
"working properly"
main.case( description )
main.step( "Bring link between s3 and s28 back up" )
LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" )
main.log.info( "Waiting " + str( linkSleep ) +
" seconds for link up to be discovered" )
time.sleep( linkSleep )
utilities.assert_equals( expect=main.TRUE, actual=LinkUp,
onpass="Link up successful",
onfail="Failed to bring link up" )
# TODO do some sort of check here
def CASE11( self, main ):
"""
Switch Down
"""
# NOTE: You should probably run a topology check after this
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
description = "Killing a switch to ensure it is discovered correctly"
main.case( description )
switch = main.params[ 'kill' ][ 'switch' ]
switchDPID = main.params[ 'kill' ][ 'dpid' ]
# TODO: Make this switch parameterizable
main.step( "Kill " + switch )
main.log.info( "Deleting " + switch )
main.Mininet1.delSwitch( switch )
main.log.info( "Waiting " + str( switchSleep ) +
" seconds for switch down to be discovered" )
time.sleep( switchSleep )
device = main.ONOScli1.getDevice( dpid=switchDPID )
# Peek at the deleted switch
main.log.warn( str( device ) )
result = main.FALSE
if device and device[ 'available' ] is False:
result = main.TRUE
utilities.assert_equals( expect=main.TRUE, actual=result,
onpass="Kill switch successful",
onfail="Failed to kill switch?" )
def CASE12( self, main ):
"""
Switch Up
"""
# NOTE: You should probably run a topology check after this
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
switch = main.params[ 'kill' ][ 'switch' ]
switchDPID = main.params[ 'kill' ][ 'dpid' ]
links = main.params[ 'kill' ][ 'links' ].split()
description = "Adding a switch to ensure it is discovered correctly"
main.case( description )
main.step( "Add back " + switch )
main.Mininet1.addSwitch( switch, dpid=switchDPID )
for peer in links:
main.Mininet1.addLink( switch, peer )
ipList = []
for i in range( main.numCtrls ):
ipList.append( main.nodes[ i ].ip_address )
main.Mininet1.assignSwController( sw=switch, ip=ipList )
main.log.info( "Waiting " + str( switchSleep ) +
" seconds for switch up to be discovered" )
time.sleep( switchSleep )
device = main.ONOScli1.getDevice( dpid=switchDPID )
# Peek at the deleted switch
main.log.warn( str( device ) )
result = main.FALSE
if device and device[ 'available' ]:
result = main.TRUE
utilities.assert_equals( expect=main.TRUE, actual=result,
onpass="add switch successful",
onfail="Failed to add switch?" )
def CASE13( self, main ):
"""
Clean up
"""
import os
import time
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
# printing colors to terminal
colors = { 'cyan': '\033[96m', 'purple': '\033[95m',
'blue': '\033[94m', 'green': '\033[92m',
'yellow': '\033[93m', 'red': '\033[91m', 'end': '\033[0m' }
main.case( "Test Cleanup" )
main.step( "Killing tcpdumps" )
main.Mininet2.stopTcpdump()
testname = main.TEST
if main.params[ 'BACKUP' ] == "True":
main.step( "Copying MN pcap and ONOS log files to test station" )
teststationUser = main.params[ 'BACKUP' ][ 'TESTONUSER' ]
teststationIP = main.params[ 'BACKUP' ][ 'TESTONIP' ]
# NOTE: MN Pcap file is being saved to ~/packet_captures
# scp this file as MN and TestON aren't necessarily the same vm
# FIXME: scp
# mn files
# TODO: Load these from params
# NOTE: must end in /
logFolder = "/opt/onos/log/"
logFiles = [ "karaf.log", "karaf.log.1" ]
# NOTE: must end in /
dstDir = "~/packet_captures/"
for f in logFiles:
main.ONOSbench.handle.sendline( "scp sdn@" + main.nodes[0].ip_address + ":" +
logFolder + f + " " +
teststationUser + "@" +
teststationIP + ":" + dstDir +
str( testname ) + "-ONOS1-" + f )
main.ONOSbench.handle.expect( "\$" )
# std*.log's
# NOTE: must end in /
logFolder = "/opt/onos/var/"
logFiles = [ "stderr.log", "stdout.log" ]
# NOTE: must end in /
dstDir = "~/packet_captures/"
for f in logFiles:
main.ONOSbench.handle.sendline( "scp sdn@" + main.nodes[0].ip_address + ":" +
logFolder + f + " " +
teststationUser + "@" +
teststationIP + ":" + dstDir +
str( testname ) + "-ONOS1-" + f )
main.ONOSbench.handle.expect( "\$" )
# sleep so scp can finish
time.sleep( 10 )
main.step( "Packing and rotating pcap archives" )
os.system( "~/TestON/dependencies/rotate.sh " + str( testname ) )
main.step( "Stopping Mininet" )
mnResult = main.Mininet1.stopNet()
utilities.assert_equals( expect=main.TRUE, actual=mnResult,
onpass="Mininet stopped",
onfail="MN cleanup NOT successful" )
main.step( "Checking ONOS Logs for errors" )
print colors[ 'purple' ] + "Checking logs for errors on ONOS1:" + \
colors[ 'end' ]
print main.ONOSbench.checkLogs( main.nodes[0].ip_address, restart=True )
try:
timerLog = open( main.logdir + "/Timers.csv", 'w')
# Overwrite with empty line and close
labels = "Gossip Intents, Restart"
data = str( gossipTime ) + ", " + str( main.restartTime )
timerLog.write( labels + "\n" + data )
timerLog.close()
except NameError, e:
main.log.exception(e)
def CASE14( self, main ):
"""
start election app on all onos nodes
"""
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
main.case("Start Leadership Election app")
main.step( "Install leadership election app" )
appResult = main.ONOScli1.activateApp( "org.onosproject.election" )
utilities.assert_equals(
expect=main.TRUE,
actual=appResult,
onpass="Election app installed",
onfail="Something went wrong with installing Leadership election" )
main.step( "Run for election on each node" )
leaderResult = main.ONOScli1.electionTestRun()
# check for leader
leader = main.ONOScli1.electionTestLeader()
# verify leader is ONOS1
if leader == main.nodes[0].ip_address:
# all is well
pass
elif leader is None:
# No leader elected
main.log.error( "No leader was elected" )
leaderResult = main.FALSE
elif leader == main.FALSE:
# error in response
# TODO: add check for "Command not found:" in the driver, this
# means the app isn't loaded
main.log.error( "Something is wrong with electionTestLeader" +
" function, check the error logs" )
leaderResult = main.FALSE
else:
# error in response
main.log.error(
"Unexpected response from electionTestLeader function:'" +
str( leader ) +
"'" )
leaderResult = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=leaderResult,
onpass="Successfully ran for leadership",
onfail="Failed to run for leadership" )
def CASE15( self, main ):
"""
Check that Leadership Election is still functional
"""
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
leaderResult = main.TRUE
description = "Check that Leadership Election is still functional"
main.case( description )
main.step( "Find current leader and withdraw" )
leader = main.ONOScli1.electionTestLeader()
# do some sanity checking on leader before using it
withdrawResult = main.FALSE
if leader == main.nodes[0].ip_address:
oldLeader = getattr( main, "ONOScli1" )
elif leader is None or leader == main.FALSE:
main.log.error(
"Leader for the election app should be an ONOS node," +
"instead got '" + str( leader ) + "'" )
leaderResult = main.FALSE
oldLeader = None
else:
main.log.error( "Leader election --- why am I HERE?!?")
leaderResult = main.FALSE
oldLeader = None
if oldLeader:
withdrawResult = oldLeader.electionTestWithdraw()
utilities.assert_equals(
expect=main.TRUE,
actual=withdrawResult,
onpass="Node was withdrawn from election",
onfail="Node was not withdrawn from election" )
main.step( "Make sure new leader is elected" )
leaderN = main.ONOScli1.electionTestLeader()
if leaderN == leader:
main.log.error( "ONOS still sees " + str( leaderN ) +
" as leader after they withdrew" )
leaderResult = main.FALSE
elif leaderN == main.FALSE:
# error in response
# TODO: add check for "Command not found:" in the driver, this
# means the app isn't loaded
main.log.error( "Something is wrong with electionTestLeader " +
"function, check the error logs" )
leaderResult = main.FALSE
elif leaderN is None:
main.log.info(
"There is no leader after the app withdrew from election" )
leaderResult = main.TRUE
utilities.assert_equals(
expect=main.TRUE,
actual=leaderResult,
onpass="Leadership election passed",
onfail="Something went wrong with Leadership election" )
main.step( "Run for election on old leader( just so everyone " +
"is in the hat )" )
if oldLeader:
runResult = oldLeader.electionTestRun()
else:
runResult = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=runResult,
onpass="App re-ran for election",
onfail="App failed to run for election" )
main.step( "Node became leader when it ran for election" )
afterRun = main.ONOScli1.electionTestLeader()
# verify leader is ONOS1
if afterRun == main.nodes[0].ip_address:
afterResult = main.TRUE
else:
afterResult = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=afterResult,
onpass="Old leader successfully re-ran for election",
onfail="Something went wrong with Leadership election after " +
"the old leader re-ran for election" )
def CASE16( self, main ):
"""
Install Distributed Primitives app
"""
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
assert main.CLIs, "main.CLIs not defined"
assert main.nodes, "main.nodes not defined"
# Variables for the distributed primitives tests
global pCounterName
global iCounterName
global pCounterValue
global iCounterValue
global onosSet
global onosSetName
pCounterName = "TestON-Partitions"
iCounterName = "TestON-inMemory"
pCounterValue = 0
iCounterValue = 0
onosSet = set([])
onosSetName = "TestON-set"
description = "Install Primitives app"
main.case( description )
main.step( "Install Primitives app" )
appName = "org.onosproject.distributedprimitives"
appResults = main.CLIs[0].activateApp( appName )
utilities.assert_equals( expect=main.TRUE,
actual=appResults,
onpass="Primitives app activated",
onfail="Primitives app not activated" )
def CASE17( self, main ):
"""
Check for basic functionality with distributed primitives
"""
# Make sure variables are defined/set
assert main.numCtrls, "main.numCtrls not defined"
assert main, "main not defined"
assert utilities.assert_equals, "utilities.assert_equals not defined"
assert main.CLIs, "main.CLIs not defined"
assert main.nodes, "main.nodes not defined"
assert pCounterName, "pCounterName not defined"
assert iCounterName, "iCounterName not defined"
assert onosSetName, "onosSetName not defined"
# NOTE: assert fails if value is 0/None/Empty/False
try:
pCounterValue
except NameError:
main.log.error( "pCounterValue not defined, setting to 0" )
pCounterValue = 0
try:
iCounterValue
except NameError:
main.log.error( "iCounterValue not defined, setting to 0" )
iCounterValue = 0
try:
onosSet
except NameError:
main.log.error( "onosSet not defined, setting to empty Set" )
onosSet = set([])
# Variables for the distributed primitives tests. These are local only
addValue = "a"
addAllValue = "a b c d e f"
retainValue = "c d e f"
description = "Check for basic functionality with distributed " +\
"primitives"
main.case( description )
main.caseExplanation = "Test the methods of the distributed " +\
"primitives (counters and sets) throught the cli"
# DISTRIBUTED ATOMIC COUNTERS
# Partitioned counters
main.step( "Increment then get a default counter on each node" )
pCounters = []
threads = []
addedPValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
name="counterAddAndGet-" + str( i ),
args=[ pCounterName ] )
pCounterValue += 1
addedPValues.append( pCounterValue )
threads.append( t )
t.start()
for t in threads:
t.join()
pCounters.append( t.result )
# Check that counter incremented numController times
pCounterResults = True
for i in addedPValues:
tmpResult = i in pCounters
pCounterResults = pCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in partitioned "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=pCounterResults,
onpass="Default counter incremented",
onfail="Error incrementing default" +
" counter" )
main.step( "Get then Increment a default counter on each node" )
pCounters = []
threads = []
addedPValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd,
name="counterGetAndAdd-" + str( i ),
args=[ pCounterName ] )
addedPValues.append( pCounterValue )
pCounterValue += 1
threads.append( t )
t.start()
for t in threads:
t.join()
pCounters.append( t.result )
# Check that counter incremented numController times
pCounterResults = True
for i in addedPValues:
tmpResult = i in pCounters
pCounterResults = pCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in partitioned "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=pCounterResults,
onpass="Default counter incremented",
onfail="Error incrementing default" +
" counter" )
main.step( "Counters we added have the correct values" )
incrementCheck = main.Counters.counterCheck( pCounterName, pCounterValue )
utilities.assert_equals( expect=main.TRUE,
actual=incrementCheck,
onpass="Added counters are correct",
onfail="Added counters are incorrect" )
main.step( "Add -8 to then get a default counter on each node" )
pCounters = []
threads = []
addedPValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
name="counterIncrement-" + str( i ),
args=[ pCounterName ],
kwargs={ "delta": -8 } )
pCounterValue += -8
addedPValues.append( pCounterValue )
threads.append( t )
t.start()
for t in threads:
t.join()
pCounters.append( t.result )
# Check that counter incremented numController times
pCounterResults = True
for i in addedPValues:
tmpResult = i in pCounters
pCounterResults = pCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in partitioned "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=pCounterResults,
onpass="Default counter incremented",
onfail="Error incrementing default" +
" counter" )
main.step( "Add 5 to then get a default counter on each node" )
pCounters = []
threads = []
addedPValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
name="counterIncrement-" + str( i ),
args=[ pCounterName ],
kwargs={ "delta": 5 } )
pCounterValue += 5
addedPValues.append( pCounterValue )
threads.append( t )
t.start()
for t in threads:
t.join()
pCounters.append( t.result )
# Check that counter incremented numController times
pCounterResults = True
for i in addedPValues:
tmpResult = i in pCounters
pCounterResults = pCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in partitioned "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=pCounterResults,
onpass="Default counter incremented",
onfail="Error incrementing default" +
" counter" )
main.step( "Get then add 5 to a default counter on each node" )
pCounters = []
threads = []
addedPValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd,
name="counterIncrement-" + str( i ),
args=[ pCounterName ],
kwargs={ "delta": 5 } )
addedPValues.append( pCounterValue )
pCounterValue += 5
threads.append( t )
t.start()
for t in threads:
t.join()
pCounters.append( t.result )
# Check that counter incremented numController times
pCounterResults = True
for i in addedPValues:
tmpResult = i in pCounters
pCounterResults = pCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in partitioned "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=pCounterResults,
onpass="Default counter incremented",
onfail="Error incrementing default" +
" counter" )
main.step( "Counters we added have the correct values" )
incrementCheck = main.Counters.counterCheck( pCounterName, pCounterValue )
utilities.assert_equals( expect=main.TRUE,
actual=incrementCheck,
onpass="Added counters are correct",
onfail="Added counters are incorrect" )
# In-Memory counters
main.step( "Increment and get an in-memory counter on each node" )
iCounters = []
addedIValues = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
name="icounterIncrement-" + str( i ),
args=[ iCounterName ],
kwargs={ "inMemory": True } )
iCounterValue += 1
addedIValues.append( iCounterValue )
threads.append( t )
t.start()
for t in threads:
t.join()
iCounters.append( t.result )
# Check that counter incremented numController times
iCounterResults = True
for i in addedIValues:
tmpResult = i in iCounters
iCounterResults = iCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in the in-memory "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=iCounterResults,
onpass="In-memory counter incremented",
onfail="Error incrementing in-memory" +
" counter" )
main.step( "Get then Increment a in-memory counter on each node" )
iCounters = []
threads = []
addedIValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd,
name="counterGetAndAdd-" + str( i ),
args=[ iCounterName ],
kwargs={ "inMemory": True } )
addedIValues.append( iCounterValue )
iCounterValue += 1
threads.append( t )
t.start()
for t in threads:
t.join()
iCounters.append( t.result )
# Check that counter incremented numController times
iCounterResults = True
for i in addedIValues:
tmpResult = i in iCounters
iCounterResults = iCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in in-memory "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=iCounterResults,
onpass="In-memory counter incremented",
onfail="Error incrementing in-memory" +
" counter" )
main.step( "Counters we added have the correct values" )
incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue )
utilities.assert_equals( expect=main.TRUE,
actual=incrementCheck,
onpass="Added counters are correct",
onfail="Added counters are incorrect" )
main.step( "Add -8 to then get a in-memory counter on each node" )
iCounters = []
threads = []
addedIValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
name="counterIncrement-" + str( i ),
args=[ iCounterName ],
kwargs={ "delta": -8, "inMemory": True } )
iCounterValue += -8
addedIValues.append( iCounterValue )
threads.append( t )
t.start()
for t in threads:
t.join()
iCounters.append( t.result )
# Check that counter incremented numController times
iCounterResults = True
for i in addedIValues:
tmpResult = i in iCounters
iCounterResults = iCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in in-memory "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=pCounterResults,
onpass="In-memory counter incremented",
onfail="Error incrementing in-memory" +
" counter" )
main.step( "Add 5 to then get a in-memory counter on each node" )
iCounters = []
threads = []
addedIValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
name="counterIncrement-" + str( i ),
args=[ iCounterName ],
kwargs={ "delta": 5, "inMemory": True } )
iCounterValue += 5
addedIValues.append( iCounterValue )
threads.append( t )
t.start()
for t in threads:
t.join()
iCounters.append( t.result )
# Check that counter incremented numController times
iCounterResults = True
for i in addedIValues:
tmpResult = i in iCounters
iCounterResults = iCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in in-memory "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=pCounterResults,
onpass="In-memory counter incremented",
onfail="Error incrementing in-memory" +
" counter" )
main.step( "Get then add 5 to a in-memory counter on each node" )
iCounters = []
threads = []
addedIValues = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd,
name="counterIncrement-" + str( i ),
args=[ iCounterName ],
kwargs={ "delta": 5, "inMemory": True } )
addedIValues.append( iCounterValue )
iCounterValue += 5
threads.append( t )
t.start()
for t in threads:
t.join()
iCounters.append( t.result )
# Check that counter incremented numController times
iCounterResults = True
for i in addedIValues:
tmpResult = i in iCounters
iCounterResults = iCounterResults and tmpResult
if not tmpResult:
main.log.error( str( i ) + " is not in in-memory "
"counter incremented results" )
utilities.assert_equals( expect=True,
actual=iCounterResults,
onpass="In-memory counter incremented",
onfail="Error incrementing in-memory" +
" counter" )
main.step( "Counters we added have the correct values" )
incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue )
utilities.assert_equals( expect=main.TRUE,
actual=incrementCheck,
onpass="Added counters are correct",
onfail="Added counters are incorrect" )
main.step( "Check counters are consistant across nodes" )
onosCounters = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].counters,
name="counters-" + str( i ) )
threads.append( t )
t.start()
for t in threads:
t.join()
onosCounters.append( t.result )
tmp = [ i == onosCounters[ 0 ] for i in onosCounters ]
if all( tmp ):
main.log.info( "Counters are consistent across all nodes" )
consistentCounterResults = main.TRUE
else:
main.log.error( "Counters are not consistent across all nodes" )
consistentCounterResults = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=consistentCounterResults,
onpass="ONOS counters are consistent " +
"across nodes",
onfail="ONOS Counters are inconsistent " +
"across nodes" )
main.step( "Counters we added have the correct values" )
incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue )
incrementCheck = incrementCheck and \
main.Counters.counterCheck( iCounterName, iCounterValue )
utilities.assert_equals( expect=main.TRUE,
actual=incrementCheck,
onpass="Added counters are correct",
onfail="Added counters are incorrect" )
# DISTRIBUTED SETS
main.step( "Distributed Set get" )
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=getResults,
onpass="Set elements are correct",
onfail="Set elements are incorrect" )
main.step( "Distributed Set size" )
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
utilities.assert_equals( expect=main.TRUE,
actual=sizeResults,
onpass="Set sizes are correct",
onfail="Set sizes are incorrect" )
main.step( "Distributed Set add()" )
onosSet.add( addValue )
addResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestAdd,
name="setTestAdd-" + str( i ),
args=[ onosSetName, addValue ] )
threads.append( t )
t.start()
for t in threads:
t.join()
addResponses.append( t.result )
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
addResults = main.TRUE
for i in range( main.numCtrls ):
if addResponses[ i ] == main.TRUE:
# All is well
pass
elif addResponses[ i ] == main.FALSE:
# Already in set, probably fine
pass
elif addResponses[ i ] == main.ERROR:
# Error in execution
addResults = main.FALSE
else:
# unexpected result
addResults = main.FALSE
if addResults != main.TRUE:
main.log.error( "Error executing set add" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
addResults = addResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=addResults,
onpass="Set add correct",
onfail="Set add was incorrect" )
main.step( "Distributed Set addAll()" )
onosSet.update( addAllValue.split() )
addResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestAdd,
name="setTestAddAll-" + str( i ),
args=[ onosSetName, addAllValue ] )
threads.append( t )
t.start()
for t in threads:
t.join()
addResponses.append( t.result )
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
addAllResults = main.TRUE
for i in range( main.numCtrls ):
if addResponses[ i ] == main.TRUE:
# All is well
pass
elif addResponses[ i ] == main.FALSE:
# Already in set, probably fine
pass
elif addResponses[ i ] == main.ERROR:
# Error in execution
addAllResults = main.FALSE
else:
# unexpected result
addAllResults = main.FALSE
if addAllResults != main.TRUE:
main.log.error( "Error executing set addAll" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
addAllResults = addAllResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=addAllResults,
onpass="Set addAll correct",
onfail="Set addAll was incorrect" )
main.step( "Distributed Set contains()" )
containsResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setContains-" + str( i ),
args=[ onosSetName ],
kwargs={ "values": addValue } )
threads.append( t )
t.start()
for t in threads:
t.join()
# NOTE: This is the tuple
containsResponses.append( t.result )
containsResults = main.TRUE
for i in range( main.numCtrls ):
if containsResponses[ i ] == main.ERROR:
containsResults = main.FALSE
else:
containsResults = containsResults and\
containsResponses[ i ][ 1 ]
utilities.assert_equals( expect=main.TRUE,
actual=containsResults,
onpass="Set contains is functional",
onfail="Set contains failed" )
main.step( "Distributed Set containsAll()" )
containsAllResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setContainsAll-" + str( i ),
args=[ onosSetName ],
kwargs={ "values": addAllValue } )
threads.append( t )
t.start()
for t in threads:
t.join()
# NOTE: This is the tuple
containsAllResponses.append( t.result )
containsAllResults = main.TRUE
for i in range( main.numCtrls ):
if containsResponses[ i ] == main.ERROR:
containsResults = main.FALSE
else:
containsResults = containsResults and\
containsResponses[ i ][ 1 ]
utilities.assert_equals( expect=main.TRUE,
actual=containsAllResults,
onpass="Set containsAll is functional",
onfail="Set containsAll failed" )
main.step( "Distributed Set remove()" )
onosSet.remove( addValue )
removeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestRemove,
name="setTestRemove-" + str( i ),
args=[ onosSetName, addValue ] )
threads.append( t )
t.start()
for t in threads:
t.join()
removeResponses.append( t.result )
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
removeResults = main.TRUE
for i in range( main.numCtrls ):
if removeResponses[ i ] == main.TRUE:
# All is well
pass
elif removeResponses[ i ] == main.FALSE:
# not in set, probably fine
pass
elif removeResponses[ i ] == main.ERROR:
# Error in execution
removeResults = main.FALSE
else:
# unexpected result
removeResults = main.FALSE
if removeResults != main.TRUE:
main.log.error( "Error executing set remove" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
removeResults = removeResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=removeResults,
onpass="Set remove correct",
onfail="Set remove was incorrect" )
main.step( "Distributed Set removeAll()" )
onosSet.difference_update( addAllValue.split() )
removeAllResponses = []
threads = []
try:
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestRemove,
name="setTestRemoveAll-" + str( i ),
args=[ onosSetName, addAllValue ] )
threads.append( t )
t.start()
for t in threads:
t.join()
removeAllResponses.append( t.result )
except Exception, e:
main.log.exception(e)
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
removeAllResults = main.TRUE
for i in range( main.numCtrls ):
if removeAllResponses[ i ] == main.TRUE:
# All is well
pass
elif removeAllResponses[ i ] == main.FALSE:
# not in set, probably fine
pass
elif removeAllResponses[ i ] == main.ERROR:
# Error in execution
removeAllResults = main.FALSE
else:
# unexpected result
removeAllResults = main.FALSE
if removeAllResults != main.TRUE:
main.log.error( "Error executing set removeAll" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
removeAllResults = removeAllResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=removeAllResults,
onpass="Set removeAll correct",
onfail="Set removeAll was incorrect" )
main.step( "Distributed Set addAll()" )
onosSet.update( addAllValue.split() )
addResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestAdd,
name="setTestAddAll-" + str( i ),
args=[ onosSetName, addAllValue ] )
threads.append( t )
t.start()
for t in threads:
t.join()
addResponses.append( t.result )
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
addAllResults = main.TRUE
for i in range( main.numCtrls ):
if addResponses[ i ] == main.TRUE:
# All is well
pass
elif addResponses[ i ] == main.FALSE:
# Already in set, probably fine
pass
elif addResponses[ i ] == main.ERROR:
# Error in execution
addAllResults = main.FALSE
else:
# unexpected result
addAllResults = main.FALSE
if addAllResults != main.TRUE:
main.log.error( "Error executing set addAll" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
addAllResults = addAllResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=addAllResults,
onpass="Set addAll correct",
onfail="Set addAll was incorrect" )
main.step( "Distributed Set clear()" )
onosSet.clear()
clearResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestRemove,
name="setTestClear-" + str( i ),
args=[ onosSetName, " "], # Values doesn't matter
kwargs={ "clear": True } )
threads.append( t )
t.start()
for t in threads:
t.join()
clearResponses.append( t.result )
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
clearResults = main.TRUE
for i in range( main.numCtrls ):
if clearResponses[ i ] == main.TRUE:
# All is well
pass
elif clearResponses[ i ] == main.FALSE:
# Nothing set, probably fine
pass
elif clearResponses[ i ] == main.ERROR:
# Error in execution
clearResults = main.FALSE
else:
# unexpected result
clearResults = main.FALSE
if clearResults != main.TRUE:
main.log.error( "Error executing set clear" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
clearResults = clearResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=clearResults,
onpass="Set clear correct",
onfail="Set clear was incorrect" )
main.step( "Distributed Set addAll()" )
onosSet.update( addAllValue.split() )
addResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestAdd,
name="setTestAddAll-" + str( i ),
args=[ onosSetName, addAllValue ] )
threads.append( t )
t.start()
for t in threads:
t.join()
addResponses.append( t.result )
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
addAllResults = main.TRUE
for i in range( main.numCtrls ):
if addResponses[ i ] == main.TRUE:
# All is well
pass
elif addResponses[ i ] == main.FALSE:
# Already in set, probably fine
pass
elif addResponses[ i ] == main.ERROR:
# Error in execution
addAllResults = main.FALSE
else:
# unexpected result
addAllResults = main.FALSE
if addAllResults != main.TRUE:
main.log.error( "Error executing set addAll" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " + str( size ) +
" for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
addAllResults = addAllResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=addAllResults,
onpass="Set addAll correct",
onfail="Set addAll was incorrect" )
main.step( "Distributed Set retain()" )
onosSet.intersection_update( retainValue.split() )
retainResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestRemove,
name="setTestRetain-" + str( i ),
args=[ onosSetName, retainValue ],
kwargs={ "retain": True } )
threads.append( t )
t.start()
for t in threads:
t.join()
retainResponses.append( t.result )
# main.TRUE = successfully changed the set
# main.FALSE = action resulted in no change in set
# main.ERROR - Some error in executing the function
retainResults = main.TRUE
for i in range( main.numCtrls ):
if retainResponses[ i ] == main.TRUE:
# All is well
pass
elif retainResponses[ i ] == main.FALSE:
# Already in set, probably fine
pass
elif retainResponses[ i ] == main.ERROR:
# Error in execution
retainResults = main.FALSE
else:
# unexpected result
retainResults = main.FALSE
if retainResults != main.TRUE:
main.log.error( "Error executing set retain" )
# Check if set is still correct
size = len( onosSet )
getResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestGet,
name="setTestGet-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
getResponses.append( t.result )
getResults = main.TRUE
for i in range( main.numCtrls ):
if isinstance( getResponses[ i ], list):
current = set( getResponses[ i ] )
if len( current ) == len( getResponses[ i ] ):
# no repeats
if onosSet != current:
main.log.error( "ONOS" + str( i + 1 ) +
" has incorrect view" +
" of set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
main.log.debug( "Expected: " + str( onosSet ) )
main.log.debug( "Actual: " + str( current ) )
getResults = main.FALSE
else:
# error, set is not a set
main.log.error( "ONOS" + str( i + 1 ) +
" has repeat elements in" +
" set " + onosSetName + ":\n" +
str( getResponses[ i ] ) )
getResults = main.FALSE
elif getResponses[ i ] == main.ERROR:
getResults = main.FALSE
sizeResponses = []
threads = []
for i in range( main.numCtrls ):
t = main.Thread( target=main.CLIs[i].setTestSize,
name="setTestSize-" + str( i ),
args=[ onosSetName ] )
threads.append( t )
t.start()
for t in threads:
t.join()
sizeResponses.append( t.result )
sizeResults = main.TRUE
for i in range( main.numCtrls ):
if size != sizeResponses[ i ]:
sizeResults = main.FALSE
main.log.error( "ONOS" + str( i + 1 ) +
" expected a size of " +
str( size ) + " for set " + onosSetName +
" but got " + str( sizeResponses[ i ] ) )
retainResults = retainResults and getResults and sizeResults
utilities.assert_equals( expect=main.TRUE,
actual=retainResults,
onpass="Set retain correct",
onfail="Set retain was incorrect" )