| """ |
| Description: This test is to determine if the HA test setup is |
| working correctly. There are no failures so this test should |
| have a 100% pass rate |
| |
| List of test cases: |
| CASE1: Compile ONOS and push it to the test machines |
| CASE2: Assign devices to controllers |
| CASE21: Assign mastership to controllers |
| CASE3: Assign intents |
| CASE4: Ping across added host intents |
| CASE5: Reading state of ONOS |
| CASE6: The Failure case. Since this is the Sanity test, we do nothing. |
| CASE7: Check state after control plane failure |
| CASE8: Compare topo |
| CASE9: Link s3-s28 down |
| CASE10: Link s3-s28 up |
| CASE11: Switch down |
| CASE12: Switch up |
| CASE13: Clean up |
| CASE14: start election app on all onos nodes |
| CASE15: Check that Leadership Election is still functional |
| CASE16: Install Distributed Primitives app |
| CASE17: Check for basic functionality with distributed primitives |
| """ |
| |
| |
| class HAsanity: |
| |
| def __init__( self ): |
| self.default = '' |
| |
| def CASE1( self, main ): |
| """ |
| CASE1 is to compile ONOS and push it to the test machines |
| |
| Startup sequence: |
| cell <name> |
| onos-verify-cell |
| NOTE: temporary - onos-remove-raft-logs |
| onos-uninstall |
| start mininet |
| git pull |
| mvn clean install |
| onos-package |
| onos-install -f |
| onos-wait-for-start |
| start cli sessions |
| start tcpdump |
| """ |
| import imp |
| import time |
| main.log.info( "ONOS HA Sanity test - initialization" ) |
| main.case( "Setting up test environment" ) |
| main.caseExplanation = "Setup the test environment including " +\ |
| "installing ONOS, starting Mininet and ONOS" +\ |
| "cli sessions." |
| # TODO: save all the timers and output them for plotting |
| |
| # load some variables from the params file |
| PULLCODE = False |
| if main.params[ 'Git' ] == 'True': |
| PULLCODE = True |
| gitBranch = main.params[ 'branch' ] |
| cellName = main.params[ 'ENV' ][ 'cellName' ] |
| |
| main.numCtrls = int( main.params[ 'num_controllers' ] ) |
| if main.ONOSbench.maxNodes: |
| if main.ONOSbench.maxNodes < main.numCtrls: |
| main.numCtrls = int( main.ONOSbench.maxNodes ) |
| # TODO: refactor how to get onos port, maybe put into component tag? |
| # set global variables |
| global ONOS1Port |
| global ONOS2Port |
| global ONOS3Port |
| global ONOS4Port |
| global ONOS5Port |
| global ONOS6Port |
| global ONOS7Port |
| |
| # FIXME: just get controller port from params? |
| # TODO: do we really need all these? |
| ONOS1Port = main.params[ 'CTRL' ][ 'port1' ] |
| ONOS2Port = main.params[ 'CTRL' ][ 'port2' ] |
| ONOS3Port = main.params[ 'CTRL' ][ 'port3' ] |
| ONOS4Port = main.params[ 'CTRL' ][ 'port4' ] |
| ONOS5Port = main.params[ 'CTRL' ][ 'port5' ] |
| ONOS6Port = main.params[ 'CTRL' ][ 'port6' ] |
| ONOS7Port = main.params[ 'CTRL' ][ 'port7' ] |
| |
| try: |
| fileName = "Counters" |
| path = main.params[ 'imports' ][ 'path' ] |
| main.Counters = imp.load_source( fileName, |
| path + fileName + ".py" ) |
| except Exception as e: |
| main.log.exception( e ) |
| main.cleanup() |
| main.exit() |
| |
| main.CLIs = [] |
| main.nodes = [] |
| ipList = [] |
| for i in range( 1, main.numCtrls + 1 ): |
| try: |
| main.CLIs.append( getattr( main, 'ONOScli' + str( i ) ) ) |
| main.nodes.append( getattr( main, 'ONOS' + str( i ) ) ) |
| ipList.append( main.nodes[ -1 ].ip_address ) |
| except AttributeError: |
| break |
| |
| main.step( "Create cell file" ) |
| cellAppString = main.params[ 'ENV' ][ 'appString' ] |
| main.ONOSbench.createCellFile( main.ONOSbench.ip_address, cellName, |
| main.Mininet1.ip_address, |
| cellAppString, ipList ) |
| main.step( "Applying cell variable to environment" ) |
| cellResult = main.ONOSbench.setCell( cellName ) |
| verifyResult = main.ONOSbench.verifyCell() |
| |
| # FIXME:this is short term fix |
| main.log.info( "Removing raft logs" ) |
| main.ONOSbench.onosRemoveRaftLogs() |
| |
| main.log.info( "Uninstalling ONOS" ) |
| for node in main.nodes: |
| main.ONOSbench.onosUninstall( node.ip_address ) |
| |
| # Make sure ONOS is DEAD |
| main.log.info( "Killing any ONOS processes" ) |
| killResults = main.TRUE |
| for node in main.nodes: |
| killed = main.ONOSbench.onosKill( node.ip_address ) |
| killResults = killResults and killed |
| |
| cleanInstallResult = main.TRUE |
| gitPullResult = main.TRUE |
| |
| main.step( "Starting Mininet" ) |
| # scp topo file to mininet |
| # TODO: move to params? |
| topoName = "obelisk.py" |
| filePath = main.ONOSbench.home + "/tools/test/topos/" |
| main.ONOSbench.scp( main.Mininet1, |
| filePath + topoName, |
| main.Mininet1.home, |
| direction="to" ) |
| mnResult = main.Mininet1.startNet( ) |
| utilities.assert_equals( expect=main.TRUE, actual=mnResult, |
| onpass="Mininet Started", |
| onfail="Error starting Mininet" ) |
| |
| main.step( "Git checkout and pull " + gitBranch ) |
| if PULLCODE: |
| main.ONOSbench.gitCheckout( gitBranch ) |
| gitPullResult = main.ONOSbench.gitPull() |
| # values of 1 or 3 are good |
| utilities.assert_lesser( expect=0, actual=gitPullResult, |
| onpass="Git pull successful", |
| onfail="Git pull failed" ) |
| main.ONOSbench.getVersion( report=True ) |
| |
| main.step( "Using mvn clean install" ) |
| cleanInstallResult = main.TRUE |
| if PULLCODE and gitPullResult == main.TRUE: |
| cleanInstallResult = main.ONOSbench.cleanInstall() |
| else: |
| main.log.warn( "Did not pull new code so skipping mvn " + |
| "clean install" ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=cleanInstallResult, |
| onpass="MCI successful", |
| onfail="MCI failed" ) |
| # GRAPHS |
| # NOTE: important params here: |
| # job = name of Jenkins job |
| # Plot Name = Plot-HA, only can be used if multiple plots |
| # index = The number of the graph under plot name |
| job = "HAsanity" |
| plotName = "Plot-HA" |
| index = "1" |
| graphs = '<ac:structured-macro ac:name="html">\n' |
| graphs += '<ac:plain-text-body><![CDATA[\n' |
| graphs += '<iframe src="https://onos-jenkins.onlab.us/job/' + job +\ |
| '/plot/' + plotName + '/getPlot?index=' + index +\ |
| '&width=500&height=300"' +\ |
| 'noborder="0" width="500" height="300" scrolling="yes" ' +\ |
| 'seamless="seamless"></iframe>\n' |
| graphs += ']]></ac:plain-text-body>\n' |
| graphs += '</ac:structured-macro>\n' |
| main.log.wiki(graphs) |
| |
| main.step( "Creating ONOS package" ) |
| packageResult = main.ONOSbench.onosPackage() |
| utilities.assert_equals( expect=main.TRUE, actual=packageResult, |
| onpass="ONOS package successful", |
| onfail="ONOS package failed" ) |
| |
| main.step( "Installing ONOS package" ) |
| onosInstallResult = main.TRUE |
| for node in main.nodes: |
| tmpResult = main.ONOSbench.onosInstall( options="-f", |
| node=node.ip_address ) |
| onosInstallResult = onosInstallResult and tmpResult |
| utilities.assert_equals( expect=main.TRUE, actual=onosInstallResult, |
| onpass="ONOS install successful", |
| onfail="ONOS install failed" ) |
| |
| main.step( "Checking if ONOS is up yet" ) |
| for i in range( 2 ): |
| onosIsupResult = main.TRUE |
| for node in main.nodes: |
| started = main.ONOSbench.isup( node.ip_address ) |
| if not started: |
| main.log.error( node.name + " didn't start!" ) |
| main.ONOSbench.onosStop( node.ip_address ) |
| main.ONOSbench.onosStart( node.ip_address ) |
| onosIsupResult = onosIsupResult and started |
| if onosIsupResult == main.TRUE: |
| break |
| utilities.assert_equals( expect=main.TRUE, actual=onosIsupResult, |
| onpass="ONOS startup successful", |
| onfail="ONOS startup failed" ) |
| |
| main.log.step( "Starting ONOS CLI sessions" ) |
| cliResults = main.TRUE |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].startOnosCli, |
| name="startOnosCli-" + str( i ), |
| args=[main.nodes[i].ip_address] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| cliResults = cliResults and t.result |
| utilities.assert_equals( expect=main.TRUE, actual=cliResults, |
| onpass="ONOS cli startup successful", |
| onfail="ONOS cli startup failed" ) |
| |
| if main.params[ 'tcpdump' ].lower() == "true": |
| main.step( "Start Packet Capture MN" ) |
| main.Mininet2.startTcpdump( |
| str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST ) |
| + "-MN.pcap", |
| intf=main.params[ 'MNtcpdump' ][ 'intf' ], |
| port=main.params[ 'MNtcpdump' ][ 'port' ] ) |
| |
| main.step( "App Ids check" ) |
| time.sleep(60) |
| appCheck = main.TRUE |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].appToIDCheck, |
| name="appToIDCheck-" + str( i ), |
| args=[] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| appCheck = appCheck and t.result |
| if appCheck != main.TRUE: |
| main.log.warn( main.CLIs[0].apps() ) |
| main.log.warn( main.CLIs[0].appIDs() ) |
| utilities.assert_equals( expect=main.TRUE, actual=appCheck, |
| onpass="App Ids seem to be correct", |
| onfail="Something is wrong with app Ids" ) |
| |
| if cliResults == main.FALSE: |
| main.log.error( "Failed to start ONOS, stopping test" ) |
| main.cleanup() |
| main.exit() |
| |
| def CASE2( self, main ): |
| """ |
| Assign devices to controllers |
| """ |
| import re |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| assert ONOS1Port, "ONOS1Port not defined" |
| assert ONOS2Port, "ONOS2Port not defined" |
| assert ONOS3Port, "ONOS3Port not defined" |
| assert ONOS4Port, "ONOS4Port not defined" |
| assert ONOS5Port, "ONOS5Port not defined" |
| assert ONOS6Port, "ONOS6Port not defined" |
| assert ONOS7Port, "ONOS7Port not defined" |
| |
| main.case( "Assigning devices to controllers" ) |
| main.caseExplanation = "Assign switches to ONOS using 'ovs-vsctl' " +\ |
| "and check that an ONOS node becomes the " +\ |
| "master of the device." |
| main.step( "Assign switches to controllers" ) |
| |
| ipList = [] |
| for i in range( main.numCtrls ): |
| ipList.append( main.nodes[ i ].ip_address ) |
| swList = [] |
| for i in range( 1, 29 ): |
| swList.append( "s" + str( i ) ) |
| main.Mininet1.assignSwController( sw=swList, ip=ipList ) |
| |
| mastershipCheck = main.TRUE |
| for i in range( 1, 29 ): |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| try: |
| main.log.info( str( response ) ) |
| except Exception: |
| main.log.info( repr( response ) ) |
| for node in main.nodes: |
| if re.search( "tcp:" + node.ip_address, response ): |
| mastershipCheck = mastershipCheck and main.TRUE |
| else: |
| main.log.error( "Error, node " + node.ip_address + " is " + |
| "not in the list of controllers s" + |
| str( i ) + " is connecting to." ) |
| mastershipCheck = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=mastershipCheck, |
| onpass="Switch mastership assigned correctly", |
| onfail="Switches not assigned correctly to controllers" ) |
| |
| def CASE21( self, main ): |
| """ |
| Assign mastership to controllers |
| """ |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| assert ONOS1Port, "ONOS1Port not defined" |
| assert ONOS2Port, "ONOS2Port not defined" |
| assert ONOS3Port, "ONOS3Port not defined" |
| assert ONOS4Port, "ONOS4Port not defined" |
| assert ONOS5Port, "ONOS5Port not defined" |
| assert ONOS6Port, "ONOS6Port not defined" |
| assert ONOS7Port, "ONOS7Port not defined" |
| |
| main.case( "Assigning Controller roles for switches" ) |
| main.caseExplanation = "Check that ONOS is connected to each " +\ |
| "device. Then manually assign" +\ |
| " mastership to specific ONOS nodes using" +\ |
| " 'device-role'" |
| main.step( "Assign mastership of switches to specific controllers" ) |
| # Manually assign mastership to the controller we want |
| roleCall = main.TRUE |
| |
| ipList = [ ] |
| deviceList = [] |
| try: |
| # Assign mastership to specific controllers. This assignment was |
| # determined for a 7 node cluser, but will work with any sized |
| # cluster |
| for i in range( 1, 29 ): # switches 1 through 28 |
| # set up correct variables: |
| if i == 1: |
| c = 0 |
| ip = main.nodes[ c ].ip_address # ONOS1 |
| deviceId = main.ONOScli1.getDevice( "1000" ).get( 'id' ) |
| elif i == 2: |
| c = 1 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS2 |
| deviceId = main.ONOScli1.getDevice( "2000" ).get( 'id' ) |
| elif i == 3: |
| c = 1 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS2 |
| deviceId = main.ONOScli1.getDevice( "3000" ).get( 'id' ) |
| elif i == 4: |
| c = 3 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS4 |
| deviceId = main.ONOScli1.getDevice( "3004" ).get( 'id' ) |
| elif i == 5: |
| c = 2 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS3 |
| deviceId = main.ONOScli1.getDevice( "5000" ).get( 'id' ) |
| elif i == 6: |
| c = 2 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS3 |
| deviceId = main.ONOScli1.getDevice( "6000" ).get( 'id' ) |
| elif i == 7: |
| c = 5 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS6 |
| deviceId = main.ONOScli1.getDevice( "6007" ).get( 'id' ) |
| elif i >= 8 and i <= 17: |
| c = 4 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS5 |
| dpid = '3' + str( i ).zfill( 3 ) |
| deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' ) |
| elif i >= 18 and i <= 27: |
| c = 6 % main.numCtrls |
| ip = main.nodes[ c ].ip_address # ONOS7 |
| dpid = '6' + str( i ).zfill( 3 ) |
| deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' ) |
| elif i == 28: |
| c = 0 |
| ip = main.nodes[ c ].ip_address # ONOS1 |
| deviceId = main.ONOScli1.getDevice( "2800" ).get( 'id' ) |
| else: |
| main.log.error( "You didn't write an else statement for " + |
| "switch s" + str( i ) ) |
| roleCall = main.FALSE |
| # Assign switch |
| assert deviceId, "No device id for s" + str( i ) + " in ONOS" |
| # TODO: make this controller dynamic |
| roleCall = roleCall and main.ONOScli1.deviceRole( deviceId, |
| ip ) |
| ipList.append( ip ) |
| deviceList.append( deviceId ) |
| except ( AttributeError, AssertionError ): |
| main.log.exception( "Something is wrong with ONOS device view" ) |
| main.log.info( main.ONOScli1.devices() ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=roleCall, |
| onpass="Re-assigned switch mastership to designated controller", |
| onfail="Something wrong with deviceRole calls" ) |
| |
| main.step( "Check mastership was correctly assigned" ) |
| roleCheck = main.TRUE |
| # NOTE: This is due to the fact that device mastership change is not |
| # atomic and is actually a multi step process |
| time.sleep( 5 ) |
| for i in range( len( ipList ) ): |
| ip = ipList[i] |
| deviceId = deviceList[i] |
| # Check assignment |
| master = main.ONOScli1.getRole( deviceId ).get( 'master' ) |
| if ip in master: |
| roleCheck = roleCheck and main.TRUE |
| else: |
| roleCheck = roleCheck and main.FALSE |
| main.log.error( "Error, controller " + ip + " is not" + |
| " master " + "of device " + |
| str( deviceId ) + ". Master is " + |
| repr( master ) + "." ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=roleCheck, |
| onpass="Switches were successfully reassigned to designated " + |
| "controller", |
| onfail="Switches were not successfully reassigned" ) |
| |
| def CASE3( self, main ): |
| """ |
| Assign intents |
| """ |
| import time |
| import json |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| main.case( "Adding host Intents" ) |
| main.caseExplanation = "Discover hosts by using pingall then " +\ |
| "assign predetermined host-to-host intents." +\ |
| " After installation, check that the intent" +\ |
| " is distributed to all nodes and the state" +\ |
| " is INSTALLED" |
| |
| # install onos-app-fwd |
| main.step( "Install reactive forwarding app" ) |
| installResults = main.CLIs[0].activateApp( "org.onosproject.fwd" ) |
| utilities.assert_equals( expect=main.TRUE, actual=installResults, |
| onpass="Install fwd successful", |
| onfail="Install fwd failed" ) |
| |
| main.step( "Check app ids" ) |
| appCheck = main.TRUE |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].appToIDCheck, |
| name="appToIDCheck-" + str( i ), |
| args=[] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| appCheck = appCheck and t.result |
| if appCheck != main.TRUE: |
| main.log.warn( main.CLIs[0].apps() ) |
| main.log.warn( main.CLIs[0].appIDs() ) |
| utilities.assert_equals( expect=main.TRUE, actual=appCheck, |
| onpass="App Ids seem to be correct", |
| onfail="Something is wrong with app Ids" ) |
| |
| main.step( "Discovering Hosts( Via pingall for now )" ) |
| # FIXME: Once we have a host discovery mechanism, use that instead |
| # REACTIVE FWD test |
| pingResult = main.FALSE |
| passMsg = "Reactive Pingall test passed" |
| time1 = time.time() |
| pingResult = main.Mininet1.pingall() |
| time2 = time.time() |
| if not pingResult: |
| main.log.warn("First pingall failed. Trying again...") |
| pingResult = main.Mininet1.pingall() |
| passMsg += " on the second try" |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=pingResult, |
| onpass= passMsg, |
| onfail="Reactive Pingall failed, " + |
| "one or more ping pairs failed" ) |
| main.log.info( "Time for pingall: %2f seconds" % |
| ( time2 - time1 ) ) |
| # timeout for fwd flows |
| time.sleep( 11 ) |
| # uninstall onos-app-fwd |
| main.step( "Uninstall reactive forwarding app" ) |
| uninstallResult = main.CLIs[0].deactivateApp( "org.onosproject.fwd" ) |
| utilities.assert_equals( expect=main.TRUE, actual=uninstallResult, |
| onpass="Uninstall fwd successful", |
| onfail="Uninstall fwd failed" ) |
| |
| main.step( "Check app ids" ) |
| threads = [] |
| appCheck2 = main.TRUE |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].appToIDCheck, |
| name="appToIDCheck-" + str( i ), |
| args=[] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| appCheck2 = appCheck2 and t.result |
| if appCheck2 != main.TRUE: |
| main.log.warn( main.CLIs[0].apps() ) |
| main.log.warn( main.CLIs[0].appIDs() ) |
| utilities.assert_equals( expect=main.TRUE, actual=appCheck2, |
| onpass="App Ids seem to be correct", |
| onfail="Something is wrong with app Ids" ) |
| |
| main.step( "Add host intents via cli" ) |
| intentIds = [] |
| # TODO: move the host numbers to params |
| # Maybe look at all the paths we ping? |
| intentAddResult = True |
| hostResult = main.TRUE |
| for i in range( 8, 18 ): |
| main.log.info( "Adding host intent between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| host1 = "00:00:00:00:00:" + \ |
| str( hex( i )[ 2: ] ).zfill( 2 ).upper() |
| host2 = "00:00:00:00:00:" + \ |
| str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper() |
| # NOTE: getHost can return None |
| host1Dict = main.ONOScli1.getHost( host1 ) |
| host2Dict = main.ONOScli1.getHost( host2 ) |
| host1Id = None |
| host2Id = None |
| if host1Dict and host2Dict: |
| host1Id = host1Dict.get( 'id', None ) |
| host2Id = host2Dict.get( 'id', None ) |
| if host1Id and host2Id: |
| nodeNum = ( i % main.numCtrls ) |
| tmpId = main.CLIs[ nodeNum ].addHostIntent( host1Id, host2Id ) |
| if tmpId: |
| main.log.info( "Added intent with id: " + tmpId ) |
| intentIds.append( tmpId ) |
| else: |
| main.log.error( "addHostIntent returned: " + |
| repr( tmpId ) ) |
| else: |
| main.log.error( "Error, getHost() failed for h" + str( i ) + |
| " and/or h" + str( i + 10 ) ) |
| hosts = main.CLIs[ 0 ].hosts() |
| main.log.warn( "Hosts output: " ) |
| try: |
| main.log.warn( json.dumps( json.loads( hosts ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( repr( hosts ) ) |
| hostResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, actual=hostResult, |
| onpass="Found a host id for each host", |
| onfail="Error looking up host ids" ) |
| |
| intentStart = time.time() |
| onosIds = main.ONOScli1.getAllIntentsId() |
| main.log.info( "Submitted intents: " + str( intentIds ) ) |
| main.log.info( "Intents in ONOS: " + str( onosIds ) ) |
| for intent in intentIds: |
| if intent in onosIds: |
| pass # intent submitted is in onos |
| else: |
| intentAddResult = False |
| if intentAddResult: |
| intentStop = time.time() |
| else: |
| intentStop = None |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| installedCheck = True |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| try: |
| for intent in json.loads( intents ): |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents" ) |
| # add submitted intents not in the store |
| tmplist = [ i for i, s in intentStates ] |
| missingIntents = False |
| for i in intentIds: |
| if i not in tmplist: |
| intentStates.append( ( i, " - " ) ) |
| missingIntents = True |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| leaders = main.ONOScli1.leaders() |
| try: |
| missing = False |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| missing = True |
| else: |
| main.log.error( "leaders() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| # Check all nodes |
| if missing: |
| for node in main.CLIs: |
| response = node.leaders( jsonFormat=False) |
| main.log.warn( str( node.name ) + " leaders output: \n" + |
| str( response ) ) |
| |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| |
| intentAddResult = bool( intentAddResult and not missingIntents and |
| installedCheck ) |
| if not intentAddResult: |
| main.log.error( "Error in pushing host intents to ONOS" ) |
| |
| main.step( "Intent Anti-Entropy dispersion" ) |
| for i in range(100): |
| correct = True |
| main.log.info( "Submitted intents: " + str( sorted( intentIds ) ) ) |
| for cli in main.CLIs: |
| onosIds = [] |
| ids = cli.getAllIntentsId() |
| onosIds.append( ids ) |
| main.log.debug( "Intents in " + cli.name + ": " + |
| str( sorted( onosIds ) ) ) |
| if sorted( ids ) != sorted( intentIds ): |
| main.log.warn( "Set of intent IDs doesn't match" ) |
| correct = False |
| break |
| else: |
| intents = json.loads( cli.intents() ) |
| for intent in intents: |
| if intent[ 'state' ] != "INSTALLED": |
| main.log.warn( "Intent " + intent[ 'id' ] + |
| " is " + intent[ 'state' ] ) |
| correct = False |
| break |
| if correct: |
| break |
| else: |
| time.sleep(1) |
| if not intentStop: |
| intentStop = time.time() |
| global gossipTime |
| gossipTime = intentStop - intentStart |
| main.log.info( "It took about " + str( gossipTime ) + |
| " seconds for all intents to appear in each node" ) |
| gossipPeriod = int( main.params['timers']['gossip'] ) |
| maxGossipTime = gossipPeriod * len( main.nodes ) |
| utilities.assert_greater_equals( |
| expect=maxGossipTime, actual=gossipTime, |
| onpass="ECM anti-entropy for intents worked within " + |
| "expected time", |
| onfail="Intent ECM anti-entropy took too long. " + |
| "Expected time:{}, Actual time:{}".format( maxGossipTime, |
| gossipTime ) ) |
| if gossipTime <= maxGossipTime: |
| intentAddResult = True |
| |
| if not intentAddResult or "key" in pendingMap: |
| import time |
| installedCheck = True |
| main.log.info( "Sleeping 60 seconds to see if intents are found" ) |
| time.sleep( 60 ) |
| onosIds = main.ONOScli1.getAllIntentsId() |
| main.log.info( "Submitted intents: " + str( intentIds ) ) |
| main.log.info( "Intents in ONOS: " + str( onosIds ) ) |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| try: |
| for intent in json.loads( intents ): |
| # Iter through intents of a node |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents" ) |
| # add submitted intents not in the store |
| tmplist = [ i for i, s in intentStates ] |
| for i in intentIds: |
| if i not in tmplist: |
| intentStates.append( ( i, " - " ) ) |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| leaders = main.ONOScli1.leaders() |
| try: |
| missing = False |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| # check for election |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| # FIXME: this should only be after we start the app |
| topics.append( "org.onosproject.election" ) |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| missing = True |
| else: |
| main.log.error( "leaders() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| # Check all nodes |
| if missing: |
| for node in main.CLIs: |
| response = node.leaders( jsonFormat=False) |
| main.log.warn( str( node.name ) + " leaders output: \n" + |
| str( response ) ) |
| |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| |
| def CASE4( self, main ): |
| """ |
| Ping across added host intents |
| """ |
| import json |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| main.case( "Verify connectivity by sendind traffic across Intents" ) |
| main.caseExplanation = "Ping across added host intents to check " +\ |
| "functionality and check the state of " +\ |
| "the intent" |
| main.step( "Ping across added host intents" ) |
| PingResult = main.TRUE |
| for i in range( 8, 18 ): |
| ping = main.Mininet1.pingHost( src="h" + str( i ), |
| target="h" + str( i + 10 ) ) |
| PingResult = PingResult and ping |
| if ping == main.FALSE: |
| main.log.warn( "Ping failed between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| elif ping == main.TRUE: |
| main.log.info( "Ping test passed!" ) |
| # Don't set PingResult or you'd override failures |
| if PingResult == main.FALSE: |
| main.log.error( |
| "Intents have not been installed correctly, pings failed." ) |
| # TODO: pretty print |
| main.log.warn( "ONOS1 intents: " ) |
| try: |
| tmpIntents = main.ONOScli1.intents() |
| main.log.warn( json.dumps( json.loads( tmpIntents ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( repr( tmpIntents ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=PingResult, |
| onpass="Intents have been installed correctly and pings work", |
| onfail="Intents have not been installed correctly, pings failed." ) |
| |
| main.step( "Check Intent state" ) |
| installedCheck = False |
| loopCount = 0 |
| while not installedCheck and loopCount < 40: |
| installedCheck = True |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| # Iter through intents of a node |
| try: |
| for intent in json.loads( intents ): |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents." ) |
| # Print states |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| if not installedCheck: |
| time.sleep( 1 ) |
| loopCount += 1 |
| utilities.assert_equals( expect=True, actual=installedCheck, |
| onpass="Intents are all INSTALLED", |
| onfail="Intents are not all in " + |
| "INSTALLED state" ) |
| |
| main.step( "Check leadership of topics" ) |
| leaders = main.ONOScli1.leaders() |
| topicCheck = main.TRUE |
| try: |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| # check for election |
| # TODO: Look at Devices as topics now that it uses this system |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| # FIXME: this should only be after we start the app |
| # FIXME: topics.append( "org.onosproject.election" ) |
| # Print leaders output |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| topicCheck = main.FALSE |
| else: |
| main.log.error( "leaders() returned None" ) |
| topicCheck = main.FALSE |
| except ( ValueError, TypeError ): |
| topicCheck = main.FALSE |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| # TODO: Check for a leader of these topics |
| # Check all nodes |
| if topicCheck: |
| for node in main.CLIs: |
| response = node.leaders( jsonFormat=False) |
| main.log.warn( str( node.name ) + " leaders output: \n" + |
| str( response ) ) |
| |
| utilities.assert_equals( expect=main.TRUE, actual=topicCheck, |
| onpass="intent Partitions is in leaders", |
| onfail="Some topics were lost " ) |
| # Print partitions |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| # Print Pending Map |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| |
| if not installedCheck: |
| main.log.info( "Waiting 60 seconds to see if the state of " + |
| "intents change" ) |
| time.sleep( 60 ) |
| # Print the intent states |
| intents = main.ONOScli1.intents() |
| intentStates = [] |
| main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) ) |
| count = 0 |
| # Iter through intents of a node |
| try: |
| for intent in json.loads( intents ): |
| state = intent.get( 'state', None ) |
| if "INSTALLED" not in state: |
| installedCheck = False |
| intentId = intent.get( 'id', None ) |
| intentStates.append( ( intentId, state ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing intents." ) |
| intentStates.sort() |
| for i, s in intentStates: |
| count += 1 |
| main.log.info( "%-6s%-15s%-15s" % |
| ( str( count ), str( i ), str( s ) ) ) |
| leaders = main.ONOScli1.leaders() |
| try: |
| missing = False |
| if leaders: |
| parsedLeaders = json.loads( leaders ) |
| main.log.warn( json.dumps( parsedLeaders, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # check for all intent partitions |
| # check for election |
| topics = [] |
| for i in range( 14 ): |
| topics.append( "intent-partition-" + str( i ) ) |
| # FIXME: this should only be after we start the app |
| topics.append( "org.onosproject.election" ) |
| main.log.debug( topics ) |
| ONOStopics = [ j['topic'] for j in parsedLeaders ] |
| for topic in topics: |
| if topic not in ONOStopics: |
| main.log.error( "Error: " + topic + |
| " not in leaders" ) |
| missing = True |
| else: |
| main.log.error( "leaders() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing leaders" ) |
| main.log.error( repr( leaders ) ) |
| if missing: |
| for node in main.CLIs: |
| response = node.leaders( jsonFormat=False) |
| main.log.warn( str( node.name ) + " leaders output: \n" + |
| str( response ) ) |
| |
| partitions = main.ONOScli1.partitions() |
| try: |
| if partitions : |
| parsedPartitions = json.loads( partitions ) |
| main.log.warn( json.dumps( parsedPartitions, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check for a leader in all paritions |
| # TODO check for consistency among nodes |
| else: |
| main.log.error( "partitions() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing partitions" ) |
| main.log.error( repr( partitions ) ) |
| pendingMap = main.ONOScli1.pendingMap() |
| try: |
| if pendingMap : |
| parsedPending = json.loads( pendingMap ) |
| main.log.warn( json.dumps( parsedPending, |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| # TODO check something here? |
| else: |
| main.log.error( "pendingMap() returned None" ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing pending map" ) |
| main.log.error( repr( pendingMap ) ) |
| # Print flowrules |
| main.log.debug( main.CLIs[0].flows( jsonFormat=False ) ) |
| main.step( "Wait a minute then ping again" ) |
| # the wait is above |
| PingResult = main.TRUE |
| for i in range( 8, 18 ): |
| ping = main.Mininet1.pingHost( src="h" + str( i ), |
| target="h" + str( i + 10 ) ) |
| PingResult = PingResult and ping |
| if ping == main.FALSE: |
| main.log.warn( "Ping failed between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| elif ping == main.TRUE: |
| main.log.info( "Ping test passed!" ) |
| # Don't set PingResult or you'd override failures |
| if PingResult == main.FALSE: |
| main.log.error( |
| "Intents have not been installed correctly, pings failed." ) |
| # TODO: pretty print |
| main.log.warn( "ONOS1 intents: " ) |
| try: |
| tmpIntents = main.ONOScli1.intents() |
| main.log.warn( json.dumps( json.loads( tmpIntents ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( repr( tmpIntents ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=PingResult, |
| onpass="Intents have been installed correctly and pings work", |
| onfail="Intents have not been installed correctly, pings failed." ) |
| |
| def CASE5( self, main ): |
| """ |
| Reading state of ONOS |
| """ |
| import json |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| |
| main.case( "Setting up and gathering data for current state" ) |
| # The general idea for this test case is to pull the state of |
| # ( intents,flows, topology,... ) from each ONOS node |
| # We can then compare them with each other and also with past states |
| |
| main.step( "Check that each switch has a master" ) |
| global mastershipState |
| mastershipState = '[]' |
| |
| # Assert that each device has a master |
| rolesNotNull = main.TRUE |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].rolesNotNull, |
| name="rolesNotNull-" + str( i ), |
| args=[] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| rolesNotNull = rolesNotNull and t.result |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=rolesNotNull, |
| onpass="Each device has a master", |
| onfail="Some devices don't have a master assigned" ) |
| |
| main.step( "Get the Mastership of each switch from each controller" ) |
| ONOSMastership = [] |
| mastershipCheck = main.FALSE |
| consistentMastership = True |
| rolesResults = True |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].roles, |
| name="roles-" + str( i ), |
| args=[] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| ONOSMastership.append( t.result ) |
| |
| for i in range( main.numCtrls ): |
| if not ONOSMastership[i] or "Error" in ONOSMastership[i]: |
| main.log.error( "Error in getting ONOS" + str( i + 1 ) + |
| " roles" ) |
| main.log.warn( |
| "ONOS" + str( i + 1 ) + " mastership response: " + |
| repr( ONOSMastership[i] ) ) |
| rolesResults = False |
| utilities.assert_equals( |
| expect=True, |
| actual=rolesResults, |
| onpass="No error in reading roles output", |
| onfail="Error in reading roles from ONOS" ) |
| |
| main.step( "Check for consistency in roles from each controller" ) |
| if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ): |
| main.log.info( |
| "Switch roles are consistent across all ONOS nodes" ) |
| else: |
| consistentMastership = False |
| utilities.assert_equals( |
| expect=True, |
| actual=consistentMastership, |
| onpass="Switch roles are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of switch roles" ) |
| |
| if rolesResults and not consistentMastership: |
| for i in range( main.numCtrls ): |
| try: |
| main.log.warn( |
| "ONOS" + str( i + 1 ) + " roles: ", |
| json.dumps( |
| json.loads( ONOSMastership[ i ] ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( repr( ONOSMastership[ i ] ) ) |
| elif rolesResults and consistentMastership: |
| mastershipCheck = main.TRUE |
| mastershipState = ONOSMastership[ 0 ] |
| |
| main.step( "Get the intents from each controller" ) |
| global intentState |
| intentState = [] |
| ONOSIntents = [] |
| intentCheck = main.FALSE |
| consistentIntents = True |
| intentsResults = True |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].intents, |
| name="intents-" + str( i ), |
| args=[], |
| kwargs={ 'jsonFormat': True } ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| ONOSIntents.append( t.result ) |
| |
| for i in range( main.numCtrls ): |
| if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]: |
| main.log.error( "Error in getting ONOS" + str( i + 1 ) + |
| " intents" ) |
| main.log.warn( "ONOS" + str( i + 1 ) + " intents response: " + |
| repr( ONOSIntents[ i ] ) ) |
| intentsResults = False |
| utilities.assert_equals( |
| expect=True, |
| actual=intentsResults, |
| onpass="No error in reading intents output", |
| onfail="Error in reading intents from ONOS" ) |
| |
| main.step( "Check for consistency in Intents from each controller" ) |
| if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ): |
| main.log.info( "Intents are consistent across all ONOS " + |
| "nodes" ) |
| else: |
| consistentIntents = False |
| main.log.error( "Intents not consistent" ) |
| utilities.assert_equals( |
| expect=True, |
| actual=consistentIntents, |
| onpass="Intents are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of intents" ) |
| |
| if intentsResults: |
| # Try to make it easy to figure out what is happening |
| # |
| # Intent ONOS1 ONOS2 ... |
| # 0x01 INSTALLED INSTALLING |
| # ... ... ... |
| # ... ... ... |
| title = " Id" |
| for n in range( main.numCtrls ): |
| title += " " * 10 + "ONOS" + str( n + 1 ) |
| main.log.warn( title ) |
| # get all intent keys in the cluster |
| keys = [] |
| try: |
| # Get the set of all intent keys |
| for nodeStr in ONOSIntents: |
| node = json.loads( nodeStr ) |
| for intent in node: |
| keys.append( intent.get( 'id' ) ) |
| keys = set( keys ) |
| # For each intent key, print the state on each node |
| for key in keys: |
| row = "%-13s" % key |
| for nodeStr in ONOSIntents: |
| node = json.loads( nodeStr ) |
| for intent in node: |
| if intent.get( 'id', "Error" ) == key: |
| row += "%-15s" % intent.get( 'state' ) |
| main.log.warn( row ) |
| # End of intent state table |
| except ValueError as e: |
| main.log.exception( e ) |
| main.log.debug( "nodeStr was: " + repr( nodeStr ) ) |
| |
| if intentsResults and not consistentIntents: |
| # print the json objects |
| n = len(ONOSIntents) |
| main.log.debug( "ONOS" + str( n ) + " intents: " ) |
| main.log.debug( json.dumps( json.loads( ONOSIntents[ -1 ] ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| for i in range( main.numCtrls ): |
| if ONOSIntents[ i ] != ONOSIntents[ -1 ]: |
| main.log.debug( "ONOS" + str( i + 1 ) + " intents: " ) |
| main.log.debug( json.dumps( json.loads( ONOSIntents[i] ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| else: |
| main.log.debug( main.nodes[ i ].name + " intents match ONOS" + |
| str( n ) + " intents" ) |
| elif intentsResults and consistentIntents: |
| intentCheck = main.TRUE |
| intentState = ONOSIntents[ 0 ] |
| |
| main.step( "Get the flows from each controller" ) |
| global flowState |
| flowState = [] |
| ONOSFlows = [] |
| ONOSFlowsJson = [] |
| flowCheck = main.FALSE |
| consistentFlows = True |
| flowsResults = True |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].flows, |
| name="flows-" + str( i ), |
| args=[], |
| kwargs={ 'jsonFormat': True } ) |
| threads.append( t ) |
| t.start() |
| |
| # NOTE: Flows command can take some time to run |
| time.sleep(30) |
| for t in threads: |
| t.join() |
| result = t.result |
| ONOSFlows.append( result ) |
| |
| for i in range( main.numCtrls ): |
| num = str( i + 1 ) |
| if not ONOSFlows[ i ] or "Error" in ONOSFlows[ i ]: |
| main.log.error( "Error in getting ONOS" + num + " flows" ) |
| main.log.warn( "ONOS" + num + " flows response: " + |
| repr( ONOSFlows[ i ] ) ) |
| flowsResults = False |
| ONOSFlowsJson.append( None ) |
| else: |
| try: |
| ONOSFlowsJson.append( json.loads( ONOSFlows[ i ] ) ) |
| except ( ValueError, TypeError ): |
| # FIXME: change this to log.error? |
| main.log.exception( "Error in parsing ONOS" + num + |
| " response as json." ) |
| main.log.error( repr( ONOSFlows[ i ] ) ) |
| ONOSFlowsJson.append( None ) |
| flowsResults = False |
| utilities.assert_equals( |
| expect=True, |
| actual=flowsResults, |
| onpass="No error in reading flows output", |
| onfail="Error in reading flows from ONOS" ) |
| |
| main.step( "Check for consistency in Flows from each controller" ) |
| tmp = [ len( i ) == len( ONOSFlowsJson[ 0 ] ) for i in ONOSFlowsJson ] |
| if all( tmp ): |
| main.log.info( "Flow count is consistent across all ONOS nodes" ) |
| else: |
| consistentFlows = False |
| utilities.assert_equals( |
| expect=True, |
| actual=consistentFlows, |
| onpass="The flow count is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different flow counts" ) |
| |
| if flowsResults and not consistentFlows: |
| for i in range( main.numCtrls ): |
| try: |
| main.log.warn( |
| "ONOS" + str( i + 1 ) + " flows: " + |
| json.dumps( json.loads( ONOSFlows[i] ), sort_keys=True, |
| indent=4, separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.warn( |
| "ONOS" + str( i + 1 ) + " flows: " + |
| repr( ONOSFlows[ i ] ) ) |
| elif flowsResults and consistentFlows: |
| flowCheck = main.TRUE |
| flowState = ONOSFlows[ 0 ] |
| |
| main.step( "Get the OF Table entries" ) |
| global flows |
| flows = [] |
| for i in range( 1, 29 ): |
| flows.append( main.Mininet1.getFlowTable( "s" + str( i ), version="1.3", debug=False ) ) |
| if flowCheck == main.FALSE: |
| for table in flows: |
| main.log.warn( table ) |
| |
| # TODO: Compare switch flow tables with ONOS flow tables |
| |
| main.step( "Start continuous pings" ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source1' ], |
| target=main.params[ 'PING' ][ 'target1' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source2' ], |
| target=main.params[ 'PING' ][ 'target2' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source3' ], |
| target=main.params[ 'PING' ][ 'target3' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source4' ], |
| target=main.params[ 'PING' ][ 'target4' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source5' ], |
| target=main.params[ 'PING' ][ 'target5' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source6' ], |
| target=main.params[ 'PING' ][ 'target6' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source7' ], |
| target=main.params[ 'PING' ][ 'target7' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source8' ], |
| target=main.params[ 'PING' ][ 'target8' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source9' ], |
| target=main.params[ 'PING' ][ 'target9' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source10' ], |
| target=main.params[ 'PING' ][ 'target10' ], |
| pingTime=500 ) |
| |
| main.step( "Collecting topology information from ONOS" ) |
| devices = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].devices, |
| name="devices-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| devices.append( t.result ) |
| hosts = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].hosts, |
| name="hosts-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| try: |
| hosts.append( json.loads( t.result ) ) |
| except ( ValueError, TypeError ): |
| # FIXME: better handling of this, print which node |
| # Maybe use thread name? |
| main.log.exception( "Error parsing json output of hosts" ) |
| main.log.warn( repr( t.result ) ) |
| hosts.append( None ) |
| |
| ports = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].ports, |
| name="ports-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| ports.append( t.result ) |
| links = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].links, |
| name="links-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| links.append( t.result ) |
| clusters = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].clusters, |
| name="clusters-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| clusters.append( t.result ) |
| # Compare json objects for hosts and dataplane clusters |
| |
| # hosts |
| main.step( "Host view is consistent across ONOS nodes" ) |
| consistentHostsResult = main.TRUE |
| for controller in range( len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| if hosts[ controller ] and "Error" not in hosts[ controller ]: |
| if hosts[ controller ] == hosts[ 0 ]: |
| continue |
| else: # hosts not consistent |
| main.log.error( "hosts from ONOS" + |
| controllerStr + |
| " is inconsistent with ONOS1" ) |
| main.log.warn( repr( hosts[ controller ] ) ) |
| consistentHostsResult = main.FALSE |
| |
| else: |
| main.log.error( "Error in getting ONOS hosts from ONOS" + |
| controllerStr ) |
| consistentHostsResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " hosts response: " + |
| repr( hosts[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentHostsResult, |
| onpass="Hosts view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of hosts" ) |
| |
| main.step( "Each host has an IP address" ) |
| ipResult = main.TRUE |
| for controller in range( 0, len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| if hosts[ controller ]: |
| for host in hosts[ controller ]: |
| if not host.get( 'ipAddresses', [ ] ): |
| main.log.error( "Error with host ips on controller" + |
| controllerStr + ": " + str( host ) ) |
| ipResult = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=ipResult, |
| onpass="The ips of the hosts aren't empty", |
| onfail="The ip of at least one host is missing" ) |
| |
| # Strongly connected clusters of devices |
| main.step( "Cluster view is consistent across ONOS nodes" ) |
| consistentClustersResult = main.TRUE |
| for controller in range( len( clusters ) ): |
| controllerStr = str( controller + 1 ) |
| if "Error" not in clusters[ controller ]: |
| if clusters[ controller ] == clusters[ 0 ]: |
| continue |
| else: # clusters not consistent |
| main.log.error( "clusters from ONOS" + controllerStr + |
| " is inconsistent with ONOS1" ) |
| consistentClustersResult = main.FALSE |
| |
| else: |
| main.log.error( "Error in getting dataplane clusters " + |
| "from ONOS" + controllerStr ) |
| consistentClustersResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " clusters response: " + |
| repr( clusters[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentClustersResult, |
| onpass="Clusters view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of clusters" ) |
| # there should always only be one cluster |
| main.step( "Cluster view correct across ONOS nodes" ) |
| try: |
| numClusters = len( json.loads( clusters[ 0 ] ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing clusters[0]: " + |
| repr( clusters[ 0 ] ) ) |
| clusterResults = main.FALSE |
| if numClusters == 1: |
| clusterResults = main.TRUE |
| utilities.assert_equals( |
| expect=1, |
| actual=numClusters, |
| onpass="ONOS shows 1 SCC", |
| onfail="ONOS shows " + str( numClusters ) + " SCCs" ) |
| |
| main.step( "Comparing ONOS topology to MN" ) |
| devicesResults = main.TRUE |
| linksResults = main.TRUE |
| hostsResults = main.TRUE |
| mnSwitches = main.Mininet1.getSwitches() |
| mnLinks = main.Mininet1.getLinks() |
| mnHosts = main.Mininet1.getHosts() |
| for controller in range( main.numCtrls ): |
| controllerStr = str( controller + 1 ) |
| if devices[ controller ] and ports[ controller ] and\ |
| "Error" not in devices[ controller ] and\ |
| "Error" not in ports[ controller ]: |
| |
| currentDevicesResult = main.Mininet1.compareSwitches( |
| mnSwitches, |
| json.loads( devices[ controller ] ), |
| json.loads( ports[ controller ] ) ) |
| else: |
| currentDevicesResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentDevicesResult, |
| onpass="ONOS" + controllerStr + |
| " Switches view is correct", |
| onfail="ONOS" + controllerStr + |
| " Switches view is incorrect" ) |
| if links[ controller ] and "Error" not in links[ controller ]: |
| currentLinksResult = main.Mininet1.compareLinks( |
| mnSwitches, mnLinks, |
| json.loads( links[ controller ] ) ) |
| else: |
| currentLinksResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentLinksResult, |
| onpass="ONOS" + controllerStr + |
| " links view is correct", |
| onfail="ONOS" + controllerStr + |
| " links view is incorrect" ) |
| |
| if hosts[ controller ] and "Error" not in hosts[ controller ]: |
| currentHostsResult = main.Mininet1.compareHosts( |
| mnHosts, |
| hosts[ controller ] ) |
| else: |
| currentHostsResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentHostsResult, |
| onpass="ONOS" + controllerStr + |
| " hosts exist in Mininet", |
| onfail="ONOS" + controllerStr + |
| " hosts don't match Mininet" ) |
| |
| devicesResults = devicesResults and currentDevicesResult |
| linksResults = linksResults and currentLinksResult |
| hostsResults = hostsResults and currentHostsResult |
| |
| main.step( "Device information is correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=devicesResults, |
| onpass="Device information is correct", |
| onfail="Device information is incorrect" ) |
| |
| main.step( "Links are correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=linksResults, |
| onpass="Link are correct", |
| onfail="Links are incorrect" ) |
| |
| main.step( "Hosts are correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=hostsResults, |
| onpass="Hosts are correct", |
| onfail="Hosts are incorrect" ) |
| |
| def CASE6( self, main ): |
| """ |
| The Failure case. Since this is the Sanity test, we do nothing. |
| """ |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| main.case( "Wait 60 seconds instead of inducing a failure" ) |
| time.sleep( 60 ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=main.TRUE, |
| onpass="Sleeping 60 seconds", |
| onfail="Something is terribly wrong with my math" ) |
| |
| def CASE7( self, main ): |
| """ |
| Check state after ONOS failure |
| """ |
| import json |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| main.case( "Running ONOS Constant State Tests" ) |
| |
| main.step( "Check that each switch has a master" ) |
| # Assert that each device has a master |
| rolesNotNull = main.TRUE |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].rolesNotNull, |
| name="rolesNotNull-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| rolesNotNull = rolesNotNull and t.result |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=rolesNotNull, |
| onpass="Each device has a master", |
| onfail="Some devices don't have a master assigned" ) |
| |
| main.step( "Read device roles from ONOS" ) |
| ONOSMastership = [] |
| mastershipCheck = main.FALSE |
| consistentMastership = True |
| rolesResults = True |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].roles, |
| name="roles-" + str( i ), |
| args=[] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| ONOSMastership.append( t.result ) |
| |
| for i in range( main.numCtrls ): |
| if not ONOSMastership[i] or "Error" in ONOSMastership[i]: |
| main.log.error( "Error in getting ONOS" + str( i + 1 ) + |
| " roles" ) |
| main.log.warn( |
| "ONOS" + str( i + 1 ) + " mastership response: " + |
| repr( ONOSMastership[i] ) ) |
| rolesResults = False |
| utilities.assert_equals( |
| expect=True, |
| actual=rolesResults, |
| onpass="No error in reading roles output", |
| onfail="Error in reading roles from ONOS" ) |
| |
| main.step( "Check for consistency in roles from each controller" ) |
| if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ): |
| main.log.info( |
| "Switch roles are consistent across all ONOS nodes" ) |
| else: |
| consistentMastership = False |
| utilities.assert_equals( |
| expect=True, |
| actual=consistentMastership, |
| onpass="Switch roles are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of switch roles" ) |
| |
| if rolesResults and not consistentMastership: |
| for i in range( main.numCtrls ): |
| main.log.warn( |
| "ONOS" + str( i + 1 ) + " roles: ", |
| json.dumps( |
| json.loads( ONOSMastership[ i ] ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| elif rolesResults and not consistentMastership: |
| mastershipCheck = main.TRUE |
| |
| description2 = "Compare switch roles from before failure" |
| main.step( description2 ) |
| try: |
| currentJson = json.loads( ONOSMastership[0] ) |
| oldJson = json.loads( mastershipState ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Something is wrong with parsing " + |
| "ONOSMastership[0] or mastershipState" ) |
| main.log.error( "ONOSMastership[0]: " + repr( ONOSMastership[0] ) ) |
| main.log.error( "mastershipState" + repr( mastershipState ) ) |
| main.cleanup() |
| main.exit() |
| mastershipCheck = main.TRUE |
| for i in range( 1, 29 ): |
| switchDPID = str( |
| main.Mininet1.getSwitchDPID( switch="s" + str( i ) ) ) |
| current = [ switch[ 'master' ] for switch in currentJson |
| if switchDPID in switch[ 'id' ] ] |
| old = [ switch[ 'master' ] for switch in oldJson |
| if switchDPID in switch[ 'id' ] ] |
| if current == old: |
| mastershipCheck = mastershipCheck and main.TRUE |
| else: |
| main.log.warn( "Mastership of switch %s changed" % switchDPID ) |
| mastershipCheck = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=mastershipCheck, |
| onpass="Mastership of Switches was not changed", |
| onfail="Mastership of some switches changed" ) |
| mastershipCheck = mastershipCheck and consistentMastership |
| |
| main.step( "Get the intents and compare across all nodes" ) |
| ONOSIntents = [] |
| intentCheck = main.FALSE |
| consistentIntents = True |
| intentsResults = True |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].intents, |
| name="intents-" + str( i ), |
| args=[], |
| kwargs={ 'jsonFormat': True } ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| ONOSIntents.append( t.result ) |
| |
| for i in range( main.numCtrls ): |
| if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]: |
| main.log.error( "Error in getting ONOS" + str( i + 1 ) + |
| " intents" ) |
| main.log.warn( "ONOS" + str( i + 1 ) + " intents response: " + |
| repr( ONOSIntents[ i ] ) ) |
| intentsResults = False |
| utilities.assert_equals( |
| expect=True, |
| actual=intentsResults, |
| onpass="No error in reading intents output", |
| onfail="Error in reading intents from ONOS" ) |
| |
| main.step( "Check for consistency in Intents from each controller" ) |
| if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ): |
| main.log.info( "Intents are consistent across all ONOS " + |
| "nodes" ) |
| else: |
| consistentIntents = False |
| |
| # Try to make it easy to figure out what is happening |
| # |
| # Intent ONOS1 ONOS2 ... |
| # 0x01 INSTALLED INSTALLING |
| # ... ... ... |
| # ... ... ... |
| title = " ID" |
| for n in range( main.numCtrls ): |
| title += " " * 10 + "ONOS" + str( n + 1 ) |
| main.log.warn( title ) |
| # get all intent keys in the cluster |
| keys = [] |
| for nodeStr in ONOSIntents: |
| node = json.loads( nodeStr ) |
| for intent in node: |
| keys.append( intent.get( 'id' ) ) |
| keys = set( keys ) |
| for key in keys: |
| row = "%-13s" % key |
| for nodeStr in ONOSIntents: |
| node = json.loads( nodeStr ) |
| for intent in node: |
| if intent.get( 'id' ) == key: |
| row += "%-15s" % intent.get( 'state' ) |
| main.log.warn( row ) |
| # End table view |
| |
| utilities.assert_equals( |
| expect=True, |
| actual=consistentIntents, |
| onpass="Intents are consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of intents" ) |
| intentStates = [] |
| for node in ONOSIntents: # Iter through ONOS nodes |
| nodeStates = [] |
| # Iter through intents of a node |
| try: |
| for intent in json.loads( node ): |
| nodeStates.append( intent[ 'state' ] ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error in parsing intents" ) |
| main.log.error( repr( node ) ) |
| intentStates.append( nodeStates ) |
| out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ] |
| main.log.info( dict( out ) ) |
| |
| if intentsResults and not consistentIntents: |
| for i in range( main.numCtrls ): |
| main.log.warn( "ONOS" + str( i + 1 ) + " intents: " ) |
| main.log.warn( json.dumps( |
| json.loads( ONOSIntents[ i ] ), |
| sort_keys=True, |
| indent=4, |
| separators=( ',', ': ' ) ) ) |
| elif intentsResults and consistentIntents: |
| intentCheck = main.TRUE |
| |
| # NOTE: Store has no durability, so intents are lost across system |
| # restarts |
| main.step( "Compare current intents with intents before the failure" ) |
| # NOTE: this requires case 5 to pass for intentState to be set. |
| # maybe we should stop the test if that fails? |
| sameIntents = main.FALSE |
| if intentState and intentState == ONOSIntents[ 0 ]: |
| sameIntents = main.TRUE |
| main.log.info( "Intents are consistent with before failure" ) |
| # TODO: possibly the states have changed? we may need to figure out |
| # what the acceptable states are |
| elif len( intentState ) == len( ONOSIntents[ 0 ] ): |
| sameIntents = main.TRUE |
| try: |
| before = json.loads( intentState ) |
| after = json.loads( ONOSIntents[ 0 ] ) |
| for intent in before: |
| if intent not in after: |
| sameIntents = main.FALSE |
| main.log.debug( "Intent is not currently in ONOS " + |
| "(at least in the same form):" ) |
| main.log.debug( json.dumps( intent ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Exception printing intents" ) |
| main.log.debug( repr( ONOSIntents[0] ) ) |
| main.log.debug( repr( intentState ) ) |
| if sameIntents == main.FALSE: |
| try: |
| main.log.debug( "ONOS intents before: " ) |
| main.log.debug( json.dumps( json.loads( intentState ), |
| sort_keys=True, indent=4, |
| separators=( ',', ': ' ) ) ) |
| main.log.debug( "Current ONOS intents: " ) |
| main.log.debug( json.dumps( json.loads( ONOSIntents[ 0 ] ), |
| sort_keys=True, indent=4, |
| separators=( ',', ': ' ) ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Exception printing intents" ) |
| main.log.debug( repr( ONOSIntents[0] ) ) |
| main.log.debug( repr( intentState ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=sameIntents, |
| onpass="Intents are consistent with before failure", |
| onfail="The Intents changed during failure" ) |
| intentCheck = intentCheck and sameIntents |
| |
| main.step( "Get the OF Table entries and compare to before " + |
| "component failure" ) |
| FlowTables = main.TRUE |
| for i in range( 28 ): |
| main.log.info( "Checking flow table on s" + str( i + 1 ) ) |
| tmpFlows = main.Mininet1.getFlowTable( "s" + str( i + 1 ), version="1.3", debug=False ) |
| FlowTables = FlowTables and main.Mininet1.flowTableComp( flows[i], tmpFlows ) |
| if FlowTables == main.FALSE: |
| main.log.warn( "Differences in flow table for switch: s{}".format( i + 1 ) ) |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=FlowTables, |
| onpass="No changes were found in the flow tables", |
| onfail="Changes were found in the flow tables" ) |
| |
| main.Mininet2.pingLongKill() |
| ''' |
| main.step( "Check the continuous pings to ensure that no packets " + |
| "were dropped during component failure" ) |
| main.Mininet2.pingKill( main.params[ 'TESTONUSER' ], |
| main.params[ 'TESTONIP' ] ) |
| LossInPings = main.FALSE |
| # NOTE: checkForLoss returns main.FALSE with 0% packet loss |
| for i in range( 8, 18 ): |
| main.log.info( |
| "Checking for a loss in pings along flow from s" + |
| str( i ) ) |
| LossInPings = main.Mininet2.checkForLoss( |
| "/tmp/ping.h" + |
| str( i ) ) or LossInPings |
| if LossInPings == main.TRUE: |
| main.log.info( "Loss in ping detected" ) |
| elif LossInPings == main.ERROR: |
| main.log.info( "There are multiple mininet process running" ) |
| elif LossInPings == main.FALSE: |
| main.log.info( "No Loss in the pings" ) |
| main.log.info( "No loss of dataplane connectivity" ) |
| utilities.assert_equals( |
| expect=main.FALSE, |
| actual=LossInPings, |
| onpass="No Loss of connectivity", |
| onfail="Loss of dataplane connectivity detected" ) |
| ''' |
| |
| main.step( "Leadership Election is still functional" ) |
| # Test of LeadershipElection |
| # NOTE: this only works for the sanity test. In case of failures, |
| # leader will likely change |
| leader = main.nodes[ 0 ].ip_address |
| leaderResult = main.TRUE |
| for cli in main.CLIs: |
| leaderN = cli.electionTestLeader() |
| # verify leader is ONOS1 |
| if leaderN == leader: |
| # all is well |
| # NOTE: In failure scenario, this could be a new node, maybe |
| # check != ONOS1 |
| pass |
| elif leaderN == main.FALSE: |
| # error in response |
| main.log.error( "Something is wrong with " + |
| "electionTestLeader function, check the" + |
| " error logs" ) |
| leaderResult = main.FALSE |
| elif leader != leaderN: |
| leaderResult = main.FALSE |
| main.log.error( cli.name + " sees " + str( leaderN ) + |
| " as the leader of the election app. " + |
| "Leader should be " + str( leader ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| def CASE8( self, main ): |
| """ |
| Compare topo |
| """ |
| import json |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| |
| main.case( "Compare ONOS Topology view to Mininet topology" ) |
| main.caseExplanation = "Compare topology objects between Mininet" +\ |
| " and ONOS" |
| topoResult = main.FALSE |
| elapsed = 0 |
| count = 0 |
| main.step( "Comparing ONOS topology to MN topology" ) |
| startTime = time.time() |
| # Give time for Gossip to work |
| while topoResult == main.FALSE and ( elapsed < 60 or count < 3 ): |
| devicesResults = main.TRUE |
| linksResults = main.TRUE |
| hostsResults = main.TRUE |
| hostAttachmentResults = True |
| count += 1 |
| cliStart = time.time() |
| devices = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].devices, |
| name="devices-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| devices.append( t.result ) |
| hosts = [] |
| ipResult = main.TRUE |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=utilities.retry, |
| name="hosts-" + str( i ), |
| args=[ main.CLIs[i].hosts, [ None ] ], |
| kwargs= { 'sleep': 5, 'attempts': 5, |
| 'randomTime': True } ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| try: |
| hosts.append( json.loads( t.result ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing hosts results" ) |
| main.log.error( repr( t.result ) ) |
| hosts.append( None ) |
| for controller in range( 0, len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| if hosts[ controller ]: |
| for host in hosts[ controller ]: |
| if host is None or host.get( 'ipAddresses', [] ) == []: |
| main.log.error( |
| "Error with host ipAddresses on controller" + |
| controllerStr + ": " + str( host ) ) |
| ipResult = main.FALSE |
| ports = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].ports, |
| name="ports-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| ports.append( t.result ) |
| links = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].links, |
| name="links-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| links.append( t.result ) |
| clusters = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].clusters, |
| name="clusters-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| clusters.append( t.result ) |
| |
| elapsed = time.time() - startTime |
| cliTime = time.time() - cliStart |
| print "Elapsed time: " + str( elapsed ) |
| print "CLI time: " + str( cliTime ) |
| |
| mnSwitches = main.Mininet1.getSwitches() |
| mnLinks = main.Mininet1.getLinks() |
| mnHosts = main.Mininet1.getHosts() |
| for controller in range( main.numCtrls ): |
| controllerStr = str( controller + 1 ) |
| if devices[ controller ] and ports[ controller ] and\ |
| "Error" not in devices[ controller ] and\ |
| "Error" not in ports[ controller ]: |
| |
| currentDevicesResult = main.Mininet1.compareSwitches( |
| mnSwitches, |
| json.loads( devices[ controller ] ), |
| json.loads( ports[ controller ] ) ) |
| else: |
| currentDevicesResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentDevicesResult, |
| onpass="ONOS" + controllerStr + |
| " Switches view is correct", |
| onfail="ONOS" + controllerStr + |
| " Switches view is incorrect" ) |
| |
| if links[ controller ] and "Error" not in links[ controller ]: |
| currentLinksResult = main.Mininet1.compareLinks( |
| mnSwitches, mnLinks, |
| json.loads( links[ controller ] ) ) |
| else: |
| currentLinksResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentLinksResult, |
| onpass="ONOS" + controllerStr + |
| " links view is correct", |
| onfail="ONOS" + controllerStr + |
| " links view is incorrect" ) |
| if hosts[ controller ] and "Error" not in hosts[ controller ]: |
| currentHostsResult = main.Mininet1.compareHosts( |
| mnHosts, |
| hosts[ controller ] ) |
| elif hosts[ controller ] == []: |
| currentHostsResult = main.TRUE |
| else: |
| currentHostsResult = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=currentHostsResult, |
| onpass="ONOS" + controllerStr + |
| " hosts exist in Mininet", |
| onfail="ONOS" + controllerStr + |
| " hosts don't match Mininet" ) |
| # CHECKING HOST ATTACHMENT POINTS |
| hostAttachment = True |
| zeroHosts = False |
| # FIXME: topo-HA/obelisk specific mappings: |
| # key is mac and value is dpid |
| mappings = {} |
| for i in range( 1, 29 ): # hosts 1 through 28 |
| # set up correct variables: |
| macId = "00:" * 5 + hex( i ).split( "0x" )[1].upper().zfill(2) |
| if i == 1: |
| deviceId = "1000".zfill(16) |
| elif i == 2: |
| deviceId = "2000".zfill(16) |
| elif i == 3: |
| deviceId = "3000".zfill(16) |
| elif i == 4: |
| deviceId = "3004".zfill(16) |
| elif i == 5: |
| deviceId = "5000".zfill(16) |
| elif i == 6: |
| deviceId = "6000".zfill(16) |
| elif i == 7: |
| deviceId = "6007".zfill(16) |
| elif i >= 8 and i <= 17: |
| dpid = '3' + str( i ).zfill( 3 ) |
| deviceId = dpid.zfill(16) |
| elif i >= 18 and i <= 27: |
| dpid = '6' + str( i ).zfill( 3 ) |
| deviceId = dpid.zfill(16) |
| elif i == 28: |
| deviceId = "2800".zfill(16) |
| mappings[ macId ] = deviceId |
| if hosts[ controller ] is not None and "Error" not in hosts[ controller ]: |
| if hosts[ controller ] == []: |
| main.log.warn( "There are no hosts discovered" ) |
| zeroHosts = True |
| else: |
| for host in hosts[ controller ]: |
| mac = None |
| location = None |
| device = None |
| port = None |
| try: |
| mac = host.get( 'mac' ) |
| assert mac, "mac field could not be found for this host object" |
| |
| location = host.get( 'location' ) |
| assert location, "location field could not be found for this host object" |
| |
| # Trim the protocol identifier off deviceId |
| device = str( location.get( 'elementId' ) ).split(':')[1] |
| assert device, "elementId field could not be found for this host location object" |
| |
| port = location.get( 'port' ) |
| assert port, "port field could not be found for this host location object" |
| |
| # Now check if this matches where they should be |
| if mac and device and port: |
| if str( port ) != "1": |
| main.log.error( "The attachment port is incorrect for " + |
| "host " + str( mac ) + |
| ". Expected: 1 Actual: " + str( port) ) |
| hostAttachment = False |
| if device != mappings[ str( mac ) ]: |
| main.log.error( "The attachment device is incorrect for " + |
| "host " + str( mac ) + |
| ". Expected: " + mappings[ str( mac ) ] + |
| " Actual: " + device ) |
| hostAttachment = False |
| else: |
| hostAttachment = False |
| except AssertionError: |
| main.log.exception( "Json object not as expected" ) |
| main.log.error( repr( host ) ) |
| hostAttachment = False |
| else: |
| main.log.error( "No hosts json output or \"Error\"" + |
| " in output. hosts = " + |
| repr( hosts[ controller ] ) ) |
| if zeroHosts is False: |
| hostAttachment = True |
| |
| # END CHECKING HOST ATTACHMENT POINTS |
| devicesResults = devicesResults and currentDevicesResult |
| linksResults = linksResults and currentLinksResult |
| hostsResults = hostsResults and currentHostsResult |
| hostAttachmentResults = hostAttachmentResults and\ |
| hostAttachment |
| topoResult = ( devicesResults and linksResults |
| and hostsResults and ipResult and |
| hostAttachmentResults ) |
| utilities.assert_equals( expect=True, |
| actual=topoResult, |
| onpass="ONOS topology matches Mininet", |
| onfail="ONOS topology don't match Mininet" ) |
| # End of While loop to pull ONOS state |
| |
| # Compare json objects for hosts and dataplane clusters |
| |
| # hosts |
| main.step( "Hosts view is consistent across all ONOS nodes" ) |
| consistentHostsResult = main.TRUE |
| for controller in range( len( hosts ) ): |
| controllerStr = str( controller + 1 ) |
| if hosts[ controller ] is not None and "Error" not in hosts[ controller ]: |
| if hosts[ controller ] == hosts[ 0 ]: |
| continue |
| else: # hosts not consistent |
| main.log.error( "hosts from ONOS" + controllerStr + |
| " is inconsistent with ONOS1" ) |
| main.log.warn( repr( hosts[ controller ] ) ) |
| consistentHostsResult = main.FALSE |
| |
| else: |
| main.log.error( "Error in getting ONOS hosts from ONOS" + |
| controllerStr ) |
| consistentHostsResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " hosts response: " + |
| repr( hosts[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentHostsResult, |
| onpass="Hosts view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of hosts" ) |
| |
| main.step( "Hosts information is correct" ) |
| hostsResults = hostsResults and ipResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=hostsResults, |
| onpass="Host information is correct", |
| onfail="Host information is incorrect" ) |
| |
| main.step( "Host attachment points to the network" ) |
| utilities.assert_equals( |
| expect=True, |
| actual=hostAttachmentResults, |
| onpass="Hosts are correctly attached to the network", |
| onfail="ONOS did not correctly attach hosts to the network" ) |
| |
| # Strongly connected clusters of devices |
| main.step( "Clusters view is consistent across all ONOS nodes" ) |
| consistentClustersResult = main.TRUE |
| for controller in range( len( clusters ) ): |
| controllerStr = str( controller + 1 ) |
| if "Error" not in clusters[ controller ]: |
| if clusters[ controller ] == clusters[ 0 ]: |
| continue |
| else: # clusters not consistent |
| main.log.error( "clusters from ONOS" + |
| controllerStr + |
| " is inconsistent with ONOS1" ) |
| consistentClustersResult = main.FALSE |
| |
| else: |
| main.log.error( "Error in getting dataplane clusters " + |
| "from ONOS" + controllerStr ) |
| consistentClustersResult = main.FALSE |
| main.log.warn( "ONOS" + controllerStr + |
| " clusters response: " + |
| repr( clusters[ controller ] ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=consistentClustersResult, |
| onpass="Clusters view is consistent across all ONOS nodes", |
| onfail="ONOS nodes have different views of clusters" ) |
| |
| main.step( "There is only one SCC" ) |
| # there should always only be one cluster |
| try: |
| numClusters = len( json.loads( clusters[ 0 ] ) ) |
| except ( ValueError, TypeError ): |
| main.log.exception( "Error parsing clusters[0]: " + |
| repr( clusters[0] ) ) |
| clusterResults = main.FALSE |
| if numClusters == 1: |
| clusterResults = main.TRUE |
| utilities.assert_equals( |
| expect=1, |
| actual=numClusters, |
| onpass="ONOS shows 1 SCC", |
| onfail="ONOS shows " + str( numClusters ) + " SCCs" ) |
| |
| topoResult = ( devicesResults and linksResults |
| and hostsResults and consistentHostsResult |
| and consistentClustersResult and clusterResults |
| and ipResult and hostAttachmentResults ) |
| |
| topoResult = topoResult and int( count <= 2 ) |
| note = "note it takes about " + str( int( cliTime ) ) + \ |
| " seconds for the test to make all the cli calls to fetch " +\ |
| "the topology from each ONOS instance" |
| main.log.info( |
| "Very crass estimate for topology discovery/convergence( " + |
| str( note ) + " ): " + str( elapsed ) + " seconds, " + |
| str( count ) + " tries" ) |
| |
| main.step( "Device information is correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=devicesResults, |
| onpass="Device information is correct", |
| onfail="Device information is incorrect" ) |
| |
| main.step( "Links are correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=linksResults, |
| onpass="Link are correct", |
| onfail="Links are incorrect" ) |
| |
| main.step( "Hosts are correct" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=hostsResults, |
| onpass="Hosts are correct", |
| onfail="Hosts are incorrect" ) |
| |
| # FIXME: move this to an ONOS state case |
| main.step( "Checking ONOS nodes" ) |
| nodesOutput = [] |
| nodeResults = main.TRUE |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].nodes, |
| name="nodes-" + str( i ), |
| args=[ ] ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| nodesOutput.append( t.result ) |
| ips = [ node.ip_address for node in main.nodes ] |
| ips.sort() |
| for i in nodesOutput: |
| try: |
| current = json.loads( i ) |
| activeIps = [] |
| currentResult = main.FALSE |
| for node in current: |
| if node['state'] == 'ACTIVE': |
| activeIps.append( node['ip'] ) |
| activeIps.sort() |
| if ips == activeIps: |
| currentResult = main.TRUE |
| except ( ValueError, TypeError ): |
| main.log.error( "Error parsing nodes output" ) |
| main.log.warn( repr( i ) ) |
| currentResult = main.FALSE |
| nodeResults = nodeResults and currentResult |
| utilities.assert_equals( expect=main.TRUE, actual=nodeResults, |
| onpass="Nodes check successful", |
| onfail="Nodes check NOT successful" ) |
| |
| def CASE9( self, main ): |
| """ |
| Link s3-s28 down |
| """ |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| # NOTE: You should probably run a topology check after this |
| |
| linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| |
| description = "Turn off a link to ensure that Link Discovery " +\ |
| "is working properly" |
| main.case( description ) |
| |
| main.step( "Kill Link between s3 and s28" ) |
| LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" ) |
| main.log.info( "Waiting " + str( linkSleep ) + |
| " seconds for link down to be discovered" ) |
| time.sleep( linkSleep ) |
| utilities.assert_equals( expect=main.TRUE, actual=LinkDown, |
| onpass="Link down successful", |
| onfail="Failed to bring link down" ) |
| # TODO do some sort of check here |
| |
| def CASE10( self, main ): |
| """ |
| Link s3-s28 up |
| """ |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| # NOTE: You should probably run a topology check after this |
| |
| linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| |
| description = "Restore a link to ensure that Link Discovery is " + \ |
| "working properly" |
| main.case( description ) |
| |
| main.step( "Bring link between s3 and s28 back up" ) |
| LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" ) |
| main.log.info( "Waiting " + str( linkSleep ) + |
| " seconds for link up to be discovered" ) |
| time.sleep( linkSleep ) |
| utilities.assert_equals( expect=main.TRUE, actual=LinkUp, |
| onpass="Link up successful", |
| onfail="Failed to bring link up" ) |
| # TODO do some sort of check here |
| |
| def CASE11( self, main ): |
| """ |
| Switch Down |
| """ |
| # NOTE: You should probably run a topology check after this |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| |
| switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| |
| description = "Killing a switch to ensure it is discovered correctly" |
| main.case( description ) |
| switch = main.params[ 'kill' ][ 'switch' ] |
| switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| |
| # TODO: Make this switch parameterizable |
| main.step( "Kill " + switch ) |
| main.log.info( "Deleting " + switch ) |
| main.Mininet1.delSwitch( switch ) |
| main.log.info( "Waiting " + str( switchSleep ) + |
| " seconds for switch down to be discovered" ) |
| time.sleep( switchSleep ) |
| device = main.ONOScli1.getDevice( dpid=switchDPID ) |
| # Peek at the deleted switch |
| main.log.warn( str( device ) ) |
| result = main.FALSE |
| if device and device[ 'available' ] is False: |
| result = main.TRUE |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="Kill switch successful", |
| onfail="Failed to kill switch?" ) |
| |
| def CASE12( self, main ): |
| """ |
| Switch Up |
| """ |
| # NOTE: You should probably run a topology check after this |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| assert ONOS1Port, "ONOS1Port not defined" |
| assert ONOS2Port, "ONOS2Port not defined" |
| assert ONOS3Port, "ONOS3Port not defined" |
| assert ONOS4Port, "ONOS4Port not defined" |
| assert ONOS5Port, "ONOS5Port not defined" |
| assert ONOS6Port, "ONOS6Port not defined" |
| assert ONOS7Port, "ONOS7Port not defined" |
| |
| switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| switch = main.params[ 'kill' ][ 'switch' ] |
| switchDPID = main.params[ 'kill' ][ 'dpid' ] |
| links = main.params[ 'kill' ][ 'links' ].split() |
| description = "Adding a switch to ensure it is discovered correctly" |
| main.case( description ) |
| |
| main.step( "Add back " + switch ) |
| main.Mininet1.addSwitch( switch, dpid=switchDPID ) |
| for peer in links: |
| main.Mininet1.addLink( switch, peer ) |
| ipList = [] |
| for i in range( main.numCtrls ): |
| ipList.append( main.nodes[ i ].ip_address ) |
| main.Mininet1.assignSwController( sw=switch, ip=ipList ) |
| main.log.info( "Waiting " + str( switchSleep ) + |
| " seconds for switch up to be discovered" ) |
| time.sleep( switchSleep ) |
| device = main.ONOScli1.getDevice( dpid=switchDPID ) |
| # Peek at the deleted switch |
| main.log.warn( str( device ) ) |
| result = main.FALSE |
| if device and device[ 'available' ]: |
| result = main.TRUE |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="add switch successful", |
| onfail="Failed to add switch?" ) |
| |
| def CASE13( self, main ): |
| """ |
| Clean up |
| """ |
| import os |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| |
| # printing colors to terminal |
| colors = { 'cyan': '\033[96m', 'purple': '\033[95m', |
| 'blue': '\033[94m', 'green': '\033[92m', |
| 'yellow': '\033[93m', 'red': '\033[91m', 'end': '\033[0m' } |
| main.case( "Test Cleanup" ) |
| main.step( "Killing tcpdumps" ) |
| main.Mininet2.stopTcpdump() |
| |
| testname = main.TEST |
| if main.params[ 'BACKUP' ][ 'ENABLED' ] == "True": |
| main.step( "Copying MN pcap and ONOS log files to test station" ) |
| teststationUser = main.params[ 'BACKUP' ][ 'TESTONUSER' ] |
| teststationIP = main.params[ 'BACKUP' ][ 'TESTONIP' ] |
| # NOTE: MN Pcap file is being saved to logdir. |
| # We scp this file as MN and TestON aren't necessarily the same vm |
| |
| # FIXME: To be replaced with a Jenkin's post script |
| # TODO: Load these from params |
| # NOTE: must end in / |
| logFolder = "/opt/onos/log/" |
| logFiles = [ "karaf.log", "karaf.log.1" ] |
| # NOTE: must end in / |
| for f in logFiles: |
| for node in main.nodes: |
| dstName = main.logdir + "/" + node.name + "-" + f |
| main.ONOSbench.secureCopy( node.user_name, node.ip_address, |
| logFolder + f, dstName ) |
| # std*.log's |
| # NOTE: must end in / |
| logFolder = "/opt/onos/var/" |
| logFiles = [ "stderr.log", "stdout.log" ] |
| # NOTE: must end in / |
| for f in logFiles: |
| for node in main.nodes: |
| dstName = main.logdir + "/" + node.name + "-" + f |
| main.ONOSbench.secureCopy( node.user_name, node.ip_address, |
| logFolder + f, dstName ) |
| else: |
| main.log.debug( "skipping saving log files" ) |
| |
| main.step( "Stopping Mininet" ) |
| mnResult = main.Mininet1.stopNet() |
| utilities.assert_equals( expect=main.TRUE, actual=mnResult, |
| onpass="Mininet stopped", |
| onfail="MN cleanup NOT successful" ) |
| |
| main.step( "Checking ONOS Logs for errors" ) |
| for node in main.nodes: |
| main.log.debug( "Checking logs for errors on " + node.name + ":" ) |
| main.log.warn( main.ONOSbench.checkLogs( node.ip_address ) ) |
| |
| try: |
| timerLog = open( main.logdir + "/Timers.csv", 'w') |
| # Overwrite with empty line and close |
| labels = "Gossip Intents" |
| data = str( gossipTime ) |
| timerLog.write( labels + "\n" + data ) |
| timerLog.close() |
| except NameError, e: |
| main.log.exception(e) |
| |
| def CASE14( self, main ): |
| """ |
| start election app on all onos nodes |
| """ |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| |
| main.case("Start Leadership Election app") |
| main.step( "Install leadership election app" ) |
| appResult = main.ONOScli1.activateApp( "org.onosproject.election" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=appResult, |
| onpass="Election app installed", |
| onfail="Something went wrong with installing Leadership election" ) |
| |
| main.step( "Run for election on each node" ) |
| leaderResult = main.TRUE |
| leaders = [] |
| for cli in main.CLIs: |
| cli.electionTestRun() |
| for cli in main.CLIs: |
| leader = cli.electionTestLeader() |
| if leader is None or leader == main.FALSE: |
| main.log.error( cli.name + ": Leader for the election app " + |
| "should be an ONOS node, instead got '" + |
| str( leader ) + "'" ) |
| leaderResult = main.FALSE |
| leaders.append( leader ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=leaderResult, |
| onpass="Successfully ran for leadership", |
| onfail="Failed to run for leadership" ) |
| |
| main.step( "Check that each node shows the same leader" ) |
| sameLeader = main.TRUE |
| if len( set( leaders ) ) != 1: |
| sameLeader = main.FALSE |
| main.log.error( "Results of electionTestLeader is order of main.CLIs:" + |
| str( leaders ) ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=sameLeader, |
| onpass="Leadership is consistent for the election topic", |
| onfail="Nodes have different leaders" ) |
| |
| def CASE15( self, main ): |
| """ |
| Check that Leadership Election is still functional |
| 15.1 Run election on each node |
| 15.2 Check that each node has the same leaders and candidates |
| 15.3 Find current leader and withdraw |
| 15.4 Check that a new node was elected leader |
| 15.5 Check that that new leader was the candidate of old leader |
| 15.6 Run for election on old leader |
| 15.7 Check that oldLeader is a candidate, and leader if only 1 node |
| 15.8 Make sure that the old leader was added to the candidate list |
| |
| old and new variable prefixes refer to data from before vs after |
| withdrawl and later before withdrawl vs after re-election |
| """ |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| |
| description = "Check that Leadership Election App is still functional" |
| main.case( description ) |
| # NOTE: Need to re-run since being a canidate is not persistant |
| # TODO: add check for "Command not found:" in the driver, this |
| # means the election test app isn't loaded |
| |
| oldLeaders = [] # leaders by node before withdrawl from candidates |
| newLeaders = [] # leaders by node after withdrawl from candidates |
| oldAllCandidates = [] # list of lists of each nodes' candidates before |
| newAllCandidates = [] # list of lists of each nodes' candidates after |
| oldCandidates = [] # list of candidates from node 0 before withdrawl |
| newCandidates = [] # list of candidates from node 0 after withdrawl |
| oldLeader = '' # the old leader from oldLeaders, None if not same |
| newLeader = '' # the new leaders fron newLoeaders, None if not same |
| oldLeaderCLI = None # the CLI of the old leader used for re-electing |
| expectNoLeader = False # True when there is only one leader |
| if main.numCtrls == 1: |
| expectNoLeader = True |
| |
| main.step( "Run for election on each node" ) |
| electionResult = main.TRUE |
| |
| for cli in main.CLIs: # run test election on each node |
| if cli.electionTestRun() == main.FALSE: |
| electionResult = main.FALSE |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=electionResult, |
| onpass="All nodes successfully ran for leadership", |
| onfail="At least one node failed to run for leadership" ) |
| |
| if electionResult == main.FALSE: |
| main.log.error( |
| "Skipping Test Case because Election Test isn't loaded" ) |
| main.skipCase() |
| |
| main.step( "Check that each node shows the same leader and candidates" ) |
| sameResult = main.TRUE |
| failMessage = "Nodes have different leaders" |
| for cli in main.CLIs: |
| node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| oldAllCandidates.append( node ) |
| oldLeaders.append( node[ 0 ] ) |
| oldCandidates = oldAllCandidates[ 0 ] |
| |
| # Check that each node has the same leader. Defines oldLeader |
| if len( set( oldLeaders ) ) != 1: |
| sameResult = main.FALSE |
| main.log.error( "More than one leader present:" + str( oldLeaders ) ) |
| oldLeader = None |
| else: |
| oldLeader = oldLeaders[ 0 ] |
| |
| # Check that each node's candidate list is the same |
| candidateDiscrepancy = False # Boolean of candidate mismatches |
| for candidates in oldAllCandidates: |
| if set( candidates ) != set( oldCandidates ): |
| sameResult = main.FALSE |
| candidateDiscrepancy = True |
| |
| if candidateDiscrepancy: |
| failMessage += " and candidates" |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=sameResult, |
| onpass="Leadership is consistent for the election topic", |
| onfail=failMessage ) |
| |
| main.step( "Find current leader and withdraw" ) |
| withdrawResult = main.TRUE |
| # do some sanity checking on leader before using it |
| if oldLeader is None: |
| main.log.error( "Leadership isn't consistent." ) |
| withdrawResult = main.FALSE |
| # Get the CLI of the oldLeader |
| for i in range( len( main.CLIs ) ): |
| if oldLeader == main.nodes[ i ].ip_address: |
| oldLeaderCLI = main.CLIs[ i ] |
| break |
| else: # FOR/ELSE statement |
| main.log.error( "Leader election, could not find current leader" ) |
| if oldLeader: |
| withdrawResult = oldLeaderCLI.electionTestWithdraw() |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=withdrawResult, |
| onpass="Node was withdrawn from election", |
| onfail="Node was not withdrawn from election" ) |
| |
| main.step( "Check that a new node was elected leader" ) |
| |
| # FIXME: use threads |
| newLeaderResult = main.TRUE |
| failMessage = "Nodes have different leaders" |
| |
| # Get new leaders and candidates |
| for cli in main.CLIs: |
| node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| # elections might no have finished yet |
| if node[ 0 ] == 'none' and not expectNoLeader: |
| main.log.info( "Node has no leader, waiting 5 seconds to be " + |
| "sure elections are complete." ) |
| time.sleep(5) |
| node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| # election still isn't done or there is a problem |
| if node[ 0 ] == 'none': |
| main.log.error( "No leader was elected on at least 1 node" ) |
| newLeaderResult = main.FALSE |
| newAllCandidates.append( node ) |
| newLeaders.append( node[ 0 ] ) |
| newCandidates = newAllCandidates[ 0 ] |
| |
| # Check that each node has the same leader. Defines newLeader |
| if len( set( newLeaders ) ) != 1: |
| newLeaderResult = main.FALSE |
| main.log.error( "Nodes have different leaders: " + |
| str( newLeaders ) ) |
| newLeader = None |
| else: |
| newLeader = newLeaders[ 0 ] |
| |
| # Check that each node's candidate list is the same |
| for candidates in newAllCandidates: |
| if set( candidates ) != set( newCandidates ): |
| newLeaderResult = main.FALSE |
| main.log.error( "Discrepancy in candidate lists detected" ) |
| |
| # Check that the new leader is not the older leader, which was withdrawn |
| if newLeader == oldLeader: |
| newLeaderResult = main.FALSE |
| main.log.error( "All nodes still see old leader: " + oldLeader + |
| " as the current leader" ) |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=newLeaderResult, |
| onpass="Leadership election passed", |
| onfail="Something went wrong with Leadership election" ) |
| |
| main.step( "Check that that new leader was the candidate of old leader") |
| # candidates[ 2 ] should be come the top candidate after withdrawl |
| correctCandidateResult = main.TRUE |
| if expectNoLeader: |
| if newLeader == 'none': |
| main.log.info( "No leader expected. None found. Pass" ) |
| correctCandidateResult = main.TRUE |
| else: |
| main.log.info( "Expected no leader, got: " + str( newLeader ) ) |
| correctCandidateResult = main.FALSE |
| elif newLeader != oldCandidates[ 2 ]: |
| correctCandidateResult = main.FALSE |
| main.log.error( "Candidate " + newLeader + " was elected. " + |
| oldCandidates[ 2 ] + " should have had priority." ) |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=correctCandidateResult, |
| onpass="Correct Candidate Elected", |
| onfail="Incorrect Candidate Elected" ) |
| |
| main.step( "Run for election on old leader( just so everyone " + |
| "is in the hat )" ) |
| if oldLeaderCLI is not None: |
| runResult = oldLeaderCLI.electionTestRun() |
| else: |
| main.log.error( "No old leader to re-elect" ) |
| runResult = main.FALSE |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=runResult, |
| onpass="App re-ran for election", |
| onfail="App failed to run for election" ) |
| main.step( |
| "Check that oldLeader is a candidate, and leader if only 1 node" ) |
| # verify leader didn't just change |
| positionResult = main.TRUE |
| # Get new leaders and candidates, wait if oldLeader is not a candidate yet |
| |
| # Reset and reuse the new candidate and leaders lists |
| newAllCandidates = [] |
| newCandidates = [] |
| newLeaders = [] |
| for cli in main.CLIs: |
| node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| if oldLeader not in node: # election might no have finished yet |
| main.log.info( "Old Leader not elected, waiting 5 seconds to " + |
| "be sure elections are complete" ) |
| time.sleep(5) |
| node = cli.specificLeaderCandidate( 'org.onosproject.election' ) |
| if oldLeader not in node: # election still isn't done, errors |
| main.log.error( |
| "Old leader was not elected on at least one node" ) |
| positionResult = main.FALSE |
| newAllCandidates.append( node ) |
| newLeaders.append( node[ 0 ] ) |
| newCandidates = newAllCandidates[ 0 ] |
| |
| # Check that each node has the same leader. Defines newLeader |
| if len( set( newLeaders ) ) != 1: |
| positionResult = main.FALSE |
| main.log.error( "Nodes have different leaders: " + |
| str( newLeaders ) ) |
| newLeader = None |
| else: |
| newLeader = newLeaders[ 0 ] |
| |
| # Check that each node's candidate list is the same |
| for candidates in newAllCandidates: |
| if set( candidates ) != set( newCandidates ): |
| newLeaderResult = main.FALSE |
| main.log.error( "Discrepancy in candidate lists detected" ) |
| |
| # Check that the re-elected node is last on the candidate List |
| if oldLeader != newCandidates[ -1 ]: |
| main.log.error( "Old Leader (" + oldLeader + ") not in the proper position " + |
| str( newCandidates ) ) |
| positionResult = main.FALSE |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=positionResult, |
| onpass="Old leader successfully re-ran for election", |
| onfail="Something went wrong with Leadership election after " + |
| "the old leader re-ran for election" ) |
| |
| def CASE16( self, main ): |
| """ |
| Install Distributed Primitives app |
| """ |
| import time |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| |
| # Variables for the distributed primitives tests |
| global pCounterName |
| global iCounterName |
| global pCounterValue |
| global iCounterValue |
| global onosSet |
| global onosSetName |
| pCounterName = "TestON-Partitions" |
| iCounterName = "TestON-inMemory" |
| pCounterValue = 0 |
| iCounterValue = 0 |
| onosSet = set([]) |
| onosSetName = "TestON-set" |
| |
| description = "Install Primitives app" |
| main.case( description ) |
| main.step( "Install Primitives app" ) |
| appName = "org.onosproject.distributedprimitives" |
| appResults = main.CLIs[0].activateApp( appName ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=appResults, |
| onpass="Primitives app activated", |
| onfail="Primitives app not activated" ) |
| time.sleep( 5 ) # To allow all nodes to activate |
| |
| def CASE17( self, main ): |
| """ |
| Check for basic functionality with distributed primitives |
| """ |
| # Make sure variables are defined/set |
| assert main.numCtrls, "main.numCtrls not defined" |
| assert main, "main not defined" |
| assert utilities.assert_equals, "utilities.assert_equals not defined" |
| assert main.CLIs, "main.CLIs not defined" |
| assert main.nodes, "main.nodes not defined" |
| assert pCounterName, "pCounterName not defined" |
| assert iCounterName, "iCounterName not defined" |
| assert onosSetName, "onosSetName not defined" |
| # NOTE: assert fails if value is 0/None/Empty/False |
| try: |
| pCounterValue |
| except NameError: |
| main.log.error( "pCounterValue not defined, setting to 0" ) |
| pCounterValue = 0 |
| try: |
| iCounterValue |
| except NameError: |
| main.log.error( "iCounterValue not defined, setting to 0" ) |
| iCounterValue = 0 |
| try: |
| onosSet |
| except NameError: |
| main.log.error( "onosSet not defined, setting to empty Set" ) |
| onosSet = set([]) |
| # Variables for the distributed primitives tests. These are local only |
| addValue = "a" |
| addAllValue = "a b c d e f" |
| retainValue = "c d e f" |
| |
| description = "Check for basic functionality with distributed " +\ |
| "primitives" |
| main.case( description ) |
| main.caseExplanation = "Test the methods of the distributed " +\ |
| "primitives (counters and sets) throught the cli" |
| # DISTRIBUTED ATOMIC COUNTERS |
| # Partitioned counters |
| main.step( "Increment then get a default counter on each node" ) |
| pCounters = [] |
| threads = [] |
| addedPValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| name="counterAddAndGet-" + str( i ), |
| args=[ pCounterName ] ) |
| pCounterValue += 1 |
| addedPValues.append( pCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| pCounters.append( t.result ) |
| # Check that counter incremented numController times |
| pCounterResults = True |
| for i in addedPValues: |
| tmpResult = i in pCounters |
| pCounterResults = pCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in partitioned " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="Default counter incremented", |
| onfail="Error incrementing default" + |
| " counter" ) |
| |
| main.step( "Get then Increment a default counter on each node" ) |
| pCounters = [] |
| threads = [] |
| addedPValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| name="counterGetAndAdd-" + str( i ), |
| args=[ pCounterName ] ) |
| addedPValues.append( pCounterValue ) |
| pCounterValue += 1 |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| pCounters.append( t.result ) |
| # Check that counter incremented numController times |
| pCounterResults = True |
| for i in addedPValues: |
| tmpResult = i in pCounters |
| pCounterResults = pCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in partitioned " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="Default counter incremented", |
| onfail="Error incrementing default" + |
| " counter" ) |
| |
| main.step( "Counters we added have the correct values" ) |
| incrementCheck = main.Counters.counterCheck( pCounterName, pCounterValue ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=incrementCheck, |
| onpass="Added counters are correct", |
| onfail="Added counters are incorrect" ) |
| |
| main.step( "Add -8 to then get a default counter on each node" ) |
| pCounters = [] |
| threads = [] |
| addedPValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| name="counterIncrement-" + str( i ), |
| args=[ pCounterName ], |
| kwargs={ "delta": -8 } ) |
| pCounterValue += -8 |
| addedPValues.append( pCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| pCounters.append( t.result ) |
| # Check that counter incremented numController times |
| pCounterResults = True |
| for i in addedPValues: |
| tmpResult = i in pCounters |
| pCounterResults = pCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in partitioned " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="Default counter incremented", |
| onfail="Error incrementing default" + |
| " counter" ) |
| |
| main.step( "Add 5 to then get a default counter on each node" ) |
| pCounters = [] |
| threads = [] |
| addedPValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| name="counterIncrement-" + str( i ), |
| args=[ pCounterName ], |
| kwargs={ "delta": 5 } ) |
| pCounterValue += 5 |
| addedPValues.append( pCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| pCounters.append( t.result ) |
| # Check that counter incremented numController times |
| pCounterResults = True |
| for i in addedPValues: |
| tmpResult = i in pCounters |
| pCounterResults = pCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in partitioned " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="Default counter incremented", |
| onfail="Error incrementing default" + |
| " counter" ) |
| |
| main.step( "Get then add 5 to a default counter on each node" ) |
| pCounters = [] |
| threads = [] |
| addedPValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| name="counterIncrement-" + str( i ), |
| args=[ pCounterName ], |
| kwargs={ "delta": 5 } ) |
| addedPValues.append( pCounterValue ) |
| pCounterValue += 5 |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| pCounters.append( t.result ) |
| # Check that counter incremented numController times |
| pCounterResults = True |
| for i in addedPValues: |
| tmpResult = i in pCounters |
| pCounterResults = pCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in partitioned " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="Default counter incremented", |
| onfail="Error incrementing default" + |
| " counter" ) |
| |
| main.step( "Counters we added have the correct values" ) |
| incrementCheck = main.Counters.counterCheck( pCounterName, pCounterValue ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=incrementCheck, |
| onpass="Added counters are correct", |
| onfail="Added counters are incorrect" ) |
| |
| # In-Memory counters |
| main.step( "Increment and get an in-memory counter on each node" ) |
| iCounters = [] |
| addedIValues = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| name="icounterIncrement-" + str( i ), |
| args=[ iCounterName ], |
| kwargs={ "inMemory": True } ) |
| iCounterValue += 1 |
| addedIValues.append( iCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| iCounters.append( t.result ) |
| # Check that counter incremented numController times |
| iCounterResults = True |
| for i in addedIValues: |
| tmpResult = i in iCounters |
| iCounterResults = iCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in the in-memory " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=iCounterResults, |
| onpass="In-memory counter incremented", |
| onfail="Error incrementing in-memory" + |
| " counter" ) |
| |
| main.step( "Get then Increment a in-memory counter on each node" ) |
| iCounters = [] |
| threads = [] |
| addedIValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| name="counterGetAndAdd-" + str( i ), |
| args=[ iCounterName ], |
| kwargs={ "inMemory": True } ) |
| addedIValues.append( iCounterValue ) |
| iCounterValue += 1 |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| iCounters.append( t.result ) |
| # Check that counter incremented numController times |
| iCounterResults = True |
| for i in addedIValues: |
| tmpResult = i in iCounters |
| iCounterResults = iCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in in-memory " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=iCounterResults, |
| onpass="In-memory counter incremented", |
| onfail="Error incrementing in-memory" + |
| " counter" ) |
| |
| main.step( "Counters we added have the correct values" ) |
| incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=incrementCheck, |
| onpass="Added counters are correct", |
| onfail="Added counters are incorrect" ) |
| |
| main.step( "Add -8 to then get a in-memory counter on each node" ) |
| iCounters = [] |
| threads = [] |
| addedIValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| name="counterIncrement-" + str( i ), |
| args=[ iCounterName ], |
| kwargs={ "delta": -8, "inMemory": True } ) |
| iCounterValue += -8 |
| addedIValues.append( iCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| iCounters.append( t.result ) |
| # Check that counter incremented numController times |
| iCounterResults = True |
| for i in addedIValues: |
| tmpResult = i in iCounters |
| iCounterResults = iCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in in-memory " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="In-memory counter incremented", |
| onfail="Error incrementing in-memory" + |
| " counter" ) |
| |
| main.step( "Add 5 to then get a in-memory counter on each node" ) |
| iCounters = [] |
| threads = [] |
| addedIValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestAddAndGet, |
| name="counterIncrement-" + str( i ), |
| args=[ iCounterName ], |
| kwargs={ "delta": 5, "inMemory": True } ) |
| iCounterValue += 5 |
| addedIValues.append( iCounterValue ) |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| iCounters.append( t.result ) |
| # Check that counter incremented numController times |
| iCounterResults = True |
| for i in addedIValues: |
| tmpResult = i in iCounters |
| iCounterResults = iCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in in-memory " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=pCounterResults, |
| onpass="In-memory counter incremented", |
| onfail="Error incrementing in-memory" + |
| " counter" ) |
| |
| main.step( "Get then add 5 to a in-memory counter on each node" ) |
| iCounters = [] |
| threads = [] |
| addedIValues = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd, |
| name="counterIncrement-" + str( i ), |
| args=[ iCounterName ], |
| kwargs={ "delta": 5, "inMemory": True } ) |
| addedIValues.append( iCounterValue ) |
| iCounterValue += 5 |
| threads.append( t ) |
| t.start() |
| |
| for t in threads: |
| t.join() |
| iCounters.append( t.result ) |
| # Check that counter incremented numController times |
| iCounterResults = True |
| for i in addedIValues: |
| tmpResult = i in iCounters |
| iCounterResults = iCounterResults and tmpResult |
| if not tmpResult: |
| main.log.error( str( i ) + " is not in in-memory " |
| "counter incremented results" ) |
| utilities.assert_equals( expect=True, |
| actual=iCounterResults, |
| onpass="In-memory counter incremented", |
| onfail="Error incrementing in-memory" + |
| " counter" ) |
| |
| main.step( "Counters we added have the correct values" ) |
| incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=incrementCheck, |
| onpass="Added counters are correct", |
| onfail="Added counters are incorrect" ) |
| |
| main.step( "Check counters are consistant across nodes" ) |
| onosCounters, consistentCounterResults = main.Counters.consistentCheck() |
| utilities.assert_equals( expect=main.TRUE, |
| actual=consistentCounterResults, |
| onpass="ONOS counters are consistent " + |
| "across nodes", |
| onfail="ONOS Counters are inconsistent " + |
| "across nodes" ) |
| |
| main.step( "Counters we added have the correct values" ) |
| incrementCheck = main.Counters.counterCheck( iCounterName, iCounterValue ) |
| incrementCheck = incrementCheck and \ |
| main.Counters.counterCheck( iCounterName, iCounterValue ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=incrementCheck, |
| onpass="Added counters are correct", |
| onfail="Added counters are incorrect" ) |
| # DISTRIBUTED SETS |
| main.step( "Distributed Set get" ) |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| utilities.assert_equals( expect=main.TRUE, |
| actual=getResults, |
| onpass="Set elements are correct", |
| onfail="Set elements are incorrect" ) |
| |
| main.step( "Distributed Set size" ) |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| utilities.assert_equals( expect=main.TRUE, |
| actual=sizeResults, |
| onpass="Set sizes are correct", |
| onfail="Set sizes are incorrect" ) |
| |
| main.step( "Distributed Set add()" ) |
| onosSet.add( addValue ) |
| addResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestAdd, |
| name="setTestAdd-" + str( i ), |
| args=[ onosSetName, addValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addResults = main.FALSE |
| else: |
| # unexpected result |
| addResults = main.FALSE |
| if addResults != main.TRUE: |
| main.log.error( "Error executing set add" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addResults = addResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addResults, |
| onpass="Set add correct", |
| onfail="Set add was incorrect" ) |
| |
| main.step( "Distributed Set addAll()" ) |
| onosSet.update( addAllValue.split() ) |
| addResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestAdd, |
| name="setTestAddAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addAllResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addAllResults = main.FALSE |
| else: |
| # unexpected result |
| addAllResults = main.FALSE |
| if addAllResults != main.TRUE: |
| main.log.error( "Error executing set addAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addAllResults = addAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addAllResults, |
| onpass="Set addAll correct", |
| onfail="Set addAll was incorrect" ) |
| |
| main.step( "Distributed Set contains()" ) |
| containsResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setContains-" + str( i ), |
| args=[ onosSetName ], |
| kwargs={ "values": addValue } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| # NOTE: This is the tuple |
| containsResponses.append( t.result ) |
| |
| containsResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if containsResponses[ i ] == main.ERROR: |
| containsResults = main.FALSE |
| else: |
| containsResults = containsResults and\ |
| containsResponses[ i ][ 1 ] |
| utilities.assert_equals( expect=main.TRUE, |
| actual=containsResults, |
| onpass="Set contains is functional", |
| onfail="Set contains failed" ) |
| |
| main.step( "Distributed Set containsAll()" ) |
| containsAllResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setContainsAll-" + str( i ), |
| args=[ onosSetName ], |
| kwargs={ "values": addAllValue } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| # NOTE: This is the tuple |
| containsAllResponses.append( t.result ) |
| |
| containsAllResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if containsResponses[ i ] == main.ERROR: |
| containsResults = main.FALSE |
| else: |
| containsResults = containsResults and\ |
| containsResponses[ i ][ 1 ] |
| utilities.assert_equals( expect=main.TRUE, |
| actual=containsAllResults, |
| onpass="Set containsAll is functional", |
| onfail="Set containsAll failed" ) |
| |
| main.step( "Distributed Set remove()" ) |
| onosSet.remove( addValue ) |
| removeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestRemove, |
| name="setTestRemove-" + str( i ), |
| args=[ onosSetName, addValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| removeResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| removeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if removeResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif removeResponses[ i ] == main.FALSE: |
| # not in set, probably fine |
| pass |
| elif removeResponses[ i ] == main.ERROR: |
| # Error in execution |
| removeResults = main.FALSE |
| else: |
| # unexpected result |
| removeResults = main.FALSE |
| if removeResults != main.TRUE: |
| main.log.error( "Error executing set remove" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| removeResults = removeResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=removeResults, |
| onpass="Set remove correct", |
| onfail="Set remove was incorrect" ) |
| |
| main.step( "Distributed Set removeAll()" ) |
| onosSet.difference_update( addAllValue.split() ) |
| removeAllResponses = [] |
| threads = [] |
| try: |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestRemove, |
| name="setTestRemoveAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| removeAllResponses.append( t.result ) |
| except Exception, e: |
| main.log.exception(e) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| removeAllResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if removeAllResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif removeAllResponses[ i ] == main.FALSE: |
| # not in set, probably fine |
| pass |
| elif removeAllResponses[ i ] == main.ERROR: |
| # Error in execution |
| removeAllResults = main.FALSE |
| else: |
| # unexpected result |
| removeAllResults = main.FALSE |
| if removeAllResults != main.TRUE: |
| main.log.error( "Error executing set removeAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| removeAllResults = removeAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=removeAllResults, |
| onpass="Set removeAll correct", |
| onfail="Set removeAll was incorrect" ) |
| |
| main.step( "Distributed Set addAll()" ) |
| onosSet.update( addAllValue.split() ) |
| addResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestAdd, |
| name="setTestAddAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addAllResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addAllResults = main.FALSE |
| else: |
| # unexpected result |
| addAllResults = main.FALSE |
| if addAllResults != main.TRUE: |
| main.log.error( "Error executing set addAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addAllResults = addAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addAllResults, |
| onpass="Set addAll correct", |
| onfail="Set addAll was incorrect" ) |
| |
| main.step( "Distributed Set clear()" ) |
| onosSet.clear() |
| clearResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestRemove, |
| name="setTestClear-" + str( i ), |
| args=[ onosSetName, " "], # Values doesn't matter |
| kwargs={ "clear": True } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| clearResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| clearResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if clearResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif clearResponses[ i ] == main.FALSE: |
| # Nothing set, probably fine |
| pass |
| elif clearResponses[ i ] == main.ERROR: |
| # Error in execution |
| clearResults = main.FALSE |
| else: |
| # unexpected result |
| clearResults = main.FALSE |
| if clearResults != main.TRUE: |
| main.log.error( "Error executing set clear" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| clearResults = clearResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=clearResults, |
| onpass="Set clear correct", |
| onfail="Set clear was incorrect" ) |
| |
| main.step( "Distributed Set addAll()" ) |
| onosSet.update( addAllValue.split() ) |
| addResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestAdd, |
| name="setTestAddAll-" + str( i ), |
| args=[ onosSetName, addAllValue ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| addResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| addAllResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if addResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif addResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif addResponses[ i ] == main.ERROR: |
| # Error in execution |
| addAllResults = main.FALSE |
| else: |
| # unexpected result |
| addAllResults = main.FALSE |
| if addAllResults != main.TRUE: |
| main.log.error( "Error executing set addAll" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + str( size ) + |
| " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| addAllResults = addAllResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=addAllResults, |
| onpass="Set addAll correct", |
| onfail="Set addAll was incorrect" ) |
| |
| main.step( "Distributed Set retain()" ) |
| onosSet.intersection_update( retainValue.split() ) |
| retainResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestRemove, |
| name="setTestRetain-" + str( i ), |
| args=[ onosSetName, retainValue ], |
| kwargs={ "retain": True } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| retainResponses.append( t.result ) |
| |
| # main.TRUE = successfully changed the set |
| # main.FALSE = action resulted in no change in set |
| # main.ERROR - Some error in executing the function |
| retainResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if retainResponses[ i ] == main.TRUE: |
| # All is well |
| pass |
| elif retainResponses[ i ] == main.FALSE: |
| # Already in set, probably fine |
| pass |
| elif retainResponses[ i ] == main.ERROR: |
| # Error in execution |
| retainResults = main.FALSE |
| else: |
| # unexpected result |
| retainResults = main.FALSE |
| if retainResults != main.TRUE: |
| main.log.error( "Error executing set retain" ) |
| |
| # Check if set is still correct |
| size = len( onosSet ) |
| getResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestGet, |
| name="setTestGet-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| getResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if isinstance( getResponses[ i ], list): |
| current = set( getResponses[ i ] ) |
| if len( current ) == len( getResponses[ i ] ): |
| # no repeats |
| if onosSet != current: |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has incorrect view" + |
| " of set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| main.log.debug( "Expected: " + str( onosSet ) ) |
| main.log.debug( "Actual: " + str( current ) ) |
| getResults = main.FALSE |
| else: |
| # error, set is not a set |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " has repeat elements in" + |
| " set " + onosSetName + ":\n" + |
| str( getResponses[ i ] ) ) |
| getResults = main.FALSE |
| elif getResponses[ i ] == main.ERROR: |
| getResults = main.FALSE |
| sizeResponses = [] |
| threads = [] |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].setTestSize, |
| name="setTestSize-" + str( i ), |
| args=[ onosSetName ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| sizeResponses.append( t.result ) |
| sizeResults = main.TRUE |
| for i in range( main.numCtrls ): |
| if size != sizeResponses[ i ]: |
| sizeResults = main.FALSE |
| main.log.error( "ONOS" + str( i + 1 ) + |
| " expected a size of " + |
| str( size ) + " for set " + onosSetName + |
| " but got " + str( sizeResponses[ i ] ) ) |
| retainResults = retainResults and getResults and sizeResults |
| utilities.assert_equals( expect=main.TRUE, |
| actual=retainResults, |
| onpass="Set retain correct", |
| onfail="Set retain was incorrect" ) |
| |
| # Transactional maps |
| main.step( "Partitioned Transactional maps put" ) |
| tMapValue = "Testing" |
| numKeys = 100 |
| putResult = True |
| putResponses = main.CLIs[ 0 ].transactionalMapPut( numKeys, tMapValue ) |
| if len( putResponses ) == 100: |
| for i in putResponses: |
| if putResponses[ i ][ 'value' ] != tMapValue: |
| putResult = False |
| else: |
| putResult = False |
| if not putResult: |
| main.log.debug( "Put response values: " + str( putResponses ) ) |
| utilities.assert_equals( expect=True, |
| actual=putResult, |
| onpass="Partitioned Transactional Map put successful", |
| onfail="Partitioned Transactional Map put values are incorrect" ) |
| |
| main.step( "Partitioned Transactional maps get" ) |
| getCheck = True |
| for n in range( 1, numKeys + 1 ): |
| getResponses = [] |
| threads = [] |
| valueCheck = True |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].transactionalMapGet, |
| name="TMap-get-" + str( i ), |
| args=[ "Key" + str ( n ) ] ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| for node in getResponses: |
| if node != tMapValue: |
| valueCheck = False |
| if not valueCheck: |
| main.log.warn( "Values for key 'Key" + str( n ) + "' do not match:" ) |
| main.log.warn( getResponses ) |
| getCheck = getCheck and valueCheck |
| utilities.assert_equals( expect=True, |
| actual=getCheck, |
| onpass="Partitioned Transactional Map get values were correct", |
| onfail="Partitioned Transactional Map values incorrect" ) |
| |
| main.step( "In-memory Transactional maps put" ) |
| tMapValue = "Testing" |
| numKeys = 100 |
| putResult = True |
| putResponses = main.CLIs[ 0 ].transactionalMapPut( numKeys, tMapValue, inMemory=True ) |
| if len( putResponses ) == 100: |
| for i in putResponses: |
| if putResponses[ i ][ 'value' ] != tMapValue: |
| putResult = False |
| else: |
| putResult = False |
| if not putResult: |
| main.log.debug( "Put response values: " + str( putResponses ) ) |
| utilities.assert_equals( expect=True, |
| actual=putResult, |
| onpass="In-Memory Transactional Map put successful", |
| onfail="In-Memory Transactional Map put values are incorrect" ) |
| |
| main.step( "In-Memory Transactional maps get" ) |
| getCheck = True |
| for n in range( 1, numKeys + 1 ): |
| getResponses = [] |
| threads = [] |
| valueCheck = True |
| for i in range( main.numCtrls ): |
| t = main.Thread( target=main.CLIs[i].transactionalMapGet, |
| name="TMap-get-" + str( i ), |
| args=[ "Key" + str ( n ) ], |
| kwargs={ "inMemory": True } ) |
| threads.append( t ) |
| t.start() |
| for t in threads: |
| t.join() |
| getResponses.append( t.result ) |
| for node in getResponses: |
| if node != tMapValue: |
| valueCheck = False |
| if not valueCheck: |
| main.log.warn( "Values for key 'Key" + str( n ) + "' do not match:" ) |
| main.log.warn( getResponses ) |
| getCheck = getCheck and valueCheck |
| utilities.assert_equals( expect=True, |
| actual=getCheck, |
| onpass="In-Memory Transactional Map get values were correct", |
| onfail="In-Memory Transactional Map values incorrect" ) |