blob: 590ff569358d6ba71261e73f6d18e3a6e5bd7a24 [file] [log] [blame]
"""
Description: This test is to determine if the HA test setup is
working correctly. There are no failures so this test should
have a 100% pass rate
List of test cases:
CASE1: Compile ONOS and push it to the test machines
CASE2: Assign mastership to controllers
CASE3: Assign intents
CASE4: Ping across added host intents
CASE5: Reading state of ONOS
CASE6: The Failure case. Since this is the Sanity test, we do nothing.
CASE7: Check state after control plane failure
CASE8: Compare topo
CASE9: Link s3-s28 down
CASE10: Link s3-s28 up
CASE11: Switch down
CASE12: Switch up
CASE13: Clean up
CASE14: start election app on all onos nodes
CASE15: Check that Leadership Election is still functional
"""
class HATestSanity:
def __init__( self ):
self.default = ''
def CASE1( self, main ):
"""
CASE1 is to compile ONOS and push it to the test machines
Startup sequence:
git pull
mvn clean install
onos-package
cell <name>
onos-verify-cell
NOTE: temporary - onos-remove-raft-logs
onos-install -f
onos-wait-for-start
"""
main.log.report( "ONOS HA Sanity test - initialization" )
main.case( "Setting up test environment" )
# TODO: save all the timers and output them for plotting
# load some vairables from the params file
PULLCODE = False
if main.params[ 'Git' ] == 'True':
PULLCODE = True
gitBranch = main.params[ 'branch' ]
cellName = main.params[ 'ENV' ][ 'cellName' ]
# set global variables
global ONOS1Ip
global ONOS1Port
global ONOS2Ip
global ONOS2Port
global ONOS3Ip
global ONOS3Port
global ONOS4Ip
global ONOS4Port
global ONOS5Ip
global ONOS5Port
global ONOS6Ip
global ONOS6Port
global ONOS7Ip
global ONOS7Port
global numControllers
ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ]
ONOS1Port = main.params[ 'CTRL' ][ 'port1' ]
ONOS2Ip = main.params[ 'CTRL' ][ 'ip2' ]
ONOS2Port = main.params[ 'CTRL' ][ 'port2' ]
ONOS3Ip = main.params[ 'CTRL' ][ 'ip3' ]
ONOS3Port = main.params[ 'CTRL' ][ 'port3' ]
ONOS4Ip = main.params[ 'CTRL' ][ 'ip4' ]
ONOS4Port = main.params[ 'CTRL' ][ 'port4' ]
ONOS5Ip = main.params[ 'CTRL' ][ 'ip5' ]
ONOS5Port = main.params[ 'CTRL' ][ 'port5' ]
ONOS6Ip = main.params[ 'CTRL' ][ 'ip6' ]
ONOS6Port = main.params[ 'CTRL' ][ 'port6' ]
ONOS7Ip = main.params[ 'CTRL' ][ 'ip7' ]
ONOS7Port = main.params[ 'CTRL' ][ 'port7' ]
numControllers = int( main.params[ 'num_controllers' ] )
main.step( "Applying cell variable to environment" )
cellResult = main.ONOSbench.setCell( cellName )
verifyResult = main.ONOSbench.verifyCell()
# FIXME:this is short term fix
main.log.report( "Removing raft logs" )
main.ONOSbench.onosRemoveRaftLogs()
main.log.report( "Uninstalling ONOS" )
main.ONOSbench.onosUninstall( ONOS1Ip )
main.ONOSbench.onosUninstall( ONOS2Ip )
main.ONOSbench.onosUninstall( ONOS3Ip )
main.ONOSbench.onosUninstall( ONOS4Ip )
main.ONOSbench.onosUninstall( ONOS5Ip )
main.ONOSbench.onosUninstall( ONOS6Ip )
main.ONOSbench.onosUninstall( ONOS7Ip )
cleanInstallResult = main.TRUE
gitPullResult = main.TRUE
main.step( "Starting Mininet" )
main.Mininet1.startNet( )
main.step( "Compiling the latest version of ONOS" )
if PULLCODE:
# TODO Configure branch in params
main.step( "Git checkout and pull master" )
main.ONOSbench.gitCheckout( gitBranch )
gitPullResult = main.ONOSbench.gitPull()
main.step( "Using mvn clean & install" )
cleanInstallResult = main.ONOSbench.cleanInstall()
else:
main.log.warn( "Did not pull new code so skipping mvn " +
"clean install" )
main.ONOSbench.getVersion( report=True )
main.step( "Creating ONOS package" )
packageResult = main.ONOSbench.onosPackage()
main.step( "Installing ONOS package" )
onos1InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS1Ip )
onos2InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS2Ip )
onos3InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS3Ip )
onos4InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS4Ip )
onos5InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS5Ip )
onos6InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS6Ip )
onos7InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS7Ip )
onosInstallResult = onos1InstallResult and onos2InstallResult\
and onos3InstallResult and onos4InstallResult\
and onos5InstallResult and onos6InstallResult\
and onos7InstallResult
main.step( "Checking if ONOS is up yet" )
# TODO check bundle:list?
for i in range( 2 ):
onos1Isup = main.ONOSbench.isup( ONOS1Ip )
if not onos1Isup:
main.log.report( "ONOS1 didn't start!" )
main.ONOSbench.onosStop( ONOS1Ip )
main.ONOSbench.onosStart( ONOS1Ip )
onos2Isup = main.ONOSbench.isup( ONOS2Ip )
if not onos2Isup:
main.log.report( "ONOS2 didn't start!" )
main.ONOSbench.onosStop( ONOS2Ip )
main.ONOSbench.onosStart( ONOS2Ip )
onos3Isup = main.ONOSbench.isup( ONOS3Ip )
if not onos3Isup:
main.log.report( "ONOS3 didn't start!" )
main.ONOSbench.onosStop( ONOS3Ip )
main.ONOSbench.onosStart( ONOS3Ip )
onos4Isup = main.ONOSbench.isup( ONOS4Ip )
if not onos4Isup:
main.log.report( "ONOS4 didn't start!" )
main.ONOSbench.onosStop( ONOS4Ip )
main.ONOSbench.onosStart( ONOS4Ip )
onos5Isup = main.ONOSbench.isup( ONOS5Ip )
if not onos5Isup:
main.log.report( "ONOS5 didn't start!" )
main.ONOSbench.onosStop( ONOS5Ip )
main.ONOSbench.onosStart( ONOS5Ip )
onos6Isup = main.ONOSbench.isup( ONOS6Ip )
if not onos6Isup:
main.log.report( "ONOS6 didn't start!" )
main.ONOSbench.onosStop( ONOS6Ip )
main.ONOSbench.onosStart( ONOS6Ip )
onos7Isup = main.ONOSbench.isup( ONOS7Ip )
if not onos7Isup:
main.log.report( "ONOS7 didn't start!" )
main.ONOSbench.onosStop( ONOS7Ip )
main.ONOSbench.onosStart( ONOS7Ip )
onosIsupResult = onos1Isup and onos2Isup and onos3Isup\
and onos4Isup and onos5Isup and onos6Isup and onos7Isup
if onosIsupResult == main.TRUE:
break
cliResult1 = main.ONOScli1.startOnosCli( ONOS1Ip )
cliResult2 = main.ONOScli2.startOnosCli( ONOS2Ip )
cliResult3 = main.ONOScli3.startOnosCli( ONOS3Ip )
cliResult4 = main.ONOScli4.startOnosCli( ONOS4Ip )
cliResult5 = main.ONOScli5.startOnosCli( ONOS5Ip )
cliResult6 = main.ONOScli6.startOnosCli( ONOS6Ip )
cliResult7 = main.ONOScli7.startOnosCli( ONOS7Ip )
cliResults = cliResult1 and cliResult2 and cliResult3 and\
cliResult4 and cliResult5 and cliResult6 and cliResult7
main.step( "Start Packet Capture MN" )
main.Mininet2.startTcpdump(
str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST )
+ "-MN.pcap",
intf=main.params[ 'MNtcpdump' ][ 'intf' ],
port=main.params[ 'MNtcpdump' ][ 'port' ] )
case1Result = ( cleanInstallResult and packageResult and
cellResult and verifyResult and onosInstallResult
and onosIsupResult and cliResults )
utilities.assert_equals( expect=main.TRUE, actual=case1Result,
onpass="Test startup successful",
onfail="Test startup NOT successful" )
if case1Result == main.FALSE:
main.cleanup()
main.exit()
def CASE2( self, main ):
"""
Assign mastership to controllers
"""
import re
main.log.report( "Assigning switches to controllers" )
main.case( "Assigning Controllers" )
main.step( "Assign switches to controllers" )
for i in range( 1, 29 ):
main.Mininet1.assignSwController(
sw=str( i ),
count=numControllers,
ip1=ONOS1Ip, port1=ONOS1Port,
ip2=ONOS2Ip, port2=ONOS2Port,
ip3=ONOS3Ip, port3=ONOS3Port,
ip4=ONOS4Ip, port4=ONOS4Port,
ip5=ONOS5Ip, port5=ONOS5Port,
ip6=ONOS6Ip, port6=ONOS6Port,
ip7=ONOS7Ip, port7=ONOS7Port )
mastershipCheck = main.TRUE
for i in range( 1, 29 ):
response = main.Mininet1.getSwController( "s" + str( i ) )
try:
main.log.info( str( response ) )
except:
main.log.info( repr( response ) )
if re.search( "tcp:" + ONOS1Ip, response )\
and re.search( "tcp:" + ONOS2Ip, response )\
and re.search( "tcp:" + ONOS3Ip, response )\
and re.search( "tcp:" + ONOS4Ip, response )\
and re.search( "tcp:" + ONOS5Ip, response )\
and re.search( "tcp:" + ONOS6Ip, response )\
and re.search( "tcp:" + ONOS7Ip, response ):
mastershipCheck = mastershipCheck and main.TRUE
else:
mastershipCheck = main.FALSE
if mastershipCheck == main.TRUE:
main.log.report( "Switch mastership assigned correctly" )
utilities.assert_equals(
expect=main.TRUE,
actual=mastershipCheck,
onpass="Switch mastership assigned correctly",
onfail="Switches not assigned correctly to controllers" )
# Manually assign mastership to the controller we want
roleCall = main.TRUE
roleCheck = main.TRUE
# Assign switch
deviceId = main.ONOScli1.getDevice( "1000" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS1Ip )
# Check assignment
if ONOS1Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
# Assign switch
deviceId = main.ONOScli1.getDevice( "2800" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS1Ip )
# Check assignment
if ONOS1Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
# Assign switch
deviceId = main.ONOScli1.getDevice( "2000" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS2Ip )
# Check assignment
if ONOS2Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
# Assign switch
deviceId = main.ONOScli1.getDevice( "3000" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS2Ip )
# Check assignment
if ONOS2Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
# Assign switch
deviceId = main.ONOScli1.getDevice( "5000" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS3Ip )
# Check assignment
if ONOS3Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
# Assign switch
deviceId = main.ONOScli1.getDevice( "6000" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS3Ip )
# Check assignment
if ONOS3Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
# Assign switch
deviceId = main.ONOScli1.getDevice( "3004" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS4Ip )
# Check assignment
if ONOS4Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
for i in range( 8, 18 ):
dpid = '3' + str( i ).zfill( 3 )
deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS5Ip )
# Check assignment
if ONOS5Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
deviceId = main.ONOScli1.getDevice( "6007" ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS6Ip )
# Check assignment
if ONOS6Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
for i in range( 18, 28 ):
dpid = '6' + str( i ).zfill( 3 )
deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
roleCall = roleCall and main.ONOScli1.deviceRole(
deviceId,
ONOS7Ip )
# Check assignment
if ONOS7Ip in main.ONOScli1.getRole( deviceId ).get( 'master' ):
roleCheck = roleCheck and main.TRUE
else:
roleCheck = roleCheck and main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=roleCall,
onpass="Re-assigned switch mastership to designated controller",
onfail="Something wrong with deviceRole calls" )
utilities.assert_equals(
expect=main.TRUE,
actual=roleCheck,
onpass="Switches were successfully reassigned to designated " +
"controller",
onfail="Switches were not successfully reassigned" )
mastershipCheck = mastershipCheck and roleCall and roleCheck
utilities.assert_equals( expect=main.TRUE, actual=mastershipCheck,
onpass="Switch mastership correctly assigned",
onfail="Error in (re)assigning switch" +
" mastership" )
def CASE3( self, main ):
"""
Assign intents
"""
import time
main.log.report( "Adding host intents" )
main.case( "Adding host Intents" )
main.step( "Discovering Hosts( Via pingall for now )" )
# FIXME: Once we have a host discovery mechanism, use that instead
# install onos-app-fwd
main.log.info( "Install reactive forwarding app" )
main.ONOScli1.featureInstall( "onos-app-fwd" )
main.ONOScli2.featureInstall( "onos-app-fwd" )
main.ONOScli3.featureInstall( "onos-app-fwd" )
main.ONOScli4.featureInstall( "onos-app-fwd" )
main.ONOScli5.featureInstall( "onos-app-fwd" )
main.ONOScli6.featureInstall( "onos-app-fwd" )
main.ONOScli7.featureInstall( "onos-app-fwd" )
# REACTIVE FWD test
pingResult = main.FALSE
time1 = time.time()
pingResult = main.Mininet1.pingall()
utilities.assert_equals(
expect=main.TRUE,
actual=pingResult,
onpass="Reactive Pingall test passed",
onfail="Reactive Pingall failed, one or more ping pairs failed" )
time2 = time.time()
main.log.info( "Time for pingall: %2f seconds" % ( time2 - time1 ) )
# uninstall onos-app-fwd
main.log.info( "Uninstall reactive forwarding app" )
main.ONOScli1.featureUninstall( "onos-app-fwd" )
main.ONOScli2.featureUninstall( "onos-app-fwd" )
main.ONOScli3.featureUninstall( "onos-app-fwd" )
main.ONOScli4.featureUninstall( "onos-app-fwd" )
main.ONOScli5.featureUninstall( "onos-app-fwd" )
main.ONOScli6.featureUninstall( "onos-app-fwd" )
main.ONOScli7.featureUninstall( "onos-app-fwd" )
# timeout for fwd flows
time.sleep( 10 )
main.step( "Add host intents" )
# TODO: move the host numbers to params
intentAddResult = True
for i in range( 8, 18 ):
main.log.info( "Adding host intent between h" + str( i ) +
" and h" + str( i + 10 ) )
host1 = "00:00:00:00:00:" + \
str( hex( i )[ 2: ] ).zfill( 2 ).upper()
host2 = "00:00:00:00:00:" + \
str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
# NOTE: getHost can return None
host1Dict = main.ONOScli1.getHost( host1 )
host2Dict = main.ONOScli1.getHost( host2 )
host1Id = None
host2Id = None
if host1Dict and host2Dict:
host1Id = host1Dict.get( 'id', None )
host2Id = host2Dict.get( 'id', None )
if host1Id and host2Id:
# TODO: distribute the intents across onos nodes
tmpResult = main.ONOScli1.addHostIntent(
host1Id,
host2Id )
else:
main.log.error( "Error, getHost() failed" )
main.log.warn( json.dumps( json.loads( main.ONOScli1.hosts() ),
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
tmpResult = main.FALSE
intentAddResult = bool( pingResult and intentAddResult
and tmpResult )
# TODO Check that intents were added?
# Print the intent states
intents = main.ONOScli1.intents( )
intentStates = []
for intent in json.loads( intents ): # Iter through intents of a node
intentStates.append( intent.get( 'state', None ) )
out = [ (i, intentStates.count( i ) ) for i in set( intentStates ) ]
main.log.info( dict( out ) )
utilities.assert_equals(
expect=True,
actual=intentAddResult,
onpass="Pushed host intents to ONOS",
onfail="Error in pushing host intents to ONOS" )
# TODO Check if intents all exist in datastore
def CASE4( self, main ):
"""
Ping across added host intents
"""
description = " Ping across added host intents"
main.log.report( description )
main.case( description )
PingResult = main.TRUE
for i in range( 8, 18 ):
ping = main.Mininet1.pingHost(
src="h" + str( i ), target="h" + str( i + 10 ) )
PingResult = PingResult and ping
if ping == main.FALSE:
main.log.warn( "Ping failed between h" + str( i ) +
" and h" + str( i + 10 ) )
elif ping == main.TRUE:
main.log.info( "Ping test passed!" )
# Don't set PingResult or you'd override failures
if PingResult == main.FALSE:
main.log.report(
"Intents have not been installed correctly, pings failed." )
#TODO: pretty print
main.log.warn( "ONSO1 intents: " )
main.log.warn( json.dumps( json.loads( main.ONOScli1.intents() ),
sort_keys=True,
indent=4,
separators=( ',', ': ' ) ) )
if PingResult == main.TRUE:
main.log.report(
"Intents have been installed correctly and verified by pings" )
utilities.assert_equals(
expect=main.TRUE,
actual=PingResult,
onpass="Intents have been installed correctly and pings work",
onfail="Intents have not been installed correctly, pings failed." )
def CASE5( self, main ):
"""
Reading state of ONOS
"""
import json
# assumes that sts is already in you PYTHONPATH
from sts.topology.teston_topology import TestONTopology
main.log.report( "Setting up and gathering data for current state" )
main.case( "Setting up and gathering data for current state" )
# The general idea for this test case is to pull the state of
# ( intents,flows, topology,... ) from each ONOS node
# We can then compare them with eachother and also with past states
main.step( "Get the Mastership of each switch from each controller" )
global mastershipState
mastershipState = []
# Assert that each device has a master
ONOS1MasterNotNull = main.ONOScli1.rolesNotNull()
ONOS2MasterNotNull = main.ONOScli2.rolesNotNull()
ONOS3MasterNotNull = main.ONOScli3.rolesNotNull()
ONOS4MasterNotNull = main.ONOScli4.rolesNotNull()
ONOS5MasterNotNull = main.ONOScli5.rolesNotNull()
ONOS6MasterNotNull = main.ONOScli6.rolesNotNull()
ONOS7MasterNotNull = main.ONOScli7.rolesNotNull()
rolesNotNull = ONOS1MasterNotNull and ONOS2MasterNotNull and\
ONOS3MasterNotNull and ONOS4MasterNotNull and\
ONOS5MasterNotNull and ONOS6MasterNotNull and\
ONOS7MasterNotNull
utilities.assert_equals(
expect=main.TRUE,
actual=rolesNotNull,
onpass="Each device has a master",
onfail="Some devices don't have a master assigned" )
ONOS1Mastership = main.ONOScli1.roles()
ONOS2Mastership = main.ONOScli2.roles()
ONOS3Mastership = main.ONOScli3.roles()
ONOS4Mastership = main.ONOScli4.roles()
ONOS5Mastership = main.ONOScli5.roles()
ONOS6Mastership = main.ONOScli6.roles()
ONOS7Mastership = main.ONOScli7.roles()
if "Error" in ONOS1Mastership or not ONOS1Mastership\
or "Error" in ONOS2Mastership or not ONOS2Mastership\
or "Error" in ONOS3Mastership or not ONOS3Mastership\
or "Error" in ONOS4Mastership or not ONOS4Mastership\
or "Error" in ONOS5Mastership or not ONOS5Mastership\
or "Error" in ONOS6Mastership or not ONOS6Mastership\
or "Error" in ONOS7Mastership or not ONOS7Mastership:
main.log.report( "Error in getting ONOS roles" )
main.log.warn(
"ONOS1 mastership response: " +
repr( ONOS1Mastership ) )
main.log.warn(
"ONOS2 mastership response: " +
repr( ONOS2Mastership ) )
main.log.warn(
"ONOS3 mastership response: " +
repr( ONOS3Mastership ) )
main.log.warn(
"ONOS4 mastership response: " +
repr( ONOS4Mastership ) )
main.log.warn(
"ONOS5 mastership response: " +
repr( ONOS5Mastership ) )
main.log.warn(
"ONOS6 mastership response: " +
repr( ONOS6Mastership ) )
main.log.warn(
"ONOS7 mastership response: " +
repr( ONOS7Mastership ) )
consistentMastership = main.FALSE
elif ONOS1Mastership == ONOS2Mastership\
and ONOS1Mastership == ONOS3Mastership\
and ONOS1Mastership == ONOS4Mastership\
and ONOS1Mastership == ONOS5Mastership\
and ONOS1Mastership == ONOS6Mastership\
and ONOS1Mastership == ONOS7Mastership:
mastershipState = ONOS1Mastership
consistentMastership = main.TRUE
main.log.report(
"Switch roles are consistent across all ONOS nodes" )
else:
main.log.warn(
"ONOS1 roles: ",
json.dumps(
json.loads( ONOS1Mastership ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS2 roles: ",
json.dumps(
json.loads( ONOS2Mastership ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS3 roles: ",
json.dumps(
json.loads( ONOS3Mastership ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS4 roles: ",
json.dumps(
json.loads( ONOS4Mastership ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS5 roles: ",
json.dumps(
json.loads( ONOS5Mastership ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS6 roles: ",
json.dumps(
json.loads( ONOS6Mastership ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS7 roles: ",
json.dumps(
json.loads( ONOS7Mastership ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
consistentMastership = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=consistentMastership,
onpass="Switch roles are consistent across all ONOS nodes",
onfail="ONOS nodes have different views of switch roles" )
main.step( "Get the intents from each controller" )
global intentState
intentState = []
ONOS1Intents = main.ONOScli1.intents( jsonFormat=True )
ONOS2Intents = main.ONOScli2.intents( jsonFormat=True )
ONOS3Intents = main.ONOScli3.intents( jsonFormat=True )
ONOS4Intents = main.ONOScli4.intents( jsonFormat=True )
ONOS5Intents = main.ONOScli5.intents( jsonFormat=True )
ONOS6Intents = main.ONOScli6.intents( jsonFormat=True )
ONOS7Intents = main.ONOScli7.intents( jsonFormat=True )
intentCheck = main.FALSE
if "Error" in ONOS1Intents or not ONOS1Intents\
or "Error" in ONOS2Intents or not ONOS2Intents\
or "Error" in ONOS3Intents or not ONOS3Intents\
or "Error" in ONOS4Intents or not ONOS4Intents\
or "Error" in ONOS5Intents or not ONOS5Intents\
or "Error" in ONOS6Intents or not ONOS6Intents\
or "Error" in ONOS7Intents or not ONOS7Intents:
main.log.report( "Error in getting ONOS intents" )
main.log.warn( "ONOS1 intents response: " + repr( ONOS1Intents ) )
main.log.warn( "ONOS2 intents response: " + repr( ONOS2Intents ) )
main.log.warn( "ONOS3 intents response: " + repr( ONOS3Intents ) )
main.log.warn( "ONOS4 intents response: " + repr( ONOS4Intents ) )
main.log.warn( "ONOS5 intents response: " + repr( ONOS5Intents ) )
main.log.warn( "ONOS6 intents response: " + repr( ONOS6Intents ) )
main.log.warn( "ONOS7 intents response: " + repr( ONOS7Intents ) )
elif ONOS1Intents == ONOS2Intents\
and ONOS1Intents == ONOS3Intents\
and ONOS1Intents == ONOS4Intents\
and ONOS1Intents == ONOS5Intents\
and ONOS1Intents == ONOS6Intents\
and ONOS1Intents == ONOS7Intents:
intentState = ONOS1Intents
intentCheck = main.TRUE
main.log.report( "Intents are consistent across all ONOS nodes" )
else:
main.log.warn(
"ONOS1 intents: ",
json.dumps(
json.loads( ONOS1Intents ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS2 intents: ",
json.dumps(
json.loads( ONOS2Intents ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS3 intents: ",
json.dumps(
json.loads( ONOS3Intents ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS4 intents: ",
json.dumps(
json.loads( ONOS4Intents ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS5 intents: ",
json.dumps(
json.loads( ONOS5Intents ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS6 intents: ",
json.dumps(
json.loads( ONOS6Intents ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
main.log.warn(
"ONOS7 intents: ",
json.dumps(
json.loads( ONOS7Intents ),
sort_keys=True,
indent=4,
separators=(
',',
': ' ) ) )
utilities.assert_equals(
expect=main.TRUE,
actual=intentCheck,
onpass="Intents are consistent across all ONOS nodes",
onfail="ONOS nodes have different views of intents" )
main.step( "Get the flows from each controller" )
global flowState
flowState = []
ONOS1Flows = main.ONOScli1.flows( jsonFormat=True )
ONOS2Flows = main.ONOScli2.flows( jsonFormat=True )
ONOS3Flows = main.ONOScli3.flows( jsonFormat=True )
ONOS4Flows = main.ONOScli4.flows( jsonFormat=True )
ONOS5Flows = main.ONOScli5.flows( jsonFormat=True )
ONOS6Flows = main.ONOScli6.flows( jsonFormat=True )
ONOS7Flows = main.ONOScli7.flows( jsonFormat=True )
ONOS1FlowsJson = json.loads( ONOS1Flows )
ONOS2FlowsJson = json.loads( ONOS2Flows )
ONOS3FlowsJson = json.loads( ONOS3Flows )
ONOS4FlowsJson = json.loads( ONOS4Flows )
ONOS5FlowsJson = json.loads( ONOS5Flows )
ONOS6FlowsJson = json.loads( ONOS6Flows )
ONOS7FlowsJson = json.loads( ONOS7Flows )
flowCheck = main.FALSE
if "Error" in ONOS1Flows or not ONOS1Flows\
or "Error" in ONOS2Flows or not ONOS2Flows\
or "Error" in ONOS3Flows or not ONOS3Flows\
or "Error" in ONOS4Flows or not ONOS4Flows\
or "Error" in ONOS5Flows or not ONOS5Flows\
or "Error" in ONOS6Flows or not ONOS6Flows\
or "Error" in ONOS7Flows or not ONOS7Flows:
main.log.report( "Error in getting ONOS intents" )
main.log.warn( "ONOS1 flows repsponse: " + ONOS1Flows )
main.log.warn( "ONOS2 flows repsponse: " + ONOS2Flows )
main.log.warn( "ONOS3 flows repsponse: " + ONOS3Flows )
main.log.warn( "ONOS4 flows repsponse: " + ONOS4Flows )
main.log.warn( "ONOS5 flows repsponse: " + ONOS5Flows )
main.log.warn( "ONOS6 flows repsponse: " + ONOS6Flows )
main.log.warn( "ONOS7 flows repsponse: " + ONOS7Flows )
elif len( ONOS1FlowsJson ) == len( ONOS2FlowsJson )\
and len( ONOS1FlowsJson ) == len( ONOS3FlowsJson )\
and len( ONOS1FlowsJson ) == len( ONOS4FlowsJson )\
and len( ONOS1FlowsJson ) == len( ONOS5FlowsJson )\
and len( ONOS1FlowsJson ) == len( ONOS6FlowsJson )\
and len( ONOS1FlowsJson ) == len( ONOS7FlowsJson ):
# TODO: Do a better check, maybe compare flows on switches?
flowState = ONOS1Flows
flowCheck = main.TRUE
main.log.report( "Flow count is consistent across all ONOS nodes" )
else:
main.log.warn( "ONOS1 flows: " +
json.dumps( ONOS1FlowsJson, sort_keys=True,
indent=4, separators=( ',', ': ' ) ) )
main.log.warn( "ONOS2 flows: " +
json.dumps( ONOS2FlowsJson, sort_keys=True,
indent=4, separators=( ',', ': ' ) ) )
main.log.warn( "ONOS3 flows: " +
json.dumps( ONOS3FlowsJson, sort_keys=True,
indent=4, separators=( ',', ': ' ) ) )
main.log.warn( "ONOS4 flows: " +
json.dumps( ONOS4FlowsJson, sort_keys=True,
indent=4, separators=( ',', ': ' ) ) )
main.log.warn( "ONOS5 flows: " +
json.dumps( ONOS5FlowsJson, sort_keys=True,
indent=4, separators=( ',', ': ' ) ) )
main.log.warn( "ONOS6 flows: " +
json.dumps( ONOS6FlowsJson, sort_keys=True,
indent=4, separators=( ',', ': ' ) ) )
main.log.warn( "ONOS7 flows: " +
json.dumps( ONOS7FlowsJson, sort_keys=True,
indent=4, separators=( ',', ': ' ) ) )
utilities.assert_equals(
expect=main.TRUE,
actual=flowCheck,
onpass="The flow count is consistent across all ONOS nodes",
onfail="ONOS nodes have different flow counts" )
main.step( "Get the OF Table entries" )
global flows
flows = []
for i in range( 1, 29 ):
flows.append( main.Mininet2.getFlowTable( 1.3, "s" + str( i ) ) )
# TODO: Compare switch flow tables with ONOS flow tables
main.step( "Start continuous pings" )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source1' ],
target=main.params[ 'PING' ][ 'target1' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source2' ],
target=main.params[ 'PING' ][ 'target2' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source3' ],
target=main.params[ 'PING' ][ 'target3' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source4' ],
target=main.params[ 'PING' ][ 'target4' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source5' ],
target=main.params[ 'PING' ][ 'target5' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source6' ],
target=main.params[ 'PING' ][ 'target6' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source7' ],
target=main.params[ 'PING' ][ 'target7' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source8' ],
target=main.params[ 'PING' ][ 'target8' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source9' ],
target=main.params[ 'PING' ][ 'target9' ],
pingTime=500 )
main.Mininet2.pingLong(
src=main.params[ 'PING' ][ 'source10' ],
target=main.params[ 'PING' ][ 'target10' ],
pingTime=500 )
main.step( "Create TestONTopology object" )
ctrls = []
count = 1
while True:
temp = ()
if ( 'ip' + str( count ) ) in main.params[ 'CTRL' ]:
temp = temp + ( getattr( main, ( 'ONOS' + str( count ) ) ), )
temp = temp + ( "ONOS" + str( count ), )
temp = temp + ( main.params[ 'CTRL' ][ 'ip' + str( count ) ], )
temp = temp + \
( eval( main.params[ 'CTRL' ][ 'port' + str( count ) ] ), )
ctrls.append( temp )
count = count + 1
else:
break
MNTopo = TestONTopology(
main.Mininet1,
ctrls ) # can also add Intent API info for intent operations
main.step( "Collecting topology information from ONOS" )
devices = []
devices.append( main.ONOScli1.devices() )
devices.append( main.ONOScli2.devices() )
devices.append( main.ONOScli3.devices() )
devices.append( main.ONOScli4.devices() )
devices.append( main.ONOScli5.devices() )
devices.append( main.ONOScli6.devices() )
devices.append( main.ONOScli7.devices() )
hosts = []
hosts.append( main.ONOScli1.hosts() )
hosts.append( main.ONOScli2.hosts() )
hosts.append( main.ONOScli3.hosts() )
hosts.append( main.ONOScli4.hosts() )
hosts.append( main.ONOScli5.hosts() )
hosts.append( main.ONOScli6.hosts() )
hosts.append( main.ONOScli7.hosts() )
ports = []
ports.append( main.ONOScli1.ports() )
ports.append( main.ONOScli2.ports() )
ports.append( main.ONOScli3.ports() )
ports.append( main.ONOScli4.ports() )
ports.append( main.ONOScli5.ports() )
ports.append( main.ONOScli6.ports() )
ports.append( main.ONOScli7.ports() )
links = []
links.append( main.ONOScli1.links() )
links.append( main.ONOScli2.links() )
links.append( main.ONOScli3.links() )
links.append( main.ONOScli4.links() )
links.append( main.ONOScli5.links() )
links.append( main.ONOScli6.links() )
links.append( main.ONOScli7.links() )
clusters = []
clusters.append( main.ONOScli1.clusters() )
clusters.append( main.ONOScli2.clusters() )
clusters.append( main.ONOScli3.clusters() )
clusters.append( main.ONOScli4.clusters() )
clusters.append( main.ONOScli5.clusters() )
clusters.append( main.ONOScli6.clusters() )
clusters.append( main.ONOScli7.clusters() )
# Compare json objects for hosts and dataplane clusters
# hosts
consistentHostsResult = main.TRUE
for controller in range( len( hosts ) ):
controllerStr = str( controller + 1 )
if "Error" not in hosts[ controller ]:
if hosts[ controller ] == hosts[ 0 ]:
continue
else: # hosts not consistent
main.log.report( "hosts from ONOS" +
controllerStr +
" is inconsistent with ONOS1" )
main.log.warn( repr( hosts[ controller ] ) )
consistentHostsResult = main.FALSE
else:
main.log.report( "Error in getting ONOS hosts from ONOS" +
controllerStr )
consistentHostsResult = main.FALSE
main.log.warn( "ONOS" + controllerStr +
" hosts response: " +
repr( hosts[ controller ] ) )
utilities.assert_equals(
expect=main.TRUE,
actual=consistentHostsResult,
onpass="Hosts view is consistent across all ONOS nodes",
onfail="ONOS nodes have different views of hosts" )
# Strongly connected clusters of devices
consistentClustersResult = main.TRUE
for controller in range( len( clusters ) ):
if "Error" not in clusters[ controller ]:
if clusters[ controller ] == clusters[ 0 ]:
continue
else: # clusters not consistent
main.log.report( "clusters from ONOS" +
controllerStr +
" is inconsistent with ONOS1" )
consistentClustersResult = main.FALSE
else:
main.log.report( "Error in getting dataplane clusters " +
"from ONOS" + controllerStr )
consistentClustersResult = main.FALSE
main.log.warn( "ONOS" + controllerStr +
" clusters response: " +
repr( clusters[ controller ] ) )
utilities.assert_equals(
expect=main.TRUE,
actual=consistentClustersResult,
onpass="Clusters view is consistent across all ONOS nodes",
onfail="ONOS nodes have different views of clusters" )
# there should always only be one cluster
numClusters = len( json.loads( clusters[ 0 ] ) )
utilities.assert_equals(
expect=1,
actual=numClusters,
onpass="ONOS shows 1 SCC",
onfail="ONOS shows " +
str( numClusters ) +
" SCCs" )
main.step( "Comparing ONOS topology to MN" )
devicesResults = main.TRUE
portsResults = main.TRUE
linksResults = main.TRUE
for controller in range( numControllers ):
controllerStr = str( controller + 1 )
if devices[ controller ] or "Error" not in devices[ controller ]:
currentDevicesResult = main.Mininet1.compareSwitches(
MNTopo,
json.loads(
devices[ controller ] ) )
else:
currentDevicesResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentDevicesResult,
onpass="ONOS" + controllerStr +
" Switches view is correct",
onfail="ONOS" + controllerStr +
" Switches view is incorrect" )
if ports[ controller ] or "Error" not in ports[ controller ]:
currentPortsResult = main.Mininet1.comparePorts(
MNTopo,
json.loads(
ports[ controller ] ) )
else:
currentPortsResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentPortsResult,
onpass="ONOS" + controllerStr +
" ports view is correct",
onfail="ONOS" + controllerStr +
" ports view is incorrect" )
if links[ controller ] or "Error" not in links[ controller ]:
currentLinksResult = main.Mininet1.compareLinks(
MNTopo,
json.loads(
links[ controller ] ) )
else:
currentLinksResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentLinksResult,
onpass="ONOS" + controllerStr +
" links view is correct",
onfail="ONOS" + controllerStr +
" links view is incorrect" )
devicesResults = devicesResults and currentDevicesResult
portsResults = portsResults and currentPortsResult
linksResults = linksResults and currentLinksResult
topoResult = devicesResults and portsResults and linksResults\
and consistentHostsResult and consistentClustersResult
utilities.assert_equals( expect=main.TRUE, actual=topoResult,
onpass="Topology Check Test successful",
onfail="Topology Check Test NOT successful" )
finalAssert = main.TRUE
finalAssert = finalAssert and topoResult and flowCheck \
and intentCheck and consistentMastership and rolesNotNull
utilities.assert_equals( expect=main.TRUE, actual=finalAssert,
onpass="State check successful",
onfail="State check NOT successful" )
def CASE6( self, main ):
"""
The Failure case. Since this is the Sanity test, we do nothing.
"""
import time
main.log.report( "Wait 60 seconds instead of inducing a failure" )
time.sleep( 60 )
utilities.assert_equals(
expect=main.TRUE,
actual=main.TRUE,
onpass="Sleeping 60 seconds",
onfail="Something is terribly wrong with my math" )
def CASE7( self, main ):
"""
Check state after ONOS failure
"""
import json
main.case( "Running ONOS Constant State Tests" )
# Assert that each device has a master
ONOS1MasterNotNull = main.ONOScli1.rolesNotNull()
ONOS2MasterNotNull = main.ONOScli2.rolesNotNull()
ONOS3MasterNotNull = main.ONOScli3.rolesNotNull()
ONOS4MasterNotNull = main.ONOScli4.rolesNotNull()
ONOS5MasterNotNull = main.ONOScli5.rolesNotNull()
ONOS6MasterNotNull = main.ONOScli6.rolesNotNull()
ONOS7MasterNotNull = main.ONOScli7.rolesNotNull()
rolesNotNull = ONOS1MasterNotNull and ONOS2MasterNotNull and\
ONOS3MasterNotNull and ONOS4MasterNotNull and\
ONOS5MasterNotNull and ONOS6MasterNotNull and\
ONOS7MasterNotNull
utilities.assert_equals(
expect=main.TRUE,
actual=rolesNotNull,
onpass="Each device has a master",
onfail="Some devices don't have a master assigned" )
main.step( "Check if switch roles are consistent across all nodes" )
ONOS1Mastership = main.ONOScli1.roles()
ONOS2Mastership = main.ONOScli2.roles()
ONOS3Mastership = main.ONOScli3.roles()
ONOS4Mastership = main.ONOScli4.roles()
ONOS5Mastership = main.ONOScli5.roles()
ONOS6Mastership = main.ONOScli6.roles()
ONOS7Mastership = main.ONOScli7.roles()
if "Error" in ONOS1Mastership or not ONOS1Mastership\
or "Error" in ONOS2Mastership or not ONOS2Mastership\
or "Error" in ONOS3Mastership or not ONOS3Mastership\
or "Error" in ONOS4Mastership or not ONOS4Mastership\
or "Error" in ONOS5Mastership or not ONOS5Mastership\
or "Error" in ONOS6Mastership or not ONOS6Mastership\
or "Error" in ONOS7Mastership or not ONOS7Mastership:
main.log.error( "Error in getting ONOS mastership" )
main.log.warn( "ONOS1 mastership response: " +
repr( ONOS1Mastership ) )
main.log.warn( "ONOS2 mastership response: " +
repr( ONOS2Mastership ) )
main.log.warn( "ONOS3 mastership response: " +
repr( ONOS3Mastership ) )
main.log.warn( "ONOS4 mastership response: " +
repr( ONOS4Mastership ) )
main.log.warn( "ONOS5 mastership response: " +
repr( ONOS5Mastership ) )
main.log.warn( "ONOS6 mastership response: " +
repr( ONOS6Mastership ) )
main.log.warn( "ONOS7 mastership response: " +
repr( ONOS7Mastership ) )
consistentMastership = main.FALSE
elif ONOS1Mastership == ONOS2Mastership\
and ONOS1Mastership == ONOS3Mastership\
and ONOS1Mastership == ONOS4Mastership\
and ONOS1Mastership == ONOS5Mastership\
and ONOS1Mastership == ONOS6Mastership\
and ONOS1Mastership == ONOS7Mastership:
consistentMastership = main.TRUE
main.log.report(
"Switch roles are consistent across all ONOS nodes" )
else:
main.log.warn( "ONOS1 roles: ", json.dumps(
json.loads( ONOS1Mastership ), sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
main.log.warn( "ONOS2 roles: ", json.dumps(
json.loads( ONOS2Mastership ), sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
main.log.warn( "ONOS3 roles: ", json.dumps(
json.loads( ONOS3Mastership ), sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
main.log.warn( "ONOS4 roles: ", json.dumps(
json.loads( ONOS4Mastership ), sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
main.log.warn( "ONOS5 roles: ", json.dumps(
json.loads( ONOS5Mastership ), sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
main.log.warn( "ONOS6 roles: ", json.dumps(
json.loads( ONOS6Mastership ), sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
main.log.warn( "ONOS7 roles: ", json.dumps(
json.loads( ONOS7Mastership ), sort_keys=True, indent=4,
separators=( ',', ': ' ) ) )
consistentMastership = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=consistentMastership,
onpass="Switch roles are consistent across all ONOS nodes",
onfail="ONOS nodes have different views of switch roles" )
description2 = "Compare switch roles from before failure"
main.step( description2 )
currentJson = json.loads( ONOS1Mastership )
oldJson = json.loads( mastershipState )
mastershipCheck = main.TRUE
for i in range( 1, 29 ):
switchDPID = str(
main.Mininet1.getSwitchDPID(
switch="s" +
str( i ) ) )
current = [ switch[ 'master' ] for switch in currentJson
if switchDPID in switch[ 'id' ] ]
old = [ switch[ 'master' ] for switch in oldJson
if switchDPID in switch[ 'id' ] ]
if current == old:
mastershipCheck = mastershipCheck and main.TRUE
else:
main.log.warn( "Mastership of switch %s changed" % switchDPID )
mastershipCheck = main.FALSE
if mastershipCheck == main.TRUE:
main.log.report( "Mastership of Switches was not changed" )
utilities.assert_equals(
expect=main.TRUE,
actual=mastershipCheck,
onpass="Mastership of Switches was not changed",
onfail="Mastership of some switches changed" )
mastershipCheck = mastershipCheck and consistentMastership
main.step( "Get the intents and compare across all nodes" )
ONOS1Intents = main.ONOScli1.intents( jsonFormat=True )
ONOS2Intents = main.ONOScli2.intents( jsonFormat=True )
ONOS3Intents = main.ONOScli3.intents( jsonFormat=True )
ONOS4Intents = main.ONOScli4.intents( jsonFormat=True )
ONOS5Intents = main.ONOScli5.intents( jsonFormat=True )
ONOS6Intents = main.ONOScli6.intents( jsonFormat=True )
ONOS7Intents = main.ONOScli7.intents( jsonFormat=True )
intentCheck = main.FALSE
if "Error" in ONOS1Intents or not ONOS1Intents\
or "Error" in ONOS2Intents or not ONOS2Intents\
or "Error" in ONOS3Intents or not ONOS3Intents\
or "Error" in ONOS4Intents or not ONOS4Intents\
or "Error" in ONOS5Intents or not ONOS5Intents\
or "Error" in ONOS6Intents or not ONOS6Intents\
or "Error" in ONOS7Intents or not ONOS7Intents:
main.log.report( "Error in getting ONOS intents" )
main.log.warn( "ONOS1 intents response: " + repr( ONOS1Intents ) )
main.log.warn( "ONOS2 intents response: " + repr( ONOS2Intents ) )
main.log.warn( "ONOS3 intents response: " + repr( ONOS3Intents ) )
main.log.warn( "ONOS4 intents response: " + repr( ONOS4Intents ) )
main.log.warn( "ONOS5 intents response: " + repr( ONOS5Intents ) )
main.log.warn( "ONOS6 intents response: " + repr( ONOS6Intents ) )
main.log.warn( "ONOS7 intents response: " + repr( ONOS7Intents ) )
elif ONOS1Intents == ONOS2Intents\
and ONOS1Intents == ONOS3Intents\
and ONOS1Intents == ONOS4Intents\
and ONOS1Intents == ONOS5Intents\
and ONOS1Intents == ONOS6Intents\
and ONOS1Intents == ONOS7Intents:
intentCheck = main.TRUE
main.log.report( "Intents are consistent across all ONOS nodes" )
else:
main.log.warn( "ONOS1 intents: " )
print json.dumps( json.loads( ONOS1Intents ), sort_keys=True,
indent=4, separators=( ',', ': ' ) )
main.log.warn( "ONOS2 intents: " )
print json.dumps( json.loads( ONOS2Intents ), sort_keys=True,
indent=4, separators=( ',', ': ' ) )
main.log.warn( "ONOS3 intents: " )
print json.dumps( json.loads( ONOS3Intents ), sort_keys=True,
indent=4, separators=( ',', ': ' ) )
main.log.warn( "ONOS4 intents: " )
print json.dumps( json.loads( ONOS4Intents ), sort_keys=True,
indent=4, separators=( ',', ': ' ) )
main.log.warn( "ONOS5 intents: " )
print json.dumps( json.loads( ONOS5Intents ), sort_keys=True,
indent=4, separators=( ',', ': ' ) )
main.log.warn( "ONOS6 intents: " )
print json.dumps( json.loads( ONOS6Intents ), sort_keys=True,
indent=4, separators=( ',', ': ' ) )
main.log.warn( "ONOS7 intents: " )
print json.dumps( json.loads( ONOS7Intents ), sort_keys=True,
indent=4, separators=( ',', ': ' ) )
utilities.assert_equals(
expect=main.TRUE,
actual=intentCheck,
onpass="Intents are consistent across all ONOS nodes",
onfail="ONOS nodes have different views of intents" )
# Print the intent states
intents = []
intents.append( ONOS1Intents )
intents.append( ONOS2Intents )
intents.append( ONOS3Intents )
intents.append( ONOS4Intents )
intents.append( ONOS5Intents )
intents.append( ONOS6Intents )
intents.append( ONOS7Intents )
intentStates = []
for node in intents: # Iter through ONOS nodes
nodeStates = []
for intent in json.loads( node ): # Iter through intents of a node
nodeStates.append( intent[ 'state' ] )
intentStates.append( nodeStates )
out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
main.log.info( dict( out ) )
# NOTE: Hazelcast has no durability, so intents are lost across system
# restarts
main.step( "Compare current intents with intents before the failure" )
# NOTE: this requires case 5 to pass for intentState to be set.
# maybe we should stop the test if that fails?
sameIntents = main.TRUE
if intentState and intentState == ONOS1Intents:
sameIntents = main.TRUE
main.log.report( "Intents are consistent with before failure" )
# TODO: possibly the states have changed? we may need to figure out
# what the aceptable states are
else:
try:
main.log.warn( "ONOS1 intents: " )
print json.dumps( json.loads( ONOS1Intents ),
sort_keys=True, indent=4,
separators=( ',', ': ' ) )
except:
pass
sameIntents = main.FALSE
utilities.assert_equals(
expect=main.TRUE,
actual=sameIntents,
onpass="Intents are consistent with before failure",
onfail="The Intents changed during failure" )
intentCheck = intentCheck and sameIntents
main.step( "Get the OF Table entries and compare to before " +
"component failure" )
FlowTables = main.TRUE
flows2 = []
for i in range( 28 ):
main.log.info( "Checking flow table on s" + str( i + 1 ) )
tmpFlows = main.Mininet2.getFlowTable( 1.3, "s" + str( i + 1 ) )
flows2.append( tmpFlows )
tempResult = main.Mininet2.flowComp(
flow1=flows[ i ],
flow2=tmpFlows )
FlowTables = FlowTables and tempResult
if FlowTables == main.FALSE:
main.log.info( "Differences in flow table for switch: s" +
str( i + 1 ) )
if FlowTables == main.TRUE:
main.log.report( "No changes were found in the flow tables" )
utilities.assert_equals(
expect=main.TRUE,
actual=FlowTables,
onpass="No changes were found in the flow tables",
onfail="Changes were found in the flow tables" )
main.step( "Check the continuous pings to ensure that no packets " +
"were dropped during component failure" )
# FIXME: This check is always failing. Investigate cause
# NOTE: this may be something to do with file permsissions
# or slight change in format
main.Mininet2.pingKill(
main.params[ 'TESTONUSER' ],
main.params[ 'TESTONIP' ] )
LossInPings = main.FALSE
# NOTE: checkForLoss returns main.FALSE with 0% packet loss
for i in range( 8, 18 ):
main.log.info(
"Checking for a loss in pings along flow from s" +
str( i ) )
LossInPings = main.Mininet2.checkForLoss(
"/tmp/ping.h" +
str( i ) ) or LossInPings
if LossInPings == main.TRUE:
main.log.info( "Loss in ping detected" )
elif LossInPings == main.ERROR:
main.log.info( "There are multiple mininet process running" )
elif LossInPings == main.FALSE:
main.log.info( "No Loss in the pings" )
main.log.report( "No loss of dataplane connectivity" )
utilities.assert_equals(
expect=main.FALSE,
actual=LossInPings,
onpass="No Loss of connectivity",
onfail="Loss of dataplane connectivity detected" )
# Test of LeadershipElection
# NOTE: this only works for the sanity test. In case of failures,
# leader will likely change
leader = ONOS1Ip
leaderResult = main.TRUE
for controller in range( 1, numControllers + 1 ):
# loop through ONOScli handlers
node = getattr( main, ( 'ONOScli' + str( controller ) ) )
leaderN = node.electionTestLeader()
# verify leader is ONOS1
if leaderN == leader:
# all is well
# NOTE: In failure scenario, this could be a new node, maybe
# check != ONOS1
pass
elif leaderN == main.FALSE:
# error in response
main.log.report( "Something is wrong with " +
"electionTestLeader function," +
" check the error logs" )
leaderResult = main.FALSE
elif leader != leaderN:
leaderResult = main.FALSE
main.log.report( "ONOS" + str( controller ) + " sees " +
str( leaderN ) +
" as the leader of the election app. " +
"Leader should be " + str( leader ) )
if leaderResult:
main.log.report( "Leadership election tests passed( consistent " +
"view of leader across listeners and a new " +
"leader was re-elected if applicable )" )
utilities.assert_equals(
expect=main.TRUE,
actual=leaderResult,
onpass="Leadership election passed",
onfail="Something went wrong with Leadership election" )
result = mastershipCheck and intentCheck and FlowTables and\
( not LossInPings ) and rolesNotNull and leaderResult
result = int( result )
if result == main.TRUE:
main.log.report( "Constant State Tests Passed" )
utilities.assert_equals( expect=main.TRUE, actual=result,
onpass="Constant State Tests Passed",
onfail="Constant state tests failed" )
def CASE8( self, main ):
"""
Compare topo
"""
import sys
# FIXME add this path to params
sys.path.append( "/home/admin/sts" )
# assumes that sts is already in you PYTHONPATH
from sts.topology.teston_topology import TestONTopology
import json
import time
description = "Compare ONOS Topology view to Mininet topology"
main.case( description )
main.log.report( description )
main.step( "Create TestONTopology object" )
ctrls = []
count = 1
while True:
temp = ()
if ( 'ip' + str( count ) ) in main.params[ 'CTRL' ]:
temp = temp + ( getattr( main, ( 'ONOS' + str( count ) ) ), )
temp = temp + ( "ONOS" + str( count ), )
temp = temp + ( main.params[ 'CTRL' ][ 'ip' + str( count ) ], )
temp = temp + \
( eval( main.params[ 'CTRL' ][ 'port' + str( count ) ] ), )
ctrls.append( temp )
count = count + 1
else:
break
MNTopo = TestONTopology(
main.Mininet1,
ctrls ) # can also add Intent API info for intent operations
main.step( "Comparing ONOS topology to MN" )
devicesResults = main.TRUE
portsResults = main.TRUE
linksResults = main.TRUE
topoResult = main.FALSE
elapsed = 0
count = 0
main.step( "Collecting topology information from ONOS" )
startTime = time.time()
# Give time for Gossip to work
while topoResult == main.FALSE and elapsed < 60:
count = count + 1
if count > 1:
# TODO: Depricate STS usage
MNTopo = TestONTopology(
main.Mininet1,
ctrls )
cliStart = time.time()
devices = []
devices.append( main.ONOScli1.devices() )
devices.append( main.ONOScli2.devices() )
devices.append( main.ONOScli3.devices() )
devices.append( main.ONOScli4.devices() )
devices.append( main.ONOScli5.devices() )
devices.append( main.ONOScli6.devices() )
devices.append( main.ONOScli7.devices() )
hosts = []
hosts.append( json.loads( main.ONOScli1.hosts() ) )
hosts.append( json.loads( main.ONOScli2.hosts() ) )
hosts.append( json.loads( main.ONOScli3.hosts() ) )
hosts.append( json.loads( main.ONOScli4.hosts() ) )
hosts.append( json.loads( main.ONOScli5.hosts() ) )
hosts.append( json.loads( main.ONOScli6.hosts() ) )
hosts.append( json.loads( main.ONOScli7.hosts() ) )
for controller in range( 0, len( hosts ) ):
controllerStr = str( controller + 1 )
for host in hosts[ controller ]:
if host[ 'ips' ] == []:
main.log.error(
"DEBUG:Error with host ips on controller" +
controllerStr + ": " + str( host ) )
ports = []
ports.append( main.ONOScli1.ports() )
ports.append( main.ONOScli2.ports() )
ports.append( main.ONOScli3.ports() )
ports.append( main.ONOScli4.ports() )
ports.append( main.ONOScli5.ports() )
ports.append( main.ONOScli6.ports() )
ports.append( main.ONOScli7.ports() )
links = []
links.append( main.ONOScli1.links() )
links.append( main.ONOScli2.links() )
links.append( main.ONOScli3.links() )
links.append( main.ONOScli4.links() )
links.append( main.ONOScli5.links() )
links.append( main.ONOScli6.links() )
links.append( main.ONOScli7.links() )
clusters = []
clusters.append( main.ONOScli1.clusters() )
clusters.append( main.ONOScli2.clusters() )
clusters.append( main.ONOScli3.clusters() )
clusters.append( main.ONOScli4.clusters() )
clusters.append( main.ONOScli5.clusters() )
clusters.append( main.ONOScli6.clusters() )
clusters.append( main.ONOScli7.clusters() )
elapsed = time.time() - startTime
cliTime = time.time() - cliStart
print "CLI time: " + str( cliTime )
for controller in range( numControllers ):
controllerStr = str( controller + 1 )
if devices[ controller ] or "Error" not in devices[
controller ]:
currentDevicesResult = main.Mininet1.compareSwitches(
MNTopo,
json.loads(
devices[ controller ] ) )
else:
currentDevicesResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentDevicesResult,
onpass="ONOS" + controllerStr +
" Switches view is correct",
onfail="ONOS" + controllerStr +
" Switches view is incorrect" )
if ports[ controller ] or "Error" not in ports[ controller ]:
currentPortsResult = main.Mininet1.comparePorts(
MNTopo,
json.loads(
ports[ controller ] ) )
else:
currentPortsResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentPortsResult,
onpass="ONOS" + controllerStr +
" ports view is correct",
onfail="ONOS" + controllerStr +
" ports view is incorrect" )
if links[ controller ] or "Error" not in links[ controller ]:
currentLinksResult = main.Mininet1.compareLinks(
MNTopo,
json.loads(
links[ controller ] ) )
else:
currentLinksResult = main.FALSE
utilities.assert_equals( expect=main.TRUE,
actual=currentLinksResult,
onpass="ONOS" + controllerStr +
" links view is correct",
onfail="ONOS" + controllerStr +
" links view is incorrect" )
devicesResults = devicesResults and currentDevicesResult
portsResults = portsResults and currentPortsResult
linksResults = linksResults and currentLinksResult
# Compare json objects for hosts and dataplane clusters
# hosts
consistentHostsResult = main.TRUE
for controller in range( len( hosts ) ):
controllerStr = str( controller + 1 )
if "Error" not in hosts[ controller ]:
if hosts[ controller ] == hosts[ 0 ]:
continue
else: # hosts not consistent
main.log.report( "hosts from ONOS" + controllerStr +
" is inconsistent with ONOS1" )
main.log.warn( repr( hosts[ controller ] ) )
consistentHostsResult = main.FALSE
else:
main.log.report( "Error in getting ONOS hosts from ONOS" +
controllerStr )
consistentHostsResult = main.FALSE
main.log.warn( "ONOS" + controllerStr +
" hosts response: " +
repr( hosts[ controller ] ) )
utilities.assert_equals(
expect=main.TRUE,
actual=consistentHostsResult,
onpass="Hosts view is consistent across all ONOS nodes",
onfail="ONOS nodes have different views of hosts" )
# Strongly connected clusters of devices
consistentClustersResult = main.TRUE
for controller in range( len( clusters ) ):
controllerStr = str( controller + 1 )
if "Error" not in clusters[ controller ]:
if clusters[ controller ] == clusters[ 0 ]:
continue
else: # clusters not consistent
main.log.report( "clusters from ONOS" +
controllerStr +
" is inconsistent with ONOS1" )
consistentClustersResult = main.FALSE
else:
main.log.report( "Error in getting dataplane clusters " +
"from ONOS" + controllerStr )
consistentClustersResult = main.FALSE
main.log.warn( "ONOS" + controllerStr +
" clusters response: " +
repr( clusters[ controller ] ) )
utilities.assert_equals(
expect=main.TRUE,
actual=consistentClustersResult,
onpass="Clusters view is consistent across all ONOS nodes",
onfail="ONOS nodes have different views of clusters" )
# there should always only be one cluster
numClusters = len( json.loads( clusters[ 0 ] ) )
utilities.assert_equals(
expect=1,
actual=numClusters,
onpass="ONOS shows 1 SCC",
onfail="ONOS shows " +
str( numClusters ) +
" SCCs" )
topoResult = ( devicesResults and portsResults and linksResults
and consistentHostsResult
and consistentClustersResult )
topoResult = topoResult and int( count <= 2 )
note = "note it takes about " + str( int( cliTime ) ) + \
" seconds for the test to make all the cli calls to fetch " +\
"the topology from each ONOS instance"
main.log.info(
"Very crass estimate for topology discovery/convergence( " +
str( note ) + " ): " + str( elapsed ) + " seconds, " +
str( count ) + " tries" )
utilities.assert_equals( expect=main.TRUE, actual=topoResult,
onpass="Topology Check Test successful",
onfail="Topology Check Test NOT successful" )
if topoResult == main.TRUE:
main.log.report( "ONOS topology view matches Mininet topology" )
def CASE9( self, main ):
"""
Link s3-s28 down
"""
import time
# NOTE: You should probably run a topology check after this
linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
description = "Turn off a link to ensure that Link Discovery " +\
"is working properly"
main.log.report( description )
main.case( description )
main.step( "Kill Link between s3 and s28" )
LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" )
main.log.info(
"Waiting " +
str( linkSleep ) +
" seconds for link down to be discovered" )
time.sleep( linkSleep )
utilities.assert_equals( expect=main.TRUE, actual=LinkDown,
onpass="Link down succesful",
onfail="Failed to bring link down" )
# TODO do some sort of check here
def CASE10( self, main ):
"""
Link s3-s28 up
"""
import time
# NOTE: You should probably run a topology check after this
linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
description = "Restore a link to ensure that Link Discovery is " + \
"working properly"
main.log.report( description )
main.case( description )
main.step( "Bring link between s3 and s28 back up" )
LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" )
main.log.info(
"Waiting " +
str( linkSleep ) +
" seconds for link up to be discovered" )
time.sleep( linkSleep )
utilities.assert_equals( expect=main.TRUE, actual=LinkUp,
onpass="Link up succesful",
onfail="Failed to bring link up" )
# TODO do some sort of check here
def CASE11( self, main ):
"""
Switch Down
"""
# NOTE: You should probably run a topology check after this
import time
switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
description = "Killing a switch to ensure it is discovered correctly"
main.log.report( description )
main.case( description )
switch = main.params[ 'kill' ][ 'switch' ]
switchDPID = main.params[ 'kill' ][ 'dpid' ]
# TODO: Make this switch parameterizable
main.step( "Kill " + switch )
main.log.report( "Deleting " + switch )
main.Mininet1.delSwitch( switch )
main.log.info( "Waiting " + str( switchSleep ) +
" seconds for switch down to be discovered" )
time.sleep( switchSleep )
device = main.ONOScli1.getDevice( dpid=switchDPID )
# Peek at the deleted switch
main.log.warn( str( device ) )
result = main.FALSE
if device and device[ 'available' ] is False:
result = main.TRUE
utilities.assert_equals( expect=main.TRUE, actual=result,
onpass="Kill switch succesful",
onfail="Failed to kill switch?" )
def CASE12( self, main ):
"""
Switch Up
"""
# NOTE: You should probably run a topology check after this
import time
switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
switch = main.params[ 'kill' ][ 'switch' ]
switchDPID = main.params[ 'kill' ][ 'dpid' ]
links = main.params[ 'kill' ][ 'links' ].split()
description = "Adding a switch to ensure it is discovered correctly"
main.log.report( description )
main.case( description )
main.step( "Add back " + switch )
main.log.report( "Adding back " + switch )
main.Mininet1.addSwitch( switch, dpid=switchDPID )
# TODO: New dpid or same? Ask Thomas?
for peer in links:
main.Mininet1.addLink( switch, peer )
main.Mininet1.assignSwController(
sw=switch.split( 's' )[ 1 ],
count=numControllers,
ip1=ONOS1Ip,
port1=ONOS1Port,
ip2=ONOS2Ip,
port2=ONOS2Port,
ip3=ONOS3Ip,
port3=ONOS3Port,
ip4=ONOS4Ip,
port4=ONOS4Port,
ip5=ONOS5Ip,
port5=ONOS5Port,
ip6=ONOS6Ip,
port6=ONOS6Port,
ip7=ONOS7Ip,
port7=ONOS7Port )
main.log.info(
"Waiting " +
str( switchSleep ) +
" seconds for switch up to be discovered" )
time.sleep( switchSleep )
device = main.ONOScli1.getDevice( dpid=switchDPID )
# Peek at the deleted switch
main.log.warn( str( device ) )
result = main.FALSE
if device and device[ 'available' ]:
result = main.TRUE
utilities.assert_equals( expect=main.TRUE, actual=result,
onpass="add switch succesful",
onfail="Failed to add switch?" )
def CASE13( self, main ):
"""
Clean up
"""
import os
import time
# TODO: make use of this elsewhere
ips = []
ips.append( ONOS1Ip )
ips.append( ONOS2Ip )
ips.append( ONOS3Ip )
ips.append( ONOS4Ip )
ips.append( ONOS5Ip )
ips.append( ONOS6Ip )
ips.append( ONOS7Ip )
# printing colors to terminal
colors = {}
colors[ 'cyan' ] = '\033[96m'
colors[ 'purple' ] = '\033[95m'
colors[ 'blue' ] = '\033[94m'
colors[ 'green' ] = '\033[92m'
colors[ 'yellow' ] = '\033[93m'
colors[ 'red' ] = '\033[91m'
colors[ 'end' ] = '\033[0m'
description = "Test Cleanup"
main.log.report( description )
main.case( description )
main.step( "Killing tcpdumps" )
main.Mininet2.stopTcpdump()
main.step( "Checking ONOS Logs for errors" )
for i in range( 7 ):
print colors[ 'purple' ] + "Checking logs for errors on " + \
"ONOS" + str( i + 1 ) + ":" + colors[ 'end' ]
print main.ONOSbench.checkLogs( ips[ i ] )
main.step( "Copying MN pcap and ONOS log files to test station" )
testname = main.TEST
teststationUser = main.params[ 'TESTONUSER' ]
teststationIP = main.params[ 'TESTONIP' ]
# NOTE: MN Pcap file is being saved to ~/packet_captures
# scp this file as MN and TestON aren't necessarily the same vm
# FIXME: scp
# mn files
# TODO: Load these from params
# NOTE: must end in /
logFolder = "/opt/onos/log/"
logFiles = [ "karaf.log", "karaf.log.1" ]
# NOTE: must end in /
dstDir = "~/packet_captures/"
for f in logFiles:
for i in range( 7 ):
main.ONOSbench.handle.sendline( "scp sdn@" + ips[ i ] + ":" +
logFolder + f + " " +
teststationUser + "@" +
teststationIP + ":" +
dstDir + str( testname ) +
"-ONOS" + str( i + 1 ) + "-" +
f )
# std*.log's
# NOTE: must end in /
logFolder = "/opt/onos/var/"
logFiles = [ "stderr.log", "stdout.log" ]
# NOTE: must end in /
dstDir = "~/packet_captures/"
for f in logFiles:
for i in range( 7 ):
main.ONOSbench.handle.sendline( "scp sdn@" + ips[ i ] + ":" +
logFolder + f + " " +
teststationUser + "@" +
teststationIP + ":" +
dstDir + str( testname ) +
"-ONOS" + str( i + 1 ) + "-" +
f )
# sleep so scp can finish
time.sleep( 10 )
main.step( "Packing and rotating pcap archives" )
os.system( "~/TestON/dependencies/rotate.sh " + str( testname ) )
# TODO: actually check something here
utilities.assert_equals( expect=main.TRUE, actual=main.TRUE,
onpass="Test cleanup successful",
onfail="Test cleanup NOT successful" )
def CASE14( self, main ):
"""
start election app on all onos nodes
"""
leaderResult = main.TRUE
# install app on onos 1
main.log.info( "Install leadership election app" )
main.ONOScli1.featureInstall( "onos-app-election" )
# wait for election
# check for leader
leader = main.ONOScli1.electionTestLeader()
# verify leader is ONOS1
if leader == ONOS1Ip:
# all is well
pass
elif leader is None:
# No leader elected
main.log.report( "No leader was elected" )
leaderResult = main.FALSE
elif leader == main.FALSE:
# error in response
# TODO: add check for "Command not found:" in the driver, this
# means the app isn't loaded
main.log.report( "Something is wrong with electionTestLeader" +
" function, check the error logs" )
leaderResult = main.FALSE
else:
# error in response
main.log.report(
"Unexpected response from electionTestLeader function:'" +
str( leader ) +
"'" )
leaderResult = main.FALSE
# install on other nodes and check for leader.
# Should be onos1 and each app should show the same leader
for controller in range( 2, numControllers + 1 ):
# loop through ONOScli handlers
node = getattr( main, ( 'ONOScli' + str( controller ) ) )
node.featureInstall( "onos-app-election" )
leaderN = node.electionTestLeader()
# verify leader is ONOS1
if leaderN == ONOS1Ip:
# all is well
pass
elif leaderN == main.FALSE:
# error in response
# TODO: add check for "Command not found:" in the driver, this
# means the app isn't loaded
main.log.report( "Something is wrong with " +
"electionTestLeader function, check the" +
" error logs" )
leaderResult = main.FALSE
elif leader != leaderN:
leaderResult = main.FALSE
main.log.report( "ONOS" + str( controller ) + " sees " +
str( leaderN ) +
" as the leader of the election app. Leader" +
" should be " +
str( leader ) )
if leaderResult:
main.log.report( "Leadership election tests passed( consistent " +
"view of leader across listeners and a leader " +
"was elected )" )
utilities.assert_equals(
expect=main.TRUE,
actual=leaderResult,
onpass="Leadership election passed",
onfail="Something went wrong with Leadership election" )
def CASE15( self, main ):
"""
Check that Leadership Election is still functional
"""
leaderResult = main.TRUE
description = "Check that Leadership Election is still functional"
main.log.report( description )
main.case( description )
main.step( "Find current leader and withdraw" )
leader = main.ONOScli1.electionTestLeader()
# TODO: do some sanity checking on leader before using it
withdrawResult = main.FALSE
if leader == ONOS1Ip:
oldLeader = getattr( main, "ONOScli1" )
elif leader == ONOS2Ip:
oldLeader = getattr( main, "ONOScli2" )
elif leader == ONOS3Ip:
oldLeader = getattr( main, "ONOScli3" )
elif leader == ONOS4Ip:
oldLeader = getattr( main, "ONOScli4" )
elif leader == ONOS5Ip:
oldLeader = getattr( main, "ONOScli5" )
elif leader == ONOS6Ip:
oldLeader = getattr( main, "ONOScli6" )
elif leader == ONOS7Ip:
oldLeader = getattr( main, "ONOScli7" )
elif leader is None or leader == main.FALSE:
main.log.report(
"Leader for the election app should be an ONOS node," +
"instead got '" +
str( leader ) +
"'" )
leaderResult = main.FALSE
withdrawResult = oldLeader.electionTestWithdraw()
utilities.assert_equals(
expect=main.TRUE,
actual=withdrawResult,
onpass="App was withdrawn from election",
onfail="App was not withdrawn from election" )
main.step( "Make sure new leader is elected" )
leaderList = []
for controller in range( 1, numControllers + 1 ):
# loop through ONOScli handlers
node = getattr( main, ( 'ONOScli' + str( controller ) ) )
leaderList.append( node.electionTestLeader() )
for leaderN in leaderList:
if leaderN == leader:
main.log.report(
"ONOS" +
str( controller ) +
" still sees " +
str( leader ) +
" as leader after they withdrew" )
leaderResult = main.FALSE
elif leaderN == main.FALSE:
# error in response
# TODO: add check for "Command not found:" in the driver, this
# means the app isn't loaded
main.log.report( "Something is wrong with " +
"electionTestLeader function, " +
"check the error logs" )
leaderResult = main.FALSE
consistentLeader = main.FALSE
if len( set( leaderList ) ) == 1:
main.log.info( "Each Election-app sees '" +
str( leaderList[ 0 ] ) +
"' as the leader" )
consistentLeader = main.TRUE
else:
main.log.report(
"Inconsistent responses for leader of Election-app:" )
for n in range( len( leaderList ) ):
main.log.report( "ONOS" + str( n + 1 ) + " response: " +
str( leaderList[ n ] ) )
if leaderResult:
main.log.report( "Leadership election tests passed( consistent " +
"view of leader across listeners and a new " +
"leader was elected when the old leader " +
"resigned )" )
utilities.assert_equals(
expect=main.TRUE,
actual=leaderResult,
onpass="Leadership election passed",
onfail="Something went wrong with Leadership election" )
main.step(
"Run for election on old leader( just so everyone is in the hat )" )
runResult = oldLeader.electionTestRun()
utilities.assert_equals(
expect=main.TRUE,
actual=runResult,
onpass="App re-ran for election",
onfail="App failed to run for election" )
if consistentLeader == main.TRUE:
afterRun = main.ONOScli1.electionTestLeader()
# verify leader didn't just change
if afterRun == leaderList[ 0 ]:
leaderResult = main.TRUE
else:
leaderResult = main.FALSE
# TODO: assert on run and withdraw results?
utilities.assert_equals(
expect=main.TRUE,
actual=leaderResult,
onpass="Leadership election passed",
onfail="Something went wrong with Leadership election after " +
"the old leader re-ran for election" )