blob: 16dfd79e3591c08f40335d140db7be3bfd03c547 [file] [log] [blame]
"""
Copyright 2017 Open Networking Foundation (ONF)
Please refer questions to either the onos test mailing list at <onos-test@onosproject.org>,
the System Testing Plans and Results wiki page at <https://wiki.onosproject.org/x/voMg>,
or the System Testing Guide page at <https://wiki.onosproject.org/x/WYQg>
TestON is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
TestON is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with TestON. If not, see <http://www.gnu.org/licenses/>.
"""
class Cluster():
def __str__( self ):
return self.name
def __repr__( self ):
controllers = []
runningNodes = []
for ctrl in self.controllers:
controllers.append( str( ctrl ) )
return "%s[%s]" % ( self.name, ", ".join( controllers ) )
def __init__( self, ctrlList=[], name="Cluster" ):
'''
controllers : All the nodes
runningNodes : Node that are specifically running from the test.
ie) When the test is testing different number of nodes on each
run.
numCtrls : number of runningNodes
maxCtrls : number of controllers
'''
self.controllers = ctrlList
self.runningNodes = ctrlList
self.numCtrls = len( self.runningNodes )
self.maxCtrls = len( self.controllers )
self.name = str( name )
self.iterator = iter( self.active() )
def getIps( self, activeOnly=False, allNode=False ):
"""
Description:
get the list of the ip. Default to get ips of running nodes.
Required:
* activeOnly - True for getting ips of active nodes
* allNode - True for getting ips of all nodes
Returns:
Retruns ips of active nodes if activeOnly is True.
Returns ips of all nodes if allNode is True.
"""
ips = []
if allNode:
nodeList = self.controllers
else:
if activeOnly:
nodeList = self.active()
else:
nodeList = self.runningNodes
for ctrl in nodeList:
ips.append( ctrl.ipAddress )
return ips
def resetActive( self ):
"""
Description:
reset the activeness of the runningNodes to be false
Required:
Returns:
"""
for ctrl in self.runningNodes:
ctrl.active = False
def getRunningPos( self ):
"""
Description:
get the position of the active running nodes.
Required:
Returns:
Retruns the list of the position of the active
running nodes.
"""
return [ ctrl.pos for ctrl in self.runningNodes
if ctrl.active ]
def setRunningNode( self, numCtrls ):
"""
Description:
Set running nodes of n number of nodes.
It will create new list of runningNodes.
If numCtrls is a list, it will add the nodes of the
list.
Required:
* numCtrls - number of nodes to be set.
Returns:
"""
self.runningNodes = []
for i in numCtrls if isinstance( numCtrls, list ) else range( numCtrls ) :
self.runningNodes.append( self.controllers[ i ] )
self.numCtrls = len( numCtrls ) if isinstance( numCtrls, list ) else numCtrls
def active( self, node=None ):
"""
Description:
get the list/controller of the active controller.
Required:
* node - position of the node to get from the active controller.
Returns:
Return a list of active controllers in the cluster if node is None
if not, it will return the nth controller.
"""
result = [ ctrl for ctrl in self.runningNodes
if ctrl.active ]
return result if node is None else result[ node % len( result ) ]
def next( self ):
"""
An iterator for the cluster's controllers that
resets when there are no more elements.
Returns the next controller in the cluster
"""
try:
return self.iterator.next()
except StopIteration:
self.reset()
try:
return self.iterator.next()
except StopIteration:
raise RuntimeError( "There are no active nodes in the cluster" )
def reset( self ):
"""
Resets the cluster iterator.
This should be used whenever a node's active state is changed
and is also used internally when the iterator has been exhausted.
"""
self.iterator = iter( self.active() )
def createCell( self, cellName, Mininet, useSSH, ips, installMax=False ):
"""
Description:
create a new cell
Required:
* cellName - The name of the cell.
* Mininet - a mininet driver that will be used.
* useSSH - True for using ssh when creating a cell
* ips - ip(s) of the node(s).
Returns:
"""
self.command( "createCellFile",
args=[ main.ONOSbench.ip_address,
cellName,
Mininet if isinstance(Mininet, str) else
Mininet.ip_address,
main.apps,
ips,
main.ONOScell.karafUser,
useSSH ],
specificDriver=1,
getFrom=0 if installMax else 1 )
def uninstall( self, uninstallMax ):
"""
Description:
uninstalling onos
Required:
* uninstallMax - True for uninstalling max number of nodes
False for uninstalling the current running nodes.
Returns:
Returns main.TRUE if it successfully uninstalled.
"""
result = main.TRUE
uninstallResult = self.command( "onosUninstall",
kwargs={ "nodeIp": "ipAddress" },
specificDriver=1,
getFrom=0 if uninstallMax else 1,
funcFromCtrl=True )
for uninstallR in uninstallResult:
result = result and uninstallR
return result
def applyCell( self, cellName, installMax=False ):
"""
Description:
apply the cell with cellName. It will also verify the
cell.
Required:
* cellName - The name of the cell.
Returns:
Returns main.TRUE if it successfully set and verify cell.
"""
setCellResult = self.command( "setCell",
args=[ cellName ],
specificDriver=1,
getFrom=0 if installMax else 1 )
verifyResult = self.command( "verifyCell",
specificDriver=1,
getFrom=0 if installMax else 1 )
result = main.TRUE
for i in range( len( setCellResult ) ):
result = result and setCellResult[ i ] and verifyResult[ i ]
return result
def checkService( self ):
"""
Description:
Checking if the onos service is up. If not, it will
start the onos service manually.
Required:
Returns:
Returns main.TRUE if it successfully checked
"""
stopResult = main.TRUE
startResult = main.TRUE
onosIsUp = main.TRUE
onosUp = self.command( "isup",
args=[ "ipAddress" ],
specificDriver=1,
getFrom=1,
funcFromCtrl=True )
for i in range( len( onosUp ) ):
ctrl = self.controllers[ i ]
onosIsUp = onosIsUp and onosUp[ i ]
if onosUp[ i ] == main.TRUE:
main.log.report( ctrl.name + " is up and ready" )
else:
main.log.report( ctrl.name + " may not be up, stop and " +
"start ONOS again " )
stopResult = stopResult and main.ONOSbench.onosStop( ctrl.ipAddress )
startResult = startResult and main.ONOSbench.onosStart( ctrl.ipAddress )
if not startResult or stopResult:
main.log.report( ctrl.name + " did not start correctly." )
return onosIsUp and stopResult and startResult
def kill( self, killMax, stopOnos ):
"""
Description:
killing the onos. It will either kill the current runningnodes or
max number of the nodes.
Required:
* killRemoveMax - The boolean that will decide either to kill
only running nodes (False) or max number of nodes (True).
* stopOnos - If wish to stop onos before killing it. True for
enable stop , False for disable stop.
Returns:
Returns main.TRUE if successfully killing it.
"""
result = main.TRUE
killResult = self.command( "onosKill",
args=[ "ipAddress" ],
specificDriver=1,
getFrom=0 if killMax else 1,
funcFromCtrl=True )
for i in range( len( killResult ) ):
result = result and killResult[ i ]
self.controllers[ i ].active = False
return result
def ssh( self ):
"""
Description:
set up ssh to the onos
Required:
Returns:
Returns main.TRUE if it successfully setup the ssh to
the onos.
"""
result = main.TRUE
sshResult = self.command( "onosSecureSSH",
kwargs={ "node": "ipAddress" },
specificDriver=1,
getFrom=1,
funcFromCtrl=True )
for sshR in sshResult:
result = result and sshR
return result
def install( self, installMax=True, installParallel=True ):
"""
Description:
Installing onos.
Required:
* installMax - True for installing max number of nodes
False for installing current running nodes only.
Returns:
Returns main.TRUE if it successfully installed
"""
result = main.TRUE
threads = []
i = 0
for ctrl in self.controllers if installMax else self.runningNodes:
options = "-f"
if installMax and i >= self.numCtrls:
options = "-nf"
if installParallel:
t = main.Thread( target=ctrl.Bench.onosInstall,
name="install-" + ctrl.name,
kwargs={ "node" : ctrl.ipAddress,
"options" : options } )
threads.append( t )
t.start()
else:
result = result and \
main.ONOSbench.onosInstall( node=ctrl.ipAddress, options=options )
if installParallel:
for t in threads:
t.join()
result = result and t.result
return result
def startCLIs( self ):
"""
Description:
starting Onos using onosCli driver
Required:
Returns:
Returns main.TRUE if it successfully started.
"""
result = main.TRUE
cliResults = self.command( "startOnosCli",
args=[ "ipAddress" ],
specificDriver=2,
getFrom=1,
funcFromCtrl=True )
for i in range( len( cliResults ) ):
result = result and cliResults[ i ]
self.controllers[ i ].active = True
return result
def printResult( self, results, activeList, logLevel="debug" ):
"""
Description:
Print the value of the list.
Required:
* results - list of the result
* activeList - list of the acitve nodes.
* logLevel - Type of log level you want it to be printed.
Returns:
"""
f = getattr( main.log, logLevel )
for i in range( len( results ) ):
f( activeList[ i ].name + "'s result : " + str( results[ i ] ) )
def allTrueResultCheck( self, results, activeList ):
"""
Description:
check if all the result has main.TRUE.
Required:
* results - list of the result
* activeList - list of the acitve nodes.
Returns:
Returns True if all == main.TRUE else
returns False
"""
self.printResult( results, activeList )
return all( result == main.TRUE for result in results )
def notEmptyResultCheck( self, results, activeList ):
"""
Description:
check if all the result has any contents
Required:
* results - list of the result
* activeList - list of the acitve nodes.
Returns:
Returns True if all the results has
something else returns False
"""
self.printResult( results, activeList )
return all( result for result in results )
def identicalResultsCheck( self, results, activeList ):
"""
Description:
check if all the results has same output.
Required:
* results - list of the result
* activeList - list of the acitve nodes.
Returns:
Returns True if all the results has
same result else returns False
"""
self.printResult( results, activeList )
resultOne = results[ 0 ]
return all( resultOne == result for result in results )
def command( self, function, args=(), kwargs={}, returnBool=False,
specificDriver=0, contentCheck=False, getFrom=2,
funcFromCtrl=False ):
"""
Description:
execute some function of the active nodes.
Required:
* function - name of the function
* args - argument of the function
* kwargs - kwargs of the funciton
* returnBool - True if wish to check all the result has main.TRUE
* specificDriver - specific driver to execute the function. Since
some of the function can be used in different drivers, it is important
to specify which driver it will be executed from.
0 - any type of driver
1 - from bench
2 - from cli
3 - from rest
* contentCheck - If this is True, it will check if the result has some
contents.
* getFrom - from which nodes
2 - active nodes
1 - current running nodes
0 - all nodes
* funcFromCtrl - specific function of the args/kwargs
from each controller from the list of the controllers
Returns:
Returns results if not returnBool and not contentCheck
Returns checkTruthValue of the result if returnBool
Returns resultContent of the result if contentCheck
"""
threads = []
drivers = [ None, "Bench", "CLI", "REST" ]
fromNode = [ self.controllers, self.runningNodes, self.active() ]
results = []
for ctrl in fromNode[ getFrom ]:
try:
funcArgs = []
funcKwargs = {}
f = getattr( ( ctrl if not specificDriver else
getattr( ctrl, drivers[ specificDriver ] ) ), function )
if funcFromCtrl:
if args:
for i in range( len( args ) ):
funcArgs.append( getattr( ctrl, args[ i ] ) )
if kwargs:
for k in kwargs:
funcKwargs.update( { k: getattr( ctrl, kwargs[ k ] ) } )
except AttributeError:
main.log.error( "Function " + function + " not found. Exiting the Test." )
main.cleanAndExit()
t = main.Thread( target=f,
name=function + "-" + ctrl.name,
args=funcArgs if funcFromCtrl else args,
kwargs=funcKwargs if funcFromCtrl else kwargs )
threads.append( t )
t.start()
for t in threads:
t.join()
results.append( t.result )
if returnBool:
return self.allTrueResultCheck( results, fromNode[ getFrom ] )
elif contentCheck:
return self.notEmptyResultCheck( results, fromNode[ getFrom ] )
return results
def checkPartitionSize( self, segmentSize='64', units='M', multiplier='3' ):
# max segment size in bytes: 1024 * 1024 * 64
# multiplier is somewhat arbitrary, but the idea is the logs would have
# been compacted before this many segments are written
maxSize = float( segmentSize ) * float( multiplier )
ret = True
for n in self.runningNodes:
ret = ret and n.server.folderSize( "/opt/onos/apache-karaf-*/data/partitions/*/*.log",
size=maxSize, unit=units, ignoreRoot=False )
return ret