blob: 93f07352d795717be386aca1001ec5fbcd71742a [file] [log] [blame]
"""
Copyright 2016 Open Networking Foundation (ONF)
Please refer questions to either the onos test mailing list at <onos-test@onosproject.org>,
the System Testing Plans and Results wiki page at <https://wiki.onosproject.org/x/voMg>,
or the System Testing Guide page at <https://wiki.onosproject.org/x/WYQg>
TestON is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
TestON is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with TestON. If not, see <http://www.gnu.org/licenses/>.
"""
# Testing the functionality of SDN-IP with single ONOS instance
class USECASE_SdnipFunction:
def __init__( self ):
self.default = ''
global branchName
def CASE100( self, main ):
"""
Start mininet
"""
import os
main.case( "Setup the Mininet testbed" )
main.dependencyPath = main.testDir + \
main.params[ 'DEPENDENCY' ][ 'path' ]
main.topology = main.params[ 'DEPENDENCY' ][ 'topology' ]
main.step( "Starting Mininet Topology" )
topology = main.dependencyPath + main.topology
topoResult = main.Mininet.startNet( topoFile=topology )
utilities.assert_equals( expect=main.TRUE,
actual=topoResult,
onpass="Successfully loaded topology",
onfail="Failed to load topology" )
# Exit if topology did not load properly
if not topoResult:
main.cleanAndExit()
main.step( "Connect switches to controller" )
# connect all switches to controller
swResult = main.TRUE
for i in range ( 1, int( main.params['config']['switchNum'] ) + 1 ):
sw = "sw%s" % ( i )
swResult = swResult and \
main.Mininet.assignSwController( sw, main.Cluster.active( 0 ).ipAddress )
utilities.assert_equals( expect=main.TRUE,
actual=swResult,
onpass="Successfully connect all switches to ONOS",
onfail="Failed to connect all switches to ONOS" )
if not swResult:
main.cleanAndExit()
main.step( "Set up tunnel from Mininet node to onos node" )
forwarding1 = '%s:2000:%s:2000' % ( '1.1.1.2', main.Cluster.active( 0 ).ipAddress )
command = 'ssh -nNT -o "PasswordAuthentication no" \
-o "StrictHostKeyChecking no" -l sdn -L %s %s & ' % \
( forwarding1, main.Cluster.active( 0 ).ipAddress )
tunnelResult = main.TRUE
tunnelResult = main.Mininet.node( "root", command )
utilities.assert_equals( expect=True,
actual=( "PasswordAuthentication" in tunnelResult ),
onpass="Created tunnel succeeded",
onfail="Create tunnel failed" )
if ("PasswordAuthentication" not in tunnelResult) :
main.cleanAndExit()
def CASE101( self, main ):
"""
Package ONOS and install it
Startup sequence:
cell <name>
onos-verify-cell
onos-package
onos-install -f
onos-wait-for-start
"""
import time
import os
try:
from tests.USECASE.dependencies.sdnipBaseFunction import SdnBase
except ImportError:
main.log.error( "sdnBase not found. exiting the test" )
main.cleanAndExit()
try:
main.sdnBase
except ( NameError, AttributeError ):
main.sdnBase = SdnBase()
main.sdnBase.initSetup()
def CASE200( self, main ):
import json
import time
main.case( "Activate sdn-ip application" )
main.log.info( "waiting link discovery......" )
time.sleep( int( main.params['timers']['TopoDiscovery'] ) )
main.log.info( "Get links in the network" )
summaryResult = main.Cluster.active( 0 ).CLI.summary()
linkNum = json.loads( summaryResult )[ "links" ]
listResult = main.Cluster.active( 0 ).CLI.links( jsonFormat=False )
main.log.info( listResult )
if linkNum < 100:
main.log.error( "Link number is wrong!" )
time.sleep( int( main.params['timers']['TopoDiscovery'] ) )
listResult = main.Cluster.active( 0 ).CLI.links( jsonFormat=False )
main.log.info( listResult )
main.cleanAndExit()
main.step( "Activate sdn-ip application" )
activeSDNIPresult = main.Cluster.active( 0 ).CLI.activateApp( "org.onosproject.sdnip" )
utilities.assert_equals( expect=main.TRUE,
actual=activeSDNIPresult,
onpass="Activate SDN-IP succeeded",
onfail="Activate SDN-IP failed" )
if not activeSDNIPresult:
main.log.info( "Activate SDN-IP failed!" )
main.cleanAndExit()
main.log.info( "Wait SDN-IP to finish installing connectivity intents \
and the BGP paths in data plane are ready..." )
time.sleep( int( main.params[ 'timers' ][ 'SdnIpSetup' ] ) )
main.log.info( "Wait Quagga to finish delivery all routes to each \
other and to sdn-ip, plus finish installing all intents..." )
time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
time.sleep( int( main.params[ 'timers' ][ 'PathAvailable' ] ) )
def CASE102( self, main ):
'''
This test case is to load the methods from other Python files.
'''
import imp
main.case( "Loading methods from other Python file" )
# load the methods from other file
wrapperFile = main.params[ 'DEPENDENCY' ][ 'wrapper1' ]
main.Functions = imp.load_source( wrapperFile,
main.dependencyPath +
wrapperFile +
".py" )
def CASE1( self, main ):
'''
ping test from 7 bgp peers to BGP speaker
'''
main.case( "Ping tests between BGP peers and speakers" )
main.Functions.pingSpeakerToPeer( main, speakers=[ "spk1" ],
peers=[ "p64514", "p64515", "p64516" ],
expectAllSuccess=True )
main.Functions.pingSpeakerToPeer( main, speakers=[ "spk2" ],
peers=[ "p64517", "p64518" ],
expectAllSuccess=True )
main.Functions.pingSpeakerToPeer( main, speakers=[ "spk3" ],
peers=[ "p64519", "p64520" ],
expectAllSuccess=True )
def CASE2( self, main ):
'''
point-to-point intents test for each BGP peer and BGP speaker pair
'''
main.sdnBase.pToPIntentTest( 6 )
def CASE3( self, main ):
'''
routes and intents check to all BGP peers
'''
main.case( "Check routes and M2S intents to all BGP peers" )
allRoutesExpected = []
allRoutesExpected.append( "4.0.0.0/24" + "/" + "10.0.4.1" )
allRoutesExpected.append( "5.0.0.0/24" + "/" + "10.0.5.1" )
allRoutesExpected.append( "6.0.0.0/24" + "/" + "10.0.6.1" )
allRoutesExpected.append( "7.0.0.0/24" + "/" + "10.0.7.1" )
allRoutesExpected.append( "8.0.0.0/24" + "/" + "10.0.8.1" )
allRoutesExpected.append( "9.0.0.0/24" + "/" + "10.0.9.1" )
allRoutesExpected.append( "20.0.0.0/24" + "/" + "10.0.20.1" )
main.sdnBase.routeAndIntentCheck( allRoutesExpected, 7 )
def CASE4( self, main ):
'''
Ping test in data plane for each route
'''
main.case( "Ping test for each route, all hosts behind BGP peers" )
#No vlan
main.Functions.pingHostToHost( main,
hosts=[ "h64514", "h64515", "h64516" ],
expectAllSuccess=True )
#vlan 10
main.Functions.pingHostToHost( main,
hosts=[ "h64519", "h64520" ],
expectAllSuccess=True )
# vlan 20
main.Functions.pingHostToHost( main,
hosts=[ "h64517", "h64518" ],
expectAllSuccess=True )
def CASE5( self, main ):
'''
Cut links to peers one by one, check routes/intents
'''
main.sdnBase.linkUpDownCheck( "p64514", "p64515", "p64516",
6, 6, 5, 5, 4, 4,
"spk1", [ "h64514", "h64515", "h64516" ],
"down" )
def CASE6( self, main ):
'''
Recover links to peers one by one, check routes/intents
'''
main.sdnBase.linkUpDownCheck( "p64514", "p64515", "p64516",
5, 5, 6, 6, 7, 7,
"spk1", [ "h64514", "h64515", "h64516" ],
"up" )
def CASE7( self, main ):
'''
Shut down a edge switch, check P-2-P and M-2-S intents, ping test
'''
import time
main.case( "Stop edge sw32,check P-2-P and M-2-S intents, ping test" )
main.step( "Stop sw32" )
result = main.Mininet.switch( SW="sw32", OPTION="stop" )
utilities.assertEquals( expect=main.TRUE, actual=result,
onpass="Stopping switch succeeded!",
onfail="Stopping switch failed!" )
if result == main.TRUE:
time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
main.Functions.checkRouteNum( main, 6 ) #stop one sw, which bring one link between peer and sw down.
main.Functions.checkM2SintentNum( main, 6 )
main.Functions.checkP2PintentNum( main, 36 ) #6 intents from sw to speakers x 6 intents to sw x 2 intents between them
else:
main.log.error( "Stopping switch failed!" )
main.cleanAndExit()
main.step( "Check ping between hosts behind BGP peers" )
result1 = main.Mininet.pingHost( src="h64514", target="h64515" )
result2 = main.Mininet.pingHost( src="h64515", target="h64516" )
result3 = main.Mininet.pingHost( src="h64514", target="h64516" )
pingResult1 = ( result1 == main.FALSE ) and ( result2 == main.TRUE ) \
and ( result3 == main.FALSE )
utilities.assert_equals( expect=True, actual=pingResult1,
onpass="Ping test result is correct",
onfail="Ping test result is wrong" )
if pingResult1 == False:
main.cleanAndExit()
main.step( "Check ping between BGP peers and speakers" )
result4 = main.Mininet.pingHost( src="spk1", target="p64514" )
result5 = main.Mininet.pingHost( src="spk1", target="p64515" )
result6 = main.Mininet.pingHost( src="spk1", target="p64516" )
pingResult2 = ( result4 == main.FALSE ) and ( result5 == main.TRUE ) \
and ( result6 == main.TRUE )
utilities.assert_equals( expect=True, actual=pingResult2,
onpass="Speaker1 ping peers successful",
onfail="Speaker1 ping peers NOT successful" )
if pingResult2 == False:
main.cleanAndExit()
main.step( "Check whether all flow status are ADDED" )
flowCheck = utilities.retry( main.Cluster.active( 0 ).CLI.checkFlowsState,
main.FALSE,
kwargs={'isPENDING':False},
attempts=10 )
utilities.assertEquals( \
expect=main.TRUE,
actual=flowCheck,
onpass="Flow status is correct!",
onfail="Flow status is wrong!" )
def CASE8( self, main ):
'''
Bring up the edge switch (sw32) which was shut down in CASE7,
check P-2-P and M-2-S intents, ping test
'''
import time
main.case( "Start the edge sw32, check P-2-P and M-2-S intents, ping test" )
main.step( "Start sw32" )
result1 = main.Mininet.switch( SW="sw32", OPTION="start" )
utilities.assertEquals( \
expect=main.TRUE,
actual=result1,
onpass="Starting switch succeeded!",
onfail="Starting switch failed!" )
result2 = main.Mininet.assignSwController( "sw32", main.Cluster.active( 0 ).ipAddress )
utilities.assertEquals( \
expect=main.TRUE,
actual=result2,
onpass="Connect switch to ONOS succeeded!",
onfail="Connect switch to ONOS failed!" )
if result1 and result2:
time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
main.Functions.checkRouteNum( main, 7 )
main.Functions.checkM2SintentNum( main, 7 )
main.Functions.checkP2PintentNum( main, 42 )
else:
main.log.error( "Starting switch failed!" )
main.cleanAndExit()
main.step( "Check whether all flow status are ADDED" )
flowCheck = utilities.retry( main.Cluster.active( 0 ).CLI.checkFlowsState,
main.FALSE,
kwargs={'isPENDING':False},
attempts=10 )
utilities.assertEquals( \
expect=main.TRUE,
actual=flowCheck,
onpass="Flow status is correct!",
onfail="Flow status is wrong!" )
# Ping test
main.Functions.pingSpeakerToPeer( main, speakers=["spk1"],
peers=["p64514", "p64515", "p64516"],
expectAllSuccess=True )
main.Functions.pingHostToHost( main,
hosts=["h64514", "h64515", "h64516"],
expectAllSuccess=True )
def CASE9( self, main ):
'''
Bring down a switch in best path, check:
route number, P2P intent number, M2S intent number, ping test
'''
main.case( "Stop sw11 located in best path, \
check route number, P2P intent number, M2S intent number, ping test" )
main.log.info( "Check the flow number correctness before stopping sw11" )
main.Functions.checkFlowNum( main, "sw11", 43 )
main.Functions.checkFlowNum( main, "sw1", 3 )
main.Functions.checkFlowNum( main, "sw7", 34 )
main.log.debug( main.Mininet.checkFlows( "sw11" ) )
main.log.debug( main.Mininet.checkFlows( "sw1" ) )
main.log.debug( main.Mininet.checkFlows( "sw7" ) )
main.step( "Stop sw11" )
result = main.Mininet.switch( SW="sw11", OPTION="stop" )
utilities.assertEquals( expect=main.TRUE, actual=result,
onpass="Stopping switch succeeded!",
onfail="Stopping switch failed!" )
if result:
time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
main.Functions.checkRouteNum( main, 7 )
main.Functions.checkM2SintentNum( main, 7 )
main.Functions.checkP2PintentNum( main, 42 )
else:
main.log.error( "Stopping switch failed!" )
main.cleanAndExit()
main.step( "Check whether all flow status are ADDED" )
flowCheck = utilities.retry( main.Cluster.active( 0 ).CLI.checkFlowsState,
main.FALSE,
kwargs={'isPENDING':False},
attempts=10 )
utilities.assertEquals( \
expect=main.TRUE,
actual=flowCheck,
onpass="Flow status is correct!",
onfail="Flow status is wrong!" )
# Ping test
main.Functions.pingSpeakerToPeer( main, speakers=["spk1"],
peers=["p64514", "p64515", "p64516"],
expectAllSuccess=True )
main.Functions.pingHostToHost( main,
hosts=["h64514", "h64515", "h64516"],
expectAllSuccess=True )
def CASE10( self, main ):
'''
Bring up the switch which was stopped in CASE9, check:
route number, P2P intent number, M2S intent number, ping test
'''
main.case( "Start sw11 which was stopped in CASE9, \
check route number, P2P intent number, M2S intent number, ping test" )
main.log.info( "Check the flow status before starting sw11" )
main.Functions.checkFlowNum( main, "sw1", 33 )
main.Functions.checkFlowNum( main, "sw7", 28 )
main.log.debug( main.Mininet.checkFlows( "sw1" ) )
main.log.debug( main.Mininet.checkFlows( "sw7" ) )
main.step( "Start sw11" )
result1 = main.Mininet.switch( SW="sw11", OPTION="start" )
utilities.assertEquals( expect=main.TRUE, actual=result1,
onpass="Starting switch succeeded!",
onfail="Starting switch failed!" )
result2 = main.Mininet.assignSwController( "sw11", main.Cluster.active( 0 ).ipAddress )
utilities.assertEquals( expect=main.TRUE, actual=result2,
onpass="Connect switch to ONOS succeeded!",
onfail="Connect switch to ONOS failed!" )
if result1 and result2:
time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
main.Functions.checkRouteNum( main, 7 )
main.Functions.checkM2SintentNum( main, 7 )
main.Functions.checkP2PintentNum( main, 42 )
main.log.debug( main.Mininet.checkFlows( "sw11" ) )
main.log.debug( main.Mininet.checkFlows( "sw1" ) )
main.log.debug( main.Mininet.checkFlows( "sw7" ) )
else:
main.log.error( "Starting switch failed!" )
main.cleanAndExit()
main.step( "Check whether all flow status are ADDED" )
flowCheck = utilities.retry( main.Cluster.active( 0 ).CLI.checkFlowsState,
main.FALSE,
kwargs={'isPENDING':False},
attempts=10 )
utilities.assertEquals( \
expect=main.TRUE,
actual=flowCheck,
onpass="Flow status is correct!",
onfail="Flow status is wrong!" )
# Ping test
main.Functions.pingSpeakerToPeer( main, speakers=["spk1"],
peers=["p64514", "p64515", "p64516"],
expectAllSuccess=True )
main.Functions.pingHostToHost( main,
hosts=["h64514", "h64515", "h64516"],
expectAllSuccess=True )