| |
| # Testing the basic functionality of ONOS Next |
| # For sanity and driver functionality excercises only. |
| |
| import time |
| # import sys |
| # import os |
| # import re |
| import json |
| |
| time.sleep( 1 ) |
| |
| |
| class ProdFunc13: |
| |
| def __init__( self ): |
| self.default = '' |
| |
| def CASE1( self, main ): |
| import time |
| """ |
| Startup sequence: |
| cell <name> |
| onos-verify-cell |
| onos-remove-raft-log |
| git pull |
| mvn clean install |
| onos-package |
| onos-install -f |
| onos-wait-for-start |
| """ |
| cellName = main.params[ 'ENV' ][ 'cellName' ] |
| ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ] |
| |
| main.case( "Setting up test environment" ) |
| main.log.report( |
| "This testcase is testing setting up test environment" ) |
| main.log.report( "__________________________________" ) |
| |
| main.step( "Applying cell variable to environment" ) |
| cellResult = main.ONOSbench.setCell( cellName ) |
| verifyResult = main.ONOSbench.verifyCell() |
| |
| main.step( "Removing raft logs before a clen installation of ONOS" ) |
| main.ONOSbench.onosRemoveRaftLogs() |
| |
| main.step( "Git checkout and get version" ) |
| #main.ONOSbench.gitCheckout( "master" ) |
| gitPullResult = main.ONOSbench.gitPull() |
| main.log.info( "git_pull_result = " + str( gitPullResult )) |
| main.ONOSbench.getVersion( report=True ) |
| |
| if gitPullResult == 1: |
| main.step( "Using mvn clean & install" ) |
| main.ONOSbench.cleanInstall() |
| elif gitPullResult == 0: |
| main.log.report( |
| "Git Pull Failed, look into logs for detailed reason" ) |
| main.cleanup() |
| main.exit() |
| |
| main.step( "Creating ONOS package" ) |
| packageResult = main.ONOSbench.onosPackage() |
| |
| main.step( "Installing ONOS package" ) |
| onosInstallResult = main.ONOSbench.onosInstall() |
| if onosInstallResult == main.TRUE: |
| main.log.report( "Installing ONOS package successful" ) |
| else: |
| main.log.report( "Installing ONOS package failed" ) |
| |
| onos1Isup = main.ONOSbench.isup() |
| if onos1Isup == main.TRUE: |
| main.log.report( "ONOS instance is up and ready" ) |
| else: |
| main.log.report( "ONOS instance may not be up" ) |
| |
| main.step( "Starting ONOS service" ) |
| startResult = main.ONOSbench.onosStart( ONOS1Ip ) |
| |
| main.ONOS2.startOnosCli( ONOSIp=main.params[ 'CTRL' ][ 'ip1' ] ) |
| main.step( "Starting Mininet CLI..." ) |
| |
| # Starting the mininet using the old way |
| main.step( "Starting Mininet ..." ) |
| netIsUp = main.Mininet1.startNet() |
| if netIsUp: |
| main.log.info("Mininet CLI is up") |
| |
| case1Result = ( packageResult and |
| cellResult and verifyResult |
| and onosInstallResult and |
| onos1Isup and startResult ) |
| utilities.assert_equals( expect=main.TRUE, actual=case1Result, |
| onpass="Test startup successful", |
| onfail="Test startup NOT successful" ) |
| |
| def CASE2( self, main ): |
| """ |
| Switch Down |
| """ |
| # NOTE: You should probably run a topology check after this |
| import time |
| |
| main.case( "Switch down discovery" ) |
| main.log.report( "This testcase is testing a switch down discovery" ) |
| main.log.report( "__________________________________" ) |
| |
| switchSleep = int( main.params[ 'timers' ][ 'SwitchDiscovery' ] ) |
| |
| description = "Killing a switch to ensure it is discovered correctly" |
| main.log.report( description ) |
| main.case( description ) |
| |
| # TODO: Make this switch parameterizable |
| main.step( "Kill s28 " ) |
| main.log.report( "Deleting s28" ) |
| # FIXME: use new dynamic topo functions |
| main.Mininet1.delSwitch( "s28" ) |
| main.log.info( |
| "Waiting " + |
| str( switchSleep ) + |
| " seconds for switch down to be discovered" ) |
| time.sleep( switchSleep ) |
| # Peek at the deleted switch |
| device = main.ONOS2.getDevice( dpid="0028" ) |
| print "device = ", device |
| if device[ u'available' ] == 'False': |
| case2Result = main.FALSE |
| else: |
| case2Result = main.TRUE |
| utilities.assert_equals( expect=main.TRUE, actual=case2Result, |
| onpass="Switch down discovery successful", |
| onfail="Switch down discovery failed" ) |
| |
| def CASE101( self, main ): |
| """ |
| Cleanup sequence: |
| onos-service <nodeIp> stop |
| onos-uninstall |
| |
| TODO: Define rest of cleanup |
| |
| """ |
| ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ] |
| |
| main.case( "Cleaning up test environment" ) |
| |
| main.step( "Testing ONOS kill function" ) |
| killResult = main.ONOSbench.onosKill( ONOS1Ip ) |
| |
| main.step( "Stopping ONOS service" ) |
| stopResult = main.ONOSbench.onosStop( ONOS1Ip ) |
| |
| main.step( "Uninstalling ONOS service" ) |
| uninstallResult = main.ONOSbench.onosUninstall() |
| |
| case11Result = killResult and stopResult and uninstallResult |
| utilities.assert_equals( expect=main.TRUE, actual=case11Result, |
| onpass="Cleanup successful", |
| onfail="Cleanup failed" ) |
| |
| def CASE3( self, main ): |
| """ |
| Test 'onos' command and its functionality in driver |
| """ |
| ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ] |
| |
| main.case( "Testing 'onos' command" ) |
| |
| main.step( "Sending command 'onos -w <onos-ip> system:name'" ) |
| cmdstr1 = "system:name" |
| cmdResult1 = main.ONOSbench.onosCli( ONOS1Ip, cmdstr1 ) |
| main.log.info( "onos command returned: " + cmdResult1 ) |
| |
| main.step( "Sending command 'onos -w <onos-ip> onos:topology'" ) |
| cmdstr2 = "onos:topology" |
| cmdResult2 = main.ONOSbench.onosCli( ONOS1Ip, cmdstr2 ) |
| main.log.info( "onos command returned: " + cmdResult2 ) |
| |
| def CASE20( self ): |
| """ |
| Exit from mininet cli |
| reinstall ONOS |
| """ |
| cellName = main.params[ 'ENV' ][ 'cellName' ] |
| ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ] |
| |
| main.log.report( "This testcase exits the mininet cli and reinstalls" + |
| "ONOS to switch over to Packet Optical topology" ) |
| main.log.report( "_____________________________________________" ) |
| main.case( "Disconnecting mininet and restarting ONOS" ) |
| main.step( "Disconnecting mininet and restarting ONOS" ) |
| mininetDisconnect = main.Mininet1.disconnect() |
| print "mininetDisconnect = ", mininetDisconnect |
| |
| main.step( "Removing raft logs before a clen installation of ONOS" ) |
| main.ONOSbench.onosRemoveRaftLogs() |
| |
| main.step( "Applying cell variable to environment" ) |
| cellResult = main.ONOSbench.setCell( cellName ) |
| verifyResult = main.ONOSbench.verifyCell() |
| |
| onosInstallResult = main.ONOSbench.onosInstall() |
| if onosInstallResult == main.TRUE: |
| main.log.report( "Installing ONOS package successful" ) |
| else: |
| main.log.report( "Installing ONOS package failed" ) |
| |
| onos1Isup = main.ONOSbench.isup() |
| if onos1Isup == main.TRUE: |
| main.log.report( "ONOS instance is up and ready" ) |
| else: |
| main.log.report( "ONOS instance may not be up" ) |
| |
| main.step( "Starting ONOS service" ) |
| startResult = main.ONOSbench.onosStart( ONOS1Ip ) |
| |
| main.ONOS2.startOnosCli( ONOSIp=main.params[ 'CTRL' ][ 'ip1' ] ) |
| case20Result = mininetDisconnect and cellResult and verifyResult \ |
| and onosInstallResult and onos1Isup and \ |
| startResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case20Result, |
| onpass= "Exiting functionality mininet topology and reinstalling" + |
| " ONOS successful", |
| onfail= "Exiting functionality mininet topology and reinstalling" + |
| " ONOS failed" ) |
| |
| def CASE21( self, main ): |
| """ |
| On ONOS bench, run this command: |
| sudo -E python ~/onos/tools/test/topos/opticalTest.py -OC1 |
| which spawns packet optical topology and copies the links |
| json file to the onos instance. |
| Note that in case of Packet Optical, the links are not learnt |
| from the topology, instead the links are learnt |
| from the json config file |
| """ |
| main.log.report( |
| "This testcase starts the packet layer topology and REST" ) |
| main.log.report( "_____________________________________________" ) |
| main.case( "Starting LINC-OE and other components" ) |
| main.step( "Starting LINC-OE and other components" ) |
| appInstallResult = main.ONOS2.featureInstall( "onos-app-optical" ) |
| opticalMnScript = main.LincOE2.runOpticalMnScript() |
| |
| case21Result = opticalMnScript and appInstallResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case21Result, |
| onpass="Packet optical topology spawned successsfully", |
| onfail="Packet optical topology spawning failed" ) |
| |
| def CASE22( self, main ): |
| """ |
| Curretly we use, 10 optical switches(ROADM's) and |
| 6 packet layer mininet switches each with one host. |
| Therefore, the roadmCount variable = 10, |
| packetLayerSWCount variable = 6, hostCount=6 and |
| links=42. |
| All this is hardcoded in the testcase. If the topology changes, |
| these hardcoded values need to be changed |
| """ |
| main.log.report( |
| "This testcase compares the optical+packet topology against what" + |
| " is expected" ) |
| main.case( "Topology comparision" ) |
| main.step( "Topology comparision" ) |
| main.ONOS3.startOnosCli( ONOSIp=main.params[ 'CTRL' ][ 'ip1' ] ) |
| devicesResult = main.ONOS3.devices( jsonFormat=False ) |
| |
| print "devices_result = ", devicesResult |
| devicesLinewise = devicesResult.split( "\n" ) |
| devicesLinewise = devicesLinewise[ 1: ] |
| roadmCount = 0 |
| packetLayerSWCount = 0 |
| for line in devicesLinewise: |
| components = line.split( "," ) |
| availability = components[ 1 ].split( "=" )[ 1 ] |
| type = components[ 3 ].split( "=" )[ 1 ] |
| if availability == 'true' and type == 'ROADM': |
| roadmCount += 1 |
| elif availability == 'true' and type == 'SWITCH': |
| packetLayerSWCount += 1 |
| if roadmCount == 10: |
| print "Number of Optical Switches = %d and is" % roadmCount +\ |
| " correctly detected" |
| main.log.info( |
| "Number of Optical Switches = " + |
| str( roadmCount ) + |
| " and is correctly detected" ) |
| opticalSWResult = main.TRUE |
| else: |
| print "Number of Optical Switches = %d and is wrong" % roadmCount |
| main.log.info( |
| "Number of Optical Switches = " + |
| str( roadmCount ) + |
| " and is wrong" ) |
| opticalSWResult = main.FALSE |
| |
| if packetLayerSWCount == 6: |
| print "Number of Packet layer or mininet Switches = %d "\ |
| % packetLayerSWCount + "and is correctly detected" |
| main.log.info( |
| "Number of Packet layer or mininet Switches = " + |
| str( packetLayerSWCount ) + |
| " and is correctly detected" ) |
| packetSWResult = main.TRUE |
| else: |
| print "Number of Packet layer or mininet Switches = %d and"\ |
| % packetLayerSWCount + " is wrong" |
| main.log.info( |
| "Number of Packet layer or mininet Switches = " + |
| str( packetLayerSWCount ) + |
| " and is wrong" ) |
| packetSWResult = main.FALSE |
| print "_________________________________" |
| |
| linksResult = main.ONOS3.links( jsonFormat=False ) |
| print "links_result = ", linksResult |
| print "_________________________________" |
| linkActiveCount = linksResult.count("state=ACTIVE") |
| main.log.info( "linkActiveCount = " + str( linkActiveCount )) |
| if linkActiveCount == 42: |
| linkActiveResult = main.TRUE |
| main.log.info( |
| "Number of links in ACTIVE state are correct") |
| else: |
| linkActiveResult = main.FALSE |
| main.log.info( |
| "Number of links in ACTIVE state are wrong") |
| |
| # NOTE:Since only point intents are added, there is no |
| # requirement to discover the hosts |
| # Therfore, the below portion of the code is commented. |
| """ |
| #Discover hosts using pingall |
| pingallResult = main.LincOE2.pingall() |
| |
| hostsResult = main.ONOS3.hosts( jsonFormat=False ) |
| main.log.info( "hosts_result = "+hostsResult ) |
| main.log.info( "_________________________________" ) |
| hostsLinewise = hostsResult.split( "\n" ) |
| hostsLinewise = hostsLinewise[ 1:-1 ] |
| hostCount = 0 |
| for line in hostsLinewise: |
| hostid = line.split( "," )[ 0 ].split( "=" )[ 1 ] |
| hostCount +=1 |
| if hostCount ==2: |
| print "Number of hosts = %d and is correctly detected" %hostCount |
| main.log.info( "Number of hosts = " + str( hostCount ) +" and \ |
| is correctly detected" ) |
| hostDiscovery = main.TRUE |
| else: |
| print "Number of hosts = %d and is wrong" %hostCount |
| main.log.info( "Number of hosts = " + str( hostCount ) +" and \ |
| is wrong" ) |
| hostDiscovery = main.FALSE |
| """ |
| case22Result = opticalSWResult and packetSWResult and \ |
| linkActiveResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case22Result, |
| onpass="Packet optical topology discovery successful", |
| onfail="Packet optical topology discovery failed" ) |
| |
| def CASE23( self, main ): |
| import time |
| """ |
| Add bidirectional point intents between 2 packet layer( mininet ) |
| devices and |
| ping mininet hosts |
| """ |
| main.log.report( |
| "This testcase adds bidirectional point intents between 2 " + |
| "packet layer( mininet ) devices and ping mininet hosts" ) |
| main.case( "Topology comparision" ) |
| main.step( "Adding point intents" ) |
| ptpIntentResult = main.ONOS3.addPointIntent( |
| "of:0000ffffffff0001/1", |
| "of:0000ffffffff0005/1" ) |
| if ptpIntentResult == main.TRUE: |
| main.ONOS3.intents( jsonFormat=False ) |
| main.log.info( "Point to point intent install successful" ) |
| |
| ptpIntentResult = main.ONOS3.addPointIntent( |
| "of:0000ffffffff0005/1", |
| "of:0000ffffffff0001/1" ) |
| if ptpIntentResult == main.TRUE: |
| main.ONOS3.intents( jsonFormat=False ) |
| main.log.info( "Point to point intent install successful" ) |
| |
| time.sleep( 30 ) |
| flowHandle = main.ONOS3.flows() |
| main.log.info( "flows :" + flowHandle ) |
| |
| # Sleep for 30 seconds to provide time for the intent state to change |
| time.sleep( 60 ) |
| intentHandle = main.ONOS3.intents( jsonFormat=False ) |
| main.log.info( "intents :" + intentHandle ) |
| |
| PingResult = main.TRUE |
| count = 1 |
| main.log.info( "\n\nh1 is Pinging h5" ) |
| ping = main.LincOE2.pingHostOptical( src="h1", target="h5" ) |
| # ping = main.LincOE2.pinghost() |
| if ping == main.FALSE and count < 5: |
| count += 1 |
| PingResult = main.FALSE |
| main.log.info( |
| "Ping between h1 and h5 failed. Making attempt number " + |
| str( count ) + |
| " in 2 seconds" ) |
| time.sleep( 2 ) |
| elif ping == main.FALSE: |
| main.log.info( "All ping attempts between h1 and h5 have failed" ) |
| PingResult = main.FALSE |
| elif ping == main.TRUE: |
| main.log.info( "Ping test between h1 and h5 passed!" ) |
| PingResult = main.TRUE |
| else: |
| main.log.info( "Unknown error" ) |
| PingResult = main.ERROR |
| |
| if PingResult == main.FALSE: |
| main.log.report( |
| "Point intents for packet optical have not ben installed" + |
| " correctly. Cleaning up" ) |
| if PingResult == main.TRUE: |
| main.log.report( |
| "Point Intents for packet optical have been " + |
| "installed correctly" ) |
| |
| case23Result = PingResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case23Result, |
| onpass= "Point intents addition for packet optical and" + |
| "Pingall Test successful", |
| onfail= "Point intents addition for packet optical and" + |
| "Pingall Test NOT successful" ) |
| |
| def CASE24( self, main ): |
| import time |
| import json |
| """ |
| LINC uses its own switch IDs. You can use the following |
| command on the LINC console to find the mapping between |
| DPIDs and LINC IDs. |
| rp(application:get_all_key(linc)). |
| |
| Test Rerouting of Packet Optical by bringing a port down |
| ( port 20 ) of a switch( switchID=1, or LincOE switchID =9 ), |
| so that link |
| ( between switch1 port20 - switch5 port50 ) is inactive |
| and do a ping test. If rerouting is successful, |
| ping should pass. also check the flows |
| """ |
| main.log.report( |
| "This testcase tests rerouting and pings mininet hosts" ) |
| main.case( "Test rerouting and pings mininet hosts" ) |
| main.step( "Attach to the Linc-OE session" ) |
| attachConsole = main.LincOE1.attachLincOESession() |
| print "attachConsole = ", attachConsole |
| |
| main.step( "Bring a port down and verify the link state" ) |
| main.LincOE1.portDown( swId="9", ptId="20" ) |
| linksNonjson = main.ONOS3.links( jsonFormat=False ) |
| main.log.info( "links = " + linksNonjson ) |
| |
| linkInactiveCount = linksNonjson.count("state=INACTIVE") |
| main.log.info( "linkInactiveCount = " + str( linkInactiveCount )) |
| if linkInactiveCount == 2: |
| main.log.info( |
| "Number of links in INACTIVE state are correct") |
| else: |
| main.log.info( |
| "Number of links in INACTIVE state are wrong") |
| |
| links = main.ONOS3.links() |
| main.log.info( "links = " + links ) |
| |
| linksResult = json.loads( links ) |
| linksStateResult = main.FALSE |
| for item in linksResult: |
| if item[ 'src' ][ 'device' ] == "of:0000ffffffffff01" and item[ |
| 'src' ][ 'port' ] == "20": |
| if item[ 'dst' ][ 'device' ] == "of:0000ffffffffff05" and item[ |
| 'dst' ][ 'port' ] == "50": |
| linksState = item[ 'state' ] |
| if linksState == "INACTIVE": |
| main.log.info( |
| "Links state is inactive as expected due to one" + |
| " of the ports being down" ) |
| main.log.report( |
| "Links state is inactive as expected due to one" + |
| " of the ports being down" ) |
| linksStateResult = main.TRUE |
| break |
| else: |
| main.log.info( |
| "Links state is not inactive as expected" ) |
| main.log.report( |
| "Links state is not inactive as expected" ) |
| linksStateResult = main.FALSE |
| |
| print "links_state_result = ", linksStateResult |
| time.sleep( 10 ) |
| flowHandle = main.ONOS3.flows() |
| main.log.info( "flows :" + flowHandle ) |
| |
| main.step( "Verify Rerouting by a ping test" ) |
| PingResult = main.TRUE |
| count = 1 |
| main.log.info( "\n\nh1 is Pinging h5" ) |
| ping = main.LincOE2.pingHostOptical( src="h1", target="h5" ) |
| # ping = main.LincOE2.pinghost() |
| if ping == main.FALSE and count < 5: |
| count += 1 |
| PingResult = main.FALSE |
| main.log.info( |
| "Ping between h1 and h5 failed. Making attempt number " + |
| str( count ) + |
| " in 2 seconds" ) |
| time.sleep( 2 ) |
| elif ping == main.FALSE: |
| main.log.info( "All ping attempts between h1 and h5 have failed" ) |
| PingResult = main.FALSE |
| elif ping == main.TRUE: |
| main.log.info( "Ping test between h1 and h5 passed!" ) |
| PingResult = main.TRUE |
| else: |
| main.log.info( "Unknown error" ) |
| PingResult = main.ERROR |
| |
| if PingResult == main.TRUE: |
| main.log.report( "Ping test successful " ) |
| if PingResult == main.FALSE: |
| main.log.report( "Ping test failed" ) |
| |
| case24Result = PingResult and linksStateResult |
| utilities.assert_equals( expect=main.TRUE, actual=case24Result, |
| onpass="Packet optical rerouting successful", |
| onfail="Packet optical rerouting failed" ) |
| |
| def CASE4( self, main ): |
| import re |
| import time |
| main.log.report( "This testcase is testing the assignment of" + |
| " all the switches to all the controllers and" + |
| " discovering the hosts in reactive mode" ) |
| main.log.report( "__________________________________" ) |
| main.case( "Pingall Test" ) |
| main.step( "Assigning switches to controllers" ) |
| ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ] |
| ONOS1Port = main.params[ 'CTRL' ][ 'port1' ] |
| for i in range( 1, 29 ): |
| if i == 1: |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| ip1=ONOS1Ip, |
| port1=ONOS1Port ) |
| elif i >= 2 and i < 5: |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| ip1=ONOS1Ip, |
| port1=ONOS1Port ) |
| elif i >= 5 and i < 8: |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| ip1=ONOS1Ip, |
| port1=ONOS1Port ) |
| elif i >= 8 and i < 18: |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| ip1=ONOS1Ip, |
| port1=ONOS1Port ) |
| elif i >= 18 and i < 28: |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| ip1=ONOS1Ip, |
| port1=ONOS1Port ) |
| else: |
| main.Mininet1.assignSwController( |
| sw=str( i ), |
| ip1=ONOS1Ip, |
| port1=ONOS1Port ) |
| SwitchMastership = main.TRUE |
| for i in range( 1, 29 ): |
| if i == 1: |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| print( "Response is " + str( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response ): |
| SwitchMastership = SwitchMastership and main.TRUE |
| else: |
| SwitchMastership = main.FALSE |
| elif i >= 2 and i < 5: |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| print( "Response is " + str( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response ): |
| SwitchMastership = SwitchMastership and main.TRUE |
| else: |
| SwitchMastership = main.FALSE |
| elif i >= 5 and i < 8: |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| print( "Response is " + str( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response ): |
| SwitchMastership = SwitchMastership and main.TRUE |
| else: |
| SwitchMastership = main.FALSE |
| elif i >= 8 and i < 18: |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| print( "Response is " + str( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response ): |
| SwitchMastership = SwitchMastership and main.TRUE |
| else: |
| SwitchMastership = main.FALSE |
| elif i >= 18 and i < 28: |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| print( "Response is " + str( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response ): |
| SwitchMastership = SwitchMastership and main.TRUE |
| else: |
| SwitchMastership = main.FALSE |
| else: |
| response = main.Mininet1.getSwController( "s" + str( i ) ) |
| print( "Response is" + str( response ) ) |
| if re.search( "tcp:" + ONOS1Ip, response ): |
| SwitchMastership = SwitchMastership and main.TRUE |
| else: |
| SwitchMastership = main.FALSE |
| |
| if SwitchMastership == main.TRUE: |
| main.log.report( "Controller assignmnet successful" ) |
| else: |
| main.log.report( "Controller assignmnet failed" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=SwitchMastership, |
| onpass="MasterControllers assigned correctly" ) |
| """ |
| for i in range ( 1,29 ): |
| main.Mininet1.assignSwController( sw=str( i ),count=5, |
| ip1=ONOS1Ip,port1=ONOS1Port, |
| ip2=ONOS2Ip,port2=ONOS2Port, |
| ip3=ONOS3Ip,port3=ONOS3Port, |
| ip4=ONOS4Ip,port4=ONOS4Port, |
| ip5=ONOS5Ip,port5=ONOS5Port ) |
| """ |
| # REACTIVE FWD test |
| |
| main.step( "Get list of hosts from Mininet" ) |
| hostList = main.Mininet1.getHosts() |
| main.log.info( hostList ) |
| |
| main.step( "Get host list in ONOS format" ) |
| hostOnosList = main.ONOS2.getHostsId( hostList ) |
| main.log.info( hostOnosList ) |
| # time.sleep( 5 ) |
| |
| main.step( "Pingall" ) |
| pingResult = main.FALSE |
| time1 = time.time() |
| pingResult = main.Mininet1.pingall() |
| time2 = time.time() |
| print "Time for pingall: %2f seconds" % ( time2 - time1 ) |
| |
| # Start onos cli again because u might have dropped out of |
| # onos prompt to the shell prompt |
| # if there was no activity |
| main.ONOS2.startOnosCli( ONOSIp=main.params[ 'CTRL' ][ 'ip1' ] ) |
| |
| case4Result = SwitchMastership and pingResult |
| if pingResult == main.TRUE: |
| main.log.report( "Pingall Test in reactive mode to" + |
| " discover the hosts successful" ) |
| else: |
| main.log.report( "Pingall Test in reactive mode to" + |
| " discover the hosts failed" ) |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case4Result, |
| onpass="Controller assignment and Pingall Test successful", |
| onfail="Controller assignment and Pingall Test NOT successful" ) |
| |
| def CASE10( self ): |
| main.log.report( |
| "This testcase uninstalls the reactive forwarding app" ) |
| main.log.report( "__________________________________" ) |
| main.case( "Uninstalling reactive forwarding app" ) |
| # Unistall onos-app-fwd app to disable reactive forwarding |
| appUninstallResult = main.ONOS2.featureUninstall( "onos-app-fwd" ) |
| main.log.info( "onos-app-fwd uninstalled" ) |
| |
| # After reactive forwarding is disabled, the reactive flows on |
| # switches timeout in 10-15s |
| # So sleep for 15s |
| time.sleep( 15 ) |
| |
| flows = main.ONOS2.flows() |
| main.log.info( flows ) |
| |
| case10Result = appUninstallResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case10Result, |
| onpass="Reactive forwarding app uninstallation successful", |
| onfail="Reactive forwarding app uninstallation failed" ) |
| |
| |
| def CASE11( self ): |
| # NOTE: This testcase require reactive forwarding mode enabled |
| # NOTE: in the beginning and then uninstall it before adding |
| # NOTE: point intents. Again the app is installed so that |
| # NOTE: testcase 10 can be ran successively |
| import time |
| main.log.report( |
| "This testcase moves a host from one switch to another to add" + |
| "point intents between them and then perform ping" ) |
| main.log.report( "__________________________________" ) |
| main.log.info( "Moving host from one switch to another" ) |
| main.case( "Moving host from a device and attach it to another device" ) |
| main.step( "Moving host h9 from device s9 and attach it to s8" ) |
| main.Mininet1.moveHost(host = 'h9', oldSw = 's9', newSw = 's8') |
| |
| time.sleep(15) #Time delay to have all the flows ready |
| main.step( "Pingall" ) |
| pingResult = main.FALSE |
| time1 = time.time() |
| pingResult = main.Mininet1.pingall() |
| time2 = time.time() |
| print "Time for pingall: %2f seconds" % ( time2 - time1 ) |
| |
| hosts = main.ONOS2.hosts( jsonFormat = False ) |
| main.log.info( hosts ) |
| |
| main.case( "Uninstalling reactive forwarding app" ) |
| # Unistall onos-app-fwd app to disable reactive forwarding |
| appUninstallResult = main.ONOS2.featureUninstall( "onos-app-fwd" ) |
| main.log.info( "onos-app-fwd uninstalled" ) |
| |
| main.step( "Add point intents between hosts on the same device") |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003008/1", |
| "of:0000000000003008/3" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003008/3", |
| "of:0000000000003008/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| main.case( "Ping hosts on the same devices" ) |
| ping = main.Mininet1.pingHost( src = 'h8', target = 'h9' ) |
| |
| ''' |
| main.case( "Installing reactive forwarding app" ) |
| # Install onos-app-fwd app to enable reactive forwarding |
| appUninstallResult = main.ONOS2.featureInstall( "onos-app-fwd" ) |
| main.log.info( "onos-app-fwd installed" ) |
| ''' |
| |
| if ping == main.FALSE: |
| main.log.report( |
| "Point intents for hosts on same devices haven't" + |
| " been installed correctly. Cleaning up" ) |
| if ping == main.TRUE: |
| main.log.report( |
| "Point intents for hosts on same devices" + |
| "installed correctly. Cleaning up" ) |
| |
| case11Result = ping and pingResult |
| utilities.assert_equals( |
| expect = main.TRUE, |
| actual = case11Result, |
| onpass = "Point intents for hosts on same devices" + |
| "Ping Test successful", |
| onfail = "Point intents for hosts on same devices" + |
| "Ping Test NOT successful" ) |
| |
| |
| def CASE12( self ): |
| """ |
| Verify the default flows on each switch in proactive mode |
| """ |
| main.log.report( "This testcase is verifying num of default" + |
| " flows on each switch" ) |
| main.log.report( "__________________________________" ) |
| main.case( "Verify num of default flows on each switch" ) |
| main.step( "Obtaining the device id's and flowrule count on them" ) |
| |
| case12Result = main.TRUE |
| idList = main.ONOS2.getAllDevicesId() |
| for id in idList: |
| count = main.ONOS2.FlowAddedCount( id ) |
| main.log.info("count = " +count) |
| if int(count) != 3: |
| case12Result = main.FALSE |
| break |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case12Result, |
| onpass = "Expected default num of flows exist", |
| onfail = "Expected default num of flows do not exist") |
| |
| |
| |
| |
| def CASE6( self ): |
| import time |
| main.log.report( "This testcase is testing the addition of" + |
| " host intents and then does pingall" ) |
| main.log.report( "__________________________________" ) |
| main.case( "Obtaining host id's" ) |
| main.step( "Get hosts" ) |
| hosts = main.ONOS2.hosts() |
| main.log.info( hosts ) |
| |
| main.step( "Get all devices id" ) |
| devicesIdList = main.ONOS2.getAllDevicesId() |
| main.log.info( devicesIdList ) |
| |
| # ONOS displays the hosts in hex format unlike mininet which does |
| # in decimal format |
| # So take care while adding intents |
| """ |
| main.step( "Add host-to-host intents for mininet hosts h8 and h18 or |
| ONOS hosts h8 and h12" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:08/-1", "00:00:00:00:00:12/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:09/-1", "00:00:00:00:00:13/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:0A/-1", "00:00:00:00:00:14/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:0B/-1", "00:00:00:00:00:15/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:0C/-1", "00:00:00:00:00:16/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:0D/-1", "00:00:00:00:00:17/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:0E/-1", "00:00:00:00:00:18/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:0F/-1", "00:00:00:00:00:19/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:10/-1", "00:00:00:00:00:1A/-1" ) |
| hthIntentResult = main.ONOS2.addHostIntent( |
| "00:00:00:00:00:11/-1", "00:00:00:00:00:1B/-1" ) |
| print "______________________________________________________" |
| """ |
| for i in range( 8, 18 ): |
| main.log.info( |
| "Adding host intent between h" + str( i ) + |
| " and h" + str( i + 10 ) ) |
| host1 = "00:00:00:00:00:" + \ |
| str( hex( i )[ 2: ] ).zfill( 2 ).upper() |
| host2 = "00:00:00:00:00:" + \ |
| str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper() |
| # NOTE: get host can return None |
| if host1: |
| host1Id = main.ONOS2.getHost( host1 )[ 'id' ] |
| if host2: |
| host2Id = main.ONOS2.getHost( host2 )[ 'id' ] |
| if host1Id and host2Id: |
| main.ONOS2.addHostIntent( host1Id, host2Id ) |
| |
| time.sleep( 10 ) |
| hIntents = main.ONOS2.intents( jsonFormat=False ) |
| main.log.info( "intents:" + hIntents ) |
| flows = main.ONOS2.flows() |
| main.log.info( "flows:" + flows ) |
| |
| count = 1 |
| i = 8 |
| PingResult = main.TRUE |
| # while i<10: |
| while i < 18: |
| main.log.info( |
| "\n\nh" + str( i ) + " is Pinging h" + str( i + 10 ) ) |
| ping = main.Mininet1.pingHost( |
| src="h" + str( i ), target="h" + str( i + 10 ) ) |
| if ping == main.FALSE and count < 5: |
| count += 1 |
| # i = 8 |
| PingResult = main.FALSE |
| main.log.report( "Ping between h" + |
| str( i ) + |
| " and h" + |
| str( i + |
| 10 ) + |
| " failed. Making attempt number " + |
| str( count ) + |
| " in 2 seconds" ) |
| time.sleep( 2 ) |
| elif ping == main.FALSE: |
| main.log.report( "All ping attempts between h" + |
| str( i ) + |
| " and h" + |
| str( i + |
| 10 ) + |
| "have failed" ) |
| i = 19 |
| PingResult = main.FALSE |
| elif ping == main.TRUE: |
| main.log.info( "Ping test between h" + |
| str( i ) + |
| " and h" + |
| str( i + |
| 10 ) + |
| "passed!" ) |
| i += 1 |
| PingResult = main.TRUE |
| else: |
| main.log.info( "Unknown error" ) |
| PingResult = main.ERROR |
| if PingResult == main.FALSE: |
| main.log.report( |
| "Ping all test after Host intent addition failed.Cleaning up" ) |
| # main.cleanup() |
| # main.exit() |
| if PingResult == main.TRUE: |
| main.log.report( |
| "Ping all test after Host intent addition successful" ) |
| |
| case6Result = PingResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case6Result, |
| onpass="Pingall Test after Host intents addition successful", |
| onfail="Pingall Test after Host intents addition failed" ) |
| |
| def CASE5( self, main ): |
| import json |
| # assumes that sts is already in you PYTHONPATH |
| from sts.topology.teston_topology import TestONTopology |
| # main.ONOS2.startOnosCli( ONOSIp=main.params[ 'CTRL' ][ 'ip1' ] ) |
| main.log.report( "This testcase is testing if all ONOS nodes" + |
| " are in topology sync with mininet" ) |
| main.log.report( "__________________________________" ) |
| main.case( "Comparing Mininet topology with the topology of ONOS" ) |
| main.step( "Start continuous pings" ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source1' ], |
| target=main.params[ 'PING' ][ 'target1' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source2' ], |
| target=main.params[ 'PING' ][ 'target2' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source3' ], |
| target=main.params[ 'PING' ][ 'target3' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source4' ], |
| target=main.params[ 'PING' ][ 'target4' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source5' ], |
| target=main.params[ 'PING' ][ 'target5' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source6' ], |
| target=main.params[ 'PING' ][ 'target6' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source7' ], |
| target=main.params[ 'PING' ][ 'target7' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source8' ], |
| target=main.params[ 'PING' ][ 'target8' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source9' ], |
| target=main.params[ 'PING' ][ 'target9' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( |
| src=main.params[ 'PING' ][ 'source10' ], |
| target=main.params[ 'PING' ][ 'target10' ], |
| pingTime=500 ) |
| |
| main.step( "Create TestONTopology object" ) |
| global ctrls |
| ctrls = [] |
| count = 1 |
| while True: |
| temp = () |
| if ( 'ip' + str( count ) ) in main.params[ 'CTRL' ]: |
| temp = temp + ( getattr( main, ( 'ONOS' + str( count ) ) ), ) |
| temp = temp + ( "ONOS" + str( count ), ) |
| temp = temp + ( main.params[ 'CTRL' ][ 'ip' + str( count ) ], ) |
| temp = temp + \ |
| ( eval( main.params[ 'CTRL' ][ 'port' + str( count ) ] ), ) |
| ctrls.append( temp ) |
| count = count + 1 |
| else: |
| break |
| global MNTopo |
| Topo = TestONTopology( |
| main.Mininet1, |
| ctrls ) # can also add Intent API info for intent operations |
| MNTopo = Topo |
| |
| TopologyCheck = main.TRUE |
| main.step( "Compare ONOS Topology to MN Topology" ) |
| devicesJson = main.ONOS2.devices() |
| linksJson = main.ONOS2.links() |
| # portsJson = main.ONOS2.ports() |
| |
| result1 = main.Mininet1.compareSwitches( |
| MNTopo, |
| json.loads( devicesJson ) ) |
| result2 = main.Mininet1.compareLinks( |
| MNTopo, |
| json.loads( linksJson ) ) |
| # result3 = main.Mininet1.comparePorts( |
| # MNTopo, json.loads( portsJson ) ) |
| |
| # result = result1 and result2 and result3 |
| result = result1 and result2 |
| |
| print "***********************" |
| if result == main.TRUE: |
| main.log.report( "ONOS" + " Topology matches MN Topology" ) |
| else: |
| main.log.report( "ONOS" + " Topology does not match MN Topology" ) |
| |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=result, |
| onpass="ONOS" + |
| " Topology matches MN Topology", |
| onfail="ONOS" + |
| " Topology does not match MN Topology" ) |
| |
| TopologyCheck = TopologyCheck and result |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=TopologyCheck, |
| onpass="Topology checks passed", |
| onfail="Topology checks failed" ) |
| |
| def CASE7( self, main ): |
| from sts.topology.teston_topology import TestONTopology |
| |
| linkSleep = int( main.params[ 'timers' ][ 'LinkDiscovery' ] ) |
| |
| main.log.report( "This testscase is killing a link to ensure that" + |
| " link discovery is consistent" ) |
| main.log.report( "__________________________________" ) |
| main.log.report( "Killing a link to ensure that link discovery" + |
| " is consistent" ) |
| main.case( "Killing a link to Ensure that Link Discovery" + |
| "is Working Properly" ) |
| """ |
| main.step( "Start continuous pings" ) |
| |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source1' ], |
| target=main.params[ 'PING' ][ 'target1' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source2' ], |
| target=main.params[ 'PING' ][ 'target2' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source3' ], |
| target=main.params[ 'PING' ][ 'target3' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source4' ], |
| target=main.params[ 'PING' ][ 'target4' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source5' ], |
| target=main.params[ 'PING' ][ 'target5' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source6' ], |
| target=main.params[ 'PING' ][ 'target6' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source7' ], |
| target=main.params[ 'PING' ][ 'target7' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source8' ], |
| target=main.params[ 'PING' ][ 'target8' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source9' ], |
| target=main.params[ 'PING' ][ 'target9' ], |
| pingTime=500 ) |
| main.Mininet2.pingLong( src=main.params[ 'PING' ][ 'source10' ], |
| target=main.params[ 'PING' ][ 'target10' ], |
| pingTime=500 ) |
| """ |
| main.step( "Determine the current number of switches and links" ) |
| topologyOutput = main.ONOS2.topology() |
| topologyResult = main.ONOS1.getTopology( topologyOutput ) |
| activeSwitches = topologyResult[ 'deviceCount' ] |
| links = topologyResult[ 'linkCount' ] |
| print "activeSwitches = ", type( activeSwitches ) |
| print "links = ", type( links ) |
| main.log.info( |
| "Currently there are %s switches and %s links" % |
| ( str( activeSwitches ), str( links ) ) ) |
| |
| main.step( "Kill Link between s3 and s28" ) |
| main.Mininet1.link( END1="s3", END2="s28", OPTION="down" ) |
| time.sleep( linkSleep ) |
| topologyOutput = main.ONOS2.topology() |
| LinkDown = main.ONOS1.checkStatus( |
| topologyOutput, activeSwitches, str( |
| int( links ) - 2 ) ) |
| if LinkDown == main.TRUE: |
| main.log.report( "Link Down discovered properly" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=LinkDown, |
| onpass="Link Down discovered properly", |
| onfail="Link down was not discovered in " + |
| str( linkSleep ) + |
| " seconds" ) |
| |
| # Check ping result here..add code for it |
| |
| main.step( "Bring link between s3 and s28 back up" ) |
| LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" ) |
| time.sleep( linkSleep ) |
| topologyOutput = main.ONOS2.topology() |
| LinkUp = main.ONOS1.checkStatus( |
| topologyOutput, |
| activeSwitches, |
| str( links ) ) |
| if LinkUp == main.TRUE: |
| main.log.report( "Link up discovered properly" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=LinkUp, |
| onpass="Link up discovered properly", |
| onfail="Link up was not discovered in " + |
| str( linkSleep ) + |
| " seconds" ) |
| |
| # NOTE Check ping result here..add code for it |
| |
| main.step( "Compare ONOS Topology to MN Topology" ) |
| Topo = TestONTopology( |
| main.Mininet1, |
| ctrls ) # can also add Intent API info for intent operations |
| MNTopo = Topo |
| TopologyCheck = main.TRUE |
| |
| devicesJson = main.ONOS2.devices() |
| linksJson = main.ONOS2.links() |
| portsJson = main.ONOS2.ports() |
| |
| result1 = main.Mininet1.compareSwitches( |
| MNTopo, |
| json.loads( devicesJson ) ) |
| result2 = main.Mininet1.compareLinks( |
| MNTopo, |
| json.loads( linksJson ) ) |
| # result3 = main.Mininet1.comparePorts( |
| # MNTopo, json.loads( portsJson ) ) |
| |
| # result = result1 and result2 and result3 |
| result = result1 and result2 |
| print "***********************" |
| |
| if result == main.TRUE: |
| main.log.report( "ONOS" + " Topology matches MN Topology" ) |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=result, |
| onpass="ONOS" + |
| " Topology matches MN Topology", |
| onfail="ONOS" + |
| " Topology does not match MN Topology" ) |
| |
| TopologyCheck = TopologyCheck and result |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=TopologyCheck, |
| onpass="Topology checks passed", |
| onfail="Topology checks failed" ) |
| |
| result = LinkDown and LinkUp and TopologyCheck |
| utilities.assert_equals( expect=main.TRUE, actual=result, |
| onpass="Link failure is discovered correctly", |
| onfail="Link Discovery failed" ) |
| |
| def CASE8( self ): |
| """ |
| Intent removal |
| """ |
| import time |
| main.log.report( "This testcase removes any previously added intents" + |
| " before adding any new set of intents" ) |
| main.log.report( "__________________________________" ) |
| main.log.info( "intent removal" ) |
| main.case( "Removing installed intents" ) |
| main.step( "Obtain the intent id's" ) |
| intentResult = main.ONOS2.intents( jsonFormat=False ) |
| main.log.info( "intent_result = " + intentResult ) |
| intentLinewise = intentResult.split( "\n" ) |
| |
| intentList = [line for line in intentLinewise \ |
| if line.startswith( "id=")] |
| intentids = [line.split( "," )[ 0 ].split( "=" )[ 1 ] for line in \ |
| intentList] |
| for id in intentids: |
| print "id = ", id |
| |
| main.step( |
| "Iterate through the intentids list and remove each intent" ) |
| for id in intentids: |
| main.ONOS2.removeIntent( intentId=id ) |
| |
| intentResult = main.ONOS2.intents( jsonFormat=False ) |
| main.log.info( "intent_result = " + intentResult ) |
| |
| intentList = [line for line in intentResult.split( "\n" ) \ |
| if line.startswith( "id=")] |
| intentState = [line.split( "," )[ 1 ].split( "=" )[ 1 ] for line in \ |
| intentList] |
| for state in intentState: |
| print state |
| |
| case8Result = main.TRUE |
| for state in intentState: |
| if state != 'WITHDRAWN': |
| case8Result = main.FALSE |
| break |
| |
| if case8Result == main.TRUE: |
| main.log.report( "Intent removal successful" ) |
| else: |
| main.log.report( "Intent removal failed" ) |
| |
| PingResult = main.TRUE |
| if case8Result == main.TRUE: |
| i = 8 |
| while i < 18: |
| main.log.info( |
| "\n\nh" + str( i ) + " is Pinging h" + str( i + 10 ) ) |
| ping = main.Mininet1.pingHost( |
| src="h" + str( i ), target="h" + str( i + 10 ) ) |
| if ping == main.TRUE: |
| i = 19 |
| PingResult = PingResult and main.TRUE |
| elif ping == main.FALSE: |
| i += 1 |
| PingResult = PingResult and main.FALSE |
| else: |
| main.log.info( "Unknown error" ) |
| PingResult = main.ERROR |
| |
| # Note: If the ping result failed, that means the intents have been |
| # withdrawn correctly. |
| if PingResult == main.TRUE: |
| main.log.report( "Installed intents have not been withdrawn correctly" ) |
| # main.cleanup() |
| # main.exit() |
| if PingResult == main.FALSE: |
| main.log.report( "Installed intents have been withdrawn correctly" ) |
| |
| case8Result = case8Result and PingResult |
| |
| if case8Result == main.FALSE: |
| main.log.report( "Intent removal successful" ) |
| else: |
| main.log.report( "Intent removal failed" ) |
| |
| utilities.assert_equals( expect=main.FALSE, actual=case8Result, |
| onpass="Intent removal test passed", |
| onfail="Intent removal test failed" ) |
| |
| def CASE9( self ): |
| main.log.report( |
| "This testcase adds point intents and then does pingall" ) |
| main.log.report( "__________________________________" ) |
| main.log.info( "Adding point intents" ) |
| main.case( |
| "Adding bidirectional point for mn hosts" + |
| "( h8-h18, h9-h19, h10-h20, h11-h21, h12-h22, " + |
| "h13-h23, h14-h24, h15-h25, h16-h26, h17-h27 )" ) |
| |
| main.step( "Add point intents for mn hosts h8 and h18 or" + |
| "ONOS hosts h8 and h12" ) |
| # main.step(var1) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003008/1", |
| "of:0000000000006018/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006018/1", |
| "of:0000000000003008/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var2 = "Add point intents for mn hosts h9&h19 or ONOS hosts h9&h13" |
| main.step(var2) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003009/1", |
| "of:0000000000006019/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006019/1", |
| "of:0000000000003009/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var3 = "Add point intents for MN hosts h10&h20 or ONOS hosts hA&h14" |
| main.step(var3) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003010/1", |
| "of:0000000000006020/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006020/1", |
| "of:0000000000003010/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var4 = "Add point intents for mininet hosts h11 and h21 or" +\ |
| " ONOS hosts hB and h15" |
| main.case(var4) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003011/1", |
| "of:0000000000006021/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006021/1", |
| "of:0000000000003011/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var5 = "Add point intents for mininet hosts h12 and h22 " +\ |
| "ONOS hosts hC and h16" |
| main.case(var5) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003012/1", |
| "of:0000000000006022/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006022/1", |
| "of:0000000000003012/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var6 = "Add point intents for mininet hosts h13 and h23 or" +\ |
| " ONOS hosts hD and h17" |
| main.case(var6) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003013/1", |
| "of:0000000000006023/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006023/1", |
| "of:0000000000003013/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var7 = "Add point intents for mininet hosts h14 and h24 or" +\ |
| " ONOS hosts hE and h18" |
| main.case(var7) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003014/1", |
| "of:0000000000006024/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006024/1", |
| "of:0000000000003014/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var8 = "Add point intents for mininet hosts h15 and h25 or" +\ |
| " ONOS hosts hF and h19" |
| main.case(var8) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003015/1", |
| "of:0000000000006025/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006025/1", |
| "of:0000000000003015/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var9 = "Add intents for mininet hosts h16 and h26 or" +\ |
| " ONOS hosts h10 and h1A" |
| main.case(var9) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003016/1", |
| "of:0000000000006026/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006026/1", |
| "of:0000000000003016/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| # main.log.info( getIntentResult ) |
| |
| var10 = "Add point intents for mininet hosts h17 and h27 or" +\ |
| " ONOS hosts h11 and h1B" |
| main.case(var10) |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000003017/1", |
| "of:0000000000006027/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| #main.log.info( getIntentResult ) |
| |
| ptpIntentResult = main.ONOS2.addPointIntent( |
| "of:0000000000006027/1", |
| "of:0000000000003017/1" ) |
| if ptpIntentResult == main.TRUE: |
| getIntentResult = main.ONOS2.intents() |
| main.log.info( "Point to point intent install successful" ) |
| #main.log.info( getIntentResult ) |
| |
| print( |
| "___________________________________________________________" ) |
| |
| flowHandle = main.ONOS2.flows() |
| #main.log.info( "flows :" + flowHandle ) |
| |
| count = 1 |
| i = 8 |
| PingResult = main.TRUE |
| while i < 18: |
| main.log.info( |
| "\n\nh" + str( i ) + " is Pinging h" + str( i + 10 ) ) |
| ping = main.Mininet1.pingHost( |
| src="h" + str( i ), target="h" + str( i + 10 ) ) |
| if ping == main.FALSE and count < 5: |
| count += 1 |
| # i = 8 |
| PingResult = main.FALSE |
| main.log.report( "Ping between h" + |
| str( i ) + |
| " and h" + |
| str( i + |
| 10 ) + |
| " failed. Making attempt number " + |
| str( count ) + |
| " in 2 seconds" ) |
| time.sleep( 2 ) |
| elif ping == main.FALSE: |
| main.log.report( "All ping attempts between h" + |
| str( i ) + |
| " and h" + |
| str( i + |
| 10 ) + |
| "have failed" ) |
| i = 19 |
| PingResult = main.FALSE |
| elif ping == main.TRUE: |
| main.log.info( "Ping test between h" + |
| str( i ) + |
| " and h" + |
| str( i + |
| 10 ) + |
| "passed!" ) |
| i += 1 |
| PingResult = main.TRUE |
| else: |
| main.log.info( "Unknown error" ) |
| PingResult = main.ERROR |
| |
| if PingResult == main.FALSE: |
| main.log.report( |
| "Point intents have not ben installed correctly. Cleaning up" ) |
| # main.cleanup() |
| # main.exit() |
| if PingResult == main.TRUE: |
| main.log.report( "Point Intents have been installed correctly" ) |
| |
| case9Result = PingResult |
| utilities.assert_equals( |
| expect=main.TRUE, |
| actual=case9Result, |
| onpass="Point intents addition and Pingall Test successful", |
| onfail="Point intents addition and Pingall Test NOT successful" ) |