Gitiles
Code Review Sign In
gerrit.onosproject.org / routing / f28b53ce95dd07fd14d3635ce282dfddffc090db / . / trellis
tree: 263b5155ea3c322122562e08fe6d3f61345323ef [path history] [tgz]
  1. README.md
  2. Vagrantfile
  3. bgpdbgp1.conf
  4. bgpdbgp2.conf
  5. bgpdr1.conf
  6. bgpdr2.conf
  7. dhcpd.conf
  8. dhcpd6.conf
  9. trellis.json
  10. trellis.py
  11. trellis_dualhome.json
  12. trellis_dualhome.py
  13. trellis_duallink.json
  14. trellis_duallink.py
  15. trellis_hag.json
  16. trellis_hag.py
  17. trellis_remote_dhcp.json
  18. trellis_remote_dhcp.py
  19. trellis_vlan.json
  20. trellis_vlan.py
  21. trellislib.py
  22. trellisp4.json
  23. trellisp4.py
trellis/README.md

Trellis Leaf-Spine Fabric

Introduction

This folder contains Mininet scripts and corresponding config files that can be used to emulate Trellis leaf-spine fabric, vRouter and DHCP relay. Current Mininet setup only works with ONOS 1.11 and above. We recommend you use the tip of 1.11 branch.

Download

git clone https://gerrit.onosproject.org/routing

Manual Installation

Ubuntu 16.04 LTS

Some dependencies need to be installed for a fresh Ubuntu.

sudo apt-get update
sudo apt-get install -y gawk texinfo python-pip build-essential iptables automake autoconf libtool
sudo pip install -U pip
sudo pip install ipaddress

Mininet

sudo apt-get install mininet

OpenvSwitch

Mininet should install OVS for you. Please run sudo ovs-vsctl --version and make sure the OVS version is above 2.5.0+.

DHCP server

sudo apt-get install isc-dhcp-server

Quagga

Trellis needs a special FPM patch for Quagga.

In order to start the quagga related daemons, you should create a user quagga and set the correct read/write permission to local state directory(--localstatedir) and configuration directory(--sysconfdir).

git clone -b onos-1.11 https://gerrit.opencord.org/quagga
cd quagga
./bootstrap.sh
./configure --enable-fpm --sbindir=/usr/lib/quagga
make
sudo make install
cd ..

ONOS - Installation

Learn about how to setup ONOS at: https://wiki.onosproject.org/. After installation, the following ONOS apps need to be activated.

export ONOS_APPS=drivers,openflow,segmentrouting,fpm,dhcprelay,netcfghostprovider,routeradvertisement,mcast

ONOS - Network Config

onos-netcfg <onos-ip> routing/trellis/trellis.json

Disable/Modify AppArmor

The apparmor will set dhcpd in enforce mode. We will need to disable the profile.

sudo ln -s /etc/apparmor.d/usr.sbin.dhcpd /etc/apparmor.d/disable/
sudo apparmor_parser -R /etc/apparmor.d/usr.sbin.dhcpd

The apparmor rules of dhclient will restrict the dhclient to write files to directory /var/lib/. We need to modify the rules of dhclient profile and restart the apparmor.

sudo /etc/init.d/apparmor stop
sudo sed -i '30i  /var/lib/dhcp{,3}/dhcpclient* lrw,' /etc/apparmor.d/sbin.dhclient
sudo /etc/init.d/apparmor start

Start Mininet Emulation

cd routing/trellis
sudo ./trellis.py --controllers ONOS_CONTROLLER_IP1,ONOS_CONTROLLER_IP2,...,ONOS_CONTROLLER_IPN

Verify Network Connectivity

In Mininet, run

  • h1 ping 10.0.99.2 to check IPv4 connectivity
  • h1v6 ping6 2000::9902 to check IPv6 connectivity

Vagrant

We also provide a mininet VM image supported by Vagrant file. In that VM environment, you only need to modify the IP address of ONOS controller for trellis.py and zebradbgp*.conf.

In order to use the Vagrant, make sure you have already installed the Vagrant in your environment.

Start the VM

vagrant up

Start the ONOS

Start the ONOS controller and set the config via onos-netcfg on the other host.

Operate the VM

Type the following command to ssh into the VM environment.

vagrant ssh

Now start mininet to test

cd routing/trellis
sudo ./trellis.py --controllers ONOS_CONTROLLER_IP1,ONOS_CONTROLLER_IP2,...,ONOS_CONTROLLER_IPN

Troubleshooting

  • Services in the emulated hosts may still be alive if Mininet is not terminated properly. In that case, simply run the following command to clean up.
sudo killall -9 dhclient dhcpd zebra bgpd
sudo mn -c