ONOS+P4 Tutorial: Exercise 1

The goal of this exercise is to introduce P4 and P4Runtime support in ONOS, along with the tools to practically experiment with it. This integration allows existing applications in ONOS to communicate to and program P4 devices on the network, and to operate in a pipeline agnostic manner, i.e. independently of the P4 program.

To run this exercise you will need multiple terminal windows (or tabs) to operate with the CLI of Mininet, ONOS, and BMv2. We use the following convention to distinguish between commands of different CLIs:

Commands starting with $ are intended to be executed in the Ubuntu terminal prompt;
onos> for commands in the ONOS CLI;
mininet> for the Mininet CLI;
RuntimeCmd: for the BMv2 CLI.

Exercise steps

On terminal window 1, start ONOS with a small subset of the applications by executing the following command:
```
$ cd $ONOS_ROOT
$ ONOS_APPS=proxyarp,hostprovider,lldpprovider ok clean
```
The $ONOS_ROOT environment variable points to the root ONOS directory. The ok command is an alias to run ONOS locally in your dev machine. Please note that if this the first time you run ONOS on this machine, or if you haven't built ONOS before, it can take some time (5-10 minutes depending on your Internet speed).
Once ONOS has started you should see log messages being print on the screen.
On terminal window 2, activate the BMv2 driver and tutorial pipeconf via the ONOS CLI.
1. Use the following command to access the ONOS CLI:
```
$ onos localhost
```
2. Enter the following command to activate the BMv2 driver:
```
onos> app activate org.onosproject.drivers.bmv2
```
  You should see the following message on the ONOS log:
```
Application org.onosproject.drivers.bmv2 has been activated
```
3. Enter the following command to activate the pipeconf:
```
onos> app activate org.onosproject.p4tutorial.pipeconf
```
  You should see the following messages on the log:
```
New pipeconf registered: p4-tutorial-pipeconf
Application org.onosproject.p4tutorial.pipeconf has been activated
```
  Note the specific name used for this pipeconf p4-tutorial-pipeconf. We will later use this name to tell ONOS to deploy that specific P4 program to the switches.
4. To verify that you have activated all the required apps, run the following command:
```
onos> apps -a -s
```
  Make sure you see the following list of applications displayed:
```
org.onosproject.generaldeviceprovider ... General Device Provider
org.onosproject.drivers               ... Default Drivers
org.onosproject.proxyarp              ... Proxy ARP/NDP
org.onosproject.lldpprovider          ... LLDP Link Provider
org.onosproject.protocols.grpc        ... gRPC Protocol Subsystem
org.onosproject.protocols.p4runtime   ... P4Runtime Protocol Subsystem
org.onosproject.p4runtime             ... P4Runtime Provider
org.onosproject.drivers.p4runtime     ... P4Runtime Drivers
org.onosproject.hostprovider          ... Host Location Provider
org.onosproject.drivers.bmv2          ... BMv2 Drivers
org.onosproject.p4tutorial.pipeconf   ... P4 Tutorial Pipeconf
```
5. (optional) Change flow rule polling interval. Run the following command in the ONOS CLI:
```
onos> cfg set org.onosproject.net.flow.impl.FlowRuleManager fallbackFlowPollFrequency 5
```
  This command tells ONOS to check the state of flow rules on switches every 5 seconds (default is 30). This is used to obtain more often flow rules stats such as byte/packet counters. It helps also resolving more quickly issues where some flow rules are installed in the ONOS store but not on the device (which can often happen when emulating a large number of devices in the same VM).
On terminal window 3, run Mininet to set up a topology of BMv2 devices.
1. To run Mininet, use the following command:
```
$ sudo -E mn --custom $BMV2_MN_PY --switch onosbmv2,pipeconf=p4-tutorial-pipeconf --controller remote,ip=127.0.0.1
```
  The --custom argument tells Mininet to use the bmv2.py custom script to execute the BMv2 switch. The environment variable $BMV2_MN_PY points to the exact location of the script (you can use the command echo $BMV2_MN_PY to find out the location).
  The --switch argument specifies the kind of switch instance we want to run inside Mininet. In this case we are running a version of BMv2 that also produces some configuration files used by ONOS to discover the device (see steps below), hence the name onosbmv2. The pipeconf sub-argument is used to tell ONOS which pipeconf to deploy on all devices.
  If needed, you can run BMv2 with debug logging enabled by passing the sub-argument loglevel=debug. For example:
```
$ sudo -E mn [...] --switch onosbmv2,loglevel=debug,pipeconf=p4-tutorial-pipeconf [...]
```
2. A set of files are generated in the /tmp folder as part of this startup process, to view them (on a separate terminal window):
```
$ ls /tmp
```
3. You will find ONOS netcfg JSON files in this folder for each BMv2 switch, open this file up, for example:
```
$ cat /tmp/bmv2-1-netcfg.json
```
  It contains the configuration for (1) the gRPC server and port used by the BMv2 switch process for the P4Runtime service, (2) the ID of pipeconf to deploy on the device, (3) switch ports details, and other driver-specific information.
  This file is pushed to ONOS automatically by Mininet when executing the switch instance. If everything went as expected, you should see the ONOS log populating with messages like:
```
Connecting to device device:bmv2:1 with driver bmv2
[...]
Setting pipeline config for device:bmv2:1 to p4-tutorial-pipeconf...
[...]
Device device:bmv2:1 connected
[...]
```
4. Check the BMv2 switch instance log:
```
$ less /tmp/bmv2-1-log
```
  By scrolling the BMv2 log, you should see a number of P4Runtime messages processed by the switch. These messages are used to install table entries and to read counters. You should also see many PACKET_IN and PACKET_OUT messages corresponding to packet-in/out processed by the switch and used for LLDP-based link discovery.
  Table entry messages are generated by ONOS according to the flow rules generated by each application and based on the P4Info associated with the p4-tutorial-pipeconf.
  If you prefer to watch the BMv2 log updating in real time, you can use the following command to print on screen all new messages:
```
$ bm-log 1
```
  This command will show the log of the switch instance with ID "1". Such ID was specified when starting the simple_switch_grpc process (look in the Mininet output for Starting BMv2 target: simple_switch_grpc --device-id 1 [...]).
5. Check the flow rules inserted by each application in ONOS. In the ONOS CLI type:
```
onos> flows -s
```
  You should see 3 flow rules:
```
deviceId=device:bmv2:1, flowRuleCount=3
    ADDED, bytes=0, packets=0, table=0, priority=40000, selector=[ETH_TYPE:arp], treatment=[immediate=[OUTPUT:CONTROLLER], clearDeferred]
    ADDED, bytes=0, packets=0, table=0, priority=40000, selector=[ETH_TYPE:bddp], treatment=[immediate=[OUTPUT:CONTROLLER], clearDeferred]
    ADDED, bytes=0, packets=0, table=0, priority=40000, selector=[ETH_TYPE:lldp], treatment=[immediate=[OUTPUT:CONTROLLER], clearDeferred]
```
  These flow rules are installed automatically for each device by the Proxy ARP and LLDP Link Discovery applications. The first one is used to intercept ARP requests (selector=[ETH_TYPE:arp]), which are sent to the controller (treatment=[immediate=[OUTPUT:CONTROLLER]), who in turn will reply with an ARP response or broadcast the requests to all hosts. The other two flow rules are used to intercept LLDP and BBDP packets (for the purpose of link discovery).
  These flow rules appear to be installed on table "0". This is a logical table number mapped by the pipeconf's interpreter to the P4 table named t_l2_fwd in mytunnel.p4 (line 191).
  This mapping is defined in PipelineInterpreterImpl.java (line 103)
6. Compare ONOS flow rules to the table entries installed on the BMv2 switch.
  We can use the BMv2 CLI to dump all table entries currently installed on the switch. On a separate terminal window type:
```
 $ bm-cli 1
```
  This will start the CLI for the BMv2 switch instance with ID "1" (where the ID can be derived in the same way as for the bm-log command).
  On the BMv2 CLI prompt, type the following command:
```
RuntimeCmd: table_dump c_ingress.t_l2_fwd
```
  You should see exactly 3 entries, each one corresponding to a flow rule in ONOS. For example, the flow rule matching on ARP packets should look like this in the BMv2 CLI:
```
...
**********
Dumping entry 0x2000002
Match key:
* standard_metadata.ingress_port: TERNARY   0000 &&& 0000
* ethernet.dst_addr             : TERNARY   000000000000 &&& 000000000000
* ethernet.src_addr             : TERNARY   000000000000 &&& 000000000000
* ethernet.ether_type           : TERNARY   0806 &&& ffff
Priority: 16737216
Action entry: c_ingress.send_to_cpu -
...
```
  Note how the ONOS selector [ETH_TYPE:arp] has been translated to an entry matching only the header field ethernet.ether_type, while the bits of all other fields are set as "don't care" (mask is all zeros). While the ONOS treatment [OUTPUT:CONTROLLER] has been translated to the action c_ingress.send_to_cpu.
  Important: The BMv2 CLI is a powerful tool to debug the state of a BMv2 switch. Type help to show a list of possible commands. This CLI provides also auto-completion when pressing the tab key.
It is finally time to test connectivity between the hosts of our Mininet network.
1. On the Mininet prompt, start a ping between host1 and host2:
```
mininet> h1 ping h2
```
  The ping should NOT work, and the reason is that we did not activate yet any ONOS application providing connectivity between hosts.
2. While leaving the ping running on Mininet, activate the Reactive Forwarding application using the ONOS CLI:
```
onos> app activate org.onosproject.fwd
```
  Once activated, you should see the the ping working. Indeed, this application installs the necessary flow rules to forward packets between the two hosts.
3. Use steps 3.v and 3.vi to check the new flow rules.
  You should see 3 new flow rules.
  The Reactive Forwarding application works in the following way. It installs a low priority flow objective to intercepts all IPv4 packets via a send_to_cpu action ([OUTPUT:CONTROLLER] in ONOS) When a packet is received by the control plane, the packet is processed by the application which, by querying the Topology service and the Host Location service is ONOS, computes the shortest path between the two hosts, and installs higher priority flow rules on each hop to forward packets between the two hosts (after having re-injected that packet in the network via a packet-out).
Congratulations, you completed the first exercise of the ONOS+P4 tutorial!
To kill ONOS, press ctrl-c in the ONOS log terminal window. To kill Mininet, press ctrl-d in the Mininet CLI or type exit.

Bonus exercise

As a bonus exercise, you can re-run Mininet with a larger topology to see how Exercise 1 works with a more complex topology.

Rerun the steps in Exercise 1, replacing step 3.i. with the following:
```
$ sudo -E mn --custom $BMV2_MN_PY --switch onosbmv2,pipeconf=p4-tutorial-pipeconf --topo tree,3 --controller remote,ip=127.0.0.1
```
Important: due to the limited resources of the VM, when executing many switches in Mininet, it might happen that some flow rules are not installed correctly on the switch (showing state PENDING_ADD when using ONOS command flows). In this case, ONOS provides an automatic reconciliation mechanism that tries to re-install the failed entries. To force ONOS to perform this process more often, make sure to apply step 2.v before starting Mininet.
After you activated the Reactive Forwarding application as in step 4.ii., you can ping all hosts in the network using the following Mininet command:
```
mininet> pingall
```
If everything went well, ping should work for every host pair in the network.
You can visualize the topology using the ONOS web UI.
Open a browser from within the tutorial VM (e.g. Firefox) to http://127.0.0.1:8181/onos/ui/. When asked, use the username onos and password rocks. You should see a nice tree topology.
While here, feel free to interact and discover the ONOS UI.