module ietf-network-topology {
 // yang-version 1.1;
  yang-version 1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-network-topology";
  prefix lnk;
  import ietf-inet-types {
    prefix inet;
  }
  import ietf-network {
    prefix nd;
  }
  organization
    "IETF I2RS (Interface to the Routing System) Working Group";
  contact
    "WG Web:    <http:  tools.ietf.org/wg/i2rs/>
     WG List:   <mailto:i2rs@ietf.org>
     WG Chair:  Susan Hares
                <mailto:shares@ndzh.com>
     WG Chair:  Jeffrey Haas
                <mailto:jhaas@pfrc.org>
     Editor:    Alexander Clemm
                <mailto:alex@cisco.com>
     Editor:    Jan Medved
                <mailto:jmedved@cisco.com>
     Editor:    Robert Varga
                <mailto:rovarga@cisco.com>
     Editor:    Tony Tkacik
                <mailto:ttkacik@cisco.com>
     Editor:    Nitin Bahadur
                <mailto:nitin_bahadur@yahoo.com>
     Editor:    Hariharan Ananthakrishnan
                <mailto:hari@packetdesign.com>";
  description
    "This module defines a common base model for network topology,
     augmenting the base network model with links to connect nodes,
     as well as termination points to terminate links on nodes.
     Copyright (c) 2015 IETF Trust and the persons identified as
     authors of the code.  All rights reserved.
     Redistribution and use in source and binary forms, with or
     without modification, is permitted pursuant to, and subject
     to the license terms contained in, the Simplified BSD License
     set forth in Section 4.c of the IETF Trust's Legal Provisions
     Relating to IETF Documents
     (http:  trustee.ietf.org/license-info).
     This version of this YANG module is part of
     draft-ietf-i2rs-yang-network-topo-02;
     see the RFC itself for full legal notices.
     NOTE TO RFC EDITOR: Please replace above reference to
     draft-ietf-i2rs-yang-network-topo-02 with RFC
     number when published (i.e. RFC xxxx).";
  revision 2015-12-08 {
    description
      "Initial revision.
       NOTE TO RFC EDITOR: Please replace the following reference
       to draft-ietf-i2rs-yang-network-topo-02 with
       RFC number when published (i.e. RFC xxxx).";
    reference
      "draft-ietf-i2rs-yang-network-topo-02.";
  }
  typedef link-id {
    type inet:uri;
    description
      "An identifier for a link in a topology.
       The identifier SHOULD be chosen such that the same link in a
       real network topology will always be identified through the
       same identifier, even if the model is instantiated in
           separate datastores. An implementation MAY choose to capture
       semantics in the identifier, for example to indicate the type
       of link and/or the type of topology that the link is a part
       of.";
  }
  typedef tp-id {
    type inet:uri;
    description
      "An identifier for termination points on a node.
       The identifier SHOULD be chosen such that the same TP in a
       real network topology will always be identified through the
       same identifier, even if the model is instantiated in
       separate datastores. An implementation MAY choose to capture
       semantics in the identifier, for example to indicate the type
       of TP and/or the type of node and topology that the TP is a
       part of.";
  }
  grouping link-ref {
    description
      "References a link in a specific network.";
    leaf link-ref {
      type leafref {
        path "/nd:networks/nd:network[nd:network-id=current()/../"+
          "network-ref]/lnk:link/lnk:link-id";
          require-instance false;
      }
      description
        "A type for an absolute reference a link instance.
         (This type should not be used for relative references.
         In such a case, a relative path should be used instead.)";
    }
    uses nd:network-ref;
  }
  grouping tp-ref {
    description
      "References a termination point in a specific node.";
    leaf tp-ref {
      type leafref {
        path "/nd:networks/nd:network[nd:network-id=current()/../"+
          "network-ref]/nd:node[nd:node-id=current()/../"+
          "node-ref]/lnk:termination-point/lnk:tp-id";
          require-instance false;
      }
      description
        "A type for an absolute reference to a termination point.
         (This type should not be used for relative references.
         In such a case, a relative path should be used instead.)";
    }
    uses nd:node-ref;
  }
  augment "/nd:networks/nd:network" {
    description
      "Add links to the network model.";
    list link {
      key "link-id";
      description
        "A Network Link connects a by Local (Source) node and
         a Remote (Destination) Network Nodes via a set of the
         nodes' termination points.
         As it is possible to have several links between the same
         source and destination nodes, and as a link could
         potentially be re-homed between termination points, to
         ensure that we would always know to distinguish between
         links, every link is identified by a dedicated link
         identifier.
         Note that a link models a point-to-point link, not a
         multipoint link.
         Layering dependencies on links in underlay topologies are
         not represented as the layering information of nodes and of
         termination points is sufficient.";
      container source {
        description
          "This container holds the logical source of a particular
           link.";
        leaf source-node {
          type leafref {
            path "../../../nd:node/nd:node-id";
          }
          mandatory true;
          description
            "Source node identifier, must be in same topology.";
        }
        leaf source-tp {
          type leafref {
            path "../../../nd:node[nd:node-id=current()/../"+
              "source-node]/termination-point/tp-id";
          }
          description
            "Termination point within source node that terminates
             the link.";
        }
      }
      container destination {
        description
          "This container holds the logical destination of a
           particular link.";
        leaf dest-node {
          type leafref {
            path "../../../nd:node/nd:node-id";
          }
          mandatory true;
          description
            "Destination node identifier, must be in the same
             network.";
        }
        leaf dest-tp {
          type leafref {
            path "../../../nd:node[nd:node-id=current()/../"+
              "dest-node]/termination-point/tp-id";
          }
          description
            "Termination point within destination node that
             terminates the link.";
        }
      }
      leaf link-id {
        type link-id;
        description
          "The identifier of a link in the topology.
           A link is specific to a topology to which it belongs.";
      }
      list supporting-link {
        key "network-ref link-ref";
        description
          "Identifies the link, or links, that this link
           is dependent on.";
        leaf network-ref {
          type leafref {
            path "../../../nd:supporting-network/nd:network-ref";
            require-instance false;
          }
          description
            "This leaf identifies in which underlay topology
             supporting link is present.";
        }
        leaf link-ref {
          type leafref {
            path "/nd:networks/nd:network[nd:network-id=current()/"+
              "../network-ref]/link/link-id";
              require-instance false;
          }
          description
            "This leaf identifies a link which is a part
             of this link's underlay. Reference loops, in which
             a link identifies itself as its underlay, either
             directly or transitively, are not allowed.";
        }
      }
    }
  }
  augment "/nd:networks/nd:network/nd:node" {
    description
      "Augment termination points which terminate links.
       Termination points can ultimately be mapped to interfaces.";
    list termination-point {
      key "tp-id";
      description
        "A termination point can terminate a link.
         Depending on the type of topology, a termination point
         could, for example, refer to a port or an interface.";
      leaf tp-id {
        type tp-id;
        description
          "Termination point identifier.";
      }
      list supporting-termination-point {
        key "network-ref node-ref tp-ref";
        description
          "The leaf list identifies any termination points that
           the termination point is dependent on, or maps onto.
           Those termination points will themselves be contained
           in a supporting node.
           This dependency information can be inferred from
           the dependencies between links.  For this reason,
           this item is not separately configurable.  Hence no
           corresponding constraint needs to be articulated.
           The corresponding information is simply provided by the
           implementing system.";
        leaf network-ref {
          type leafref {
            path "../../../nd:supporting-node/nd:network-ref";
            require-instance false;
          }
          description
            "This leaf identifies in which topology the
             supporting termination point is present.";
        }
        leaf node-ref {
          type leafref {
            path "../../../nd:supporting-node/nd:node-ref";
            require-instance false;
          }
          description
            "This leaf identifies in which node the supporting
             termination point is present.";
        }
        leaf tp-ref {
          type leafref {
            path "/nd:networks/nd:network[nd:network-id=current()/"+
              "../network-ref]/nd:node[nd:node-id=current()/../"+
              "node-ref]/termination-point/tp-id";
              require-instance false;
          }
          description
            "Reference to the underlay node, must be in a
             different topology";
        }
      }
    }
  }
}