Adding OpenConfig YANG models.
Change-Id: I0a2fdd5826e80933cf4b9ae939ff3051acec02aa
diff --git a/models/openconfig/src/main/yang/acl/openconfig-packet-match-types.yang b/models/openconfig/src/main/yang/acl/openconfig-packet-match-types.yang
new file mode 100644
index 0000000..7c99b80
--- /dev/null
+++ b/models/openconfig/src/main/yang/acl/openconfig-packet-match-types.yang
@@ -0,0 +1,293 @@
+module openconfig-packet-match-types {
+
+ yang-version "1";
+
+ // namespace
+ namespace "http://openconfig.net/yang/packet-match-types";
+
+ prefix "oc-pkt-match-types";
+
+ // import some basic types
+ import openconfig-inet-types { prefix oc-inet; }
+ import openconfig-extensions { prefix oc-ext; }
+
+
+ // meta
+ organization "OpenConfig working group";
+
+ contact
+ "OpenConfig working group
+ www.openconfig.net";
+
+ description
+ "This module defines common types for use in models requiring
+ data definitions related to packet matches.";
+
+ oc-ext:openconfig-version "1.0.0";
+
+ revision "2017-05-26" {
+ description
+ "Separated IP matches into AFs";
+ reference "1.0.0";
+ }
+
+ revision "2016-08-08" {
+ description
+ "OpenConfig public release";
+ reference "0.2.0";
+ }
+
+ revision "2016-04-27" {
+ description
+ "Initial revision";
+ reference "TBD";
+ }
+
+ // extension statements
+
+ // feature statements
+
+ // identity statements
+
+
+ //TODO: should replace this with an official IEEE module
+ // when available. Only a select number of types are
+ // defined in this identity.
+ identity ETHERTYPE {
+ description
+ "Base identity for commonly used Ethertype values used
+ in packet header matches on Ethernet frames. The Ethertype
+ indicates which protocol is encapsulated in the Ethernet
+ payload.";
+ reference
+ "IEEE 802.3";
+ }
+
+ identity ETHERTYPE_IPV4 {
+ base ETHERTYPE;
+ description
+ "IPv4 protocol (0x0800)";
+ }
+
+ identity ETHERTYPE_ARP {
+ base ETHERTYPE;
+ description
+ "Address resolution protocol (0x0806)";
+ }
+
+ identity ETHERTYPE_VLAN {
+ base ETHERTYPE;
+ description
+ "VLAN-tagged frame (as defined by IEEE 802.1q) (0x8100). Note
+ that this value is also used to represent Shortest Path
+ Bridging (IEEE 801.1aq) frames.";
+ }
+
+ identity ETHERTYPE_IPV6 {
+ base ETHERTYPE;
+ description
+ "IPv6 protocol (0x86DD)";
+ }
+
+ identity ETHERTYPE_MPLS {
+ base ETHERTYPE;
+ description
+ "MPLS unicast (0x8847)";
+ }
+
+ identity ETHERTYPE_LLDP {
+ base ETHERTYPE;
+ description
+ "Link Layer Discovery Protocol (0x88CC)";
+ }
+
+ identity ETHERTYPE_ROCE {
+ base ETHERTYPE;
+ description
+ "RDMA over Converged Ethernet (0x8915)";
+ }
+
+
+ //TODO: should replace this with an official IANA module when
+ //available. Only a select set of protocols are defined with
+ //this identity.
+ identity IP_PROTOCOL {
+ description
+ "Base identity for commonly used IP protocols used in
+ packet header matches";
+ reference
+ "IANA Assigned Internet Protocol Numbers";
+ }
+
+ identity IP_TCP {
+ base IP_PROTOCOL;
+ description
+ "Transmission Control Protocol (6)";
+ }
+
+ identity IP_UDP {
+ base IP_PROTOCOL;
+ description
+ "User Datagram Protocol (17)";
+ }
+
+ identity IP_ICMP {
+ base IP_PROTOCOL;
+ description
+ "Internet Control Message Protocol (1)";
+ }
+
+ identity IP_IGMP {
+ base IP_PROTOCOL;
+ description
+ "Internet Group Membership Protocol (2)";
+ }
+
+ identity IP_PIM {
+ base IP_PROTOCOL;
+ description
+ "Protocol Independent Multicast (103)";
+ }
+
+ identity IP_RSVP {
+ base IP_PROTOCOL;
+ description
+ "Resource Reservation Protocol (46)";
+ }
+
+ identity IP_GRE {
+ base IP_PROTOCOL;
+ description
+ "Generic Routing Encapsulation (47)";
+ }
+
+ identity IP_AUTH {
+ base IP_PROTOCOL;
+ description
+ "Authentication header, e.g., for IPSEC (51)";
+ }
+
+ identity IP_L2TP {
+ base IP_PROTOCOL;
+ description
+ "Layer Two Tunneling Protocol v.3 (115)";
+ }
+
+
+
+ identity TCP_FLAGS {
+ description
+ "Common TCP flags used in packet header matches";
+ reference
+ "IETF RFC 793 - Transmission Control Protocol
+ IETF RFC 3168 - The Addition of Explicit Congestion
+ Notification (ECN) to IP";
+ }
+
+ identity TCP_SYN {
+ base TCP_FLAGS;
+ description
+ "TCP SYN flag";
+ }
+
+ identity TCP_FIN {
+ base TCP_FLAGS;
+ description
+ "TCP FIN flag";
+ }
+
+ identity TCP_RST {
+ base TCP_FLAGS;
+ description
+ "TCP RST flag";
+ }
+
+ identity TCP_PSH {
+ base TCP_FLAGS;
+ description
+ "TCP push flag";
+ }
+
+ identity TCP_ACK {
+ base TCP_FLAGS;
+ description
+ "TCP ACK flag";
+ }
+
+ identity TCP_URG {
+ base TCP_FLAGS;
+ description
+ "TCP urgent flag";
+ }
+
+ identity TCP_ECE {
+ base TCP_FLAGS;
+ description
+ "TCP ECN-Echo flag. If the SYN flag is set, indicates that
+ the TCP peer is ECN-capable, otherwise indicates that a
+ packet with Congestion Experienced flag in the IP header
+ is set";
+ }
+
+ identity TCP_CWR {
+ base TCP_FLAGS;
+ description
+ "TCP Congestion Window Reduced flag";
+ }
+
+ // typedef statements
+
+ typedef port-num-range {
+ type union {
+ type string {
+ pattern '^(6[0-5][0-5][0-3][0-5]|[0-5]?[0-9]?[0-9]?[0-9]?' +
+ '[0-9]?)\.\.(6[0-5][0-5][0-3][0-5]|[0-5]?[0-9]?[0-9]?' +
+ '[0-9]?[0-9]?)$';
+ }
+ type oc-inet:port-number;
+ type enumeration {
+ enum ANY {
+ description
+ "Indicates any valid port number (e.g., wildcard)";
+ }
+ }
+ }
+ description
+ "Port numbers may be represented as a single value,
+ an inclusive range as <lower>..<higher>, or as ANY to
+ indicate a wildcard.";
+ }
+
+ typedef ip-protocol-type {
+ type union {
+ type uint8 {
+ range 0..254;
+ }
+ type identityref {
+ base IP_PROTOCOL;
+ }
+ }
+ description
+ "The IP protocol number may be expressed as a valid protocol
+ number (integer) or using a protocol type defined by the
+ IP_PROTOCOL identity";
+ }
+
+ typedef ethertype-type {
+ type union {
+ type uint16 {
+ //Note range can only be expressed in decimal
+ //but value is expected in hex notation.
+ range 1..65535;
+ }
+ type identityref {
+ base ETHERTYPE;
+ }
+ }
+ description
+ "The Ethertype value may be expressed as a 16-bit number in
+ hexadecimal notation, or using a type defined by the
+ ETHERTYPE identity";
+ }
+
+}
\ No newline at end of file