diff --git a/tools/package/wrapper/bin/onos-service b/tools/package/wrapper/bin/onos-service
new file mode 100755
index 0000000..27da7a3
--- /dev/null
+++ b/tools/package/wrapper/bin/onos-service
@@ -0,0 +1,557 @@
+#! /bin/sh
+
+# ------------------------------------------------------------------------
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ------------------------------------------------------------------------
+
+# If require, set the JAVA_HOME to launch the wrapper
+#
+#JAVA_HOME=
+#
+
+# Application
+APP_NAME="onos"
+APP_LONG_NAME="onos"
+
+# Wrapper
+WRAPPER_CMD="/opt/onos/apache-karaf-3.0.1/bin/${APP_NAME}-wrapper"
+WRAPPER_CONF="/opt/onos/apache-karaf-3.0.1/etc/${APP_NAME}-wrapper.conf"
+
+# Priority at which to run the wrapper.  See "man nice" for valid priorities.
+#  nice is only used if a priority is specified.
+PRIORITY=
+
+# Location of the data folder.
+DATADIR="/opt/onos/apache-karaf-3.0.1/data"
+
+# Location of the pid file.
+PIDDIR="/opt/onos/apache-karaf-3.0.1/data"
+
+# If uncommented, causes the Wrapper to be shutdown using an anchor file.
+#  When launched with the 'start' command, it will also ignore all INT and
+#  TERM signals.
+#IGNORE_SIGNALS=true
+
+# If specified, the Wrapper will be run as the specified user.
+# IMPORTANT - Make sure that the user has the required privileges to write
+#  the PID file and wrapper.log files.  Failure to be able to write the log
+#  file will cause the Wrapper to exit without any way to write out an error
+#  message.
+# NOTE - This will set the user which is used to run the Wrapper as well as
+#  the JVM and is not useful in situations where a privileged resource or
+#  port needs to be allocated prior to the user being changed.
+#RUN_AS_USER=
+
+# The following two lines are used by the chkconfig command. Change as is
+#  appropriate for your application.  They should remain commented.
+# chkconfig: 2345 20 80
+# description: onos
+
+# Do not modify anything beyond this point
+#-----------------------------------------------------------------------------
+
+# Get the fully qualified path to the script
+case $0 in
+    /*)
+        SCRIPT="$0"
+        ;;
+    *)
+        PWD=`pwd`
+        SCRIPT="$PWD/$0"
+        ;;
+esac
+
+# Resolve the true real path without any sym links.
+CHANGED=true
+while [ "X$CHANGED" != "X" ]
+do
+    # Change spaces to ":" so the tokens can be parsed.
+    SCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
+    # Get the real path to this script, resolving any symbolic links
+    TOKENS=`echo $SCRIPT | sed -e 's;/; ;g'`
+    REALPATH=
+    for C in $TOKENS; do
+        REALPATH="$REALPATH/$C"
+        while [ -h "$REALPATH" ] ; do
+            LS="`ls -ld "$REALPATH"`"
+            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
+            if expr "$LINK" : '/.*' > /dev/null; then
+                REALPATH="$LINK"
+            else
+                REALPATH="`dirname "$REALPATH"`""/$LINK"
+            fi
+        done
+    done
+    # Change ":" chars back to spaces.
+    REALPATH=`echo $REALPATH | sed -e 's;:; ;g'`
+
+    if [ "$REALPATH" = "$SCRIPT" ]
+    then
+        CHANGED=""
+    else
+        SCRIPT="$REALPATH"
+    fi
+done
+
+# Change the current directory to the location of the script
+cd "`dirname "$REALPATH"`"
+REALDIR=`pwd`
+
+# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
+#  the working directory is later changed.
+FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    PIDDIR=$REALDIR/$PIDDIR
+fi
+# Same test for WRAPPER_CMD
+FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
+fi
+# Same test for WRAPPER_CONF
+FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
+if [ "$FIRST_CHAR" != "/" ]
+then
+    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
+fi
+
+# Process ID
+ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
+PIDFILE="$PIDDIR/$APP_NAME.pid"
+LOCKDIR="/var/lock/subsys"
+LOCKFILE="$LOCKDIR/$APP_NAME"
+pid=""
+
+# Resolve the location of the 'ps' command
+PSEXE="/usr/bin/ps"
+if [ ! -x $PSEXE ]
+then
+    PSEXE="/bin/ps"
+    if [ ! -x $PSEXE ]
+    then
+        echo "Unable to locate 'ps'."
+        echo "Please report this message along with the location of the command on your system."
+        exit 1
+    fi
+fi
+
+# Resolve the os
+DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
+case "$DIST_OS" in
+    'sunos')
+        DIST_OS="solaris"
+        ;;
+    'hp-ux' | 'hp-ux64')
+        DIST_OS="hpux"
+        ;;
+    'darwin')
+        DIST_OS="macosx"
+        ;;
+    'unix_sv')
+        DIST_OS="unixware"
+        ;;
+esac
+
+# Resolve the architecture
+DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]`
+if [ "$DIST_ARCH" = "unknown" ]
+then
+    DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
+fi
+case "$DIST_ARCH" in
+    'amd64' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
+        DIST_ARCH="x86"
+        ;;
+    'ip27')
+        DIST_ARCH="mips"
+        ;;
+    'power' | 'powerpc' | 'power_pc' | 'ppc64')
+        DIST_ARCH="ppc"
+        ;;
+    'pa_risc' | 'pa-risc')
+        DIST_ARCH="parisc"
+        ;;
+    'sun4u' | 'sparcv9')
+        DIST_ARCH="sparc"
+        ;;
+    '9000/800')
+        DIST_ARCH="parisc"
+        ;;
+esac
+
+# Decide on the wrapper binary to use.
+# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit
+#  platforms, if the 64-bit binary exists then the distribution most
+#  likely wants to use long names.  Otherwise, look for the default.
+# For macosx, we also want to look for universal binaries.
+WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+if [ -x $WRAPPER_TEST_CMD ]
+then
+    WRAPPER_CMD="$WRAPPER_TEST_CMD"
+else
+    if [ "$DIST_OS" = "macosx" ]
+    then
+        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32"
+        if [ -x $WRAPPER_TEST_CMD ]
+        then
+            WRAPPER_CMD="$WRAPPER_TEST_CMD"
+        else
+            WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+            if [ -x $WRAPPER_TEST_CMD ]
+            then
+                WRAPPER_CMD="$WRAPPER_TEST_CMD"
+            else
+                WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64"
+                if [ -x $WRAPPER_TEST_CMD ]
+                then
+                    WRAPPER_CMD="$WRAPPER_TEST_CMD"
+                else
+                    if [ ! -x $WRAPPER_CMD ]
+                    then
+                        echo "Unable to locate any of the following binaries:"
+                        echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+                        echo "  $WRAPPER_CMD-$DIST_OS-universal-32"
+                        echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+                        echo "  $WRAPPER_CMD-$DIST_OS-universal-64"
+                        echo "  $WRAPPER_CMD"
+                        exit 1
+                    fi
+                fi
+            fi
+        fi
+    else
+        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+        if [ -x $WRAPPER_TEST_CMD ]
+        then
+            WRAPPER_CMD="$WRAPPER_TEST_CMD"
+        else
+            if [ ! -x $WRAPPER_CMD ]
+            then
+                echo "Unable to locate any of the following binaries:"
+                echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
+                echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
+                echo "  $WRAPPER_CMD"
+                exit 1
+            fi
+        fi
+    fi
+fi
+
+# Build the nice clause
+if [ "X$PRIORITY" = "X" ]
+then
+    CMDNICE=""
+else
+    CMDNICE="nice -$PRIORITY"
+fi
+
+# Build the anchor file clause.
+if [ "X$IGNORE_SIGNALS" = "X" ]
+then
+   ANCHORPROP=
+   IGNOREPROP=
+else
+   ANCHORPROP=wrapper.anchorfile=$ANCHORFILE
+   IGNOREPROP=wrapper.ignore_signals=TRUE
+fi
+
+# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
+if [ -d $LOCKDIR ]
+then
+    LOCKPROP=wrapper.lockfile=$LOCKFILE
+else
+    LOCKPROP=
+fi
+
+checkUser() {
+    # Check the configured user.  If necessary rerun this script as the desired user.
+    if [ "X$RUN_AS_USER" != "X" ]
+    then
+        # Resolve the location of the 'id' command
+        IDEXE="/usr/xpg4/bin/id"
+        if [ ! -x $IDEXE ]
+        then
+            IDEXE="/usr/bin/id"
+            if [ ! -x $IDEXE ]
+            then
+                echo "Unable to locate 'id'."
+                echo "Please report this message along with the location of the command on your system."
+                exit 1
+            fi
+        fi
+
+        if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
+        then
+            # Already running as the configured user.  Avoid password prompts by not calling su.
+            RUN_AS_USER=""
+        fi
+    fi
+    if [ "X$RUN_AS_USER" != "X" ]
+    then
+        # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
+        # able to create the lock file.  The Wrapper will be able to update this file once it
+        # is created but will not be able to delete it on shutdown.  If $2 is defined then
+        # the lock file should be created for the current command
+        if [ "X$LOCKPROP" != "X" ]
+        then
+            if [ "X$2" != "X" ]
+            then
+                # Resolve the primary group
+                RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
+                if [ "X$RUN_AS_GROUP" = "X" ]
+                then
+                    RUN_AS_GROUP=$RUN_AS_USER
+                fi
+                touch $LOCKFILE
+                chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
+            fi
+        fi
+
+        # Still want to change users, recurse.  This means that the user will only be
+        #  prompted for a password once.
+        su -m $RUN_AS_USER -s /bin/sh -c "$REALPATH $1"
+        RETVAL=$?
+
+        # Now that we are the original user again, we may need to clean up the lock file.
+        if [ "X$LOCKPROP" != "X" ]
+        then
+            getpid
+            if [ "X$pid" = "X" ]
+            then
+                # Wrapper is not running so make sure the lock file is deleted.
+                if [ -f $LOCKFILE ]
+                then
+                    rm $LOCKFILE
+                fi
+            fi
+        fi
+
+        exit $RETVAL
+    fi
+}
+
+getpid() {
+    if [ -f $PIDFILE ]
+    then
+        if [ -r $PIDFILE ]
+        then
+            pid=`cat $PIDFILE`
+            if [ "X$pid" != "X" ]
+            then
+                # It is possible that 'a' process with the pid exists but that it is not the
+                #  correct process.  This can happen in a number of cases, but the most
+                #  common is during system startup after an unclean shutdown.
+                # The ps statement below looks for the specific wrapper command running as
+                #  the pid.  If it is not found then the pid file is considered to be stale.
+                if [ "$DIST_OS" = "solaris" ]
+                then
+                    pidtest=`$PSEXE -p $pid -o comm | grep $WRAPPER_CMD | tail -1`
+                else
+                    pidtest=`$PSEXE -p $pid -o command | grep $WRAPPER_CMD | tail -1`
+                fi
+                if [ "X$pidtest" = "X" ]
+                then
+                    # This is a stale pid file.
+                    rm -f $PIDFILE
+                    echo "Removed stale pid file: $PIDFILE"
+                    pid=""
+                fi
+            fi
+        else
+            echo "Cannot read $PIDFILE."
+            exit 1
+        fi
+    fi
+}
+
+testpid() {
+    pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
+    if [ "X$pid" = "X" ]
+    then
+        # Process is gone so remove the pid file.
+        rm -f $PIDFILE
+        pid=""
+    fi
+}
+
+console() {
+    echo "Running $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE $ANCHORPROP $LOCKPROP"
+        exec $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+}
+
+start() {
+    echo "Starting $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        if [ ! -d $DATADIR ]; then
+            mkdir $DATADIR
+        fi
+        if [ ! -d $DATADIR/log ]; then
+            mkdir $DATADIR/log
+        fi
+        COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
+        exec $COMMAND_LINE
+    else
+        echo "$APP_LONG_NAME is already running."
+        exit 1
+    fi
+}
+
+stopit() {
+    echo "Stopping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+    else
+        if [ "X$IGNORE_SIGNALS" = "X" ]
+        then
+            # Running so try to stop it.
+            kill $pid
+            if [ $? -ne 0 ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        else
+            rm -f $ANCHORFILE
+            if [ -f $ANCHORFILE ]
+            then
+                # An explanation for the failure should have been given
+                echo "Unable to stop $APP_LONG_NAME."
+                exit 1
+            fi
+        fi
+
+        # We can not predict how long it will take for the wrapper to
+        #  actually stop as it depends on settings in wrapper.conf.
+        #  Loop until it does.
+        savepid=$pid
+        CNT=0
+        TOTCNT=0
+        while [ "X$pid" != "X" ]
+        do
+            # Show a waiting message every 5 seconds.
+            if [ "$CNT" -lt "5" ]
+            then
+                CNT=`expr $CNT + 1`
+            else
+                echo "Waiting for $APP_LONG_NAME to exit..."
+                CNT=0
+            fi
+            TOTCNT=`expr $TOTCNT + 1`
+
+            sleep 1
+
+            testpid
+        done
+
+        pid=$savepid
+        testpid
+        if [ "X$pid" != "X" ]
+        then
+            echo "Failed to stop $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Stopped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+status() {
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME is not running."
+        exit 1
+    else
+        echo "$APP_LONG_NAME is running ($pid)."
+        exit 0
+    fi
+}
+
+dump() {
+    echo "Dumping $APP_LONG_NAME..."
+    getpid
+    if [ "X$pid" = "X" ]
+    then
+        echo "$APP_LONG_NAME was not running."
+
+    else
+        kill -3 $pid
+
+        if [ $? -ne 0 ]
+        then
+            echo "Failed to dump $APP_LONG_NAME."
+            exit 1
+        else
+            echo "Dumped $APP_LONG_NAME."
+        fi
+    fi
+}
+
+case "$1" in
+
+    'console')
+        checkUser $1 touchlock
+        console
+        ;;
+
+    'start')
+        checkUser $1 touchlock
+        start
+        ;;
+
+    'stop')
+        checkUser $1
+        stopit
+        ;;
+
+    'restart')
+        checkUser $1 touchlock
+        stopit
+        start
+        ;;
+
+    'status')
+        checkUser $1
+        status
+        ;;
+
+    'dump')
+        checkUser $1
+        dump
+        ;;
+
+    *)
+        echo "Usage: $0 { console | start | stop | restart | status | dump }"
+        exit 1
+        ;;
+esac
+
+exit 0