/*
 * Copyright 2016-present Open Networking Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.onosproject.driver.pipeline.ofdpa;

import com.google.common.collect.ImmutableList;
import org.onlab.packet.MacAddress;
import org.onlab.packet.VlanId;
import org.onosproject.core.ApplicationId;
import org.onosproject.driver.extensions.Ofdpa3MatchMplsL2Port;
import org.onosproject.driver.extensions.Ofdpa3MatchOvid;
import org.onosproject.driver.extensions.Ofdpa3PopCw;
import org.onosproject.driver.extensions.Ofdpa3PopL2Header;
import org.onosproject.driver.extensions.Ofdpa3SetMplsL2Port;
import org.onosproject.driver.extensions.Ofdpa3SetMplsType;
import org.onosproject.driver.extensions.Ofdpa3SetOvid;
import org.onosproject.driver.extensions.Ofdpa3SetQosIndex;
import org.onosproject.driver.extensions.OfdpaMatchVlanVid;
import org.onosproject.net.PortNumber;
import org.onosproject.net.behaviour.NextGroup;
import org.onosproject.net.behaviour.PipelinerContext;
import org.onosproject.net.flow.DefaultFlowRule;
import org.onosproject.net.flow.DefaultTrafficSelector;
import org.onosproject.net.flow.DefaultTrafficTreatment;
import org.onosproject.net.flow.FlowRule;
import org.onosproject.net.flow.FlowRuleOperations;
import org.onosproject.net.flow.FlowRuleOperationsContext;
import org.onosproject.net.flow.IndexTableId;
import org.onosproject.net.flow.TrafficSelector;
import org.onosproject.net.flow.TrafficTreatment;
import org.onosproject.net.flow.criteria.Criteria;
import org.onosproject.net.flow.criteria.Criterion;
import org.onosproject.net.flow.criteria.EthCriterion;
import org.onosproject.net.flow.criteria.PortCriterion;
import org.onosproject.net.flow.criteria.TunnelIdCriterion;
import org.onosproject.net.flow.criteria.VlanIdCriterion;
import org.onosproject.net.flow.instructions.Instruction;
import org.onosproject.net.flow.instructions.Instructions;
import org.onosproject.net.flow.instructions.Instructions.OutputInstruction;
import org.onosproject.net.flow.instructions.L2ModificationInstruction;
import org.onosproject.net.flow.instructions.L2ModificationInstruction.L2SubType;
import org.onosproject.net.flow.instructions.L3ModificationInstruction;
import org.onosproject.net.flowobjective.FilteringObjective;
import org.onosproject.net.flowobjective.ForwardingObjective;
import org.onosproject.net.flowobjective.ObjectiveError;
import org.onosproject.net.group.Group;
import org.onosproject.net.group.GroupKey;
import org.slf4j.Logger;

import java.util.Collection;
import java.util.Collections;
import java.util.Deque;
import java.util.List;

import static org.onlab.packet.MacAddress.NONE;
import static org.onosproject.driver.pipeline.ofdpa.OfdpaPipelineUtility.*;
import static org.onosproject.driver.extensions.Ofdpa3MplsType.VPWS;
import static org.onosproject.net.flow.criteria.Criterion.Type.INNER_VLAN_VID;
import static org.onosproject.net.flow.criteria.Criterion.Type.IN_PORT;
import static org.onosproject.net.flow.criteria.Criterion.Type.TUNNEL_ID;
import static org.onosproject.net.flow.criteria.Criterion.Type.VLAN_VID;
import static org.onosproject.net.flow.instructions.Instruction.Type.L2MODIFICATION;
import static org.onosproject.net.flow.instructions.L2ModificationInstruction.ModTunnelIdInstruction;
import static org.slf4j.LoggerFactory.getLogger;

/**
 * Pipeliner for Broadcom OF-DPA 3.0 TTP.
 */
public class Ofdpa3Pipeline extends Ofdpa2Pipeline {

    private final Logger log = getLogger(getClass());

    @Override
    protected void initDriverId() {
        driverId = coreService.registerApplication(
                "org.onosproject.driver.Ofdpa3Pipeline");
    }

    @Override
    protected void initGroupHander(PipelinerContext context) {
        groupHandler = new Ofdpa3GroupHandler();
        groupHandler.init(deviceId, context);
    }

    @Override
    protected boolean requireVlanExtensions() {
        return false;
    }

    @Override
    protected boolean shouldRetry() {
        return false;
    }

    @Override
    protected boolean supportsUnicastBlackHole() {
        return true;
    }

    @Override
    protected void processFilter(FilteringObjective filteringObjective,
                                 boolean install,
                                 ApplicationId applicationId) {

        // Check if filter is intended for pseudowire
        boolean isPw = isPseudowire(filteringObjective);

        if (isPw) {
            FlowRuleOperations.Builder ops = FlowRuleOperations.builder();
            PortCriterion portCriterion;

            VlanIdCriterion innerVlanIdCriterion = null;
            for (Criterion criterion : filteringObjective.conditions()) {
                if (criterion.type() == INNER_VLAN_VID) {
                    innerVlanIdCriterion = (VlanIdCriterion) criterion;
                    break;
                }
            }

            VlanIdCriterion outerVlanIdCriterion = null;
            // We extract the expected port criterion in the key.
            portCriterion = (PortCriterion) filteringObjective.key();
            // We extract the outer vlan id criterion.
            for (Criterion criterion : filteringObjective.conditions()) {
                if (criterion.type() == VLAN_VID) {
                    outerVlanIdCriterion = (VlanIdCriterion) criterion;
                    break;
                }
            }

            // We extract the tunnel id.
            long tunnelId;
            VlanId egressVlan;

            if (filteringObjective.meta() != null &&
                    filteringObjective.meta().allInstructions().size() != 2) {
                log.warn("Bad filtering objective from app: {}. Not"
                                 + "processing filtering objective", applicationId);
                fail(filteringObjective, ObjectiveError.BADPARAMS);
                return;
            } else if (filteringObjective.meta() != null &&
                    filteringObjective.meta().allInstructions().size() == 2 &&
                    filteringObjective.meta().allInstructions().get(0).type() == L2MODIFICATION &&
                    filteringObjective.meta().allInstructions().get(1).type() == L2MODIFICATION) {

                L2ModificationInstruction l2instruction = (L2ModificationInstruction)
                        filteringObjective.meta().allInstructions().get(0);

                if (l2instruction.subtype() != L2SubType.TUNNEL_ID) {
                    log.warn("Bad filtering objective from app: {}. Not"
                                     + "processing filtering objective", applicationId);
                    fail(filteringObjective, ObjectiveError.BADPARAMS);
                    return;
                } else {
                    tunnelId = ((ModTunnelIdInstruction) l2instruction).tunnelId();
                }

                L2ModificationInstruction vlanInstruction = (L2ModificationInstruction)
                        filteringObjective.meta().allInstructions().get(1);

                if (vlanInstruction.subtype() != L2SubType.VLAN_ID) {
                    log.warn("Bad filtering objective from app: {}. Not"
                                     + "processing filtering objective", applicationId);
                    fail(filteringObjective, ObjectiveError.BADPARAMS);
                    return;
                } else {
                    egressVlan = ((L2ModificationInstruction.ModVlanIdInstruction) vlanInstruction).vlanId();
                }
            } else {
                log.warn("Bad filtering objective from app: {}. Not"
                                 + "processing filtering objective", applicationId);
                fail(filteringObjective, ObjectiveError.BADPARAMS);
                return;
            }

            // Mpls tunnel ids according to the OFDPA manual have to be
            // in the range [2^17-1, 2^16].
            tunnelId = MPLS_TUNNEL_ID_BASE | tunnelId;
            // Sanity check for the filtering objective.
            if (portCriterion == null ||
                    outerVlanIdCriterion == null ||
                    tunnelId > MPLS_TUNNEL_ID_MAX) {
                log.warn("Bad filtering objective from app: {}. Not"
                                 + "processing filtering objective", applicationId);
                fail(filteringObjective, ObjectiveError.BADPARAMS);
                return;
            }
            // 0x0000XXXX is UNI interface.
            if (portCriterion.port().toLong() > MPLS_UNI_PORT_MAX) {
                log.error("Filtering Objective invalid logical port {}",
                          portCriterion.port().toLong());
                fail(filteringObjective, ObjectiveError.BADPARAMS);
                return;
            }

            // We create the flows.
            List<FlowRule> pwRules = processPwFilter(portCriterion,
                                                     innerVlanIdCriterion,
                                                     outerVlanIdCriterion,
                                                     tunnelId,
                                                     applicationId,
                                                     egressVlan
            );
            // We tag the flow for adding or for removing.
            for (FlowRule pwRule : pwRules) {
                log.debug("adding filtering rule in VLAN tables: {} for dev: {}",
                          pwRule, deviceId);
                ops = install ? ops.add(pwRule) : ops.remove(pwRule);
            }
            // We push the filtering rules for the pw.
            flowRuleService.apply(ops.build(new FlowRuleOperationsContext() {
                @Override
                public void onSuccess(FlowRuleOperations ops) {
                    log.info("Applied {} filtering rules in device {}",
                             ops.stages().get(0).size(), deviceId);
                    pass(filteringObjective);
                }

                @Override
                public void onError(FlowRuleOperations ops) {
                    log.info("Failed to apply all filtering rules in dev {}", deviceId);
                    fail(filteringObjective, ObjectiveError.FLOWINSTALLATIONFAILED);
                }
            }));
        } else if (isDoubleTagged(filteringObjective)) {
            processDoubleTaggedFilter(filteringObjective, install, applicationId);
        } else {
            // If it is not a pseudo wire flow or double-tagged filter, we fall back
            // to the OFDPA 2.0 pipeline.
            super.processFilter(filteringObjective, install, applicationId);
        }
    }

    /**
     *
     * @param meta The metadata instruction of this treatment
     * @return True if we should remove both VLAN and Mac Termination flow entries.
     *         This is only used for double tagged hosts.
     */
    public boolean shouldRemoveDoubleTagged(Instruction meta) {

        Instructions.MetadataInstruction metadataInstruction = (Instructions.MetadataInstruction) meta;
        return ((metadataInstruction.metadata() & metadataInstruction.metadataMask()) == 1);
    }

    /**
     * Configure filtering rules of outer and inner VLAN IDs, and a MAC address.
     * Filtering happens in three tables (VLAN_TABLE, VLAN_1_TABLE, TMAC_TABLE).
     *
     * @param filteringObjective the filtering objective
     * @param install            true to add, false to remove
     * @param applicationId      for application programming this filter
     */
    private void processDoubleTaggedFilter(FilteringObjective filteringObjective,
                                           boolean install,
                                           ApplicationId applicationId) {
        PortCriterion portCriterion = null;
        EthCriterion ethCriterion = null;
        VlanIdCriterion innervidCriterion = null;
        VlanIdCriterion outerVidCriterion = null;
        boolean popVlan = false;
        boolean removeDoubleTagged = true;
        if (filteringObjective.meta().writeMetadata() != null) {
            removeDoubleTagged = shouldRemoveDoubleTagged(filteringObjective.meta().writeMetadata());
        }
        log.info("HERE , removeDoubleTagged {}", removeDoubleTagged);

        TrafficTreatment meta = filteringObjective.meta();
        if (!filteringObjective.key().equals(Criteria.dummy()) &&
                filteringObjective.key().type() == Criterion.Type.IN_PORT) {
            portCriterion = (PortCriterion) filteringObjective.key();
        }
        if (portCriterion == null) {
            log.warn("No IN_PORT defined in filtering objective from app: {}" +
                             "Failed to program VLAN tables.", applicationId);
            return;
        } else {
            log.debug("Received filtering objective for dev/port: {}/{}", deviceId,
                      portCriterion.port());
        }

        // meta should have only one instruction, popVlan.
        if (meta != null && meta.allInstructions().size() == 1) {
            L2ModificationInstruction l2Inst = (L2ModificationInstruction) meta.allInstructions().get(0);
            if (l2Inst.subtype().equals(L2SubType.VLAN_POP)) {
                popVlan = true;
            } else {
                log.warn("Filtering objective can have only VLAN_POP instruction.");
                return;
            }
        } else {
            log.warn("Filtering objective should have one instruction.");
            return;
        }

        FlowRuleOperations.Builder ops = FlowRuleOperations.builder();
        for (Criterion criterion : filteringObjective.conditions()) {
            switch (criterion.type()) {
                case ETH_DST:
                case ETH_DST_MASKED:
                    ethCriterion = (EthCriterion) criterion;
                    break;
                case VLAN_VID:
                    if (innervidCriterion == null) {
                        innervidCriterion = (VlanIdCriterion) criterion;
                    } else {
                        outerVidCriterion = innervidCriterion;
                        innervidCriterion = (VlanIdCriterion) criterion;
                    }
                    break;
                default:
                    log.warn("Unsupported filter {}", criterion);
                    fail(filteringObjective, ObjectiveError.UNSUPPORTED);
                    return;
            }
        }

        if (innervidCriterion == null || outerVidCriterion == null) {
            log.warn("filtering objective should have two vidCriterion.");
            return;
        }

        if (ethCriterion == null || ethCriterion.mac().equals(NONE)) {
            // NOTE: it is possible that a filtering objective only has vidCriterion
            log.warn("filtering objective missing dstMac, cannot program TMAC table");
            return;
        } else {
            MacAddress unicastMac = readEthDstFromTreatment(filteringObjective.meta());
            List<List<FlowRule>> allStages = processEthDstFilter(portCriterion, ethCriterion, innervidCriterion,
                                                                 innervidCriterion.vlanId(), unicastMac,
                                                                 applicationId);
            for (List<FlowRule> flowRules : allStages) {
                log.trace("Starting a new flow rule stage for TMAC table flow");
                ops.newStage();

                for (FlowRule flowRule : flowRules) {
                    log.trace("{} flow rules in TMAC table: {} for dev: {}",
                              (install) ? "adding" : "removing", flowRules, deviceId);
                    if (install) {
                        ops = ops.add(flowRule);
                    } else {
                        // NOTE: Only remove TMAC flow when there is no more enabled port within the
                        // same VLAN on this device if TMAC doesn't support matching on in_port.
                        if (matchInPortTmacTable()
                                || (filteringObjective.meta() != null
                                && filteringObjective.meta().clearedDeferred())) {

                            // if metadata instruction not null and not removeDoubleTagged move on.
                            if ((filteringObjective.meta().writeMetadata() != null) && (!removeDoubleTagged)) {
                                log.info("Skipping removal of tmac rule for device {}", deviceId);
                                continue;
                            } else {
                                ops = ops.remove(flowRule);
                            }
                        } else {
                            log.debug("Abort TMAC flow removal on {}. Some other ports still share this TMAC flow");
                        }
                    }
                }
            }
        }

        List<FlowRule> rules;
        rules = processDoubleVlanIdFilter(portCriterion, innervidCriterion,
                                          outerVidCriterion, popVlan, applicationId);
        for (FlowRule flowRule : rules) {
            log.trace("{} flow rule in VLAN table: {} for dev: {}",
                      (install) ? "adding" : "removing", flowRule, deviceId);
            // if context is remove, table is vlan_1 and removeDoubleTagged is false, continue.
            if (flowRule.table().equals(IndexTableId.of(VLAN_TABLE)) &&
                    !removeDoubleTagged && !install) {
                log.info("Skipping removal of vlan table rule for now!");
                continue;
            }
            ops = install ? ops.add(flowRule) : ops.remove(flowRule);
        }

        // apply filtering flow rules
        flowRuleService.apply(ops.build(new FlowRuleOperationsContext() {
            @Override
            public void onSuccess(FlowRuleOperations ops) {
                log.debug("Applied {} filtering rules in device {}",
                          ops.stages().get(0).size(), deviceId);
                pass(filteringObjective);
            }

            @Override
            public void onError(FlowRuleOperations ops) {
                log.info("Failed to apply all filtering rules in dev {}", deviceId);
                fail(filteringObjective, ObjectiveError.FLOWINSTALLATIONFAILED);
            }
        }));

    }
    /**
     * Internal implementation of processDoubleVlanIdFilter.
     *
     * @param portCriterion       port on device for which this filter is programmed
     * @param innerVidCriterion   inner vlan
     * @param outerVidCriterion   outer vlan
     * @param popVlan             true if outer vlan header needs to be removed
     * @param applicationId       for application programming this filter
     * @return flow rules for port-vlan filters
     */
    private List<FlowRule> processDoubleVlanIdFilter(PortCriterion portCriterion,
                                                       VlanIdCriterion innerVidCriterion,
                                                       VlanIdCriterion outerVidCriterion,
                                                       boolean popVlan,
                                                       ApplicationId applicationId) {
        TrafficSelector.Builder outerSelector = DefaultTrafficSelector.builder();
        TrafficTreatment.Builder outerTreatment = DefaultTrafficTreatment.builder();
        TrafficSelector.Builder innerSelector = DefaultTrafficSelector.builder();
        TrafficTreatment.Builder innerTreatment = DefaultTrafficTreatment.builder();

        VlanId outerVlanId = outerVidCriterion.vlanId();
        VlanId innerVlanId = innerVidCriterion.vlanId();
        PortNumber portNumber = portCriterion.port();
        // Check arguments
        if (PortNumber.ALL.equals(portNumber)
                || outerVlanId.equals(VlanId.NONE)
                || innerVlanId.equals(VlanId.NONE)) {
            log.warn("Incomplete Filtering Objective. " +
                             "VLAN Table cannot be programmed for {}", deviceId);
            return ImmutableList.of();
        } else {
            outerSelector.matchInPort(portNumber);
            innerSelector.matchInPort(portNumber);
            outerTreatment.transition(VLAN_1_TABLE);
            innerTreatment.transition(TMAC_TABLE);

            if (requireVlanExtensions()) {
                OfdpaMatchVlanVid ofdpaOuterMatchVlanVid = new OfdpaMatchVlanVid(outerVlanId);
                outerSelector.extension(ofdpaOuterMatchVlanVid, deviceId);
                OfdpaMatchVlanVid ofdpaInnerMatchVlanVid = new OfdpaMatchVlanVid(innerVlanId);
                innerSelector.extension(ofdpaInnerMatchVlanVid, deviceId);
            } else {
                outerSelector.matchVlanId(outerVlanId);
                innerSelector.matchVlanId(innerVlanId);
            }

            innerSelector.extension(new Ofdpa3MatchOvid(outerVlanId), deviceId);
            outerTreatment.extension(new Ofdpa3SetOvid(outerVlanId), deviceId);
            if (popVlan) {
                outerTreatment.popVlan();
            }
        }
        FlowRule outerRule = DefaultFlowRule.builder()
                .forDevice(deviceId)
                .withSelector(outerSelector.build())
                .withTreatment(outerTreatment.build())
                .withPriority(DEFAULT_PRIORITY)
                .fromApp(applicationId)
                .makePermanent()
                .forTable(VLAN_TABLE)
                .build();
        FlowRule innerRule = DefaultFlowRule.builder()
                .forDevice(deviceId)
                .withSelector(innerSelector.build())
                .withTreatment(innerTreatment.build())
                .withPriority(DEFAULT_PRIORITY)
                .fromApp(applicationId)
                .makePermanent()
                .forTable(VLAN_1_TABLE)
                .build();

        return ImmutableList.of(outerRule, innerRule);
    }

    /**
     * Method to process the pw related filtering objectives.
     *
     * @param portCriterion the in port match
     * @param innerVlanIdCriterion the inner vlan match
     * @param outerVlanIdCriterion the outer vlan match
     * @param tunnelId the tunnel id
     * @param applicationId the application id
     * @param egressVlan the vlan to modify, was passed in metadata
     * @return a list of flow rules to install
     */
    private List<FlowRule> processPwFilter(PortCriterion portCriterion,
                                           VlanIdCriterion innerVlanIdCriterion,
                                           VlanIdCriterion outerVlanIdCriterion,
                                           long tunnelId,
                                           ApplicationId applicationId,
                                           VlanId egressVlan) {

        FlowRule vlan1FlowRule;
        int mplsLogicalPort = ((int) portCriterion.port().toLong());
        // We have to match on the inner vlan and outer vlan at the same time.
        // Ofdpa supports this through the OVID meta-data type.

        ImmutableList<FlowRule> toReturn;

        // pseudowire configured with double tagged vlans
        if (!(innerVlanIdCriterion.vlanId().equals(VlanId.NONE))
                && !(outerVlanIdCriterion.vlanId().equals(VlanId.NONE))) {

            log.info("Installing filter objective for double tagged CE for tunnel {}", tunnelId);

            TrafficSelector.Builder vlan1Selector = DefaultTrafficSelector.builder()
                    .matchInPort(portCriterion.port())
                    .matchVlanId(innerVlanIdCriterion.vlanId())
                    .extension(new Ofdpa3MatchOvid(outerVlanIdCriterion.vlanId()), deviceId);
            // TODO understand for the future how to manage the vlan rewrite.
            TrafficTreatment.Builder vlan1Treatment = DefaultTrafficTreatment.builder()
                    .pushVlan()
                    .setVlanId(egressVlan)
                    .extension(new Ofdpa3SetMplsType(VPWS), deviceId)
                    .extension(new Ofdpa3SetMplsL2Port(mplsLogicalPort), deviceId)
                    .setTunnelId(tunnelId)
                    .transition(MPLS_L2_PORT_FLOW_TABLE);
            vlan1FlowRule = DefaultFlowRule.builder()
                    .forDevice(deviceId)
                    .withSelector(vlan1Selector.build())
                    .withTreatment(vlan1Treatment.build())
                    .withPriority(DEFAULT_PRIORITY)
                    .fromApp(applicationId)
                    .makePermanent()
                    .forTable(VLAN_1_TABLE)
                    .build();
            // Finally we create the flow rule for the vlan table.
            FlowRule vlanFlowRule;
            // We have to match on the outer vlan.
            TrafficSelector.Builder vlanSelector = DefaultTrafficSelector.builder()
                    .matchInPort(portCriterion.port())
                    .matchVlanId(outerVlanIdCriterion.vlanId());
            // TODO understand for the future how to manage the vlan rewrite.
            TrafficTreatment.Builder vlanTreatment = DefaultTrafficTreatment.builder()
                    .popVlan()
                    .extension(new Ofdpa3SetOvid(outerVlanIdCriterion.vlanId()), deviceId)
                    .transition(VLAN_1_TABLE);
            vlanFlowRule = DefaultFlowRule.builder()
                    .forDevice(deviceId)
                    .withSelector(vlanSelector.build())
                    .withTreatment(vlanTreatment.build())
                    .withPriority(DEFAULT_PRIORITY)
                    .fromApp(applicationId)
                    .makePermanent()
                    .forTable(VLAN_TABLE)
                    .build();

            return ImmutableList.of(vlan1FlowRule, vlanFlowRule);
        } else  if (!(innerVlanIdCriterion.vlanId().equals(VlanId.NONE))
                && (outerVlanIdCriterion.vlanId().equals(VlanId.NONE))) {

            log.info("Installing filter objective for single tagged CE for tunnel {}", tunnelId);

            TrafficSelector.Builder singleVlanSelector = DefaultTrafficSelector.builder()
                    .matchInPort(portCriterion.port())
                    .matchVlanId(innerVlanIdCriterion.vlanId());

            TrafficTreatment.Builder singleVlanTreatment = DefaultTrafficTreatment.builder()
                    // FIXME PW VLAN translation is not supported on Dune
                    //       Need to explore doing that in egress table later if there is a requirement
                    // .setVlanId(egressVlan)
                    .extension(new Ofdpa3SetMplsType(VPWS), deviceId)
                    .extension(new Ofdpa3SetMplsL2Port(mplsLogicalPort), deviceId)
                    .setTunnelId(tunnelId)
                    .transition(MPLS_L2_PORT_FLOW_TABLE);

            vlan1FlowRule = DefaultFlowRule.builder()
                    .forDevice(deviceId)
                    .withSelector(singleVlanSelector.build())
                    .withTreatment(singleVlanTreatment.build())
                    .withPriority(DEFAULT_PRIORITY)
                    .fromApp(applicationId)
                    .makePermanent()
                    .forTable(VLAN_TABLE)
                    .build();

            return ImmutableList.of(vlan1FlowRule);
        } else if ((innerVlanIdCriterion.vlanId().equals(VlanId.NONE))
                && (outerVlanIdCriterion.vlanId().equals(VlanId.NONE))) {

            TrafficSelector.Builder singleVlanSelector = DefaultTrafficSelector.builder()
                    .matchInPort(portCriterion.port())
                    .matchVlanId(innerVlanIdCriterion.vlanId());

            TrafficTreatment.Builder singleVlanTreatment = DefaultTrafficTreatment.builder()
                    .extension(new Ofdpa3SetMplsType(VPWS), deviceId)
                    .extension(new Ofdpa3SetMplsL2Port(mplsLogicalPort), deviceId)
                    .setTunnelId(tunnelId)
                    .transition(MPLS_L2_PORT_FLOW_TABLE);

            vlan1FlowRule = DefaultFlowRule.builder()
                    .forDevice(deviceId)
                    .withSelector(singleVlanSelector.build())
                    .withTreatment(singleVlanTreatment.build())
                    .withPriority(DEFAULT_PRIORITY)
                    .fromApp(applicationId)
                    .makePermanent()
                    .forTable(VLAN_TABLE)
                    .build();

            return ImmutableList.of(vlan1FlowRule);
        } else {
            // failure...
            return Collections.emptyList();
        }
    }

    @Override
    protected Collection<FlowRule> processEthTypeSpecific(ForwardingObjective fwd) {
        // if its not-bos, we go to MPLS_TYPE_TABLE regardless of whether we pop or swap
        // if it is bos, we go to MPLS_TYPE_TABLE only if we swap
        if (isNotMplsBos(fwd.selector())
                || (isMplsBos(fwd.selector()) && !isMplsPop(fwd))) {
            return processEthTypeSpecificInternal(fwd, true, MPLS_TYPE_TABLE);
        }
        // if it is bos, and we pop, we go to MPLS_L3_TYPE_TABLE
        return processEthTypeSpecificInternal(fwd, true, MPLS_L3_TYPE_TABLE);
    }

    @Override
    protected Collection<FlowRule> processVersatile(ForwardingObjective fwd) {
        // We use the tunnel id to identify pw related flows.
        // Looking for the fwd objective of the initiation.
        TunnelIdCriterion tunnelIdCriterion = (TunnelIdCriterion) fwd.selector()
                .getCriterion(TUNNEL_ID);
        if (tunnelIdCriterion != null) {
            return processInitPwVersatile(fwd);
        }
        // Looking for the fwd objective of the termination.
        ModTunnelIdInstruction modTunnelIdInstruction = getModTunnelIdInstruction(fwd.treatment());
        OutputInstruction outputInstruction = getOutputInstruction(fwd.treatment());
        if (modTunnelIdInstruction != null && outputInstruction != null) {
            return processTermPwVersatile(fwd, modTunnelIdInstruction, outputInstruction);
        }
        // If it is not a pseudo wire flow we fall back
        // to the OFDPA 2.0 pipeline.
        return super.processVersatile(fwd);
    }

    private Collection<FlowRule> processTermPwVersatile(ForwardingObjective forwardingObjective,
                                                        ModTunnelIdInstruction modTunnelIdInstruction,
                                                        OutputInstruction outputInstruction) {
        TrafficTreatment.Builder flowTreatment;
        TrafficSelector.Builder flowSelector;
        // We divide the mpls actions from the tunnel actions. We need
        // this to order the actions in the final treatment.
        TrafficTreatment.Builder mplsTreatment = DefaultTrafficTreatment.builder();
        createMplsTreatment(forwardingObjective.treatment(), mplsTreatment);
        // The match of the forwarding objective is ready to go.
        flowSelector = DefaultTrafficSelector.builder(forwardingObjective.selector());
        // We verify the tunnel id and mpls port are correct.
        long tunnelId = MPLS_TUNNEL_ID_BASE | modTunnelIdInstruction.tunnelId();
        if (tunnelId > MPLS_TUNNEL_ID_MAX) {
            log.error("Pw Versatile Forwarding Objective must include tunnel id < {}",
                      MPLS_TUNNEL_ID_MAX);
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        // 0x0002XXXX is NNI interface.
        int mplsLogicalPort = ((int) outputInstruction.port().toLong()) | MPLS_NNI_PORT_BASE;
        if (mplsLogicalPort > MPLS_NNI_PORT_MAX) {
            log.error("Pw Versatile Forwarding Objective invalid logical port {}",
                      mplsLogicalPort);
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        // Next id cannot be null.
        if (forwardingObjective.nextId() == null) {
            log.error("Pw Versatile Forwarding Objective must contain nextId ",
                      forwardingObjective.nextId());
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        // We retrieve the l2 interface group and point the mpls
        // flow to this.
        NextGroup next = getGroupForNextObjective(forwardingObjective.nextId());
        if (next == null) {
            log.warn("next-id:{} not found in dev:{}", forwardingObjective.nextId(), deviceId);
            fail(forwardingObjective, ObjectiveError.GROUPMISSING);
            return Collections.emptySet();
        }
        List<Deque<GroupKey>> gkeys = appKryo.deserialize(next.data());
        Group group = groupService.getGroup(deviceId, gkeys.get(0).peekFirst());
        if (group == null) {
            log.warn("Group with key:{} for next-id:{} not found in dev:{}",
                     gkeys.get(0).peekFirst(), forwardingObjective.nextId(), deviceId);
            fail(forwardingObjective, ObjectiveError.GROUPMISSING);
            return Collections.emptySet();
        }
        // We prepare the treatment for the mpls flow table.
        // The order of the actions has to be strictly this
        // according to the OFDPA 2.0 specification.
        flowTreatment = DefaultTrafficTreatment.builder(mplsTreatment.build());
        flowTreatment.extension(new Ofdpa3PopCw(), deviceId);
        // Even though the specification and the xml/json files
        // specify is allowed, the switch rejects the flow. In the
        // OFDPA 3.0 EA0 version was necessary
        //flowTreatment.popVlan();
        flowTreatment.extension(new Ofdpa3PopL2Header(), deviceId);
        flowTreatment.setTunnelId(tunnelId);
        flowTreatment.extension(new Ofdpa3SetMplsL2Port(mplsLogicalPort), deviceId);
        flowTreatment.extension(new Ofdpa3SetMplsType(VPWS), deviceId);
        flowTreatment.transition(MPLS_TYPE_TABLE);
        flowTreatment.deferred().group(group.id());
        // We prepare the flow rule for the mpls table.
        FlowRule.Builder ruleBuilder = DefaultFlowRule.builder()
                .fromApp(forwardingObjective.appId())
                .withPriority(forwardingObjective.priority())
                .forDevice(deviceId)
                .withSelector(flowSelector.build())
                .withTreatment(flowTreatment.build())
                .makePermanent()
                .forTable(MPLS_TABLE_1);
        return Collections.singletonList(ruleBuilder.build());
    }

    /**
     * Helper method to process the pw forwarding objectives.
     *
     * @param forwardingObjective the fw objective to process
     * @return a singleton list of flow rule
     */
    private Collection<FlowRule> processInitPwVersatile(ForwardingObjective forwardingObjective) {
        // We retrieve the matching criteria for mpls l2 port.
        TunnelIdCriterion tunnelIdCriterion = (TunnelIdCriterion) forwardingObjective.selector()
                .getCriterion(TUNNEL_ID);
        PortCriterion portCriterion = (PortCriterion) forwardingObjective.selector()
                .getCriterion(IN_PORT);
        TrafficSelector.Builder selector = DefaultTrafficSelector.builder();
        TrafficTreatment.Builder treatment = DefaultTrafficTreatment.builder();
        int mplsLogicalPort;
        long tunnelId;
        // Mpls tunnel ids according to the OFDPA manual have to be
        // in the range [2^17-1, 2^16].
        tunnelId = MPLS_TUNNEL_ID_BASE | tunnelIdCriterion.tunnelId();
        if (tunnelId > MPLS_TUNNEL_ID_MAX) {
            log.error("Pw Versatile Forwarding Objective must include tunnel id < {}",
                      MPLS_TUNNEL_ID_MAX);
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        // Port has not been null.
        if (portCriterion == null) {
            log.error("Pw Versatile Forwarding Objective must include port");
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        // 0x0000XXXX is UNI interface.
        if (portCriterion.port().toLong() > MPLS_UNI_PORT_MAX) {
            log.error("Pw Versatile Forwarding Objective invalid logical port {}",
                      portCriterion.port().toLong());
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        mplsLogicalPort = ((int) portCriterion.port().toLong());
        if (forwardingObjective.nextId() == null) {
            log.error("Pw Versatile Forwarding Objective must contain nextId ",
                      forwardingObjective.nextId());
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        // We don't expect a treatment.
        if (forwardingObjective.treatment() != null &&
                !forwardingObjective.treatment().equals(DefaultTrafficTreatment.emptyTreatment())) {
            log.error("Pw Versatile Forwarding Objective cannot contain a treatment ",
                      forwardingObjective.nextId());
            fail(forwardingObjective, ObjectiveError.BADPARAMS);
            return Collections.emptySet();
        }
        // We retrieve the l2 vpn group and point the mpls
        // l2 port to this.
        NextGroup next = getGroupForNextObjective(forwardingObjective.nextId());
        if (next == null) {
            log.warn("next-id:{} not found in dev:{}", forwardingObjective.nextId(), deviceId);
            fail(forwardingObjective, ObjectiveError.GROUPMISSING);
            return Collections.emptySet();
        }
        List<Deque<GroupKey>> gkeys = appKryo.deserialize(next.data());
        Group group = groupService.getGroup(deviceId, gkeys.get(0).peekFirst());
        if (group == null) {
            log.warn("Group with key:{} for next-id:{} not found in dev:{}",
                     gkeys.get(0).peekFirst(), forwardingObjective.nextId(), deviceId);
            fail(forwardingObjective, ObjectiveError.GROUPMISSING);
            return Collections.emptySet();
        }
        // We prepare the flow rule for the mpls l2 port table.
        selector.matchTunnelId(tunnelId);
        selector.extension(new Ofdpa3MatchMplsL2Port(mplsLogicalPort), deviceId);
        // This should not be necessary but without we receive an error
        treatment.extension(new Ofdpa3SetQosIndex(0), deviceId);
        treatment.transition(MPLS_L2_PORT_PCP_TRUST_FLOW_TABLE);
        treatment.deferred().group(group.id());
        FlowRule.Builder ruleBuilder = DefaultFlowRule.builder()
                .fromApp(forwardingObjective.appId())
                .withPriority(MPLS_L2_PORT_PRIORITY)
                .forDevice(deviceId)
                .withSelector(selector.build())
                .withTreatment(treatment.build())
                .makePermanent()
                .forTable(MPLS_L2_PORT_FLOW_TABLE);
        return Collections.singletonList(ruleBuilder.build());
    }

    /**
     * Helper method for dividing the tunnel instructions from the mpls
     * instructions.
     *
     * @param treatment the treatment to analyze
     * @param mplsTreatment the mpls treatment builder
     */
    private void createMplsTreatment(TrafficTreatment treatment,
                                     TrafficTreatment.Builder mplsTreatment) {

        for (Instruction ins : treatment.allInstructions()) {

            if (ins.type() == Instruction.Type.L2MODIFICATION) {
                L2ModificationInstruction l2ins = (L2ModificationInstruction) ins;
                switch (l2ins.subtype()) {
                    // These instructions have to go in the mpls
                    // treatment.
                    case TUNNEL_ID:
                        break;
                    case DEC_MPLS_TTL:
                    case MPLS_POP:
                        mplsTreatment.add(ins);
                        break;
                    default:
                        log.warn("Driver does not handle this type of TrafficTreatment"
                                         + " instruction in nextObjectives: {} - {}",
                                 ins.type(), ins);
                        break;
                }
            } else if (ins.type() == Instruction.Type.OUTPUT) {
                break;
            } else if (ins.type() == Instruction.Type.L3MODIFICATION) {
                // We support partially the l3 instructions.
                L3ModificationInstruction l3ins = (L3ModificationInstruction) ins;
                switch (l3ins.subtype()) {
                    case TTL_IN:
                        mplsTreatment.add(ins);
                        break;
                    default:
                        log.warn("Driver does not handle this type of TrafficTreatment"
                                         + " instruction in nextObjectives: {} - {}",
                                 ins.type(), ins);
                }

            } else {
                log.warn("Driver does not handle this type of TrafficTreatment"
                                 + " instruction in nextObjectives: {} - {}",
                         ins.type(), ins);
            }
        }
    }

}