diff --git a/tools/package/bin/onos b/tools/package/bin/onos
index a59ada2..2c37588 100755
--- a/tools/package/bin/onos
+++ b/tools/package/bin/onos
@@ -3,7 +3,7 @@
 # ONOS command-line client
 #-------------------------------------------------------------------------------
 
-export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64/
+export JAVA_HOME=${JAVA_HOME:-/usr/lib/jvm/java-7-openjdk-amd64/}
 
 cd $(dirname $0)/../apache-karaf-*/bin
 ./client -h localhost "$@"
diff --git a/tools/package/bin/onos-ctl b/tools/package/bin/onos-ctl
index e5ffe87..a5de5bd 100755
--- a/tools/package/bin/onos-ctl
+++ b/tools/package/bin/onos-ctl
@@ -3,8 +3,8 @@
 # Starts ONOS Apache Karaf container
 #-------------------------------------------------------------------------------
 
-export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64/
+export JAVA_HOME=${JAVA_HOME:-/usr/lib/jvm/java-7-openjdk-amd64/}
 
-cd $(dirname $0)/../apache-karaf-*/bin
-./karaf "$@"
+cd /opt/onos
+/opt/onos/apache-karaf-3.0.1/bin/karaf "$@"
 
diff --git a/tools/package/debian/onos.conf b/tools/package/debian/onos.conf
new file mode 100644
index 0000000..d398bda
--- /dev/null
+++ b/tools/package/debian/onos.conf
@@ -0,0 +1,21 @@
+description  "Open Networking Operating System"
+author       "ON.Lab"
+
+start on (net-device-up
+          and local-filesystems
+          and runlevel [2345])
+stop on runlevel [016]
+
+console output
+kill timeout 60
+respawn
+
+env LANG=en_US.UTF-8
+env JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64
+
+script
+  [ -f /opt/onos/options ] && . /opt/onos/options
+  start-stop-daemon --signal INT --start --chuid sdn \
+    --exec /opt/onos/bin/onos-ctl -- $ONOS_OPTS \
+        >/opt/onos/var/stdout.log 2>/opt/onos/var/stderr.log
+end script
diff --git a/tools/package/wrapper/bin/onos-service b/tools/package/wrapper/bin/onos-service
deleted file mode 100755
index 27da7a3..0000000
--- a/tools/package/wrapper/bin/onos-service
+++ /dev/null
@@ -1,557 +0,0 @@
-#! /bin/sh
-
-# ------------------------------------------------------------------------
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ------------------------------------------------------------------------
-
-# If require, set the JAVA_HOME to launch the wrapper
-#
-#JAVA_HOME=
-#
-
-# Application
-APP_NAME="onos"
-APP_LONG_NAME="onos"
-
-# Wrapper
-WRAPPER_CMD="/opt/onos/apache-karaf-3.0.1/bin/${APP_NAME}-wrapper"
-WRAPPER_CONF="/opt/onos/apache-karaf-3.0.1/etc/${APP_NAME}-wrapper.conf"
-
-# Priority at which to run the wrapper.  See "man nice" for valid priorities.
-#  nice is only used if a priority is specified.
-PRIORITY=
-
-# Location of the data folder.
-DATADIR="/opt/onos/apache-karaf-3.0.1/data"
-
-# Location of the pid file.
-PIDDIR="/opt/onos/apache-karaf-3.0.1/data"
-
-# If uncommented, causes the Wrapper to be shutdown using an anchor file.
-#  When launched with the 'start' command, it will also ignore all INT and
-#  TERM signals.
-#IGNORE_SIGNALS=true
-
-# If specified, the Wrapper will be run as the specified user.
-# IMPORTANT - Make sure that the user has the required privileges to write
-#  the PID file and wrapper.log files.  Failure to be able to write the log
-#  file will cause the Wrapper to exit without any way to write out an error
-#  message.
-# NOTE - This will set the user which is used to run the Wrapper as well as
-#  the JVM and is not useful in situations where a privileged resource or
-#  port needs to be allocated prior to the user being changed.
-#RUN_AS_USER=
-
-# The following two lines are used by the chkconfig command. Change as is
-#  appropriate for your application.  They should remain commented.
-# chkconfig: 2345 20 80
-# description: onos
-
-# Do not modify anything beyond this point
-#-----------------------------------------------------------------------------
-
-# Get the fully qualified path to the script
-case $0 in
-    /*)
-        SCRIPT="$0"
-        ;;
-    *)
-        PWD=`pwd`
-        SCRIPT="$PWD/$0"
-        ;;
-esac
-
-# Resolve the true real path without any sym links.
-CHANGED=true
-while [ "X$CHANGED" != "X" ]
-do
-    # Change spaces to ":" so the tokens can be parsed.
-    SCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
-    # Get the real path to this script, resolving any symbolic links
-    TOKENS=`echo $SCRIPT | sed -e 's;/; ;g'`
-    REALPATH=
-    for C in $TOKENS; do
-        REALPATH="$REALPATH/$C"
-        while [ -h "$REALPATH" ] ; do
-            LS="`ls -ld "$REALPATH"`"
-            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
-            if expr "$LINK" : '/.*' > /dev/null; then
-                REALPATH="$LINK"
-            else
-                REALPATH="`dirname "$REALPATH"`""/$LINK"
-            fi
-        done
-    done
-    # Change ":" chars back to spaces.
-    REALPATH=`echo $REALPATH | sed -e 's;:; ;g'`
-
-    if [ "$REALPATH" = "$SCRIPT" ]
-    then
-        CHANGED=""
-    else
-        SCRIPT="$REALPATH"
-    fi
-done
-
-# Change the current directory to the location of the script
-cd "`dirname "$REALPATH"`"
-REALDIR=`pwd`
-
-# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
-#  the working directory is later changed.
-FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    PIDDIR=$REALDIR/$PIDDIR
-fi
-# Same test for WRAPPER_CMD
-FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
-fi
-# Same test for WRAPPER_CONF
-FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
-fi
-
-# Process ID
-ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
-PIDFILE="$PIDDIR/$APP_NAME.pid"
-LOCKDIR="/var/lock/subsys"
-LOCKFILE="$LOCKDIR/$APP_NAME"
-pid=""
-
-# Resolve the location of the 'ps' command
-PSEXE="/usr/bin/ps"
-if [ ! -x $PSEXE ]
-then
-    PSEXE="/bin/ps"
-    if [ ! -x $PSEXE ]
-    then
-        echo "Unable to locate 'ps'."
-        echo "Please report this message along with the location of the command on your system."
-        exit 1
-    fi
-fi
-
-# Resolve the os
-DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
-case "$DIST_OS" in
-    'sunos')
-        DIST_OS="solaris"
-        ;;
-    'hp-ux' | 'hp-ux64')
-        DIST_OS="hpux"
-        ;;
-    'darwin')
-        DIST_OS="macosx"
-        ;;
-    'unix_sv')
-        DIST_OS="unixware"
-        ;;
-esac
-
-# Resolve the architecture
-DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]`
-if [ "$DIST_ARCH" = "unknown" ]
-then
-    DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
-fi
-case "$DIST_ARCH" in
-    'amd64' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
-        DIST_ARCH="x86"
-        ;;
-    'ip27')
-        DIST_ARCH="mips"
-        ;;
-    'power' | 'powerpc' | 'power_pc' | 'ppc64')
-        DIST_ARCH="ppc"
-        ;;
-    'pa_risc' | 'pa-risc')
-        DIST_ARCH="parisc"
-        ;;
-    'sun4u' | 'sparcv9')
-        DIST_ARCH="sparc"
-        ;;
-    '9000/800')
-        DIST_ARCH="parisc"
-        ;;
-esac
-
-# Decide on the wrapper binary to use.
-# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit
-#  platforms, if the 64-bit binary exists then the distribution most
-#  likely wants to use long names.  Otherwise, look for the default.
-# For macosx, we also want to look for universal binaries.
-WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
-if [ -x $WRAPPER_TEST_CMD ]
-then
-    WRAPPER_CMD="$WRAPPER_TEST_CMD"
-else
-    if [ "$DIST_OS" = "macosx" ]
-    then
-        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32"
-        if [ -x $WRAPPER_TEST_CMD ]
-        then
-            WRAPPER_CMD="$WRAPPER_TEST_CMD"
-        else
-            WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-            if [ -x $WRAPPER_TEST_CMD ]
-            then
-                WRAPPER_CMD="$WRAPPER_TEST_CMD"
-            else
-                WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64"
-                if [ -x $WRAPPER_TEST_CMD ]
-                then
-                    WRAPPER_CMD="$WRAPPER_TEST_CMD"
-                else
-                    if [ ! -x $WRAPPER_CMD ]
-                    then
-                        echo "Unable to locate any of the following binaries:"
-                        echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
-                        echo "  $WRAPPER_CMD-$DIST_OS-universal-32"
-                        echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-                        echo "  $WRAPPER_CMD-$DIST_OS-universal-64"
-                        echo "  $WRAPPER_CMD"
-                        exit 1
-                    fi
-                fi
-            fi
-        fi
-    else
-        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-        if [ -x $WRAPPER_TEST_CMD ]
-        then
-            WRAPPER_CMD="$WRAPPER_TEST_CMD"
-        else
-            if [ ! -x $WRAPPER_CMD ]
-            then
-                echo "Unable to locate any of the following binaries:"
-                echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
-                echo "  $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-                echo "  $WRAPPER_CMD"
-                exit 1
-            fi
-        fi
-    fi
-fi
-
-# Build the nice clause
-if [ "X$PRIORITY" = "X" ]
-then
-    CMDNICE=""
-else
-    CMDNICE="nice -$PRIORITY"
-fi
-
-# Build the anchor file clause.
-if [ "X$IGNORE_SIGNALS" = "X" ]
-then
-   ANCHORPROP=
-   IGNOREPROP=
-else
-   ANCHORPROP=wrapper.anchorfile=$ANCHORFILE
-   IGNOREPROP=wrapper.ignore_signals=TRUE
-fi
-
-# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
-if [ -d $LOCKDIR ]
-then
-    LOCKPROP=wrapper.lockfile=$LOCKFILE
-else
-    LOCKPROP=
-fi
-
-checkUser() {
-    # Check the configured user.  If necessary rerun this script as the desired user.
-    if [ "X$RUN_AS_USER" != "X" ]
-    then
-        # Resolve the location of the 'id' command
-        IDEXE="/usr/xpg4/bin/id"
-        if [ ! -x $IDEXE ]
-        then
-            IDEXE="/usr/bin/id"
-            if [ ! -x $IDEXE ]
-            then
-                echo "Unable to locate 'id'."
-                echo "Please report this message along with the location of the command on your system."
-                exit 1
-            fi
-        fi
-
-        if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
-        then
-            # Already running as the configured user.  Avoid password prompts by not calling su.
-            RUN_AS_USER=""
-        fi
-    fi
-    if [ "X$RUN_AS_USER" != "X" ]
-    then
-        # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
-        # able to create the lock file.  The Wrapper will be able to update this file once it
-        # is created but will not be able to delete it on shutdown.  If $2 is defined then
-        # the lock file should be created for the current command
-        if [ "X$LOCKPROP" != "X" ]
-        then
-            if [ "X$2" != "X" ]
-            then
-                # Resolve the primary group
-                RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
-                if [ "X$RUN_AS_GROUP" = "X" ]
-                then
-                    RUN_AS_GROUP=$RUN_AS_USER
-                fi
-                touch $LOCKFILE
-                chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
-            fi
-        fi
-
-        # Still want to change users, recurse.  This means that the user will only be
-        #  prompted for a password once.
-        su -m $RUN_AS_USER -s /bin/sh -c "$REALPATH $1"
-        RETVAL=$?
-
-        # Now that we are the original user again, we may need to clean up the lock file.
-        if [ "X$LOCKPROP" != "X" ]
-        then
-            getpid
-            if [ "X$pid" = "X" ]
-            then
-                # Wrapper is not running so make sure the lock file is deleted.
-                if [ -f $LOCKFILE ]
-                then
-                    rm $LOCKFILE
-                fi
-            fi
-        fi
-
-        exit $RETVAL
-    fi
-}
-
-getpid() {
-    if [ -f $PIDFILE ]
-    then
-        if [ -r $PIDFILE ]
-        then
-            pid=`cat $PIDFILE`
-            if [ "X$pid" != "X" ]
-            then
-                # It is possible that 'a' process with the pid exists but that it is not the
-                #  correct process.  This can happen in a number of cases, but the most
-                #  common is during system startup after an unclean shutdown.
-                # The ps statement below looks for the specific wrapper command running as
-                #  the pid.  If it is not found then the pid file is considered to be stale.
-                if [ "$DIST_OS" = "solaris" ]
-                then
-                    pidtest=`$PSEXE -p $pid -o comm | grep $WRAPPER_CMD | tail -1`
-                else
-                    pidtest=`$PSEXE -p $pid -o command | grep $WRAPPER_CMD | tail -1`
-                fi
-                if [ "X$pidtest" = "X" ]
-                then
-                    # This is a stale pid file.
-                    rm -f $PIDFILE
-                    echo "Removed stale pid file: $PIDFILE"
-                    pid=""
-                fi
-            fi
-        else
-            echo "Cannot read $PIDFILE."
-            exit 1
-        fi
-    fi
-}
-
-testpid() {
-    pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
-    if [ "X$pid" = "X" ]
-    then
-        # Process is gone so remove the pid file.
-        rm -f $PIDFILE
-        pid=""
-    fi
-}
-
-console() {
-    echo "Running $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE $ANCHORPROP $LOCKPROP"
-        exec $COMMAND_LINE
-    else
-        echo "$APP_LONG_NAME is already running."
-        exit 1
-    fi
-}
-
-start() {
-    echo "Starting $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        if [ ! -d $DATADIR ]; then
-            mkdir $DATADIR
-        fi
-        if [ ! -d $DATADIR/log ]; then
-            mkdir $DATADIR/log
-        fi
-        COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
-        exec $COMMAND_LINE
-    else
-        echo "$APP_LONG_NAME is already running."
-        exit 1
-    fi
-}
-
-stopit() {
-    echo "Stopping $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME was not running."
-    else
-        if [ "X$IGNORE_SIGNALS" = "X" ]
-        then
-            # Running so try to stop it.
-            kill $pid
-            if [ $? -ne 0 ]
-            then
-                # An explanation for the failure should have been given
-                echo "Unable to stop $APP_LONG_NAME."
-                exit 1
-            fi
-        else
-            rm -f $ANCHORFILE
-            if [ -f $ANCHORFILE ]
-            then
-                # An explanation for the failure should have been given
-                echo "Unable to stop $APP_LONG_NAME."
-                exit 1
-            fi
-        fi
-
-        # We can not predict how long it will take for the wrapper to
-        #  actually stop as it depends on settings in wrapper.conf.
-        #  Loop until it does.
-        savepid=$pid
-        CNT=0
-        TOTCNT=0
-        while [ "X$pid" != "X" ]
-        do
-            # Show a waiting message every 5 seconds.
-            if [ "$CNT" -lt "5" ]
-            then
-                CNT=`expr $CNT + 1`
-            else
-                echo "Waiting for $APP_LONG_NAME to exit..."
-                CNT=0
-            fi
-            TOTCNT=`expr $TOTCNT + 1`
-
-            sleep 1
-
-            testpid
-        done
-
-        pid=$savepid
-        testpid
-        if [ "X$pid" != "X" ]
-        then
-            echo "Failed to stop $APP_LONG_NAME."
-            exit 1
-        else
-            echo "Stopped $APP_LONG_NAME."
-        fi
-    fi
-}
-
-status() {
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME is not running."
-        exit 1
-    else
-        echo "$APP_LONG_NAME is running ($pid)."
-        exit 0
-    fi
-}
-
-dump() {
-    echo "Dumping $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME was not running."
-
-    else
-        kill -3 $pid
-
-        if [ $? -ne 0 ]
-        then
-            echo "Failed to dump $APP_LONG_NAME."
-            exit 1
-        else
-            echo "Dumped $APP_LONG_NAME."
-        fi
-    fi
-}
-
-case "$1" in
-
-    'console')
-        checkUser $1 touchlock
-        console
-        ;;
-
-    'start')
-        checkUser $1 touchlock
-        start
-        ;;
-
-    'stop')
-        checkUser $1
-        stopit
-        ;;
-
-    'restart')
-        checkUser $1 touchlock
-        stopit
-        start
-        ;;
-
-    'status')
-        checkUser $1
-        status
-        ;;
-
-    'dump')
-        checkUser $1
-        dump
-        ;;
-
-    *)
-        echo "Usage: $0 { console | start | stop | restart | status | dump }"
-        exit 1
-        ;;
-esac
-
-exit 0
diff --git a/tools/package/wrapper/bin/onos-wrapper b/tools/package/wrapper/bin/onos-wrapper
deleted file mode 100755
index 3128b95..0000000
--- a/tools/package/wrapper/bin/onos-wrapper
+++ /dev/null
Binary files differ
diff --git a/tools/package/wrapper/etc/onos-wrapper.conf b/tools/package/wrapper/etc/onos-wrapper.conf
deleted file mode 100644
index 6c6777b..0000000
--- a/tools/package/wrapper/etc/onos-wrapper.conf
+++ /dev/null
@@ -1,135 +0,0 @@
-# ------------------------------------------------------------------------
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ------------------------------------------------------------------------
-
-#********************************************************************
-# Wrapper Properties
-#********************************************************************
-set.default.JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64/
-set.default.KARAF_HOME=/opt/onos/apache-karaf-3.0.1
-set.default.KARAF_BASE=/opt/onos/apache-karaf-3.0.1
-set.default.KARAF_DATA=/opt/onos/apache-karaf-3.0.1/data
-set.default.KARAF_ETC=/opt/onos/apache-karaf-3.0.1/etc
-
-# Java Application
-wrapper.working.dir=%KARAF_BASE%
-wrapper.java.command=%JAVA_HOME%/bin/java
-wrapper.java.mainclass=org.apache.karaf.wrapper.internal.Main
-wrapper.java.classpath.1=%KARAF_HOME%/lib/karaf-wrapper.jar
-wrapper.java.classpath.2=%KARAF_HOME%/lib/karaf.jar
-wrapper.java.classpath.3=%KARAF_HOME%/lib/karaf-jmx-boot.jar
-wrapper.java.classpath.4=%KARAF_HOME%/lib/karaf-jaas-boot.jar
-wrapper.java.classpath.5=%KARAF_HOME%/lib/karaf-wrapper-main.jar
-wrapper.java.classpath.6=%KARAF_HOME%/lib/karaf-org.osgi.core.jar
-wrapper.java.library.path.1=%KARAF_HOME%/lib/
-
-# Application Parameters.  Add parameters as needed starting from 1
-#wrapper.app.parameter.1=
-
-# JVM Parameters            
-# note that n is the parameter number starting from 1.
-wrapper.java.additional.1=-Dkaraf.home=%KARAF_HOME%
-wrapper.java.additional.2=-Dkaraf.base=%KARAF_BASE%
-wrapper.java.additional.3=-Dkaraf.data=%KARAF_DATA%
-wrapper.java.additional.4=-Dkaraf.etc=%KARAF_ETC%
-wrapper.java.additional.5=-Dcom.sun.management.jmxremote
-wrapper.java.additional.6=-Djavax.management.builder.initial=org.apache.karaf.management.boot.KarafMBeanServerBuilder
-wrapper.java.additional.7=-Dkaraf.startLocalConsole=false
-wrapper.java.additional.8=-Dkaraf.startRemoteShell=true
-wrapper.java.additional.9=-Djava.endorsed.dirs=%JAVA_HOME%/jre/lib/endorsed:%JAVA_HOME%/lib/endorsed:%KARAF_HOME%/lib/endorsed
-wrapper.java.additional.10=-Djava.ext.dirs=%JAVA_HOME%/jre/lib/ext:%JAVA_HOME%/lib/ext:%KARAF_HOME%/lib/ext
-
-# Uncomment to enable jmx
-#wrapper.java.additional.n=-Dcom.sun.management.jmxremote.port=1616
-#wrapper.java.additional.n=-Dcom.sun.management.jmxremote.authenticate=false
-#wrapper.java.additional.n=-Dcom.sun.management.jmxremote.ssl=false
-
-# Uncomment to enable YourKit profiling
-#wrapper.java.additional.n=-Xrunyjpagent
-
-# Uncomment to enable remote debugging
-#wrapper.java.additional.n=-Xdebug -Xnoagent -Djava.compiler=NONE
-#wrapper.java.additional.n=-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005
-
-# Initial Java Heap Size (in MB)
-#wrapper.java.initmemory=3
-
-# Maximum Java Heap Size (in MB)
-wrapper.java.maxmemory=512
-
-
-#********************************************************************
-# Wrapper Logging Properties
-#********************************************************************
-# Format of output for the console.  (See docs for formats)
-wrapper.console.format=PM
-
-# Log Level for console output.  (See docs for log levels)
-wrapper.console.loglevel=INFO
-
-# Log file to use for wrapper output logging.
-wrapper.logfile=%KARAF_DATA%/log/wrapper.log
-
-# Format of output for the log file.  (See docs for formats)
-wrapper.logfile.format=LPTM
-
-# Log Level for log file output.  (See docs for log levels)
-wrapper.logfile.loglevel=INFO
-
-# Maximum size that the log file will be allowed to grow to before
-#  the log is rolled. Size is specified in bytes.  The default value
-#  of 0, disables log rolling.  May abbreviate with the 'k' (kb) or
-#  'm' (mb) suffix.  For example: 10m = 10 megabytes.
-wrapper.logfile.maxsize=10m
-
-# Maximum number of rolled log files which will be allowed before old
-#  files are deleted.  The default value of 0 implies no limit.
-wrapper.logfile.maxfiles=5
-
-# Log Level for sys/event log output.  (See docs for log levels)
-wrapper.syslog.loglevel=NONE
-
-#********************************************************************
-# Wrapper Windows Properties
-#********************************************************************
-# Title to use when running as a console
-wrapper.console.title=onos
-
-#********************************************************************
-# Wrapper Windows NT/2000/XP Service Properties
-#********************************************************************
-# WARNING - Do not modify any of these properties when an application
-#  using this configuration file has been installed as a service.
-#  Please uninstall the service before modifying this section.  The
-#  service can then be reinstalled.
-
-# Name of the service
-wrapper.ntservice.name=onos
-
-# Display name of the service
-wrapper.ntservice.displayname=onos
-
-# Description of the service
-wrapper.ntservice.description=ONOS
-
-# Service dependencies.  Add dependencies as needed starting from 1
-wrapper.ntservice.dependency.1=
-
-# Mode in which the service is installed.  AUTO_START or DEMAND_START
-wrapper.ntservice.starttype=AUTO_START
-
-# Allow the service to interact with the desktop.
-wrapper.ntservice.interactive=false
diff --git a/tools/package/wrapper/lib/karaf-wrapper.jar b/tools/package/wrapper/lib/karaf-wrapper.jar
deleted file mode 100644
index 4db355b..0000000
--- a/tools/package/wrapper/lib/karaf-wrapper.jar
+++ /dev/null
Binary files differ
diff --git a/tools/package/wrapper/lib/libwrapper.so b/tools/package/wrapper/lib/libwrapper.so
deleted file mode 100644
index 24197bf..0000000
--- a/tools/package/wrapper/lib/libwrapper.so
+++ /dev/null
Binary files differ