diff --git a/models/openconfig-odtn/src/main/yang/openconfig-transport-types.yang b/models/openconfig-odtn/src/main/yang/openconfig-transport-types.yang
new file mode 100644
index 0000000..247b973
--- /dev/null
+++ b/models/openconfig-odtn/src/main/yang/openconfig-transport-types.yang
@@ -0,0 +1,834 @@
+module openconfig-transport-types {
+
+  yang-version "1";
+
+  // namespace
+  namespace "http://openconfig.net/yang/transport-types";
+
+  prefix "oc-opt-types";
+
+  import openconfig-platform-types { prefix oc-platform-types; }
+  import openconfig-extensions { prefix oc-ext; }
+  import openconfig-types { prefix oc-types; }
+
+  // meta
+  organization "OpenConfig working group";
+
+  contact
+    "OpenConfig working group
+    www.openconfig.net";
+
+  description
+    "This module contains general type definitions and identities
+    for optical transport models.";
+
+  oc-ext:openconfig-version "0.6.0";
+
+  revision "2018-05-16" {
+    description
+      "Added interval,min,max time to interval stats.";
+    reference "0.6.0";
+  }
+
+  revision "2017-08-16" {
+    description
+      "Added ODU Cn protocol type";
+    reference "0.5.0";
+  }
+
+  revision "2016-12-22" {
+    description
+      "Fixes and additions for terminal optics model";
+    reference "0.4.0";
+  }
+
+  // typedef statements
+
+  typedef frequency-type {
+    type uint64;
+    units "MHz";
+    description
+      "Type for optical spectrum frequency values";
+  }
+
+  typedef admin-state-type {
+    type enumeration {
+      enum ENABLED {
+        description
+        "Sets the channel admin state to enabled";
+      }
+      enum DISABLED {
+        description
+        "Sets the channel admin state to disabled";
+      }
+      enum MAINT {
+        description
+        "Sets the channel to maintenance / diagnostic mode";
+      }
+    }
+    description "Administrative state modes for
+    logical channels in the transponder model.";
+  }
+
+  typedef loopback-mode-type {
+    type enumeration {
+      enum NONE {
+        description
+          "No loopback is applied";
+      }
+      enum FACILITY {
+        description
+          "A loopback which directs traffic normally transmitted
+          on the port back to the device as if received on the same
+          port from an external source.";
+      }
+      enum TERMINAL {
+        description
+          "A loopback which directs traffic received from an external
+          source on the port back out the transmit side of the same
+          port.";
+      }
+    }
+    default NONE;
+    description
+      "Loopback modes for transponder logical channels";
+  }
+
+  // grouping statements
+
+  grouping avg-min-max-instant-stats-precision2-ps-nm {
+    description
+      "Common grouping for recording picosecond per nanometer
+      values with 2 decimal precision. Values include the
+      instantaneous, average, minimum, and maximum statistics.
+      Statistics are computed and reported based on a moving time
+      interval (e.g., the last 30s).  If supported by the device,
+      the time interval over which the statistics are computed, and
+      the times at which the minimum and maximum values occurred,
+      are also reported.";
+
+    leaf instant {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps-nm;
+      description
+        "The instantaneous value of the statistic.";
+    }
+
+    leaf avg {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps-nm;
+      description
+        "The arithmetic mean value of the statistic over the
+        time interval.";
+    }
+
+    leaf min {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps-nm;
+      description
+        "The minimum value of the statistic over the time interval.";
+    }
+
+    leaf max {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps-nm;
+      description
+        "The maximum value of the statistic over the time interval.";
+    }
+
+    uses oc-types:stat-interval-state;
+    uses oc-types:min-max-time;
+  }
+
+  grouping avg-min-max-instant-stats-precision2-ps {
+    description
+      "Common grouping for recording picosecond values with
+      2 decimal precision. Values include the
+      instantaneous, average, minimum, and maximum statistics.
+      Statistics are computed and reported based on a moving time
+      interval (e.g., the last 30s).  If supported by the device,
+      the time interval over which the statistics are computed, and
+      the times at which the minimum and maximum values occurred,
+      are also reported.";
+
+    leaf instant {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps;
+      description
+        "The instantaneous value of the statistic.";
+    }
+
+    leaf avg {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps;
+      description
+        "The arithmetic mean value of the statistic over the
+        time interval.";
+    }
+
+    leaf min {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps;
+      description
+        "The minimum value of the statistic over the time interval.";
+    }
+
+    leaf max {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps;
+      description
+        "The maximum value of the statistic over the time interval.";
+    }
+
+    uses oc-types:stat-interval-state;
+    uses oc-types:min-max-time;
+  }
+
+  grouping avg-min-max-instant-stats-precision2-ps2 {
+    description
+      "Common grouping for recording picosecond^2 values with
+      2 decimal precision. Values include the
+      instantaneous, average, minimum, and maximum statistics.
+      Statistics are computed and reported based on a moving time
+      interval (e.g., the last 30s).  If supported by the device,
+      the time interval over which the statistics are computed, and
+      the times at which the minimum and maximum values occurred,
+      are also reported.";
+
+    leaf instant {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps^2;
+      description
+        "The instantaneous value of the statistic.";
+    }
+
+    leaf avg {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps^2;
+      description
+        "The arithmetic mean value of the statistic over the
+        time interval.";
+    }
+
+    leaf min {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps^2;
+      description
+        "The minimum value of the statistic over the time interval.";
+    }
+
+    leaf max {
+      type decimal64 {
+        fraction-digits 2;
+      }
+      units ps^2;
+      description
+        "The maximum value of the statistic over the time
+        interval.";
+    }
+
+    uses oc-types:stat-interval-state;
+    uses oc-types:min-max-time;
+  }
+
+  grouping avg-min-max-instant-stats-precision18-ber {
+    description
+      "Common grouping for recording bit error rate (BER) values
+      with 18 decimal precision. Note that decimal64 supports
+      values as small as i x 10^-18 where i is an integer. Values
+      smaller than this should be reported as 0 to inidicate error
+      free or near error free performance. Values include the
+      instantaneous, average, minimum, and maximum statistics.
+      Statistics are computed and reported based on a moving time
+      interval (e.g., the last 30s).  If supported by the device,
+      the time interval over which the statistics are computed, and
+      the times at which the minimum and maximum values occurred,
+      are also reported.";
+
+    leaf instant {
+      type decimal64 {
+        fraction-digits 18;
+      }
+      units bit-errors-per-second;
+      description
+        "The instantaneous value of the statistic.";
+    }
+
+    leaf avg {
+      type decimal64 {
+        fraction-digits 18;
+      }
+      units bit-errors-per-second;
+      description
+        "The arithmetic mean value of the statistic over the
+        time interval.";
+    }
+
+    leaf min {
+      type decimal64 {
+        fraction-digits 18;
+      }
+      units bit-errors-per-second;
+      description
+        "The minimum value of the statistic over the time
+        interval.";
+    }
+
+    leaf max {
+      type decimal64 {
+        fraction-digits 18;
+      }
+      units bit-errors-per-second;
+      description
+        "The maximum value of the statistic over the time
+        interval.";
+    }
+
+    uses oc-types:stat-interval-state;
+    uses oc-types:min-max-time;
+  }
+
+  // identity statements
+
+  identity TRIBUTARY_PROTOCOL_TYPE {
+    description
+      "Base identity for protocol framing used by tributary
+      signals.";
+  }
+
+  identity PROT_1GE {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "1G Ethernet protocol";
+  }
+
+  identity PROT_OC48 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OC48 protocol";
+  }
+
+  identity PROT_STM16 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "STM 16 protocol";
+  }
+
+  identity PROT_10GE_LAN {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "10G Ethernet LAN protocol";
+  }
+
+  identity PROT_10GE_WAN {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "10G Ethernet WAN protocol";
+  }
+
+  identity PROT_OC192 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OC 192 (9.6GB) port protocol";
+  }
+
+  identity PROT_STM64 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "STM 64 protocol";
+  }
+
+  identity PROT_OTU2 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OTU 2 protocol";
+  }
+
+  identity PROT_OTU2E {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OTU 2e protocol";
+  }
+
+  identity PROT_OTU1E {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OTU 1e protocol";
+  }
+
+  identity PROT_ODU2 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "ODU 2 protocol";
+  }
+
+  identity PROT_ODU2E {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "ODU 2e protocol";
+  }
+
+  identity PROT_40GE {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "40G Ethernet port protocol";
+  }
+
+  identity PROT_OC768 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OC 768 protocol";
+  }
+
+  identity PROT_STM256 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "STM 256 protocol";
+  }
+
+  identity PROT_OTU3 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OTU 3 protocol";
+  }
+
+  identity PROT_ODU3 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "ODU 3 protocol";
+  }
+
+  identity PROT_100GE {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "100G Ethernet protocol";
+  }
+
+  identity PROT_100G_MLG {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "100G MLG protocol";
+  }
+
+  identity PROT_OTU4 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OTU4 signal protocol (112G) for transporting
+    100GE signal";
+  }
+
+  identity PROT_OTUCN {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "OTU Cn protocol";
+  }
+
+  identity PROT_ODUCN {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "ODU Cn protocol";
+  }
+
+  identity PROT_ODU4 {
+    base TRIBUTARY_PROTOCOL_TYPE;
+    description "ODU 4 protocol";
+  }
+
+  identity TRANSCEIVER_FORM_FACTOR_TYPE {
+    description
+      "Base identity for identifying the type of pluggable optic
+      transceiver (i.e,. form factor) used in a port.";
+  }
+
+  identity CFP {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "C form-factor pluggable, that can support up to a
+      100 Gb/s signal with 10x10G or 4x25G physical channels";
+  }
+
+  identity CFP2 {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "1/2 C form-factor pluggable, that can support up to a
+      200 Gb/s signal with 10x10G, 4x25G, or 8x25G physical
+      channels";
+  }
+
+  identity CFP2_ACO {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "CFP2 analog coherent optics transceiver, supporting
+      100 Gb, 200Gb, and 250 Gb/s signal.";
+  }
+
+  identity CFP4 {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "1/4 C form-factor pluggable, that can support up to a
+      100 Gb/s signal with 10x10G or 4x25G physical channels";
+  }
+
+  identity QSFP {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "OriginalQuad Small Form-factor Pluggable transceiver that can
+      support 4x1G physical channels.  Not commonly used.";
+  }
+
+  identity QSFP_PLUS {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "Quad Small Form-factor Pluggable transceiver that can support
+      up to 4x10G physical channels.";
+  }
+
+  identity QSFP28 {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "QSFP pluggable optic with support for up to 4x28G physical
+      channels";
+  }
+
+  identity CPAK {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "Cisco CPAK transceiver supporting 100 Gb/s.";
+  }
+
+  identity SFP {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "Small form-factor pluggable transceiver supporting up to
+      10 Gb/s signal";
+  }
+
+  identity SFP_PLUS {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "Enhanced small form-factor pluggable transceiver supporting
+      up to 16 Gb/s signals, including 10 GbE and OTU2";
+  }
+
+  identity XFP {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "10 Gigabit small form factor pluggable transceiver supporting
+      10 GbE and OTU2";
+  }
+
+  identity X2 {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "10 Gigabit small form factor pluggable transceiver supporting
+      10 GbE using a XAUI inerface and 4 data channels.";
+  }
+
+  identity NON_PLUGGABLE {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "Represents a port that does not require a pluggable optic,
+      e.g., with on-board optics like COBO";
+  }
+
+  identity OTHER {
+    base TRANSCEIVER_FORM_FACTOR_TYPE;
+    description
+      "Represents a transceiver form factor not otherwise listed";
+  }
+
+  identity FIBER_CONNECTOR_TYPE {
+    description
+      "Type of optical fiber connector";
+  }
+
+  identity SC_CONNECTOR {
+    base FIBER_CONNECTOR_TYPE;
+    description
+      "SC type fiber connector";
+  }
+
+  identity LC_CONNECTOR {
+    base FIBER_CONNECTOR_TYPE;
+    description
+      "LC type fiber connector";
+  }
+
+  identity MPO_CONNECTOR {
+    base FIBER_CONNECTOR_TYPE;
+    description
+      "MPO (multi-fiber push-on/pull-off) type fiber connector
+      1x12 fibers";
+  }
+
+  identity ETHERNET_PMD_TYPE {
+    description
+      "Ethernet compliance codes (PMD) supported by transceivers";
+  }
+
+  identity ETH_10GBASE_LRM {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 10GBASE_LRM";
+  }
+
+  identity ETH_10GBASE_LR {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 10GBASE_LR";
+  }
+
+  identity ETH_10GBASE_ZR {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 10GBASE_ZR";
+  }
+
+  identity ETH_10GBASE_ER {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 10GBASE_ER";
+  }
+
+  identity ETH_10GBASE_SR {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 10GBASE_SR";
+  }
+
+  identity ETH_40GBASE_CR4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 40GBASE_CR4";
+  }
+
+  identity ETH_40GBASE_SR4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 40GBASE_SR4";
+  }
+
+  identity ETH_40GBASE_LR4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 40GBASE_LR4";
+  }
+
+  identity ETH_40GBASE_ER4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 40GBASE_ER4";
+  }
+
+  identity ETH_40GBASE_PSM4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 40GBASE_PSM4";
+  }
+
+  identity ETH_4X10GBASE_LR {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 4x10GBASE_LR";
+  }
+
+  identity ETH_4X10GBASE_SR {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 4x10GBASE_SR";
+  }
+
+  identity ETH_100G_AOC {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100G_AOC";
+  }
+
+  identity ETH_100G_ACC {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100G_ACC";
+  }
+
+  identity ETH_100GBASE_SR10 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_SR10";
+  }
+
+  identity ETH_100GBASE_SR4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_SR4";
+  }
+
+  identity ETH_100GBASE_LR4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_LR4";
+  }
+
+  identity ETH_100GBASE_ER4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_ER4";
+  }
+
+  identity ETH_100GBASE_CWDM4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_CWDM4";
+  }
+
+  identity ETH_100GBASE_CLR4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_CLR4";
+  }
+
+  identity ETH_100GBASE_PSM4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_PSM4";
+  }
+
+  identity ETH_100GBASE_CR4 {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: 100GBASE_CR4";
+  }
+
+  identity ETH_UNDEFINED {
+    base ETHERNET_PMD_TYPE;
+    description "Ethernet compliance code: undefined";
+  }
+
+  identity SONET_APPLICATION_CODE {
+    description
+      "Supported SONET/SDH application codes";
+  }
+
+  identity VSR2000_3R2 {
+    base SONET_APPLICATION_CODE;
+    description
+      "SONET/SDH application code: VSR2000_3R2";
+  }
+
+  identity VSR2000_3R3 {
+    base SONET_APPLICATION_CODE;
+    description
+      "SONET/SDH application code: VSR2000_3R3";
+  }
+
+  identity VSR2000_3R5 {
+    base SONET_APPLICATION_CODE;
+    description
+      "SONET/SDH application code: VSR2000_3R5";
+  }
+
+  identity SONET_UNDEFINED {
+    base SONET_APPLICATION_CODE;
+    description
+      "SONET/SDH application code: undefined";
+  }
+
+  identity OTN_APPLICATION_CODE {
+    description
+      "Supported OTN application codes";
+  }
+
+  identity P1L1_2D1 {
+    base OTN_APPLICATION_CODE;
+    description
+      "OTN application code: P1L1_2D1";
+  }
+
+  identity P1S1_2D2 {
+    base OTN_APPLICATION_CODE;
+    description
+      "OTN application code: P1S1_2D2";
+  }
+
+  identity P1L1_2D2 {
+    base OTN_APPLICATION_CODE;
+    description
+      "OTN application code: P1L1_2D2";
+  }
+
+  identity OTN_UNDEFINED {
+    base OTN_APPLICATION_CODE;
+    description
+      "OTN application code: undefined";
+  }
+
+  identity TRIBUTARY_RATE_CLASS_TYPE {
+    description
+      "Rate of tributary signal _- identities will typically reflect
+      rounded bit rate.";
+  }
+
+  identity TRIB_RATE_1G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "1G tributary signal rate";
+  }
+
+  identity TRIB_RATE_2.5G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "2.5G tributary signal rate";
+  }
+
+  identity TRIB_RATE_10G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "10G tributary signal rate";
+  }
+
+  identity TRIB_RATE_40G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "40G tributary signal rate";
+  }
+
+  identity TRIB_RATE_100G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "100G tributary signal rate";
+  }
+
+  identity TRIB_RATE_150G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "150G tributary signal rate";
+  }
+
+  identity TRIB_RATE_200G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "200G tributary signal rate";
+  }
+
+  identity TRIB_RATE_250G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "250G tributary signal rate";
+  }
+
+  identity TRIB_RATE_300G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "300G tributary signal rate";
+  }
+
+  identity TRIB_RATE_400G {
+    base TRIBUTARY_RATE_CLASS_TYPE;
+    description
+      "400G tributary signal rate";
+  }
+
+  identity LOGICAL_ELEMENT_PROTOCOL_TYPE {
+    description
+      "Type of protocol framing used on the logical channel or
+      tributary";
+  }
+
+  identity PROT_ETHERNET {
+    base LOGICAL_ELEMENT_PROTOCOL_TYPE;
+    description
+      "Ethernet protocol framing";
+  }
+
+  identity PROT_OTN {
+    base LOGICAL_ELEMENT_PROTOCOL_TYPE;
+    description
+      "OTN protocol framing";
+  }
+
+  identity OPTICAL_CHANNEL {
+    base oc-platform-types:OPENCONFIG_HARDWARE_COMPONENT;
+    description
+      "Optical channels act as carriers for transport traffic
+      directed over a line system.  They are represented as
+      physical components in the physical inventory model.";
+  }
+
+}