  module yrt-ietf-inet-types {

    yang-version 1;

    namespace
      "urn:ietf:params:xml:ns:yang:yrt-ietf-inet-types";

    prefix inet;

    organization
      "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

    contact
      "WG Web:   <http://tools.ietf.org/wg/netmod/>
    WG List:  <mailto:netmod@ietf.org>

    WG Chair: David Kessens
              <mailto:david.kessens@nsn.com>

    WG Chair: Juergen Schoenwaelder
              <mailto:j.schoenwaelder@jacobs-university.de>

    Editor:   Juergen Schoenwaelder
              <mailto:j.schoenwaelder@jacobs-university.de>";

    description
      "This module contains a collection of generally useful derived
    YANG data types for Internet addresses and related things.

    Copyright (c) 2013 IETF Trust and the persons identified as
    authors of the code.  All rights reserved.

    Redistribution and use in source and binary forms, with or
    without modification, is permitted pursuant to, and subject
    to the license terms contained in, the Simplified BSD License
    set forth in Section 4.c of the IETF Trust's Legal Provisions
    Relating to IETF Documents
    (http://trustee.ietf.org/license-info).

    This version of this YANG module is part of RFC 6991; see
    the RFC itself for full legal notices.";

    revision "2013-07-15" {
      description
        "This revision adds the following new data types:
      - ip-address-no-zone
      - ipv4-address-no-zone
      - ipv6-address-no-zone";
      reference
        "RFC 6991: Common YANG Data Types";

    }

    revision "2010-09-24" {
      description "Initial revision.";
      reference
        "RFC 6021: Common YANG Data Types";

    }


    typedef ip-version {
      type enumeration {
        enum "unknown" {
          value 0;
          description
            "An unknown or unspecified version of the Internet
          protocol.";
        }
        enum "ipv4" {
          value 1;
          description
            "The IPv4 protocol as defined in RFC 791.";
        }
        enum "ipv6" {
          value 2;
          description
            "The IPv6 protocol as defined in RFC 2460.";
        }
      }
      description
        "This value represents the version of the IP protocol.

      In the value set and its semantics, this type is equivalent
      to the InetVersion textual convention of the SMIv2.";
      reference
        "RFC  791: Internet Protocol
         RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
         RFC 4001: Textual Conventions for Internet Network Addresses";

    }

    typedef dscp {
      type uint8 {
        range "0..63";
      }
      description
        "The dscp type represents a Differentiated Services Code Point
      that may be used for marking packets in a traffic stream.
      In the value set and its semantics, this type is equivalent
      to the Dscp textual convention of the SMIv2.";
      reference
        "RFC 3289: Management Information Base for the Differentiated
        	  Services Architecture
         RFC 2474: Definition of the Differentiated Services Field
        	  (DS Field) in the IPv4 and IPv6 Headers
         RFC 2780: IANA Allocation Guidelines For Values In
        	  the Internet Protocol and Related Headers";

    }

    typedef ipv6-flow-label {
      type uint32 {
        range "0..1048575";
      }
      description
        "The ipv6-flow-label type represents the flow identifier or Flow
      Label in an IPv6 packet header that may be used to
      discriminate traffic flows.

      In the value set and its semantics, this type is equivalent
      to the IPv6FlowLabel textual convention of the SMIv2.";
      reference
        "RFC 3595: Textual Conventions for IPv6 Flow Label
         RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";

    }

    typedef port-number {
      type uint16 {
        range "0..65535";
      }
      description
        "The port-number type represents a 16-bit port number of an
      Internet transport-layer protocol such as UDP, TCP, DCCP, or
      SCTP.  Port numbers are assigned by IANA.  A current list of
      all assignments is available from <http://www.iana.org/>.

      Note that the port number value zero is reserved by IANA.  In
      situations where the value zero does not make sense, it can
      be excluded by subtyping the port-number type.
      In the value set and its semantics, this type is equivalent
      to the InetPortNumber textual convention of the SMIv2.";
      reference
        "RFC  768: User Datagram Protocol
         RFC  793: Transmission Control Protocol
         RFC 4960: Stream Control Transmission Protocol
         RFC 4340: Datagram Congestion Control Protocol (DCCP)
         RFC 4001: Textual Conventions for Internet Network Addresses";

    }

    typedef as-number {
      type uint32;
      description
        "The as-number type represents autonomous system numbers
      which identify an Autonomous System (AS).  An AS is a set
      of routers under a single technical administration, using
      an interior gateway protocol and common metrics to route
      packets within the AS, and using an exterior gateway
      protocol to route packets to other ASes.  IANA maintains
      the AS number space and has delegated large parts to the
      regional registries.

      Autonomous system numbers were originally limited to 16
      bits.  BGP extensions have enlarged the autonomous system
      number space to 32 bits.  This type therefore uses an uint32
      base type without a range restriction in order to support
      a larger autonomous system number space.

      In the value set and its semantics, this type is equivalent
      to the InetAutonomousSystemNumber textual convention of
      the SMIv2.";
      reference
        "RFC 1930: Guidelines for creation, selection, and registration
        	  of an Autonomous System (AS)
         RFC 4271: A Border Gateway Protocol 4 (BGP-4)
         RFC 4001: Textual Conventions for Internet Network Addresses
         RFC 6793: BGP Support for Four-Octet Autonomous System (AS)
        	  Number Space";

    }

    typedef ip-address {
      type union {
        type ipv4-address;
        type ipv6-address;
      }
      description
        "The ip-address type represents an IP address and is IP
      version neutral.  The format of the textual representation
      implies the IP version.  This type supports scoped addresses
      by allowing zone identifiers in the address format.";
      reference
        "RFC 4007: IPv6 Scoped Address Architecture";

    }

    typedef ipv4-address {
      type string {
        pattern
          '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?';
      }
      description
        "The ipv4-address type represents an IPv4 address in
       dotted-quad notation.  The IPv4 address may include a zone
       index, separated by a % sign.

       The zone index is used to disambiguate identical address
       values.  For link-local addresses, the zone index will
       typically be the interface index number or the name of an
       interface.  If the zone index is not present, the default
       zone of the device will be used.

       The canonical format for the zone index is the numerical
       format";
    }

    typedef ipv6-address {
      type string {
        pattern
          '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(%[\p{N}\p{L}]+)?';
        pattern
          '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)(%.+)?';
      }
      description
        "The ipv6-address type represents an IPv6 address in full,
      mixed, shortened, and shortened-mixed notation.  The IPv6
      address may include a zone index, separated by a % sign.

      The zone index is used to disambiguate identical address
      values.  For link-local addresses, the zone index will
      typically be the interface index number or the name of an
      interface.  If the zone index is not present, the default
      zone of the device will be used.


      The canonical format of IPv6 addresses uses the textual
      representation defined in Section 4 of RFC 5952.  The
      canonical format for the zone index is the numerical
      format as described in Section 11.2 of RFC 4007.";
      reference
        "RFC 4291: IP Version 6 Addressing Architecture
         RFC 4007: IPv6 Scoped Address Architecture
         RFC 5952: A Recommendation for IPv6 Address Text
        	  Representation";

    }

    typedef ip-address-no-zone {
      type union {
        type ipv4-address-no-zone;
        type ipv6-address-no-zone;
      }
      description
        "The ip-address-no-zone type represents an IP address and is
      IP version neutral.  The format of the textual representation
      implies the IP version.  This type does not support scoped
      addresses since it does not allow zone identifiers in the
      address format.";
      reference
        "RFC 4007: IPv6 Scoped Address Architecture";

    }

    typedef ipv4-address-no-zone {
      type ipv4-address {
        pattern '[0-9\.]*';
      }
      description
        "An IPv4 address without a zone index.  This type, derived from
       ipv4-address, may be used in situations where the zone is
       known from the context and hence no zone index is needed.";
    }

    typedef ipv6-address-no-zone {
      type ipv6-address {
        pattern '[0-9a-fA-F:\.]*';
      }
      description
        "An IPv6 address without a zone index.  This type, derived from
       ipv6-address, may be used in situations where the zone is
       known from the context and hence no zone index is needed.";
      reference
        "RFC 4291: IP Version 6 Addressing Architecture
         RFC 4007: IPv6 Scoped Address Architecture
         RFC 5952: A Recommendation for IPv6 Address Text
        	  Representation";

    }

    typedef ip-prefix {
      type union {
        type ipv4-prefix;
        type ipv6-prefix;
      }
      description
        "The ip-prefix type represents an IP prefix and is IP
      version neutral.  The format of the textual representations
      implies the IP version.";
    }

    typedef ipv4-prefix {
      type string {
        pattern
          '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])/(([0-9])|([1-2][0-9])|(3[0-2]))';
      }
      description
        "The ipv4-prefix type represents an IPv4 address prefix.
      The prefix length is given by the number following the
      slash character and must be less than or equal to 32.

      A prefix length value of n corresponds to an IP address
      mask that has n contiguous 1-bits from the most
      significant bit (MSB) and all other bits set to 0.

      The canonical format of an IPv4 prefix has all bits of
      the IPv4 address set to zero that are not part of the
      IPv4 prefix.";
    }

    typedef ipv6-prefix {
      type string {
        pattern
          '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
        pattern
          '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)(/.+)';
      }
      description
        "The ipv6-prefix type represents an IPv6 address prefix.
      The prefix length is given by the number following the
      slash character and must be less than or equal to 128.

      A prefix length value of n corresponds to an IP address
      mask that has n contiguous 1-bits from the most
      significant bit (MSB) and all other bits set to 0.

      The IPv6 address should have all bits that do not belong
      to the prefix set to zero.

      The canonical format of an IPv6 prefix has all bits of
      the IPv6 address set to zero that are not part of the
      IPv6 prefix.  Furthermore, the IPv6 address is represented
      as defined in Section 4 of RFC 5952.";
      reference
        "RFC 5952: A Recommendation for IPv6 Address Text
        	  Representation";

    }

    typedef domain-name {
      type string {
        length "1..253";
        pattern
          '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)|\.';
      }
      description
        "The domain-name type represents a DNS domain name.  The
      name SHOULD be fully qualified whenever possible.

      Internet domain names are only loosely specified.  Section
      3.5 of RFC 1034 recommends a syntax (modified in Section
      2.1 of RFC 1123).  The pattern above is intended to allow
      for current practice in domain name use, and some possible
      future expansion.  It is designed to hold various types of
      domain names, including names used for A or AAAA records
      (host names) and other records, such as SRV records.  Note
      that Internet host names have a stricter syntax (described
      in RFC 952) than the DNS recommendations in RFCs 1034 and
      1123, and that systems that want to store host names in
      schema nodes using the domain-name type are recommended to
      adhere to this stricter standard to ensure interoperability.

      The encoding of DNS names in the DNS protocol is limited
      to 255 characters.  Since the encoding consists of labels
      prefixed by a length bytes and there is a trailing NULL
      byte, only 253 characters can appear in the textual dotted
      notation.

      The description clause of schema nodes using the domain-name
      type MUST describe when and how these names are resolved to
      IP addresses.  Note that the resolution of a domain-name value
      may require to query multiple DNS records (e.g., A for IPv4
      and AAAA for IPv6).  The order of the resolution process and
      which DNS record takes precedence can either be defined
      explicitly or may depend on the configuration of the
      resolver.

      Domain-name values use the US-ASCII encoding.  Their canonical
      format uses lowercase US-ASCII characters.  Internationalized
      domain names MUST be A-labels as per RFC 5890.";
      reference
        "RFC  952: DoD Internet Host Table Specification
         RFC 1034: Domain Names - Concepts and Facilities
         RFC 1123: Requirements for Internet Hosts -- Application
        	  and Support
         RFC 2782: A DNS RR for specifying the location of services
        	  (DNS SRV)
         RFC 5890: Internationalized Domain Names in Applications
        	  (IDNA): Definitions and Document Framework";

    }

    typedef host {
      type union {
        type ip-address;
        type domain-name;
      }
      description
        "The host type represents either an IP address or a DNS
      domain name.";
    }

    typedef uri {
      type string;
      description
        "The uri type represents a Uniform Resource Identifier
      (URI) as defined by STD 66.

      Objects using the uri type MUST be in US-ASCII encoding,
      and MUST be normalized as described by RFC 3986 Sections
      6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
      percent-encoding is removed, and all case-insensitive
      characters are set to lowercase except for hexadecimal
      digits, which are normalized to uppercase as described in
      Section 6.2.2.1.

      The purpose of this normalization is to help provide
      unique URIs.  Note that this normalization is not
      sufficient to provide uniqueness.  Two URIs that are
      textually distinct after this normalization may still be
      equivalent.

      Objects using the uri type may restrict the schemes that
      they permit.  For example, 'data:' and 'urn:' schemes
      might not be appropriate.

      A zero-length URI is not a valid URI.  This can be used to
      express 'URI absent' where required.

      In the value set and its semantics, this type is equivalent
      to the Uri SMIv2 textual convention defined in RFC 5017.";
      reference
        "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
         RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
        	  Group: Uniform Resource Identifiers (URIs), URLs,
        	  and Uniform Resource Names (URNs): Clarifications
        	  and Recommendations
         RFC 5017: MIB Textual Conventions for Uniform Resource
        	  Identifiers (URIs)";

    }
  }  // module ietf-inet-types