add bsn_flow_idle extension
Similar to standard OpenFlow idle timeouts with a flow-removed notification,
but does not remove the flow.
diff --git a/openflow_input/bsn_flow_idle b/openflow_input/bsn_flow_idle
new file mode 100644
index 0000000..40a95d8
--- /dev/null
+++ b/openflow_input/bsn_flow_idle
@@ -0,0 +1,99 @@
+// Copyright 2013, Big Switch Networks, Inc.
+//
+// LoxiGen is licensed under the Eclipse Public License,
+// version 1.0 (EPL), with the following special exception:
+//
+// LOXI Exception
+//
+// As a special exception to the terms of the EPL, you may
+// distribute libraries generated by LoxiGen (LoxiGen Libraries)
+// under the terms of your choice, provided that copyright and
+// licensing notices generated by LoxiGen are not altered or removed
+// from the LoxiGen Libraries and the notice provided below is (i)
+// included in the LoxiGen Libraries, if distributed in source code
+// form and (ii) included in any documentation for the LoxiGen
+// Libraries, if distributed in binary form.
+//
+// Notice: "Copyright 2013, Big Switch Networks, Inc.
+// This library was generated by the LoxiGen Compiler."
+//
+// You may not use this file except in compliance with the EPL or
+// LOXI Exception. You may obtain a copy of the EPL at:
+//
+// http://www.eclipse.org/legal/epl-v10.html
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an "AS
+// IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+// express or implied. See the EPL for the specific language
+// governing permissions and limitations under the EPL.
+
+#version 4
+
+/*
+ * Notification of idle flows
+ *
+ * This extension allows the controller to request to be notified periodically
+ * about idle flows. It is very similar to the flow_removed message in standard
+ * OpenFlow, but does not delete the idle flows.
+ *
+ * If the extension is enabled using of_bsn_flow_idle_enable_set_request and
+ * the OFPFF_BSN_SEND_IDLE bit is set in the flow-mod, then the idle_timeout
+ * field in the flow-mod is not used for standard flow expiration. Instead,
+ * the switch will send an of_bsn_flow_idle message every idle_timeout seconds
+ * if the flow was not used during that period.
+ */
+
+struct of_bsn_flow_idle_enable_set_request : of_bsn_header {
+ uint8_t version;
+ uint8_t type == 4;
+ uint16_t length;
+ uint32_t xid;
+ uint32_t experimenter == 0x5c16c7;
+ uint32_t subtype == 36;
+ uint32_t enable; // 0 to disable the extension, 1 to enable it
+};
+
+struct of_bsn_flow_idle_enable_set_reply : of_bsn_header {
+ uint8_t version;
+ uint8_t type == 4;
+ uint16_t length;
+ uint32_t xid;
+ uint32_t experimenter == 0x5c16c7;
+ uint32_t subtype == 37;
+ uint32_t enable; // Resulting state, 0 disabled, 1 enabled
+ uint32_t status; // Result code: 0 success
+};
+
+struct of_bsn_flow_idle_enable_get_request : of_bsn_header {
+ uint8_t version;
+ uint8_t type == 4;
+ uint16_t length;
+ uint32_t xid;
+ uint32_t experimenter == 0x5c16c7;
+ uint32_t subtype == 38;
+};
+
+struct of_bsn_flow_idle_enable_get_reply : of_bsn_header {
+ uint8_t version;
+ uint8_t type == 4;
+ uint16_t length;
+ uint32_t xid;
+ uint32_t experimenter == 0x5c16c7;
+ uint32_t subtype == 39;
+ uint32_t enabled; // 0 if feature is disabled; 1 if feature enabled
+};
+
+struct of_bsn_flow_idle : of_bsn_header {
+ uint8_t version;
+ uint8_t type == 4;
+ uint16_t length;
+ uint32_t xid;
+ uint32_t experimenter == 0x5c16c7;
+ uint32_t subtype == 40;
+ uint64_t cookie;
+ uint16_t priority;
+ uint8_t table_id;
+ pad(5); // align to 8 bytes
+ of_match_t match;
+};