diff --git a/c_gen/c_code_gen.py b/c_gen/c_code_gen.py
index 640687f..a39c605 100644
--- a/c_gen/c_code_gen.py
+++ b/c_gen/c_code_gen.py
@@ -485,235 +485,6 @@
     c_match.gen_serialize(out)
     c_match.gen_deserialize(out)
 
-def gen_len_offset_macros(out):
-    """
-    Special case length and offset calculations put directly into
-    loci.c as they are private.
-    """
-
-    out.write("""
-/****************************************************************
- * Special case macros for calculating variable lengths and offsets
- ****************************************************************/
-
-/**
- * Get a u16 directly from an offset in an object's wire buffer
- * @param obj An of_object_t object
- * @param offset Base offset of the uint16 relative to the object
- *
- */
-
-static inline int
-of_object_u16_get(of_object_t *obj, int offset) {
-    uint16_t val16;
-
-    of_wire_buffer_u16_get(obj->wire_object.wbuf,
-        obj->wire_object.obj_offset + offset, &val16);
-
-    return (int)val16;
-}
-
-/**
- * Set a u16 directly at an offset in an object's wire buffer
- * @param obj An of_object_t object
- * @param offset Base offset of the uint16 relative to the object
- * @param val The value to store
- *
- */
-
-static inline void
-of_object_u16_set(of_object_t *obj, int offset, int value) {
-    uint16_t val16;
-
-    val16 = (uint16_t)value;
-    of_wire_buffer_u16_set(obj->wire_object.wbuf,
-        obj->wire_object.obj_offset + offset, val16);
-}
-
-/**
- * Get length of an object with a TLV header with uint16_t
- * @param obj An object with a match member
- * @param offset The wire offset of the start of the object
- *
- * The length field follows the type field.
- */
-
-#define _TLV16_LEN(obj, offset) \\
-    (of_object_u16_get((of_object_t *)(obj), (offset) + 2))
-
-/**
- * Get length of an object that is the "rest" of the object
- * @param obj An object with a match member
- * @param offset The wire offset of the start of the object
- *
- */
-
-#define _END_LEN(obj, offset) ((obj)->length - (offset))
-
-/**
- * Offset of the action_len member in a packet-out object
- */
-
-#define _PACKET_OUT_ACTION_LEN_OFFSET(obj) \\
-    (((obj)->version == OF_VERSION_1_0) ? 14 : 16)
-
-/**
- * Get length of the action list object in a packet_out object
- * @param obj An object of type of_packet_out
- */
-
-#define _PACKET_OUT_ACTION_LEN(obj) \\
-    (of_object_u16_get((of_object_t *)(obj), _PACKET_OUT_ACTION_LEN_OFFSET(obj)))
-
-/**
- * Set length of the action list object in a packet_out object
- * @param obj An object of type of_packet_out
- */
-
-#define _PACKET_OUT_ACTION_LEN_SET(obj, len) \\
-    (of_object_u16_set((of_object_t *)(obj), _PACKET_OUT_ACTION_LEN_OFFSET(obj), len))
-
-/*
- * Match structs in 1.2 come at the end of the fixed length part
- * of structures.  They add 8 bytes to the minimal length of the
- * message, but are also variable length.  This means that the
- * type/length offsets are 8 bytes back from the end of the fixed
- * length part of the object.  The right way to handle this is to
- * expose the offset of the match member more explicitly.  For now,
- * we make the calculation as described here.
- */
-
-/* 1.2 min length of match is 8 bytes */
-#define _MATCH_MIN_LENGTH_V3 8
-
-/**
- * The offset of a 1.2 match object relative to fixed length of obj
- */
-#define _MATCH_OFFSET_V3(fixed_obj_len) \\
-    ((fixed_obj_len) - _MATCH_MIN_LENGTH_V3)
-
-/**
- * The "extra" length beyond the minimal 8 bytes of a match struct
- * in an object
- */
-#define _MATCH_EXTRA_LENGTH_V3(obj, fixed_obj_len) \\
-    (OF_MATCH_BYTES(_TLV16_LEN(obj, _MATCH_OFFSET_V3(fixed_obj_len))) - \\
-     _MATCH_MIN_LENGTH_V3)
-
-/**
- * The offset of an object following a match object for 1.2
- */
-#define _OFFSET_FOLLOWING_MATCH_V3(obj, fixed_obj_len) \\
-    ((fixed_obj_len) + _MATCH_EXTRA_LENGTH_V3(obj, fixed_obj_len))
-
-/**
- * Get length of a match object from its wire representation
- * @param obj An object with a match member
- * @param match_offset The wire offset of the match object.
- *
- * See above; for 1.2,
- * The match length is raw bytes but the actual space it takes
- * up is padded for alignment to 64-bits
- */
-#define _WIRE_MATCH_LEN(obj, match_offset) \\
-    (((obj)->version == OF_VERSION_1_0) ? %(match1)d : \\
-     (((obj)->version == OF_VERSION_1_1) ? %(match2)d : \\
-      _TLV16_LEN(obj, match_offset)))
-
-#define _WIRE_LEN_MIN 4
-
-/*
- * Wrapper function for match len.  There are cases where the wire buffer
- * has not been set with the proper minimum length.  In this case, the
- * wire match len is interpretted as its minimum length, 4 bytes.
- */
-
-static inline int
-wire_match_len(of_object_t *obj, int match_offset) {
-    int len;
-
-    len = _WIRE_MATCH_LEN(obj, match_offset);
-
-    return (len == 0) ? _WIRE_LEN_MIN : len;
-}
-
-#define _WIRE_MATCH_PADDED_LEN(obj, match_offset) \\
-    OF_MATCH_BYTES(wire_match_len((of_object_t *)(obj), (match_offset)))
-
-/**
- * Macro to calculate variable offset of instructions member in flow mod
- * @param obj An object of some type of flow modify/add/delete
- *
- * Get length of preceding match object and add to fixed length
- * Applies only to version 1.2
- */
-
-#define _FLOW_MOD_INSTRUCTIONS_OFFSET(obj) \\
-    _OFFSET_FOLLOWING_MATCH_V3(obj, %(flow_mod)d)
-
-/* The different flavors of flow mod all use the above */
-#define _FLOW_ADD_INSTRUCTIONS_OFFSET(obj) \\
-    _FLOW_MOD_INSTRUCTIONS_OFFSET(obj)
-#define _FLOW_MODIFY_INSTRUCTIONS_OFFSET(obj) \\
-    _FLOW_MOD_INSTRUCTIONS_OFFSET(obj)
-#define _FLOW_MODIFY_STRICT_INSTRUCTIONS_OFFSET(obj) \\
-    _FLOW_MOD_INSTRUCTIONS_OFFSET(obj)
-#define _FLOW_DELETE_INSTRUCTIONS_OFFSET(obj) \\
-    _FLOW_MOD_INSTRUCTIONS_OFFSET(obj)
-#define _FLOW_DELETE_STRICT_INSTRUCTIONS_OFFSET(obj) \\
-    _FLOW_MOD_INSTRUCTIONS_OFFSET(obj)
-
-/**
- * Macro to calculate variable offset of instructions member in flow stats
- * @param obj An object of type of_flow_mod_t
- *
- * Get length of preceding match object and add to fixed length
- * Applies only to version 1.2 and 1.3
- */
-
-#define _FLOW_STATS_ENTRY_INSTRUCTIONS_OFFSET(obj) \\
-    _OFFSET_FOLLOWING_MATCH_V3(obj, %(flow_stats)d)
-
-/**
- * Macro to calculate variable offset of data (packet) member in packet_in
- * @param obj An object of type of_packet_in_t
- *
- * Get length of preceding match object and add to fixed length
- * Applies only to version 1.2 and 1.3
- * The +2 comes from the 2 bytes of padding between the match and packet data.
- */
-
-#define _PACKET_IN_DATA_OFFSET(obj) \\
-    (_OFFSET_FOLLOWING_MATCH_V3((obj), (obj)->version == OF_VERSION_1_2 ? \
-%(packet_in)d : %(packet_in_1_3)d) + 2)
-
-/**
- * Macro to calculate variable offset of data (packet) member in packet_out
- * @param obj An object of type of_packet_out_t
- *
- * Find the length in the actions_len variable and add to the fixed len
- * Applies only to version 1.2 and 1.3
- */
-
-#define _PACKET_OUT_DATA_OFFSET(obj) (_PACKET_OUT_ACTION_LEN(obj) + \\
-     of_object_fixed_len[(obj)->version][OF_PACKET_OUT])
-
-/**
- * Macro to map port numbers that changed across versions
- * @param port The port_no_t variable holding the value
- * @param ver The OpenFlow version from which the value was extracted
- */
-#define OF_PORT_NO_VALUE_CHECK(port, ver) \\
-    if (((ver) == OF_VERSION_1_0) && ((port) > 0xff00)) (port) += 0xffff0000
-
-""" % dict(flow_mod=of_g.base_length[("of_flow_modify",of_g.VERSION_1_2)],
-           packet_in=of_g.base_length[("of_packet_in",of_g.VERSION_1_2)],
-           packet_in_1_3=of_g.base_length[("of_packet_in",of_g.VERSION_1_3)],
-           flow_stats=of_g.base_length[("of_flow_stats_entry",
-                                        of_g.VERSION_1_2)],
-           match1=of_g.base_length[("of_match_v1",of_g.VERSION_1_0)],
-           match2=of_g.base_length[("of_match_v2",of_g.VERSION_1_1)]))
-
 def gen_obj_id_macros(out):
     """
     Flow modify (add, delete) messages (and maybe others) use ID checks allowing
@@ -786,10 +557,10 @@
 #include <loci/of_object.h>
 #include "loci_log.h"
 #include "loci_push_wire_types.h"
+#include "loci_int.h"
 
 """)
     gen_object_enum_str(out)
-    gen_len_offset_macros(out)
     gen_obj_id_macros(out)
     if config_check("gen_unified_fns"):
         gen_accessor_definitions(out)