Run onos-secure-ssh for ssh-based onos cli login
Change-Id: I073efa00b0e6c790f9b73c7da89c0595b1949555
diff --git a/TestON/tests/SCPF/SCPFflowTp1g/SCPFflowTp1g.py b/TestON/tests/SCPF/SCPFflowTp1g/SCPFflowTp1g.py
index c87546a..50ca811 100644
--- a/TestON/tests/SCPF/SCPFflowTp1g/SCPFflowTp1g.py
+++ b/TestON/tests/SCPF/SCPFflowTp1g/SCPFflowTp1g.py
@@ -129,11 +129,13 @@
main.log.report( "ONOS " + str(node) + " didn't start!" )
for node in range(1, clusterCount + 1):
+ secureSshResult = main.ONOSbench.onosSecureSSH( ONOSIp[node] )
exec "a = main.ONOS%scli.startOnosCli" %str(node)
a(ONOSIp[node])
main.log.info("Startup sequence complete")
main.ONOSbench.logReport(ONOSIp[1], ["ERROR", "WARNING", "EXCEPT"], outputMode="d")
+
def CASE2( self, main ):
#
# This is the flow TP test
diff --git a/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py b/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py
index ddcf813..42159b4 100644
--- a/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py
+++ b/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py
@@ -178,6 +178,14 @@
onfail="Test step FAIL" )
statusResult = ( statusResult and onos_status )
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
main.step(" Start ONOS cli using thread ")
diff --git a/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py b/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py
index 04d99c4..42c3522 100644
--- a/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py
+++ b/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py
@@ -176,6 +176,15 @@
onfail="Test step FAIL")
statusResult = (statusResult and onos_status)
time.sleep(2)
+
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
main.step( "Start ONOS cli using thread" )
startCliResult = main.TRUE
pool = []
diff --git a/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py b/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py
index 0b8a465..1c04fd1 100644
--- a/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py
+++ b/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py
@@ -173,6 +173,15 @@
onpass="Test step PASS",
onfail="Test step FAIL")
statusResult = (statusResult and onos_status)
+
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
time.sleep(2)
main.step("Start ONOS CLI on all nodes")
cliResult = main.TRUE
diff --git a/TestON/tests/SCPF/SCPFintentRerouteLat/SCPFintentRerouteLat.py b/TestON/tests/SCPF/SCPFintentRerouteLat/SCPFintentRerouteLat.py
index 099c57d..e861f0c 100644
--- a/TestON/tests/SCPF/SCPFintentRerouteLat/SCPFintentRerouteLat.py
+++ b/TestON/tests/SCPF/SCPFintentRerouteLat/SCPFintentRerouteLat.py
@@ -188,6 +188,15 @@
onpass="Test step PASS",
onfail="Test step FAIL")
statusResult = (statusResult and onos_status)
+
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
time.sleep(2)
main.step("Start ONOS CLI on all nodes")
cliResult = main.TRUE
diff --git a/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py b/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py
index ec00d30..59dc3a1 100644
--- a/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py
+++ b/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py
@@ -178,6 +178,15 @@
onfail="Test step FAIL")
statusResult = statusResult and onos_status
time.sleep(2)
+
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
main.step( " Start ONOS cli using thread " )
diff --git a/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.py b/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.py
index 86a99fd..7c2e2d2 100644
--- a/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.py
+++ b/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.py
@@ -237,6 +237,14 @@
onpass="ONOS service is ready",
onfail="ONOS service did not start properly" )
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
main.step( "Start ONOS cli" )
cliResult = main.TRUE
main.activeNodes = []
diff --git a/TestON/tests/SCPF/SCPFscaleTopo/dependencies/scaleTopoFunction.py b/TestON/tests/SCPF/SCPFscaleTopo/dependencies/scaleTopoFunction.py
index d05e2a7..a5d122e 100644
--- a/TestON/tests/SCPF/SCPFscaleTopo/dependencies/scaleTopoFunction.py
+++ b/TestON/tests/SCPF/SCPFscaleTopo/dependencies/scaleTopoFunction.py
@@ -435,6 +435,16 @@
else:
main.log.error( main.topoName + ": Failed to start ONOS cluster" )
+ main.log.info( main.topoName + ": set up ONOS secure SSH" )
+ secureSshResult = []
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult.append( main..onosSecureSSH( node=main.ONOSip[i] ) )
+ if all( result == main.TRUE for result in secureSshResult ):
+ main.log.info( main.topoName + ": Successfully set up ONOS secure SSH" )
+ else:
+ main.log.error( main.topoName + ": Failed to set up ONOS secure SSH" )
+ restartResult = main.FALSE
+
main.log.info( main.topoName + ": Starting ONOS CLI" )
cliResult = []
for i in range( main.numCtrls ):
diff --git a/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py b/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py
index fc05de6..a7a7bc5 100644
--- a/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py
+++ b/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py
@@ -202,6 +202,14 @@
onfail="Test step FAIL" )
statusResult = ( statusResult and onos_status )
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
main.step(" Start ONOS cli using thread ")
diff --git a/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py b/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py
index ceacb73..3fef087 100644
--- a/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py
+++ b/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py
@@ -180,6 +180,15 @@
onpass="Test step PASS",
onfail="Test step FAIL")
statusResult = (statusResult and onos_status)
+
+ main.step( "Set up ONOS secure SSH" )
+ secureSshResult = main.TRUE
+ for i in range( int( main.numCtrls ) ):
+ secureSshResult = secureSshResult and main.ONOSbench.onosSecureSSH( node=main.ONOSip[i] )
+ utilities.assert_equals( expect=main.TRUE, actual=secureSshResult,
+ onpass="Test step PASS",
+ onfail="Test step FAIL" )
+
time.sleep(2)
main.step("Start ONOS CLI on all nodes")
cliResult = main.TRUE