shorter the peer name to show the vlan tag
Change-Id: I67a10b5bd8c6defc762725a0876fc5662dda5f2a
diff --git a/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py b/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py
index 81cfca5..c3e4321 100755
--- a/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py
+++ b/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py
@@ -39,9 +39,9 @@
Topo.__init__( self, *args, **kwargs )
# BGP peer hosts
- peer64514 = self.addHost( 'peer64514' )
- peer64515 = self.addHost( 'peer64515' )
- peer64516 = self.addHost( 'peer64516' )
+ pr64514 = self.addHost( 'pr64514' )
+ pr64515 = self.addHost( 'pr64515' )
+ pr64516 = self.addHost( 'pr64516' )
'''
sw1 = self.addSwitch( 'SEAT', dpid = '00000000000000a1' )
@@ -198,19 +198,19 @@
self.addLink( sw38, sw39 )
# connection between switches and peers
- self.addLink( peer64514, sw32 )
- self.addLink( peer64515, sw8 )
- self.addLink( peer64516, sw28 )
+ self.addLink( pr64514, sw32 )
+ self.addLink( pr64515, sw8 )
+ self.addLink( pr64516, sw28 )
# connection between BGP peer and hosts behind the BGP peer
- self.addLink( peer64514, host64514 )
- self.addLink( peer64515, host64515 )
- self.addLink( peer64516, host64516 )
+ self.addLink( pr64514, host64514 )
+ self.addLink( pr64515, host64515 )
+ self.addLink( pr64516, host64516 )
# Internal Connection To Hosts
- self.addLink( swCtl100, peer64514 )
- self.addLink( swCtl100, peer64515 )
- self.addLink( swCtl100, peer64516 )
+ self.addLink( swCtl100, pr64514 )
+ self.addLink( swCtl100, pr64515 )
+ self.addLink( swCtl100, pr64516 )
self.addLink( swCtl100, speaker1 )
self.addLink( swCtl100, speaker2 )
@@ -278,9 +278,9 @@
net = Mininet( topo = topo, controller = RemoteController )
- speaker1, speaker2, peer64514, peer64515, peer64516 = \
+ speaker1, speaker2, pr64514, pr64515, pr64516 = \
net.get( 'speaker1', 'speaker2' ,
- 'peer64514', 'peer64515', 'peer64516' )
+ 'pr64514', 'pr64515', 'pr64516' )
# Adding addresses to host64513_1 interface connected to sw24
# for BGP peering
@@ -298,35 +298,35 @@
# setup configuration on the interface connected to switch
- peer64514.setMAC( '00:00:00:00:00:04', 'peer64514-eth0' )
- peer64514.cmd( "sudo vconfig add peer64514-eth0 %d" % vlanId )
- peer64514.cmd( "ip addr add 10.0.4.1/24 dev peer64514-eth0.%d" % vlanId )
+ pr64514.setMAC( '00:00:00:00:00:04', 'pr64514-eth0' )
+ pr64514.cmd( "sudo vconfig add pr64514-eth0 %s" % vlanId )
+ pr64514.cmd( "ip addr add 10.0.4.1/24 dev pr64514-eth0.%s" % vlanId )
- peer64515.setMAC( '00:00:00:00:00:05', 'peer64515-eth0' )
- peer64515.cmd( "sudo vconfig add peer64515-eth0 %d" % vlanId )
- peer64515.cmd( "ip addr add 10.0.5.1/24 dev peer64515-eth0.%d" % vlanId )
+ pr64515.setMAC( '00:00:00:00:00:05', 'pr64515-eth0' )
+ pr64515.cmd( "sudo vconfig add pr64515-eth0 %s" % vlanId )
+ pr64515.cmd( "ip addr add 10.0.5.1/24 dev pr64515-eth0.%d" % vlanId )
- peer64516.setMAC( '00:00:00:00:00:06', 'peer64516-eth0' )
- peer64516.cmd( "sudo vconfig add peer64516-eth0 %d" % vlanId )
- peer64516.cmd( "ip addr add 10.0.6.1/24 dev peer64516-eth0.%d" % vlanId )
+ pr64516.setMAC( '00:00:00:00:00:06', 'pr64516-eth0' )
+ pr64516.cmd( "sudo vconfig add pr64516-eth0 %d" % vlanId )
+ pr64516.cmd( "ip addr add 10.0.6.1/24 dev pr64516-eth0.%d" % vlanId )
# setup configuration on the interface connected to hosts
- peer64514.setIP( "4.0.0.254", 8, "peer64514-eth1" )
- peer64514.setMAC( '00:00:00:00:00:44', 'peer64514-eth1' )
- peer64515.setIP( "5.0.0.254", 8, "peer64515-eth1" )
- peer64515.setMAC( '00:00:00:00:00:55', 'peer64515-eth1' )
- peer64516.setIP( "6.0.0.254", 8, "peer64516-eth1" )
- peer64516.setMAC( '00:00:00:00:00:66', 'peer64516-eth1' )
+ pr64514.setIP( "4.0.0.254", 8, "pr64514-eth1" )
+ pr64514.setMAC( '00:00:00:00:00:44', 'pr64514-eth1' )
+ pr64515.setIP( "5.0.0.254", 8, "pr64515-eth1" )
+ pr64515.setMAC( '00:00:00:00:00:55', 'pr64515-eth1' )
+ pr64516.setIP( "6.0.0.254", 8, "pr64516-eth1" )
+ pr64516.setMAC( '00:00:00:00:00:66', 'pr64516-eth1' )
# enable forwarding on BGP peer hosts
- peer64514.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
- peer64515.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
- peer64516.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
+ pr64514.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
+ pr64515.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
+ pr64516.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
# config interface for control plane connectivity
- peer64514.setIP( "192.168.0.4", 24, "peer64514-eth2" )
- peer64515.setIP( "192.168.0.5", 24, "peer64515-eth2" )
- peer64516.setIP( "192.168.0.6", 24, "peer64516-eth2" )
+ pr64514.setIP( "192.168.0.4", 24, "pr64514-eth2" )
+ pr64515.setIP( "192.168.0.5", 24, "pr64515-eth2" )
+ pr64516.setIP( "192.168.0.6", 24, "pr64516-eth2" )
# Setup hosts in each non-SDN AS
host64514, host64515, host64516 = \
@@ -356,9 +356,9 @@
for i in range ( 64514, 64516 + 1 ):
startquagga( 'peer%s' % ( i ), i, 'quagga%s.conf' % ( i ) )
'''
- startquagga( peer64514, 64514, 'quagga64514.conf' )
- startquagga( peer64515, 64515, 'quagga64515.conf' )
- startquagga( peer64516, 64516, 'quagga64516.conf' )
+ startquagga( pr64514, 64514, 'quagga64514.conf' )
+ startquagga( pr64515, 64515, 'quagga64515.conf' )
+ startquagga( pr64516, 64516, 'quagga64516.conf' )
# start Quagga in SDN network
startquagga( speaker1, 64513, 'quagga-sdn.conf' )
@@ -373,7 +373,7 @@
stopsshd()
- hosts = [ peer64514, peer64515, peer64516, host64514];
+ hosts = [ pr64514, pr64515, pr64516, host64514];
startsshds( hosts )
#
'''