diff --git a/TestON/tests/PeeringRouterTest/PeeringRouterTest.py b/TestON/tests/PeeringRouterTest/PeeringRouterTest.py
index cddea0a..e199d74 100755
--- a/TestON/tests/PeeringRouterTest/PeeringRouterTest.py
+++ b/TestON/tests/PeeringRouterTest/PeeringRouterTest.py
@@ -1267,3 +1267,629 @@
         main.Mininet.stopNet()
         time.sleep(10)
 
+    # Route convergence and connectivity test in VLAN configuration
+    def CASE31( self, main):
+        import time
+        import json
+        from operator import eq
+        # from datetime import datetime
+        from time import localtime, strftime
+
+        main.case("The test case is to help to setup the TestON environment \
+            and test new drivers" )
+        TESTCASE_ROOT_PATH = main.params[ 'ENV' ][ 'home' ]
+        TESTCASE_MININET_ROOT_PATH = TESTCASE_ROOT_PATH + "/vlan/routeconvergence/mininet"
+        SDNIPJSONFILEPATH = TESTCASE_ROOT_PATH + "/vlan/sdnip.json"
+        main.log.info("sdnip.json file path: "+ SDNIPJSONFILEPATH)
+        
+        # Copy the json files to config dir
+        main.ONOSbench.handle.sendline("cp " + TESTCASE_ROOT_PATH + "/vlan/addresses.json ~/onos/tools/package/config/")
+        main.ONOSbench.handle.sendline("cp " + TESTCASE_ROOT_PATH + "/vlan/sdnip.json ~/onos/tools/package/config/")
+
+        # Launch mininet topology for this case        
+        MININET_TOPO_FILE = TESTCASE_MININET_ROOT_PATH + "/PeeringRouterConvergenceVlanMininet.py"
+        main.step( "Launch mininet" )
+        main.Mininet.handle.sendline("sudo python " + MININET_TOPO_FILE + " " + TESTCASE_MININET_ROOT_PATH)
+        main.step("waiting 20 secs for all switches and quagga instances to comeup")
+        time.sleep(20)
+        main.step( "Test whether Mininet is started" )
+        main.log.info( "Login Quagga CLI on host3" )
+        result = main.QuaggaCliHost3.loginQuagga( "1.168.30.2" )
+        #if result is not main.TRUE:
+        #     main.log.report("Mininet is not started...Aborting")
+        #     main.Mininet.stopNet()
+        #     main.cleanup()
+        #     main.exit()
+        # all expected routes for all BGP peers
+        allRoutesExpected = []
+        main.step( "Start to generate routes for all BGP peers" )
+        main.log.info( "Generate prefixes for host3" )
+
+        prefixesHost3 = main.QuaggaCliHost3.generatePrefixes( 3, 10 )
+        main.log.info( prefixesHost3 )
+        # generate route with next hop
+        for prefix in prefixesHost3:
+            allRoutesExpected.append( prefix + "/" + "192.168.20.1" )
+        routeIntentsExpectedHost3 = \
+            main.QuaggaCliHost3.generateExpectedOnePeerRouteIntents(
+            prefixesHost3, "192.168.20.1", "00:00:00:00:02:02",
+            SDNIPJSONFILEPATH )
+
+        main.log.info( "Generate prefixes for host4" )
+        prefixesHost4 = main.QuaggaCliHost4.generatePrefixes( 4, 10 )
+        main.log.info( prefixesHost4 )
+        # generate route with next hop
+        for prefix in prefixesHost4:
+            allRoutesExpected.append( prefix + "/" + "192.168.30.1" )
+        routeIntentsExpectedHost4 = \
+            main.QuaggaCliHost4.generateExpectedOnePeerRouteIntents(
+            prefixesHost4, "192.168.30.1", "00:00:00:00:03:01",
+            SDNIPJSONFILEPATH )
+
+        main.log.info( "Generate prefixes for host5" )
+        prefixesHost5 = main.QuaggaCliHost5.generatePrefixes( 5, 10 )
+        main.log.info( prefixesHost5 )
+        for prefix in prefixesHost5:
+            allRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        routeIntentsExpectedHost5 = \
+            main.QuaggaCliHost5.generateExpectedOnePeerRouteIntents(
+            prefixesHost5, "192.168.60.1", "00:00:00:00:06:02",
+            SDNIPJSONFILEPATH )
+
+        routeIntentsExpected = routeIntentsExpectedHost3 + \
+            routeIntentsExpectedHost4 + routeIntentsExpectedHost5
+
+        cellName = main.params[ 'ENV' ][ 'cellName' ]
+        ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ]
+        main.step( "Set cell for ONOS-cli environment" )
+        main.ONOScli.setCell( cellName )
+        verifyResult = main.ONOSbench.verifyCell()
+        utilities.assert_equals(expect=main.TRUE,actual=verifyResult,onpass="Verify cell pass!",onfail="Verify cell failed...")
+
+        main.log.report( "Removing raft logs" )
+        main.ONOSbench.onosRemoveRaftLogs()
+        main.log.report( "Uninstalling ONOS" )
+        main.ONOSbench.onosUninstall( ONOS1Ip )
+
+        main.step( "Installing ONOS package" )
+        onos1InstallResult = main.ONOSbench.onosInstall(
+            options="-f", node=ONOS1Ip )
+        if onos1InstallResult is not main.TRUE:
+             main.log.report("ONOS is not installed...Aborting")
+             main.Mininet.stopNet()
+             main.cleanup()
+             main.exit()
+
+        onos1Isup = main.ONOSbench.isup( ONOS1Ip )
+        if onos1Isup is not main.TRUE:
+             main.log.report("ONOS1 didn't start!...Aborting" )
+             main.Mininet.stopNet()
+             main.ONOSbench.onosStop(ONOS1Ip);
+             main.cleanup()
+             main.exit()
+
+        main.step( "Start ONOS-cli" )
+
+        result = main.ONOScli.startOnosCli( ONOS1Ip )
+        utilities.assert_equals(expect=main.TRUE,actual=result,onpass="ONOS CLI is up!",onfail="ONOS CLI is not up...")
+        if result is not main.TRUE:
+             main.log.report("ONOS1 didn't start!...Aborting" )
+             main.Mininet.stopNet()
+             main.ONOScli.logout()
+             main.ONOSbench.onosStop(ONOS1Ip);
+             main.cleanup()
+             main.exit()
+
+
+        main.step( "Get devices in the network" )
+        listResult = main.ONOScli.devices( jsonFormat=False )
+        main.log.info( listResult )
+        time.sleep( 10 )
+        main.log.info( "Installing bgprouter feature" )
+        main.ONOScli.featureInstall( "onos-app-bgprouter" )
+        time.sleep( 10 )
+        main.step( "Login all BGP peers and add routes into peers" )
+
+        main.log.info( "Login Quagga CLI on host3" )
+        main.QuaggaCliHost3.loginQuagga( "1.168.30.2" )
+        main.log.info( "Enter configuration model of Quagga CLI on host3" )
+        main.QuaggaCliHost3.enterConfig( 64514 )
+        main.log.info( "Add routes to Quagga on host3" )
+        main.QuaggaCliHost3.addRoutes( prefixesHost3, 1 )
+
+        main.log.info( "Login Quagga CLI on host4" )
+        main.QuaggaCliHost4.loginQuagga( "1.168.30.3" )
+        main.log.info( "Enter configuration model of Quagga CLI on host4" )
+        main.QuaggaCliHost4.enterConfig( 64516 )
+        main.log.info( "Add routes to Quagga on host4" )
+        main.QuaggaCliHost4.addRoutes( prefixesHost4, 1 )
+
+        main.log.info( "Login Quagga CLI on host5" )
+        main.QuaggaCliHost5.loginQuagga( "1.168.30.5" )
+        main.log.info( "Enter configuration model of Quagga CLI on host5" )
+        main.QuaggaCliHost5.enterConfig( 64521 )
+        main.log.info( "Add routes to Quagga on host5" )
+        main.QuaggaCliHost5.addRoutes( prefixesHost5, 1 )
+
+        time.sleep( 30 )
+
+        # get routes inside SDN-IP
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+
+        # parse routes from ONOS CLI
+        allRoutesActual = \
+           main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+
+        allRoutesStrExpected = str( sorted( allRoutesExpected ) )
+        allRoutesStrActual = str( allRoutesActual ).replace( 'u', "" )
+        main.step( "Check routes installed" )
+        main.log.info( "Routes expected:" )
+        main.log.info( allRoutesStrExpected )
+        main.log.info( "Routes get from ONOS CLI:" )
+        main.log.info( allRoutesStrActual )
+        utilities.assertEquals(
+            expect=allRoutesStrExpected, actual=allRoutesStrActual,
+            onpass="***Routes in SDN-IP are correct!***",
+            onfail="***Routes in SDN-IP are wrong!***" )
+        if( eq( allRoutesStrExpected, allRoutesStrActual ) ):
+            main.log.report(
+                "***Routes in SDN-IP after adding routes are correct!***" )
+        else:
+            main.log.report(
+                "***Routes in SDN-IP after adding routes are wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllPass( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+       
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="Default connectivity check PASS",
+                                  onfail="Default connectivity check FAIL")
+
+        #============= Disconnect the BGP session between QuaggaCliHost4 and ONOS ==================
+        main.log.info( "Disabling bgp session between QuaggaCliHost4 and 192.168.30.101:" )
+        main.QuaggaCliHost4.disable_bgp_peer( "192.168.30.101", "64513" )
+        main.log.info( "Sleeping for 150 seconds for network to converge" )
+        time.sleep(150)
+        # get routes inside SDN-IP
+        main.log.info( "Getting Routes from ONOS CLI" )
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+
+        # parse routes from ONOS CLI
+        newAllRoutesActual = \
+            main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+        newAllRoutesStrActual = str( newAllRoutesActual ).replace( 'u', "" )
+
+        # Expected routes with changed next hop
+        newAllRoutesExpected = []
+        for prefix in prefixesHost3:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.20.1" )
+        for prefix in prefixesHost4:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        for prefix in prefixesHost5:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        newAllRoutesStrExpected = str( sorted( newAllRoutesExpected ) )
+        main.step( "Check routes installed after convergence-1" )
+        main.log.info( "Routes expected:" )
+        main.log.info( newAllRoutesStrExpected )
+        main.log.info( "Routes got from ONOS CLI after convergence-1:" )
+        main.log.info( newAllRoutesStrActual )
+        utilities.assertEquals(
+            expect=newAllRoutesStrExpected, actual=newAllRoutesStrActual,
+            onpass="***Routes in SDN-IP are correct after convergence!***",
+            onfail="***Routes in SDN-IP are wrong after convergence!***" )
+        if( eq( newAllRoutesStrExpected, newAllRoutesStrActual ) ):
+            main.log.report(
+                "***Routes in SDN-IP after convergence are correct!***" )
+        else:
+            main.log.report(
+                "***Routes in SDN-IP after convergence are wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllPass( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+       
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="Default connectivity check PASS",
+                                  onfail="Default connectivity check FAIL")
+
+        #============= Enabling the BGP session between QuaggaCliHost4 and ONOS ==================
+        main.log.info( "Enabling bgp session between QuaggaCliHost4 and 192.168.30.101:" )
+        main.QuaggaCliHost4.enable_bgp_peer( "192.168.30.101", "64513" )
+        main.log.info( "Sleeping for 150 seconds for network to converge" )
+        time.sleep(150)
+        # get routes inside SDN-IP
+        main.log.info( "Getting Routes from ONOS CLI" )
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+
+        # parse routes from ONOS CLI
+        newAllRoutesActual = \
+            main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+        newAllRoutesStrActual = str( newAllRoutesActual ).replace( 'u', "" )
+
+        # Expected routes with changed next hop
+        newAllRoutesExpected = []
+        for prefix in prefixesHost3:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.20.1" )
+        for prefix in prefixesHost4:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.30.1" )
+        for prefix in prefixesHost5:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        newAllRoutesStrExpected = str( sorted( newAllRoutesExpected ) )
+        main.step( "Check routes installed after convergence-2" )
+        main.log.info( "Routes expected:" )
+        main.log.info( newAllRoutesStrExpected )
+        main.log.info( "Routes got from ONOS CLI after convergence-2:" )
+        main.log.info( newAllRoutesStrActual )
+        utilities.assertEquals(
+            expect=newAllRoutesStrExpected, actual=newAllRoutesStrActual,
+            onpass="***Routes in SDN-IP are correct after convergence!***",
+            onfail="***Routes in SDN-IP are wrong after convergence!***" )
+        if( eq( newAllRoutesStrExpected, newAllRoutesStrActual ) ):
+            main.log.report(
+                "***Routes in SDN-IP after convergence are correct!***" )
+        else:
+            main.log.report(
+                "***Routes in SDN-IP after convergence are wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllPass( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+       
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="Default connectivity check PASS",
+                                  onfail="Default connectivity check FAIL")
+
+        #============================= Deleting Routes ==================
+        main.step( "Check deleting routes installed" )
+        main.QuaggaCliHost3.deleteRoutes( prefixesHost3, 1 )
+        main.QuaggaCliHost4.deleteRoutes( prefixesHost4, 1 )
+        main.QuaggaCliHost5.deleteRoutes( prefixesHost5, 1 )
+
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+        allRoutesActual = \
+            main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+
+        main.log.info( "allRoutes_actual = " )
+        main.log.info( allRoutesActual )
+
+        utilities.assertEquals(
+            expect="[]", actual=str( allRoutesActual ),
+            onpass="***Route number in SDN-IP is 0, correct!***",
+            onfail="***Routes number in SDN-IP is not 0, wrong!***" )
+
+        if( eq( allRoutesStrExpected, allRoutesStrActual ) ):
+            main.log.report( "***Routes in SDN-IP after deleting correct!***" )
+        else:
+            main.log.report( "***Routes in SDN-IP after deleting wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllFail( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="disconnect check PASS",
+                                  onfail="disconnect check FAIL")
+
+        main.ONOScli.logout()
+        main.ONOSbench.onosStop(ONOS1Ip);
+        main.Mininet.stopNet()
+        time.sleep(10)
+
+    # Route convergence and connectivity test with Route Server in VLAN tagged network
+    def CASE32( self, main):
+        import time
+        import json
+        from operator import eq
+        # from datetime import datetime
+        from time import localtime, strftime
+
+        main.case("The test case is to help to setup the TestON environment \
+            and test new drivers" )
+        TESTCASE_ROOT_PATH = main.params[ 'ENV' ][ 'home' ]
+        TESTCASE_MININET_ROOT_PATH = TESTCASE_ROOT_PATH + "/vlan/routeserver/mininet"
+        SDNIPJSONFILEPATH = TESTCASE_ROOT_PATH + "/vlan/routeserver/sdnip.json"
+        main.log.info("sdnip.json file path: "+ SDNIPJSONFILEPATH)
+        
+        # Copy the json files to config dir
+        main.ONOSbench.handle.sendline("cp " + TESTCASE_ROOT_PATH + "/vlan/routeserver/addresses.json ~/onos/tools/package/config/")
+        main.ONOSbench.handle.sendline("cp " + TESTCASE_ROOT_PATH + "/vlan/routeserver/sdnip.json ~/onos/tools/package/config/")
+
+        # Launch mininet topology for this case        
+        MININET_TOPO_FILE = TESTCASE_MININET_ROOT_PATH + "/PeeringRouteServerVlanMininet.py"
+        main.step( "Launch mininet" )
+        main.Mininet.handle.sendline("sudo python " + MININET_TOPO_FILE + " " + TESTCASE_MININET_ROOT_PATH)
+        main.step("waiting 20 secs for all switches and quagga instances to comeup")
+        time.sleep(20)
+        main.step( "Test whether Mininet is started" )
+        main.log.info( "Login Quagga CLI on host3" )
+        main.QuaggaCliHost3.loginQuagga( "1.168.30.2" )
+        # all expected routes for all BGP peers
+        allRoutesExpected = []
+        main.step( "Start to generate routes for all BGP peers" )
+        main.log.info( "Generate prefixes for host3" )
+
+        prefixesHost3 = main.QuaggaCliHost3.generatePrefixes( 3, 10 )
+        main.log.info( prefixesHost3 )
+        # generate route with next hop
+        for prefix in prefixesHost3:
+            allRoutesExpected.append( prefix + "/" + "192.168.20.1" )
+        routeIntentsExpectedHost3 = \
+            main.QuaggaCliHost3.generateExpectedOnePeerRouteIntents(
+            prefixesHost3, "192.168.20.1", "00:00:00:00:02:02",
+            SDNIPJSONFILEPATH )
+
+        main.log.info( "Generate prefixes for host4" )
+        prefixesHost4 = main.QuaggaCliHost4.generatePrefixes( 4, 10 )
+        main.log.info( prefixesHost4 )
+        # generate route with next hop
+        for prefix in prefixesHost4:
+            allRoutesExpected.append( prefix + "/" + "192.168.30.1" )
+        routeIntentsExpectedHost4 = \
+            main.QuaggaCliHost4.generateExpectedOnePeerRouteIntents(
+            prefixesHost4, "192.168.30.1", "00:00:00:00:03:01",
+            SDNIPJSONFILEPATH )
+
+        main.log.info( "Generate prefixes for host5" )
+        prefixesHost5 = main.QuaggaCliHost5.generatePrefixes( 5, 10 )
+        main.log.info( prefixesHost5 )
+        for prefix in prefixesHost5:
+            allRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        routeIntentsExpectedHost5 = \
+            main.QuaggaCliHost5.generateExpectedOnePeerRouteIntents(
+            prefixesHost5, "192.168.60.1", "00:00:00:00:06:02",
+            SDNIPJSONFILEPATH )
+
+        routeIntentsExpected = routeIntentsExpectedHost3 + \
+            routeIntentsExpectedHost4 + routeIntentsExpectedHost5
+
+        cellName = main.params[ 'ENV' ][ 'cellName' ]
+        ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ]
+        main.step( "Set cell for ONOS-cli environment" )
+        main.ONOScli.setCell( cellName )
+        verifyResult = main.ONOSbench.verifyCell()
+
+        main.log.report( "Removing raft logs" )
+        main.ONOSbench.onosRemoveRaftLogs()
+        main.log.report( "Uninstalling ONOS" )
+        main.ONOSbench.onosUninstall( ONOS1Ip )
+
+        main.step( "Installing ONOS package" )
+        onos1InstallResult = main.ONOSbench.onosInstall(
+            options="-f", node=ONOS1Ip )
+
+        onos1Isup = main.ONOSbench.isup( ONOS1Ip )
+        if not onos1Isup:
+            main.log.report( "ONOS1 didn't start!" )
+
+        main.step( "Start ONOS-cli" )
+
+        main.ONOScli.startOnosCli( ONOS1Ip )
+
+        main.step( "Get devices in the network" )
+        listResult = main.ONOScli.devices( jsonFormat=False )
+        main.log.info( listResult )
+        time.sleep( 10 )
+        main.log.info( "Installing gbprouter feature" )
+        main.ONOScli.featureInstall( "onos-app-bgprouter" )
+        time.sleep( 10 )
+        main.step( "Login all BGP peers and add routes into peers" )
+
+        main.log.info( "Login Quagga CLI on host3" )
+        main.QuaggaCliHost3.loginQuagga( "1.168.30.2" )
+        main.log.info( "Enter configuration model of Quagga CLI on host3" )
+        main.QuaggaCliHost3.enterConfig( 64514 )
+        main.log.info( "Add routes to Quagga on host3" )
+        main.QuaggaCliHost3.addRoutes( prefixesHost3, 1 )
+
+        main.log.info( "Login Quagga CLI on host4" )
+        main.QuaggaCliHost4.loginQuagga( "1.168.30.3" )
+        main.log.info( "Enter configuration model of Quagga CLI on host4" )
+        main.QuaggaCliHost4.enterConfig( 64516 )
+        main.log.info( "Add routes to Quagga on host4" )
+        main.QuaggaCliHost4.addRoutes( prefixesHost4, 1 )
+
+        main.log.info( "Login Quagga CLI on host5" )
+        main.QuaggaCliHost5.loginQuagga( "1.168.30.5" )
+        main.log.info( "Enter configuration model of Quagga CLI on host5" )
+        main.QuaggaCliHost5.enterConfig( 64521 )
+        main.log.info( "Add routes to Quagga on host5" )
+        main.QuaggaCliHost5.addRoutes( prefixesHost5, 1 )
+
+        time.sleep( 60 )
+
+        # get routes inside SDN-IP
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+
+        # parse routes from ONOS CLI
+        allRoutesActual = \
+           main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+
+        allRoutesStrExpected = str( sorted( allRoutesExpected ) )
+        allRoutesStrActual = str( allRoutesActual ).replace( 'u', "" )
+        main.step( "Check routes installed" )
+        main.log.info( "Routes expected:" )
+        main.log.info( allRoutesStrExpected )
+        main.log.info( "Routes get from ONOS CLI:" )
+        main.log.info( allRoutesStrActual )
+        utilities.assertEquals(
+            expect=allRoutesStrExpected, actual=allRoutesStrActual,
+            onpass="***Routes in SDN-IP are correct!***",
+            onfail="***Routes in SDN-IP are wrong!***" )
+        if( eq( allRoutesStrExpected, allRoutesStrActual ) ):
+            main.log.report(
+                "***Routes in SDN-IP after adding routes are correct!***" )
+        else:
+            main.log.report(
+                "***Routes in SDN-IP after adding routes are wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllPass( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+       
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="Default connectivity check PASS",
+                                  onfail="Default connectivity check FAIL")
+
+        #============= Disconnect the BGP session between QuaggaCliHost4 and ONOS ==================
+        main.log.info( "Disabling bgp session between QuaggaCliHost4 and 192.168.30.101:" )
+        main.QuaggaCliHost4.disable_bgp_peer( "192.168.30.101", "64513" )
+        main.log.info( "Sleeping for 150 seconds for network to converge" )
+        time.sleep(150)
+        # get routes inside SDN-IP
+        main.log.info( "Getting Routes from ONOS CLI" )
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+
+        # parse routes from ONOS CLI
+        newAllRoutesActual = \
+            main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+        newAllRoutesStrActual = str( newAllRoutesActual ).replace( 'u', "" )
+
+        # Expected routes with changed next hop
+        newAllRoutesExpected = []
+        for prefix in prefixesHost3:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.20.1" )
+        for prefix in prefixesHost4:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        for prefix in prefixesHost5:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        newAllRoutesStrExpected = str( sorted( newAllRoutesExpected ) )
+        main.step( "Check routes installed after convergence-1" )
+        main.log.info( "Routes expected:" )
+        main.log.info( newAllRoutesStrExpected )
+        main.log.info( "Routes got from ONOS CLI after convergence-1:" )
+        main.log.info( newAllRoutesStrActual )
+        utilities.assertEquals(
+            expect=newAllRoutesStrExpected, actual=newAllRoutesStrActual,
+            onpass="***Routes in SDN-IP are correct after convergence!***",
+            onfail="***Routes in SDN-IP are wrong after convergence!***" )
+        if( eq( newAllRoutesStrExpected, newAllRoutesStrActual ) ):
+            main.log.report(
+                "***Routes in SDN-IP after convergence are correct!***" )
+        else:
+            main.log.report(
+                "***Routes in SDN-IP after convergence are wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllPass( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+       
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="Default connectivity check PASS",
+                                  onfail="Default connectivity check FAIL")
+
+        #============= Enabling the BGP session between QuaggaCliHost4 and ONOS ==================
+        main.log.info( "Enabling bgp session between QuaggaCliHost4 and 192.168.30.101:" )
+        main.QuaggaCliHost4.enable_bgp_peer( "192.168.30.101", "64513" )
+        main.log.info( "Sleeping for 150 seconds for network to converge" )
+        time.sleep(150)
+        # get routes inside SDN-IP
+        main.log.info( "Getting Routes from ONOS CLI" )
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+
+        # parse routes from ONOS CLI
+        newAllRoutesActual = \
+            main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+        newAllRoutesStrActual = str( newAllRoutesActual ).replace( 'u', "" )
+
+        # Expected routes with changed next hop
+        newAllRoutesExpected = []
+        for prefix in prefixesHost3:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.20.1" )
+        for prefix in prefixesHost4:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.30.1" )
+        for prefix in prefixesHost5:
+            newAllRoutesExpected.append( prefix + "/" + "192.168.60.2" )
+        newAllRoutesStrExpected = str( sorted( newAllRoutesExpected ) )
+        main.step( "Check routes installed after convergence-2" )
+        main.log.info( "Routes expected:" )
+        main.log.info( newAllRoutesStrExpected )
+        main.log.info( "Routes got from ONOS CLI after convergence-2:" )
+        main.log.info( newAllRoutesStrActual )
+        utilities.assertEquals(
+            expect=newAllRoutesStrExpected, actual=newAllRoutesStrActual,
+            onpass="***Routes in SDN-IP are correct after convergence!***",
+            onfail="***Routes in SDN-IP are wrong after convergence!***" )
+        if( eq( newAllRoutesStrExpected, newAllRoutesStrActual ) ):
+            main.log.report(
+                "***Routes in SDN-IP after convergence are correct!***" )
+        else:
+            main.log.report(
+                "***Routes in SDN-IP after convergence are wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllPass( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+       
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="Default connectivity check PASS",
+                                  onfail="Default connectivity check FAIL")
+
+        #============================= Deleting Routes ==================
+        main.step( "Check deleting routes installed" )
+        main.QuaggaCliHost3.deleteRoutes( prefixesHost3, 1 )
+        main.QuaggaCliHost4.deleteRoutes( prefixesHost4, 1 )
+        main.QuaggaCliHost5.deleteRoutes( prefixesHost5, 1 )
+
+        getRoutesResult = main.ONOScli.routes( jsonFormat=True )
+        allRoutesActual = \
+            main.QuaggaCliHost3.extractActualRoutes( getRoutesResult )
+
+        main.log.info( "allRoutes_actual = " )
+        main.log.info( allRoutesActual )
+
+        utilities.assertEquals(
+            expect="[]", actual=str( allRoutesActual ),
+            onpass="***Route number in SDN-IP is 0, correct!***",
+            onfail="***Routes number in SDN-IP is not 0, wrong!***" )
+
+        if( eq( allRoutesStrExpected, allRoutesStrActual ) ):
+            main.log.report( "***Routes in SDN-IP after deleting correct!***" )
+        else:
+            main.log.report( "***Routes in SDN-IP after deleting wrong!***" )
+
+        #============================= Ping Test ========================
+        pingTestResults = main.QuaggaCliHost.pingTestAndCheckAllFail( "1.168.30.100" )
+        main.log.info("Ping test result")
+        if pingTestResults:
+            main.log.info("Test succeeded")
+        else:
+            main.log.info("Test failed")
+
+        utilities.assert_equals(expect=main.TRUE,actual=pingTestResults,
+                                  onpass="disconnect check PASS",
+                                  onfail="disconnect check FAIL")
+
+        main.ONOScli.logout()
+        main.ONOSbench.onosStop(ONOS1Ip);
+        main.Mininet.stopNet()
+        time.sleep(10)
+
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/PeeringRouterConvergenceVlanMininet.py b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/PeeringRouterConvergenceVlanMininet.py
new file mode 100755
index 0000000..983d666
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/PeeringRouterConvergenceVlanMininet.py
@@ -0,0 +1,381 @@
+#!/usr/bin/python
+
+"""
+Start up the SDN-IP demo topology
+"""
+
+"""
+AS1 = 64513, (SDN AS)
+AS2 = 64514, reachable by 192.168.10.1, 192.168.20.1
+AS3 = 64516, reachable by 192.168.30.1
+AS4 = 64517, reachable by 192.168.40.1
+AS6 = 64520, reachable by 192.168.60.2, (route server 192.168.60.1)
+"""
+
+from mininet.node import Host
+from mininet.net import Mininet
+from mininet.node import Controller, RemoteController
+from mininet.log import setLogLevel, info
+from mininet.cli import CLI
+from mininet.topo import Topo
+from mininet.util import quietRun
+from mininet.moduledeps import pathCheck
+
+import os.path
+import time
+import sys
+from subprocess import Popen, STDOUT, PIPE
+
+QUAGGA_DIR = '/usr/lib/quagga'
+#QUAGGA_DIR = '/usr/local/sbin'
+QUAGGA_RUN_DIR = '/usr/local/var/run/quagga'
+
+QUAGGA_CONFIG_FILE_DIR = '/home/tutorial1/ONLabTest/TestON/tests/PeeringRouterTest/mininet'
+
+class VLANHost( Host ):
+    "Host connected to VLAN interface"
+
+    def config( self, vlan=10, intf2 = '', ip2 = 0, vlan2 = 0, **params):
+        """Configure VLANHost according to (optional) parameters:
+           vlan: VLAN ID for default interface"""
+
+        r = super( VLANHost, self ).config( **params )
+
+        intf = params['inf']
+        # remove IP from default, "physical" interface
+        self.cmd( 'ifconfig %s inet 0' % intf )
+        # create VLAN interface
+        self.cmd( 'vconfig add %s %d' % ( intf, vlan ) )
+        # assign the host's IP to the VLAN interface
+        self.cmd( 'ifconfig %s.%d inet %s' % ( intf, vlan, params['ip'] ) )
+        # update the intf name and host's intf map
+        newName = '%s.%d' % ( intf, vlan )
+        # update the (Mininet) interface to refer to VLAN interface name
+        defaultIntf = self.defaultIntf()
+        defaultIntf.name = newName
+        # add VLAN interface to host's name to intf map
+        self.nameToIntf[ newName ] = defaultIntf
+
+        return r
+
+class SDNIpModifiedTopo( Topo ):
+    "SDN Ip Modified Topology"
+    
+    def __init__( self, *args, **kwargs ):
+        global numHost101 
+        global numHost200
+        numHost101 = 101
+        numHost200 = 200
+        Topo.__init__( self, *args, **kwargs )
+        sw1 = self.addSwitch('sw1', dpid='0000000000000001')
+        sw2 = self.addSwitch('sw2', dpid='0000000000000002')
+        #add a switch for 3 quagga hosts
+        swTestOn = self.addSwitch('swTestOn', dpid='0000000000000102')
+        #Note this switch isn't part of the SDN topology
+        #We'll use the ovs-controller to turn this into a learning switch
+        as6sw = self.addSwitch('as6sw', dpid='00000000000000a7')
+
+        host1 = self.addHost( 'host1' )
+        root1 = self.addHost( 'root1', inNamespace=False , ip='0')
+        rootTestOn = self.addHost( 'rootTestOn', inNamespace=False, ip='0' )
+
+        #AS2 host
+        host3 = self.addHost( 'host3', cls=VLANHost, vlan=10, inf="host3-eth0", ip="192.168.10.1")
+        
+        as2host = self.addHost( 'as2host' )
+        #AS3 host
+        host4 = self.addHost( 'host4', cls=VLANHost, vlan=30, inf="host4-eth0", ip="192.168.30.1" )
+        as3host = self.addHost( 'as3host' )
+        #AS6 host
+        host5 = self.addHost( 'host5', cls=VLANHost, vlan=60, inf="host5-eth0", ip="192.168.60.2" )
+        as6host = self.addHost( 'as6host' )
+
+        self.addLink( host1, sw2 )
+        #Links to the multihomed AS
+        self.addLink( host3, sw1 )
+        self.addLink( host3, sw1 )
+        self.addLink( as2host, host3 )
+        #Single links to the remaining two ASes
+        self.addLink( host4, sw1 )
+        self.addLink( as3host, host4 )
+          
+        #AS3-AS4 link
+        #self.addLink( host4, host5)
+        #Add new AS6 to its bridge
+        self.addLink( host5, as6sw )
+        self.addLink( as6host, host5 )
+        #Backup link from router5 to router4
+        self.addLink( host4, host5)
+        #test the host behind the router(behind the router server)
+#        for i in range(1, 10):
+ #           host = self.addHost('as6host%d' % i)
+  #          self.addLink(host, as6router)
+
+        ## Internal Connection To Hosts ##
+        self.addLink( root1, host1 )
+
+ #       self.addLink( sw1, sw2 )
+ #       self.addLink( sw1, sw3 )
+ #       self.addLink( sw2, sw4 )
+ #       self.addLink( sw3, sw4 )
+ #       self.addLink( sw3, sw5 )
+ #       self.addLink( sw4, sw6 )
+ #       self.addLink( sw5, sw6 )
+        self.addLink( as6sw, sw1 )
+        
+        
+        self.addLink(swTestOn, rootTestOn)
+        #self.addLink(swTestOn, host1)
+        self.addLink(swTestOn, host3)
+        self.addLink(swTestOn, host4)
+        self.addLink(swTestOn, host5)
+        self.addLink(swTestOn, as2host)
+        
+        
+        #self.addLink(rootTestOn, host4)
+
+def startsshd( host ):
+    "Start sshd on host"
+    info( '*** Starting sshd\n' )
+    name, intf, ip = host.name, host.defaultIntf(), host.IP()
+    banner = '/tmp/%s.banner' % name
+    host.cmd( 'echo "Welcome to %s at %s" >  %s' % ( name, ip, banner ) )
+    host.cmd( '/usr/sbin/sshd -o "Banner %s"' % banner, '-o "UseDNS no"' )
+    info( '***', host.name, 'is running sshd on', intf, 'at', ip, '\n' )
+
+def startsshds ( hosts ):
+    for h in hosts:
+        startsshd( h )
+
+def stopsshd( ):
+    "Stop *all* sshd processes with a custom banner"
+    info( '*** Shutting down stale sshd/Banner processes ',
+          quietRun( "pkill -9 -f Banner" ), '\n' )
+
+def startquagga( host, num, config_file ):
+    info( '*** Starting Quagga on %s\n' % host )
+    zebra_cmd = 'sudo %s/zebra -d -f  %s/zebra.conf -z %s/zserv%s.api -i %s/zebra%s.pid' % (QUAGGA_DIR, QUAGGA_CONFIG_FILE_DIR, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+    quagga_cmd = 'sudo %s/bgpd -d -f %s -z %s/zserv%s.api -i %s/bgpd%s.pid' % (QUAGGA_DIR, config_file, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+    
+    print zebra_cmd
+    print quagga_cmd
+
+    host.cmd( zebra_cmd )
+    host.cmd( quagga_cmd )
+    
+def startquaggahost5( host, num ):
+    info( '*** Starting Quagga on %s\n' % host )
+    zebra_cmd = 'sudo %s/zebra -d -f %s/zebra.conf -z %s/zserv%s.api -i %s/zebra%s.pid' % (QUAGGA_DIR, QUAGGA_CONFIG_FILE_DIR, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+    quagga_cmd = 'sudo %s/bgpd -d -f ./as4quaggas/quagga%s.conf -z %s/zserv%s.api -i %s/bgpd%s.pid' % (QUAGGA_DIR, num, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+   
+    host.cmd( zebra_cmd )
+    host.cmd( quagga_cmd )    
+    
+
+def stopquagga( ):
+    quietRun( 'sudo pkill -9 -f bgpd' )
+    quietRun( 'sudo pkill -9 -f zebra' )
+
+def sdn1net():
+    topo = SDNIpModifiedTopo()
+    info( '*** Creating network\n' )
+    net = Mininet( topo=topo, controller=RemoteController )
+    net = Mininet( topo=topo, controller=RemoteController )
+
+    host1, host3, host4, host5 = net.get( 'host1', 'host3', 'host4', 'host5' )
+    
+        #host100.setIP('1.168.30.' + str(i), 24, str(host100) + "-eth2")  
+         
+        #host500.setMAC('00:00:00:00:04:%d' % (i-101), 'host%d-eth0' %(i))
+        #add IP prefixes
+        #for j in range(0,121):
+            #host100.cmd('sudo ip addr add %s.0.40.%s/24 dev host%s-eth0' %(i,j,i))
+
+    ## Adding 2nd, 3rd and 4th interface to host1 connected to sw1 (for another BGP peering)
+    #sw1 = net.get('sw1')
+    host1.setMAC('00:00:00:00:00:01', 'host1-eth0')
+    #host1.cmd('ip addr add 192.168.20.101/24 dev host1-eth0')
+    #host1.cmd('ip addr add 192.168.30.101/24 dev host1-eth0')
+    #host1.cmd('ip addr add 192.168.60.101/24 dev host1-eth0')
+
+    # Net has to be start after adding the above link
+    net.start()
+
+    # Set up as6sw as a learning switch as quickly as possible so it 
+    # hopefully doesn't connect to the actual controller
+    # TODO figure out how to change controller before starting switch
+    as6sw = net.get('as6sw')
+    as6sw.cmd('ovs-vsctl set-controller as6sw none')
+    as6sw.cmd('ovs-vsctl set-fail-mode as6sw standalone')
+    
+    as6sw.cmd( 'sudo ovs-vsctl set port as6sw-eth1 trunk=60')
+    as6sw.cmd( 'sudo ovs-vsctl set port as6sw-eth2 trunk=60')
+
+
+    sw1 = net.get('sw1')
+    sw1.cmd('ovs-vsctl set-controller sw1 tcp:127.0.0.1:6633')
+    
+    swTestOn = net.get('swTestOn')
+    swTestOn.cmd('ovs-vsctl set-controller swTestOn none')
+    swTestOn.cmd('ovs-vsctl set-fail-mode swTestOn standalone')
+
+    #host1.defaultIntf().setIP('192.168.10.101/24') 
+    
+    host1.cmd( 'ifconfig host1-eth0 inet 0')
+    host1.cmd( 'vconfig add host1-eth0 10')
+    host1.cmd( 'ifconfig host1-eth0.10 inet 192.168.10.101')
+    
+    host1.cmd( 'vconfig add host1-eth0 20')
+    host1.cmd( 'ifconfig host1-eth0.20 inet 192.168.20.101')
+    
+    host1.cmd( 'vconfig add host1-eth0 30')
+    host1.cmd( 'ifconfig host1-eth0.30 inet 192.168.30.101')
+    
+    host1.cmd( 'vconfig add host1-eth0 60')
+    host1.cmd( 'ifconfig host1-eth0.60 inet 192.168.60.101')
+
+    # Run BGPd
+    #host1.cmd('%s -d -f %s' % (BGPD, BGPD_CONF))
+    #host1.cmd('/sbin/route add default gw 192.168.10.254 dev %s-eth0' % (host1.name))
+    
+    # Configure new host interfaces
+    #host2.defaultIntf().setIP('172.16.10.2/24')
+    #host2.defaultIntf().setMAC('00:00:00:00:01:02') 
+    #host2.cmd('/sbin/route add default gw 172.16.10.254 dev %s-eth0' % (host2.name))
+
+    # Set up AS2
+    # add additional VLAN interface
+    host3.cmd( 'ifconfig host3-eth1 inet 0')
+    host3.cmd( 'vconfig add host3-eth1 20')
+    host3.cmd( 'ifconfig host3-eth1.20 inet 192.168.20.1')
+    # change the interface for the sencond connection to sw1 to vlan interface
+    newName = "host3-eth1.20"
+    secondIntf = host3.intf("host3-eth1")
+    secondIntf.name = newName
+    host3.nameToIntf[ newName ] = secondIntf
+    
+    host3.setMAC('00:00:00:00:02:01', 'host3-eth0.10')
+    host3.setMAC('00:00:00:00:02:02', 'host3-eth1.20')
+    
+    #host3.setIP('172.16.20.254', 24, 'host3-eth2')
+    host3.setIP('3.0.0.254', 8, 'host3-eth2')
+    host3.cmd('sysctl net.ipv4.conf.all.forwarding=1')
+    
+    host3.setIP('1.168.30.2', 24, 'host3-eth3')   
+    host3.cmd('sysctl net.ipv4.conf.all.arp_ignore=1')
+    host3.cmd('sysctl net.ipv4.conf.all.arp_announce=1')
+    as2host = net.get('as2host')
+    #as2host.defaultIntf().setIP('172.16.20.1/24')
+    for i in range(0, 20):
+        as2host.cmd('sudo ip addr add 3.0.%d.1/24 dev as2host-eth0' %i)
+    as2host.setIP('1.168.30.100', 24, 'as2host-eth1')
+    
+    as2host.cmd('ip route add default via 3.0.0.254')
+    
+    # Set up AS3
+    host4.setMAC('00:00:00:00:03:01', 'host4-eth0.30')
+    host4.setIP('4.0.0.254', 8, 'host4-eth1')
+    host4.setMAC('00:00:00:00:03:99', 'host4-eth1')
+    host4.cmd('sysctl net.ipv4.conf.all.forwarding=1')
+    as3host = net.get('as3host')
+    for i in range(0, 20):
+        as3host.cmd('sudo ip addr add 4.0.%d.1/24 dev as3host-eth0' %i)
+    as3host.cmd('ip route add default via 4.0.0.254')
+    
+    host4.setIP('10.0.0.4', 24, 'host4-eth2')
+    host4.setMAC('00:00:00:00:03:33', 'host4-eth2')
+    
+    #root space
+    host4.setIP('1.168.30.3', 24, 'host4-eth3')
+    host4.setMAC('00:00:00:00:03:03', 'host4-eth3')
+    
+    # Set up AS4
+    #as4host = net.get('as4host')
+    #as4host.defaultIntf().setIP('172.16.40.1/24')
+    #as4host.cmd('ip route add default via 172.16.40.254')
+    
+    # setup interface address for 100 quagga hosts
+    time.sleep(10)
+    #for i in range(numHost101, numHost200 + 1):
+        #host100 = net.get('host' + str(i))
+        #host100.cmd(str(i)+'.0.1.254', 24, 'host'+str(i)+'-eth1')
+        #as4host100 = net.get('as4host%s' %(i))
+        #as4host100.defaultIntf().setIP(str(i) + '.0.0.1/24')
+        #as4host100.cmd('ip route add default via ' + str(i) + '.0.0.254')
+        #for j in range(0, 100):
+            #as4host100.cmd('sudo ip addr add %d.0.%d.1/24 dev %s-eth0' %(i, j, as4host100))
+
+    # Set up AS6 - This has a router and a route server
+    host5 = net.get('host5')
+    host5.setMAC('00:00:00:00:06:02', 'host5-eth0.60')
+    #as6router.setIP('172.16.60.254', 24, 'as6router-eth1')
+    host5.setIP('5.0.0.254', 8, 'host5-eth1')
+    host5.cmd('sysctl net.ipv4.conf.all.forwarding=1')
+    host5.setIP('10.0.0.5', 24, 'host5-eth2')
+    host5.setMAC('00:00:00:00:06:66', 'host5-eth2')
+    host5.setIP('1.168.30.5', 24, 'host5-eth3')
+    host5.setMAC('00:00:00:00:06:05', 'host5-eth3')
+
+    as6host = net.get('as6host')
+    #as6host.defaultIntf().setIP('5.0.0.1/24')
+    for i in range(0, 10):
+        as6host.cmd('sudo ip addr add 5.0.%d.1/24 dev as6host-eth0' %i)
+    as6host.cmd('ip route add default via 5.0.0.254')
+
+    # test the host in the as6
+    #for i in range(1, 10):
+    #    baseip = (i-1)*4
+    #    host = net.get('as6host%d' % i)
+    #    host.defaultIntf().setIP('172.16.70.%d/24' % (baseip+1))
+    #    host.cmd('ip route add default via 172.16.70.%d' % (baseip+2))
+     #   as6router.setIP('172.16.70.%d' % (baseip+2), 30, 'as6router-eth%d' % (i+1))
+
+    # Start Quagga on border routers
+    startquagga(host3, 1, QUAGGA_CONFIG_FILE_DIR + '/quagga1.conf')
+    startquagga(host4, 2, QUAGGA_CONFIG_FILE_DIR + '/quagga2.conf')
+    #for i in range(numHost101, numHost200 + 1):
+        #host100=net.get('host%d' % (i))
+        #startquaggahost5(host100, i)
+
+    #startquagga(as6rs, 4, 'quagga-as6-rs.conf')
+    startquagga(host5, 5, QUAGGA_CONFIG_FILE_DIR + '/quagga-as6.conf')
+
+    #root1, root2, rootTestOn  = net.get( 'root1', 'root2', 'rootTestOn' )
+    root1, rootTestOn  = net.get( 'root1', 'rootTestOn' )
+    host1.intf('host1-eth1').setIP('1.1.1.1/24')
+    root1.intf('root1-eth0').setIP('1.1.1.2/24')
+    #host2.intf('host2-eth1').setIP('1.1.2.1/24')
+    #root2.intf('root2-eth0').setIP('1.1.2.2/24')
+    
+    #rootTestOn.cmd('ip addr add 1.168.30.102/24 dev rootTestOn-eth0')
+    rootTestOn.cmd('ip addr add 1.168.30.99/24 dev rootTestOn-eth0')
+    
+    stopsshd()    
+
+    startquagga(host1, 100, QUAGGA_CONFIG_FILE_DIR + '/quagga-sdn-modified.conf')    
+    hosts = [ host1, host3, host4, host5, as2host ];
+    #sshdHosts = sshdHosts + hosts
+    startsshds( hosts )
+    #
+    onos1 = '127.0.0.1'
+    forwarding1 = '%s:2000:%s:2000' % ('1.1.1.2', onos1)
+    root1.cmd( 'ssh -nNT -o "PasswordAuthentication no" -o "StrictHostKeyChecking no" -l sdn -L %s %s & ' % (forwarding1, onos1) )
+
+    # Forward 2605 to root namespace for easier access to SDN domain BGPd
+    # If root can ssh to itself without a password this should work
+    root1.cmd('ssh -N -o "PasswordAuthentication no" -o "StrictHostKeyChecking no" -L 2605:1.1.1.1:2605 1.1.1.1 &')
+    #time.sleep(3000000000)
+    CLI( net )
+
+    # Close the ssh port forwarding
+    #quietRun('sudo pkill -f 1.1.1.1')
+
+    stopsshd()
+    stopquagga()
+    net.stop()
+
+if __name__ == '__main__':
+    setLogLevel( 'debug' )
+    if len(sys.argv) > 1:
+        QUAGGA_CONFIG_FILE_DIR = sys.argv[1]
+    sdn1net()
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga-as6.conf b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga-as6.conf
new file mode 100644
index 0000000..5e7028d
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga-as6.conf
@@ -0,0 +1,39 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64521
+  bgp router-id 192.168.60.2
+  neighbor 192.168.60.101 remote-as 64513
+  neighbor 10.0.0.4 remote-as 64516
+! neighbor 192.168.60.3 remote-as 64520
+!  network 172.16.60.0/24
+!  network 172.16.70.4/30
+ ! network 172.16.70.8/30
+ ! network 172.16.70.12/30
+ ! network 172.16.70.16/30
+ ! network 172.16.70.20/30
+ ! network 172.16.70.24/30
+ ! network 172.16.70.28/30
+ ! network 172.16.70.32/30
+! neighbor 10.0.0.2 route-map set-nexthop out
+! neighbor 10.0.0.2 ebgp-multihop
+! neighbor 10.0.0.2 next-hop-self
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga-sdn-modified.conf b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga-sdn-modified.conf
new file mode 100644
index 0000000..d334c2a
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga-sdn-modified.conf
@@ -0,0 +1,49 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+route-map AS65000 permit 1
+  set as-path prepend 65000
+!
+router bgp 64513
+  bgp router-id 192.168.10.101
+  timers bgp 1 3
+  !timers bgp 3 9 
+  neighbor 192.168.10.1 remote-as 64514
+  neighbor 192.168.10.1 ebgp-multihop
+  neighbor 192.168.10.1 timers connect 5
+  neighbor 192.168.20.1 remote-as 64514
+  neighbor 192.168.20.1 ebgp-multihop
+  neighbor 192.168.20.1 timers connect 5
+  neighbor 192.168.20.1 route-map AS65000 in
+  neighbor 192.168.30.1 remote-as 64516
+  neighbor 192.168.30.1 ebgp-multihop
+  neighbor 192.168.30.1 timers connect 5
+  neighbor 192.168.60.2 remote-as 64521
+  neighbor 192.168.60.2 ebgp-multihop
+  neighbor 192.168.60.2 timers connect 5
+  neighbor 1.1.1.2 remote-as 64513
+  neighbor 1.1.1.2 port 2000
+  neighbor 1.1.1.2 timers connect 5
+
+
+
+  network 172.16.10.0/24
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga1.conf b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga1.conf
new file mode 100644
index 0000000..264f85e
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga1.conf
@@ -0,0 +1,32 @@
+!
+! Zebra configuration saved from vty
+!   2014/11/25 11:22:24
+!
+hostname bgpd
+password hello
+log stdout
+!
+router bgp 64514
+ bgp router-id 192.168.10.1
+! network 3.0.0.0/24
+! network 3.0.1.0/24
+! network 3.0.2.0/24
+! network 3.0.3.0/24
+! network 3.0.4.0/24
+! network 3.0.5.0/24
+! network 3.0.6.0/24
+! network 3.0.7.0/24
+! network 3.0.8.0/24
+! network 3.0.9.0/24
+ neighbor 192.168.20.101 remote-as 64513
+ neighbor 192.168.20.101 route-map PREPEND2 in
+ neighbor 192.168.20.101 route-map PREPEND2 out
+!
+route-map PREPEND1 permit 1
+ set as-path prepend 64514
+!
+route-map PREPEND2 permit 2
+ set as-path prepend 64514 64514
+!
+line vty
+!
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga2.conf b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga2.conf
new file mode 100644
index 0000000..14c7d67
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/quagga2.conf
@@ -0,0 +1,32 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64516
+  bgp router-id 192.168.30.1
+!  timers bgp 1 3
+  neighbor 192.168.30.101 remote-as 64513
+  neighbor 10.0.0.5 remote-as 64521
+! neighbor 192.168.50.2   remote-as 65001
+! network 172.16.30.0/24
+! neighbor 10.0.0.2 route-map set-nexthop out
+! neighbor 10.0.0.2 ebgp-multihop
+! neighbor 10.0.0.2 next-hop-self
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/zebra.conf b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/zebra.conf
new file mode 100644
index 0000000..0f8e3a2
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeconvergence/mininet/zebra.conf
@@ -0,0 +1,26 @@
+! -*- zebra -*-
+!
+! zebra sample configuration file
+!
+! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
+!
+hostname zebra 
+password hello
+enable password 0fw0rk
+log stdout
+!
+! Interfaces description.
+!
+!interface lo
+! description test of desc.
+!
+!interface sit0
+! multicast
+
+!
+! Static default route sample.
+!
+!ip route 0.0.0.0/0 203.181.89.241
+!
+
+!log file /usr/local/var/log/quagga/zebra.log
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/addresses.json b/TestON/tests/PeeringRouterTest/vlan/routeserver/addresses.json
new file mode 100644
index 0000000..f800c1f
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/addresses.json
@@ -0,0 +1,33 @@
+{
+    "addresses" : [
+		{
+		    "dpid" : "00:00:00:00:00:00:00:01",
+		    "port" : "1",
+		    "ips" : ["192.168.10.101/24"],
+                    "mac" : "00:00:00:00:00:01",
+		    "vlan" : "10"	
+		},
+		{
+		    "dpid" : "00:00:00:00:00:00:00:01",
+		    "port" : "2",
+		    "ips" : ["192.168.20.101/24"],
+		    "mac" : "00:00:00:00:00:01",
+		    "vlan" : "20"	
+		},
+		{
+		    "dpid" : "00:00:00:00:00:00:00:01",
+		    "port" : "3",
+		    "ips" : ["192.168.30.101/24"],
+		    "mac" : "00:00:00:00:00:01",
+		    "vlan" : "30"	
+		},
+		{
+		    "dpid" : "00:00:00:00:00:00:00:01",
+		    "port" : "4",
+		    "ips" : ["192.168.60.101/24"],
+		    "mac" : "00:00:00:00:00:01",
+		    "vlan" : "60"	
+		}
+
+    ]
+}
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/PeeringRouteServerVlanMininet.py b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/PeeringRouteServerVlanMininet.py
new file mode 100755
index 0000000..3ba30cd
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/PeeringRouteServerVlanMininet.py
@@ -0,0 +1,389 @@
+#!/usr/bin/python
+
+"""
+Start up the SDN-IP demo topology
+"""
+
+"""
+AS1 = 64513, (SDN AS)
+AS2 = 64514, reachable by 192.168.10.1, 192.168.20.1
+AS3 = 64516, reachable by 192.168.30.1
+AS4 = 64517, reachable by 192.168.40.1
+AS6 = 64520, reachable by 192.168.60.2, (route server 192.168.60.1)
+"""
+
+from mininet.node import Host
+from mininet.net import Mininet
+from mininet.node import Controller, RemoteController
+from mininet.log import setLogLevel, info
+from mininet.cli import CLI
+from mininet.topo import Topo
+from mininet.util import quietRun
+from mininet.moduledeps import pathCheck
+
+import os.path
+import time
+import sys
+from subprocess import Popen, STDOUT, PIPE
+
+QUAGGA_DIR = '/usr/lib/quagga'
+#QUAGGA_DIR = '/usr/local/sbin'
+QUAGGA_RUN_DIR = '/usr/local/var/run/quagga'
+
+QUAGGA_CONFIG_FILE_DIR = '/home/tutorial1/ONLabTest/TestON/tests/PeeringRouterTest/mininet'
+
+class VLANHost( Host ):
+    "Host connected to VLAN interface"
+
+    def config( self, vlan=10, intf2 = '', ip2 = 0, vlan2 = 0, **params):
+        """Configure VLANHost according to (optional) parameters:
+           vlan: VLAN ID for default interface"""
+
+        r = super( VLANHost, self ).config( **params )
+
+        intf = params['inf']
+        # remove IP from default, "physical" interface
+        self.cmd( 'ifconfig %s inet 0' % intf )
+        # create VLAN interface
+        self.cmd( 'vconfig add %s %d' % ( intf, vlan ) )
+        # assign the host's IP to the VLAN interface
+        self.cmd( 'ifconfig %s.%d inet %s' % ( intf, vlan, params['ip'] ) )
+        # update the intf name and host's intf map
+        newName = '%s.%d' % ( intf, vlan )
+        # update the (Mininet) interface to refer to VLAN interface name
+        defaultIntf = self.defaultIntf()
+        defaultIntf.name = newName
+        # add VLAN interface to host's name to intf map
+        self.nameToIntf[ newName ] = defaultIntf
+
+        return r
+
+class SDNIpModifiedTopo( Topo ):
+    "SDN Ip Modified Topology"
+    
+    def __init__( self, *args, **kwargs ):
+        global numHost101 
+        global numHost200
+        numHost101 = 101
+        numHost200 = 200
+        Topo.__init__( self, *args, **kwargs )
+        sw1 = self.addSwitch('sw1', dpid='0000000000000001')
+        sw2 = self.addSwitch('sw2', dpid='0000000000000002')
+        #add a switch for 3 quagga hosts
+        swTestOn = self.addSwitch('swTestOn', dpid='0000000000000102')
+        #Note this switch isn't part of the SDN topology
+        #We'll use the ovs-controller to turn this into a learning switch
+        as6sw = self.addSwitch('as6sw', dpid='00000000000000a7')
+
+        host1 = self.addHost( 'host1' )
+        root1 = self.addHost( 'root1', inNamespace=False , ip='0')
+        rootTestOn = self.addHost( 'rootTestOn', inNamespace=False, ip='0' )
+
+        #AS2 host
+        host3 = self.addHost( 'host3', cls=VLANHost, vlan=10, inf="host3-eth0", ip="192.168.10.1")
+        
+        as2host = self.addHost( 'as2host' )
+        #AS3 host
+        host4 = self.addHost( 'host4', cls=VLANHost, vlan=30, inf="host4-eth0", ip="192.168.30.1" )
+        as3host = self.addHost( 'as3host' )
+        #AS6 host
+        as6rs = self.addHost( 'as6rs', cls=VLANHost, vlan=60, inf="as6rs-eth0", ip="192.168.60.1" )
+        host5 = self.addHost( 'host5', cls=VLANHost, vlan=60, inf="host5-eth0", ip="192.168.60.2" )
+        as6host = self.addHost( 'as6host' )
+
+        self.addLink( host1, sw2 )
+        #Links to the multihomed AS
+        self.addLink( host3, sw1 )
+        self.addLink( host3, sw1 )
+        self.addLink( as2host, host3 )
+        #Single links to the remaining two ASes
+        self.addLink( host4, sw1 )
+        self.addLink( as3host, host4 )
+          
+        #AS3-AS4 link
+        #self.addLink( host4, host5)
+        #Add new AS6 to its bridge
+        self.addLink( as6rs, as6sw )
+        self.addLink( host5, as6sw )
+        self.addLink( as6host, host5 )
+        #Backup link from router5 to router4
+        self.addLink( host4, host5)
+        #test the host behind the router(behind the router server)
+#        for i in range(1, 10):
+ #           host = self.addHost('as6host%d' % i)
+  #          self.addLink(host, as6router)
+
+        ## Internal Connection To Hosts ##
+        self.addLink( root1, host1 )
+
+ #       self.addLink( sw1, sw2 )
+ #       self.addLink( sw1, sw3 )
+ #       self.addLink( sw2, sw4 )
+ #       self.addLink( sw3, sw4 )
+ #       self.addLink( sw3, sw5 )
+ #       self.addLink( sw4, sw6 )
+ #       self.addLink( sw5, sw6 )
+        self.addLink( as6sw, sw1 )
+        
+        
+        self.addLink(swTestOn, rootTestOn)
+        #self.addLink(swTestOn, host1)
+        self.addLink(swTestOn, host3)
+        self.addLink(swTestOn, host4)
+        self.addLink(swTestOn, host5)
+        self.addLink(swTestOn, as2host)
+        self.addLink(swTestOn, as6rs)
+        
+        
+        #self.addLink(rootTestOn, host4)
+
+def startsshd( host ):
+    "Start sshd on host"
+    info( '*** Starting sshd\n' )
+    name, intf, ip = host.name, host.defaultIntf(), host.IP()
+    banner = '/tmp/%s.banner' % name
+    host.cmd( 'echo "Welcome to %s at %s" >  %s' % ( name, ip, banner ) )
+    host.cmd( '/usr/sbin/sshd -o "Banner %s"' % banner, '-o "UseDNS no"' )
+    info( '***', host.name, 'is running sshd on', intf, 'at', ip, '\n' )
+
+def startsshds ( hosts ):
+    for h in hosts:
+        startsshd( h )
+
+def stopsshd( ):
+    "Stop *all* sshd processes with a custom banner"
+    info( '*** Shutting down stale sshd/Banner processes ',
+          quietRun( "pkill -9 -f Banner" ), '\n' )
+
+def startquagga( host, num, config_file ):
+    info( '*** Starting Quagga on %s\n' % host )
+    zebra_cmd = 'sudo %s/zebra -d -f  %s/zebra.conf -z %s/zserv%s.api -i %s/zebra%s.pid' % (QUAGGA_DIR, QUAGGA_CONFIG_FILE_DIR, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+    quagga_cmd = 'sudo %s/bgpd -d -f %s -z %s/zserv%s.api -i %s/bgpd%s.pid' % (QUAGGA_DIR, config_file, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+    
+    print zebra_cmd
+    print quagga_cmd
+
+    host.cmd( zebra_cmd )
+    host.cmd( quagga_cmd )
+    
+def startquaggahost5( host, num ):
+    info( '*** Starting Quagga on %s\n' % host )
+    zebra_cmd = 'sudo %s/zebra -d -f %s/zebra.conf -z %s/zserv%s.api -i %s/zebra%s.pid' % (QUAGGA_DIR, QUAGGA_CONFIG_FILE_DIR, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+    quagga_cmd = 'sudo %s/bgpd -d -f ./as4quaggas/quagga%s.conf -z %s/zserv%s.api -i %s/bgpd%s.pid' % (QUAGGA_DIR, num, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num)
+   
+    host.cmd( zebra_cmd )
+    host.cmd( quagga_cmd )    
+    
+
+def stopquagga( ):
+    quietRun( 'sudo pkill -9 -f bgpd' )
+    quietRun( 'sudo pkill -9 -f zebra' )
+
+def sdn1net():
+    topo = SDNIpModifiedTopo()
+    info( '*** Creating network\n' )
+    net = Mininet( topo=topo, controller=RemoteController )
+    net = Mininet( topo=topo, controller=RemoteController )
+
+    host1, host3, host4, host5 = net.get( 'host1', 'host3', 'host4', 'host5' )
+    
+        #host100.setIP('1.168.30.' + str(i), 24, str(host100) + "-eth2")  
+         
+        #host500.setMAC('00:00:00:00:04:%d' % (i-101), 'host%d-eth0' %(i))
+        #add IP prefixes
+        #for j in range(0,121):
+            #host100.cmd('sudo ip addr add %s.0.40.%s/24 dev host%s-eth0' %(i,j,i))
+
+    ## Adding 2nd, 3rd and 4th interface to host1 connected to sw1 (for another BGP peering)
+    #sw1 = net.get('sw1')
+    host1.setMAC('00:00:00:00:00:01', 'host1-eth0')
+    #host1.cmd('ip addr add 192.168.20.101/24 dev host1-eth0')
+    #host1.cmd('ip addr add 192.168.30.101/24 dev host1-eth0')
+    #host1.cmd('ip addr add 192.168.60.101/24 dev host1-eth0')
+
+    # Net has to be start after adding the above link
+    net.start()
+
+    # Set up as6sw as a learning switch as quickly as possible so it 
+    # hopefully doesn't connect to the actual controller
+    # TODO figure out how to change controller before starting switch
+    as6sw = net.get('as6sw')
+    as6sw.cmd('ovs-vsctl set-controller as6sw none')
+    as6sw.cmd('ovs-vsctl set-fail-mode as6sw standalone')
+    
+    as6sw.cmd( 'sudo ovs-vsctl set port as6sw-eth1 trunk=60')
+    as6sw.cmd( 'sudo ovs-vsctl set port as6sw-eth2 trunk=60')
+
+
+    sw1 = net.get('sw1')
+    sw1.cmd('ovs-vsctl set-controller sw1 tcp:127.0.0.1:6633')
+    
+    swTestOn = net.get('swTestOn')
+    swTestOn.cmd('ovs-vsctl set-controller swTestOn none')
+    swTestOn.cmd('ovs-vsctl set-fail-mode swTestOn standalone')
+
+    #host1.defaultIntf().setIP('192.168.10.101/24') 
+    
+    host1.cmd( 'ifconfig host1-eth0 inet 0')
+    host1.cmd( 'vconfig add host1-eth0 10')
+    host1.cmd( 'ifconfig host1-eth0.10 inet 192.168.10.101')
+    
+    host1.cmd( 'vconfig add host1-eth0 20')
+    host1.cmd( 'ifconfig host1-eth0.20 inet 192.168.20.101')
+    
+    host1.cmd( 'vconfig add host1-eth0 30')
+    host1.cmd( 'ifconfig host1-eth0.30 inet 192.168.30.101')
+    
+    host1.cmd( 'vconfig add host1-eth0 60')
+    host1.cmd( 'ifconfig host1-eth0.60 inet 192.168.60.101')
+
+    # Run BGPd
+    #host1.cmd('%s -d -f %s' % (BGPD, BGPD_CONF))
+    #host1.cmd('/sbin/route add default gw 192.168.10.254 dev %s-eth0' % (host1.name))
+    
+    # Configure new host interfaces
+    #host2.defaultIntf().setIP('172.16.10.2/24')
+    #host2.defaultIntf().setMAC('00:00:00:00:01:02') 
+    #host2.cmd('/sbin/route add default gw 172.16.10.254 dev %s-eth0' % (host2.name))
+
+    # Set up AS2
+    # add additional VLAN interface
+    host3.cmd( 'ifconfig host3-eth1 inet 0')
+    host3.cmd( 'vconfig add host3-eth1 20')
+    host3.cmd( 'ifconfig host3-eth1.20 inet 192.168.20.1')
+    # change the interface for the sencond connection to sw1 to vlan interface
+    newName = "host3-eth1.20"
+    secondIntf = host3.intf("host3-eth1")
+    secondIntf.name = newName
+    host3.nameToIntf[ newName ] = secondIntf
+    
+    host3.setMAC('00:00:00:00:02:01', 'host3-eth0.10')
+    host3.setMAC('00:00:00:00:02:02', 'host3-eth1.20')
+    
+    #host3.setIP('172.16.20.254', 24, 'host3-eth2')
+    host3.setIP('3.0.0.254', 8, 'host3-eth2')
+    host3.cmd('sysctl net.ipv4.conf.all.forwarding=1')
+    
+    host3.setIP('1.168.30.2', 24, 'host3-eth3')   
+    host3.cmd('sysctl net.ipv4.conf.all.arp_ignore=1')
+    host3.cmd('sysctl net.ipv4.conf.all.arp_announce=1')
+    as2host = net.get('as2host')
+    #as2host.defaultIntf().setIP('172.16.20.1/24')
+    for i in range(0, 20):
+        as2host.cmd('sudo ip addr add 3.0.%d.1/24 dev as2host-eth0' %i)
+    as2host.setIP('1.168.30.100', 24, 'as2host-eth1')
+    
+    as2host.cmd('ip route add default via 3.0.0.254')
+    
+    # Set up AS3
+    host4.setMAC('00:00:00:00:03:01', 'host4-eth0.30')
+    host4.setIP('4.0.0.254', 8, 'host4-eth1')
+    host4.setMAC('00:00:00:00:03:99', 'host4-eth1')
+    host4.cmd('sysctl net.ipv4.conf.all.forwarding=1')
+    as3host = net.get('as3host')
+    for i in range(0, 20):
+        as3host.cmd('sudo ip addr add 4.0.%d.1/24 dev as3host-eth0' %i)
+    as3host.cmd('ip route add default via 4.0.0.254')
+    
+    host4.setIP('10.0.0.4', 24, 'host4-eth2')
+    host4.setMAC('00:00:00:00:03:33', 'host4-eth2')
+    
+    #root space
+    host4.setIP('1.168.30.3', 24, 'host4-eth3')
+    host4.setMAC('00:00:00:00:03:03', 'host4-eth3')
+    
+    # Set up AS4
+    #as4host = net.get('as4host')
+    #as4host.defaultIntf().setIP('172.16.40.1/24')
+    #as4host.cmd('ip route add default via 172.16.40.254')
+    
+    # setup interface address for 100 quagga hosts
+    time.sleep(10)
+    #for i in range(numHost101, numHost200 + 1):
+        #host100 = net.get('host' + str(i))
+        #host100.cmd(str(i)+'.0.1.254', 24, 'host'+str(i)+'-eth1')
+        #as4host100 = net.get('as4host%s' %(i))
+        #as4host100.defaultIntf().setIP(str(i) + '.0.0.1/24')
+        #as4host100.cmd('ip route add default via ' + str(i) + '.0.0.254')
+        #for j in range(0, 100):
+            #as4host100.cmd('sudo ip addr add %d.0.%d.1/24 dev %s-eth0' %(i, j, as4host100))
+
+    # Set up AS6 - This has a router and a route server
+    as6rs, host5 = net.get('as6rs', 'host5')
+
+    as6rs.setMAC('00:00:00:06:06:01', 'as6rs-eth0')
+    as6rs.setIP('1.168.30.6', 24, 'as6rs-eth1')
+    as6rs.setMAC('00:00:00:06:06:06', 'as6rs-eth1')
+
+    host5.setMAC('00:00:00:00:06:02', 'host5-eth0.60')
+    #as6router.setIP('172.16.60.254', 24, 'as6router-eth1')
+    host5.setIP('5.0.0.254', 8, 'host5-eth1')
+    host5.cmd('sysctl net.ipv4.conf.all.forwarding=1')
+    host5.setIP('10.0.0.5', 24, 'host5-eth2')
+    host5.setMAC('00:00:00:00:06:66', 'host5-eth2')
+    host5.setIP('1.168.30.5', 24, 'host5-eth3')
+    host5.setMAC('00:00:00:00:06:05', 'host5-eth3')
+
+    as6host = net.get('as6host')
+    #as6host.defaultIntf().setIP('5.0.0.1/24')
+    for i in range(0, 10):
+        as6host.cmd('sudo ip addr add 5.0.%d.1/24 dev as6host-eth0' %i)
+    as6host.cmd('ip route add default via 5.0.0.254')
+
+    # test the host in the as6
+    #for i in range(1, 10):
+    #    baseip = (i-1)*4
+    #    host = net.get('as6host%d' % i)
+    #    host.defaultIntf().setIP('172.16.70.%d/24' % (baseip+1))
+    #    host.cmd('ip route add default via 172.16.70.%d' % (baseip+2))
+     #   as6router.setIP('172.16.70.%d' % (baseip+2), 30, 'as6router-eth%d' % (i+1))
+
+    # Start Quagga on border routers
+    startquagga(host3, 1, QUAGGA_CONFIG_FILE_DIR + '/quagga1.conf')
+    startquagga(host4, 2, QUAGGA_CONFIG_FILE_DIR + '/quagga2.conf')
+    #for i in range(numHost101, numHost200 + 1):
+        #host100=net.get('host%d' % (i))
+        #startquaggahost5(host100, i)
+
+    startquagga(as6rs, 4, QUAGGA_CONFIG_FILE_DIR + '/quagga-as6-rs.conf')
+    startquagga(host5, 5, QUAGGA_CONFIG_FILE_DIR + '/quagga-as6.conf')
+
+    #root1, root2, rootTestOn  = net.get( 'root1', 'root2', 'rootTestOn' )
+    root1, rootTestOn  = net.get( 'root1', 'rootTestOn' )
+    host1.intf('host1-eth1').setIP('1.1.1.1/24')
+    root1.intf('root1-eth0').setIP('1.1.1.2/24')
+    #host2.intf('host2-eth1').setIP('1.1.2.1/24')
+    #root2.intf('root2-eth0').setIP('1.1.2.2/24')
+    
+    #rootTestOn.cmd('ip addr add 1.168.30.102/24 dev rootTestOn-eth0')
+    rootTestOn.cmd('ip addr add 1.168.30.99/24 dev rootTestOn-eth0')
+    
+    stopsshd()    
+
+    startquagga(host1, 100, QUAGGA_CONFIG_FILE_DIR + '/quagga-sdn-modified.conf')    
+    hosts = [ host1, host3, host4, host5, as2host, as6rs ];
+    #sshdHosts = sshdHosts + hosts
+    startsshds( hosts )
+    #
+    onos1 = '127.0.0.1'
+    forwarding1 = '%s:2000:%s:2000' % ('1.1.1.2', onos1)
+    root1.cmd( 'ssh -nNT -o "PasswordAuthentication no" -o "StrictHostKeyChecking no" -l sdn -L %s %s & ' % (forwarding1, onos1) )
+
+    # Forward 2605 to root namespace for easier access to SDN domain BGPd
+    # If root can ssh to itself without a password this should work
+    root1.cmd('ssh -N -o "PasswordAuthentication no" -o "StrictHostKeyChecking no" -L 2605:1.1.1.1:2605 1.1.1.1 &')
+    #time.sleep(3000000000)
+    CLI( net )
+
+    # Close the ssh port forwarding
+    #quietRun('sudo pkill -f 1.1.1.1')
+
+    stopsshd()
+    stopquagga()
+    net.stop()
+
+if __name__ == '__main__':
+    setLogLevel( 'debug' )
+    if len(sys.argv) > 1:
+        QUAGGA_CONFIG_FILE_DIR = sys.argv[1]
+    sdn1net()
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-as6-rs.conf b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-as6-rs.conf
new file mode 100644
index 0000000..1eac0dd
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-as6-rs.conf
@@ -0,0 +1,32 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64520
+  bgp router-id 192.168.60.1
+  neighbor 192.168.60.101 remote-as 64513
+  neighbor 192.168.60.101 route-server-client
+  neighbor 192.168.60.2 remote-as 64521 
+  neighbor 192.168.60.2 route-server-client
+! network 172.16.60.0/24
+! neighbor 10.0.0.2 route-map set-nexthop out
+! neighbor 10.0.0.2 ebgp-multihop
+! neighbor 10.0.0.2 next-hop-self
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-as6.conf b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-as6.conf
new file mode 100644
index 0000000..19cc140
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-as6.conf
@@ -0,0 +1,39 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64521
+  bgp router-id 192.168.60.2
+  neighbor 192.168.60.1 remote-as 64520
+  neighbor 10.0.0.4 remote-as 64516
+! neighbor 192.168.60.3 remote-as 64520
+!  network 172.16.60.0/24
+!  network 172.16.70.4/30
+ ! network 172.16.70.8/30
+ ! network 172.16.70.12/30
+ ! network 172.16.70.16/30
+ ! network 172.16.70.20/30
+ ! network 172.16.70.24/30
+ ! network 172.16.70.28/30
+ ! network 172.16.70.32/30
+! neighbor 10.0.0.2 route-map set-nexthop out
+! neighbor 10.0.0.2 ebgp-multihop
+! neighbor 10.0.0.2 next-hop-self
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-sdn-modified.conf b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-sdn-modified.conf
new file mode 100644
index 0000000..bf37a60
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga-sdn-modified.conf
@@ -0,0 +1,49 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+route-map AS65000 permit 1
+  set as-path prepend 65000
+!
+router bgp 64513
+  bgp router-id 192.168.10.101
+  timers bgp 1 3
+  !timers bgp 3 9 
+  neighbor 192.168.10.1 remote-as 64514
+  neighbor 192.168.10.1 ebgp-multihop
+  neighbor 192.168.10.1 timers connect 5
+  neighbor 192.168.20.1 remote-as 64514
+  neighbor 192.168.20.1 ebgp-multihop
+  neighbor 192.168.20.1 timers connect 5
+  neighbor 192.168.20.1 route-map AS65000 in
+  neighbor 192.168.30.1 remote-as 64516
+  neighbor 192.168.30.1 ebgp-multihop
+  neighbor 192.168.30.1 timers connect 5
+  neighbor 192.168.60.1 remote-as 64520
+  neighbor 192.168.60.1 ebgp-multihop
+  neighbor 192.168.60.1 timers connect 5
+  neighbor 1.1.1.2 remote-as 64513
+  neighbor 1.1.1.2 port 2000
+  neighbor 1.1.1.2 timers connect 5
+
+
+
+  network 172.16.10.0/24
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga1.conf b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga1.conf
new file mode 100644
index 0000000..264f85e
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga1.conf
@@ -0,0 +1,32 @@
+!
+! Zebra configuration saved from vty
+!   2014/11/25 11:22:24
+!
+hostname bgpd
+password hello
+log stdout
+!
+router bgp 64514
+ bgp router-id 192.168.10.1
+! network 3.0.0.0/24
+! network 3.0.1.0/24
+! network 3.0.2.0/24
+! network 3.0.3.0/24
+! network 3.0.4.0/24
+! network 3.0.5.0/24
+! network 3.0.6.0/24
+! network 3.0.7.0/24
+! network 3.0.8.0/24
+! network 3.0.9.0/24
+ neighbor 192.168.20.101 remote-as 64513
+ neighbor 192.168.20.101 route-map PREPEND2 in
+ neighbor 192.168.20.101 route-map PREPEND2 out
+!
+route-map PREPEND1 permit 1
+ set as-path prepend 64514
+!
+route-map PREPEND2 permit 2
+ set as-path prepend 64514 64514
+!
+line vty
+!
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga2.conf b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga2.conf
new file mode 100644
index 0000000..14c7d67
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/quagga2.conf
@@ -0,0 +1,32 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64516
+  bgp router-id 192.168.30.1
+!  timers bgp 1 3
+  neighbor 192.168.30.101 remote-as 64513
+  neighbor 10.0.0.5 remote-as 64521
+! neighbor 192.168.50.2   remote-as 65001
+! network 172.16.30.0/24
+! neighbor 10.0.0.2 route-map set-nexthop out
+! neighbor 10.0.0.2 ebgp-multihop
+! neighbor 10.0.0.2 next-hop-self
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/zebra.conf b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/zebra.conf
new file mode 100644
index 0000000..0f8e3a2
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/mininet/zebra.conf
@@ -0,0 +1,26 @@
+! -*- zebra -*-
+!
+! zebra sample configuration file
+!
+! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
+!
+hostname zebra 
+password hello
+enable password 0fw0rk
+log stdout
+!
+! Interfaces description.
+!
+!interface lo
+! description test of desc.
+!
+!interface sit0
+! multicast
+
+!
+! Static default route sample.
+!
+!ip route 0.0.0.0/0 203.181.89.241
+!
+
+!log file /usr/local/var/log/quagga/zebra.log
diff --git a/TestON/tests/PeeringRouterTest/vlan/routeserver/sdnip.json b/TestON/tests/PeeringRouterTest/vlan/routeserver/sdnip.json
new file mode 100644
index 0000000..f3117c6
--- /dev/null
+++ b/TestON/tests/PeeringRouterTest/vlan/routeserver/sdnip.json
@@ -0,0 +1,59 @@
+{
+   
+    "bgpPeers" : [
+		{
+		    "attachmentDpid" : "00:00:00:00:00:00:00:01",
+		    "attachmentPort" : "1",
+		    "ipAddress" : "192.168.10.1"
+		},
+		{
+		    "attachmentDpid" : "00:00:00:00:00:00:00:01",
+		    "attachmentPort" : "2",
+		    "ipAddress" : "192.168.20.1"
+		},
+		{
+		    "attachmentDpid" : "00:00:00:00:00:00:00:01",
+		    "attachmentPort" : "3",
+		    "ipAddress" : "192.168.30.1"
+		},
+		{
+		    "attachmentDpid" : "00:00:00:00:00:00:00:01",
+		    "attachmentPort" : "4",
+		    "ipAddress" : "192.168.60.1"
+		}
+
+    ],
+    "bgpSpeakers" : [
+	    {
+	    	 "name" : "bgpSpeaker1",
+	    	 "attachmentDpid" : "00:00:00:00:00:00:00:02",
+	         "attachmentPort" : "1",
+	         "macAddress" : "00:00:00:00:00:02",
+	         "interfaceAddresses" : [
+				{
+				    "interfaceDpid" : "00:00:00:00:00:00:00:01",
+		  		    "interfacePort" : "1",
+				    "ipAddress" : "192.168.10.101"
+				},
+				{
+				    "interfaceDpid" : "00:00:00:00:00:00:00:01",
+		       		    "interfacePort" : "2",
+				    "ipAddress" : "192.168.20.101"
+				},
+				{
+				    "interfaceDpid" : "00:00:00:00:00:00:00:01",
+		       		    "interfacePort" : "3",
+				    "ipAddress" : "192.168.30.101"
+				},
+				{
+				    "interfaceDpid" : "00:00:00:00:00:00:00:01",
+		       		    "interfacePort" : "4",
+				    "ipAddress" : "192.168.60.101"
+				}
+		
+		    ]
+	         
+	    }
+   	
+    ]
+}